Traffic Signal Control Algorithm Research Articles

HumanLight: Incentivizing ridesharing via human-centric deep reinforcement learning in traffic signal control

Single occupancy vehicles are the most attractive transportation alternative for many commuters, leading to increased traffic congestion and air pollution. Advancements in information technologies create opportunities for smart solutions that incentivize ridesharing and mode shift to higher occupancy vehicles (HOVs) to achieve the car lighter vision of cities. In this study, we present HumanLight, a novel decentralized adaptive traffic signal control algorithm designed to optimize people throughput at intersections. Our proposed controller is founded on reinforcement learning with the reward function embedding the transportation-inspired concept of pressure at the person-level. By rewarding HOV commuters with travel time savings for their efforts to merge into a single ride, HumanLight achieves equitable allocation of green times. Apart from adopting FRAP, a state-of-the-art (SOTA) base model, HumanLight introduces the concept of active vehicles, loosely defined as vehicles in proximity to the intersection within the action interval window. The proposed algorithm showcases significant headroom and scalability in different network configurations considering multimodal vehicle splits at various scenarios of HOV adoption. Improvements in person delays and queues range from 15% to over 55% compared to vehicle-level SOTA controllers. We quantify the impact of incorporating active vehicles in the formulation of our RL model for different network structures. HumanLight also enables regulation of the aggressiveness of the HOV prioritization. The impact of parameter setting on the generated phase profile is investigated as a key component of acyclic signal controllers affecting pedestrian waiting times. HumanLight’s scalable, decentralized design can reshape the resolution of traffic management to be more human-centric and empower policies that incentivize ridesharing and public transit systems.

A large-scale traffic signal control algorithm based on multi-layer graph deep reinforcement learning

Due to its capability in handling complex urban intersection environments, deep reinforcement learning (DRL) has been widely applied in Adaptive Traffic Signal Control (ATSC). However, most existing algorithms are designed for specific road networks or traffic conditions, making it difficult to transfer them to new environments. Moreover, current graph-based algorithms do not fully capture the geometric and spatial features of intersections, leading to incomplete embedding of the agent's environment depiction. Additionally, the actions adopted by these algorithms are inherently based on fixed-cycle phases, limiting the flexibility of traffic signal control. To address the aforementioned issues, this paper proposes a Multi-layer Graph Mask Q-Learning (MGMQ) algorithm for multi-intersection ATSC to optimize traffic and reduce delay. Unlike previous graph-based algorithms, this paper introduces a method for computing multi-layer graphs, dividing the traffic environment into upper-level traffic network-layer graphs and lower-level intersection-layer graphs, and employs the graph attention algorithm and an improved GraphSAGE algorithm for computation. This method not only enables the generation of embedded state for intersections that include geometric and spatial features, but also allows the algorithm to adapt to different traffic conditions and road networks. Additionally, we introduce an action masking mechanism, allowing this algorithm can be adapted to different action spaces. As a result, the algorithm uses arbitrary signal phases as actions to achieve flexible traffic flow control, and can be directly applied to intersections with arbitrary geometry. The final test results demonstrate that a model trained solely on synthetic road networks can be directly transferred to other synthetic network configurations or real-world urban road networks, outperforming current state-of-the-art algorithms.

Elevating adaptive traffic signal control in semi‐autonomous traffic dynamics by using connected and automated vehicles as probes

AbstractIn this work, the connected vehicle's messages are used to create an enhanced adaptive traffic signal control (ATSC) system for improved traffic flow. Few existing studies use connected and automated vehicles (CAVs) to develop traffic signal control algorithms under hybrid connected and autonomous conditions. The proposed approach focuses on a four‐phase traffic intersection with both CAVs and human‐driven vehicles (HVs). CAVs share real‐time state information, and a model called Roads Dynamic Segmentation estimates queuing procedures and vehicle fleet numbers on dynamic road sections. This information is used in the Store and Forward Model (SFM) to predict intersection queuing length. The ATSC system, based on model predictive control (MPC), aims to minimize intersection queue length while considering traffic constraints (undersaturated, saturated, and oversaturated) and avoiding free‐flow problems due to queue overflow. To reduce computational complexity, a linear‐quadratic‐regulator (LQR) is used. Real‐world vehicle trajectories and the SUMO tool are used for experimental purposes. Results show that the proposed method reduces average delay by 38.50% and 33.42% compared to fixed timing and traditional MPC in cases of oversaturated traffic flow with 100% CAV penetration. Even with a penetration rate of only 20%, average delay decreases by 13.65% and 6.50%, respectively. This study showcases not only the potential benefits of CAV in enhancing traffic, but also enables the optimal utilization of green duration in signalized intersection control systems. This helps prevent traffic congestion and ensures the efficient and smooth movement of traffic flow.

Enhancing the Robustness of Traffic Signal Control with StageLight: A Multiscale Learning Approach

The continuous evolution of artificial intelligence and cyber–physical systems has presented promising opportunities for optimizing traffic signal control in densely populated urban areas, with the aim of alleviating traffic congestion. One area that has garnered significant interest from both researchers and practitioners is the application of deep reinforcement learning (DRL) in traffic signal control. However, DRL-based algorithms often suffer from instability due to the dynamic nature of traffic flows. Discrepancies between the environments used for training and those encountered during deployment often lead to operational failures. Moreover, conventional DRL-based traffic signal control algorithms tend to reveal vulnerabilities when faced with unforeseen events, such as sensor failure. These challenges highlight the need for innovative solutions to enhance the robustness and adaptability of such systems. To address these pertinent issues, this paper introduces StageLight, a novel two-stage multiscale learning approach, which involves learning optimal timings on a coarse time scale in stage 1, while finetuning them on a finer time scale in stage 2. Our experimental results demonstrate StageLight’s remarkable capability to generalize across diverse traffic conditions and its robustness to various sensor-failure scenarios.

Traffic Signal Control With Adaptive Online-Learning Scheme Using Multiple-Model Neural Networks.

This article proposes a new traffic signal control algorithm to deal with unknown-traffic-system uncertainties and reduce delays in vehicle travel time. Unknown-traffic-system dynamics are approximated using a recurrent neural network (NN). To accurately identify the traffic system model, an online-learning scheme is developed to switch among a set of candidate NNs (i.e., multiple-model NNs) based on their estimation errors. Then, a bank of optimal signal-timing controllers is designed based on the online identification of the traffic system. Simulation studies have been carried out for the obtained control strategies using multiple-model NNs, and the desired results have been obtained. Moreover, compared with the widely used actuated traffic signal control schemes, it is shown that the proposed method can reduce vehicle travel delays and improve traffic system robustness.

Dynamic Route Guidance in Vehicle Networks by Simulating Future Traffic Patterns

Roadway congestion leads to wasted time and money and environmental damage. Since adding more roadway capacity is often not possible in urban environments, it is becoming more important to use existing road networks more efficiently. Toward this goal, recent research in real-time, schedule-driven intersection control has shown an ability to significantly reduce the delays incurred at signalized intersections. Such approaches operate by building a predictive model of when locally sensed approaching traffic is expected to arrive at a given intersection, and then using the model to generate a signal timing plan (a phase schedule) that minimizes the cumulative delay of this traffic as it moves through the intersection. In this paper, we consider whether further reduction in delay could be gained by applying this predictive model to dynamically reroute some portion of vehicles willing to share their destinations along less congested paths. We developed an algorithm that simulates the current traffic state forward at each vehicle decision point, based on knowledge of other vehicles’ current routes and traffic signals’ control algorithms, and evaluated it using the SUMO microscopic simulator on different road networks (one as a simple synthetic example and the other taken from the real world) using different traffic signal control algorithms (fixed-timing plans and schedule-driven intersection control). Experiments carried out on combinations of networks and traffic signal control algorithms show that our rerouting protocol reduces delay for both vehicles participating in route guidance (adopters) and those that do not (non-adopters) and that the reduction in delay generally increases as the proportion of adopters does.

Optimal Traffic Signal Control Using Priority Metric Based on Real-Time Measured Traffic Information

Optimizing traffic control systems at traffic intersections can reduce network-wide fuel consumption as well as improve traffic flow. While traffic signals have conventionally been controlled based on predetermined schedules, various adaptive control systems have been developed recently using advanced sensors such as cameras, radars, and LiDARs. By utilizing rich traffic information enabled by the advanced sensors, more efficient or optimal traffic signal control is possible in response to varying traffic conditions. This paper proposes an optimal traffic signal control method to minimize network-wide fuel consumption utilizing real-time traffic information provided by advanced sensors. This new method employs a priority metric calculated by a weighted sum of various factors, including the total number of vehicles, total vehicle speed, vehicle waiting time, and road preference. Genetic Algorithm (GA) is used as a global optimization method to determine the optimal weights in the priority metric. In order to evaluate the effectiveness of the proposed method, a traffic simulation model is developed in a high-fidelity traffic simulation environment called SUMO, based on a real-world traffic network. The traffic flow within this model is simulated using actual measured traffic data from the traffic network, enabling a comprehensive assessment of the novel optimal traffic signal control method in realistic conditions. The simulation results show that the proposed priority metric-based real-time traffic signal control algorithm can significantly reduce network-wide fuel consumption compared to the conventional fixed-time control and coordinated actuated control methods that are currently used in the modeled network. Additionally, incorporating truck priority in the priority metric leads to further improvements in fuel consumption reduction.

Cooperative Control for Signalized Intersections in Intelligent Connected Vehicle Environments

Cooperative control of vehicle trajectories and traffic signal phases is a promising approach to improving the efficiency and safety of transportation systems. This type of traffic flow control refers to the coordination and optimization of vehicle trajectories and traffic signal phases to reduce congestion, travel time, and fuel consumption. In this paper, we propose a cooperative control method that combines a model predictive control algorithm for adaptive traffic signal control and a trajectory construction algorithm. For traffic signal phase selection, the proposed modification of the adaptive traffic signal control algorithm combines the travel time obtained using either the vehicle trajectory or a deep neural network model and stop delays. The vehicle trajectory construction algorithm takes into account the predicted traffic signal phase to achieve cooperative control. To evaluate the method performance, numerical experiments have been conducted for three real-world scenarios in the SUMO simulation package. The experimental results show that the proposed cooperative control method can reduce the average fuel consumption by 1% to 4.2%, the average travel time by 1% to 5.3%, and the average stop delays to 27% for different simulation scenarios compared to the baseline methods.

Hierarchical graph multi-agent reinforcement learning for traffic signal control

Multi-agent reinforcement learning (MARL) is a promising algorithm for traffic signal control (TSC), and graph neural networks make a further improvement on its learning capacity. However, these state-of-the-art algorithms adopt fine-granularity information (i.e., current step-states) to get traffic-network embeddings, but ignore great-granularity information (e.g., previous multiple step-states); In addition, these algorithms are optimized by loss functions in the viewpoint of MARL, but ignore the correlation between input information and output embeddings. This paper proposes a Hierarchical Graph Multi-agent Mutual Information (HG-M2I) algorithm for TSC. Specifically, HG-M2I algorithm is developed based on: 1) Multi-granularity fusion employs a proposed Hierarchical Graph representation learning (HG) algorithm, which fuses both current step-states of multiple agents and previous multiple step-states of each agent, thus facilitates to produce optimal final embeddings; 2) Joint optimization employs a proposed Multi-agent Mutual Information (M2I) framework, which measures the correlation between input step-states and output embeddings by maximizing mutual information, the corresponding mutual-information and MARL loss jointly optimize the whole algorithm, thus facilitates to derive optimal traffic-signal policies. HG-M2I is compared against these state-of-the-art algorithms on synthetic-road and real-road datasets. Experimental results not only show the superior performance of HG-M2I over other compared algorithms, but also illustrate its advantageous transferability.

Cooperative Control of Traffic Signals and Vehicle Trajectories

The transportation system is one of the most important parts of the country's economy. At the same time, the growth in road traffic has a significant negative impact on the economic performance of the industry. One of the ways to increase the efficiency of using the transportation infrastructure is to manage traffic flows, incl. by controlling traffic signals at signalized intersections. One of the trends in the development of intelligent transportation systems is the creation of vehicular ad hoc networks that allow the exchange of information between vehicles and infrastructure, as well as the development of autonomous vehicles. As a result, it becomes possible to formulate the problem of cooperative control of vehicle trajectories and traffic signals to increase the capacity of intersections and reduce fuel consumption and travel time. This paper presents a method for managing traffic flow at an intersection, which consists of the cooperative control of traffic signals and trajectories of connected/autonomous vehicles. The developed method combines an algorithm for the adaptive control of traffic signals based on a deterministic model for predicting the movement of vehicles and a two-stage algorithm for constructing the trajectory of vehicles. The objective optimization function used to construct the optimal trajectories takes into account fuel consumption, travel time on the road lane, and waiting time at the intersection. Experimental studies of the developed method were carried out in the microscopic traffic simulation package SUMO using three simulation scenarios, including two synthetic scenarios and a scenario in a real urban environment. The results of experimental studies confirm the effectiveness of the developed method in terms of fuel consumption, travel time, and waiting time in comparison with the adaptive traffic signal control algorithm.

Traffic signal control in mixed traffic environment based on advance decision and reinforcement learning

Abstract Reinforcement learning-based traffic signal control systems (RLTSC) can enhance dynamic adaptability, save vehicle travelling time and promote intersection capacity. However, the existing RLTSC methods do not consider the driver's response time requirement, so the systems often face efficiency limitations and implementation difficulties. We propose the advance decision-making reinforcement learning traffic signal control (AD-RLTSC) algorithm to improve traffic efficiency while ensuring safety in mixed traffic environment. First, the relationship between the intersection perception range and the signal control period is established and the trust region state (TRS) is proposed. Then, the scalable state matrix is dynamically adjusted to decide the future signal light status. The decision will be displayed to the human-driven vehicles (HDVs) through the bi-countdown timer mechanism and sent to the nearby connected automated vehicles (CAVs) using the wireless network rather than be executed immediately. HDVs and CAVs optimize the driving speed based on the remaining green (or red) time. Besides, the Double Dueling Deep Q-learning Network algorithm is used for reinforcement learning training; a standardized reward is proposed to enhance the performance of intersection control and prioritized experience replay is adopted to improve sample utilization. The experimental results on vehicle micro-behaviour and traffic macro-efficiency showed that the proposed AD-RLTSC algorithm can simultaneously improve both traffic efficiency and traffic flow stability.

A meta–reinforcement learning algorithm for traffic signal control to automatically switch different reward functions according to the saturation level of traffic flows

AbstractReinforcement learning (RL) algorithms have been widely applied in solving traffic signal control problems. Traffic environments, however, are intrinsically nonstationary, which creates a convergence problem that RL algorithms struggle to overcome. Basically, as a target problem for an RL algorithm, the Markov decision process (MDP) can be solved only when both the transition and reward functions do not vary. Unfortunately, the environment for traffic signal control is not stationary since the goal of traffic signal control varies according to congestion levels. For unsaturated traffic conditions, the objective of traffic signal control should be to minimize vehicle delay. On the other hand, the objective must be to maximize the throughput when traffic flow is saturated. A multiregime analysis is possible for varying conditions, but classifying the traffic regime creates another complex task. The present study provides a meta‐RL algorithm that embeds a latent vector to recognize the different contexts of an environment in order to automatically classify traffic regimes and apply a customized reward for each context. In simulation experiments, the proposed meta‐RL algorithm succeeded in differentiating rewards according to the saturation level of traffic conditions.

An inductive heterogeneous graph attention-based multi-agent deep graph infomax algorithm for adaptive traffic signal control

Adaptive traffic signal control (ATSC) facilitates alleviating traffic congestion. Multi-agent deep reinforcement learning (MDRL) is a new promising algorithm for ATSC, and Graph Neural Networks (GNNs) further promote its learning ability. However, there are some drawbacks in the state-of-the-art MDRL algorithms. (1) These algorithms cannot effectively fuse diverse heterogeneous information of traffic networks due to adopting homogeneous GNNs; (2) These algorithms cannot be effectively trained due to merely adopting MDRL loss functions. In this paper, we propose an Inductive Heterogeneous graph Attention-based Multi-agent Deep Graph Infomax (IHA-MDGI) algorithm for ATSC. The proposed IHA-MDGI algorithm conducts both feature fusion via a proposed Inductive Heterogeneous graph Attention (IHA) algorithm and training via a proposed Multi-agent Deep Graph Infomax (MDGI) framework. Specifically, (1) Unlike the algorithms which adopt homogeneous GNNs, in the IHA algorithm, heterogeneous GNNs are designed to fuse both heterogeneous structural information and heterogeneous features of traffic networks, which aims to acquire heterogeneous information embeddings of traffic networks. (2) In the MDGI framework, the acquired embeddings are used to calculate the signal-control policies and Q-value for each agent, and then a mutual-information loss function is designed, which combines with the MDRL loss function to jointly train the whole algorithm. The designed mutual-information loss function focuses on maximizing mutual information between input (i.e., heterogeneous information embeddings) and output (i.e., Q-value), which can produce cooperative signal-control policies and maximize Q-value. We conduct the experiments in both real-traffic and synthetic-traffic networks under the time-varying traffic flows, and the results demonstrate that IHA-MDGI algorithm outperforms the state-of-the-art MDRL algorithms about multiple metrics.

Field Assessment of Intersection Performance Enhanced by Traffic Signal Optimization and Vehicle Trajectory Planning

The development of Connected Automated Vehicle (CAV) technology introduces vehicle connectivity and automation into urban intersection management. It offers powerful means for accurate traffic state perception and effective traffic control actuation. This enabled the development of an intersection control algorithm that included an optimal traffic signal control algorithm and a trajectory planning function. The intersection controller aimed to maximize the intersection throughput while improving the vehicle energy efficiency via implementing adaptive signal phasing and time plans and sending reference trajectories to CAVs. Its effectiveness was tested on a closed test track equipped with a real-time traffic simulation platform, a traffic signal controller, and three physical test vehicles. The test results suggest that the intersection control algorithm was able to improve the average speed of the test vehicles by 9%, although the optimal signal controller or the trajectory planning algorithm alone could only provide marginal speed benefits. This demonstrated the advantage of combining multiple advanced traffic management functions for obtaining an elevated performance increase. For the energy efficiency analysis, both traditional gasoline-engine and hybrid vehicles were used. The hybrid test vehicles obtained fuel savings mostly via the optimal traffic signal controller (e.g., 17% fuel consumption reduction). On the other hand, the gasoline-engine test vehicle’s fuel savings could be largely attributed to the trajectory planning (e.g., 21% fuel consumption reduction). Overall, the proposed intersection controller demonstrated significant vehicle mobility and energy efficiency improvements for vehicles with different powertrains in a nearly realistic traffic condition.

A Robust Adaptive Traffic Signal Control Algorithm Using Q-Learning under Mixed Traffic Flow

The operational and safety performance of intersections is the key to ensuring the efficient operation of urban traffic. With the development of automated driving technologies, the ability of adaptive traffic signal control has been improved according to data detected by connected and automated vehicles (CAVs). In this paper, an adaptive traffic signal control was proposed to optimize the operational and safety performance of the intersection. The proposed algorithm based on Q-learning considers the data detected by loop detectors and CAVs. Furthermore, a comprehensive analysis was conducted to verify the performance of the proposed algorithm. The results show that the average delay and conflict rate have been significantly optimized compared with fixed timing and traffic actuated control. In addition, the performance of the proposed algorithm is good in the test of the irregular intersection. The algorithm provides a new idea for the intelligent management of isolated intersections under the condition of mixed traffic flow. It provides a research basis for the collaborative control of multiple intersections.

Deep Q-learning Approach based on CNN and XGBoost for Traffic Signal Control

Traffic signal control is a way for reducing traffic jams in urban areas, and to optimize the flow of vehicles by minimizing the total waiting times. Several intelligent methods have been proposed to control the traffic signal. However, these methods use a less efficient road features vector, which can lead to suboptimal controls. The objective of this paper is to propose a deep reinforcement learning approach as the hybrid model that combines the convolutional neural network with eXtreme Gradient Boosting to traffic light optimization. We first introduce the deep convolutional neural network architecture for the best features extraction from all available traffic data and then integrated the extracted features into the eXtreme Gradient Boosting model to improve the prediction accuracy. In our approach; cross-validation grid search was used for the hyper-parameters tuning process during the training of the eXtreme Gradient Boosting model, which will attempt to optimize the traffic signal control. Our system is coupled to a microscopic agent-based simulator (Simulation of Urban MObility). Simulation results show that the proposed approach improves significantly the average waiting time when compared to other well-known traffic signal control algorithms.

Deep Q learning-based traffic signal control algorithms: Model development and evaluation with field data

To contend traffic congestion on urban networks, existing studies have made great efforts to develop traffic-responsive signal timing algorithms in the last decade. More recently, as an alternative to conventional model-based algorithms, machine learning-based methods have been tested on traffic light timing problems and show promising potentials. However, many researchers and practitioners still questioned the feasibility and applicability of adopting machine learning techniques in the ATSC domain. One of the reasons is that these methods assumed flawless detectors and heavily relied on simulators for training and evaluations. To address such a critical concern, this article customizes a Deep Q-learning Learning (DQL) method to optimize traffic signal timings at urban intersections, where the partial observations from identity-based detectors are inputs, and the green splits are outputs. A simulation-free data-driven prediction model is also developed to train the DQL with reduced computational time. Then the machine learning-based methods are evaluated on a real-world case with Automatic Number-Plate Recognition (ANPR) data. Experiments show the proposed data-driven model can predict the traffic state in limited computational time, and the DQL algorithm is 3.9% better than the field experiment performance from the adaptive control system, SCOOT, and 22% better than the time-of-day plan by SYNCHRO. The results indicate the DQL methods can only yield marginal improvement with restrictive input and output settings in congested traffic flow in comparison to the conventional adaptive method.

Real-Time Crash-Risk Optimization at Signalized Intersections

Over the past few decades, numerous adaptive traffic signal control (ATSC) algorithms have been proposed to alleviate traffic congestion and optimize traffic mobility using real-time traffic data, such as data from connected vehicles (CVs). However, most of the existing ATSC algorithms do not consider optimizing traffic safety, likely because of the lack of tools to evaluate safety in real time. In this paper, we propose a novel ATSC algorithm for real-time safety optimization. The algorithm utilizes a traditional Reinforcement Learning approach (i.e., Q-learning) as well as recently developed extreme value theory (EVT) real-time crash prediction models. The algorithm was validated using real-world traffic video data collected from two signalized intersections in British Columbia. The results indicated that, compared with an existing fully actuated signal controller, the developed algorithm can significantly reduce the real-time crash risk by 43% to 45% at the intersection’s approaches even at low CVs market penetration rates.

Adaptive Traffic Management System using CNN (YOLO)

The huge number of vehicles on the roadways is making congestion a significant problem. The line longitudinal vehicle waiting to be processed at the crossroads increases quickly, and the traditionally used traffic signals are not able to program it properly. Manual traffic monitoring may be an onerous job since a number of cameras are deployed over the network in traffic management centers. The proactive decision-making of human operators, which would decrease the effect of events and recurring road congestion, might contribute to the easing of the strain of automation.The traffic control frameworks in India are now needed as it is an open-loop control framework, without any input or detection mechanism. Inductive loops and sensors employed in existing technology used to detect the number of passing vehicles. The way traffic lights are adapted is highly inefficient and costly in this existing technology. The aim was to build a traffic control framework by introducing a system for detection ,which gives an input to the existing system (closed loop control system) in order to adapt to the changing traffic density patterns and to provide the controller with a crucial indication for ongoing activities. By this technique, the improvement of the signals on street is extended and thus saves time by preventing traffic congestion. This study proposes an algorithm for real-time traffic signal control, depending on the traffic flow. In reality, the features of competitive traffic flow at the signposted road crossing are used by computer vision and by machine learning. This is done by the latest, real-time object identification, based on convolutional Neural Networks network called You Look Once (YOLO). Traffic signal phases are then improved by data acquired in order to allow more vehicles to pass safely over minimal wait times, particularly the line long and the time of waiting per vehicle.This adjustable traffic signal timer is used to calculate traffic density utilizing YOLO object identification using live pictures of cameras in intervals and adjusts the signal timers appropriately, therefore decreasing the road traffic congestion, ensuring speedier transit for persons, and reducing fuel consumption. The traffic conditions will improve enormously at a relatively modest cost. Inductive loops are a viable but costly approach. This method thereby cuts expenses and outcomes quickly.

IoT-based traffic prediction and traffic signal control system for smart city

Because of the population increasing so high, and traffic density remaining the same, traffic prediction has become a great challenge today. Creating a higher degree of communication in automobiles results in the time wastage, fuel wastage, environmental damage, and even death caused by citizens being trapped in the middle of traffic. Only a few researchers work in traffic congestion prediction and control systems, but it may provide less accuracy. So, this paper proposed an efficient IoT-based traffic prediction using OWENN algorithm and traffic signal control system using Intel 80,286 microprocessor for a smart city. The proposed system consists of ‘5’ phases, namely IoT data collection, feature extraction, classification, optimized traffic IoT values, and traffic signal control system. Initially, the IoT traffic data are collected from the dataset. After that, traffic, weather, and direction information are extracted, and these extracted features are given as input to the OWENN classifier, which classifies which place has more traffic. Suppose one direction of the place has more traffic, it optimizes the IoT values by using IBSO, and finally, the traffic is controlled by using Intel 80,286 microprocessor. An efficient OWENN algorithm for traffic prediction and traffic signal control using a Intel 80,286 microprocessor for a smart city. After extracting the features, the classification is performed in this step. Hereabout, the classification is done by using the optimized weight Elman neural network (OWENN) algorithm that classifies which places have more traffic. OWENN attains 98.23% accuracy than existing model also its achieved 96.69% F-score than existing model. The experimental results show that the proposed system outperforms state-of-the-art methods.