Total Dry Matter Losses Research Articles

Rehydrated corn grain silage with wet brewery residue and different inoculants

The objective was to evaluate the effects of including different proportions of Wet Brewery Residue (WBR) using inoculants on rehydrated ground corn silage quality. The experiment was conducted in a completely randomized design in a 4 x 3 factorial scheme with four replications. Four combinations of WBR and ground corn were evaluated to achieve 45 (DM45), 50 (DM50), 55 (DM55), and 65% (DM65) of dry matter (DM) in the homogenized material before siling, and three types of inoculation: without inoculant, with L. plantarum + P. acidylactici (Homo) and with L. buchneri (L. B). Ensiling was done in experimental PVC silos (±4.0kg) and stored for 180 days. The variables obtained were analyzed by the analysis of variance and regression procedures (P<0.05) using the R software. The percentage of real DM included in the treatments was 47%, 52%, 56%, and 66%. No impairment of the pH-reducing capacity of corn rehydrated with WBR was observed. Total dry matter losses were within the acceptable limit in silage with 52% DM (DM50), regardless of the type of inoculation. Gas losses were within the permissible limit only in the DM50 treatments with Homo inoculant and in the DM50 treatment without inoculation. Effluent losses were outside the tolerable limit in the treatment with 47% DM (DM45) in the presence of the inoculant LB. There was a significant interaction between the inoculant LB and the silages, with 47% (DM45) and 56% (DM55) DM for the Crude Protein (CP) levels. The ADF and NDF variables reduced linearly as a function of the increase in dry matter of the ensiled material, with a tendency for the lowest values to be found in treatments without inoculation. For all variables, an increase in energy levels (Non-Fibrous Carbohydrates, starch, Total Digestible Nutrients, and Net Energy gain) was observed with the increase in the DM content of the silage. It is concluded that silage with 52% DM (DM50) obtained the best results for fermentative losses. For bromatological and energetic characteristics, silage with 66% DM was the best, except for the CP variable, where 47% DM silage achieved superior results. In general, the addition of additives did not show any improvement in relation to treatments without inoculants.

Effects of brewer's spent yeast inclusion level and ensiling duration on fermentative, fungal load dynamics, and nutritional characteristics of brewer's spent yeast-based silage

ObjectiveThis study was conducted to evaluate the effect of brewer's spent yeast (BSY) inclusion level and ensiling duration (ED) on fermentative, fungal load dynamics, and nutritional characteristics of brewer's spent-yeast based silage. Materials and methodsTo prepare the silages materials, 4 BSY inclusion levels (0, 10, 20, and 30%) to replace BSG and 3 ED (2,4 and 6 weeks) were arranged in 4 × 3 factorial combination using a completely randomized design (CRD) in 5 replications. The ratio of brewery spent grain (BSG) to wheat bran (WB) used majorly as protein and energy sources, respectively was 30:69 with a 1% salt addition. Parameters measured include observation for surface spoilage, yeast and mold colony count, silage temperature, pH, total dry matter loss (TDML), major proximate, detergent fractions and permanganate lignin, in-vitro organic matter digestibility (IVOMD) and estimated metabolizable energy (EME) values. ResultsThe study revealed that at any BSY inclusion level and ED, extensive mold growths and discolorations were not observed. However, slightly higher values of 6.5, 5.7, and 12.2 colonies forming unit (CFU)/g DM yeast, mold, and total fungal counts (TFC), respectively were recorded only at the 6 weeks of the fermentation period with 30% BSY inclusion level. Brewer's spent yeast inclusion level and ED had a significant (P < 0.05) effect on silage temperature (mean = 18.05 °C) and pH (mean = 4.16). Among proximate and detergent values, crude protein (mean CP g/kg DM = 204.5), neutral detergent fiber (mean NDF g/kg DM = 552.9), and acid detergent fiber (mean ADF g/kg DM = 115.9) responded significantly (P < 0.05) to both BSY inclusion levels and ED. ConclusionAmong nutritional quality, CP, IVOMD, and EME of silage samples were subjected to substantial improvements when silage masses were prepared from 20% BSY inclusion levels and when the same silage materials were allowed to ferment for four weeks. In addition, the lab-based experiment should be supported with additional silage quality parameters like volatile fatty acid content of the silage materials and supplementation of ruminant livestock under both on-station and on-farm conditions using either a pilot and/or target animals.

The Effects of Short-Time Delayed Sealing on Fermentation, Aerobic Stability and Chemical Composition on Maize Silages

Despite the efforts to improve the methodological standards of silage trials, many factors that can influence the results of lab-scale studies need to be better understood. This study aimed to determine the effects of short-time delayed sealing and inoculation with a blend of Lentilactobacillus buchneri and Lactiplantibacillus plantarum on fermentation, aerobic stability, and chemical composition of silages. Whole-crop maize was treated with or without a commercial inoculant and ensiled (29.3% dry matter) for 55 days in 8.8 L PVC silos that were sealed immediately (up to 30 min delay) or after a delay (90, 150, or 210 min between chopping and sealing) with five replicates each. The increasing air exposure before sealing increased fermentation losses and reduced silage nutritional value. Crude protein and ash were significantly affected by inoculation, with control treatments showing higher ash and lower protein values. Lignin, neutral detergent fiber, and acid detergent fiber were only affected by the delay period. The longer the sealing delay, the higher the gas production, and the lower the starch values and lactic acid content observed in samples. Inoculation was inefficient in reducing total dry matter losses, but it increased aerobic stability, acetic acid, and ethanol contents of silages and reduced effluent loss. Control silages had higher total dry matter loss during the aerobic exposure than inoculated silages. The results confirmed that the delay periods tested were long enough to negatively interfere with the chemical composition of silages, especially the fibrous fraction content.

Re-ensiling and microbial inoculant use effects on the quality of maize silages exposed to air

Re-ensiling has increased worldwide due to the increase in marketing of silage between farms. However, litlle is known about the aerobic deterioration and microbial inoculants effect in this process. The aim of this study was to determine the re-ensiling and microbial inoculant use effects on the maize silage quality. Experimental treatments included maize silage exposed to air for zero or 18 h, with or without microbial inoculant use containing a mixture of Lactobacillus plantarum and Propionibacterium acidipropionici. The forage was ensiled in 20 plastic buckets (20 liters capacity) with five repetitions per treatment. The silos were opened after 116 days and the chemical composition, in vitro dry matter digestibility (IVDMD), fermentative parameters, microorganism counts, total dry matter (DM) losses and aerobic stability of silage were evaluated. Re-ensiling reduced the non-fibrous carbohydrates content by 14.8%, whereas it increased the neutral detergent fiber content by 6%. The IVDMD was reduced by 6.1% in re-ensiled silages. In addition, re-ensiling increased the losses due to gases, effluents, and total DM. Lower lactic acid content and higher acetic acid content in re-ensiled maize silages were also observed. However, IVDMD increased by 4.6% in inoculated silages. Re-ensiling reduced the nutritive value and IVDMD of maize silages and should be avoided in production systems. The microbial inoculant use was not effective in improving the re-ensiled silage quality, which does not justify its use in these conditions. Farms should avoid purchasing maize silage due to reduction in nutritional value in the re-ensiling process. However, in some cases where farms need to purchase silage for feeding planning, the time between silo opening and re-ensiling should be as short as possible to reduce nutrient loss. Furthermore, in this situation the inoculant use does not improve silage conservation, which makes its use unnecessary.

Effects of different moist orange pulp inclusions in the corn grain rehydration for silage production on chemical composition, fermentation, aerobic stability, microbiological profile, and losses.

This study evaluated the effects of different moist orange pulp (MOP) inclusions in corn grain rehydration for silage production as a strategy to store and use MOP and whether these inclusions result in adequate fermentation and aerobic stability (AE) and acceptable losses. Ground corn grain and MOP were weighed separately and mixed to obtain MOP inclusions of 21%, 34%, or 42%. The control treatment was obtained with corn rehydrated with distilled water and MOP inclusion of 0%, with five laboratory silos (15-L buckets) per treatment. Acid detergent fiber, acid detergent insoluble protein, acid detergent lignin, lactic acid, acetic acid, and ethanol contents increased linearly with increasing MOP inclusion, whereas starch, in vitro dry matter (DM) digestibility and butyric acid contents and pH decreased linearly. NH3 -N/TN content reduced quadratically and was minimal with 8.34 g/kg DM at 14% MOP inclusion. Total DM losses increased quadratically with maximal losses of 4.26% DM at 25% MOP inclusion. AE reduced by 2.8h for each 1% increase in MOP inclusion. Rehydration of corn grain with MOP results in an adequate fermentation process. The inclusion of 34% MOP was the best because DM losses were lower and AE was not drastically reduced.

Effect of Geobacillus toebii GT-02 addition on composition transformations and microbial community during thermophilic fermentation of bean dregs

Bean dregs can be prepared into organic fertilizer by microbial fermentation. Geobacillus toebii GT-02, which has promoting effect on bean dregs fermentation, was isolated from horse dung and it grows within a range of 40–75 °C and pH 6.50–9.50. The effectiveness of GT-02 addition on composition transformations and the microbial community in bean dregs thermophilic fermentation at 70 °C for 5 days was investigated (T1). Fermentation of bean dregs without GT-02 served as control (CK). The results showed that T1 (the germination index (GI) = 95.06%) and CK (GI = 86.42%) reached maturity (defined by GI ≥ 85%) on day 3 and day 5, respectively. In addition, the total nitrogen loss of T1 (18.46%) on day 3 was lower than that in CK (24.12%). After thermophilic fermentation, the total organic carbon and dry matter loss of T1 (53.51% and 54.16%) was higher than that in CK (41.72% and 42.82%). The mean microbial number in T1 was 4.94 × 107 CFUs/g dry matter, which was 5.37 times higher than that in CK. 16S rDNA sequencing identified Bacillus, Geobacillus and Thermobacillus as dominant in CK, while Bacillus, Ammoniibacillus and Geobacillus were dominant in T1. A canonical correspondence analysis showed that Geobacillus and Ammoniibacillus were positively correlated with the GI. Thus, thermophilic fermentation with GT-02 can promote the maturity of bean dregs, which indicated the potential application value of GT-02 in thermophilic fermentation.

Nutritional value, total dry matter losses, effluent production and pollutant potential in Brachiaria brizantha cv. Paiaguás grass

ABSTRACT The objective of the present study was to evaluate losses, production and polluting potential of the effluent, nutritional value and aerobic stability of silages of Brachiaria brizantha cv. Paiaguás grass, in different particle sizes and compaction density in silage. Three theoretical particle sizes (TTP 5; 8 and 12mm) and three compaction densities (DC 550; 600 and 650kg/m3) were evaluated, distributed in a factorial design (3 x 3), with four repetitions. The highest volume of effluent was found in silages with higher compaction densities (600 and 650kg/m3) and lower TTP (5 and 8mm). The highest chemical oxygen demand and biochemical oxygen demand were registered in the treatment with TTP of 5mm and higher DC (600 and 650kg/m3). Greater in vitro digestibility of DM was verified in the silage chopped at 5 and 8mm. There was no break in aerobic stability for 216 hours. Silage with a low compaction density 550kg/m3 and processing with a theoretical particle size of 12mm reduces effluent losses. In general, the nutritional value of Paiaguás grass was not influenced by the treatments. Different particle sizes and compaction density did not change the aerobic stability of silages.

Inclusion of discarded banana in sugarcane silage decreases dry matter losses and improves its nutritional value

Background: Sugarcane silage (SCS) has often been characterized by large dry matter (DM) losses associated with reduction in soluble nutrients and increase in indigestible fiber. Objective: To evaluate the effect of including discarded fruits on the losses and nutritional value in SCS. Methods: A completely randomized design was used with five treatments andfive replications. Silageswere added with 15% (as-fed basis) papaya (Carica papaya) (SP), acerola (Malpighia glabra) (SA), banana (Musa sp.)(SB) or tomato (Solanum lycopersicum) (ST). The control treatment was composed only of SCS. Twenty-five (25-L) plastic buckets were used to make the experimental silos, which were opened on the 90th day after their closure. Data were analyzed by analysis of variance. Results: Gas losses and total DM losses were lower and DM recovery was higher in SB and SA than in the control (p&gt;0.05). However, there was treatment effect for lactic and acetic acids, ammonia nitrogen contents, lactic acid bacteria, and yeasts and mold counts (p&lt;0.05). Conclusion: The inclusion of 15% banana or acerola in SCS decreases losses and increases DM recovery. Furthermore, the inclusion of 15% banana improves the nutritional value of SCS.Keywords: additives, animal feeding, crop byproduct, fiber content, forage conservation, discard fruit. ResumenAntecedentes: El ensilaje de caña de azúcar (SCS) es frecuentemente caracterizado por grandes pérdidas de materia seca (DM) asociadas con reducciones en los nutrientes solubles y aumentos en la fibra indigestible. Objetivo: Evaluar el efecto de la inclusión de frutas de descarte sobre las perdidas y el valor nutricional del SCS. Métodos: Se utilizó un diseño completamente aleatorizado con cinco tratamientos y cinco repeticiones. Fueron adicionados a los ensilajes, 15 % (materia natural) de papaya (Carica papaya) (SP), acerola (Malpighia glabra) (SA), banano (Musa sp.) (SB) o tomate (Solanum lycopersicum) (ST). El control estuvo compuesto apenas por SCS. Veinticinco baldes de 25 L fueron usados para hacer los silos, los cuales se abrieron al día 90 posterior a su cierre. Los datos fueron analizados por análisis de varianza. Resultados: Las pérdidas de gases y de DM total fueron menores y la recuperación de DM fue mayor en SB y SA que en el grupo control (p&gt;0,05). Sin embargo, hubo efecto de tratamiento para los contenidos de ácidos láctico y acético, y nitrógeno amoniacal y recuento de bacterias ácido lácticas, levaduras y hongos (p&lt;0,05). Conclusiones: La inclusión de 15% de banano y acerola en SCS decreció las perdidas, y aumentó la recuperación de DM. Además, la inclusión de un 15% de banano mejoró el valor nutricional de SCS.Palabras clave: aditivos, alimentación animal, conservación de forraje, contenido de fibra, fruta de descarte, subproducto de cosecha. Resumo Antecedentes: A silagem de cana de açúcar (SCS) é frequentemente caracterizada por grandes perdas de matéria seca (DM) associadas com reduções nos nutrientessolúveis e aumento na fibra indigestível. Objetivo: Avaliar o efeito da inclusão de frutas de descarte sobre as perdas e o valor nutricional de SCS. Métodos: Um delineamento completamente casualizado foi utilizado, com cindo tratamentos e cinco repetições. As silagens foram adicionadas com 15% (matéria natural) de mamão (Carica papaya) (SP), acerola (Malpighia glabra) (SA), banana (Musa sp.) (SB) ou tomate (Solanum lycopersicum) (ST). O controle foi composto apenas por SCS. Vinte e cinco baldes de 25 L foram usados para fazer os silos, que foram abertos no 90º dia após o fechamento deles. Os dados foram analisados por meio de análise de variância. Resultados: As perdas por gases e de DM total foram menores e a recuperação de DM foi maior em SB e SA que no controle (p&gt;0,05). Contudo, houve efeito de tratamento para os conteúdos de ácidos lático e acético, e nitrogênio amoniacal e contagens de bactérias láticas, e leveduras e fungos (p&lt;0,05). Conclusões: Ainclusão de 15% de banana e acerola em SCS decresceu as perdas, e aumentou a recuperação de DM. Adicionalmente, a inclusão de 15% de banana melhorou o valor nutricional da SCS.Palavras-chave: aditivos, alimentação animal, conservação de foragem, conteúdo de fibra, subproduto da colheita, fruta descartada.

Chemical composition and fermentative losses of mixed sugarcane and pigeon pea silage

Adding legumes to sugarcane silage is a strategy used to improve silage quality and reduce losses. This study’s objective was to evaluate the chemical composition and fermentation profile of silages sugarcane and pigeon pea. A completely randomized design was used, with five treatments and four replications. The treatments consisted of sugarcane silage with increasing pigeon pea proportions (0, 25, 50, 75 and 100%). The forages were ensiled in experimental microsilos that remained closed for 60 days. Their chemical compositions were evaluated by determining the pH value and dry matter, crude protein, neutral detergent fiber, acid detergent fiber, hemicellulose, cellulose and lignin content. Fermentation profiles were evaluated by determining the effluent, gas, and total dry matter losses and dry matter recovery of the silage. Including pigeon pea in sugarcane silage decreases the hemicellulose content and increases the crude protein, acid detergent fiber and lignin content. Fermentation losses are reduced by adding pigeon pea to sugarcane silage with reduced effluent and gas losses and increased dry matter.

Compatibility of High-Moisture Storage for Biochemical Conversion of Corn Stover: Storage Performance at Laboratory and Field Scales.

Wet anaerobic storage of corn stover can provide a year-round supply of feedstock to biorefineries meanwhile serving an active management approach to reduce the risks associated with fire loss and microbial degradation. Wet logistics systems employ particle size reduction early in the supply chain through field-chopping which removes the dependency on drying corn stover prior to baling, expands the harvest window, and diminishes the biorefinery size reduction requirements. Over two harvest years, in-field forage chopping was capable of reducing over 60% of the corn stover to a particle size of 6 mm or less. Aerobic and anaerobic storage methods were evaluated for wet corn stover in 100 L laboratory reactors. Of the methods evaluated, traditional ensiling resulted in <6% total solid dry matter loss (DML), about five times less than the aerobic storage process and slightly less than half that of the anaerobic modified-Ritter pile method. To further demonstrate the effectiveness of the anaerobic storage, a field demonstration was completed with 272 dry tonnes of corn stover; DML averaged <5% after 6 months. Assessment of sugar release as a result of dilute acid or dilute alkaline pretreatment and subsequent enzymatic hydrolysis suggested that when anaerobic conditions were maintained in storage, sugar release was either similar to or greater than as-harvested material depending on the pretreatment chemistry used. This study demonstrates that wet logistics systems offer practical benefits for commercial corn stover supply, including particle size reduction during harvest, stability in storage, and compatibility with biochemical conversion of carbohydrates for biofuel production. Evaluation of the operational efficiencies and costs is suggested to quantify the potential benefits of a fully-wet biomass supply system to a commercial biorefinery.

Impact of raking and baling patterns on alfalfa hay dry matter and quality losses.

A field study was conducted to investigate the impact of different patterns of raking and baling operations on the dry matter (DM) and quality losses of the produced alfalfa (Medicago sativa) hay. The experimental work was carried out on a 50 ha center pivot irrigated alfalfa field in a commercial farm located in the Eastern Region of Saudi Arabia. Raking operation was performed following two patterns corresponding to the direction of mowing operation, namely, Raking-I in the same direction of mowing (Mowing→ and Raking→) and Raking-II opposite to the direction of mowing (Mowing→ and Raking←). The baling operation; however, was performed following four patterns corresponding to the directions of both mowing and raking operations, namely, Baling-I (Mowing→, Raking→ and Baling→), Baling-II (Mowing→, Raking→ and Baling←), Baling-III (Mowing→, Raking← and Baling→) and Baling-IV (Mowing→, Raking← and Baling←). Results showed that cumulative DM losses in alfalfa hay yield of 30.93% occurred during the harvesting operations. Out of which, raking induced the most DM losses of 985.22 kg ha−1 (59.66% of the total DM losses and 17.35% of the total hay yield). However, the least DM losses were observed during the baling operation and were estimated at 175.81 kg ha−1 (10.22% of the total DM losses and 3.10% of the total hay yield). Raking opposite to the direction of mowing reduced the DM losses by 130.17 kg ha−1 (7.88% of the total DM losses and 2.29% of the total hay yield) compared to that with the direction of mowing. Results also indicated that out of the 21.04% losses in the total crude protein (CP) content of the produced alfalfa hay, 10.91% occurred during the raking operation. However, the baling operation induced the least amount of CP losses (only 2.32% of the total CP). Overall, the best results in terms of alfalfa hay quality and quantity losses were achieved with Baling-III, where the lowest DM losses (2.01% of the total hay yield) and the lowest CP losses (1.44% of the total CP) were recorded.

Inclusion of crushed corn grains and citrus pulp improves the quality of soybean silage

We aimed to evaluate the effect of the inclusion of corn and citrus pulp as additives in soybean silage made in plastic (PVC) tubes. The experimental design was completely randomized, with a 2x4 factorial arrangement consisting of two additive groups (corn and citrus pulp) and four inclusion levels (no inclusion, 7, 14 and 21%). The experiment was conducted at the Forage Sector of the Lageado Experimental Farm, Faculty of Veterinary Medicine and Animal Science, UNESP, Botucatu, SP, and chemical composition analysis was carried out at the Laboratory of Bromatology. The soybean variety used was BMX Potencia RR. Mechanical harvest occurred at the R7 phenological stage, at a height of 15 cm, using a harvester equipped with a two-row platform. The material was chopped into medium particles of 3 to 6 mm. After 45 days, the silages were analyzed for dry matter, crude protein (CP), total digestible nutrients, pH, ethereal extract, neutral detergent fiber, acid detergent fiber, lignin, total dry matter loss, and total carbohydrates (CHOS). The inclusion of corn (21%) and citrus pulp (14 and 21%) reduced CP values (P<0.05). Control silage contained less CHOS (P<0.05). The inclusion of corn meal is better than citrus pulp to improve the values of soybean silage.

Nutritional profiles of three genotypes of sugarcane silage associated with calcium oxide

AbstractThe objective of this study was to evaluate, based on chemical composition and in vitro dry matter (DM) digestibility, silages of different sugarcane genotypes after exposure to different doses of calcium oxide (CaO) and to identify that most appropriate dose for use in ruminant feed. The experiment was conducted using a completely randomized 3 × 4 factorial arrangement with three sugarcane genotypes (‘IAC‐862480’, ‘SP‐791011’ and ‘CTC‐3’) and four levels of the additive CaO (0, 15, 30 and 45 g kg−1). A quadratic effect was observed (P &lt; 0.05) for DM content in the silages of genotypes ‘SP‐791011’ and ‘CTC‐3’. The organic matter content of genotypes ‘SP‐791011’ and ‘CTC‐3’ showed a negative linear effect that was associated with the addition of CaO, which promoted an increase in the mineral matter (MM) content in the silages. There was no effect (P &gt; 0.05) of genotype or an interaction effect between genotype and CaO level on crude protein content in the silages. There was an interaction effect (P &lt; 0.05) between genotype and CaO level on the level of neutral detergent fiber in the studied silages and the development of this interaction revealed a linear decrease in neutral detergent fiber in genotype IAC‐86280 and a quadratic effect (P &lt; 0.05) for genotypes ‘SP‐791011’ and ‘CTC‐3’. Potentially degradable DM (pdDM) values showed a positive quadratic function with maxima at 34.8 g kg−1 CaO. The results obtained for potentially degradable neutral detergent fiber (pdNDF) showed that there was a negative linear effect for genotype ‘SP‐791011’ and a quadratic effect with the maximum critical point for genotypes ‘IAC‐862480’ and ‘CTC‐3’. Total DM losses decreased with levels of CaO. All genotypes evaluated showed potential for silage production. The addition of CaO in the ensiling of sugarcane at up to 45 g kg−1 reduces gas and effluent losses and increases the DM recovery of the silages.

Effects of Two DifferentPozolePreparation Processes on Quality Variables and Pasting Properties of Processed Maize Grain

The effects of two differentpozolepreparation processes, traditional (TP) and industrial (IP), on quality variables, chemical composition, and pasting properties of processed grain of nine maize landraces were evaluated. Nixtamalization and steeping time in TP (~15 h) allowed more water absorption resulting in higher moisture content as well as softer debranned nixtamal relative to the debranned nixtamal produced by IP (52 min). Steeping in TP and bleaching in IP increased the pasting temperature, peak viscosity, and time to peak viscosity of maize starch. Flowering time was shorter in IP (&lt;120 min) than in TP (&gt;120 min) and was significantly affected by the hardness of debranned nixtamal and bleached precooked grains. Total dry matter loss was higher in IP (&gt;10.5%) than in TP (&lt;5.0%), mainly due to the complete elimination of pedicel and pericarp by the Ca(OH)2+ NaOH solution during cooking. Soft grains, with low test weight, a high proportion of floury endosperm, and high peak viscosity, are required to obtain higher yield of bleached precooked grains and soft flowered grains in both processes.

Impact of Temperature, Moisture, and Storage Duration on the Chemical Composition of Switchgrass, Corn Stover, and Sweet Sorghum Bagasse

Packaged samples of three bioenergy feedstocks—sweet sorghum, corn stover, and switchgrass—were stored indoors under aerobic conditions to determine the change in chemical composition, track loss of specific chemical constituents, and determine the impact of dry matter loss on saccharification yields with and without pretreatment. Biomass samples were stored under controlled temperature conditions at varying stable biomass moisture contents (10–34 % w/w), temperatures (8–35 °C), and durations up to 16 weeks. Total dry matter losses were measured and sample compositions determined to develop a material balance of storage losses for free sugars, glucan, xylan, and lignin. Maximal losses (24–30 %) were observed for sweet sorghum bagasse at high moisture, while minimal losses (0 %) were observed with switchgrass below the highest tested moisture. Sorghum losses predominantly consisted of free sugars, while switchgrass and stover losses consisted of structural carbohydrates—cellulose and hemicellulose. The mass fraction (% dry weight) of lignin was observed to increase in samples showing dry matter loss, as a result of carbohydrate consumption.

Critical Period for Weed Control of Chickpea in a Semi-Arid Region

Field studies were conducted to determine the critical period of weed control in chickpea (Cicer arietinum L.) cv. ‘Jam’. The treatments consisted of two different periods of weed interference and weed control. Weed interference and weed-free treatments were set up after the crop emergence. Beginning of CPWC was determined by allowing weeds to compete or were kept weed-free at 2 weekly intervals for 2 (weed-free control) to 12 weeks after emergence (WAE). The Gompertz and logistic equations were fitted to relative yield and total dry matter representing the critical weed-free and the critical time of weed removal, respectively. Results indicated that Crop yield, total dry matter, 100 seed weight, number of pod in plant and number of seed in plant declined steadily as the duration of weed competition increased, indicating weed infested conditions for the entire growing season led to 76.4-85.8% and 78.5-85.7% reduction in chickpea dry matter and seed yield compared with full-season weed-free treatments. Also, the major weeds in experiment were Stachys byzantine, Tragopogon dubius, Gypsophila pilosa and Euphorbia helioscpia. To prevent >10% yield and total dry matter loss, the maximum time weeds could be allowed to grow after crop emergence were 43 and 36 DAE respectively and Also, critical period for weed control at 5 % yield and total dry matter loss was 36-60 DAE and 26-71 DAE. But critical period at 2.5 % yield and total dry matter loss was widespreader than other loss level. These results suggested that weed control upgraded all of agronomical traits of chickpea especially seed yield and to minimizing loss level of yield removal weeds must be done at 19-80 DAE.

Influence of Airflow on Laboratory Storage of High Moisture Corn Stover

Storing high moisture biomass for bioenergy use is a reality in many areas of the country where wet harvest conditions and environmental factors prevent dry storage from being feasible. Aerobic storage of high moisture biomass leads to microbial degradation and self-heating, but oxygen limitation can aid in material preservation. To understand the influence of oxygen presence on high moisture biomass (50 %, wet basis), three airflow rates were tested on corn stover stored in laboratory reactors. Temperature, carbon dioxide production, dry matter loss, chemical composition, fungal abundance, pH, and organic acids were used to monitor the effects of airflow on storage conditions. The results of this work indicate that oxygen availability impacts both the duration of self-heating and the severity of dry matter loss. High airflow systems experienced the greatest initial rates of loss but a shortened microbially active period that limited total dry matter loss (19 %). Intermediate airflow had improved preservation in short-term storage compared to high airflow systems but accumulated the greatest dry matter loss over time (up to 27 %) as a result of an extended microbially active period. Low airflow systems displayed the best performance with the lowest rates of loss and total loss (10 %) in storage at 50 days. Total structural sugar levels of the stored material were preserved, although glucan enrichment and xylan loss were documented in the high and intermediate flow conditions. By understanding the role of oxygen availability on biomass storage performance, the requirements for high moisture storage solutions may begin to be experimentally defined.

Evaluation of sugarcane laboratory ensiling and analysis techniques

The objective was to evaluate the effects of laboratory-silo type and method of silage extract production, respectively, on sugarcane silage fermentation and recovery of fermentation products. Sugarcane was mechanically harvested and ensiled in three different types of laboratory silos (five replicates): 9.7 × 30 cm PVC tubes with tight lids, equipped or unequipped with Bunsen valves, and 20 L plastic buckets with tight lids and Bunsen valves. Three methods were used to produce silage extracts for pH, ethanol, acetic and lactic acids determination: extraction of silage juice by a hydraulic press and production of water extracts using a stomacher or a blender. Total dry matter loss (231 g/kg DM) was not affected by silo type. No interactions between silo type and method of silage extract production were observed for ethanol and organic acids contents in the silages. Interaction between silo type and method of silage extract preparation was detected for pH. Silo type affected ethanol content but did not affect lactic and acetic acids concentration in the silages. Dry matter, crude protein, neutral detergent fiber and ash were not affected by silo type. The method used to produce silage extracts affected the recovery of all fermentation products analyzed in the silages. Recovery of ethanol and acetic acid was higher when silage extracts were produced using a blender. For lactic acid recovery, the hydraulic press method was superior to the other two methods. Silage fermentation pattern is not affected by silo type, but the method used to produce silage extracts and some characteristics of silos affect the recovery of volatile fermentation products.

Silagem de milho ou de cana-de-açúcar com Lactobacillus buchneri exclusivamente ou em associação com L. plantarum

O objetivo deste trabalho foi avaliar o efeito de Lactobacillus buchneri aplicado exclusivamente ou em combinação com L. plantarum no perfil fermentativo, na estabilidade aeróbia e no valor nutritivo de silagens de milho e de cana-de-açúcar. O delineamento experimental inteiramente casualizado foi utilizado com quatro repetições. Os tratamentos de silagem de milho foram: controle, sem adição de lactobacilos; 1x10(5) ufc g-1 de L. buchneri; e 1x10(5) ufc g-1 de L. buchneri e L. plantarum. Na silagem de cana-de-açúcar, os tratamentos foram: controle; e adição de 1x10(5) ufc g-1 de L. buchneri. As silagens foram armazenadas por 150 dias. O tratamento das silagens de milho não afetou a maioria das variáveis relacionadas ao valor nutritivo, às características fermentativas, aos perfis microbiológicos, às perdas e à estabilidade aeróbia. Nas silagens de cana-de-açúcar, o tratamento com L. buchneri apresentou maior teor de matéria seca, sem apresentar diferenças para as variáveis de valor nutritivo. Além disso, foram observados outros resultados típicos da adição de L. buchneri: menor perda total de matéria seca e menores perdas devidas à produção de gases. A aplicação exclusiva de L. buchneri ou em associação a L. plantarum não altera a qualidade e a eficiência de conservação das silagens de milho. Contudo, nas silagens de cana-de-açúcar, a aplicação exclusiva de L. buchneri reduz as perdas de conservação.

Capacity of ensilage of Jatropha curcas L. cake to degrade forbol esters

The objective of this study was to evaluate the capacity of the ensilage of Jatropha curcas L. expeller cake to reduce the phorbol esters and its effect on fermentative losses, by adding soluble carbohydrates or microbial inoculants. The design was completely randomized with four replications in a 3 × 2 factorial arrangement, with three sources of soluble carbohydrates (SC, control, 50 g sucrose/kg or 50 g crude glycerin/kg as fed) and two doses of microbial inoculants (MI, 0 or 5 × 105 ufc Lactobacillus plantarum + 3.33 × 105 ufc Propionibacterium per g as fed). Twenty-four mini-silos (982 cm3) of polyvinyl chloride were created and opened after 60 days of fermentation at room temperature. The pre-hydrated Jatropha curcas L. cake (282 g of water/kg) contained 0.424 mg of phorbol esters/g of dry matter. Ensiling reduced the phorbol esters in 47.4%, on average, regardless of the SC or MI. There was no interaction effect between SC and MI on effluent, gases or total dry matter losses. However, both losses were increased when SC were added, and it was higher with glycerin that than sucrose. The addition of MI reduced all fermentation losses. The process of ensiling, although partially to reduce the phorbol esters of pre-hydrated Jatropha curcas L. cake, is not indicated as a biodestoxification procedure.