Traditional Preparation Methods Research Articles

Electrocatalysts for the Formation of Hydrogen Peroxide by Oxygen Reduction Reaction.

Hydrogen peroxide (H2O2) is a widely used strong oxidant, and its traditional preparation methods, anthraquinone method, and direct synthesis method, have many drawbacks. The method of producing H2O2 by two-electron oxygen reduction reaction (2e- ORR) is considered an alternative strategy for the traditional anthraquinone method due to its high efficiency, energy saving, and environmental friendliness, but it remains a big challenge. In this review, we have described the mechanism of ORR and the principle of electrocatalytic performance testing, and have summarized the standard performance evaluation techniques for electrocatalysts to produce H2O2. Secondly, according to the theoretical calculation and experimental results, several kinds of efficient electrocatalysts are introduced. It is concluded that noble metal-based materials, carbon-based materials, non-noble metal composites, and single-atom catalysts are the preferred catalyst materials for the preparation of H2O2 by 2e- ORR. Finally, the advantages and novelty of 2e- ORR compared with traditional methods for H2O2 production, as well as the advantages and disadvantages of the above-mentioned high-efficiency catalysts, are summarized. The application prospect and development direction of high-efficiency catalysts for H2O2 production by 2e- ORR has been prospected, which is of great significance for promoting the electrochemical yield of H2O2 and developing green chemical production.

A novel micromixer based on coastal fractal for manufacturing controllable size liposome

The traditional lipid preparation methods are complex, time-consuming, and consume a large amount of reagents, increasing costs and difficulties. Although microfluidic technology is considered a promising solution, achieving controllable liposome production with a simple and inexpensive microfluidic mixing device remains an important problem. This paper presents a wall-type micro-mixer based on coastal zone fractals. Four parameters related to the geometric shape of the coastline fractal in the microchannel are used as design variables, and the mixing index is the objective function. Single-objective optimization numerical analysis of the primary wall-type fractal baffle micromixer under four Reynolds numbers conditions yields the optimal structural configuration. Visualization experiments verify the correctness and accuracy of the numerical simulation, and the optimized mixer is used to produce liposomes. The results show that the micro-mixer with the optimal double-sidewall cross arrangement enhances chaotic convection and improves mixing efficiency. At Re = 0.1 and Re = 100, the mixing efficiency reaches 99%, 50.44% higher than the reference design. By changing the relative flow rates of lipid and aqueous solutions, microfluidic blank liposomes with a particle size of 165.12 ± 11.6 nm and a polydispersity index of 0.35± are obtained. This wall-type fractal micro-mixer has broad application prospects due to its high mixing efficiency.

A Brief Review of Hemp Fiber Length Measurement Techniques

Accurate fiber length measurement is essential for the processing and quality management of textile products. This article reviews the current methods used to measure fiber length, including manual, photoelectric, capacitive, and optical techniques. Existing sample preparation processes for natural fiber characterization have been primarily developed for cotton and wool fibers. However, hemp fibers present unique challenges due to their greater length variability, high strength, and low elongation, making some traditional sample preparation methods less effective. Image processing offers a promising approach for scalable and precise measurement of hemp fiber length. Nevertheless, current image processing techniques are limited by the inability to effectively handle overlapping fibers, which increases both the time and cost of testing. Continued research into developing more advanced segmentation algorithms could lead to more widely adopted commercial methods for fiber measurement.

Ethnobotanical Documentation of Yerba Mate in Syria

ETHNOPHARMACOLOGICAL RELEVANCE: Yerba Mate (_Ilex paraguariensis_) is a traditional herbal beverage consumed for its stimulating effects and health benefits, with a deep cultural association in Syria following its introduction by migrants from South America in the early 20th century. This study documents the cultural, social, and health-related practices surrounding Yerba Mate in Syria, highlighting its integration into local customs and herbal preparations. OBJECTIVE: To explore and document the traditional uses, social practices, and preparation methods of Yerba Mate among Syrian consumers, and to investigate the health benefits and cultural significance attributed to it. METHODS: An electronic survey was distributed to 430 participants from different regions across Syria, collecting data on Yerba Mate consumption habits, social practices, reasons for use, perceived effects, and traditional preparation methods. Quantitative and qualitative data were analyzed using statistical software. The Relative Frequency of Citation (RFC) index was used to assess the prevalence of herbal additives in Yerba Mate preparations. RESULTS: Yerba Mate is consumed regularly by 89.2% of participants, with health benefits being a key motivator for 60% of users. Syrian traditions enhance Yerba Mate with local and imported herbs, with 68.6% of regular drinkers incorporating herbs like wormwood (_Artemisia herba-alba_) and chamomile (_Matricaria chamomilla_), each offering specific health benefits. The survey revealed high consumption patterns, particularly in group settings (51.6%), and frequent daily use by 50% of participants. CONCLUSION: Yerba Mate has become a deeply rooted part of Syrian culture, with local adaptations that incorporate traditional medicinal herbs. These combinations not only enhance the health benefits of the drink but also reflect a blend of imported traditions with Syrian herbal knowledge. The study highlights Yerba Mate's social significance in Syria and suggests the need for further research into its potential therapeutic uses in traditional medicine. Given the unique Syrian practice of mixing Mate with various herbs, further investigation is needed to assess the differences in effects, flavor, and prevalence among these herbal combinations.

Hot extrusion, tensile deformation behavior and deformation mechanism analysis of a wrought superalloy with a high γ′ phase volume fraction of 64 %

A hundred kilograms of GH4975 extrusion bar, featuring fine equiaxed grains, were successfully fabricated using electron beam smelting layer solidification(EBSL) and hot extrusion techniques. Subsequent analysis focused on the microstructure and tensile properties of the extruded bar. The study also delved into the influence of temperature on tensile deformation behavior and mechanisms of the alloy after standard heat treatment(SHT). The results revealed uniformity in precipitated phase size and morphology across the extruded bar, with grain size being the largest at the center and smallest at the edge. Tensile tests conducted at 20 °C and 650 °C show an obvious work hardening phenomenon, and the deformation mechanism is dominated by APB coupled dislocation pairs shearing. With the increase of deformation temperature, the work-hardening phenomenon gradually weakens, and SFs emerge as the primary deformation mechanism at 750 °C. As the deformation temperature further rises, cross slip, Orowan bypass and dislocation climbing gradually dominate. The fracture mode changes from brittle fracture to ductile and brittle mixed fracture, and ultimately to brittle fracture. Compared with the traditional preparation method, the hundred kilograms of GH4975 extrusion bar prepared by this technology still show better mechanical properties.

Oxidation of Toluene over the Pt-Embedded Mesoporous CeO2 Hollow Nanospheres with Advanced Catalytic Performances.

In this study, the novel Pt-embedded mesoporous CeO2 hollow nanospheres (Pt-MS-CeO2-H) with varying Pt contents (0.5-3.0 wt %) were facilely prepared. The Pt nanoparticles were one-pot embedded within the mesoporous shell of Pt-MS-CeO2-H and assisted with the reduction Ostwald ripening process. The traditional preparation methods often face challenges, such as the uneven distribution or aggregation of nanoparticles, as well as difficulty in maintaining high catalytic activity at low Pt content. Compared with the traditional supported Pt/MS-CeO2 catalyst, the embedding strategy facilitated precise control over the position, distribution, and uniformity of Pt nanoparticles within the CeO2 mesoporous shell. Additionally, the encapsulation process of Pt nanoparticles played a pivotal role in generating oxygen vacancies and activating surface chemical adsorption of oxygen. Resultantly, the toluene oxidation performances of 1Pt-MS-CeO2-H catalyst showed much lower T90 (171 °C) than 1Pt/MS-CeO2 (311 °C). To elucidate the underlying reasons, in situ diffuse reflectance infrared Fourier transform spectroscopy of toluene oxidation was employed to identify the reaction intermediates and pathways over these catalysts. In summary, the Pt-embedded mesoporous CeO2 hollow nanosphere catalysts were considered as potential candidates when designing high-performance toluene catalytic oxidation catalysts.

Co–Ni bimetallic oxide with tuned surface oxygen vacancies efficiently electrocatalytic reduction of nitrate to ammonia

The electrocatalytic reduction reaction of nitrate (NO3−) to ammonia (NH3) provides an efficient and clean NH3 production method, which has the potential to replace the traditional industrial preparation methods. However, the limited activity and Faraday efficiency (FE) of existing catalysts impede the practical application of this technology. Herein, in this work, a high-performance catalyst with high NH3 yield and FE was fabricated. Co–Ni bimetallic oxide (NiCo2O4) catalysts with tuned surface oxygen vacancies (OVs) contents were prepared by changing the heating rate during calcination, NiCo2O4 calcined at a heating rate of 5 °C/min (NiCo2O4-5) possessed the highest surface OVs content. Experimental studies showed that NiCo2O4 with higher surface OVs had better NO3RR activity, inhibited the production of nitrite (NO2−), and exhibited higher selectivity to NH3. Among prepared catalysts, NiCo2O4-5 demonstrated superior performance in electrocatalytic reduction of NO3− to NH3, achieving a high NH3 FE (94.4 %) and yield (193.2 mmol/h g−1) at a suitable applied voltage. Besides, in situ Fourier transform infrared spectroscopy analysis suggested that NiCo2O4-5 preferentially followed the NO3RR pathway as follows: *NO3 → *HNO3 → *NO2 → *HNO2 → *NO → *HNO → *N → *NH → *NH2 → *NH3.

Thiol-functionalized MOF modified 3D printed monolithic microextraction array for analysis of trace Cd and Pb in human urine

Controlling the position, size, and shape of pores is a limitation of traditional monolithic preparation methods. The application of 3D printing technology offers high customizability, allowing the precise printing of pore positions, sizes, and shapes according to the designer's 3D model. Herein, by using Projection Microstereolithography (PμSL), we prepared a 3D-printed monolithic array with post-modification of thiol-functionalized metal-organic framework (MOF), and combined it with inductively coupled plasma mass spectrometry (ICP-MS) for the online analysis of trace Cd and Pb in human urine. To achieve array monolithic microextraction, six 3D-printed monolithic columns were modified with thiol-functionalized MOF-808 (MOF-808-SH), and were then assembled in the 3D printed extraction device incorporating gas valve and scaffold. The MOF-808-SH modified 3D-printed monolithic column exhibits excellent extraction performance to Cd2+ and Pb2+ due to rich active adsorption sites and hierarchical porous structure, and has long life span (>100 reused times). Under the optimized conditions, the limits of detection (LODs) are 3.5 and 17.6 ng L−1 for Cd2+ and Pb2+, respectively, with the relative standard deviations of 4.9 % and 8.2 % (0.1 μg L−1, n = 7), and the sample throughput is 11 h−1. To validate the accuracy of the method, the method was used to determine Cd and Pb in Certified Reference Materials of freeze-dried human urine, the determined results agree well with the certified values. This method was also successfully applied to the determination of trace Cd and Pb in real human urine samples. The developed method offers low LODs, robust anti-interference capability, high sample throughput, long reuse cycles, and automation analysis, showing great potential for the analysis of trace heavy metals in biological samples.

Precisely Tunable Instantaneous Carbon Rearrangement Enables Low-Working-Potential Hard Carbon Toward Sodium-Ion Batteries with Enhanced Energy Density.

As the preferred anode material for sodium-ion batteries, hard carbon (HC) confronts significant obstacles in providing a long and dominant low-voltage plateau to boost the output energy density of full batteries. The critical challenge lies in precisely enhancing the local graphitization degree to minimize Na+ ad-/chemisorption, while effectively controlling the growth of internal closed nanopores to maximize Na+ filling. Unfortunately, traditional high-temperature preparation methods struggle to achieve both objectives simultaneously. Herein, a transient sintering-involved kinetically-controlled synthesis strategy is proposed that enables the creation of metastable HCs with precisely tunable carbon phases and low discharge/charge voltage plateaus. By optimizing the temperature and width of thermal pulses, the high-throughput screened HCs are characterized by short-range ordered graphitic micro-domains that possess accurate crystallite width and height, as well as appropriately-sized closed nanopores. This advancement realizes HC anodes with significantly prolonged low-voltage plateaus below 0.1V, with the best sample exhibiting a high plateau capacity of up to 325mAhg-1. The energy density of the HC||Na3V2(PO4)3 full battery can therefore be increased by 20.7%. Machine learning study explicitly unveils the "carbon phase evolution-electrochemistry" relationship. This work promises disruptive changes to the synthesis, optimization, and commercialization of HC anodes for high-energy-density sodium-ion batteries.

Ethnomedicine Study of Medicinal Plants for Therapy of Elderly Sleep Disorders in Tengger Tribe

Ethnomedicine offers valuable insights into plant-based therapies, potentially leading to the discovery of novel drugs. Sleep disturbances, including difficulty falling asleep, maintaining sleep, and early morning awakening, are prevalent among the elderly population and can significantly worsen Alzheimer's disease progression. This study explores the medicinal plants utilized by the Tengger tribe's elderly population for treating sleep disorders. Employing a mixed-methods approach, the study involved qualitative data collection through snowball sampling and in-depth interviews with 99 elderly participants and three traditional healers of the Tengger tribe. Quantitative data was obtained through questionnaires administered during field surveys. Participants were selected based on specific criteria: elderly individuals over 60 years of age, native Tengger tribe members with a history of using medicinal plants for sleep disorders; traditional healers were required to be native Tengger tribe members with knowledge passed down through generations. The study identified a total of 11 medicinal plants used for sleep disorders. Five plant species emerged as the most dominant based on the highest citation value (FC) analysis: kale (Ipomoea reptans), agarwood (Aquilaria malaccensis), sintok (Cinnamomum sintoc), Broadleaf plantain (Plantago major), and soursop (Annona muricata). The most commonly used plant parts were leaves, bark, and roots. Traditional preparation methods included boiling and burning the plant materials. Notably, knowledge of these medicinal plants is primarily transmitted orally within the community. Our findings highlight five medicinal plants employed by the Tengger elderly to manage sleep disorders, with limited documented evidence of their efficacy.

Advanced technology based on Poly(deep eutectic solvent) core–shell nanomaterials enriched with Fructus Choerospondias phenols for efficient defense against UVB-induced ferroptosis

Plant phenolic compounds serve as significant natural antioxidants. However, traditional preparation methods face sustainability challenges. In this study, we synthesized a novel deep eutectic solvent (DES) modified core–shell nanomaterial composed of betaine, ethylene glycol and dopamine hydrochloride based on the spatial arrangement formed by the abundant weak interaction forces in the poly(deep eutectic solvent) (PDES). Utilizing the PDES magnetic nanomaterial and combined with ultrasound-assisted matrix solid phase dispersion (UA-MSPD), it was able to efficiently enrich Fructus Choerospondias phenols (FCP) up to 61.468 ± 0.405 mg/g. Density functional theory (DFT) was used to analyze the adsorption mechanism between the material and the target compounds, which involved weak interactions of electrostatics, hydrogen bonds, and π-π stacking, while maintaining the activity of phenols without destroying the molecular structure. Remarkably, the adsorption efficiency of the material remained above 80 % after six repetitions, indicating excellent reusability. FCPs were identified and analyzed using ultra-performance liquid chromatography-tandem triple quadrupole mass spectrometry (UPLC-Q-TOF-MS). The FCP prepared by Fe3O4@SiO2@PDES exhibited superior in vitro antioxidant performance, achieving enrichment and purification in one step. Cell experiment results showed that FCP could scavenge ROS, regulate cytokines, and reduce ferroptosis caused by ultraviolet radiation, making FCP have therapeutic value in practical applications. The technology opens up a new way for the green and sustainable production and enrichment of plant phenolic compounds for anti-aging treatment.

Element-tailored quenching methods: Phase-defective K0.5Mn1-xCrxO2 cathode materials for potassium ion batteries

Potassium-ion batteries (PIBs) are emerging as a promising next-generation energy storage system due to their high economic efficiency and theoretical energy density. Among various cathode materials, K0·5MnO2-based cathode materials have garnered significant attention due to their high energy density and industrial feasibility. In this work, A P3-type K0.5Mn1-xCrxO2 cathode material was synthesized using a target-elements tailoring quenching method. By strategically substituting targeted elements and employing tailored quenching techniques, it can effectively alleviate Jahn-Teller distortion and suppress phase transitions, enhancing the material structural stability. The synthesized K0.5Mn1-xCrxO2 cathode material demonstrated excellent cycling stability of retaining 70 % specific capacity after 300 cycles at a current density of 500 mA g−1. This work breaks out the traditional solid-phase sintering preparation method and provides a new solution for the future preparation of other structurally stable high-performance layered oxides with excellent rate performance for potassium ion batteries.

Aging time improves adhesive performance of handmade starch paste for restoration of ancient Chinese books and its mechanism of action

In the restoration of ancient Chinese books, handmade starch paste serves as a paper adhesive, distinguished from traditional starch paste preparation methods. It involves special processes such as starch washing and aging, relying entirely on the artisanal expertise throughout the entire process. The study recreates the process of making handmade starch paste for the restoration of traditional ancient books and investigates the effects of aging time on the apparent viscosity, rheological properties, and adhesive performance of the paste. The results indicate that during aging, the pH of the starch paste decreases significantly, but it has a minimal impact on its apparent viscosity, rheological properties, and paper softness. However, it notably enhances the adhesive performance, with the optimal results observed after 3 days of aging. This is attributed to the decrease in residual protein content in the starch, as well as the significant improvement in swelling power and solubility of the starch. The results of infrared spectroscopy and XRD testing reveal that there are no significant changes in the molecular and crystalline structures of starch during the aging process. The acidic environment produced by starch fermentation promotes protein hydrolysis, emerging as the primary reason for the improved adhesive performance of the paste.

Bilayer-favored intercalation induced low-voltage electrochemical production of nano-graphene oxide in neutral phosphate

Graphene oxide (GO) exhibits great potential in various fields such as catalysis, wastewater treatment, and energy storage. However, traditional top-down GO preparation methods based on graphite exfoliation often suffer from high energy consumption and inevitably environmental pollution. In this work, an environmentally benign and low-voltage electrochemical exfoliation approach to fabricate nanoscale GO employing carbon fiber-based materials as the precursor using phosphate was proposed. Under neutral phosphate electrolyte, bilayer graphene oxide with a lateral size of ∼500 nm, thickness of ∼1.5 nm, and C/O ratio of 2.96 could be obtained via a constant potential process. By adjusting the pH to 12 to intensify the exfoliation reaction, the lateral size of the graphene oxide was controllable, decreasing to ∼50 nm, while the C/O ratio decreased to 0.9. Due to the further decrease in C/O ratio, the thickness increased slightly to 2–3 nm. The exfoliation potential (1.6–2.5 V vs. Ag/AgCl) and electrolyte concentration (50–500 mM) had an obvious impact on the yield of graphene oxide. Through electrochemical analysis such as linear sweep voltammetry, as well as density functional theory calculations, the exfoliation mechanism of phosphate is elucidated in detail, demonstrating that the stepwise ionized phosphate anions possess more robust intercalation capability than sulfate, thus enabling efficient exfoliation to the intertwined nanocrystalline graphite structure of carbon fibers. The DFT results revealed the bilayer-favored intercalation of phosphate, which accords well with experiments. This work provides a new controllable and green approach for GO synthesis, demonstrated by life cycle assessment. It could assist subsequent studies exploring the size effects of GO and its applications in environmental remediation and energy storage.

Advanced Preparation Methods for Ceramic Membrane Materials in Electrochemical Applications

The outstanding thermal, chemical, and mechanical properties of ceramic membranes have attracted increasing attention, offering advantages over polymer and metal counterparts. Exploring the specialized applications of ceramic membranes through various preparation methods poses a daunting challenge for contemporary researchers. Traditional preparation methods are essentially unable to meet the requirements of complex membrane structures. For instance, in ceramic fuel cell applications, cells composed of ceramic membrane materials exhibit high resistance and low conductivity, which seriously hinders the progress of new high-performance ceramic fuel cells. Therefore, it is necessary to improve preparation methods to improve the electrochemical performance of devices composed of ceramic membrane materials. In recent years, breakthroughs in various new processing technologies have propelled the performance of ceramic membrane devices. This paper will focus on the following aspects. Firstly, traditional preparation methods and advanced preparation methods of ceramic membrane materials will be discussed. Secondly, high-performance ceramic membrane materials prepared by different advanced preparation methods are introduced, and the electrochemical properties of the devices composed of ceramic membrane materials are elaborated in combination with different testing and characterization methods. Finally, the prospects and future direction of the preparation of ceramic membrane materials by advanced preparation methods are summarized.

Sulfur-modified polyurethane adhesives: Green synthesis process and disassembly-responsive characteristics

Polyurethane adhesives have been widely used in industrial production and daily life for their excellent properties. With the urgent need for social progress, the intelligent responsiveness of polyurethane adhesives has become more and more important. Here, we demonstrate a stimulus-responsive polyurethane adhesive. Starting from the structural design, sulfur (S8) is added into the polyurethane adhesive for the first time using the inverse vulcanized mechanism, and the controllable disassembly response of the polyurethane adhesive under the condition of thermal stimulation is realized. In addition, the stimulus response of the adhesive can also be activated through the permeation process of methoxide anion (CH3O−), and the rapid disassembly response property is displayed in the methanol solution of CH3ONa, to realize the recovery of the bonding substrate. Simultaneously, the implementation of the inverse vulcanized mechanism imparts the adhesive with a diminished water absorption swelling rate and heightened cross-link density. On the surface of the metal substrate, it shows excellent bonding properties, with a lap shear adhesion strength reaching 2.8 MPa. It is worth noting that the adhesive also exhibits excellent underwater durability. After 36 h of underwater soaking treatment, its adhesion can still be maintained at 2.4 MPa. This work reveals the mechanism of rapid disassembly of polyurethane adhesives at the molecular level. By density functional theory (DFT) calculation, it is found that the minimum bond energy of the S-S bond in a polyurethane adhesive system is 134 KJ·mol−1, and the disassembly response can be triggered by heating to 53.79℃. At the same time, the mechanism of the disassembly response induced by CH3O− is further analyzed using an electrostatic potential (ESP) diagram. This work utilizes sulfur (S8) and castor oil (CO) as raw materials, which can be sourced from industrial or agricultural by-products. It breaks away from traditional polyurethane adhesive preparation methods and offers a "green" strategy that can be synthesized through a solvent-free one-pot process, thus providing a new way of thinking about obtaining sustainable polymers from industrial and agricultural by-products.

Patterned microsphere-lens projection lithography using an electrohydrodynamic-jet-printing-assisted assembly

Microlens arrays have been widely used in the fields of micro-optics and micro- and nanofabrication. Traditional preparation methods utilize commercial photoresists and thermosetting materials, thereby restricting the optical properties of microlenses. In recent years, significant advancements have been achieved in near-field super-resolution imaging by utilizing microspheres and forming arrays of microsphere lenses via self-assembly. However, self-assembly approaches lack flexibility in terms of pattern selection. This study proposes a method that utilizes electrohydrodynamic jet (E-jet) printing to code ultraviolet (UV)-curable adhesives and assist in the assembly of patterned microsphere-lens arrays. Simulation results demonstrate that the UV-curable adhesive has little impact on the optical properties of the microsphere lens. Moreover, the microsphere lens exhibits a superior imaging resolution compared with traditional microlenses. A projection-lithography system is developed to achieve an accurate alignment between the focal plane of the microsphere lenses and the plane of the photoresist, facilitating the fabrication of patterned nanostructures. The lithographic nanostructures have a minimum feature size of 850 nm. This method enables the fabrication of arrays of microsphere lenses with arbitrary patterns and presents an inexpensive and simple strategy for fabricating micro- and nanostructure arrays with submicrometer features.

Developing an Effective Preparation Strategy Model for Competency Tests in Heavy Equipment Engineering at Vocational High Schools

This study aims to develop an effective preparation strategy model for competency tests in Heavy Equipment Engineering at vocational high schools. Recognizing the pivotal role of vocational education in equipping students with industry-relevant skills, the research addresses the challenges students face in preparing for competency assessments. Utilizing a mixed-methods approach, the study integrates quantitative data from surveys and pre/post-tests with qualitative insights from interviews and focus groups. The proposed model encompasses curriculum alignment, innovative teaching methodologies, and effective study techniques, incorporating best practices identified through an extensive literature review. Pilot testing in selected schools provided critical feedback, allowing for refinements to ensure the model's applicability and effectiveness. The evaluation of the model's impact revealed significant improvements in students' test scores and self-reported preparedness, demonstrating the model's potential to enhance competency levels. Comparative analysis highlighted the model's superiority over traditional preparation methods, while qualitative feedback underscored its strengths and areas for further enhancement. The findings contribute to the field of vocational education by offering a structured preparation strategy that can be adopted by schools and policymakers to improve student outcomes. The study's implications extend to educational authorities, providing a framework for policy formulation and implementation. Future research directions include refining the model and exploring its applicability across different vocational disciplines.

A highly sensitive polydentate ligand-based fluorescent probe for imaging of Hg2+ in Arabidopsis thaliana

A novel fluorescent chemosensor (E)-2-((3-((bis(pyridin-2-ylmethyl)amino)methyl)-2-hydroxy-5-methylbenzylidene)amino)-3′, 6′-bis(diethylamino)spiro[isoindoline-1, 9′-xanthen]-3-one (RPA) was synthesized through traditional Schiff base preparation methods and characterized by 1H NMR, 13C NMR and ESI-MS. Sensor RPA showed obvious fluorescence enhancement response to Hg2+ in aqueous solution, and the detection limit was 0.8 μM. The results of Job curve indicated that sensor RPA and Hg2+ ion coordinated with each other with a binding stoichiometry of 1:1, and the optimal pH range was from 4 to 9. The results of paper strip suggested that sensor RPA could been used for effective naked-eye detection of Hg2+ and showed low toxicity and good biocompatibility with Arabidopsis thaliana.

X-Paste improves wound healing in diabetes via NF-E2-related factor/HO-1 signaling pathway

BACKGROUND Diabetic foot ulcers (DFU), as severe complications of diabetes mellitus (DM), significantly compromise patient health and carry risks of amputation and mortality. AIM To offer new insights into the occurrence and development of DFU, focusing on the therapeutic mechanisms of X-Paste (XP) of wound healing in diabetic mice. METHODS Employing traditional Chinese medicine ointment preparation methods, XP combines various medicinal ingredients. High-performance liquid chromatography (HPLC) identified XP’s main components. Using streptozotocin (STZ)-induced diabetic, we aimed to investigate whether XP participated in the process of diabetic wound healing. RNA-sequencing analyzed gene expression differences between XP-treated and control groups. Molecular docking clarified XP’s treatment mechanisms for diabetic wound healing. Human umbilical vein endothelial cells (HUVECs) were used to investigate the effects of Andrographolide (Andro) on cell viability, reactive oxygen species generation, apoptosis, proliferation, and metastasis in vitro following exposure to high glucose (HG), while NF-E2-related factor-2 (Nrf2 ) knockdown elucidated Andro’s molecular mechanisms. RESULTS XP notably enhanced wound healing in mice, expediting the healing process. RNA-sequencing revealed Nrf2 upregulation in DM tissues following XP treatment. HPLC identified 21 primary XP components, with Andro exhibiting strong Nrf2 binding. Andro mitigated HG-induced HUVECs proliferation, metastasis, angiogenic injury, and inflammation inhibition. Andro alleviates HG-induced HUVECs damage through Nrf2 /HO-1 pathway activation, with Nrf2 knockdown reducing Andro’s proliferative and endothelial protective effects. CONCLUSION XP significantly promotes wound healing in STZ-induced diabetic models. As XP’s key component, Andro activates the Nrf2 /HO-1 signaling pathway, enhancing cell proliferation, tubule formation, and inflammation reduction.