Total Metal Concentrations Research Articles

Tailings particle size effects on pollution and ecological remediation: A case study of an iron tailings reservoir

The particle size distribution in tailings notably influences their physical properties and behavior. Despite this, our understanding of how the distribution of tailings particle sizes impacts in situ pollution and ecological remediation in in-situ environment remains limited. In this study, an iron tailings reservoir was sampled along a particle flow path to compare the pollution characteristic and microbial communities across regions with different particle sizes. The results revealed a gradual reduction in tailings particle size along the flow direction. The predominant mineral composition shifts from minerals such as albite and quartz to layered minerals. Total nitrogen, total organic carbon, and total metal concentrations increased, whereas the acid-generating potential decreased. The region with the finest tailings particle size exhibited the highest microbial diversity, featuring metal-resistant microorganisms such as KD4–96, Micrococcaceae, and Acidimicrobiia. Significant discrepancies were observed in tailings pollution and ecological risks across different particle sizes. Consequently, it is necessary to assess tailings reservoirs pollution in the early stages of remediation before determining appropriate remediation methods. These findings underscore that tailings particle distribution is a critical factor in shaping geochemical characteristics. The responsive nature of the microbial community further validated these outcomes and offered novel insights into the ecological remediation of tailings.

Nickel, chromium, and cobalt in soils developed on nickel laterites near an abandoned mining area in southern Czech Republic

Geochemical anomalies are gaining importance due to the Europe's renewed prospecting activities for technologically critical metals, such as nickel (Ni) and cobalt (Co). In this context, soils developed on Ni laterites near old open pit mining and exploration works near Křemže in southern Czech Republic were investigated using multi-method approach to assess the distribution, solid speciation, and (bio)availability of the trace metals, with a particular focus on Ni, chromium (Cr), and Co. The total concentrations of metals in the studied soils (Ni: 170–4950 mg/kg, Cr: 56–1190 mg/kg, Co: 14–424 mg/kg) exceeded the median world regulatory guideline values (Ni: 112 mg/kg; Cr: 250 mg/kg; Co: 50 mg/kg) as well as the Czech concentration limits for agricultural soils for most of the samples. The concentration of metals in the soil profiles generally increased as a function of depth with surface horizons in agricultural plots homogenized by ploughing. The effect of a former open pit mine (already closed for ca 80 years) on the vertical distribution of metallic elements has not been demonstrated. The extractable metals were relatively low (extraction efficiency order: water < DTPA < EDTA). The mean EDTA-extractable values corresponded to 4.2 % Nitot, 8.6 % Cotot, and only 0.14 % Crtot. This contrasting metal availability is strictly related to the metal speciation in the solid phase. The primary minerals (olivine, clinopyroxene) are highly weathered to secondary phyllosilicates (lizardite, talc) and Fe oxyhydroxides and Mn oxides, all representing important carriers for Ni. Cobalt was exclusively hosted by Mn oxides, and the less mobile Cr was mainly bound in insoluble phases, likely spinel-family oxides. Despite the relatively low metal availability, elevated concentrations of Ni in the crop biomass (86 mg/kg) collected in the agricultural area suggest a metal uptake from the soil, which should be further investigated in detail.

Comparison of sediment bioavailable methods to assess the potential risk of metal(loid)s for river ecosystems

A heavily impacted river basin (Caudal River, NW Spain) by Hg and Cu mining activities, abandoned decades ago, was used to evaluate the environmental quality of their river sediments. The obtained results compared with reference values established by the US EPA and the Canadian Council of Ministers of the Environment for river sediments, have shown that the main elements of environmental concern are arsenic (As), mercury (Hg) and, to a lesser extent, copper (Cu), which reach concentrations up to 1080, 80 and 54 mg kg−1, respectively. To understand the role that river sediments play in terms of risk to ecosystem health, a comparison has been made between the total content of metal(oid)s in the sediments and the bioavailable contents of the same elements in pore water, passive DGT (Diffusive Gradients in Thin films) samplers and the sediment extractant using acetic acid. A good correlation between the As and Cu contents in the DGTs and the pore water was found, resulting in a transfer from the pore water to the DGT of at least 47 % of the Cu and more than 75 % of the As when the concentrations were low, with a deployment time of 4 days. When As and Cu concentrations were higher, their transfer was not so high (above 23.6 % for As and 19.3 % for Cu). The transfer of Hg from the pore water to the DGT was practically nil and does not seem to depend on the content of this metal. The fraction extracted with acetic acid, conventionally accepted as bioavailable, was clearly lower than that captured by DGTs for As and Cu (≤5 % and ≤8.5 % of the total amount, respectively), while it was similar for Hg (0.2 %).

Efficient Hydrogen Evolution from Dimethylamine Borane, Ammonia Borane and Sodium Borohydride Catalyzed by Ruthenium and Platinum Nanoparticles Stabilized by an Amine Modified Polymer Immobilized Ionic Liquid: a Comparative Study

Platinum and ruthenium nanoparticles stabilised by an amine modified polymer immobilised ionic liquid (MNP@NH2-PEGPIILS, M = Pt, Ru) catalyse the hydrolytic liberation of hydrogen from dimethylamine borane (DMAB), ammonia borane (AB) and NaBH4 under mild conditions. While RuNP@NH2-PEGPIILS and PtNP@NH2-PEGPIILS catalyse the hydrolytic evolution of hydrogen from NaBH4 with comparable initial TOFs of 6,250 molesH2.molcat−1.h−1 and 5,900 molesH2.molcat−1.h−1, respectively, based on the total metal content, RuNP@NH2-PEGPIILS is a markedly more efficient catalyst for the dehydrogenation of DMAB and AB than its platinum counterpart, as RuNP@NH2-PEGPIILS gave initial TOFs of 8,300 molesH2.molcat−1.h−1 and 21,200 molesH2.molcat−1.h−1, respectively, compared with 3,050 molesH2.molcat−1.h−1 and 8,500 molesH2.molcat−1.h−1, respectively, for PtNP@NH2-PEGPIILS. Gratifyingly, for each substrate tested RuNP@NH2-PEGPIILS and PtNP@NH2-PEGPIILS were markedly more active than commercial 5wt % Ru/C and 5wt% Pt/C, respectively. The apparent activation energies of 55.7 kJ mol−1 and 27.9 kJ mol−1 for the catalytic hydrolysis of DMAB and AB, respectively, with RuNP@NH2-PEGPIILS are significantly lower than the respective activation energies of 74.6 kJ mol−1 and 35.7 kJ mol−1 for its platinum counterpart, commensurate with the markedly higher initial rates obtained with the RuNPs. In comparison, the apparent activation energies of 44.1 kJ mol−1 and 46.5 kJ mol−1, for the hydrolysis NaBH4 reflect the similar initial TOFs obtained for both catalysts. The difference in apparent activation energies for the hydrolysis of DMAB compared with AB also reflect the higher rates of hydrolysis for the latter. Stability and reuse studies revealed that RuNP@NH2-PEGPIILS recycled efficiently as high conversions for the hydrolysis of DMAB were maintained across five runs with the catalyst retaining 97% of its activity.Graphical

Seasonal variation of heavy metals in water and Cyprinus carpio L. from Umiam Lake reservoir of Meghalaya, India: Potential health risk assessment for human consumption.

The purpose of this study is to assess the seasonal variation of heavy metal concentration in water and fish tissues of common carp (Cyprinus carpio L.) from the Umiam Lake reservoir located in the Ri bhoi district of Meghalaya, India, and to elucidate the possible human health risk of ingesting fish captured from the contaminated lake. Results show significant (p < 0.05) seasonal differences of heavy metal concentrations in the water and different tissues of fish Cyprinus carpio L.. The total concentration of heavy metals in the water exceeds the WHO and BIS standards and thus poses a significant threat to the aquatic flora and fauna of the reservoir. The heavy metal concentrations in fish tissues were tissue-dependent, where the average concentration of heavy metals in all the tissues of Cyprinus carpio L. was in the order of Cr > Pb > Cu > Cd. In addition, the health risk assessment suggests that the heavy metals in the fish muscle from the Umiam Lake reservoir might have adverse effects on human. Therefore, the overall results of the study provide an understanding on the seasonal distribution of heavy metals in water, provide insight on their bioaccumulation in the fish tissues, and highlights the potential health risk for the local population of long-term fish consumption from Umiam Lake reservoir.

Partitioning of metals in the tissues and cytosolic fraction of Cerastoderma edule

The concentrations of Cd, Cu and Zn have been determined in the tissues and the cytosolic fraction of the common cockle, Cerastoderma edule, collected from sediments in the Tamar, Plym and Avon estuaries (South West, England). Metal concentrations in the tissues of C. edule from the Avon were lower than those from the Tamar and Plym, except for Cu in the digestive gland. Significant statistical relationships were only obtained between the total sedimentary metal concentrations and Cd in the body of C. edule and Cu in the digestive gland. The cytosolic fraction was extracted from each of the tissues and separated for protein analysis thereby allowing determination of the metal contents in high molecular weight (HMW) compounds, metallothionein-like proteins (MTLP) and very low molecular weight (VLMW) compounds. The digestive glands of C. edule from the Avon had relatively low concentrations of MTLP, whereas MTLP concentrations in the digestive gland of cockles from the Tamar and Plym were higher. The cytosolic fraction of C. edule had relatively low total Cd and Cu concentrations associated with MTLP, whereas Zn was preferentially associated with the HMW and the VLMW components. The results are relevant to metal distributions in C. edule and the role of cytosols in the management of metals by C. edule and other invertebrates.

Concentration of heavy metals in soil and leaves of Conocarpus Erectus Tree: A Biomonitoring Study, Ahvaz, Iran.

Heavy metals biomonitoring was performed using the Conocarpus erectus tree in Ahvaz city. Composite leaf and soil samples were collected from 23 selected stations. The concentrations of heavy metals (Pb, Zn, Cd, Cu, Fe and Mn) in leaf and soil samples, and bioavailability of metals in soil samples were determined. Examination of soil physicochemical parameters proved neutral to slightly alkaline nature, and low organic matter content in the soil samples. The mean concentration of heavy metals in soil was: Fe > Mn > Zn > Pb > Cu. Ecological risk assessment of heavy metals was in the range of safe to low risk (RI < 150). Although the concentration of metals in the more polluted areas was higher in both leaf and soil samples, there was no significant relationship between the concentrations of metals in the leaf and soil samples. This relationship is even lower between the bioavailable component of metals in the soil and the concentration of metals in the leaves. Transfer factor values based on total contents of metals in soil samples indicated that Conocarpus erectus is mostly contaminated with Zn and Cu. The results of Accumulation factor of plant revealed that Pb, Zn, and Fe were mostly enriched in the plant by anthropogenic activities. MAI values in heavy and light traffic, and industrial areas were 11.88, 8.01 and 8.15, respectively. In general, it is evident that the Conocarpus erectus leaves accumulate heavy metals in polluted areas, so it can be used as a bioindicator of air pollution with heavy metals in regions with similar conditions.

Assessment of Metal Contamination in Soil Adjacent to Mining Activities Using Some Indices

ABSTRACT A thorough assessment of soil contamination with metals allows us to know the ecological and public health risks it poses. In this study, we address the use of mathematical indices derived from the total metal concentration in soil and rock. Soil and rock samples were collected from a total of 19 sites near tailing heaps. Mine tailings were sampled, and total metal concentrations were determined using atomic absorption spectrophotometry, and contamination indices were calculated. The results revealed high metal concentrations in mine tailing (4841, 1488, and 82 mg/kg Zn, Pb, and Cd, respectively) and soils (4539 mg/kg Pb, 6190 mg/kg Zn, and 48 mg/kg Cd, respectively), while rock had a low metal content, consistent with literature reports. The indices indicated various proportions of samples with different degrees of contamination. Individual indices (EF, Igeo, and CF) showed the highest levels of Pb, Zn, and Cu contamination, while overall indices (Cdeg, PLI, and MCI) indicated a higher proportion of samples with moderate contamination, albeit with some highly contaminated ones.

Soil Quality Indices Based on Biological Properties to Assess Chemical Soil Degradation by Metal(loid)s

ABSTRACT Soil quality assessments, rarely applied to contaminated soils with metal(loid)s, consider ecological topics such as multifunctionality, resistance and resilience of microbial communities to perturbations, in addition to ecosystem services. In this study, the effect of metal(loid) contamination was evaluated in soils based on physicochemical and biological properties at different distances from an industrial complex and a Cu smelter. From these properties, soil quality indices (SQIs) were tested to compare their sensitivity and relationship with metal(loid) contamination. Enzyme activities and the average well color development, obtained from the community-level physiological profile, were the most suitable soil quality indicators. These variables along with some physicochemical properties [e.g. total organic carbon, pH, and available metal(loid) contents] were selected to develop SQIs. Five SQIs were calculated, from which the Multifunctionality assessment and the AreaSQI were found to be suitable methods to develop SQIs due to their higher discriminant power and relationship with metal(loid) contamination compared to other SQIs. They were validated using data from the literature, and both showed decreasing values at higher levels of metal(loid) contamination. Although the AreaSQI represents an attractive approach due to its visualization and easy interpretation, the multifunctionality approach showed a stronger sensitivity to chemical degradation by metal(loid)s in soil and offered an easier and faster calculation alternative.

Analysis of effects and factors linked to soil microbial populations and nitrogen cycling under long-term biosolids application

Information about impacts of long-term biosolids application on soil microbial populations and functional groups and N cycling is important for evaluating soil health and agroecosystem sustainability under long-term biosolids application. Mine spoil plots received annual biosolids application from 1973 to 2010 at low (16.8 Mg ha−1 yr−1), medium (33.6 Mg ha−1 yr−1), and high rates (67.2 Mg ha−1 yr−1). A no-biosolids control received chemical fertilizer at the agronomic rate. Soil samples were collected in three seasons per year spanning 2003–2005 for measuring soil moisture, pH, soil organic C (SOC), total and extractable heavy metals (Cd, Cu, Ni, Zn), NO3−, N mineralization potential (NMP), microbial biomass C (MBC), and populations of three N-cycling bacteria (NCB) groups: ammonia-oxidizing bacteria (AOB), nitrite-oxidizing bacteria (NOB), and denitrifying bacteria (DNB). Soil samples were collected again in 2008 and 2010 for quantifying total and extractable heavy metals, and in 2018 (eight years after biosolids applications ended) for measuring SOC, MBC, NMP, and microbial respiration. During 2003–2005, mean MBC was 315, 554, 794, and 1001 mg kg−1 in the control, low, medium, and high biosolids treatments, respectively. Populations of NCB did not differ among treatments. Biosolids application increased total and extractable metal concentrations but the effect of biosolids rates were much lower on extractable than total concentrations. Soil extractable Cd and Cu concentrations decreased from medium to high applications, likely due to complexing with biosolids organic matter. Partial least squares regression analysis identified a strong positive effect on MBC of SOC and a weak negative effect of Cu, explaining the strong net positive effect of biosolids on MBC. In 2018, the medium and high biosolids treatments maintained higher SOC, MBC, NMP, and microbial respiration than the control. This study provided further evidence that long-term biosolids application has positive effects on soil microbes that persist for years after ending application.

Carcinogenic metal(loid)s in house dust compared to soil: Concentrations and gastric bioaccessibility

As a sink and a source of chemicals, house dust represents a relevant medium to assess indoor exposure to metal(loid)s via incidental ingestion or inhalation. However, nationally representative indoor data are scarce. Results from the Canadian House Dust Study (CHDS, 2007–2010; n = 1025) provide nationally representative mean, median and 95th percentile concentrations for 38 elements in typical urban house dust, along with their gastric bioaccessibility. Total concentrations (median/95th percentile) of carcinogenic metal(loid)s in Canadian house dust (μg g−1) are as follows: As (9.0/40), Be (0.4/0.9), Cd (3.5/17), Co (5.6/19), Cr (99/214), Ni (62/322) and Pb (100/760). Total As and Pb concentrations in house dust exceed residential soil guidelines for the protection of human health in about one-third of Canadian homes. Percent bioaccessibilities (median) are: Cd (65%) > Pb (63%) > Be ∼ Ni (36%) > Co (35%) > As (20%) > Cr (15%). Lead, Cd and Co concentrations are significantly greater in older houses (< 1976). Data from two pilot studies (n = 66 + 51) further demonstrate the distinct geochemistry of house dust compared to soils, notably enrichment of carcinogenic metal(loid)s and their increased bioaccessibility. These results provide essential baseline values to refine risk assessment and inform on health risk at contaminated sites.

The Influence of the Soil Profile on the Formation of the Elemental Image of Grapes and Wine of the Cabernet Sauvignon Variety.

The features for assessing the authenticity of wines by region of origin are studied, based on the relationship between the mineral composition of the wine, the grapes, and the soil profile (0 to 160 cm) from the place of growth of Cabernet Sauvignon grapes. Soil, grape, and wine samples were taken from the territories of six vineyards in the Anapa district of Krasnodar Territory, Russia. Using the methods of ICP-OES, thermal, and X-ray phase analysis, the soils were differentiated into three groups, differing in mineralogical and mineral compositions. The soil samples of the first group contained up to 31% quartz, the second group up to 25% quartz and 19% mixed calcite, and the third group up to 32% calcite and 15% quartz. The formation of the elemental image of the grapes was studied, taking into account the total content and mobile forms of metals in the soil. The territorial proximity of the vineyards did not affect the extraction of elements from the soil into the grape berry, and the migration of metals for each territory was selective. According to the values of the biological absorption coefficient, the degree of transition of metals from the soil to a berry was estimated. For K, Ti, Zn, Rb, Cu, and Fe in all berries, the coefficient was higher than 1.00, which means that the berry extracts contained not only mobile-form, but also difficult-to-dissolve metal compounds. The migration of macro-components from the soil to the berry was low, and amounted to 6-7% for Ca, 0.8-3.0% for Na, and 25-70% for Mg of the concentration of their mobile forms. For all territories, the maximum correlation between metal concentrations in grapes and soil was observed for samples from a depth of 0-40 cm. The discriminant model based on concentrations of Rb, Al, K, Sr, Co, Na, Pb, Ca, and Ni showed the formation of clusters in the territories of vineyard cultivation. The developed model allow the problems of identifying wines by region to be solved with high accuracy, using their elemental image.

Influence of Carbons on Metal Stabilization and the Reduction in Soil Phytotoxicity with the Assessment of Health Risks

Despite notable achievements in the development and application of the remediation of metal-contaminated soils, the search for and study of promising immobilizing agents continues. This article presents a new approach to using brown coal and activated carbon and their application for metal stabilization. An experiment was conducted to test Medicago falcata L. on soils from industrial areas contaminated with varying levels of lead (Pb), cadmium (Cd), chromium (Cr), zinc (Zn), copper (Cu), and nickel (Ni) with the addition of carbons. This plant is a stress-tolerant leguminous species. In this study, the total content of metals in soil and the available forms to plants (single extractions with 0.02 M ethylenediaminetetraacetic acid, EDTA) were determined, along with metal contents in the plant. The use of carbons lowered the phytoavailable forms of metals for plants and thus, resulted in a reduction in the phytotoxicity of the soils. The contents of the tested metals in the roots and shoots were lower than in the combinations of soils with no carbon added. The activated carbon had a stronger effect on limiting the availability of metals than brown coal in relation to plants growing on soils without added carbon; the percentage of reduction for the shoots was Cr (18.2%) &gt; Zn (11.5%) &gt; Ni (10.7%) &gt; Cu (10.3%) &gt; Cd (8.9%) &gt; Pb (2.4%) and Cu (13.3%) &gt; Cr (12.5%) &gt; Zn (10.5%) &gt; Pb (9.0%) &gt; Ni (5.7%) &gt; Cd (4.6%) for roots. Metals reduced the growth of Medicago falcata L. roots from 44 to 21%, while the growth of shoots was reduced from 25 to 2%. Adding carbons to soils in all combinations resulted in a decrease in the following pollution indices: pollution index (PI), pollution load index (PLI), and non-carcinogenic (HQ) and carcinogenic risk factors (ILCR).

Considering the bioavailability and bioaccessibility of metal(loid)s for risk assessment of soils affected by different non-ferrous metal activities in Southwest China

Toxic metal(loid)s released into the soil by non-ferrous metal mining and smelting activities pose a serious threat to residents and the surrounding ecosystem. Considering only total metal(loid) concentrations likely overestimates routine (eco)toxicological risk assessment of soil. We hypothesize that considering metal(loid) bioavailability/accessibility will improve the accuracy of risk assessment. To test this hypothesis, four mining areas in Southwest China, including mining and surrounding sites, were studied. Bioavailability was determined considering metal(loid)s leached by a simulated strong acid rain (SSAR) treatment. In the four areas, the mining site showed higher cumulative releases of metal(loid)s under SSAR treatment than the agricultural field located in the surrounding sites. Thus, the bioavailable metal(loid)s contents were continuously being released during SSAR treatment and likely increased the environmental risk. Ecological and health risk assessment of soil, calculated using total metal(loid)s content, was corrected considering bioavailable/accessible metal(loid)s, which was determined by the heavy metal(loid)s forms and in vitro simulated intestinal stages. Although the corrected indices indicated that the risk of metal(loid)s-contaminated soil was reduced, unfavorable ecological and health risks remained in the four areas. Our study provides new perspectives to better predict the risk of bioavailable/accessible metal(loid)s in non-ferrous metal contaminated and surrounding soils.

Biosorption of gold(III) from leachates of waste printed circuit boards by baker's yeast

A microbial method using commercially available baker's yeast was developed for efficiently and selectively collecting aqueous Au(III) ions in aqua regia leachates from waste printed circuit boards (PCBs) through biosorption under air at temperatures ranging from 10 °C to 34 °C. Even when the total concentration of base metals was much higher than the initial Au concentration in the PCB leachate with high acid concentrations of 4.7–5.6 mol/L, commercial dry baker's yeast exhibited an excellent ability to selectively collect aqueous Au ions from the leachate within 60 min. When the biosorption test was repeated as a three-stage batch operation, the percentage biosorption of Au from the PCB leachate increased from 61% to 99% with 36 g/L dry yeast cells at 34 °C. The experimental results for the three-stage batch biosorption test were consistent with theoretical predictions based on the material balance of Au in multistage equilibrium operations and the distribution coefficient of Au. Equilibrium data of the Au biosorption conformed to the linear isotherm, regardless of the yeast concentration and the initial Au concentration in the leachate. The distribution coefficient KAu at 34 °C decreased by 30%, from 53.7 to 37.3 L/kg-dry cells, as the total base metal concentration in the leachate was increased tenfold, from 1.94 to 16.4–19.1 g/L. Moreover, the distribution coefficient of Au at 10 °C to 34 °C was analyzed to determine thermodynamic parameters according to the van't Hoff equation. The thermodynamic studies indicated that the biosorption of aqueous Au ions by baker's yeast was spontaneous and exothermic.

Assessment of water quality and heavy metal contamination in ballast water: Implications for marine ecosystems and human health

The global menace of non-compliance with ballast water management poses a pressing environmental threat, as it facilitates the transfer of harmful organisms and sediment contaminants. This study investigates the environmental impact of ballast water discharged by ships, focusing on water quality and heavy metal concentrations. The release of ballast water, often containing elevated levels of heavy metals like mercury, lead, and cadmium, poses a significant threat to marine ecosystems. The research, involving water sample collection from ten different vessels across various countries, assesses physicochemical parameters and heavy metal concentrations. Results indicate variations in temperature, turbidity, conductivity, dissolved oxygen, and pH levels among samples. Turbidity values surpassing WHO limits suggest potential anthropogenic pollution. The study identifies significant differences in pH values, potentially influencing microbial populations. Total dissolved solids and total suspended solids values vary, affecting the distribution of potential pathogens. The results reveal varying total concentrations of heavy metals (mg/L) in the following decreasing order: SA&gt;SE&gt;SF&gt;SB&gt;SC&gt;SD&gt;SH&gt;SI&gt;SG&gt;SJ(6.07 &gt;4.95 &gt; 2.07 &gt; 1.59&gt;0.24&gt;1.22&gt;0.09&gt;0.04&gt;0.03&gt;0.01). The highest concentration of heavy metals is recorded for iron (SA= 5.78), zinc (mg/L) (SB = 1.36, SE = 1.30, and SF = 1.35) and lead (Pb) (SE = 2.39). The elevated iron levels in vessels from SA are potentially linked to corrosion processes. Cadmium, lead, and nickel were not detected, except for lead in the sample from SE. Copper concentrations were aligned with EU standards in the vessels. Proper ballast water management is vital for monitoring water qualities, preventing environmental spread of heavy metals, ensuring marine ecosystem health, and developing compliance strategies for ships docking in ports. Highlights Global shipping causes heavy metal pollution, affecting human and ecosystem health Physicochemical parameters variations suggest potential pollution and microbial impact Mercury, lead, and cadmium in ballast water (BW) pose threats to marine ecosystems Increased iron levels could be associated with corrosion processes Effective BW management is crucial for environmental conservation

Equilibrium partitioning approach for metal toxicity assessment in tropical estuarine sediment of Bandon Bay, Thailand

An equilibrium partitioning approach (EqPA) was employed to evaluate the metal toxicity and define sediment quality guidelines (SQGs) for arsenic (As), cadmium (Cd), chromium (Cr), copper (Cu), nickel (Ni), lead (Pb), zinc (Zn), and mercury (Hg) in the cockle cultivated areas located in Bandon Bay, Thailand. An assessment of metal toxicity using the [∑SEM]-[AVS] and [∑SEM]-[AVS]/foc models indicated no adverse effect on benthic organisms. The normalized total metal concentrations in this area were below the established SQG values for As, Cd, Cu, Ni, Pb, Zn, and Hg, namely respectively 21.3, 0.8, 84.6, 36.0, 34.6, 440.9 mg/kg dry weight, and 49.3 μg/kg dry weight on sand and calcium carbonate free with 1 % total organic carbon basis, suggesting low metal toxicity. This study provides locality adapted SQG values for supporting sediment quality management specifically in Bandon Bay, potentially serving as a model for other coastal areas.

Driving factors for distribution and transformation of heavy metals speciation in a zinc smelting site

Heavy metal pollution at an abandoned smelter pose a significant risk to environmental health. However, remediation strategies are constrained by inadequate knowledge of the polymetallic distribution, speciation patterns, and transformation factors at these sites. This study investigates the influence of soil minerals, heavy metal occurrence forms, and environmental factors on heavy metal migration behaviors and speciation transformations. X-ray diffraction analysis revealed that the minerals associated with heavy metals are mainly hematite, franklinite, sphalerite, and galena. Sequential extraction results suggest that lead and zinc are primarily present in the organic-sulfide fractions (F4) and residual form (F5) in the soil, accounting for over 70% of the total heavy metal content. Zinc displayed greater instability in carbonate-bound (16%) and exchangeable (2%) forms. The migration and diffusion patterns of heavy metals in the subsurface environment were visualized through the simulation of labile state heavy metals, demonstrating high congruence with groundwater pollution distribution patterns. The key environmental factors influencing heavy metal stable states (F4 and F5) were assessed by integrating random forest models and redundancy analysis. Primary factors facilitating Pb transformation into stable states were available phosphorus, clay content, depth, and soil organic matter. For Zn, the principal drivers were Mn oxides, soil organic matter, clay content, and inorganic sulfur ions. These findings enhance understanding of the distribution and transformation of heavy metal speciation and can provide valuable insights into controlling heavy metal pollution at non-ferrous smelting sites.

Prediction models for bioavailability of Cu and Zn during composting: Insights into machine learning

Bioavailability assessment of heavy metals in compost products is crucial for evaluating associated environmental risks. However, existing experimental methods are time-consuming and inefficient. The machine learning (ML) method has demonstrated excellent performance in predicting heavy metal fractions. In this study, based on the conventional physicochemical properties of 260 compost samples, including compost time, temperature, electrical conductivity (EC), pH, organic matter (OM), total phosphorus (TP), total nitrogen, and total heavy metal contents, back propagation neural network, gradient boosting regression, and random forest (RF) models were used to predict the dynamic changes in bioavailable fractions of Cu and Zn during composting. All three models could be used for effective prediction of the variation trend in bioavailable fractions of Cu and Zn; the RF model showed the best prediction performance, with the prediction level higher than that reported in related studies. Although the key factors affecting changes among fractions were different, OM, EC, and TP were important for the accurate prediction of bioavailable fractions of Cu and Zn. This study provides simple and efficient ML models for predicting bioavailable fractions of Cu and Zn during composting, and offers a rapid evaluation method for the safe application of compost products.

Oxidative potential of the inhalation bioaccessible fraction of PM10 and bioaccessible concentrations of polycyclic aromatic hydrocarbons and metal(oid)s in PM10

Atmospheric particulate matter (PM) has been related to numerous adverse health effects in humans. Nowadays, it is believed that one of the possible mechanisms of toxicity could be the oxidative stress, which involves the development of reactive oxygen species (ROS). Different assays have been proposed to characterize oxidative stress, such as dithiothreitol (DTT) and ascorbic acid (AA) acellular assays (OPDTT and OPAA), as a metric more relevant than PM mass measurement for PM toxicity. This study evaluates the OP of the bioaccessible fraction of 65 PM10 samples collected at an Atlantic Coastal European urban site using DTT and AA assays. A physiologically based extraction (PBET) using Gamble’s solution (GS) as a simulated lung fluid (SLF) was used for the assessment of the bioaccessible fraction of PM10. The use of the bioaccessible fraction, instead of the fraction assessed using conventional phosphate buffer and ultrasounds assisted extraction (UAE), was compared for OP assessment. Correlations between OPDTT and OPAA, as well as total and bioaccessible concentrations of polycyclic aromatic hydrocarbons (PAHs) and metal(oid)s, were investigated to explore the association between those compounds and OP. A correlation was found between both OP (OPDTT and OPAA) and total and bioaccessible concentrations of PAHs and several metal(oid)s such as As, Bi, Cd, Cu, Ni, and V. Additionally, OPDTT was found to be related to the level of K+.