Tooth Tip Research Articles

TVMS calculation model for gear tooth tip chipping failure with EHL

This paper proposes a calculation method for Time-Varying Mesh Stiffness (TVMS) in the presence of tooth tip chipping defects under elastohydrodynamic lubrication (EHL). A contact stiffness model for tooth tip chipping defects under EHL is established, and an analytical equation for the TVMS of chipping defects under EHL is derived. The torsional stiffness at the chipping defect under EHL is introduced, considering the influence of roughness at the chipping defect on the characteristics of the oil film and its stiffness. The effects of chipping defect size, torsional stiffness of the chipping defect under EHL, roughness, and oil film stiffness on TVMS are analyzed, providing methodological support for improving the calculation accuracy of gear TVMS.

Anchorage loss of the posterior teeth under different extraction patterns in maxillary and mandibular arches using clear aligner: a finite element study

BackgroundExtracting the premolars is an effective strategy for patients with bimaxillary dentoalveolar protrusion. Clear aligners (CAs) close the extraction spaces through shortening the length of aligners. The contraction force generated by the terminal of aligners makes the posterior teeth tip mesially, which is known as the roller coaster effect. This phenomenon is even worse in the 2nd premolar extraction cases. Posterior anchorage preparation is commonly used to protect the angulation of molars, taking the form of presetting distal tipping value. However, the distal tipping design aggravates the anchorage loss of anterior teeth simultaneously. This study aimed to explore the different anchorage loss of the posterior teeth when the 1st or 2nd premolars were extracted using CAs, respectively in maxillary and mandibular arches, further providing guidance for anchorage preparation design in clinical practice.MethodsTwo bimaxillary finite element models with different extraction patterns were established to simulate the anterior en-masse retraction process of the CAs. In Model 1, the maxillary and mandibular 1st premolars were extracted, while in Model 2, the 2nd premolars were extracted. Finite element analysis methods were utilized to analyze the tipping angle of the anterior and posterior teeth.ResultsCompared between two models, the anterior teeth exhibited a greater lingual inclination tendency and the posterior teeth exhibited a slighter mesial tipping tendency in Model 1 regarding individual tooth. The closer to the extraction spaces, the greater the tip, and the distal tipping tendency of the 1st premolars was more evident than the mesial tipping tendency of the 1st molars in Model 2. Compared between the maxillary and mandibular arches, the mesial tipping tendency of individual posterior tooth was more evident in the maxilla. In addition, the highest hydrostatic stress of the periodontal ligaments was concentrated on the cervical and apical parts directly adjacent to the extraction spaces, and it exhibited relatively uniform distribution in Model 1.ConclusionsThe individual posterior tooth showed the same mesial tipping direction but to different degree when the 1st or the 2nd premolars were extracted during clear aligner treatment. Presetting anchorage preparation design for the posterior teeth is essential to alleviate the roller coaster effect, especially in the 2nd premolar extraction cases. Furthermore, larger anchorage preparation value should be proposed for the maxillary posterior teeth.

Effect of tempering process on the structure and properties of M51/X32 bimetal band saw blade

Abstract The mechanical properties of band saw have a great influence on the cutting life. In this paper, through the systematic study of M51/X32 bimetallic band saw blade with different tempering temperatures and times, the metallography of the bimetallic band saw blade under different heat treatment conditions was analyzed. The mechanical properties of the bimetallic band saw blade under different conditions were tested. The results showed that the carbide in the metallography of the tooth tip was uniform and tended to be spherical when tempering at 600°C for five times. The mechanical properties such as hardness, tensile strength, and fatigue properties are well matched, which can extend the service life of bimetallic band saw blades and ensure the cutting quality.

Fault diagnosis of new type screw compressor of helium liquefier by vibration signal

A diagnostic method for screw compressor faults using vibration signals was introduced and applied to a new type of helium oil-injected screw compressor in the 80L/h helium liquefier. The study revealed that the destruction of the oil film due to impurity particles could lead to rotor rubbing and poor meshing, compromising the reliability of these compressors. Based on frequency-domain analysis, the major vibration occurred at the meshing frequency of screw rotors and a series of its harmonics. The vibration of the characteristic frequency of bearing parts also indicated that the bearing had slight wear in the early stage. The vibration waveform’s time domain diagram exhibited clear clipping, and the axis trajectory shew disorder, which were common characteristic of rotor rubbing. When compressing helium with low molecular weight, the meshing clearance, tooth tip clearance, and end clearance of the rotor were significantly lower than those of traditional refrigerants or air media. Additionally, the thermal gap caused by thermoelastic deformation was smaller due to the large adiabatic index of helium. Therefore, rubbing faults between rotors and between rotors and casing were more likely to occur. The article recommended establishing a vibration signal monitoring system, optimizing the design of helium screw rotor profiles, and setting up reliability standards for screw compressor operation, such as limiting the vibration speed to ≤ 8 mm/s. Additionally, attention should be given to cleaning gas pipelines in cryogenic engineering and monitoring compressor vibration and noise signals during operation to prevent rotor damage due to particle impurities.

Euler-angle norms for tooth rotation, torque and tip.

The aim of the current study was to develop and describe a new measuring system for the orientation of a tooth in a digitalized cast of a jaw and provide new angular values for the rotation, torque and tip of maxillary and mandibular teeth. This retrospective cross-sectional study involved the utilization of a sub-group of extrinsic Euler-angles to derive optimal norm values per tooth in three different planes of orientation ('rotation', 'torque' and 'tip') by evaluating the digital representations of the teeth derived from a database containing over 17,500 patients. The process involved the entry of the .stl files of the jaw pairs into a fully automated software system (Smyl:Ai, Ulm, Germany) whereupon jaw alignment, teeth segmentation, landmark identification and visual validation of input files was conducted prior to calculation of the norm values for the three different planes of orientation. The digital scans in stereolithography (.STL)-file format of the upper and lower dentitions of 1914 individuals with optimal occlusion were chosen and evaluated. New mean (standard deviation) angular values were determined for the rotation, torque and tip of maxillary and mandibular teeth. The findings facilitate the reappraisal of rotation, torque and tip values currently acceptable as ideal. They will inform anthropologists and dental researchers about occlusion and alignment in orthodontic and non-orthodontic patients and provide baseline data for future studies. The methodology will also enable the evaluation of large numbers of data in relatively short timeframes.

Initiation and evolution of interference wear and pitting for spur gears considering the concurrent effects of meshing impact and mixed lubrication

Extended tooth contact (ETC) leads to specific load paths, introduces periodic overload and lubrication degeneration. These disadvantages cause specific interference wear and pitting. This work proposes a wear-pitting prediction model incorporating ETC, dynamic motion, and mixed EHL to investigate coupling relations between these factors. The model predicts a MI-induced wear-pitting competition phenomenon, indicating that when the film load capacity is improved, an additional pitting streak emerges at 1.2 mm from the pinion tooth tip while the maximum wear depth decreases from 32.9 µm to 10.2 µm. Two endurance experiments under different working conditions are performed on the FZG test rig. The predicted wear distribution and pitting areas are consistent with the tested results.

Elastohydrodynamic lubrication analysis and temperature field simulation of gear system

Abstract The gearbox is one of the key components in the aero engine. In the process of high-speed operation, the internal temperature of the gearbox rises significantly, which seriously affects the service performance of transmission equipment. Based on the meshing principle and Herz contact theory, the basic meshing parameters are analyzed, and the comprehensive friction coefficient and heat flux are solved. According to the principle of convective heat transfer in a rotating disc and the frictional heat diffusion model, the CHTC (convective heat transfer coefficient) is analyzed. The FE model of the gear system is built based on ANSYS software, and the temperature distribution is analyzed by loading thermal boundary conditions with the APDL program. The calculation results indicate that the middle of the tooth tip or root of the gear has the maximum temperature. The research provides some reference values for the calculation method of the temperature field of the gear system under elastohydrodynamic lubrication.

Iron-coated Komodo dragon teeth and the complex dental enamel of carnivorous reptiles

Komodo dragons (Varanus komodoensis) are the largest extant predatory lizards and their ziphodont (serrated, curved and blade-shaped) teeth make them valuable analogues for studying tooth structure, function and comparing with extinct ziphodont taxa, such as theropod dinosaurs. Like other ziphodont reptiles, V. komodoensis teeth possess only a thin coating of enamel that is nevertheless able to cope with the demands of their puncture–pull feeding. Using advanced chemical and structural imaging, we reveal that V. komodoensis teeth possess a unique adaptation for maintaining their cutting edges: orange, iron-enriched coatings on their tooth serrations and tips. Comparisons with other extant varanids and crocodylians revealed that iron sequestration is probably widespread in reptile enamels but it is most striking in V. komodoensis and closely related ziphodont species, suggesting a crucial role in supporting serrated teeth. Unfortunately, fossilization confounds our ability to consistently detect similar iron coatings in fossil teeth, including those of ziphodont dinosaurs. However, unlike V. komodoensis, some theropods possessed specialized enamel along their tooth serrations, resembling the wavy enamel found in herbivorous hadrosaurid dinosaurs. These discoveries illustrate unexpected and disparate specializations for maintaining ziphodont teeth in predatory reptiles.

Evaluation of Mean Apical Sealing Ability of Bio Ceramic and AH Plus (Dentsply Sirona) Sealer in Single Rooted Teeth: An In Vitro Study

A good seal is essential to prevent bacteria from re-entering the canal. Sealers can significantly impact the success of the treatment. Understanding which sealant works better can help dentists improve the outcome of root canal treatments. Objective: To compare mean apical sealing ability of bioceramic sealer and AH plus sealer in single rooted tooth. Methods: Extracted single-rooted teeth were divided into two groups and sealed with either bioceramic or AH plus sealer. After soaking in dye solution, the depth of dye penetration was measured to assess leakage. Results: Bioceramic sealer showed significantly better apical sealing ability (mean 5.43 mm) compared to AH plus (mean 8.55 mm), suggesting it may be a more effective choice for preventing future problems after root canal treatment. Conclusions: The study concluded that bioceramic sealer is superior to AH plus in sealing the tips of single-rooted teeth. This finding can help dentists choose the most effective sealant for their patients, potentially reducing the chance of treatment failure.

A new species of Chrysobrycon Weitzman & Menezes, 1998 (Characiformes, Characidae, Stevardiinae) with remarkable sexually dimorphic pigmentation from the upper Río Vaupés basin, Colombian Amazon, with taxonomic key

This study describes Chrysobrycon calamar, a new stevardiine fish from the upper Río Vaupés basin in Colombia. The new species differs from its congeners by the following combined characters: adult males have a dark vertical blotch on the abdominal flanks that is confined to a small area immediately dorsal to the urogenital region and anterior to the third anal-fin ray; adult males with a well-developed vertically humeral blotch, numerous tiny bony hooks on nearly all the upper lobe caudal-fin rays (except C. guahibo, C. hesperus, and C. mojicai), and bony hooks on nearly all branched anal-fin rays (except C. hesperus); the number of vertebrae (43 vs. 38–42); an elongated maxillary anterior process, representing 40% or more of the total length of the bone (vs. with a shorter maxillary anterior process, representing less than 40% of that length); and the posterior portion of the maxilla not reaching the vertical through the anterior border of the eye when the mouth is closed (except from C. yoliae). Additionally, C. calamar differs from C. mojicai by the number of maxillary teeth (2–4 vs. 9–17) and shape of the distal tips of most maxillary teeth (straight along their lengths vs. lateroventrally curved). Remarks on the interspecific color variation associated with sexual dimorphism and other characteristics of the genus are provided. A key to the species of Chrysobrycon is presented. The discovery of C. calamar is a key advance in the understanding of fish biodiversity associated with endemism-rich regions that could be explored after the guerrilla demobilized in Colombia.

Dr. Sohel Khan's prechopper and prechopping technique.

The quest of every dedicated phaco surgeon is to develop skills to emulsify all forms of hard nuclei efficiently with minimal damage to the endothelium and reducing the risk of wound burn. Obtaining a pristine cornea the very next day in a hard cataract is a dream far from reality. Prechop means nuclear division without the use of phaco energy. In this article, we describe a prechopping technique using a new sickle-shaped (saber tooth curvature and tip) novel prechopper that has a slender, sleek, and elegant design well suited for nuclear disassembly. The novel prechopper has proved to be a wonder device for hard, soft, white, posterior polar, and exfoliation cataracts. All maneuvers of prechop are performed in the bag away from the endothelium to be easily emulsified, subsequently making phacoemulsification easier, faster, and safer.

Flow resistance enhancement for the leakage decrease of labyrinth seals using teeth tip winglets

A novel flow resistance enhancement technology is proposed to decrease the leakage flow for labyrinth seals adopting teeth tip winglets (TTW). The specially designed TTW is utilized to double the throttling effect at each teeth tip. In addition, the annular slots on the TTW can also generate teeth tip vertexes. These vertexes disrupt the direction of teeth tip leakage flow, enhancing the local flow resistance. To validate this concept, a three-dimension computational fluid dynamic model (CFD) is established. The flow field and leakage performance of the seal with TTWs are calculated with compassion to the baseline seal. Results show that the TTW seals increase flow resistance at the teeth tips, resulting in an extra dissipation effect. As a result, the maximum leakage decrease ratio reaches up to 15.1%

Mesh Characteristic Analysis of Spiral Bevel Gear Pairs Considering Assembly Errors and Tooth Tip Chipping Faults

Due to machining errors, location inaccuracies, human error, and various other factors, it is challenging to avoid assembly errors during the production of spiral bevel gears (SBGs). When SBG assembly errors occur, it can cause the appearance of edge contact and may even lead to severe tooth tip chipping. In this study, we propose an improved method based on loaded tooth contact analysis (LTCA) to examine mesh characteristics, including time-varying mesh stiffness (TVMS), unloaded transmission error, and contact stress. Furthermore, we explore the effects of assembly errors and tooth tip chipping. Moreover, it is observed that assembly errors can alter the contact area of SBGs and potentially reduce the peak-to-peak value of TVMS. Additionally, the occurrence of tooth tip chipping decreases TVMS within the chipping region, lowers transmission error, and increases maximum contact stress. Notably, when assembly errors are present, the reduction in TVMS due to tooth tip chipping exceeds that of a properly assembled SBG pair.

Evaluation Of The Frequency, Localization And Relationship Of Maxillary Sinus Pathologies With Dental Pathologies By Cone Beam Computed Tomography (CBCT)

Background: The proximity of the root tips of the maxillary posterior teeth to the maxillary sinus causes odontogenic infection to become a potential source of maxillary sinusitis. This study aims to evaluate the relationship between dental pathologies and maxillary sinus abnormalities using cone beam computed tomography (CBCT). Material and Method: In this study, 300 patients who applied to our clinic for any reason 600 maxillary sinus cone beam computed tomography images of the patient were analyzed retrospectively. Maxillary sinus diseases and dental pathologies categoized among themselves. Results: The age of all patients ranged between 18 and 77 years, with a mean age of 41.38 (±14.39) years. No pathology was detected in 359 (59.8%) of the maxillary sinuses examined which were considered healthy sinuses. The most common pathology in 241 (40.2%) of the maxillary sinuses in the imaging area was mucosal thickening (MT). A statistically significant relationship was detected between teeth with periapical lesions (PL) and MT (p<0.05). No statistically significant relationship was found between restorative applications, oro-antral fistula (OAF), periodontal bone loss (PBL), and maxillary sinusitis (MS) (p<0.05). Conclusion: Odontogenic infections and inflammatory events are the causes of maxillary sinus pathologies and may play a role in their formation. CBCT, maxillary posterior teeth and maxillary sinüs in demonstrating the relationship between and in the diagnosis of odontogenous sinus pathlogies is quite useful.

Multilevel Modeling Analysis of Odontogenic Risk Factors and Nasal Septum Deviation Associated with Maxillary Sinus Mucosal Thickening: A Cone-Beam Computed Tomography Study.

(1) Background: In this study, the impact of odontogenic risk factors with nasal septum deviation on maxillary sinus mucosal thickening was assessed using Cone-beam computed tomography CBCT. (2) Methods: A total of 328 maxillary sinus regions from 164 patients (85 males and 79 females) were examined. Images were interpreted by dental specialists and Otolaryngologists. Coronal and sagittal sections were examined to assess the proximity of the root tips of posterior maxillary teeth (RPMT) to the maxillary sinus. The periodontal bone loss for all maxillary posterior teeth was also assessed. Consequently, maxillary sinus mucosal thickening (MT) was further classified into three gradings. Multilevel modeling regression analysis was used due to the hierarchical structuring of the data. Four models were developed, a null model with no factors, a model with tooth-level factors (RPMT, PBL, tooth condition, and root length), a model with patient-level factors (gender and nasal septum deviation), and a model with combined patient- and tooth-level factors. Regression estimates (AOR) and 95% confidence intervals (CIs) of individual and tooth factors were calculated. (3) Results: Multilevel regression analysis showed that RPMT was significantly associated with MT of maxillary sinus (p < 0.001), where patients who had RPMT > 0 had higher odds of MT of maxillary sinus. Tooth condition was also found to be significantly associated with MT of maxillary sinus, where teeth with failed RCT (p < 0.001) and teeth with restorations (p < 0.008) had higher odds of MT of maxillary sinus (AOR = 2.87, 95%CI 1.65, 4.42, AOR = 1.64, 95%CI 1.14, 2.36, respectively). (4) Conclusions: In order to plan preoperative treatment for maxillary posterior teeth, it is important to assess the anatomical relationship between the sinus floor and the root tips of the maxillary posterior teeth. Additionally, we establish a better understanding of the clinician before surgical intervention is conducted.

Research on thermal deformation and clearances of oil-free twin screw compressor under cryogenic conditions

The oil-free twin screw compressors have obtained increasing attention in the field of boil off gas (BOG) recovery since they effectively reduce the power consumption and have higher reliability when recovering and boosting BOG. However, the thermal deformation of compressor under cryogenic operating conditions will lead to the change of clearance. The unidirectional thermal-fluid-solid coupling method is proposed in this paper to solve the problem and analyze the thermal deformation of compressor and the changes of each clearance caused by the deformation at different meshing angles in a meshing cycle. It is shown in the results that the deformation of twin screw compressor at low temperatures is a kind of cold shrinkage deformation. The combined effect of the deformation of various components has a significant influence on each clearance. Furthermore, it is reasonable to set the tooth tip clearance of the male rotor, suction end clearance and meshing gap as 0.3 mm, 1 mm and 0.3 mm respectively, which do not cause dangerous working conditions. Inappropriate clearance values lead to friction between parts in the local area. The simulated result of the dangerous friction area in twin screw compressor shows good agreement with the friction area in the compressor test. According to the simulation and test results, the tooth tip clearance of the female rotor is modified to 0.35 mm, and the discharge end clearance is adjusted to 0.1 mm. The results show that the modified compressor can working reliably. This study provides guidance for the design and processing of oil-free twin screw compressors employed in the situation of BOG recovery.

The development of wear characteristics of the picking spindle hook teeth based on the discrete element method

In this study, samples of worn spindle hook teeth were collected under different field working times to investigate their loss of ability to pick seed cotton owing to wear failure of the geometric structure. The wear characteristics of the surface of the hook teeth were tested and analyzed, and the development process of the wear region and the average value of the wear depth were obtained. This research established a wear process model for the surface of hook teeth. The results show that wear originates from the tip of the hook teeth, and a parallelogram-like wear region is gradually formed along the direction of the teeth edge. The size of the wear region and wear depth gradually decreased in the following order: hook teeth 1, hook teeth 2, and hook teeth 3. The relative errors of the front three hook teeth of simulated wear depth and wear depth were Δ1 = 2.55%, Δ2 = 1.43%, and Δ3 = 4.02%, respectively. Thus, the accuracy of the picking spindle hook teeth wear process model was verified. Accordingly, the failure process of hook teeth wear can be predicted, laying a foundation for the subsequent optimization design of the spindle picking hook teeth geometric structure.

Trade-off between torque ripple and vibration in an IPMSM by examining the temporal and spatial harmonics of flux density

Despite continuous effort to minimize torque ripple, the reduction of vibration has not been yet achieved due to the lack of link between these two performances. The difficulty of investigating the relationship stems from the fact that torque is solely influenced by tangential force whereas vibration is directly tied to radial force. In this paper, the correlation between torque ripple and vibration in an IPMSM (Interior Permanent Magnet Synchronous Motor) is established by examining the air-gap flux density in both radial and tangential directions. Its temporal and spatial harmonics are analyzed. A six-pole nine-slot IPMSM is used as a base configuration, and the air-gap flux density is varied by changing the height of a stator tooth tip. In the previous study, the same approach has been done to observe how to reduce torque ripple effectively. In this study, however, it is found that the trend of torque ripple is not the same as that of vibration with respect to the height of a pole tip, and the relation between the two is thoroughly observed and explained.

A novel twisted rotor blade suitable for high-speed turbomolecular pumps: Numerical modelling and structural optimisation

To meet the urgent need for a new design concept and solve the inaccuracy of existing performance prediction algorithms for high-speed turbomolecular pumps (TMPs), a new algorithm based on a novel twisted rotor blade is proposed. In this algorithm, the blade angle of the turbine rotor row progressively decreases from the root to the tip of the blade tooth. The feasibility and accuracy of the simulation algorithm were verified through experiments. The dependence of the simulation results on the number of simulated molecules was discussed. Both theoretical analysis and simulations confirmed the necessity of setting a twisted rotor blade in the turbine combined blade row. A comparative analysis on the performance of conventional straight-blade and twisted-blade structures based on the first-four stages of turbine combined blade rows of the F-63/55 TMP was conducted. The results indicated that the maximum pumping speed coefficient and maximum compression ratio of the optimised twisted-blade structure increased by 4.59% and 22.26%, respectively. This novel blade structure overcomes the limitations of the conventional straight-blade structure. Progressively decreasing the rotor blade angle from the root to the tip of the blade tooth is beneficial for improving the performance of TMPs. This study provides a new design concept and performance prediction algorithm for the structural optimisation of high-speed TMPs.

Is a blunt sword pointless? Tooth wear impacts puncture performance in Tasmanian devil canines.

As teeth wear, their shapes change and functional features can be dulled or lost, presumably making them less effective for feeding. However, we do not know the magnitude and effect of this wear. Using Tasmanian devil canines as a case study, we investigated the impact of wear on puncture in pointed teeth. We measured aspects of shape impacted by wear (tip sharpness, height and volume) in teeth of varying wear followed by 3D printing of real and theoretical forms to carry out physical puncture tests. Tooth wear acts in two ways: by blunting tooth tips, and decreasing height and volume, both of which impact performance. Sharper tips in unworn teeth decrease the force and energy required to puncture compared with blunter worn teeth, while taller unworn teeth provide the continuous energy necessary to propagate fracture relative to shorter worn teeth. These wear-modulated changes in shape necessitate more than twice the force to drive worn teeth into ductile food and decrease the likelihood of puncture success.