Trail Length Research Articles

EVOLUTION OF THE DUST SIZE DISTRIBUTION OF COMET 67P/CHURYUMOV–GERASIMENKO FROM 2.2 au TO PERIHELION

ABSTRACT The Rosetta probe, orbiting Jupiter-family comet 67P/Churyumov–Gerasimenko, has been detecting individual dust particles of mass larger than 10−10 kg by means of the GIADA dust collector and the OSIRIS Wide Angle Camera and Narrow Angle Camera since 2014 August and will continue until 2016 September. Detections of single dust particles allow us to estimate the anisotropic dust flux from 67P, infer the dust loss rate and size distribution at the surface of the sunlit nucleus, and see whether the dust size distribution of 67P evolves in time. The velocity of the Rosetta orbiter, relative to 67P, is much lower than the dust velocity measured by GIADA, thus dust counts when GIADA is nadir-pointing will directly provide the dust flux. In OSIRIS observations, the dust flux is derived from the measurement of the dust space density close to the spacecraft. Under the assumption of radial expansion of the dust, observations in the nadir direction provide the distance of the particles by measuring their trail length, with a parallax baseline determined by the motion of the spacecraft. The dust size distribution at sizes >1 mm observed by OSIRIS is consistent with a differential power index of −4, which was derived from models of 67P’s trail. At sizes <1 mm, the size distribution observed by GIADA shows a strong time evolution, with a differential power index drifting from −2 beyond 2 au to −3.7 at perihelion, in agreement with the evolution derived from coma and tail models based on ground-based data. The refractory-to-water mass ratio of the nucleus is close to six during the entire inbound orbit and at perihelion.

Estimating Soil Displacement from Timber Extraction Trails in Steep Terrain: Application of an Unmanned Aircraft for 3D Modelling

Skid trails constructed for timber extraction in steep terrain constitute a serious environmental concern if not well planned, executed and ameliorated. Carrying out post-harvest surveys in monitoring constructed trails in such terrain is an onerous task for forest administrators, as hundreds of meters need to be surveyed per site, and the quantification of parameters and volumes is largely based on assumptions of trail symmetry and terrain uniformity. In this study, aerial imagery captured from a multi-rotor Unmanned Aerial Vehicle was used in generating a detailed post-harvest terrain model which included all skid trails. This was then compared with an Airborne Laser Scanning derived pre-harvest terrain model and the dimensions, slopes and cut-and-fill volumes associated with the skid trails were determined. The overall skid trail length was 954 m, or 381 m·ha−1 with segments varying from 40–60 m, inclinations from 3.9% to 9.6%, and cut volumes, from 1.7 to 3.7 m3 per running meter. The methods used in this work can be used in rapidly assessing the extent of disturbance and erosion risk on a wide range of sites. The multi-rotor Unmanned Aerial Vehicle (UAV) was found to be highly suited to the task, given the relatively small size of harvested stands, their shape and their location in the mountainous terrain.

Distribution, Demography, and Conservation of Lion-tailed Macaques (Macaca silenus) in the Anamalai Hills Landscape, Western Ghats, India

The status of the endemic and endangered lion-tailed macaque (Macaca silenus) has not been properly assessed in several regions of the Western Ghats of southern India. We conducted a study in Parambikulam Forest Reserve in the state of Kerala to determine the distribution, demography, and status of lion-tailed macaques. We laid 5km2 grid cells on the map of the study area (644km2) and made four replicated walks in each grid cell using GPS. We gathered data on lion-tailed macaque group locations, demography, and site covariates including trail length, duration of walk, proportion of evergreen forest, height of tallest trees, and human disturbance index. We also performed occupancy modeling using PRESENCE ver. 3.0. We estimated a minimum of 17 groups of macaques in these hills. Low detection and occupancy probabilities indicated a low density of lion-tailed macaques in the study area. Height of the tallest trees correlated positively whereas human disturbance and proportion of evergreen forest correlated negatively with occupancy in grid cells. We also used data from earlier studies carried out in the surrounding Anamalai Tiger Reserve and Nelliyampathy Hills to discuss the conservation status in the large Anamalai Hills Landscape. This landscape harbors an estimated population of 1108 individuals of lion-tailed macaques, which is about one third of the entire estimated wild population of this species. A conservation plan for this landscape could be used as a model for conservation in other regions of the Western Ghats.

Efficiency and robustness of ant colony transportation networks

Efficient and robust transportation networks are key to the effectiveness of many natural systems. In polydomous ant colonies, which consist of two or more spatially separated but socially connected nests, resources must be transported between nests. In this study, we analyse the network structure of the inter-nest trails formed by natural polydomous ant colonies. In contrast to previous laboratory studies, the natural colonies in our study do not form minimum spanning tree networks. Instead the networks contain extra connections, suggesting that in natural colonies, robustness may be an important factor in network construction. Spatial analysis shows that nests are randomly distributed within the colony boundary and we find nests are most likely to connect to their nearest neighbours. However, the network structure is not entirely determined by spatial associations. By showing that the networks do not minimise total trail length and are not determined only by spatial associations, the results suggest that the inter-nest networks produced by ant colonies are influenced by previously unconsidered factors. We show that the transportation networks of polydomous ant colonies balance trail costs with the construction of networks that enable efficient transportation of resources. These networks therefore provide excellent examples of effective biological transport networks which may provide insight into the design and management of transportation systems.

Certified and Uncertified Logging Concessions Compared in Gabon: Changes in Stand Structure, Tree Species, and Biomass

Forest management certification is assumed to promote sustainable forest management, but there is little field-based evidence to support this claim. To help fill this gap, we compared a Forest Stewardship Council (FSC)-certified with an adjacent uncertified, conventionally logged concession (CL) in Gabon on the basis of logging damage, above-ground biomass (AGB), and tree species diversity and composition. Before logging, we marked, mapped, and measured all trees >10cm dbh in 20 and twelve 1-ha permanent plots in the FSC and CL areas, respectively. Soil and tree damage due to felling, skidding, and road-related activities was then assessed 2-3months after the 508ha FSC study area and the 200ha CL study area were selectively logged at respective intensities of 5.7m(3)/ha (0.39 trees/ha) and 11.4m(3)/ha (0.76 trees/ha). For each tree felled, averages of 9.1 and 20.9 other trees were damaged in the FSC and CL plots, respectively; when expressed as the impacts per timber volume extracted, the values did not differ between the two treatments. Skid trails covered 2.9% more of the CL surface, but skid trail length per unit timber volume extracted was not greater. Logging roads were wider in the CL than FSC site and disturbed 4.7% more of the surface. Overall, logging caused declines in AGB of 7.1 and 13.4% at the FSC and CL sites, respectively. Changes in tree species composition were small but greater for the CL site. Based on these findings and in light of the pseudoreplicated study design with less-than perfect counterfactual, we cautiously conclude that certification yields environmental benefits even after accounting for differences in logging intensities.

Improved Asteroid Astrometry and Photometry with Trail Fitting

ABSTRACTAsteroid detections in astronomical images may appear as trails due to a combination of their apparent rate of motion and exposure duration. Nearby asteroids in particular typically have high apparent rates of motion and acceleration. Their recovery, especially on their discovery apparition, depends upon obtaining good astrometry from the trailed detections. We present an analytic function describing a trailed detection under the assumption of a Gaussian point spread function (PSF) and constant rate of motion. We have fit the function to both synthetic and real trailed asteroid detections from the Pan-STARRS1 survey telescope to obtain accurate astrometry and photometry. For short trails our trailing function yields the same astrometric and photometry accuracy as a functionally simpler two-dimensional Gaussian but the latter underestimates the length of the trail—a parameter that can be important for measuring the object’s rate of motion and assessing its cometary activity. For trails longer than about 10 pixels (∼3× PSF) our trail fitting provides ∼3× better astrometric accuracy and up to two magnitudes improvement in the photometry. The trail fitting algorithm can be implemented at the source detection level for all detections to provide trail length and position angle that can be used to reduce the false tracklet rate.

On paths, trails and closed trails in edge-colored graphs

Graph Theory In this paper we deal from an algorithmic perspective with different questions regarding properly edge-colored (or PEC) paths, trails and closed trails. Given a c-edge-colored graph G(c), we show how to polynomially determine, if any, a PEC closed trail subgraph whose number of visits at each vertex is specified before hand. As a consequence, we solve a number of interesting related problems. For instance, given subset S of vertices in G(c), we show how to maximize in polynomial time the number of S-restricted vertex (resp., edge) disjoint PEC paths (resp., trails) in G(c) with endpoints in S. Further, if G(c) contains no PEC closed trails, we show that the problem of finding a PEC s-t trail visiting a given subset of vertices can be solved in polynomial time and prove that it becomes NP-complete if we are restricted to graphs with no PEC cycles. We also deal with graphs G(c) containing no (almost) PEC cycles or closed trails through s or t. We prove that finding 2 PEC s-t paths (resp., trails) with length at most L > 0 is NP-complete in the strong sense even for graphs with maximum degree equal to 3 and present an approximation algorithm for computing k vertex (resp., edge) disjoint PEC s-t paths (resp., trails) so that the maximum path (resp., trail) length is no more than k times the PEC path (resp., trail) length in an optimal solution. Further, we prove that finding 2 vertex disjoint s-t paths with exactly one PEC s-t path is NP-complete. This result is interesting since as proved in Abouelaoualim et. al.(2008), the determination of two or more vertex disjoint PEC s-t paths can be done in polynomial time. Finally, if G(c) is an arbitrary c-edge-colored graph with maximum vertex degree equal to four, we prove that finding two monochromatic vertex disjoint s-t paths with different colors is NP-complete. We also propose some related problems.

Critical size of self-propelled motion of droplets on GaAs (100) surface

The running liquid Ga droplets on GaAs surface (001) are presented and analyzed by scanning electron microscope and atomic force microscope. Self-motion of Ga droplet on GaAs surface is confirmed by microscope measurements. The liquid droplets are found to move with an initial critical diameter and constantly increase size during motion. The critical diameter of moving Ga droplets is observed to be 1.9 μm on GaAs (011) surface at preparation temperature 680 °C. A linear relationship is found between droplet diameter and trail length. These experiment results are qualitatively analyzed to understand the phenomenon of self-running Ga droplets on GaAs surface.

DESIGNING AN OPTIMAL FOREST ROAD NETWORK BY CONSIDERATION OF ENVIRONMENTAL IMPACTS IN GIS OPTIMALIŲ MIŠKO KELIŲ TINKLO PROJEKTAVIMAS ĮVERTINUS POVEIKĮ APLINKAI GIS PROGRAMA / ПРОЕКТИРОВАНИЕ OПTИMAЛЬHOЙ CETИ ЛECHЫX ДOPOГ С УЧЕТОМ BOЗДEЙCTBИЯ HA OKPYЖAЮЩYЮ CPEДY, ОЦЕНЕННОГО С ИСПОЛЬЗОВАНИЕМ ГИС

Planning of forest road network is the most important issue for sustainable management of northern forests in Iran. This study represented a technical method of forest road planning by using GIS (Geographic Information Systems) in Vatan forestry plan of Golestan province, Iran. The aim of this study was to find out options for the optimization of skid trail length and for decreasing the negative effects of redundant skid trail length. Results of this study showed that the total length of forest road and the road network density was 36745 m and 8.68 m ha−1, respectively. 54% of the area was covered by these roads. 98.06 km skid trail was planned from road verge into the forest interior. The density of this skidding trail was 23.17 m ha−1. The suggested road network length measured using GIS was 47.23 km. Road density was 10.87 m ha−1, with 79% coverage. Skid trail length was 81.04 km, and skid trail density was 19.15 m ha−1. On the basis of GIS measurements, the skid trails on new road network system had shorter length and more frequency. This causes to decrease the cost of primary transportation. Moreover, in this plan the roads with suitable coverage passed from stable slopes. Santrauka Miško kelių tinklo planavimas – viena svarstomų problemų, siekiant užtikrinti tvarią miškotvarkos sistemą šiaurinėje Irano dalyje esančiuose miškuose. Šiame straipsnyje pristatomas miško kelių planavimo techninis metodas, taikant GIS (geografinės informacinės sistemos) programą ir naudojant Vatan miško, Golestan provincijoje, Irane, planus. Šio tyrimo tikslas – išsiaiškinti galimybes, kaip optimizuoti miško keliukų ilgį ir sumažinti neigiamą poveikį miškui, mažinant perteklinį šių keliukų trasos ilgį. Pirminiai rezultatai parodė, kad bendras esamų kelių ilgis siekia 36 745 km, kelių tinklas aprėpė 54% visos tiriamosios teritorijos, tankis siekė 8,68 m ha−1, o optimalus miško kelių tinklas buvo rengiamas pagal esamą 98,06 km ilgio miško keliukų tinklą, kurio tankis – 23,17 m ha−1. Bendras siūlomo kelių tinklo ilgis siekia 47,23 km, tankumas – 10,87 m ha−1, jis aprėpia 79% teritorijos. Miško keliukų ilgis – 81,04 km, tankumas – 19,15 m·ha−1. Remiantis GIS matavimais, naujo miško keliukų tinklo keliukai buvo trumpesni, tačiau jų tinklas tankesnis. Dėl šios priežasties mažėja pirminės transporto išlaidos ir sukuriama optimali miško keliukų aprėptis, pagerinamas prieinamumas. Резюме Планирование сети лесных дорог является одним из важнейших вопросов при создании упорядоченной системылесохозяйствования в северной части Ирана. В статье представлен технический метод планирования лесохозяйственной деятельности (прокладки дорог) с использованием ГИС и плана леса Ватан в провинции Гулистан Ирана. Целью исследования было выяснить возможности оптимизации длины лесных дорог и уменьшениянегативных последствий их избыточной длины. Результаты исследования показали, что общая протяженность существующих лесных дорог составляет 36 745 км, сеть дорог охватывает 54% всей исследованной территории,ее плотность – 8,68 м га−1. Оптимальная сеть лесных дорог создавалась на основании имеющейся сети лесных дорог, протяженность которой 98,06 км, плотность – 23,17 м гa−1. Протяженность предлагаемой сети дорог составит 47,23 км, плотность – 10,87 м гa−1, она охватит 79% территории. Длина лесных дорог составит 81,04 км, а плотность – 19,15 м·гa−1. На основании измерений, проведенных с использованием ГИС, длина дорог лесной сети стала короче, а сеть более густой. В связи с этим снижаются первичные затраты на транспорт, охват леснымидорогами становится более оптимальным, увеличивается доступность.

Allometric scaling of foraging rate with trail dimensions in leaf-cutting ants

Leaf-cutting ants (Atta spp.) create physical pathways to support the transport of resources on which colony growth and reproduction depend. We determined the scaling relationship between the rate of resource acquisition and the size of the trail system and foraging workforce for 18 colonies of Atta colombica and Atta cephalotes. We examined conventional power-law scaling patterns, but did so in a multivariate analysis that reveals the simultaneous effects of forager number, trail length and trail width. Foraging rate (number of resource-laden ants returning to the nest per unit time) scaled at the 0.93 power of worker numbers, the -1.02 power of total trail length and the 0.65 power of trail width. These scaling exponents indicate that individual performance declines only slightly as more foragers are recruited to the workforce, but that trail length imposes a severe penalty on the foraging rate. A model of mass traffic flow predicts the allometric patterns for workforce and trail length, although the effect of trail width is unexpected and points to the importance of the little-known mechanisms that regulate a colony's investment in trail clearance. These results provide a point of comparison for the role that resource flows may play in allometric scaling patterns in other transport-dependent entities, such as human cities.

Analyzing the Impacts of Off-Road Vehicle (ORV) Trails on Watershed Processes in Wrangell-St. Elias National Park and Preserve, Alaska

Trails created by off-road vehicles (ORV) in boreal lowlands are known to cause local impacts, such as denuded vegetation, soil erosion, and permafrost thaw, but impacts on stream and watershed processes are less certain. In Wrangell-St. Elias National Park and Preserve (WRST), Alaska, ORV trails have caused local resource damage in intermountain lowlands with permafrost soils and abundant wetlands and there is a need to know whether these impacts are more extensive. Comparison of aerial photography from 1957, 1981, and 2004 coupled with ground surveys in 2009 reveal an increase in trail length and number and show an upslope expansion of a trail system around points of stream channel initiation. We hypothesized that these impacts could also cause premature initiation and headward expansion of channels because of lowered soil resistance and greater runoff accumulation as trails migrate upslope. Soil monitoring showed earlier and deeper thaw of the active layer in and adjacent to trails compared to reference sites. Several rainfall-runoff events during the summer of 2009 showed increased and sustained flow accumulation below trail crossings and channel shear forces sufficient to cause headward erosion of silt and peat soils. These observations of trail evolution relative to stream and wetland crossings together with process studies suggest that ORV trails are altering watershed processes. These changes in watershed processes appear to result in increasing drainage density and may also alter downstream flow regimes, water quality, and aquatic habitat. Addressing local land-use disturbances in boreal and arctic parklands with permafrost soils, such as WRST, where responses to climate change may be causing concurrent shifts in watershed processes, represents an important challenge facing resource managers.

Terrain Susceptibility to Geomorphological Processes and their Impact on Tourism Infrastructure in the Sâmbata Valley (Făgăraş Mountains, Romania)

Abstract The Sâmbata Valley is located in the north-eastern part of the Fagaras Mts, an area with a varied range of present geomorphologic processes which manifest with different intensities in space and time. The remarkable morphodynamic energy and favourability to erosion processes in the context of overgrazing exploitation and extreme weather events are the main features of the analysed mountain area. On this background of high morphodynamic potential, the geomorphological processes have a strong impact on existing tourist facilities from degradation to total destruction. The morphodynamic potential is related to morphometrical data and meteorological parameters and a GIS analysis is conducted in order to obtain the terrain susceptibility to geomorphological processes map. The synthesis map of terrain susceptibility to geomorphological processes groups different areas within six classes of susceptibility depending on the types and intensity of geomorphological processes (areas affected by geomorphological processes, areas with very high susceptibility, areas with high susceptibility, areas with moderate susceptibility, areas with low susceptibility, areas with very low susceptibility). The analysis of trail susceptibility to damage due to geomorphological processes reveals a major percent of trail length that presents very high susceptibility to damage (38.9%). Having in view the fact that the paths system from the Fagaras Mountains is relatively old, the pretty high anthropic impact and the geomorphologic processes which affect it, it has to be reconditioned, by following the principles of modern trail-building.

Making channeling visible: keV noble gas ion trails on Pt(111)

The impact of argon and xenon noble gas ions on Pt(111) in grazing incidence geometry are studied through direct comparison of scanning tunneling microscopy images and molecular dynamics simulations. The energy range investigated is 1–15 keV and the angles of incidence with respect to the surface normal are between 78.5° and 88°. The focus of the paper is on events where ions gently enter the crystal at steps and are guided in channels between the top most layers of the crystal. The trajectories of the subsurface channeled ions are visible as trails of surface damage. The mechanism of trail formation is analyzed using simulations and analytical theory. Significant differences between Xe+ and Ar+ projectiles in damage, in the onset energy of subsurface channeling as well as in ion energy dependence of trail length and appearance are traced back to the projectile and ion energy dependence of the stopping force. The asymmetry of damage production with respect to the ion trajectory direction is explained through the details of the channel shape and subchannel structure as calculated from the continuum approximation of the channel potential. Measured and simulated channel switching in directions normal and parallel to the surface as well as an increase of ions entering into channels from the perfect surface with increasing angles of incidence are discussed.

Do disturbance and productivity influence evenness of seedling, sapling and adult tree species across a semi‐deciduous tropical forest landscape?

Disturbance and productivity may influence and alter community structure by affecting the partitioning of resources among species. Here, we examined how evenness in the relative abundance of growth stages (seedlings, saplings and adults) of woody species is related to measures of productivity (i.e. total diameter breast high (dbh) and tree volume) and aspects of human disturbance (i.e. number of tree stumps, area covered by charcoal making holes and trail length) in a bamboo‐deciduous forest, northeastern of Thailand. Our results using stepwise multiple regressions showed that productivity (total dbh) explained a significant part of the variation in evenness only at the adult stage where evenness decreased with productivity. We found a decreased evenness of saplings with the area covered by charcoal making holes. Evenness of seedlings was not related to productivity or human disturbance variables and other environmental variables contribute more to explain the variation in evenness at this stage. Evenness was correlated consistently between the growth stages but the strength of relationships diminishes across the stages. Our results suggest that high productivity and human disturbance may facilitate competitive dominant species, affecting evenness in woody communities.

A Comparison of Residual Stand Damage along Yarding Trails in a Group Selection Harvest Using Four Different Yarding Methods

Abstract A study of residual stand damage along yarding trails associated with four harvest methods—harvester/forwarder and cable skidder, tractor, and bulldozer with chainsaw felling—was conducted in a group selection harvest of a mixed hardwood stand in Maine. Tractive yardingmethods were associated with greater numbers of damaged trees per meter of trail length. In addition, the bulldozer method resulted in the largest number of damaged boles per 100 m2 of near-trail space, whereas the smallest number of damaged boles per 100 m2 was associatedwith the forwarder method. The tractor method resulted in the most root damage, and the forwarder method resulted in the largest trail width. These results have implications for equipment selection and the planning of harvests and harvest access systems.

Recreational Demand for Equestrian Trail-Riding

Using data collected from a combination of on-site and on-line surveys, this study examines recreational demand for equestrian trail-riding in Kentucky. A truncated, negative binomial regression is applied to analyze individuals’ visitation behavior consistent with a travel cost model. Results suggest that distance is the most significant determinant of average annual visits to a particular site. Various trail site characteristics, such as trail length, scenic overlooks, and trail markers, affect the number of visits an individual takes. Geographic information system (GIS) analysis permits the identification of equestrian population centers. Information obtained from this study offers a decision base for policymakers to use to manage existing equestrian trails and locate new ones.

A comparison of damage due to logging under different forms of resource access in East Kalimantan, Indonesia

Recent changes in forest resource access arrangements have important implications for the future extent and quality of natural forest in Indonesia. This study quantified and compared total harvested and damaged trees after logging operations carried out in East Kalimantan, Indonesia under two types of arrangements: 20-year commercial selective logging concessions, known as Hak Pengusahaan Hutan (HPH) and 1-year harvest permits intended for local communities, known as Ijin Pemungutan dan Pemanfaatan Kayu (IPPK). Sample plots of 20 ha were established in areas previously harvested by HPH and IPPK. Harvest levels were lower than those documented in other logging studies in Borneo, although it is possible that missing and therefore uncounted stumps of harvested trees in cleared areas (i.e. log landings and roads) and larger plots size may have underestimated harvest levels. Significant differences were found between HPH selective logging and IPPK permit holders (1 trees ha −1 and 4 trees ha −1, respectively). It was found that IPPK permit holders harvested a larger percentage of trees below 50 cm dbh than did HPH logging (>25% as compared to 3%, respectively). IPPK permit holders operations also damaged twice as many residual trees below 50 cm dbh per unit area as did HPH harvests. However, HPH produced higher levels of damage per unit volume and number trees harvested, in terms of skid trail length, number of trees damaged, and canopy opening. The sum of the harvested and damaged trees, which may be lost from future harvest due to rot and mortality after harvesting, was significantly different under short-term permit holders and selective logging concessionaires (28 trees ha −1 versus 9 trees ha −1 in primary forest; 39 trees ha −1 versus 28 trees ha −1 in logged-over forest). Future harvest potential of the forest may be significantly lower with the influence of IPPK logging system, in terms of harvesting practices and logging damaged to the forest stands.

Effect of a T-shaped plate on reduction in fluid forces on two tandem cylinders in a cross-flow

The effect of a T-shaped plate on reduction in fluid forces on two tandem circular cylinders in a uniform cross-flow was examined at a Reynolds number of 6.5×10 4. The T-shaped plate, with a head-width of 5 mm (one-tenth of cylinder diameter), is used as the control object to control the approaching flow onto the upstream cylinder, resulting in reduction in fluid forces on the cylinders. The trail length of the T-shaped plate was varied in order to bring the head of the T-shaped plate in action at different positions so that an optimum position of the head of the T-shaped plate for reducing fluid forces could be identified. From the result, it was found that, when the T-shaped plate with a trail length of 0.70–1.00 times the cylinder diameter is used, an optimum reduction in fluid forces occurs, and the interference effect of the downstream cylinder on the upstream cylinder is completely suppressed.

Early genetic effects on workers occupationally exposed to formaldehyde

To investigate the DNA and chromosome damage in peripheral blood lymphocyte of workers occupationally exposed to formaldehyde (FA). All 151 workers occupationally exposed to FA from two plywood factories and 112 workers without occupational FA exposure working in a machine manufactory were recruited into this study. Comet assay and cytokinesis-block micronucleus technique was used to evaluate the DNA and chromosomal damage of peripheral blood lymphocyte. The air FA samples were collected with SKC 224-PCXR8 air samplers. Gas chromatography was used to analyze the FA level. Personal information including occupational history, age, sex, smoking and drinking status was collected by the questionnaire. The time weighted average concentration (TWA) of FA in the working environment of FA-exposed workers (range 0.10 - 7.88 mg/m(3)) was higher than those in controls (< 0.01 mg/m(3)). The olive tail moment (Olive TM) in low FA-exposed workers [3.03 (2.49 - 3.67)] was lower than that in high FA-exposed workers [3.95 (3.53 - 4.43)], but higher than that in controls [0.93 (0.78 - 1.10)], the differences were statistical significant (P < 0.05). Comet trail length in FA-exposed workers were significantly higher than that in controls [6.78 (6.05 - 7.60)], but no significant differences ware found between the high FA-exposed workers [12.59 (11.80 - 13.43)] and the low FA-exposed workers [11.25 (10.12 - 12.50)]. The frequency of micronuclei per 100 binucleated cells in low FA-exposed workers (0.41 +/- 0.25) was lower than that in high FA-exposed workers (0.65 +/- 0.36), but higher than that in controls (0.27 +/- 0.13), the differences were statistical significant (P < 0.05). The increased tendencies with the exposure levels were found in those three indices. In stratification analysis, the same results were found. In the current FA exposure levels, the DNA and chromosomal damage in peripheral blood lymphocyte might be induced by FA exposure, and be increased with the levels of exposure.

Scaling of park trail length and visitation with park area: conservation implications

Analysis of 688 state parks and 41 national parks shows that total trail length in a park has a significant decelerating scaling relationship with park area. Larger parks have much lower trail densities (less trail per acre) than smaller parks. A decelerating scaling pattern is also found when the number of annual visitors is regressed onto park area. Larger parks have fewer visitors per acre of park. Since trails and visitors are major sources of disturbance for many species of wildlife and plants in most reserves, these scaling patterns have important conservation implications.