Time-resolved Absorption Spectroscopy Research Articles

Facile Construction of a Double-Heterojunction Perovskite Quantum Dot System for Efficient Photocatalytic Cr6+ Reduction.

Based on their excellent stability, high carrier mobility, and wide photoresponse range, composites formed by embedding perovskite quantum dots (PQDs) into metal-organic frameworks (PQDs@MOF) show great development potential in the field of photocatalysis, including the toxic hexavalent chromium (Cr6+) degradation, CO2 reduction, H2 production, etc. However, the rapid recombination of photogenerated carriers is still a major obstacle to the improvement of photocatalytic performance, and the internal mechanism of photocatalysis is still unclear. In this work, we construct a novel double heterojunction photocatalyst by encapsulating CsPbBr3 PQDs in Zr-based metal-organic frameworks (UiO-67) and loading additional hole-acceptor pentylenetetrazol (PTZ). Spontaneous photoinduced charge-transfer and separation between interfaces are confirmed by time-resolved photoluminescence and transient absorption spectroscopy. Furthermore, compared with pure UiO-67, the photoactivity of CsPbBr3 PQDs@UiO-67@PTZ increased 3-fold due to the long-lived charge-separated state. Our findings provide a new guideline for the design of PQDs@MOF-based photocatalysts with long-lived photogenerated carriers and outstanding photocatalytic activity.

Luminescent Platinum(II) Complexes with Stimuli-Responsive Flexible Lewis Pair Ligands: Spectroscopic and Computational Studies.

A series of new luminescent bimetallic platinum(II) complexes with stimuli-responsive flexible Lewis pair (FlexLP) ligands are described. The FlexLP ligands consist of a dimesitylboron Lewis acid and diphenylphosphine oxide Lewis base which are in equilibrium between the unbound open form and the Lewis adduct, controlled by the hydrogen bond donating strength of the solvent. Spectroscopic techniques and density functional theory (DFT) calculations were used to interpret the photophysics of the platinum(II) complexes. All complexes exhibit tunable absorption in the region of 300-500 nm and green to orange photoluminescence, depending on the ratio of weak (THF) to strong (MeOH) hydrogen bond donating solvent employed. Spectroscopic and computational data shows that phosphine and peripheral acetylide ligands on the platinum(II) centers have limited influence on the emission energy, indicating the emission originates from the FlexLP-dominated fluorescence. Using time-resolved transient absorption spectroscopy it is shown that the complexes undergo intersystem crossing (ISC) to the triplet-excited state upon photoexcitation, and the ISC efficiency is affected by the peripheral acetylide ligands. The triplet-excited state lifetime can also be manipulated by the state of the FlexLP ligand, with the closed form complexes having longer lifetimes than the open form complexes.

Large-Scale Direct Growth of Monolayer MoS2 on Patterned Graphene for van der Waals Ultrafast Photoactive Circuits.

Two-dimensional (2D) van der Waals heterostructures combine the distinct properties of individual 2D materials, resulting in metamaterials, ideal for emergent electronic, optoelectronic, and spintronic phenomena. A significant challenge in harnessing these properties for future hybrid circuits is their large-scale realization and integration into graphene interconnects. In this work, we demonstrate the direct growth of molybdenum disulfide (MoS2) crystals on patterned graphene channels. By enhancing control over vapor transport through a confined space chemical vapor deposition growth technique, we achieve the preferential deposition of monolayer MoS2 crystals on monolayer graphene. Atomic resolution scanning transmission electron microscopy reveals the high structural integrity of the heterostructures. Through in-depth spectroscopic characterization, we unveil charge transfer in Graphene/MoS2, with MoS2 introducing p-type doping to graphene, as confirmed by our electrical measurements. Photoconductivity characterization shows that photoactive regions can be locally created in graphene channels covered by MoS2 layers. Time-resolved ultrafast transient absorption (TA) spectroscopy reveals accelerated charge decay kinetics in Graphene/MoS2 heterostructures compared to standalone MoS2 and upconversion for below band gap excitation conditions. Our proof-of-concept results pave the way for the direct growth of van der Waals heterostructure circuits with significant implications for ultrafast photoactive nanoelectronics and optospintronic applications.

Coupled X-ray Absorption/UV-vis Monitoring of a Prototypical Oscillating Reaction.

Oscillating reactions are among the most intriguing phenomena in chemistry, but many questions on their mechanisms still remain unanswered, due to their intrinsic complexity and to the low sensitivity of the most common spectroscopic techniques toward the reaction brominated species. In this work, we investigate the cerium ion-catalyzed Belousov-Zhabotinsky (BZ) oscillating reaction by means of time-resolved X-ray absorption spectroscopy (XAS), in combination with UV-vis spectroscopy and unsupervised machine learning, multivariate curve resolution, and kinetic analyses. Altogether, we provide new insights into the collective oscillatory behavior of the key brominated species involved in the classical BZ reaction and measure previously unreported oscillations in their concentrations through Br K-edge XAS, while simultaneously tracking the oscillatory Ce4+-to-Ce3+ transformation by coupling XAS with UV-vis spectroscopy. Our work evidences the potential of the XAS technique to investigate the mechanisms of oscillatory chemical systems whose species are often not detectable with conventional experimental methods.

Electrically tunable non-radiative lifetime in WS2/WSe2 heterostructures.

Van der Waals heterostructures based on transition metal dichalcogenides (TMDs) have emerged as excellent candidates for next-generation optoelectronics and valleytronics, due to their fascinating physical properties. The understanding and active control of the relaxation dynamics of heterostructures play a crucial role in device design and optimization. Here, we investigate the back-gate modulation of exciton dynamics in a WS2/WSe2 heterostructure by combining time-resolved photoluminescence (TRPL) and transient absorption spectroscopy (TAS) at cryogenic temperatures. We find that the non-radiative relaxation lifetimes of photocarriers in heterostructures can be electrically controlled for samples with different twist-angles, whereas such lifetime tuning is not present in standalone monolayers. We attribute such an observation to doping-controlled competition between interlayer and intralayer recombination pathways in high-quality WS2/WSe2 samples. The simultaneous measurement of TRPL and TAS lifetimes within the same sample provides additional insight into the influence of coexisting excitons and background carriers on the photo-response, and points to the potential of tailoring light-matter interactions in TMD heterostructures.

The role of the plasmon in interfacial charge transfer.

The lack of a detailed mechanistic understanding for plasmon-mediated charge transfer at metal-semiconductor interfaces severely limits the design of efficient photovoltaic and photocatalytic devices. A major remaining question is the relative contribution from indirect transfer of hot electrons generated by plasmon decay in the metal to the semiconductor compared to direct metal-to-semiconductor interfacial charge transfer. Here, we demonstrate an overall electron transfer efficiency of 44 ± 3% from gold nanorods to titanium oxide shells when excited on resonance. We prove that half of it originates from direct interfacial charge transfer mediated specifically by exciting the plasmon. We are able to distinguish between direct and indirect pathways through multimodal frequency-resolved approach measuring the homogeneous plasmon linewidth by single-particle scattering spectroscopy and time-resolved transient absorption spectroscopy with variable pump wavelengths. Our results signify that the direct plasmon-induced charge transfer pathway is a promising way to improve hot carrier extraction efficiency by circumventing metal intrinsic decay that results mainly in nonspecific heating.

Restructuring of Palladium Nanoparticles during Oxidation by Molecular Oxygen.

An interplay between Pd and PdO and their spatial distribution inside the particles are relevant for numerous catalytic reactions. Using in situ time-resolved X-ray absorption spectroscopy (XAS) supported by theoretical simulations, a mechanistic picture of the structural evolution of 2.3nm palladium nanoparticles upon their exposure to molecular oxygen is provided. XAS analysis revealed the restructuring of the fcc-like palladium surface into the 4-coordinated structure of palladium oxide upon absorption of oxygen from the gas phase and formation of core@shell Pd@PdO structures. The reconstruction starts from the low-coordinated sites at the edges of palladium nanoparticles. Formation of the PdO shell does not affect the average Pd‒Pd coordination numbers, since the decrease of the size of the metallic core is compensated by a more spherical shape of the oxidized nanoparticles due to a weaker interaction with the support. The metallic core is preserved below 200°C even after continuous exposure to oxygen, with its size decreasing insignificantly upon increasing the temperature, while above 200°C, bulk oxidation proceeds. The Pd‒Pd distances in the metallic phase progressively decrease upon increasing the fraction of the Pd oxide due to the alignment of the cell parameters of the two phases.

Reduced-Toxicity and Highly Luminescent Germanium-Lead Perovskites Enabled by Strain Reduction for Light-Emitting Diodes.

Germanium-lead (Ge-Pb) perovskites provide a promising solution for perovskite optoelectronic devices with reduced toxicity. However, Ge-Pb perovskite light-emitting diodes (PeLEDs) with >30 mol % Ge showed low emission efficiencies [Yang, D.; Zhang, G.; Lai, R.; Cheng, Y.; Lian, Y.; Rao, M.; Huo, D.; Lan, D.; Zhao, B.; Di, D. Germanium-Lead Perovskite Light-Emitting Diodes. Nat. Commun. 2021, 12 (1), 4295]. Here, we apply strain engineering to effectively improve the light emission efficiency and stability of Ge-Pb perovskite films and PeLEDs with 30 and 60 mol % Ge, through A-site modulation. The maximum external quantum efficiencies of the Ge-Pb PeLEDs with 30 and 60 mol % Ge are 8.5% and 3.0% at 3.32 mA cm-2 (∼922 cd m-2) and 0.53 mA cm-2 (∼60 cd m-2), respectively. Time-resolved transient absorption spectroscopy analysis of Ge-Pb perovskite films on different hole-transport layers shows that incorporating 30 mol % Ge into the perovskite with mixed A-site cations can effectively suppress trap-assisted recombination. Further analysis of their current density-voltage (J-V) curves reveals the efficiency loss mechanisms of Ge-Pb PeLEDs with high Ge fractions, indicating the possibility of further improvements.

Ultrafast Events of Photoexcited Iron(III) Chloride for Activation of Benzylic C-H Bonds.

The usage of rare-earth-metal catalysts in the synthesis of organic compounds is widespread in chemical industries but is limited owing to its environmental and economic costs. However, recent studies indicate that abundant-earth metals like iron(III) chloride can photocatalyze diverse organic transformations using blue-light LEDs. Still, the underlying mechanism behind such activity is debatable and controversial, especially in the absence of ultrafast spectroscopic results. To address this urgent challenge, we performed femtosecond time-resolved electronic absorption spectroscopy experiments of iron(III) chloride in selected organic solvents relevant to its photocatalytic applications. Our results show that the long-lived species [Fe(II) ← Cl•]* is primarily responsible for both oxidizing the organic substrate and reducing molecular oxygen through the diffusion process, leading to the final product and regenerating the photocatalyst rather than the most widely proposed free chloride radical (Cl•). Our study will guide the rational design of efficient earth-abundant photocatalysts.

Improving Three-Photon Fluorescence of Near-Infrared Quantum Dots for Deep Brain Imaging by Suppressing Biexciton Decay.

Three-photon fluorescence microscopy (3PFM) is a promising brain research tool with submicrometer spatial resolution and high imaging depth. However, only limited materials have been developed for 3PFM owing to the rigorous requirement of the three-photon fluorescence (3PF) process. Herein, under the guidance of a band gap engineering strategy, CdTe/CdSe/ZnS quantum dots (QDs) emitting in the near-infrared window are designed for constructing 3PF probes. The formation of type II structure significantly increased the three-photon absorption cross section of QDs and caused the delocalization of electron-hole wave functions. The time-resolved transient absorption spectroscopy confirmed that the decay of biexcitons was significantly suppressed due to the appropriate band gap alignment, which further enhanced the 3PF efficiency of QDs. By utilizing QD-based 3PF probes, high-resolution 3PFM imaging of cerebral vasculature was realized excited by a 1600 nm femtosecond laser, indicating the possibility of deep brain imaging with these 3PF probes.

Tracking nuclear motion in single-molecule magnets using femtosecond X-ray absorption spectroscopy

The development of new data storage solutions is crucial for emerging digital technologies. Recently, all-optical magnetic switching has been achieved in dielectrics, proving to be faster than traditional methods. Despite this, single-molecule magnets (SMMs), which are an important class of magnetic materials due to their nanometre size, remain underexplored for ultrafast photomagnetic switching. Herein, we report femtosecond time-resolved K-edge X-ray absorption spectroscopy (TR-XAS) on a Mn(III)-based trinuclear SMM. Exploiting the elemental specificity of XAS, we directly track nuclear dynamics around the metal ions and show that the ultrafast dynamics upon excitation of a crystal-field transition are dominated by a magnetically active Jahn-Teller mode. Our results, supported by simulations, reveal minute bond length changes from 0.01 to 0.05 Å demonstrating the sensitivity of the method. These geometrical changes are discussed in terms of magneto-structural relationships and consequently our results illustrate the importance of TR-XAS for the emerging area of ultrafast molecular magnetism.

Excited-State Identification of a Nickel-Bipyridine Photocatalyst by Time-Resolved X-ray Absorption Spectroscopy.

Photoassisted catalysis using Ni complexes is an emerging field for cross-coupling reactions in organic synthesis. However, the mechanism by which light enables and enhances the reactivity of these complexes often remains elusive. Although optical techniques have been widely used to study the ground and excited states of photocatalysts, they lack the specificity to interrogate the electronic and structural changes at specific atoms. Herein, we report metal-specific studies using transient Ni L- and K-edge X-ray absorption spectroscopy of a prototypical Ni photocatalyst, (dtbbpy)Ni(o-tol)Cl (dtb = 4,4'-di-tert-butyl, bpy = bipyridine, o-tol = ortho-tolyl), in solution. We unambiguously confirm via direct experimental evidence that the long-lived (∼5 ns) excited state is a tetrahedral metal-centered triplet state. These results demonstrate the power of ultrafast X-ray spectroscopies to unambiguously elucidate the nature of excited states in important transition-metal-based photocatalytic systems.

Shock-Tube Measurements of Carbon Monoxide During Combustion of Hydroxyl-Terminated Polybutadiene Products/Air

Hydroxyl-terminated polybutadiene (HTPB) is a fuel proposed for use in hypersonic rockets, specifically in solid fuel ramjets (SFRJs), where it combines with air and undergoes combustion processes that range from fuel pyrolysis to fuel lean- combustion. A better understanding and the improvement of SFRJ combustion can be accomplished through fundamental experiments and computational fluid dynamics modeling. The current chemical-kinetic models need data to capture the reaction kinetics at the conditions under which SFRJs operate. This work focuses on providing combustion data to assess the predictive capabilities of state-of-the-art mechanisms at conditions relevant to SFRJs. The University of Central Florida shock-tube facility was used to conduct experiments of various combinations of HTPB products in air near 5 atm for temperatures ranging from 1100 to 1800 K and Φ=0.5, 1.0, 4.76. Nonintrusive, time-resolved laser absorption spectroscopy was used to record carbon-monoxide-concentration time histories and compared against the predictions of AramcoMech3.0 and HyChem mechanisms. For each mixture, the mid- and high-temperature conditions matched the models well, whereas there was a significant discrepancy for the low-temperature condition. A sensitivity analysis was then conducted to determine which reactions warranted further investigation to address the discrepancy at low temperatures.

Influence of the RF voltage amplitude on the space- and time-resolved properties of RF–LF dielectric barrier discharges in α–γ mode

This work reports the results of an experimental and modeling study on dual-frequency Ar–NH3 dielectric barrier discharges (DBDs) exhibiting the α–γ transition. A combination of space- and time-resolved optical absorption and emission spectroscopy is used to record spatio-temporal mappings of the Ar metastable number density, Ar 750.4 nm line emission intensity, and electron–Ar bremsstrahlung continuum emission intensity. With the increase of the radio frequency (RF) voltage amplitude in a 50 kHz–5 MHz DBD, maximum populations of Ar excited species (1s and 2p states, linked to the population of high-energy electrons) observed in the γ mode decrease and appear earlier in the low-frequency cycle. On the other hand, the density of the bulk electrons, monitored from the continuum emission intensity, increases, with a more prominent rise in the RF-α mode than in the γ regime. Such behaviors are consistent with the predictions of 1D fluid model and results from a decrease of the gas voltage required for self-maintenance of the cathode sheath in the γ breakdown.

Modulation of Photoinduced Phase Segregation and Stress-Driven Nanoscale Cracking in Hybrid Halide Perovskite Solar Cells.

The negative effect of photoinduced halide segregation (PIHS) on the properties of hybrid halide perovskites poses a major obstacle for its future commercial application. Therefore, the in-depth understanding of halide-ion segregation and its causes is an urgent and intractable problem. When PIHS reaches a certain threshold, it will aggravate the deterioration of the film surface morphology and form nanoscale cracks. Herein, the formation mechanism and types of cracks are revealed by exploring the stress distribution in the film. Using the femtosecond time-resolved transient absorption spectroscopy, the ultrafast formation of the iodine rich phase is observed, which appears earlier than the bromine rich phase. In addition, the introduction of organic ligand didodecyldimethylammonium bromide can significantly inhibit PIHS and improve the surface morphology of the film, which can promote the device efficiency from 9.63 to 11.20%. This work provides a novel perspective for the exploration of the PIHS.

Near-IR-Absorbing Bis-Donor Functionalized Aza-BODIPY Derivatives: Synthesis and Photophysical Study by Using Transient Optical Spectroscopy.

A series of near-IR absorbing 2,6-diarylated BF2-chelated aza-boron-dipyrromethenes (aza-BDPs) derivatives bearing different electron donors (benzene, naphthalene, phenanthrene, phenothiazine and carbazole) were designed and synthesized. The effect of different electron donor substitutions on the photophysical properties was studied by steady-state UV-vis absorption and fluorescence spectra, electrochemical, time-resolved nanosecond transient absorption (ns-TA) spectroscopy and theoretical computations. The UV-vis absorption spectra of AzaBDP-PTZ and AzaBDP-CAR (λabs=710 nm in toluene) showed a bathochromic absorption profile compared with the reference AzaBDP-Ph (λabs=685 nm in toluene), indicating the non-negligible electronic interaction at the ground state between donor and acceptor moieties. Moreover, the fluorescence is almost completely quenched for AzaBDP-PTZ/AzaBDP-CAR (fluorescence quantum yield, ΦF=0.2-0.7 % in toluene) as compared with the AzaBDP-Ph (ΦF=27 % in toluene). However, the apparent intersystem crossing ability of these compounds is poor, based on the singlet oxygen quantum yield (ΦΔ=0.3-1.5 %). The ns-TA spectral study showed typical Bodipy localized triplet state transient features, short-lived excited triplet state for AzaBDP-Ph (τT=53.2 μs) versus significantly long-lived triplet state for AzaBDP-CAR (τT=114 μs) was observed under deaerated experimental conditions. These triplet state lifetimes are much longer than that obtained with diiodoAzaBDP (intramolecular heavy atom effect, τT=1.5~7.2 μs). These information are useful for molecular structure design of triplet photosensitizers, for which longer triplet state lifetimes are usually desired. Theoretical computations displayed that the triplet state is mainly localized on the AzaBDP core, moreover, it was found that the HOMO/LUMO energy gap decreased after introducing donor moieties to the skeleton as compared with the reference.

Halide Engineering in Mixed Halide Perovskite-Inspired Cu2AgBiI6 for Solar Cells with Enhanced Performance.

Cu2AgBiI6 (CABI) is a promising perovskite-inspired absorber for solar cells due to its direct band gap and high absorption coefficient. However, the nonradiative recombination caused by the high extrinsic trap density limits the performance of CABI-based solar cells. In this work, we employ halide engineering by doping bromide anions (Br-) in CABI thin films, in turn significantly improving the power conversion efficiency (PCE). By introducing Br- in the synthetic route of CABI thin films, we identify the optimum composition as CABI-10Br (with 10% Br at the halide site). The tailored composition appears to reduce the deep trap density as shown by time-resolved photoluminescence and transient absorption spectroscopy characterizations. This leads to a dramatic increase in the lifetime of charge carriers, which therefore improves both the external quantum efficiency and the integrated short-circuit current. The photovoltaic performance shows a significant boost since the PCE under standard 1 sun illumination increases from 1.32 to 1.69% (∼30% relative enhancement). Systematic theoretical and experimental characterizations were employed to investigate the effect of Br- incorporation on the optoelectronic properties of CABI. Our results highlight the importance of mitigating trap states in lead-free perovskite-inspired materials and that Br- incorporation at the halide site is an effective strategy for improving the device performance.

Kinetics of the Gas-Phase Reactions of syn- and anti-CH3CHOO Criegee Intermediate Conformers with SO2 as a Function of Temperature and Pressure.

Kinetics of reactions between SO2 and CH3CHOO Criegee intermediate conformers have been measured at temperatures between 242 and 353 K and pressures between 10 and 600 Torr using laser flash photolysis of CH3CHI2/O2/N2/SO2 gas mixtures coupled with time-resolved broadband UV absorption spectroscopy. The kinetics of syn-CH3CHOO + SO2 are pressure-dependent and exhibit a negative temperature dependence, with the observed pressure dependence reconciling apparent discrepancies between previous measurements performed at ∼298 K. Results indicate a rate coefficient of (4.80 ± 0.46) × 10-11 cm3 s-1 for the reaction of syn-CH3CHOO with SO2 at 298 K and 760 Torr. In contrast to the behavior of the syn-conformer, the kinetics of anti-CH3CHOO + SO2 display no significant dependence on temperature or pressure over the ranges investigated, with a mean rate coefficient of (1.18 ± 0.21) × 10-10 cm3 s-1 over all conditions studied in this work. Results indicate that the reaction of syn-CH3CHOO with SO2 competes with unimolecular decomposition and reaction with water vapor in areas with high SO2 concentration and low humidity, particularly at lower temperatures.

Shell thickness influence on the carrier dynamics of InP/ZnS QDs

InP/ZnS core/shell quantum dots (QDs) have been widely applied in many fields due to their excellent luminescence performance. In this study, the correlation between the ZnS shell thickness and the ultrafast carrier dynamics in InP/ZnS QDs was investigated by using femtosecond time-resolved transient absorption spectroscopy and time-resolved photoluminescence techniques. We found that a thicker ZnS shell could confine more carriers to the InP core, thus effectively weakening the interactions between the carriers in the core and the interfacial defect states; this further enhanced the quantum yields and photoluminescence properties in InP/ZnS QDs.

Efficient prediction of attosecond two-colour pulses from an X-ray free-electron laser with machine learning

X-ray free-electron lasers are sources of coherent, high-intensity X-rays with numerous applications in ultra-fast measurements and dynamic structural imaging. Due to the stochastic nature of the self-amplified spontaneous emission process and the difficulty in controlling injection of electrons, output pulses exhibit significant noise and limited temporal coherence. Standard measurement techniques used for characterizing two-coloured X-ray pulses are challenging, as they are either invasive or diagnostically expensive. In this work, we employ machine learning methods such as neural networks and decision trees to predict the central photon energies of pairs of attosecond fundamental and second harmonic pulses using parameters that are easily recorded at the high-repetition rate of a single shot. Using real experimental data, we apply a detailed feature analysis on the input parameters while optimizing the training time of the machine learning methods. Our predictive models are able to make predictions of central photon energy for one of the pulses without measuring the other pulse, thereby leveraging the use of the spectrometer without having to extend its detection window. We anticipate applications in X-ray spectroscopy using XFELs, such as in time-resolved X-ray absorption and photoemission spectroscopy, where improved measurement of input spectra will lead to better experimental outcomes.