Heart Valve Tissue Engineering Research Articles

Abstract 15510: Generation of the Cardiac Valve Lineage From Human Pluripotent Stem Cells

Background: Heart valves are living structures whose sophisticated functions are mediated by a specialized population of valvular interstitial cells (VICs). Given their central role in valve homeostasis, VICs represent a promising cell population for studying valve diseases and developing novel therapies to treat them. Herein, we describe the generation of VIC-like cells from human pluripotent stem cells (hPSCs). Methods and Results: Using a previously established protocol, we first generated endocardial cells from cardiovascular mesoderm. Within this endocardial population, we identified a subset of cells — marked by the expression of PDGFRβ — that express valvular endocardial cell (VEC) markers and demonstrate VEC-like functional properties, namely the ability to generate calcium transients in response to ATP and the ability to undergo endothelial-to-mesenchymal transition (EndoMT). Through stage-specific manipulation of developmental signaling pathways, we established a protocol that promotes the development of VIC-like cells from these hPSC-derived VEC progenitors (Figure 1A). The cells thus generated transcriptionally matched primary human fetal VICs by scRNAseq. When embedded in a tissue-engineered scaffold, hPSC-VICs secreted collagen and glycosaminoglycans, and demonstrated compact tissue organization analogous to that of native valve leaflets (Figure 1B, C). Finally, we show that VICs generated from an hPSC line with a Noonan syndrome mutation displayed excessive endocardial cell proliferation, diminished EndoMT, and dysregulated pERK activity, recapitulating key aspects of the disease. Conclusions: Together, the findings presented in this report provide a reproducible method for the scaled generation of bona fide VICs from hPSCs. The generation of hPSC-VICs addresses an important gap in the field and provides a platform to study valvulogenesis and heart valve disease, as well as a novel avenue for heart valve tissue engineering.

Formulation and Evaluation of PVA/Gelatin/Carrageenan Inks for 3D Printing and Development of Tissue‐Engineered Heart Valves

AbstractCongenital and acquired valvular heart diseases (VHDs) are significant causes of mortality worldwide. With valve replacement being the primary solution for VHD, current options display shortcomings, including calcification, thrombogenicity, and hemodynamic alteration, leading to repetitive surgeries. Tissue engineering, however, has shown great potential for fabricating heart valves (HVs) with fewer complications. Here, a series of inks are developed, combining poly(vinyl alcohol), gelatin, and carrageenan for 3D printing of tissue‐engineered heart valves (TEHVs). The inks/hydrogels are investigated to characterize their physico‐chemical, morphological, mechanical, and rheological characteristics. In vitro and in vivo biocompatibility, immune response, hemolysis, and thrombogenicity of the inks/hydrogels are also evaluated. Moreover, in vitro hydrodynamics of the TEHVs under physiological conditions are reported. Inks demonstrate mechanical characteristics comparable to native leaflets. Subcutaneous implantation reveals that the hydrogels do not induce chronic inflammation and can undergo remodeling. In vitro hemocompatibility assessments of the hydrogels show minimal hemolysis with low thrombogenicity. Different sizes and types of HVs are successfully printed with high fidelity in the air. In vitro hydrodynamic assessment confirms that the TEHVs can withstand aortic conditions. Altogether, the 3D‐printed TEHVs can be a promising alternative for valve replacement to solve the problems associated with the current options.

Bio-Inspired Fiber Reinforcement for Aortic Valves: Scaffold Production Process and Characterization.

The application of tissue-engineered heart valves in the high-pressure circulatory system is still challenging. One possible solution is the development of biohybrid scaffolds with textile reinforcement to achieve improved mechanical properties. In this article, we present a manufacturing process of bio-inspired fiber reinforcement for an aortic valve scaffold. The reinforcement structure consists of polyvinylidene difluoride monofilament fibers that are biomimetically arranged by a novel winding process. The fibers were embedded and fixated into electrospun polycarbonate urethane on a cylindrical collector. The scaffold was characterized by biaxial tensile strength, bending stiffness, burst pressure and hemodynamically in a mock circulation system. The produced fiber-reinforced scaffold showed adequate acute mechanical and hemodynamic properties. The transvalvular pressure gradient was 3.02 ± 0.26 mmHg with an effective orifice area of 2.12 ± 0.22 cm2. The valves sustained aortic conditions, fulfilling the ISO-5840 standards. The fiber-reinforced scaffold failed in a circumferential direction at a stress of 461.64 ± 58.87 N/m and a strain of 49.43 ± 7.53%. These values were above the levels of tested native heart valve tissue. Overall, we demonstrated a novel manufacturing approach to develop a fiber-reinforced biomimetic scaffold for aortic heart valve tissue engineering. The characterization showed that this approach is promising for an in situ valve replacement.

Characterization of a Decellularized Sheep Pulmonary Heart Valves and Analysis of Their Capability as a Xenograft Initial Matrix Material in Heart Valve Tissue Engineering.

In order to overcome the disadvantages of existing treatments in heart valve tissue engineering, decellularization studies are carried out. The main purpose of decellularization is to eliminate the immunogenicity of biologically derived grafts and to obtain a scaffold that allows recellularization while preserving the natural tissue architecture. SD and SDS are detergent derivatives frequently used in decellularization studies. The aim of our study is to decellularize the pulmonary heart valves of young Merino sheep by using low-density SDS and SD detergents together, and then to perform their detailed characterization to determine whether they are suitable for clinical studies. Pulmonary heart valves of 4-6-month-old sheep were decellularized in detergent solution for 24 h. The amount of residual DNA was measured to determine the efficiency of decellularization. Then, the effect of decellularization on the ECM by histological staining was examined. In addition, the samples were visualized by SEM to determine the surface morphologies of the scaffolds. A uniaxial tensile test was performed to examine the effect of decellularization on biomechanical properties. In vitro stability of scaffolds decellularized by collagenase treatment was determined. In addition, the cytotoxic effect of scaffolds on 3T3 cells was examined by MTT assay. The results showed DNA removal of 94% and 98% from the decellularized leaflet and pulmonary wall portions after decellularization relative to the control group. No cell nuclei were found in histological staining and it was observed that the three-layer leaflet structure was preserved. As a result of the tensile test, it was determined that there was no statistically significant difference between the control and decellularized groups in the UTS and elasticity modulus, and the biomechanical properties did not change. It was also observed that decellularized sheep pulmonary heart valves had no cytotoxic effect. In conclusion, we suggest that the pulmonary valves of decellularized young Merino sheep can be used as an initial matrix in heart valve tissue engineering studies.

Abstract P1088: Biophysical Crowding Of In Vitro Culture Media Alters The Growth Rate And Collagen Production Of Cells Used For Seeding Tissue-Engineered Heart Valves

Introduction: Ideal tissue-engineered heart valves (TEHVs) for valve replacement in congenital heart disease patients would have durability and growth potential. Endothelial colony-forming cells (ECFCs) isolated from peripheral blood are an attractive source for pre-cellularizing TEHVs with a patient’s own cells, as they are isolated non-invasively and can transform into valve endothelial and interstitial phenotypes. ECFC limitations include slow proliferation and uncertain mechanisms to control extracellular matrix (ECM) production. In other cell types, culture media “crowded” with large macromolecules limits paracrine diffusion and augments both ECM production and cell growth. Hypothesis: As a novel study of biophysical crowding on ECFCs, we hypothesized that media crowded with macromolecules dextran sulfate or Ficoll-400 would enhance the growth rate and collagen production of ovine ECFCs. Methods: ECFC lines (CD31+, α-SMA+) from n=3 animals at passages 2, 3, or 7 were cultured in media with no crowder or either Ficoll-400 or dextran sulfate at four concentrations in three separate replicates (n=10, n=120, n=384). Deposited and suspended collagen was quantified. Immunocytochemical cell scoring was quantified for vWF, VEGFR-2, CD34, vimentin, and α-SMA markers. Results and Conclusions: Anionic dextran sulfate (DS) caused significant dose-dependent increases in media soluble collagen, despite significantly lowering cell counts. Crowding with DS significantly increased CD34 positivity, a marker for anti-angiogenic and quiescent ECFC populations. Conversely, neutral Ficoll-400 significantly increased cell counts but did not alter media collagen or CD34 positivity. Both crowder groups had altered cellular morphology but did not cause reproducible differences in positivity for endothelial markers vWF and VEGFR-2 or interstitial markers vimentin and α-SMA. In conclusion, biophysical crowding of ECFC media alters cell count and morphology, CD34 positivity, and collagen production, which may allow for fine-tuning of ECFC properties when seeding onto TEHVs. Future studies will address the different effects of neutral and negatively charged crowders and how crowders impact cellular phenotype and growth on valvular scaffolds.

Re-endothelialization of Decellularized Scaffolds With Endothelial Progenitor Cell Capturing Aptamer: A New Strategy for Tissue-Engineered Heart Valve.

Tissue-engineered heart valve (TEHV) is a promising alternative to current heart valve substitute. Decellularized porcine aortic heart valves (DAVs) are the most common scaffolds of TEHV. Hard to endothelialization is one of the disadvantages of DAVs. Therefore, we aimed to immobilize endothelial progenitor cell (EPC)-aptamer onto DAVs for accelerating endothelialization. In this study, three groups of scaffolds were constructed: DAVs, aptamer-immobilized DAVs (aptamer-DAVs), and glutaraldehyde crosslinked DAVs (GA-DAVs). The results of flow cytometry revealed that EPC-aptamer was specific to EPCs and was immobilized onto DAVs. Cells adhesion experiments demonstrated that EPCs adhered more tightly onto aptamer-DAVs group than other two groups of scaffolds. And cell proliferation assay indicated that EPCs seeded onto aptamer-DAVs group grew faster than DAVs group and GA-DAVs group. Moreover, dynamic capture experiment in flow conditions revealed that the number of EPCs captured by aptamer-DAVs group was more than other two groups. In conclusion, aptamer-DAVs could specifically promote adhesion and proliferation of EPCs and had ability to capture EPCs in simulated flow condition. This could promote re-endothelialization of scaffolds.

Biofunctionalized Decellularized Tissue-Engineered Heart Valve with Mesoporous Silica Nanoparticles for Controlled Release of VEGF and RunX2-siRNA against Calcification.

The goal of tissue-engineered heart valves (TEHV) is to replace normal heart valves and overcome the shortcomings of heart valve replacement commonly used in clinical practice. However, calcification of TEHV is the major bottleneck to break for both clinical workers and researchers. Endothelialization of TEHV plays a crucial role in delaying valve calcification by reducing platelet adhesion and covering the calcified spots. In the present study, we loaded RunX2-siRNA and VEGF into mesoporous silica nanoparticles and investigated the properties of anti-calcification and endothelialization in vitro. Then, the mesoporous silica nanoparticle was immobilized on the decellularized porcine aortic valve (DPAV) by layer self-assembly and investigated the anti-calcification and endothelialization. Our results demonstrated that the mesoporous silica nanoparticles delivery vehicle demonstrated good biocompatibility, and a stable release of RunX2-siRNA and VEGF. The hybrid decellularized valve exhibited a low hemolysis rate and promoted endothelial cell proliferation and adhesion while silencing RunX2 gene expression in valve interstitial cells, and the hybrid decellularized valve showed good mechanical properties. Finally, the in vivo experiment showed that the mesoporous silica nanoparticles delivery vehicle could enhance the endothelialization of the hybrid valve. In summary, we constructed a delivery system based on mesoporous silica to biofunctionalized TEHV scaffold for endothelialization and anti-calcification.

The Role of Poly-glycerol Sebacate/Gelatin Coating Layer on Biological Features and Calcification Rate of 3D Melt-Molded Antibacterial Scaffold for Heart Valve Tissue Engineering

The Role of Poly-glycerol Sebacate/Gelatin Coating Layer on Biological Features and Calcification Rate of 3D Melt-Molded Antibacterial Scaffold for Heart Valve Tissue Engineering

On-demand heart valve manufacturing using focused rotary jet spinning

On-demand heart valve manufacturing using focused rotary jet spinning

Reducing retraction in engineered tissues through design of sequential growth factor treatment

Heart valve disease is associated with high morbidity and mortality worldwide, resulting in hundreds of thousands of heart valve replacements each year. Tissue engineered heart valves (TEHVs) have the potential to overcome the major limitations of traditional replacement valves; however, leaflet retraction has led to the failure of TEHVs in preclinical studies. Sequentially varying growth factors over time has been utilized to promote maturation of engineered tissues and may be effective in reducing tissue retraction, yet it is difficult to predict the effects of such treatments due to complex interactions between the cells and the extracellular matrix (ECM), biochemical environment, and mechanical stimuli. We hypothesize that sequential treatments of fibroblast growth factor 2 (FGF-2) and transforming growth factor beta 1 (TGF-β1) can be used to minimize cell-generated tissue retraction by decreasing active cell contractile forces exerted on the ECM and by inducing the cells to increase the ECM stiffness. Using a custom culturing and monitoring system for 3D tissue constructs, we designed and tested various TGF-β1 and FGF-2 based growth factor treatments, and successfully reduced tissue retraction by 85% and increased the ECM elastic modulus by 260% compared to non-growth factor treated controls, without significantly increasing the contractile force. We also developed and verified a mathematical model to predict the effects of various temporal variations in growth factor treatments and analyzed relationships between tissue properties, the contractile forces, and retraction. These findings improve our understanding of growth factor-induced cell-ECM biomechanical interactions, which can inform the design of next generation TEHVs with reduced retraction. The mathematical models could also potentially be applied toward fast screening and optimizing growth factors for use in the treatment of diseases including fibrosis.

Cellular and Molecular Mechanisms Underlying Tricuspid Valve Development and Disease.

Tricuspid valve (TV) disease is highly prevalent in the general population. For ages considered "the forgotten valve" because of the predominant interest in left-side valve disease, the TV has now received significant attention in recent years, with significant improvement both in diagnosis and in management of tricuspid disease. TV is characterized by complex anatomy, physiology, and pathophysiology, in which the right ventricle plays a fundamental role. Comprehensive knowledge of molecular and cellular mechanisms underlying TV development, TV disease, and tricuspid regurgitation-related right-ventricle cardiomyopathy is necessary to enhance TV disease understanding to improve the ability to risk stratify TR patients, while also predicting valve dysfunction and/or response to tricuspid regurgitation treatment. Scientific efforts are still needed to eventually decipher the complete picture describing the etiopathogenesis of TV and TV-associated cardiomyopathy, and future advances to this aim may be achieved by combining emerging diagnostic imaging modalities with molecular and cellular studies. Overall, basic science studies could help to streamline a new coherent hypothesis underlying both the development of TV during embryogenesis and TV-associated disease and its complications in adult life, providing the conceptual basis for the ultimate and innovative field of valve repair and regeneration using tissue-engineered heart valves.

Serum- and xeno-free culture of human umbilical cord perivascular cells for pediatric heart valve tissue engineering

BackgroundConstructs currently used to repair or replace congenitally diseased pediatric heart valves lack a viable cell population capable of functional adaptation in situ, necessitating repeated surgical intervention. Heart valve tissue engineering (HVTE) can address these limitations by producing functional living tissue in vitro that holds the potential for somatic growth and remodelling upon implantation. However, clinical translation of HVTE strategies requires an appropriate source of autologous cells that can be non-invasively harvested from mesenchymal stem cell (MSC)-rich tissues and cultured under serum- and xeno-free conditions. To this end, we evaluated human umbilical cord perivascular cells (hUCPVCs) as a promising cell source for in vitro production of engineered heart valve tissue.MethodsThe proliferative, clonogenic, multilineage differentiation, and extracellular matrix (ECM) synthesis capacities of hUCPVCs were evaluated in a commercial serum- and xeno-free culture medium (StemMACS™) on tissue culture polystyrene and benchmarked to adult bone marrow-derived MSCs (BMMSCs). Additionally, the ECM synthesis potential of hUCPVCs was evaluated when cultured on polycarbonate polyurethane anisotropic electrospun scaffolds, a representative biomaterial for in vitro HVTE.ResultshUCPVCs had greater proliferative and clonogenic potential than BMMSCs in StemMACS™ (p < 0.05), without differentiation to osteogenic and adipogenic phenotypes associated with valve pathology. Furthermore, hUCPVCs cultured with StemMACS™ on tissue culture plastic for 14 days synthesized significantly more total collagen, elastin, and sulphated glycosaminoglycans (p < 0.05), the ECM constituents of the native valve, than BMMSCs. Finally, hUCPVCs retained their ECM synthesizing capacity after 14 and 21 days in culture on anisotropic electrospun scaffolds.ConclusionOverall, our findings establish an in vitro culture platform that uses hUCPVCs as a readily-available and non-invasively sourced autologous cell population and a commercial serum- and xeno-free culture medium to increase the translational potential of future pediatric HVTE strategies.Graphical This study evaluated the proliferative, differentiation and extracellular matrix (ECM) synthesis capacities of human umbilical cord perivascular cells (hUCPVCs) when cultured in serum- and xeno-free media (SFM) against conventionally used bone marrow-derived MSCs (BMMSCs) and serum-containing media (SCM). Our findings support the use of hUCPVCs and SFM for in vitro heart valve tissue engineering (HVTE) of autologous pediatric valve tissue. Figure created with BioRender.com.

Electrospun Elastomeric Leaflet Substrates that Structurally and Mechanically Mimic Human Aortic Valve Leaflets

Creating leaflet substrates that accurately mimic the trilayered structure, anisotropic tensile characteristics, and elastomeric features of native human heart valve leaflets is essential to the success of heart valve tissue engineering. Earlier leaflet substrates have successfully replicated the mechanical properties of animal (porcine) heart valve leaflets. However, not one of them has been able to simultaneously replicate the trilayered structure and the highly anisotropic and elastomeric mechanical properties of human aortic heart valve leaflets. In this study, we employed a combination of polymers – polycaprolactone (PCL), poly(trimethylene carbonate-co-l-lactide) (PTMC-LA), and poly(trimethylene carbonate-co-caprolactone) (PTMC-CL) – in an electrospinning system to create elastomeric trilayer PCL/PTMC leaflet substrates that possess mechanical, flexural, and anisotropic properties similar to those of human native heart valve leaflets. We then compared these substrates with non-elastomeric trilayer PCL leaflet substrates to determine their effect on leaflet tissue engineering. Porcine valvular interstitial cells (PVICs) were cultured on these substrates for 1 month in static conditions to develop trilayer PCL and PCL/PTMC cell-cultured constructs. The PCL/PTMC substrates exhibited lower crystallinity and hydrophobicity than the PCL substrate, resulting in better cell adhesion and infiltration. The PCL/PTMC substrates demonstrated significantly greater cell proliferation, extracellular matrix production, and preferable gene and protein expression than the PCL substrates. Furthermore, in an osteogenic environment, the PCL/PTMC substrates showed superior resistance to calcification compared to the PCL substrates. The development of trilayer PCL/PTMC substrates with mechanical and structural characteristics resembling native tissue enhances leaflet tissue engineering.

Growing Heart Valve Implants for Children.

The current standard of care for pediatric patients with unrepairable congenital valvular disease is a heart valve implant. However, current heart valve implants are unable to accommodate the somatic growth of the recipient, preventing long-term clinical success in these patients. Therefore, there is an urgent need for a growing heart valve implant for children. This article reviews recent studies investigating tissue-engineered heart valves and partial heart transplantation as potential growing heart valve implants in large animal and clinical translational research. In vitro and in situ designs of tissue engineered heart valves are discussed, as well as the barriers to clinical translation.

Fibrin gel enhanced trilayer structure in cell-cultured constructs.

Efficient cell seeding and subsequent support from a substrate ensure optimal cell growth and neotissue development during tissue engineering, including heart valve tissue engineering. Fibrin gel as a cell carrier may provide high cell seeding efficiency and adhesion property, improved cellular interaction, and structural support to enhance cellular growth in trilayer polycaprolactone (PCL) substrates that mimic the structure of native heart valve leaflets. This cell carrier gel coupled with a trilayer PCL substrate may enable the production of native-like cell-cultured leaflet constructs suitable for heart valve tissue engineering. In this study, we seeded valvular interstitial cellsonto trilayer PCL substrates with fibrin gel as a cell carrier and cultured them for 1month in vitro to determine if this gel can improve cell proliferation and production of extracellular matrixwithin the trilayer cell-cultured constructs. We observed that the fibrin gel enhanced cellular proliferation, their vimentin expression, and collagen and glycosaminoglycanproduction, leading to improved structure and mechanical properties of the developing PCL cell-cultured constructs. Fibrin gel as a cell carrier significantly improved the orientations of the cells and their produced tissue materials within trilayer PCL substrates that mimic the structure of native heart valve leaflets and, thus, may be highly beneficial for developing functional tissue-engineered leaflet constructs.

Multiscale analysis of human tissue engineered matrices for next generation heart valve applications.

Human tissue-engineered matrices (hTEMs) have been proposed as a promising approach for in situ tissue engineered heart valves (TEHVs). However, there is still a limited understanding on how ECM composition in hTEMs develops over tissue culture time. Therefore, we performed a longitudinal hTEM assessment by 1) multiscale evaluation of hTEM composition during culture time (2, 4, 6-weeks), using (immuno)histology, biochemical assays, and mass spectrometry (LC-MS/MS); 2) analysis of protein pathways involved in ECM development using gene set enrichment analysis (GSEA); and 3) assessment of hTEM mechanical characterization using uniaxial tensile testing. Finally, as a proof-of-concept, TEHVs manufactured using 6-weeks hTEM samples were tested in a pulse duplicator. LC-MS/MS confirmed the tissue culture time-dependent increase in ECM proteins observed in histology and biochemical assays, revealing the most abundant collagens (COL6, COL12), proteoglycans (HSPG2, VCAN), and glycoproteins (FN, TNC). GSEA identified the most represented protein pathways in the hTEM at 2-weeks (mRNA metabolic processes), 4-weeks (ECM production), and 6-weeks (ECM organization and maturation). Uniaxial mechanical testing showed increased stiffness and stress at failure, and reduction in strain over tissue culture time. hTEM-based TEHVs demonstrated promising in vitro performance at both pulmonary and aortic pressure conditions, with symmetric leaflet coaptation and no stenosis. In conclusion, ECM protein abundance and maturation increased over tissue culture time, with consequent improvement of hTEM mechanical characteristics. These findings suggest that longer tissue culture impacts tissue organization, leading to an hTEM that may be suitable for high-pressure applications. STATEMENT OF SIGNIFICANCE: It is believed that the composition of the extracellular matrix (ECM) in the human tissue engineered matrices (hTEM) may favor tissue engineered heart valve (TEHV) remodeling upon implantation. However, the exact protein composition of the hTEM, and how this impacts tissue mechanical properties, remains unclear. Hence, we developed a reproducible rotation-based tissue culture method to produce hTEM samples. We performed a longitudinal assessment using different analytical techniques and mass spectrometry. Our data provided an in-depth characterization of the hTEM proteome with focus on ECM components, their development, and how they may impact the mechanical properties. Based on these results, we manufactured functional hTEM-based TEHVs at aortic-like condition in vitro. These outcomes pose an important step in translating hTEM-based TEHVs into clinics and in predicting their remodeling potential upon implantation.

Elastomeric Trilayer Substrates with Native-like Mechanical Properties for Heart Valve Leaflet Tissue Engineering.

Heart valve leaflets have a complex trilayered structure with layer-specific orientations, anisotropic tensile properties, and elastomeric characteristics that are difficult to mimic collectively. Previously, trilayer leaflet substrates intended for heart valve tissue engineering were developed with nonelastomeric biomaterials that cannot deliver native-like mechanical properties. In this study, by electrospinning polycaprolactone (PCL) polymer and poly(l-lactide-co-ε-caprolactone) (PLCL) copolymer, we created elastomeric trilayer PCL/PLCL leaflet substrates with native-like tensile, flexural, and anisotropic properties and compared them with trilayer PCL leaflet substrates (as control) to find their effectiveness in heart valve leaflet tissue engineering. These substrates were seeded with porcine valvular interstitial cells (PVICs) and cultured for 1 month in static conditions to produce cell-cultured constructs. The PCL/PLCL substrates had lower crystallinity and hydrophobicity but higher anisotropy and flexibility than PCL leaflet substrates. These attributes contributed to more significant cell proliferation, infiltration, extracellular matrix production, and superior gene expression in the PCL/PLCL cell-cultured constructs than in the PCL cell-cultured constructs. Further, the PCL/PLCL constructs showed better resistance to calcification than PCL constructs. Trilayer PCL/PLCL leaflet substrates with native-like mechanical and flexural properties could significantly improve heart valve tissue engineering.

Nitric Oxide Generation and Endothelial Progenitor Cells Recruitment for Improving Hemocompatibility and Accelerating Endothelialization of Tissue Engineering Heart Valve (Adv. Funct. Mater. 9/2023)

Nitric Oxide Generation and Endothelial Progenitor Cells Recruitment for Improving Hemocompatibility and Accelerating Endothelialization of Tissue Engineering Heart Valve (Adv. Funct. Mater. 9/2023)

Biomimetic polymeric transcatheter heart valve leaflets with low calcification and good regenerative ability.

Transcatheter aortic valve replacement (TAVR) technology is quickly advancing in clinic, however, as it expands to low-risk populations and younger patients (age <65 years), device durability is becoming a major challenge. Tissue-engineered heart valves (TEHVs) are a potential alternative. In this study, a bionic tri-layer tissue-engineered heart valve was constructed using poly (L-lactate-co-ε-caprolactone) (PLCL), gelatin (GEL), hyaluronic acid (HA) and silk fibroin (SF), to simulate the fibrosa, spongiosa and ventricular layer of natural heart valves. To obtain a scaffold with sufficient strength and regenerative capacity, we optimized the ratio of components of each layer. The physical and mechanical properties were tested, and the cytocompatibility, calcification deposition and regeneration potential were tested in a rat model of subcutaneous implantation. Finally, the hydrodynamic function of the new TAVR device was verified. The results demonstrated that the strength of the tri-layer valve could reach up to 10 MPa, significantly higher than that of the PLCL and mono-layer groups. Most importantly, calcification related gene expression was down-regulated in the TEHV groups compared to valvular interstitial cells (VICs) treated with calcification induced medium, and calcification levels of TEHVs in in vivo assay were below 0.5 μg mg-1. Besides, we found HA in the middle layer was very conducive to rapid cell infiltration and good angiogenesis, which ultimately promoted host tissue regeneration at 8 weeks after implantation. Collectively, we provide a bionic tri-layer electrospun leaflet with appropriate mechanical strength, low calcification and good regenerative capacity, which has great potential as a TEHV leaflet.

Nitric Oxide Generation and Endothelial Progenitor Cells Recruitment for Improving Hemocompatibility and Accelerating Endothelialization of Tissue Engineering Heart Valve

AbstractTissue engineering heart valve (TEHV) offers great potential to overcome the limitations of commercial artificial valves used in clinical practice as a permanent prosthetic valve. Currently, decellularized heart valve (DHV) is the most widely used scaffold for TEHV, but showed suboptimal performance due to difficulty of endothelialization. Facilitating endothelialization of DHV is indispensable for better valve performance, and excellent hemocompatibility guarantees enough time windows for endothelialization process. Herein, a dual‐functional TEHV scaffold with improving hemocompatibility and accelerating endothelialization is constructed by modifying DHV with copper ions (Cu) and growth differentiation factor 11 (GDF11). Results show the newly‐constructed scaffold successfully generates endogenous nitric oxide (NO) through catalysis of Cu, and possesses improved hemocompatibility by down‐regulating platelets activation and adhesion. Furthermore, GDF11 immobilization significantly accelerates scaffold endothelialization through facilitating recruitment, supporting growth, and alleviating apoptosis of endothelial progenitor cells . This TEHV scaffold shows favorable performance under in vivo hemodynamic environment with intact endothelial coverage and adaptive ECM remodeling, and without thrombus or calcification formation. This newly‐constructed TEHV scaffold is expected to make up for the shortcomings of currently available prosthetic valves in clinical practice and has the potential possibility of rapid translation to the clinic as a better prosthetic valve.