Time-resolved Kinetic Studies Research Articles

Side-Chain Pruning Has Limited Impact on Substrate Preference in a Promiscuous Enzyme

Detoxifying enzymes such as flavin-containing monooxygenases deal with a huge array of highly diverse xenobiotics and toxic compounds. In addition to being of high physiological relevance, these drug-metabolizing enzymes are useful catalysts for synthetic chemistry. Despite the wealth of studies, the molecular basis of their relaxed substrate selectivity remains an open question. Here, we addressed this issue by applying a cumulative alanine mutagenesis approach to cyclohexanone monooxygenase from Thermocrispum municipale, a flavin-dependent Baeyer–Villiger monooxygenase which we chose as a model system because of its pronounced thermostability and substrate promiscuity. Simultaneous removal of up to eight noncatalytic active-site side chains including four phenylalanines had no effect on protein folding, thermostability, and cofactor loading. We observed a linear decrease in activity, rather than a selectivity switch, and attributed this to a less efficient catalytic environment in the enlarged active-site space. Time-resolved kinetic studies confirmed this interpretation. We also determined the crystal structure of the enzyme in complex with a mimic of the reaction intermediate that shows an unaltered overall protein conformation. These findings led us to propose that this cyclohexanone monooxygenase may lack a distinct substrate selection mechanism altogether. We speculate that the main or exclusive function of the protein shell in promiscuous enzymes might be the stabilization and accessibility of their very reactive catalytic intermediates.

Kinetic Studies of Nitrate Radicals: Flash Photolysis at 193 nm

Nitrate radicals, NO3, were produced for the first time by 193 nm laser flash photolysis of N2O5 and HNO3. Detection was achieved due to NO3's strong absorption at 622.7 nm confirmed by measurements of the absorption spectrum in the range of 617–625 nm using both NO3 precursors. Time-resolved kinetic studies allowed the determination of room temperature rate coefficients for the reactions of NO3 with 2-methylbut-2-ene and NO2 of (1.28 ± 0.11) × 10−11 and (8.4 ± 1.2) × 10−13 cm3 molecule−1 s−1, respectively. The rate coefficients compare well to previous measurements with alternative techniques, suggesting that the reported method is valid and may be applied in follow-up studies. The rate coefficient for 2-methylbut-2-ene is compared to previous measurements and predictions for the alkene as well as the related alkenol. The new data are consistent with a previously suggested deactivation of the reactive site of the double bond if adjacent to an OH group. A calculated atmospheric lifetime for 2-methylbut-2-ene with respect to NO3-initiated oxidation of less than 3 min suggests predominant removal by NO3 in the atmosphere.

Sulfur Radical-Induced Redox Modifications in Proteins: Analysis and Mechanistic Aspects.

The sulfur-containing amino acids cysteine (Cys) and methionine (Met) are prominent protein targets of redox modification during conditions of oxidative stress. Here, two-electron pathways have received widespread attention, in part due to their role in signaling processes. However, Cys and Met are equally prone to one-electron pathways, generating intermediary radicals and/or radial ions. These radicals/radical ions can generate various reaction products that are not commonly monitored in redox proteomic studies, but they may be relevant for the fate of proteins during oxidative stress. Recent Advances: Time-resolved kinetic studies and product analysis have expanded our mechanistic understanding of radical reaction pathways of sulfur-containing amino acids. These reactions are now studied in some detail for Met and Cys in proteins, and homocysteine (Hcy) chemically linked to proteins, and the role of protein radical reactions in physiological processes is evolving. Radical-derived products from Cys, Hcy, and Met can react with additional amino acids in proteins, leading to secondary protein modifications, which are potentially remote from initial points of radical attack. These products may contain intra- and intermolecular cross-links, which may lead to protein aggregation. Protein sequence and conformation will have a significant impact on the formation of such products, and a thorough understanding of reaction mechanisms and specifically how protein structure influences reaction pathways will be critical for identification and characterization of novel reaction products. Future studies must evaluate the biological significance of novel reaction products that are derived from radical reactions of sulfur-containing amino acids. Antioxid. Redox Signal. 26, 388-405.

ChemInform Abstract: Tuning Reactivity and Selectivity in Hydrogen Atom Transfer from Aliphatic C—H Bonds to Alkoxyl Radicals: Role of Structural and Medium Effects

AbstractReview: 50 refs.

Tuning reactivity and selectivity in hydrogen atom transfer from aliphatic C-H bonds to alkoxyl radicals: role of structural and medium effects.

Hydrogen atom transfer (HAT) is a fundamental reaction that takes part in a wide variety of chemical and biological processes, with relevant examples that include the action of antioxidants, damage to biomolecules and polymers, and enzymatic and biomimetic reactions. Moreover, great attention is currently devoted to the selective functionalization of unactivated aliphatic C-H bonds, where HAT based procedures have been shown to play an important role. In this Account, we describe the results of our recent studies on the role of structural and medium effects on HAT from aliphatic C-H bonds to the cumyloxyl radical (CumO(•)). Quantitative information on the reactivity and selectivity patterns observed in these reactions has been obtained by time-resolved kinetic studies, providing a deeper understanding of the factors that govern HAT from carbon and leading to the definition of useful guidelines for the activation or deactivation of aliphatic C-H bonds toward HAT. In keeping with the electrophilic character of alkoxyl radicals, polar effects can play an important role in the reactions of CumO(•). Electron-rich C-H bonds are activated whereas those that are α to electron withdrawing groups are deactivated toward HAT, with these effects being able to override the thermodynamic preference for HAT from the weakest C-H bond. Stereoelectronic effects can also influence the reactivity of the C-H bonds of ethers, amines, and amides. HAT is most rapid when these bonds can be eclipsed with a lone pair on an adjacent heteroatom or with the π-system of an amide functionality, thus allowing for optimal orbital overlap. In HAT from cyclohexane derivatives, tertiary axial C-H bond deactivation and tertiary equatorial C-H bond activation have been observed. These effects have been explained on the basis of an increase in torsional strain or a release in 1,3-diaxial strain in the HAT transition states, with kH(eq)/kH(ax) ratios that have been shown to exceed one order of magnitude. Medium effects on HAT from aliphatic C-H bonds to CumO(•) have been also investigated. With basic substrates, from large to very large decreases in kH have been measured with increasing solvent hydrogen bond donor (HBD) ability or after addition of protic acids or alkali and alkaline earth metal ions, with kinetic effects that exceed 2 orders of magnitude in the reactions of tertiary alkylamines and alkanamides. Solvent hydrogen bonding, protonation, and metal ion binding increase the electron deficiency and the strength of the C-H bonds of these substrates deactivating these bonds toward HAT, with the extent of this deactivation being modulated by varying the nature of the substrate, solvent, protic acid, and metal ion. These results indicate that through these interactions careful control over the HAT reactivity of basic substrates toward CumO(•) and other electrophilic radicals can be achieved, suggesting moreover that these effects can be exploited in an orthogonal fashion for selective C-H bond functionalization of substrates bearing different basic functionalities.

Reaction of silylene with sulfur dioxide: some gas-phase kinetic and theoretical studies

Time-resolved kinetic studies of the reaction of silylene, SiH2, with SO2 have been carried out in the gas phase over the temperature range 297-609 K, using laser flash photolysis to generate and monitor SiH2. The second order rate coefficients at 1.3 kPa (SF6 bath gas) fitted the Arrhenius equation: log(k/cm(3) molecule(-1) s(-1)) = (-10.10 ± 0.06) + (3.46 ± 0.45 kJ mol(-1))/RT ln 10 where the uncertainties are single standard deviations. The collisional efficiency is 71% at 298 K, and in kinetic terms the reaction most resembles those of SiH2 with CH3CHO and (CH3)2CO. Quantum chemical calculations at the G3 level suggest a mechanism occurring via addition of SiH2 to one of the S=O double bonds leading to formation of the three-membered ring, thione-siloxirane which has a low energy barrier to ring expansion to yield the four-membered ring, 3-thia-2,4-dioxasiletane, the lowest energy adduct found on the potential energy (PE) surface. RRKM calculations, however, show that, if formed, this molecule would only be partially stabilised under the reaction conditions and the rate coefficients would be pressure dependent, in contrast with experimental findings. The G3 calculations reveal the complexity of possible intermediates and end products and taken together with the RRKM calculations indicate the most likely end products to be H2SiO + SO ((3)Σ(-)). The reaction is compared and contrasted with that of SiH2 + CO2.

Time-resolved gas-phase kinetic studies of the reaction of dimethylsilylene with triethylsilane-1-d: kinetic isotope effect for the Si–H insertion process

Time-resolved kinetic studies of the reaction of dimethylsilylene, SiMe2, generated by laser flash photolysis of 1,1-dimethyl-1-silacyclopent-3-ene, have been carried out to obtain rate coefficients for its bimolecular reactions with trimethylsilane-1-d, Me3SiD. The reaction was studied in the gas phase at five temperatures in the range 292-605 K. The rate coefficients showed no pressure dependence in the presence of up to 13 kPa of SF6. The second order rate coefficients obtained at 0.7 kPa fitted the Arrhenius equation: log(k/cm(3) molecule(-1) s(-1)) = (-13.53 ± 0.19) + (11.29 ± 1.46) kJ mol(-1)/RT ln 10. By comparison with rate coefficients obtained previously for the reaction of SiMe2 with Me3SiH, a set of kinetic isotope effects, kH/kD, of value ca. 1.2 showing very little temperature dependence was obtained. Theoretical support for these values has been obtained by means of quantum chemical calculations used in conjunction with transition state theory. This study provides the first comprehensive set of kinetic isotope effects for the Si-H(D) insertion process of a silylene in the gas phase.

Time-Resolved Gas-Phase Kinetic, Quantum Chemical, and RRKM Studies of Reactions of Silylene with Alcohols

Time-resolved kinetic studies of silylene, SiH(2), generated by laser flash photolysis of 1-silacyclopent-3-ene and phenylsilane, have been carried out to obtain rate constants for its bimolecular reactions with methanol, ethanol, 1-propanol, 1-butanol, and 2-methyl-1-butanol. The reactions were studied in the gas phase over the pressure range 1-100 Torr in SF(6) bath gas, at room temperature. In the study with methanol several buffer gases were used. All five reactions showed pressure dependences characteristic of third body assisted association reactions. The rate constant pressure dependences were modeled using RRKM theory, based on E(0) values of the association complexes obtained by ab initio calculation (G3 level). Transition state models were adjusted to fit experimental fall-off curves and extrapolated to obtain k(∞) values in the range (1.9-4.5) × 10(-10) cm(3) molecule(-1) s(-1). These numbers, corresponding to the true bimolecular rate constants, indicate efficiencies of between 16% and 67% of the collision rates for these reactions. In the reaction of SiH(2) + MeOH there is a small kinetic component to the rate which is second order in MeOH (at low total pressures). This suggests an additional catalyzed reaction pathway, which is supported by the ab initio calculations. These calculations have been used to define specific MeOH-for-H(2)O substitution effects on this catalytic pathway. Where possible our experimental and theoretical results are compared with those of previous studies.

ChemInform Abstract: Kinetic Studies of Reactions of Organosilylenes: What Have They Taught Us?

AbstractReview: 109 refs.

Kinetic studies of reactions of organosilylenes: what have they taught us?

Rate constants for bimolecular reactions, obtained through time-resolved kinetic studies both in the gas and liquid phases are reviewed. Data for reactions of MeSiH, PhSiH, ClSiH, SiCl(2), SiMe(2), MeSiPh, SiPh(2) and SiMes(2) are covered. Where possible, substituent effects relative to SiH(2) have been obtained. These demonstrate widely varying effects between different types of reaction, which aids mechanistic understanding. Reactivities are high for all silylenes, but substituents can reduce them by both electronic and steric effects. The gas and liquid phase data (mainly for SiMe(2)) are compared and appear to be reasonably consistent. This review, although detailed, is not comprehensive.

Time-Resolved Gas-Phase Kinetic, Quantum Chemical and RRKM Studies of Reactions of Silylene with Cyclic Ethers

Time-resolved kinetic studies of silylene, SiH(2), generated by laser flash photolysis of phenylsilane, have been carried out to obtain rate constants for its bimolecular reactions with oxirane, oxetane, and tetrahydrofuran (THF). The reactions were studied in the gas phase over the pressure range 1-100 Torr in SF(6) bath gas, at four or five temperatures in the range 294-605 K. All three reactions showed pressure dependences characteristic of third-body-assisted association reactions with, surprisingly, SiH(2) + oxirane showing the least and SiH(2) + THF showing the most pressure dependence. The second-order rate constants obtained by extrapolation to the high-pressure limits at each temperature fitted the Arrhenius equations where the error limits are single standard deviations: log(k(infinity)oxirane/cm3 molecule(-1)s(-1))=(-11.03+/-0.07) + (5.70+/-0.51)kJ mol(-1) ln 10, log(k(infinity)oxetane/cm3 molecule(-1)s(-1))=(-11.17+/-0.11)+(9.04+/-0.78) kJ mol(-1)/RT ln 10, log(k(infinity)THF/cm3 molecule(-1)s(-1))=(-10.59+/-0.10)+(5.76+/-0.65) kJ mol(-1)/RT ln 10. Binding-energy values of 77, 97, and 92 kJ mol-1 have been obtained for the donor-acceptor complexes of SiH2 with oxirane, oxetane, and THF, respectively, by means of quantum chemical (ab initio) calculations carried out at the G3 level. The use of these values to model the pressure dependences of these reactions, via RRKM theory, provided a good fit only in the case of SiH2 + THF. The lack of fit in the other two cases is attributed to further reaction pathways for the association complexes of SiH2 with oxirane and oxetane. The finding of ethene as a product of the SiH2 + oxirane reaction supports a pathway leading to H2Sid=O + C2H4 predicted by the theoretical calculations of Apeloig and Sklenak.

Time-resolved RNA SHAPE chemistry: quantitative RNA structure analysis in one-second snapshots and at single-nucleotide resolution

RNA selective 2'-hydroxyl acylation analyzed by primer extension (SHAPE) chemistry exploits the discovery that conformationally dynamic nucleotides preferentially adopt configurations that facilitate reaction between the 2'-OH group and a hydroxyl-selective electrophile, such as benzoyl cyanide (BzCN), to form a 2'-O-adduct. BzCN is ideally suited for quantitative, time-resolved analysis of RNA folding and ribonucleoprotein (RNP) assembly mechanisms because this reagent both reacts with flexible RNA nucleotides and also undergoes auto-inactivating hydrolysis with a half-life of 0.25 s at 37 degrees C. RNA folding is initiated by addition of Mg(2+) or protein, or other change in solution conditions, and nucleotide resolution structural images are obtained by adding aliquots of the evolving reaction to BzCN and then 'waiting' for 1 second. Sites of the 2'-O-adduct formation are subsequently scored as stops to primer extension using reverse transcriptase. This time-resolved SHAPE protocol makes it possible to obtain 1-second structural snapshots in time-resolved kinetic studies for RNAs of arbitrary length and complexity in a straightforward and concise experiment.

The gas-phase reaction between silylene and 2-butyne: kinetics, isotope studies, pressure dependence studies and quantum chemical calculations

Time-resolved kinetic studies of the reactions of silylene, SiH(2), and dideutero-silylene, SiD(2), generated by laser flash photolysis of phenylsilane and phenylsilane-d(3), respectively, have been carried out to obtain rate coefficients for their bimolecular reactions with 2-butyne, CH(3)C[triple bond, length as m-dash]CCH(3). The reactions were studied in the gas phase over the pressure range 1-100 Torr in SF(6) bath gas at five temperatures in the range 294-612 K. The second-order rate coefficients, obtained by extrapolation to the high pressure limits at each temperature, fitted the Arrhenius equations where the error limits are single standard deviations: log(k(H)(Infinity)/cm(3) molecule(-1) s(-1) = (-9.67 +/- 0.04) + (1.71 +/- 0.33) kJ mol(1)/RTIn10log(k(D)(Infinity)/cm(3) molecule(-1) s(-1) = (-9.65 +/- 0.01) + (1.92 +/- 0.13) kJ mol(-1)/RTIn10. Additionally, pressure-dependent rate coefficients for the reaction of SiH(2) with 2-butyne in the presence of He (1-100 Torr) were obtained at 301, 429 and 613 K. Quantum chemical (ab initio) calculations of the SiC(4)H(8) reaction system at the G3 level support the formation of 2,3-dimethylsilirene [cyclo-SiH(2)C(CH(3))[double bond, length as m-dash]C(CH(3))-] as the sole end product. However, reversible formation of 2,3-dimethylvinylsilylene [CH(3)CH[double bond, length as m-dash]C(CH(3))SiH] is also an important process. The calculations also indicate the probable involvement of several other intermediates, and possible products. RRKM calculations are in reasonable agreement with the pressure dependences at an enthalpy value for 2,3-dimethylsilirene fairly close to that suggested by the ab initio calculations. The experimental isotope effects deviate significantly from those predicted by RRKM theory. The differences can be explained by an isotopic scrambling mechanism, involving H-D exchange between the hydrogens of the methyl groups and the D-atoms in the ring in 2,3-dimethylsilirene-1,1-d(2). A detailed mechanism involving several intermediate species, which is consistent with the G3 energy surface, is proposed to account for this.

Time-resolved gas-phase kinetic study of the germylene addition reaction, GeH2 + CH3CCCH3

Time-resolved kinetic studies of the reaction of germylene, GeH2, generated by laser flash photolysis of 3,4-dimethyl-1-germacyclopent-3-ene, have been carried out to obtain rate constants for its bimolecular reaction with 2-butyne, CH3C[triple bond, length as m-dash]CCH3. The reaction was studied in the gas phase over the pressure range 1-100 Torr in SF6 bath gas, at five temperatures in the range 300-556 K. The second order rate constants obtained by extrapolation to the high pressure limits at each temperature, fitted the Arrhenius equation: log(kinfinity/cm3 molecule(-1) s(-1)=(-10.46+/-0.06)+(5.16+/-0.47) kJ mol(-1)/RT ln 10. Calculations of the energy surface of the GeC4H8 reaction system were carried out employing the additivity principle, by combining previous quantum chemical calculations of related reaction systems. These support formation of 1,2-dimethylvinylgermylene (rather than 2,3-dimethylgermirene) as the end product. RRKM calculations of the pressure dependence of the reaction are in reasonable agreement with this finding. The reactions of GeH2 with C2H2 and with CH3C[triple bond, length as m-dash]CCH3 are compared and contrasted.

Alloxan-dialuric acid cycling: A complex redox mechanism

Time-resolved kinetic studies involving the reactions of alloxan (A.H2O) with the reducing species superoxide and carbon dioxide radical anions and the reaction of dialuric acid (HA−) with sulphate radicals showed that the same radical (AH.) was formed either by the one-electron reduction of alloxan or by the one-electron oxidation of dialuric acid. A mechanism including several reversible reactions was proposed and validated. A detailed kinetic analysis yields the following bimolecular rate constants: k(A.H2O + ) < 105m−1 s−1, k(A.H2O + O2−)=(3.4±0.5)×106m−1 s−1, k(HA−+)=(8±1)×107m−1 s−1 and k(AH.+AH.)=(1.7±0.8)×108m−1 s−1. From these values, the redox potentials E°(A.H2O,H+/AH.)=(−290±20) mV, E°(AH./HA−)=(277±20) mV and E°(A.H2O,H+/HA−)=(−15±20) mV, were obtained.

Time-Resolved RNA SHAPE Chemistry

Selective 2'-hydroxyl acylation analyzed by primer extension (SHAPE) chemistry yields quantitative RNA secondary and tertiary structure information at single nucleotide resolution. SHAPE takes advantage of the discovery that the nucleophilic reactivity of the ribose 2'-hydroxyl group is modulated by local nucleotide flexibility in the RNA backbone. Flexible nucleotides are reactive toward hydroxyl-selective electrophiles, whereas constrained nucleotides are unreactive. Initial versions of SHAPE chemistry, which employ isatoic anhydride derivatives that react on the minute time scale, are emerging as the ideal technology for monitoring equilibrium structures of RNA in a wide variety of biological environments. Here, we extend SHAPE chemistry to a benzoyl cyanide scaffold to make possible facile time-resolved kinetic studies of RNA in approximately 1 s snapshots. We then use SHAPE chemistry to follow the time-dependent folding of an RNase P specificity domain RNA. Tertiary interactions form in two distinct steps with local tertiary contacts forming an order of magnitude faster than long-range interactions. Rate-determining tertiary folding requires minutes despite that no non-native interactions must be disrupted to form the native structure. Instead, overall folding is limited by simultaneous formation of interactions approximately 55 A distant in the RNA. Time-resolved SHAPE holds broad potential for understanding structural biogenesis and the conformational interconversions essential to the functions of complex RNA molecules at single nucleotide resolution.

The Addition Reaction between Silylene and Ethyne: Further Isotope Studies, Pressure Dependence Studies, and Quantum Chemical Calculations

Time-resolved kinetic studies of the reaction of dideutero-silylene, SiD 2, generated by laser flash photolysis of phenylsilane-d 3, have been carried out to obtain rate constants for its bimolecular reaction with C 2H 2. The reaction was studied in the gas phase over the pressure range 1-100 Torr in SF 6 bath gas, at five temperatures in the range 297-600 K. The second-order rate constants obtained by extrapolation to the high-pressure limits at each temperature fitted the Arrhenius equation log( k (infinity)/cm (3) molecule (-1) s (-1)) = (-10.05 +/- 0.05) + (3.43 +/- 0.36 kJ mol (-1))/ RT ln 10. The rate constants were used to obtain a comprehensive set of isotope effects by comparison with earlier obtained rate constants for the reactions of SiH 2 with C 2H 2 and C 2D 2. Additionally, pressure-dependent rate constants for the reaction of SiH 2 with C 2H 2 in the presence of He (1-100 Torr) were obtained at 300, 399, and 613 K. Quantum chemical (ab initio) calculations of the SiC 2H 4 reaction system at the G3 level support the initial formation of silirene, which rapidly isomerizes to ethynylsilane as the major pathway. Reversible formation of vinylsilylene is also an important process. The calculations also indicate the involvement of several other intermediates, not previously suggested in the mechanism. RRKM calculations are in semiquantitative agreement with the pressure dependences and isotope effects suggested by the ab initio calculations, but residual discrepancies suggest the possible involvement of the minor reaction channel, SiH 2 + C 2H 2 --> Si( (3)P 1) + C 2H 4. The results are compared and contrasted with previous studies of this reaction system.

Surprisingly Slow Reaction of Dimethylsilylene with Dimethylgermane: Time-Resolved Kinetic Studies and Related Quantum Chemical Calculations

Time-resolved studies of silylene, SiH2, and dimethylsilylene, SiMe2, generated by the 193 nm laser flash photolysis of appropriate precursor molecules have been carried out to obtain rate constants for their bimolecular reactions with dimethylgermane, Me2GeH2, in the gas phase. SiMe2 + Me2GeH2 was studied at five temperatures in the range 299-555 K. Problems of substrate UV absorption at 193 nm at temperatures above 400 K meant that only three temperatures could be used reliably for rate constant measurement. These rate constants gave the Arrhenius parameters log(A/cm3 molecule(-1) s(-1)) = -13.25 +/- 0.16 and E(a) = -(5.01 +/- 1.01) kJ mol(-1). Only room temperature studies of SiH2 were carried out. These gave values of (4.05 +/- 0.06) x 10(-10) cm3 molecule(-1) s(-1) (SiH2 + Me2GeH2 at 295 K) and also (4.41 +/- 0.07) x 10(-10) cm3 molecule(-1) s(-1) (SiH2 + MeGeH3 at 296 K). Rate constant comparisons show the surprising result that SiMe2 reacts 12.5 times slower with Me2GeH2 than with Me2SiH2. Quantum chemical calculations (G2(MP2,SVP)//B3LYP level) of the model Si-H and Ge-H insertion processes of SiMe2 with SiH4/MeSiH3 and GeH4/MeGeH3 support these findings and show that the lower reactivity of SiMe2 with Ge-H bonds is caused by a higher secondary barrier for rearrangement of the initially formed complexes. Full details of the structures of intermediate complexes and the discussion of their stabilities are given in the paper. Other, related, comparisons of silylene reactivity are also presented.

The reaction between silylene and ammonia: Some gas-phase kinetic and quantum chemical studies

Time-resolved kinetic studies of the reaction of silylene, SiH2, generated by 193 nm laser flash photolysis of silacyclopent-3-ene, have been carried out in the presence of ammonia, NH3. Second order kinetics were observed. The reaction was studied in the gas phase at 10 Torr total pressure in SF6 bath gas at each of the three temperatures, 299, 340 and 400 K. The second order rate constants (laser pulse energy of 60 mJ +) fitted the Arrhenius equation: $${\rm log}(k/{\rm cm}^3 {\rm molecule}^{-1} {\rm s}^{-1}) = (-10.37 \pm 0.17) + (0.36 \pm 1.12\, {\rm kJ mol}^{-1})/{\rm RT}\,{\rm In}$$ noindent Experiments at other pressures showed that these rate constants were unaffected by pressure in the range 10–100 Torr, but showed small decreases in value at 3 and 1 Torr. There was also a weak intensity dependence, with rate constants decreasing at laser pulse energies of 30 mJ +. Ab initio calculations at the G3 level of theory, show that SiH2+NH3 should form an initial adduct (donor-acceptor complex), but that energy barriers are too great for further reaction of the adduct. This implies that SiH2+NH3 should be a pressure dependent association reaction. The experimental data are inconsistent with this and we conclude that SiH2 decays are better explained by reaction of SiH2 with the amino radical, NH2, formed by photodissociation of NH3 at 193 nm. The mechanism of this previously unstudied reaction is discussed.

First Detection of Methylgermylene in the Gas Phase and Time-Resolved Study of Some of Its Reactions

A new transient species has been produced and detected by the gas-phase, 193 nm laser flash photolysis of 1,3,4-trimethylgermacyclopent-3-ene, TMGCP. The species has strong visible absorptions in the wavelength region 450−520 nm (maximum at 485 nm) and is attributed to the germylene, MeGeH. Time-resolved kinetic studies have led to the first rate constants for its reactions with GeH4, Me2GeH2, C2H2, C2H4, C3H6, i-C4H8, TMGCP, MeOH, HCl, and SO2. The reactivity of MeGeH is compared to those of GeH2 and GeMe2. The Me-for-H substituent effect varies according to reaction type and is not constant from GeH2 to MeGeH to GeMe2.