Total Reflection Research Articles

Printing and dyeing of halloysite nano clay hybrid with natural chlorophyll dye on cotton fabric

This work deals with the synthesis of hybrids formed by the natural dye chlorophyll and halloysite for their subsequent application in the textile field. Once the pigments have been synthesised, with 98% adsorption, they are used for two textile colouring functions, namely printing and dyeing. In both cases, satisfactory and interesting results were obtained. The hybrids were characterised by FTIR, XRD, TGA, SEM-EDX, BET and all the appropriate colour measurements were carried out to obtain the coordinates in CIELAB space and also to know their total solar reflectance (TSR) 45.98%. In addition, statistical techniques were used with the use of ANOVA to evaluate the results obtained. The dyeing was carried out by exhaustion and its use was compared with the use of nibbled and non-nibbled fabrics. The textiles were tested for fastness and the results are presented in instrumentally obtained grey scale values, achieving in some cases values of 4-5. Thus, the chlorophyll adsorption capacity of halloysite and its stabilisation for subsequent application in printing and dyeing processes on textile substrates has been demonstrated. This process could be scalable at an industrial level.

Improving membrane distillation performance by Fe(II) activated sodium percarbonate oxidation during the treatment of shale gas produced water

Membrane distillation (MD) offers promise for recycling shale gas produced water (SGPW), while membrane fouling is still a major obstacle in standalone MD. Herein, sodium percarbonate (SPC) oxidation was proposed as MD pretreatment, and the performance of the single MD, SPC-MD hybrid process and Fe(II)/SPC-MD hybrid process for SGPW treatment were systematically evaluated. Results showed that compared to raw SGPW, the application of SPC and Fe(II)/SPC led to the decrease of the fluorescent organics by 28.54% and 54.52%, respectively. The hydrophobic fraction decreased from 52.75% in raw SGPW to 37.70% and 27.20% for SPC and Fe(II)/SPC, respectively, and the MD normalized flux increased from 0.19 in treating raw SGPW to 0.65 and 0.81, respectively. The superiority of SPC oxidation in reducing the deposited membrane foulants and restoring membrane properties was further confirmed through scanning electron microscopy observation, attenuated total reflection fourier transform infrared, water contact angle and surface tension analyses of fouled membranes. Correlation analysis revealed that hydrophobic/hydrophilic matters and fluorescent organics in SGPW took a crucial role in MD fouling. The mechanism of MD fouling mitigation by Fe(II)/SPC oxidation was attributed to the decrease in concentrations and hydrophobicity of organic by synergistic oxidation, coagulation and adsorption.

Experimental assessment of the effective-medium approach for disordered monolayers of particles with high scattering losses

The validity of using an effective-medium approach (EMA) to model the reflectivity of a disordered monolayer of particles that scatter light significantly is tested experimentally. To achieve this, we measured the optical reflectivity versus the angle of incidence in an internal reflection configuration of a disordered monolayer of polymeric particles with negligible optical absorption and a diameter of about half a wavelength (size parameter of 1.2) deposited on a glass-air interface. We found a clear effective-medium film equivalence, even for low particle densities and for angles of incidence well beyond the critical angle, where light penetrates the monolayer less than a particle diameter.

Unraveling the influence of CRISPR/Cas13a reaction components on enhancing trans-cleavage activity for ultrasensitive on-chip RNA detection.

The CRISPR/Cas13 nucleases have been widely documented for nucleic acid detection. Understanding the intricacies of CRISPR/Cas13's reaction components is pivotal for harnessing its full potential for biosensing applications. Herein, we report onthe influence of CRISPR/Cas13a reaction components on its trans-cleavage activity and the development of an on-chip total internal reflection fluorescence microscopy (TIRFM)-powered RNA sensing system. We used SARS-CoV-2 synthetic RNA and pseudovirus as a model system. Our results show that optimizing Mg2+ concentration, reporter length, and crRNA combination significantly improves the detection sensitivity. Under optimized conditions, we detected 100 fM unamplified SARS-CoV-2 synthetic RNA using a microtiter plate reader. To furtherimprove sensitivity and provide a new amplification-free RNA sensing toolbox, we developed a TIRFM-based amplification-free RNA sensing system. We were able to detect RNA down to 100 aM. Furthermore, the TIRM-based detection system developed in this study is 1000-fold more sensitive than the off-coverslip assay. The possible clinical applicability of the system was demonstrated by detecting SARS-CoV-2 pseudovirus RNA. Our proposed sensing system has the potential to detect any target RNA with slight modifications to the existing setup, providing a universal RNA detection platform.

New approach for deacidification and consolidation of bone artifacts

AbstractAcidic conditions affect the archaeological bone in the burial and in uncontrolled display and storage environment or due to improper restoration processes. Accordingly, bones become weak and fragile. This study aims to evaluate nano calcium propionate and nano styrene butyl acrylate (used for the first time in the treatment of bones) at different concentrations for deacidification and consolidation of fragile bones. New bone samples were prepared. Artificial accelerated aging (acid and heat) was applied to prepare aged untreated samples. Deacidification and consolidation processes using the materials mentioned above were applied. The analytical techniques used were transmission electron microscope (TEM) and thermal gravimetric analysis (TGA) were used for morphological and thermal stability investigation for the prepared nano styrene butyl acrylate copolymer and its calcium propionate nonocomposites, a digital microscope and scanning electron microscope (SEM) for investigation of the surface morphology, pH value measurement, change of color measurement, attenuated total reflection—Fourier transform infrared spectroscopy (ATR/FTIR), contact angle (wettability), and X-ray diffraction analysis for measurement of bone crystallinity. The results proved that acid-heat aging affected bone properties such as changes in surface morphology and color, decrease in pH value, and contact angle. Bone samples became more crystalline, and the chemical composition of bone was also affected. The treatment of aged untreated bone samples with the materials used in this study improved their properties, such as increasing the pH value and contact angle. The surface morphology, color change, and crystallinity of bone improved and became more stable.

Deciphering the Mortar Composition of Ancient Chinese Pagodas: A Comparative Analysis from the Tang to Ming Dynasties in Shaanxi Province

The mortar materials from the internal and external walls of ancient Chinese pagodas in Shaanxi (Luoshan Temple Pagoda (847–858 AD), Daxiang Pagoda (960–1279 AD), and Qianjin Pagoda (1609 AD)) were investigated. Qualitative and semi-quantitative techniques including scanning electronic microscopy (SEM), energy-dispersive spectroscopy (EDS), X-ray diffraction (XRD), attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) and thermogravimetric analysis with differential scanning calorimetry (TGA-DSC) were employed. The physical and chemical characteristics including microstructural morphology, chemical composition, element distribution, and organic additives of the mortar samples were studied. SEM indicated that the mortar from the external wall exhibits a tightly bonded matrix, with the irregularly shaped particles, and the carbonation of the calcium carbonate in the mortars closely resembles that of aragonite crystals. The results of EDS, XRD, FTIR and TGA-DSC revealed that mortar from external wall of these ancient pagodas were air-hardened lime, and complete carbonization with no traces of calcium hydroxide, while mortars from internal wall primarily comprises local clay and lime. In addition, ATR-FTIR and iodine-starch discoloration tests confirmed that the presence of starch in the external wall of Daxiang Pagoda, whereas no organic additives were detected in the Qianjin and Luoshan Temple Pagoda.

Sustainable starch-based bioplastics reinforced with carob filler: characterization and biodegradability assessments

Starch-based thermoplastic polymer is a biopolymer that is being widely explored as a replacement for conventional polymers. Since thermoplastic starch suffers from mechanical defects, certain mechanical and thermal properties of starch-based polymers can be improved by incorporating fillers or reinforcements derived mainly from natural substances. This article reports the preparation, physicochemical, and mechanical characterization and biodegradation of starch-based bioplastics extracted from potato (Solanum tuberosum) peels using glycerol (G) as plasticizer and reinforced with carob powder, a readily growing plant in Mediterranean climates. The present study investigates the effect of incorporating different proportions (0, 2, 5, 10, and 15 wt.%) of carob powder (Cb) in the films thus prepared. These biopolymer films were fully characterized using analytical techniques including Fourier transform infrared spectroscopy with attenuated total reflection (FTIR/ATR), thermogravimetric analysis (TGA/DTG), X-ray diffraction (XRD), optical microscopy (OM), Scanning electron microscopy (SEM), mechanical evaluations, and biodegradability assessments. The biodegradability of the obtained bioplastic samples was evaluated. Scanning electron microscopy (SEM) revealed strong interfacial adhesion between the constituent filler and the polymer matrix.

교권침해에 대한 예비교사들의 인식 분석

Objectives The purposes of this study is to analyze the view of pre-service teachers about teachers rights paying attention to the seriousness of the educational crisis caused by the infringement of teachers rights. Methods For this, reflective writing was used for 85 pre-service teachers who were enrolled D university located in Daejeon metropolitan city. Results Pre-service teachers defined teaching rights as a legal right for educational practice and an ethical right socially granted for teaching given to teachers. They recognized that infringement of teachers rights occurred by lack of legal regulations to protect teachers when the teachers rights is violated, distrust of the coercive teachers experienced in school education in the past, intensifying dependence on private education for children’s college entrance, excessive protection of children due to low birth rate and the change in the social perception of the role of teachers. They suggested that teachers rights could be restored through establishing the legal supplementation for teachers rights and strengthening the status of public education, strengthening the role of principal as a teacher's guardian, supporting the formation of the educational community throughout society and trying to have a sense of vocation for teaching by teachers themselves. Conclusions Frist, Pre-service teachers paid more attention to an ethical right arising from the nature of teaching as a personality cultivation than to a legal right given because of being a professional. Second, They recognized teachers as subjective beings in the teaching rights by emphasizing the responsibility of their teaching themselves. Third, They emphasized that teaching rights and student human rights should maintain mutual harmony and balance In light of the inseparable relationship between teaching and learning in education. Forth, It shows that the perception of pre-service teachers about teachers rights is being formed through internal reflection on the nature of education in that they find the cause of the infringement of teachers rights in terms of social structure, while the solution is a formation of an educational community based on mutual respect.

Substrate analysis on the wideband, high gain flower-shaped MIMO antenna

This article presents a single-element,flower-shaped two and four-element MIMO(Multiple Input Multiple Output)antenna with enhanced bandwidth and gain. The array consists of identical elements on three commonly used textile substrates- cotton, jeans, and felt material. For each of the three substrates, the impedance bandwidth, reflection coefficient, and gain are used to assess the effectiveness of the recommended antenna.For the felt-based four-element MIMO antenna the outcomes of measurement and modelling are confirmed. Results reveal that the prototype provides a fractional bandwidth of 133.2%, spans the UWB range (3.1 to 10.6 GHz) and X-band (8 GHz to 12.23 GHz), and has a maximum gain of 16.96 dB.To investigate the MIMO performance, MIMO metrics were computed which include Envelope Correlation Coefficient (ECC), Diversity Gain (DG), Mean Effective Gain (MEG), Channel Capacity Loss (CCL), and Total Active Reflection Coefficient (TARC).

Determination of the Localized Surface Plasmon Resonance Alteration of AgNPs via Multiwavelength Evanescent Scattering Microscopy for Pb(II) Detection.

We developed multiwavelength evanescent scattering microscopy (MWESM), which can acquire plasmonic nanoparticle images at the particle level using the evanescent field as the incident source and distinguish different LSPR (localized surface plasmon resonance) spectral peaks among four wavelengths. Our microscope could be easily and simply built by modifying a commercial total internal reflection fluorescence microscope (TIRFM) with the substitution of a beamsplitter and the addition of a semicircular stop. The ultrathin depth of illumination and rejection of the reflected incident source together contribute to the high sensitivity and contrast of single nanoparticle imaging. We first validated the capability of our imaging system in distinguishing plasmonic nanoparticles bearing different LSPR spectral peaks, and the results were consistent with the scattering spectra results of hyperspectral imaging. Moreover, we demonstrated high imaging quality from the aspects of the signal/noise ratio and point spread function of the single-particle images. Meaningfully, the system can be utilized in rapidly determining the concentration of toxic lead ions in environmental and biological samples with good linearity and sensitivity, based on single-particle evanescent scattering imaging through the detection of the alteration of the LSPR of silver nanoparticles. This system holds the potential to advance the field of nanoparticle imaging and foster the application of nanomaterials as sensors.

Plastics and plastic-bound toxic metals in municipal solid waste compost from Sri Lanka.

This study examined plastics and toxic metals in municipal solid waste compost from various regions in Sri Lanka. Plastics were extracted using density separation, digested using wet peroxidation, and identified using Fourier Transform Infra-Red Spectroscopy in Attenuated Total Reflection mode. Compost and plastics were acid-digested to quantify total Cd, Cu, Co, Cr, Pb, and Zn concentrations and analyzed for the bioavailable fraction using 0.01M CaCl2. Notably, plastics were highly abundant in most compost samples. The main plastic types detected were polyethylene, polypropylene, and cellophane. However, the average Cd, Cu, Co, Cr, Pb, and Zn levels were 0.727, 60.78, 3.670, 25.44, 18.95, and 130.7mg/kg, respectively, which are well below the recommended levels. Zn was the most bioavailable (2.476mg/kg), and Cd was the least bioavailable (0.053mg/kg) metal associated with compost. The Contamination factor data show that there is considerable enhancement of Cd and Cu, however, Cr, Cu, Co, and Pb are at low contamination levels. Mean geo accumulation index values were 1.39, 1.07, - 1.06, - 0.84, - 0.32, and 0.08 for Cd, Cu, Co, Cr, Pb, and Zn. Therefore, the contamination level of compost samples with Cd and Cu ranges from uncontaminated to contaminated levels, whereas Co, Cr, Pb, and Zn are at uncontaminated levels. Despite no direct metal-plastic correlation, plastics in compost could harm plants, animals, and humans due to ingestion. Hence, reducing plastic and metal contamination in compost is crucial.

Infrared Spectroscopy of SARS-CoV-2 Viral Protein: from Receptor Binding Domain to Spike Protein.

Spike (S) glycoprotein is the largest structural protein of SARS-CoV-2 virus and the main one involved in anchoring of the host receptor ACE2 through the receptor binding domain (RBD). S protein secondary structure is of great interest for shedding light on various aspects, from functionality to pathogenesis, finally to spectral fingerprint for the design of optical biosensors. In this paper, the secondary structure of SARS-CoV-2 S protein and its constituting components, namely RBD, S1 and S2 regions, are investigated at serological pH by measuring their amide I infrared absorption bands through Attenuated Total Reflection Infrared (ATR-IR) spectroscopy. Experimental data in combination with MultiFOLD predictions, Define Secondary Structure of Proteins (DSSP) web server and Gravy value calculations, provide a comprehensive understanding of RBD, S1, S2, and S proteins in terms of their secondary structure content, conformational order, and interaction with the solvent.

Arrays of Bowl-Shaped Janus Particle Film with Structured Colors.

Structural colors generated via total internal reflection (TIR) using nanostructure-free micro-concave shapes have garnered increasing attention. However, the application of large micro-concave structures for structural coloration remains limited. Herein, a flexibly tunable structural color film fabricated by casting polydimethylsiloxane (PDMS) on an array of large poly(glycidyl methacrylate) (PGMA) bowl-shaped particles is reported. The resultant film exhibits tunable red to green structural colors with changing observation angles. Moreover, the color can be further tailored by altering the shape of the film itself. The incorporation of the PDMS layer not only facilitates a shift in the locus of TIR from the bottom surface to the top concave surface of the particles, thereby enabling the generation of structural color, but also confers enhanced flexibility to the film. Further decoration with silver nanoparticles imparts antimicrobial properties, yielding a novel antimicrobial coating material with structural colors. The simple and cost-effective strategy for the production of structural color films provides potential applications in antimicrobial coatings, enabling accessible and customizable structural coloration using big-size micro-concave particles.

IL-1β Induces LDL Transcytosis by a Novel Pathway Involving LDLR and Rab27a.

In early atherosclerosis, circulating LDLs (low-density lipoproteins) traverse individual endothelial cells by an active process termed transcytosis. The CANTOS trial treated advanced atherosclerosis using a blocking antibody for IL-1β (interleukin-1β); this significantly reduced cardiovascular events. However, whether IL-1β regulates early disease, particularly LDL transcytosis, remains unknown. We used total internal reflection fluorescence microscopy to quantify transcytosis by human coronary artery endothelial cells exposed to IL-1β. To investigate transcytosis in vivo, we injected wild-type and knockout mice with IL-1β and LDL to visualize acute LDL deposition in the aortic arch. Exposure to picomolar concentrations of IL-1β induced transcytosis of LDL but not of albumin by human coronary artery endothelial cells. Surprisingly, expression of the 2 known receptors for LDL transcytosis, ALK-1 (activin receptor-like kinase-1) and SR-BI (scavenger receptor BI), was unchanged or decreased. Instead, IL-1β increased the expression of the LDLR (LDL receptor); this was unexpected because LDLR is not required for LDL transcytosis. Overexpression of LDLR had no effect on basal LDL transcytosis. However, knockdown of LDLR abrogated the effect of IL-1β on transcytosis rates while the depletion of Cav-1 (caveolin-1) did not. Since LDLR was necessary but overexpression had no effect, we reasoned that another player must be involved. Using public RNAseq data to curate a list of Rab GTPases affected by IL-1β, we identified Rab27a. Overexpression of Rab27a alone had no effect on basal transcytosis, but its knockdown prevented induction by IL-1β. This was phenocopied by depletion of the Rab27a effector JFC1. In vivo, IL-1β increased LDL transcytosis in the aortic arch of wild-type but not Ldlr-/- or Rab27a-deficient mice. The JFC1 inhibitor nexinhib20 also blocked IL-1β-induced LDL accumulation in the aorta. IL-1β induces LDL transcytosis by a distinct pathway requiring LDLR and Rab27a; this route differs from basal transcytosis. We speculate that induction of transcytosis by IL-1β may contribute to the acceleration of early disease.

A high-sensitivity lab-on-a-chip analyzer for online monitoring of nitrite and nitrate in seawater based on liquid waveguide capillary cells.

Optical detection is an indispensable part of microfluidic systems for nutrient determination in seawater. Coupling total internal reflection capillaries with microfluidic chips is a practical alternative to increase the optical path length for high-sensitivity and a low detection limit in colorimetric assays, which has not been applied in microfluidic devices for seawater nutrients. Here, we present an online microfluidic system which integrated a total internal reflection capillary made of Teflon AF 2400 for the high-sensitivity detection of nitrite and nitrate in seawater. The off-chip capillary lengthens the optical path without changing the internal flow path of the microfluidic chip, enhancing the sensitivity, reducing the detection limit and widening the dynamic range of the system, which significantly improves the performance of the microfluidic system based on wet-chemistry. The detection limit for nitrite is 0.0150 μM using an external 20 cm capillary and 0.0936 μM using an internal 5 cm absorption cell, providing an over 6-fold improvement. Laboratory analysis of surface seawater samples collected from the South China Sea with this system and a one-month online deployment of an autonomous analyzer developed based on this system at a station revealed correlations between the nitrite and nitrate with tide, salinity and chlorophyll over slight variations and narrow ranges, demonstrating the high-sensitivity of this method.

Optical and electrophysical properties of nitride TiAlSiN and carbonitride TiAlSiCN coatings: influence of reactive magnetron deposition regimes

The development of thin-film thermal control coatings for small spacecraft is relevant. Coatings based on titanium nitride are capable of functioning in unfavorable conditions of near and deep space, due to their high resistance to the irradiation by high-energy particles. Using the reactive magnetron sputtering method, the nanostructured TiAlSiN and TiAlSiCN coatings were formed on the substrates of silicon oxide (SiO2), glass-ceramic CT-1 and single-crystalline silicon (Si(100)). A study of the electrophysical and optical properties of the formed coatings was carried out. The deposited coatings demonstrate a good reflectivity in the infrared range of spectrum (700–2000 nm), what is important for reducing the overheating of the spacecraft (SC) under the influence of the direct sunlight. In the visible range of spectrum (400–700 nm), a low level of total Rtotal reflection is observed. This is promising for satellites designed to observe the Earth’s surface. The values of solar absorption coefficients αs, emissivity coefficients ε0, ratios αs/ε0, as well as the equilibrium temperature Tр for the samples under study were obtained. The values of resistivity ρ and surface resistance R□, electron concentration N and electron mobility μ were determined. It has been discovered that TiAlSiN, TiAlSiCN films are electrically conductive: ρTiAlSiN = (92÷4260) ∙ 10–7 Ω ∙ m, ρTiAlSiCN = (51÷2360) ∙ 10–7 Ω ∙ m. It has been found that adding carbon to the coating composition reduces the resistance. The obtained nanostructured coatings of TiAlSiN nitride and TiAlSiCN carbonitride can be used as temperature control coatings for small spacecrafts.

Direct 3D-printed ring-resonator photonic circuit on a dual core fiber tip for remote sensing applications.

On-chip optical sensors using ring- and disk-resonators have many potential sensing applications, yet robust and efficient fiber-to-chip coupling and the differing form factor between the two pose deployment challenges. To resolve this, we 3D-printed a ring-resonator onto the tip of a dual-core fiber and demonstrate its use as a remote temperature sensor. The fiber-tip optical circuit is fabricated using direct laser writing (DLW) with two-photon absorption photopolymer material IP-Dip, forming micrometer-scale waveguide cores having a refractive index of 1.53 with a surrounding air cladding. We connect the two-fiber cores by a printed bus-waveguide, utilizing total internal reflection mirrors, allowing light launched into one core to be guided back to the other core. Furthermore, a DLW printed racetrack resonator evanescently coupled to the bus waveguide (Q ∼ 3000) imposes spectral dips on resonance wavelengths. Light sent down into one core is interrogated upon return from the second core, all from the distal end of the sensor. When the sensing end's temperature is varied, we find a sensitivity of 78 pm/K, due to the polymer's thermo-optic index variation. The ring-resonator could be functionalized for other sensing applications.

Correlative single-molecule and structured illumination microscopy of fast dynamics at the plasma membrane

Total internal reflection fluorescence (TIRF) microscopy offers powerful means to uncover the functional organization of proteins in the plasma membrane with very high spatial and temporal resolution. Traditional TIRF illumination, however, shows a Gaussian intensity profile, which is typically deteriorated by overlaying interference fringes hampering precise quantification of intensities—an important requisite for quantitative analyses in single-molecule localization microscopy (SMLM). Here, we combine flat-field illumination by using a standard πShaper with multi-angular TIR illumination by incorporating a spatial light modulator compatible with fast super-resolution structured illumination microscopy (SIM). This distinct combination enables quantitative multi-color SMLM with a highly homogenous illumination. By using a dual camera setup with optimized image splitting optics, we achieve a versatile combination of SMLM and SIM with up to three channels. We deploy this setup for establishing robust detection of receptor stoichiometries based on single-molecule intensity analysis and single-molecule Förster resonance energy transfer (smFRET). Homogeneous illumination furthermore enables long-term tracking and localization microscopy (TALM) of cell surface receptors identifying spatial heterogeneity of mobility and accessibility in the plasma membrane. By combination of TALM and SIM, spatially and molecularly heterogenous diffusion properties can be correlated with nanoscale cytoskeletal organization and dynamics.

Insulin-Mimetic Activity of Herbal Extracts Identified with Large-Scale Total Internal Reflection Fluorescence Microscopy

Diabetes mellitus is a spreading global pandemic. Type 2 diabetes mellitus (T2DM) is the predominant form of diabetes, in which a reduction in blood glucose uptake is caused by impaired glucose transporter 4 (GLUT4) translocation to the plasma membrane in adipose and muscle cells. Antihyperglycemic drugs play a pivotal role in ameliorating diabetes symptoms but often are associated with side effects. Hence, novel antidiabetic compounds and nutraceutical candidates are urgently needed. Phytogenic therapy can support the prevention and amelioration of impaired glucose homeostasis. Using total internal reflection fluorescence microscopy (TIRFM), 772 plant extracts of an open-access plant extract library were screened for their GLUT4 translocation activation potential, resulting in 9% positive hits. Based on commercial interest and TIRFM assay-based GLUT4 translocation activation, some of these extracts were selected, and their blood glucose-reducing effects in ovo were investigated using a modified hen’s egg test (Gluc-HET). To identify the active plant part, some of the available candidate plants were prepared in-house from blossoms, leaves, stems, or roots and tested. Acacia catechu (catechu), Pulmonaria officinalis (lungwort), Mentha spicata (spearmint), and Saponaria officinalis (common soapwort) revealed their potentials as antidiabetic nutraceuticals, with common soapwort containing GLUT4 translocation-activating saponarin.

Insulin-Mimetic Activity of Herbal Extracts Identified with Large-Scale Total Internal Reflection Fluorescence Microscopy

Diabetes mellitus is a spreading global pandemic. Type 2 diabetes mellitus (T2DM) is the predominant form of diabetes, in which a reduction in blood glucose uptake is caused by impaired glucose transporter 4 (GLUT4) translocation to the plasma membrane in adipose and muscle cells. Antihyperglycemic drugs play a pivotal role in ameliorating diabetes symptoms but often are associated with side effects. Hence, novel antidiabetic compounds and nutraceutical candidates are urgently needed. Phytogenic therapy can support the prevention and amelioration of impaired glucose homeostasis. Using total internal reflection fluorescence microscopy (TIRFM), 772 plant extracts of an open-access plant extract library were screened for their GLUT4 translocation activation potential, resulting in 9% positive hits. Based on commercial interest and TIRFM assay-based GLUT4 translocation activation, some of these extracts were selected, and their blood glucose-reducing effects in ovo were investigated using a modified hen’s egg test (Gluc-HET). To identify the active plant part, some of the available candidate plants were prepared in-house from blossoms, leaves, stems, or roots and tested. Acacia catechu (catechu), Pulmonaria officinalis (lungwort), Mentha spicata (spearmint), and Saponaria officinalis (common soapwort) revealed their potentials as antidiabetic nutraceuticals, with common soapwort containing GLUT4 translocation-activating saponarin.