Total Rate Research Articles

Survival, cumulative hospital days and infectious complications in urgent-start PD compared with urgent-start HD.

Urgent-start peritoneal dialysis (PD) carries a similar efficacy and safety profile compared to urgent-start haemodialysis (HD) but is only sparsely applied due to resource issues and concerns of complication risks. Furthermore, few data exist on adverse outcomes associated with central venous catheter (CVC) insertions in urgent-start HD patients. Thus, we sought to compare patient and dialysis-related outcomes in patients undergoing urgent-start PD or HD. All patients initiating urgent-start PD in a tertiary research hospital in 2005-2018 were included in this retrospective, single-centre, comparative study and matched with urgent-start HD patients of similar age and chronic kidney disease aetiology. All urgent-start PDs were initiated within 72 h after catheter insertion, and urgent-start HDs were performed via a CVC. All analyses were performed at 3 months and at 1 year of follow-up, respectively. Thirty-three patients who commenced urgent-start PD and 58 matched urgent-start HD control patients were included. Altogether, 26 patients (29%; PD: 36%, HD 24%) died within the 1-year follow-up, and patient survival was similar at 3 months (hazard ratio (HR): 1.15, 95% confidence interval (CI): 0.35-3.81, p = 0.82) and at 1 year of follow-up (HR: 0.64, 95% CI: 0.30-1.39, p = 0.26) between the study groups. There were no differences in the total kidney replacement therapy (KRT)-related infection rate (p = 0.66) or cumulative first-year hospital care days (p = 0.43) between the treatment groups. Altogether, 139 CVCs were inserted during the 1-year follow-up. The number of CVCs per patient was associated with the emergence of blood culture-positive bacteraemia and increased cumulative first-year hospital care days. Patient survival, cumulative first-year hospital care days and total KRT-related infection rate at 3 months and 1-year follow-up are similar between urgent-start PD and urgent-start HD patients. Furthermore, CVC insertion rate is associated with incident blood culture-positive bacteraemia and increased cumulative first-year hospital care days.

Effortless impregnation method for melamine formaldehyde foams exhibiting elevated thermal stability and exceptional flame retardant characteristics

AbstractMelamine‐formaldehyde (MF) foam, while intrinsically flame retardant, necessitates further refinement to meet stringent fire safety standards, particularly in terms of heat release rate and thermal stability. In this study, an innovative approach was adopted wherein an inorganic substance, potassium water glass (WG), was employed to create an encapsulation layer on the surface of the MF foam structure via a straightforward dip‐coating technique. The composite foam underwent a comprehensive analysis of its structure and flame retardant characteristics, using test evaluations such as micro‐scale combustion calorimeter (MCC) testing, cone calorimeter testing (CCT), and thermogravimetric‐Fourier infrared spectrometer (TG‐IR) assessments. It was found that the even coating of WG on the MF foam surface profoundly enhanced the foam's structural integrity. Utilizing the shielding properties of this inorganic layer, the hybrid foam's thermal stability experiences a remarkable augmentation. The peak of heat release rate (pHRR) and the total heat release rate (THR) of the MF foam experienced an impressive reduction of 85.2% and 78.8%, correspondingly. Notably, this advancement is concomitant with a substantial decrease of 39.2% in the total smoke release (TSR) and a notable amelioration in mechanical characteristics. Such developments undeniably broaden their application horizons across diverse domains.

Innovative synthesis of low-carbon cemented backfill materials through synergistic activation of solid wastes: An integrated assessment of economic and environmental impacts

The accumulation of large amounts of steel slag (SS) and oil shale residue (OSR) causes serious pollution due to the lack of effective ways to utilize them. In this study, OSR, SS, and soda residue (SR) were used to synergistically prepare all-solid-waste low-carbon cemented backfill material (ALCCB). No cement and chemical additives were added to this material, and synergistic activation enabled full utilization of the solid wastes. The total solid waste utilization rate was 100 %. The mechanical characteristics of the ALCCB and the heavy metal leaching rates were determined. The unconfined compression strength of the ALCCB after 28 days was 5.97 MPa, while the slump was 205 mm. These results met the performance requirements for a filling material. The leaching rates for the heavy metals after 28 days conformed to the guidelines for Class III groundwater quality. The mechanism underlying synergistic hydration of the solid wastes was analyzed at the micro- and macroscale with X-ray diffraction (XRD), thermogravimetric analysis (TG), scanning electron microscopy (SEM), and mercury intrusion porosimetry (MIP). The results indicated that hydration of the ALCCB occurred continuously during curing, and the faster early hydration reaction stabilized heavy metal curing at 7 d. In addition, ALCCB offers greater economic and environmental advantages than cementitious materials. Notably, the economic and environmental benefits of ALCCB were found to supersede those of cement-based materials, with a cost reduction of 42.6 % and a CO2 emission reduction of 86.9 %. This innovative low-carbon mine backfill material effectively promotes the utilization of solid waste resources and supports sustainable development.

The use of δ13C in CO to determine removal of CH4 by Cl radicals in the atmosphere

Abstract The reaction of CH4 with chlorine (Cl) radicals in the atmosphere is associated with an extraordinarily strong isotopic fractionation, where 12CH4 reacts about 70 ‰ faster with Cl than 13CH4. Therefore, although the Cl-based sink of CH¬4 constitutes only a small contribution to its total removal rate, the uncertainty in this small sink has been identified as one of the two largest uncertainties of isotope-based CH4 source apportionment at the global scale. The uncertainty arises from the fact that Cl levels in the atmosphere are so low that they cannot be detected directly. One very sensitive indirect method to identify and quantify the CH4 + Cl reaction in the atmosphere is the detection of the extremely 13C-depleted reaction product carbon monoxide (CO) from this reaction. This article reviews the concept of this approach, its successful application in the atmosphere, its challenges and opportunities for identifying and quantifying Cl-based removal of CH4 at the regional and global scale and its potential to detect and evaluate possible attempts to enhance CH4 removal from the atmosphere.

A population-based estimation of maternal mortality in Lagos State, Nigeria using the indirect sisterhood method

BackgroundPregnancy and delivery deaths represent a risk to women, particularly those living in low- and middle-income countries (LMICs). This population-based survey was conducted to provide estimates of the maternal mortality ratio (MMR) in Lagos Nigeria.MethodsA community-based, cross-sectional study was conducted in mapped Wards and Enumeration Areas (EA) of all Local Government Areas (LGAs) in Lagos, among 9,986 women of reproductive age (15–49 years) from April to August 2022 using a 2-stage cluster sampling technique. A semi-structured, pre-tested questionnaire adapted from nationally representative surveys was administered using REDCap by trained field assistants for data collection on socio-demographics, reproductive health, fertility, and maternal mortality. Data were analysed using SPSS and MMR was estimated using the indirect sisterhood method. Ethical approval was obtained from the Lagos State University Teaching Hospital Health Research and Ethics Committee.ResultsMost of the respondents (28.7%) were aged 25–29 years. Out of 546 deceased sisters reported, 120 (22%) died from maternal causes. Sisters of the deceased aged 20–24 reported almost half of the deaths (46.7%) as due to maternal causes, while those aged 45–49 reported the highest number of deceased sisters who died from other causes (90.2%). The total fertility rate (TFR) was calculated as 3.807, the Lifetime Risk (LTR) of maternal death was 0.0196 or 1-in-51, and the MMR was 430 per 100,000 [95% CI: 360–510].ConclusionOur findings show that the maternal mortality rate for Lagos remains unacceptable and has not changed significantly over time in actual terms. There is need to develop and intensify community-based intervention strategies, programs for private hospitals, monitor MMR trends, identify and contextually address barriers at all levels of maternal care.

What is driving the global decline of human fertility? Need for a multidisciplinary approach to the underlying mechanisms

An intense period of human population expansion over the past 250 years is about to cease. Total fertility rates are falling dramatically all over the world such that highly industrialized nations, including China and the tiger economies of SE Asia, will see their populations decline significantly in the coming decades. The socioeconomic, geopolitical and environmental ramifications of this change are considerable and invite a multidisciplinary consideration of the underlying mechanisms. In the short-term, socioeconomic factors, particularly urbanization and delayed childbearing are powerful drivers of reduced fertility. In parallel, lifestyle factors such as obesity and the presence of numerous reproductive toxicants in the environment, including air-borne pollutants, nanoplastics and electromagnetic radiation, are seriously compromising reproductive health. In the longer term, it is hypothesized that the reduction in family size that accompanies the demographic transition will decrease selection pressure on high fertility genes leading to a progressive loss of human fecundity. Paradoxically, the uptake of assisted reproductive technologies at scale, may also contribute to such fecundity loss by encouraging the retention of poor fertility genotypes within the population. Since the decline in fertility rate that accompanies the demographic transition appears to be ubiquitous, the public health implications for our species are potentially devastating.

Process arrangement and multi-aspect study of a novel environmentally-friendly multigeneration plant relying on a geothermal-based plant combined with the goswami cycle booted by kalina and desalination cycles

In this study, a novel trigeneration system for cooling, heating, freshwater, and electricity generation, driven by geothermal energy is evaluated from thermodynamics, thermoeconomic, and environmental perspectives. To gain a better understanding of the system's performance, energy and exergy analyses are conducted, and the outcomes are compared with other studies. The proposed structure includes a single-flash geothermal plant, a water desalination unit, the Goswami power and cooling cycle, and the Kalina power cycle. This analysis is conducted using Aspen HYSYS software, and the results demonstrated that the single-flash geothermal plant has the highest irreversibility (48 %), and the major sources of irreversibility among all equipment are the heat exchangers, contributing to 68 % of the total exergy destruction rate. Additionally, it is observed from the thermodynamic analysis results that the energy and exergy efficiencies and the total unit cost of products of the proposed process are 32.28 %, 51.71 %, and 5.66 $/GJ, respectively. According to the results, the production rate of the products is cooling (24.8 m3/h), steam (27.44 m3/h), domestic hot water (209.7 m3/h), fresh water (45.02 m3/h), and electric power (16260 kW). The environmental analysis shows that the new process has zero CO2 emission and can save an annual consumption of petroleum equal to 4325160 L, and when compared to the power plants with natural gas and oil as fuel, CO2 emissions are prevented equal to 5691000 kg/year and 13804740 kg/year, respectively.

What controls the expansion of urban gullies in tropical environments? Lessons learned from contrasting cities in D.R. Congo

Urban gullies (UGs) are a growing concern in many tropical cities of the Global South. Addressing this new geo-hydrological hazard requires good insights into the rates and controlling factors of this process. Therefore, we investigate the expansion rates of a representative sample of UGs in Kinshasa (n = 17) and Bukavu (n = 29), two contrasting cities in D.R. Congo. We reconstruct long-term (10–17 years) expansion rates, making a distinction between headcut retreat and sidewall widening, and analyse the environmental factors potentially explaining these rates. Total expansion rates varying between 12.6 and 863 m2y-1. Most of this expansion happens through sidewall widening. In Kinshasa, which is mainly characterized by sandy soils, contrasts in expansion rates are mainly correlated to the characteristics of the upslope drainage area of the gullies. Especially the road density and a hypothetical runoff index (combining drainage area, land use and soil characteristics) explain a significant part of the observed variation. In Bukavu, such trends are less apparent. This is likely because the clayey nature of the soils provides more resistance against gullying, resulting in overall smaller and less actives UGs. Furthermore, the already low infiltration rates of these soils probably make the relative impact of urbanization on runoff production smaller. Our results also indicate that UGs located in recent landslides have higher gully expansion rates. The mechanisms behind remain poorly understood. Overall, our work opens promising perspectives to model and predict gully expansion rates in urban settings but may also guide efforts aiming to stabilize UGs.

Investigation of emissions from passenger flights Denizli Çardak Airport, Türkiye

AbstractDue to developing aviation sector, number of aircraft in the world is increasing. Along with this development, problems such as the decrease in air quality in and around the airport also arise. In this study, it is tried to calculate pollutant emissions occurring in 2022 during the LTO cycles of Denizli Çardak Airport in Turkey. These calculations are based on the information obtained from ICAO Engine Emission Data Bank and flight information published by the General Directorate of State Airports Authority (GDSAA). As a result of the data obtained, 74.64 ton/year pollutants (NOx-37.148 t/y, CO-35.398 t/y and HC-2.094 t/y) were calculated for 2022 at Denizli Çardak Airport. Of all emissions, NOx accounted for 50%, CO 47% and HC 3%. In the LTO cycle, the most fuel is burned in taxi cycle and pollutant emissions produced in this cycle are greater. With a 2 min reduction in taxi time, there will be an approximate 6.8% reduction in the total emission rate in the LTO cycle. Similarly, with a 4 min reduction in taxi time, there will be a 13.72% reduction in the whole emission rate in the LTO cycle. Unlike other studies, in this study the emission rates of various engines were compared. It has been calculated that the amount of pollutant emissions produced by the new generation Boeing 737 MAX LEAP-1B powered aircraft in LTO cycle is 25% less than the amount of pollutant emissions produced by the Airbus A320 NEO LEAP-1 A powered aircraft. The biggest factor here is that the emission of CO pollutants is less. Considering the emission rates produced by these four different engines (B737-800 CFM56-7B, A320 V2500-A1, B737 MAX LEAP-1B, A320 NEO LEAP-1 A), the Airbus A320 V2500-A1 engine is a more environmentally friendly engine than the other engines.

A functional phosphorus/nitrogen‐containing compound for endowing epoxy resin simultaneously with better fire safety, comparable transparency and improved toughness

AbstractCurrently, the flame retardancy of epoxy resin (EP) was achieved at the expenses of the transparency and/or toughness. In the present work, a phosphorus/nitrogen‐containing compound (FDNP) was synthesized by one‐pot method using 9,10‐dihydro‐9‐oxa‐10‐phospha‐phenanthrene‐10‐oxide, furfural and N‐phenyl‐p‐phenylenediamine as raw materials, and further adopted as a functional agent for epoxy resin. The results demonstrated that the FDNP remarkably improved the fire safety of EP. The incorporation of 4 wt% FDNP enabled EP to pass UL‐94 V‐0 rating test and achieve a limiting oxygen index value of 35.5%; meanwhile, the peak heat release rate, total heat release rate and total smoke release were significantly reduced by 41.3%, 41.6% and 72.5% as compared with the pure EP, respectively. What is more, the EP/4 wt% FDNP composite kept almost the same transparency of the pure EP, simultaneously its impact strength was more than doubled as that of the pure EP. Herein, the improved flame retardancy is contributed to a synergistic biphasic flame retardant effect including the formation of a compact protective carbon layer and the release of both non‐combustible gases and phosphorus‐containing radicals.

Impact of HER2 status on clinicopathological characteristics and pathological complete response to neoadjuvant chemotherapy in triple-negative breast cancer.

HER2-low triple-negative breast cancer (TNBC) accounted for up to 34%-39% of primary TNBC and 22.2%-32% of metastatic TNBC. Our study aims to explore the relationship between HER2 expression and clinicopathological characteristics, analyze the impact of HER2 expression on the pathological complete response (pCR) to neoadjuvant chemotherapy (NAC) in TNBC. This study involved 191 patients with TNBC who underwent operation after NAC from October 2021 to August 2022. Clinicopathological characteristics and the frequency of pCR were compared between HER2-low and HER2-0 TNBC. 42.2% (81/191) patients in our cohort were HER2-low. They exhibited differences in menopausal status, body mass index (BMI), androgen receptor (AR) expression, and histological grade (P < 0.05). Particularly, in HER2-low TNBC, AR was associated with tumor size, lymph node metastase, histological grade, and the incidence of multifocal disease (P < 0.05). The total pCR rate of entire cohor was 39.8%. Tumor size (P = 0.025), AR status (P = 0.033) and histological grade (P = 0.007) were significantly associated with the pCR rate of them, while the HER2 status did not exert a similar association. The multivariate analysis revealed that BMI (P = 0.004) and histological grade (P < 0.001) were associated with pCR of HER2-low TNBC, while tumor size (P = 0.034) and AR (P = 0.034) were associated with pCR of HER2-0 TNBC, respectively. In our cohort, HER2-low TNBC patients exhibits specific clinical characteristics and response features to NAC.

Ligand modulation of active center to promote lead-free Cs2AgInCl6 photocatalytic CO2 reduction

Metal halide perovskites (MHP) are potential candidates for the photocatalytic reduction of CO2 due to their long photogenerated carrier lifetime and charge diffusion length. However, the conventional long-chain ligand impedes the adsorption and activation of CO2 molecules in practical applications. Here, a ligand modulation technology is employed to enhance the photocatalytic CO2 reduction activity of lead-free Cs2AgInCl6 microcrystals (MCs). The Cs2AgInCl6 MCs passivated by Oleic acid (OLA) and Octanoic acid (OCA) are used for photocatalytic CO2 reduction. The results show that the surface defects and electronic properties of Cs2AgInCl6 MCs can be adjusted through ligand modulation. Compared with the OLA-Cs2AgInCl6, the OCA-Cs2AgInCl6 catalyst demonstrated a significant improvement in the catalytic yield of CO and CH4. The CO and CH4 catalytic yields of OCA-Cs2AgInCl6 reached 171.88 and 34.15 µmol g−1 h−1 which were 2.03 and 12.98 times higher than those of OLA- Cs2AgInCl6, and the total electron consumption rate of OCA-Cs2AgInCl6 was 615.2 µmol g−1 h−1 which was 3.25 times higher than that of OLA-Cs2AgInCl6. Furthermore, in situ diffuse reflectance infrared Fourier transform spectra revealed the enhancement of photocatalytic activity in Cs2AgInCl6 MCs induced by ligand modulation. This study illustrates the potential of lead-free Cs2AgInCl6 MCs for efficient photocatalytic CO2 reduction and provides a ligand modulation strategy for the active promotion of MHP photocatalysts.

Five-Year Outcomes from a Prospective Study on the Safety and Efficacy of Phasix-ST Mesh Use at the Hiatus During Paraesophageal Hernia Repair.

Laparoscopic paraesophageal hernia (PEH) repair has a high hernia recurrence rate. The aim of this study was to assess the 5-year hernia recurrence rate after PEH repair using a combination of bioresorbable mesh and advanced surgical techniques to address tension as needed in a prospective group of patients. In 2016 a prospective database was established for 50 patients undergoing primary, elective PEH repair with a new bioresorbable mesh (Phasix-ST). Intra-operatively, tension was addressed with Collis gastroplasty and / or diaphragm relaxing incisions as needed. All 50 patients from the initial study were tracked and asked to return for objective follow-up. Recurrence was considered present for any hernia > 2 cm in size. Objective follow-up was obtained in 27 of the original 50 patients (54%) at a median of 5.25 years after their PEH repair. Prior to the 5-year follow-up, 5 patients had a known recurrent hernia. Objective evaluation at 5 years identified an additional 3 recurrences, for a total recurrence rate of 25% (8/32 patients). The hernia recurrence rate in patients with a Collis gastroplasty was significantly lower compared to those without a Collis (7% vs 54%, p=0.008). Two patients underwent re-operation for hernia recurrence. No patient had a mesh infection or mesh erosion. The combination of Phasix-ST mesh and tension reducing techniques during PEH repair led to a 25% hernia recurrence rate at 5 years. The addition of a Collis gastroplasty led to significantly fewer hernia recurrences and is indicative of the potential for esophageal shortening in many patients with a PEH. The long-term safety and efficacy of Phasix-ST mesh in combination with surgical technique for PEH repair is confirmed.

Two birds with one stone: A “needle-like” structure constructed on multifunctional PET fabric surface for flame retardancy and electromagnetic interference shielding

Here, a facile method is reported to prepare multifunctional PET fabrics with high flame retardancy, hydrophobicity and ideal electromagnetic shielding. PET fabric was firstly modified via polydopamine with mussel-like structure, and then DOPO@ZnO was constructed. A new type of composite PET fabric was prepared by simple, low-cost electroless Ni process and surface PDMS treatment (PpDPNP). The resulting composite fabric was extensively investigated for its stability and applicability in a complicated environment. The conductive interconnection network of modified fabric made it have excellent electrical conductivity and mechanical properties. Even after solution corrosion and washing, the prepared composite fabric could maintain a relatively stable electrical conductivity. The conductivity, tensile and elongation at break of composite fabric were 144.62 S/cm, 78.48 MPa and 167.49 %, respectively. The average electromagnetic interference shielding effectiveness (EMI SE) of PpDPNP reached 58.83 dB with 0.18 mm thickness and electroless Ni only 20 min at X-band, which was mainly due to large dielectric loss and multiple reflections. The modified PET fabric had self-extinguishing performance, and peak heat release rate (PHRR) and total heat release rate (THR) were 60.7 % and 59.8 % lower than pure PET fabric, respectively, indicating that the composite fabric had excellent flame retardancy.

Financial big data management and intelligence based on computer intelligent algorithm

With the acceleration of China’s economic integration process, enterprises have gained greater advantages in the fierce market competition, and gradually formed the trend of grouping and large-scale. However, as the scale of the company increases, the establishment of a branch also causes many problems. For example, in order to obtain more benefits, the business performance of the company can generate false growth, resulting in financial and operational risks. This paper analyzed the current situation and needs of enterprise financial control from two aspects of theory and practice, combined with specific engineering projects, taking ZH Group as an example, according to the actual situation of the enterprise. The article first introduces the basic situation of the enterprise; Then, the financial control strategy was designed, and different modules were designed to achieve financial control; Afterwards, use a reverse neural network to evaluate the effectiveness of financial management and risk warning; Relying on particle swarm optimization algorithm to seek the optimal solution and applying it to financial management and risk warning, in order to improve the level of introspection and risk management in decision-making. Finally, the value of computer intelligence algorithms in financial big data management is evaluated by constructing a financial risk indicator system. Through the analysis of enterprise financial management, the total asset turnover rate of ZH Group decreased by 0.39 times in 5 years. After 5 years of adjustment of the company’s business, the company’s overall operational capabilities still needed to be improved, and the company’s comprehensive business capabilities also still needed to be improved. Therefore, the application of intelligent algorithms for financial control is very necessary.

Laparoscopic repair of duodenal atresia: systematic review and meta-analysis after consistent implementation of the technique in the past decade.

Laparoscopic repair of duodenal atresia (LRDA) remains a technically challenging procedure and its benefits ambiguous. To assess the safety and efficacy of LRDA, we performed a systematic review of techniques and material for LRDA and a meta-analysis comparing outcomes with open repair (OR). Comprehensive search of EMBASSE, PubMed and Cochrane was performed from 2000 to 2023. Studies comparing LRDA with OR were identified and outcomes extracted included operative time, time to enteral feeds, length of hospitalisation, anastomotic leaks and stricture and total complications. χ2 was used to assess associations between complications and conversions rates of different LRDA approaches (laparoscopic technique, suturing technique). Comprehensive meta-analysis was used for Meta-analysis. Twelve studies were identified and 1731 patients were enrolled in the study (398 [LRDA] and 1325 [OR]). Total rate of complications and conversion for LRDA was 15.58% and 18.84%, respectively. Complication rates were not significantly affected by operative technique and suturing technique. Conversion rates were not significantly affected operative technique; using a combination of interrupted and running suturing was significantly higher than using running or interrupted (χ2 = 7.45, p < 0.05). Anastomotic leaks, strictures and total complications were equivocal between LRDA and OR (OR 1.672, 95% CI 0.796-3.514; OR 2.010, 95% CI 0.758-5.333; OR 1.172, 95% CI 0.195-7.03). Operative time was significantly greater for LRDA (SDM 1.035, 95% CI 0.574-1.495, p < 0.001). Time to initial and full enteral feeds and length of hospitalisation were shorter in the LRDA group (SDM -0.493, 95% CI -2.166 to 1.752, p = 0.466; SDM -0.207, 95% CI -1.807 to 0.822, p = 0.019; SDM -0.111, 95% CI -1.101 to 0.880, p = 0.466, respectively). LRDA showed equivalent complication rates compared to OR with an additional benefit of quicker establishment of feeds. There was no significant difference in complication and conversion rates between laparoscopic techniques. Despite a longer operative time, LRDA provides a safe minimal access approach for neonates after this consistent implementation of the technique in the past decade.

Energy and Exergy Analysis of an Ejector Expansion Transcritical Carbon Dioxide Air Conditioning System

A carbon dioxide based transcritical air conditioning system integrated with an ejector is thermodynamically modeled and the system is simulated for different ambient conditions. Throughout the analysis, the isentropic efficiency of motive nozzle, suction nozzle and diffuser is assumed as 85% while the mixing takes place at constant pressure. A step-by-step iterative procedure is adopted to obtain the pressure lift and entrainment ratio. The present thermodynamic model is validated with the experimental results available in the open literature. Results were then compared to a conventional transcritical carbon dioxide system working between the same operating conditions. Results show a significant improvement of about 21% and more in system performance compared to a conventional system working under the same operating conditions. To justify the application of an ejector as an expansion work recovery device and to identify the component level exergy destruction rate, a comprehensive exergy analysis is implemented and the results show 20% reduction in total exergy destruction rate of the system, with an ejector.

Enhancing fire safety, electromagnetic interference shielding, and photothermal conversion performances of wearable polyamide fabrics through eco-friendly coatings

The demand for smart textiles in wearable technology has significantly increased in the last decade. However, the inherent flammability of most textiles poses a big challenge, especially when exposed to elevated surface temperatures induced by electrical or optical stimuli, increasing the risk of fire. The process of synthesizing flame retardants involves the use of organic solvents, which is not in line with the requirements of sustainable development. This research focuses on establishing an eco-friendly and stable coating for polyamide 6 (PA6) fabric through a solvent-free synthesis and innovative alternating deposition method. It has been demonstrated that the treated PA6 fabric exhibits rapid self-extinguishing properties, eliminating melt dripping and achieving a remarkable limiting oxygen index of 25.5%. Furthermore, the peak heat release rate and total heat release rate of the treated PA6 fabric decrease by 32.9% and 22.7%, respectively, compared to that of the control PA6. Under simulated sunlight exposure at an intensity of 150 mW·cm−2, the treated PA6 fabric rapidly reaches a surface temperature of 78.6 °C within 300 s. Additionally, the treated PA6 fabric demonstrates an electromagnetic interference (EMI) shielding efficiency of 24.0 dB in the X-band, highlighting the efficacy of the innovative coating. This result is attributed to the conductive network formed by the alternating deposition of MXene and polyphosphamide. This work not only improves the fire safety in wearable textiles but also presents a promising and green strategy for developing multifunctional wearable textiles with enhanced safety features.

Assessing the Impacts of Climate Change-induced Variations in Air Temperature and Precipitation on Plant Physiological and Soil Microbial Processes with DNDC Model

Abstract The DNDC (DeNitrification-DeComposition) model (version 9.5) was applied to predict the differences in transpiration and photosynthesis rates of perennial grasses (red clover and timothy), and autotrophic respiration of a sandy Spodosol. The input parameters for two growing seasons (from 1st of May to 31st of August in 2010 and 2015) contrasting in meteorological conditions were used in the modeling experiment. In 2010, the mean air temperature of the period was 14.1 ±3.3 °C and the total precipitation – 0.1796 m, while in 2015 the mean air temperature was 16.8 ±5.5 °C and the total precipitation – 0.538 m. These meteorological parameters were unfavorable for plants in 2010 and favorable in 2015. The results have shown that the DNDC model adequately predicted the weather-induced differences in total and mean transpiration rates of perennial grasses: 0.12204 m. and 0.00099 ±0.00040 m.day−1, respectively, under favorable meteorological conditions of 2015 and 0.05969 m. and 0.00049 ±0.00035 m.day−1, respectively, under unfavorable meteorological conditions of 2010. Dynamics of daily transpiration rates of plants was significantly (r = 0.34 p &lt;0.001) correlated with soil water content only under unfavorable meteorological conditions. Mean values of simulated photosynthesis rates were equal to 84.4 ±27.9 kg.C.ha−1.day−1 in 2015 and 52.3 ±23.4 kg.C.ha-1.day−1 in 2010. There were significant differences (p &lt;0.001) in the mean values of photosynthesis rates between the two weather scenarios. The results of one-way analysis of variance (ANOVA) have shown that the rates of autotrophic respiration were significantly (p &lt;0.001) higher under favorable (8.14 ±2.25 kg.C.ha−1.day−1) than under unfavorable (5.17 ±2.19 kg.C.ha−1.day−1) meteorological conditions.

Performance evaluation of the Fe–Cl and Mg–Cl cycle for hydrogen production of the minor actinide fuelled PACER fusion blanket

Thermochemical processes used to produce clean hydrogen (H2) on a large scale by utilizing renewable energy and nuclear power sources are considered one of the most environmentally friendly strategies. In this study, the neutronic performance and hydrogen production potential of the PACER fusion blanket have been investigated during the operation period. Firstly, neutronic calculations have been performed to produce an electrical energy of 1000 MW from fusion explosions of 8.36 TJ to be repeated every 40 min with Monte Carlo Calculation Method (MCNP). Minor actinide flouride (MA) fuel out of the nuclear waste of LWRs with volume fractions of 2% have been mixed homogenously in the Flibe coolant. Tritium breeding ratio (TBR) at startup is calculated as 1.27. TBR and energy multiplication factor (M) decrease gradually. TBR >1.05 can be kept over 7 years for a self-sustained reactor. The M due to higher fissionable fuel content in the molten salt computes as 3.3 at initial. The burn up exceeds ∼800 GWd/tM at the end of operation period. Secondly, the potential of hydrogen production for four step iron chloride (Fe–Cl) and three step magnesium chloride (Mg–Cl) thermochemical cycles of the hydrogen unit PACER fusion blanket. The ratio of thermal power (1 − ψ), total thermal power (Phpf) and rate of mass flow of hydrogen (m˙H2) depends on M for Fe–Cl, Mg–Cl (option I) and Mg–Cl (option II) thermochemical cycle have been presented. The ratio of thermal power (1 − ψ) for Fe–Cl, Mg–Cl (option I) and Mg–Cl (option II) have been obtained as 0.6494, 0.131 and 0.095 whereas, total thermal power (Phpf) have been computed as 5298.8, 3608.43 and 3488.925 MW, respectively, at start up. The produced of hydrogen amount for Fe–Cl, Mg–Cl (option I) and Mg–Cl (option II) have been calculated as ∼ 534.65; ∼1236.82 and ∼806.03 kg/year, respectively, at startup.