Tibial Defects Research Articles

Refinement in Post-Operative Care for Orthopaedic Models: Implementing a Sheep Walking Cast (SWC) for Effective Tibial Fracture Management.

In the healthcare system, lower leg fractures remain relevant, incurring costs related to surgical treatment, hospitalization, and rehabilitation. The duration of treatment may vary depending on the individual case and its severity. Casting as a post-surgical fracture treatment is a common method in human and experimental veterinary medicine. Despite the high importance of sheep in preclinical testing materials for osteosynthesis, there is no standardised cast system ensuring proper stabilisation and functionality of hind limbs during the healing of tibia fractures or defects. Existing treatment approaches for tibial osteosynthesis in laboratory animal science include sling hanging, external fixators, or former Achilles tendon incision. These methods restrict animal movement for 4-6 weeks, limit species-typical behaviour, and impact social interactions. Our pilot study introduces a Standardised Walking Cast (SWC) for sheep, enabling immediate physiological movement post surgery. Seven Rhone sheep (female, 63.5 kg ± 6.45 kg) each with a single tibia defect (6 mm mechanical drilled defect) underwent SWC application for 4 weeks after plate osteosynthesis. The animals bore weight on their operated leg from day one, exhibiting slight lameness (grade 1-2 out of 5). Individual step lengths showed good uniformity (average deviation: 0.89 cm). Group housing successfully started on day three after surgery. Weekly X-rays and cast changes ensured proper placement, depicting the healing process. This study demonstrates the feasibility of using an SWC for up to 72 kg of body weight without sling hanging via ceiling mounting or external fixation techniques. Allowing species-typical movement and social behaviour can significantly improve the physiological behaviour of sheep in experiments, contributing to refinement.

Biomechanical evaluation of screw and cement placement strategies for treating medial uncontained tibial defects in total knee arthroplasty: A finite element analysis.

Total knee arthroplasty faces challenges in the management of medial uncontained tibial defects, affecting prosthesis stability and implant survival. The use of screws and bone cement is a preferred approach; however, optimal screw insertion techniques lack consensus in the existing literature. The present study aimed to address this gap by exploring optimal screw and cement placement strategies, focusing on their biomechanical implications. The present study conducted a finite element analysis using a knee prosthesis model with a defined uncontained tibial defect. Various parameters were systematically adjusted, including the number of screws (1, 2 or 3 screws), screw lengths (10, 18, 30 or 40 mm), lateral-medial screw positions (2, 4 or 6 mm laterally) and abduction rotation angles (0, 5, 10 or 15 degrees). These adjustments were made to evaluate their specific and combined impacts on the vertical displacement and abduction angles of the tibial tray. The results revealed that incorporating three-screw reinforcement markedly reduced vertical displacement, while the single screw in the middle position exhibited superior performance in preventing the deformation of abduction angles compared to scenarios with two screws at anterior and posterior positions without a middle screw. Longer screws and smaller abduction angles contributed to decreased movement of the tibial component. Furthermore, the lateral adjustment of the screw position led to an increase in vertical displacement values, reaching ~1.5% when shifted 6 mm laterally. On the whole, the finite element analysis in the present study suggests that, for the treatment of medial uncontained tibial defects, three-screw reinforcement is advantageous for larger defects. Longer screws and a smaller abduction angle are deemed favorable. Moreover, the results underscore the superiority of medial screw placement over lateral placement. It is imperative to note that further clinical validation is essential to corroborate the biomechanical implications observed herein.

Imaging in revision total knee arthroplasty: A novel 3D classification system for tibial bone defects.

The primary purpose of the study was to use pre-revision total knee arthroplasty (TKA) computer-tomography (CT)-images to analyse typical tibial bone defects and create a new schematic three-dimensional (3D)-classification system. The secondary purpose was to investigate the association between defect size and implant selection at the time of revision surgery. Eighty-four patients with preoperative CT-scans underwent revision of a primary TKA. CT-image segmentation with the 3D-Slicer Software was performed retrospectively, and a new three-dimensional classification system was used to grade tibial bone defects. The location of tibial bone defects was recorded for all cases. Volumetric 3D bone defect measurements were used to investigate the association between the bone defect volume, the indication for rTKA, and the use of modular revision components. The t-test, the Mann-Whitney-U test, and the Fisher's exact-test were used for group comparisons, and the Kruskal-Wallis test was used for multiple group comparisons. The most common anatomic regions for both contained and uncontained tibial bone defects were the anteromedial epiphysis (N = 50; mean epiphyseal-defect: 5.9 cm³) and metaphysis (N = 15; mean metaphyseal-defect: 9.6 cm³). A significant association was found between patients with preoperative metaphyseal defects (N = 22) and the use of tibial augments (N = 7) (p = 0.04). The use of cones/sleeves was associated with a significantly increased 3D-CT volume of the preoperative metaphyseal bone defects (p = 0.04). Patients with osteoporosis had significantly larger volumetric defects in the metaphysis (p = 0.01). Our results emphasise the importance of considering the three-dimensional nature of tibial defects in rTKA. The findings suggest that an understanding of the volume of the defect size through CT imaging can predict the need for augments and cones/sleeves and, especially in patients with osteoporosis can help the surgeon identify larger metaphyseal defects and ensure optimal metaphyseal fixation through appropriate implant selection. Level III, retrospective cohort study.

Artificial Deformity Creation as a Method for Limb Salvage for Patients with Massive Tibial and Soft Tissue Defects: A Report of 26 Cases.

Twenty-six adult patients (age range 20-81 years) with soft tissue defects of the lower limb were treated at the Riga East University Hospital from 2018 to 2021. All patients were treated using the ADCr method which is the technique of establishing an interim deformity for resolving tissue loss. The lower extremity functional scale (LEFS) and application of methods of ilizarov (ASAMI) criteria were used for the evaluation of bone healing and lower extremity function. Complete union was achieved in all cases. The functional evaluation showed that most patients could achieve excellent and good results and return to activities of daily living. The functional result was poor in one case of a multi-fragmentary distal tibial articular fracture for which an ankle fusion was performed. Final union in this case was achieved with some residual deformity. The method of ADCr is an effective surgical technique in cases of severe tibial injuries with concomitant loss of bone and soft tissues. This method could be used in cases when either a plastic or microsurgeon is not available or for instances when closing the defect with a flap is either impossible or contraindicated. Excellent and good functional results are possible without severe complications. Plotnikovs K, Kamenska J, Movcans J, et al. Artificial Deformity Creation as a Method for Limb Salvage for Patients with Massive Tibial and Soft Tissue Defects: A Report of 26 Cases. Strategies Trauma Limb Reconstr 2023;18(3):133-139.

Bioactive VS4-based sonosensitizer for robust chemodynamic, sonodynamic and osteogenic therapy of infected bone defects

BackgroundMost bone defects caused by bone disease or trauma are accompanied by infection, and there is a high risk of infection spread and defect expansion. Traditional clinical treatment plans often fail due to issues like antibiotic resistance and non-union of bones. Therefore, the treatment of infected bone defects requires a strategy that simultaneously achieves high antibacterial efficiency and promotes bone regeneration.ResultsIn this study, an ultrasound responsive vanadium tetrasulfide-loaded MXene (VSM) Schottky junction is constructed for rapid methicillin-resistant staphylococcus aureus (MRSA) clearance and bone regeneration. Due to the peroxidase (POD)-like activity of VS4 and the abundant Schottky junctions, VSM has high electron–hole separation efficiency and a decreased band gap, exhibiting a strong chemodynamic and sonodynamic antibacterial efficiency of 94.03%. Under the stimulation of medical dose ultrasound, the steady release of vanadium element promotes the osteogenic differentiation of human bone marrow mesenchymal stem cells (hBMSCs). The in vivo application of VSM in infected tibial plateau bone defects of rats also has a great therapeutic effect, eliminating MRSA infection, then inhibiting inflammation and improving bone regeneration.ConclusionThe present work successfully develops an ultrasound responsive VS4-based versatile sonosensitizer for robust effective antibacterial and osteogenic therapy of infected bone defects.

Photobiomodulation Therapy Improves Repair of Bone Defects Filled by Inorganic Bone Matrix and Fibrin Heterologous Biopolymer.

Biomaterials are used extensively in graft procedures to correct bone defects, interacting with the body without causing adverse reactions. The aim of this pre-clinical study was to analyze the effects of photobiomodulation therapy (PBM) with the use of a low-level laser in the repair process of bone defects filled with inorganic matrix (IM) associated with heterologous fibrin biopolymer (FB). A circular osteotomy of 4 mm in the left tibia was performed in 30 Wistar male adult rats who were randomly divided into three groups: G1 = IM + PBM, G2 = IM + FB and G3 = IM + FB + PBM. PBM was applied at the time of the experimental surgery and three times a week, on alternate days, until euthanasia, with 830 nm wavelength, in two points of the operated site. Five animals from each group were euthanized 14 and 42 days after surgery. In the histomorphometric analysis, the percentage of neoformed bone tissue in G3 (28.4% ± 2.3%) was higher in relation to G1 (24.1% ± 2.91%) and G2 (22.2% ± 3.11%) at 14 days and at 42 days, the percentage in G3 (35.1% ± 2.55%) was also higher in relation to G1 (30.1% ± 2.9%) and G2 (31.8% ± 3.12%). In the analysis of the birefringence of collagen fibers, G3 showed a predominance of birefringence between greenish-yellow in the neoformed bone tissue after 42 days, differing from the other groups with a greater presence of red-orange fibers. Immunohistochemically, in all experimental groups, it was possible to observe immunostaining for osteocalcin (OCN) near the bone surface of the margins of the surgical defect and tartrate-resistant acid phosphatase (TRAP) bordering the newly formed bone tissue. Therefore, laser photobiomodulation therapy contributed to improving the bone repair process in tibial defects filled with bovine biomaterial associated with fibrin biopolymer derived from snake venom.

Methacrylated gelatin and platelet-rich plasma based hydrogels promote regeneration of critical-sized bone defects.

Physiological repair of large-sized bone defects requires instructive scaffolds with appropriate mechanical properties, biocompatibility, biodegradability, vasculogenic ability and osteo-inductivity. The objective of this study was to fabricate in situ injectable hydrogels using platelet-rich plasma (PRP)-loaded gelatin methacrylate (GM) and employ them for the regeneration of large-sized bone defects. We performed various biological assays as well as assessed the mechanical properties of GM@PRP hydrogels alongside evaluating the release kinetics of growth factors (GFs) from hydrogels. The GM@PRP hydrogels manifested sufficient mechanical properties to support the filling of the tissue defects. For biofunction assay, the GM@PRP hydrogels significantly improved cell migration and angiogenesis. Especially, transcriptome RNA sequencing of human umbilical vein endothelial cells and bone marrow-derived stem cells were performed to delineate vascularization and biomineralization abilities of GM@PRP hydrogels. The GM@PRP hydrogels were subcutaneously implanted in rats for up to 4 weeks for preliminary biocompatibility followed by their transplantation into a tibial defect model for up to 8 weeks in rats. Tibial defects treated with GM@PRP hydrogels manifested significant bone regeneration as well as angiogenesis, biomineralization, and collagen deposition. Based on the biocompatibility and biological function of GM@PRP hydrogels, a new strategy is provided for the regenerative repair of large-size bone defects.

A Novel Approach to Total Ankle Arthroplasty with Simultaneous Structural Tibial Cut Autograft for Anterior Tibial Bone Defects.

Severe bone defects pose a clinical challenge in total ankle arthroplasty (TAA) and are frequently considered contraindicated. We introduce an innovative approach that utilizes a structural tibial cut autograft to address anterior distal tibia bone defects during TAA. This technique is a viable alternative to employing revision TAA systems or resorting to excessively high tibial cuts. Furthermore, it facilitates achieving favorable sagittal alignment and ensures adequate fixation strength of the tibial component.

Can silver nanoparticles stabilized by Fenugreek (Trigonella foenm -graecum) improve tibial bone defects repair in rabbits? A preliminary study

Background: A fracture is considered a medical emergency leading to considerable complications. Aim: This study aimed to describe the accelerating action of Ag-NPs-FG on fracture healing in rabbits. Methods: AgNPs were reduced with FG, loaded into a starch gel base, and investigated for their morphology, size, and charge. Four equal groups were randomly formed of 40 adult male rabbits. A 3.5 mm diameter bone defect was created at the proximal metaphysis the right tibia in each rabbit. Groups 1 to 4 were injected with placebo saline, AgNPs-FG, plain gel, and FG-gel at the bone defect zone, respectively. The healing was assessed for 8 weeks postoperatively based on the radiographic, bone turnover markers, and histopathological examinations. Results: The AgNPs-FG was obtained as a faint reddish color, spherical in shape, with an absorbance of 423 nm, a size of 118.0±1.7 nm, and a surface charge of -7.8±0.518 mV. The prepared AgNPs-FG hydrogel was clear, translucent, and homogenous. The pH values were 6.55-6.5±0.2, the viscosity of 4000 and 1875 cPs, and spreadability of 1.6±0.14 and 2.0±0.15 for both FG and AgNPs-FG hydrogel, respectively. Radiographic union scale was significantly (p<0.05) improved in group 2 with significant (P < 0.05) increase of bone turnover markers was found in comparison to other treated groups. Histopathological examination revealed the formation of mature bone on the 28th postoperative day in groups 2 and 4. Conclusion: Colloidal nano-formulation of AgNPs-FG loaded hydrogel could be a promising formulation to accelerate rabbits' tibial bone healing process.

Construction of microstructure and nutrient transport properties of tibial segmental implant prosthesis

Segmental tibial bone defects caused by bone tumors, open fractures, and non-union of large bone segments are one of the challenges in orthopedic diseases. In existing research on load-bearing implants, it has been found that stress mismatch at the bone/implant interface leading to implant loosening and biological instability due to limited depth of bone ingrowth are key obstacles to the development of tibial implants. Therefore,In this study, the mechanical properties and internal fluid properties of three existing bone scaffold microstructures were investigated by finite element analysis.Based on the requirements of tibial segmental bone defect scaffolds, a composite scaffold with a GDP pore structure is prepared. The stress transmission mechanism of its microstructure model and the influence of internal scaffold microstructure on the transport of nutrients are studied. The newly proposed GDP pore structure is suitable for segmental bone defects similar to the tibial diaphysis.

GMK rotating hinge prosthesis. A valid option for complex revision knee prosthetic surgery

revision joint replacement surgery presents a surgical challenge. The use of rotating hinge prostheses is an option in patients with femorotibial bone defects, ligament insufficiency, or significant deformities. The aim of this study was to evaluate the clinical, functional, and radiological outcomes of a series of patients who underwent surgery using the GMK Hinge (Medacta®) rotational hinge model. a descriptive, retrospective, and analytical study was conducted on a series of 36 patients, with a mean age of 72.5 years (47-85), operated on by the same surgical team between January 2015 and January 2022. The etiology of revision was chronic infection in 38.9% of cases, instability in 33.3%, aseptic loosening in 19.4%, and stiffness in 8.4%. The Knee Society Score (KSS) and the Forgotten Joint Score (FJS) were used to assess functional outcomes. The degree of femorotibial bone defect was evaluated using the Anderson Orthopaedic Research Institute (AORI) classification. Postoperative complications are also recorded. a total of 36 patients, 17 males and 19 females, were included, with a mean follow-up of 30 months (12-66). Twelve patients had type 1 defects, ten had 2A defects, ten had 2B defects, and two had type 3 defects on the femoral side, with the use of wedges required for asymmetrical defects (21 patients). The predominant tibial defect was type 1 without the need for wedges. The majority achieved a satisfactory outcome on the KSS scale (72.2 ± 9.4), with significant differences compared to the previous KSS (54.3 ± 8.9). A score of 31 (12-67) was also obtained on the FJS scale. Postoperative complications were present in 16.7% of patients. complex prosthetic revision surgery using a rotating hinge prosthesis represents a suitable therapeutic option, yielding appropriate clinical and functional outcomes, albeit not without complications.

Construction of a layer-by-layer self-assembled rosemarinic acid delivery system on the surface of CFRPEEK implants for enhanced anti-inflammatory and osseointegration activities.

Carbon fiber-reinforced polyether ether ketone (CFRPEEK) implants have attracted widespread attention in the field of clinical bone defect repair. However, the surface bioinertness confines the application of CFRPEEK implants. Inspired by the study of rosmarinic acid (RA)-promoted osteogenic differentiation, a self-assembly surface modification method based on electrostatic interactions, involving deposition of sodium carboxymethyl cellulose/chitosan and rosmarinic acid layer by layer on the surface of poly-L-lysine modified hydroxy CFRPEEK (SCPP/CC5@RA), is proposed to introduce RA on the surface of CFRPEEK for bioactivation. After layer-by-layer self-assembly (LBL), the surface of SCPP/CC5@RA exhibits weak electrophoresis (11.43 eV), suitable hydrophilicity, and bioactivity. The results of in vitro studies indicate that the RA release behavior of SCPP/CC5@RA effectively regulates the immune-inflammatory response and promotes the differentiation of osteoblasts. The rapid release of RA (0.17 μg mL-1) in the initial stage can downregulate the secretion of inflammation-related cytokines and significantly reduce oxidative stress levels; the sustained release of RA (0.06 μg mL-1) in the late stage can upregulate the expression of osteogenesis-related genes and induce mineralization of osteoblasts. Moreover, the rabbit tibia defect model demonstrates that the LBL technique can enhance the osseointegration of CFRPEEK implants. Compared with the control group, the bone trabecular thickness of the SCPP/CC5@RA group increases by 1.36 times, and the maximum pushing force increases by 2.67 times. In summary, this study provides a promising LBL based RA delivery system for the development of a dual-functional CFRPEEK implant in the field of bone implant biomaterials.

Biogran Grafting in Rat Tibia Defects - A Model of High Bone Metabolism Site

Biogran Grafting in Rat Tibia Defects - A Model of High Bone Metabolism Site

Comparison of Two Surgical Techniques Based on the Semitendinosus Myocutaneous Flap in Cats.

The objective of this experimental study was to compare the semitendinosus (ST) to the split-semitendinosus (SST) myocutaneous flap in covering distal limb skin defects in cats. Twenty-eight purpose-bred laboratory DSH cats were used and allocated into two groups (ST-group (A); n = 14, SST-group (B); n = 14). ST flaps, based on the distal muscle pedicle, and SST flaps, after longitudinal division of the muscle based on both muscle pedicles, were tested over skin defects created on the medial distal tibia. Clinical assessment, planimetry, CT-angiography (CTA) and histological examination were compared between groups. Days to complete flap healing between ST and SST-flaps (30.36 ± 9.1, 32.29 ± 5.44, respectively) and final total flap areas (68.36% ± 27.18, 51.83% ± 22.48, respectively) revealed no significant differences. On CTAs, the caliber of the distal caudal femoral vein on day 10 was statistically significant higher (p < 0.001) for group A and a significantly higher caliber of the distal caudal femoral artery on day 30 for group B (p = 0.021). Histology revealed statistically higher degeneration at 6 months (p = 0.047) for group A, and statistically higher fibrosis at 12 months (p = 0.019) for group B. Both ST and SST flaps had similar healing times and provided coverage of skin tibial defects in cats.

Long-term results of oncological endoprosthetics of the ankle joint: multicenter study

Introduction. The distal tibia and fibula are rare sites of involvement by primary and metastatic tumors. For a long time, amputation remained the standard surgical intervention for this location. Oncological ankle replacement is associated with a number of difficulties, including a lack of soft tissue necessary to cover the implant, close proximity of anatomical structures, a high probability of vascular and infectious complications, and difficulties in restoring the biomechanics of the lost joint. Currently, due to the small number of analyzed groups and short-term observations, there is no generalized data on primary and revision oncological ankle replacement, and there is no developed approach to treatment and prevention of complications.Aim. To generalize the analysis of long-term results, the structure of complications, and functional results in a group of patients after primary and revision oncological ankle replacement in a statistically significant group of patients.Materials and methods. The study included 40 patients with benign bone tumors, primary localized sarcomas of bone and soft tissue, and metastatic lesions, which, since 2008, until 2023 56 primary and revision endoprosthetics of postresection defect of the distal tibia were performed. Over a period of 15 years, the study group included 40 (71.4 %) surgeries in the scope of primary endoprosthetics and 16 (28.6 %) surgeries in the scope of revision oncological endoprosthetics of the ankle joint.Results. Over a 15-year follow-up period, the overall incidence of complications, structured according to the International Society of limb Salvage (ISOLS) 2013 classification, after primary and revision arthroplasty was 50 %. The average time until detection of oncological and non-oncological complications was 16.1 months. The leading complication after endoprosthetics was aseptic instability (Type II; 21.4 %) and tumor recurrence (Type V) – 20 %. The average functional outcome after primary and revision ankle replacement was assessed using the MSTS scale and was 72 % after 6 months and ranged from 43 to 97 %. After 12 months, this figure was 78 % and ranged from 49 to 97 %.Conclusion. An objective assessment and increase in the statistical reliability of the results of oncological ankle replacement requires a larger number of surgeries, a longer observation period and joint consolidation of data from various clinics. Development of indications for such reconstructive operations, careful selection of patients taking into account the effect of conservative treatment allows to reduce the total number of complications, the number of local relapses and achieve a good functional result.

An osteoporosis bone defect regeneration strategy via three-dimension short fibers loaded with alendronate modified hydroxyapatite

Osteoporotic bone defect has become clinic challenge due to its morbid bone microenvironment. Overactive bone resorption and limited bone formation lead to unstable combination between bone tissue and scaffolds. Electrospinning has been widely used in guide tissue membrane, but its barrier property results in limited application. In order to optimize the structure and add anti-bone resorption function of electrospinning fibers, we exploited the application of short fibers generated by homogenization at osteoporotic tibial bone defect. The modified nano-hydroxyapatite (m-HA) was loaded with alendronate. It overcame the problem that hydrophilic drugs were difficult to distribute uniformly in hydrophobic fibers. We confirmed that m-HA was loaded into polycaprolactone (PCL) short fibers. PCL short fibers with m-HA (PCL/m-HA) continuously released ALN, provided stable structure and showed good cytocompatibility. In vitro, PCL/m-HA increased the activity of alkaline phosphatase (ALP), promoted extracellular matrix mineralization and upregulated the expression of osteogenesis-related genes, Col 1, Alp, osteopontin (Opn) and runt-related transcription factor 2 (Runx2). In vivo, PCL/m-HA short fibers accelerated the new bone formation, inhibited the bone resorption and rebalanced the bone microenvironment through regulating osteoprotegerin (OPG) /receptor activator of NF-kB (RANKL) ratio. The above results confirmed that the PCL/m-HA short fibers achieved the application of three-dimension osteoporotic bone defect and had potential prospects in bone tissue scaffolds.

Docking site complications analysis of Ilizarov bone transport technique in the treatment of tibial bone defects

BackgroundTreating long bone defects of the extremities caused by trauma, infection, tumours, and nonunion has been challenging for clinical orthopaedic surgeons. Bone transport techniques have the potential to treat bone defects. However, inevitable docking site complications related to bone transport techniques have been reported in many studies. The purpose of this study was to investigate the risk factors associated with docking site complications in patients who underwent the Ilizarov bone transport technique for the treatment of tibial bone defects.MethodsThis retrospective study included 103 patients who underwent bone transport for the treatment of large bone defects in the tibia from October 2012 to October 2019. Patient demographic data, complications and clinical outcomes after a minimum of 2 years of follow-up were collected and retrospectively analysed. Additionally, univariate analysis and logistic regression analysis were used to analyse the factors that may affect the development of docking site complications in patients with tibial bone defects treated with the Ilizarov bone transport technique. The clinical outcomes were evaluated using the Association for the Study and Application of the Ilizarov criteria (ASAMI) at the last clinical follow-up.ResultsAll 103 patients with an average follow-up of 27.5 months. The docking site complications rate per patient was 0.53, and delayed union occurred in 22 cases (21.4%), axial deviation occurred in 19 cases (18.4%) and soft tissue incarceration occurred in 10 cases (9.7%). According to the results of the logistic regression analysis, the bone defect length (P = 0.001, OR = 1.976), and bone defect of distal 1/3 (P = 0.01, OR = 1.976) were significantly correlated with delayed union. Bone defect length (P < 0.001, OR = 1.981) and external fixation time (P = 0.012, OR = 1.017) were significantly correlated with axial deviation. Soft tissue defects (P = 0.047, OR = 6.766) and the number of previous operations (P = 0.001, OR = 2.920) were significantly correlated with soft tissue incarceration. The ASAMI bone score at the last follow-up showed a rate of excellent and good bone results of 95.1% and a rate of excellent functional results of 90.3%.ConclusionThe Ilizarov bone transport technique is a practical and effective method for the treatment of tibial bone defects. However, the incidence of complications at the docking site is high, of which bone defect length, external fixation time, the number of previous operations, soft tissue defects and the bone defect of distal 1/3 are statistically significantly associated with the occurrence of docking site complications.

Ilizarov method and its combined methods in the treatment of long bone defects of the lower extremity: systematic review and meta-analysis

BackgroundIlizarov method has become one of primary methods for treating bone defects. Currently, there is growing trend in the application of modified Ilizarov methods (e.g., applying unilateral external fixators or with flap tissue) and its combined methods (e.g., Ilizarov method with antibiotic spacer or internal fixation) to manage bone defects. However, there is a lack of studies with systematical evaluation of the clinical effects of these evolving methods. This study aimed to conduct a systematic review and meta-analysis for overall evaluating the clinical effects on long bone defects of lower extremity in Ilizarov methods and its combined methods.MethodsStudies were identified in three electronic databases (Pubmed, Embase and Cochrane Library) from the earliest indexing year through November 01, 2022, and relevant data were extracted subsequently. The total number of participants, number of participants with bone unions, bone result or functional result, and related complications including pin infection, pin loosening, pain, refracture, limb discrepancy, malalignment, joint stiffness, recurrent infection, and amputation were extracted in this study. Then, union rate (defined as the proportion of patients who achieved bone unions) and specific complication incidence rate (defined as the proportion of patients who experienced specific complication) were pooled estimated respectively. Relative risk (RR) was used for comparing the clinical effects among various Ilizarov technique.ResultsSixty-eight case series studies, 29 comparative studies, and 3 randomized clinical trials were finally included. The union rate of Ilizarov methods was 99.29% (95% CI: 98.67% ~ 99.86%) in tibial defects and 98.81% (95% CI: 98.81% ~ 100.00%) in femoral defects. The union rate of Ilizarov method with antibiotic spacer and intramedullary nail in tibial defects was 99.58% (95% CI: 98.05% ~ 100.00%) and 95.02% (95% CI: 87.28% ~ 100.00%), respectively. Compared to the Ilizarov methods, the union rate of the Ilizarov method with antibiotic spacer in tibial defects increased slightly (RR = 1.02, 95% CI: 1.01 ~ 1.04). Meanwhile, compared to Ilizarov methods, we found lower excellent rate in bone result in Ilizarov method with antibiotic spacer, with the moderate to high heterogeneity. Compared to the Ilizarov method, lower rate of pin infection, higher rate of recurrent infection and amputation were observed in Ilizarov method with intramedullary nail, however, the findings about the comparison of pin infection and recurrent infection between the two groups were presented with high degree of statistical heterogeneity.ConclusionOur study confirmed the reliable treatment of Ilizarov methods and its combined technique on long bone defects, and founded there were significant differences on some complications rate between Ilizarov methods and its combined technique. However, the findings need to be confirmed by further studies.

Anatomic study and clinical application of iliac crest chimeric tissue flap

To conduct anatomical study on the iliac crest chimeric tissue flap and summarize its effectiveness of clinical application in repairing limb wounds. Latex perfusion and anatomical study were performed on 6 fresh adult cadaver specimens with 12 sides, to observe the initial location, distribution, quantity, and direction of the common circumflexa iliac artery, the deep circumflexa iliac artery, and the superficial circumflexa iliac artery, and to measure their initial external diameter. Between December 2020 and September 2022, the iliac crest chimeric tissue flap repair was performed on 5 patients with soft tissue of limbs and bone defects. There were 3 males and 2 females, with an average age of 46 years (range, 23-60 years). Among them, there were 3 cases of radii and skin soft tissue defects and 2 cases of tibia and skin soft tissue defects. The length of bone defects was 4-8 cm and the area of skin soft tissue defects ranged from 9 cm×5 cm to 15 cm×6 cm. The length of the iliac flap was 4-8 cm and the area of skin flap ranged from 12.0 cm×5.5 cm to 16.0 cm×8.0 cm. The donor sites were directly sutured. Anatomical studies showed that there were 10 common circumflex iliac arteries in 5 specimens, which originated from the lateral or posterolateral side of the transition between the external iliac artery and the femoral artery, with a length of 1.2-1.6 cm and an initial external diameter of 0.8-1.4 mm. In 1 specimen without common circumflexa iliac artery, the superficial and deep circumflex iliac arteries originated from the external iliac artery and the femoral artery, respectively, while the rest originated from the common circumflex iliac artery. The length of superficial circumflex iliac artery was 4.6-6.7 cm, and the initial external diameter was 0.4-0.8 mm. There were 3-6 perforator vessels along the way. The length of deep circumflex iliac artery was 7.8-9.2 cm, and the initial external diameter was 0.5-0.7 mm. There were 3-5 muscular branches, 4-6 periosteal branches, and 2-3 musculocutaneous branches along the way. Based on the anatomical observation results, all iliac crest chimeric tissue flaps were successfully resected and survived after operation. The wounds at recipient and donor sites healed by first intention. All patients were followed up 8-24 months, with an average of 12 months. The tissue flap has good appearance and soft texture. X-ray film reexamination showed that all the osteotomy healed, and no obvious bone resorption was observed during follow-up. The common circumflex iliac artery, deep circumflex iliac artery, and superficial circumflex iliac artery were anatomically constant, and it was safe and reliable to use iliac crest chimeric tissue flap in repairing the soft tissue and bone defects of limbs.

Complications analysis of Ilizarov bone transport technique in the treatment of tibial bone defects–a retrospective study of 199 cases

BackgroundThe clinical treatment of long bone defets in the extremities caused by trauma, infection, tumours, and nonunion has been a challenge for orthopaedic surgeons. Bone transport techniques have become the only way to treat such bone defects. However, inevitable difficulties and complications related to bone transport techniques have been reported in many studies.AimThe purpose of this study was to investigate the risk factors for complications and the effectiveness of the Ilizarov bone transport technique in the treatment of tibial bone defects.MethodsThe study was conducted in 199 patients who underwent treatment with the Ilizarov bone transport technique at our institution from May 2012 to September 2019. Patient demographic data, complications and clinical outcomes after a minimum of 2 years of follow-up were collected and retrospectively analysed. Additionally, a risk factor analysis was performed for the top three major complications. The clinical outcomes were evaluated using the Association for the Study and Application of the Method of Ilizarov (ASAMI) criteria at the last clinical follow-up.ResultsA total of 199 patients underwent follow-up for 12–40 months, with an average of 23.5 months, and all achieved bone healing. A total of 310 complications occurred, with an average of 1.04 minor complications and 0.48 major complications per patient. The top three complications were pin tract infection in 48 cases (61.3%), axial deviation in 86 cases (43.2%), and delayed union in 50 cases (25.13%). Multivariate analysis showed that the bone defect length (P = 0.02, OR = 5.489), the number of previous surgeries (P = 0.003, OR = 2.204), and the external fixation index (P = 0.01, OR = 1.202) were significantly correlated with pin tract infection. Bone defects of the middle 1/3 (P < 0.001, OR = 23.769), the bone defect length (P < 0.001, OR = 2.776), and the external fixation index (P < 0.001, OR = 1.154) were significantly correlated with axial deviation. The bone defect length (P = 0.003, OR = 1.242), soft tissue defects (P = 0.013, OR = 0.312) and bone defects of the distal 1/3 (P = 0.023, OR = 4.257) were significantly correlated with delayed healing. The ASAMI bone score at the last follow-up showed a rate of excellent and good bone results of 95.48% and a rate of excellent functional results of 87.94%.ConclusionThe Ilizarov bone transfer technique is an effective method for treating tibial bone defects, and shortening the treatment period can reduce the incidence of complications. Older patients and those with longer bone defects, a higher external fixation index, more previous operations, and defects of the middle and distal 1/3 had a higher incidence of complications.