Three-dimensional Materials Research Articles

Design, Manufacturing, and Analysis of Periodic Three-Dimensional Cellular Materials for Energy Absorption Applications: A Critical Review.

Cellular materials offer industries the ability to close gaps in the material selection design space with properties not otherwise achievable by bulk, monolithic counterparts. Their superior specific strength, stiffness, and energy absorption, as well as their multi-functionality, makes them desirable for a wide range of applications. The objective of this paper is to compile and present a review of the open literature focusing on the energy absorption of periodic three-dimensional cellular materials. The review begins with the methodical cataloging of qualitative and quantitative elements from 100 papers in the available literature and then provides readers with a thorough overview of the state of this research field, discussing areas such as parent material(s), manufacturing methods, cell topologies, cross-section shapes for truss topologies, analysis methods, loading types, and test strain rates. Based on these collected data, areas of great and limited research are identified and future avenues of interest are suggested for the continued maturation and growth of this field, such as the development of a consistent naming and classification system for topologies; the creation of test standards considering additive manufacturing processes; further investigation of non-uniform and non-cylindrical struts on the performance of truss lattices; and further investigation into the performance of lattice materials under the impact of non-flat surfaces and projectiles. Finally, the numerical energy absorption (by mass and by volume) data of 76 papers are presented across multiple property selection charts, highlighting various materials, manufacturing methods, and topology groups. While there are noticeable differences at certain densities, the graphs show that the categorical differences within those groups have large overlap in terms of energy absorption performance and can be referenced to identify areas for further investigation and to help in the preliminary design process by researchers and industry professionals alike.

The evolution of intergranular networks during grain growth and its effect on percolation behavior

Triple junctions (TJs) are line defects in three-dimensional (3D) polycrystalline materials where three grains meet. Transport along the TJs depends on the connectivity between them. Here, we investigate the connectivity of more than 6000 TJs in a 3D microstructure of pure iron (Fe) through the lens of bond percolation. Our efforts are made possible by synchrotron-based x-ray diffraction tomography, which allows us to resolve the TJ network both temporally and spatially, during grain growth. In the framework of standard percolation theory, we determine a percolation threshold of the TJs, above which there exists a continuous pathway of TJs that travels infinitely far. Our experimental results indicate a surprisingly different percolation threshold (by 16%) compared to models and theories. The reason for the discrepancy is that the real TJ network has a topological disorder that is not present in the idealized microstructures considered in prevailing models and theories. Leveraging the wealth of time-resolved data we trace the origin of this disorder by following the topological transitions that accompany grain growth. Overall, the insights obtained in this study can help guide the design of polycrystalline materials via defect engineering.

Discuss on Preparation Method of Composite Sports Equipment Based on Stretchable Nanofiber Fabric

Stretchable nanofiber fabrics refer to fabrics woven with elastic nanofibers, and nanofibers are defined as fibers with a diameter less than 100 nm. For example, nanofibers are implanted on the surface of the fabric to form a stable gas film. The biphobic interface can be used for the purification and filtration of sports equipment, chemical products, medical drugs and other products. The development of sports is increasingly dependent on science and technology, and stretchable nanofibers, as an emerging field of science and technology, are undoubtedly widely used in sports materials. This article first explains the role and background of stretchable nanofiber fabrics in sports equipment, and explains related methods, such as the slurry method for preparing rubber thermally conductive composites in sports equipment, and testing the thermal conductivity and thermal conductivity of composite materials. Diffusion coefficient, density and specific heat capacity; and then explain the polyrhodanine coating method, coating stretchable nano fabric, testing its mechanical properties and thermal conductivity, calculating the agglomeration phenomenon of particles in the rubber, you can get the wrapped PRh- The effect of BNNSs’ self-aggregation is suppressed; then the stress and strain of the nano-layer are tested using electrospinning technology, that is, the mechanical properties; finally, the tensile test of carbon fiber three-directional nano-fabric sports composite material is carried out, the tensile model is set, and the test is performed The strain and deformation in the stretching process at 0° and 90°, the load change and tensile elongation at break of the two are analyzed, the tensile attenuation rate in the 0° direction is lower than the attenuation rate in the 90° direction, 0° The tensile elongation at break in the direction of 90° is less than the tensile elongation at break in the direction of 90°, and one of the differences is judged that there is no carbon nanofiber on the parallel load in the 90° direction. The application of the above, taking bicycle tires and golf clubs as examples, combined with the average expected lift and 90° three-dimensional weaving method, the tensile strength direction can be obtained. This nanofiber three-dimensional weaving method has a higher tensile load than the composite material in the 90° direction. The average expected improvement of the ordinary weaving method is 36.1%, and the use of 90° three-dimensional nano fabric materials can improve the performance of sports equipment under this material by 16.9% to 51.8%.

PENGARUH MODEL PEMBELAJARAN CONTEXTUAL TEACHING AND LEARNING (CTL) TERHADAP KEMAMPUAN PEMAHAMAN KONSEP MATEMATIS SISWA PADA MATERI DIMENSI TIGA

This research aims to determine whether there is an influence of the CTL learning model on students' ability to understand mathematical concepts in three-dimensional material. This research approach is a quantitative approach with a quasi-experimental type of research. The population of this study was class XII of SMA Negeri 1 Teluk Dalam in the 2023/2024 academic year, consisting of 262 students. Samples were taken using the Cluster Random Sampling technique, namely class XII Science-Melati (Experiment) 34 students and XII Science-Teratai (Control) 26 students. The instrument used is a test of students' ability to understand mathematical concepts in three-dimensional material. The results of research data processing showed that the average Pretest score for the experimental class was 65.59 and the control class was 65.38 and the Posttest for the experimental class was 72.03 and the control class was 66.12. Hypothesis testing using the Independent-Samples T Test shows that the sig (2-tiled) value is 0.048 < 0.05, meaning there is a significant difference in the posttest scores for the two classes. It was concluded that the CTL learning model influenced students' ability to understand mathematical concepts in three-dimensional material. This is influenced by students who play an active role in discovering concepts of learning material through real experience and collaboration in discussions with friends and teachers. Researchers suggest (1) The CTL learning model is an alternative for teachers to build students' ability to understand mathematical concepts (2) Students are advised to seek and build understanding of learning material through their knowledge of the real world (3) The results of this research should be taken into consideration by researchers Next in choosing a learning model.

Formulation and Characterization of Chitosan-Based Mixed-Matrix Scaffold for Tissue Engineering

The use of scaffolds, three-dimensional porous, biodegradable and biocompatible structures, that can be produced from natural polymers, synthetics, ceramics and metals is crucial in the tissue engineering field. Chitosan is a polysaccharide of natural origin, found in the exoskeleton of marine arthropods and in the cell wall of fungi, with enormous popularity in the production of three-dimensional materials for Tissue Engineering, in particular bone repair. This polymer has several advantages in the production of these structures in bone regeneration and repair: biodegradability, biocompatibility, non-toxicity and antimicrobial properties. This study aimed to prepare porous scaffolds, for bone repair of degenerative diseases in the spine with better performance and less secondary effects, based on chitosan and another biopolymer (sodium alginate) with the incorporation of calcium phosphates (hydroxyapatite and β-tricalcium phosphate), for tissue engineering application. The obtained scaffolds were object of a detailed characterization, namely with regard to their porosity through the ethanol method, degradation, positron annihilation spectroscopy (PAS), mechanical properties, scanning electronic microscope (SEM), thermal stability through thermogravimetric analysis (TGA), chemical composition through X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). The results obtained showed that the different scaffolds presented pores able to support osteoid matrix growth. The crosslinking of scaffolds was also evaluated and resulted in pores with smaller dimensions and higher regularity in the chitosan-sodium alginate polymer without calcium phosphate scaffold. It was also possible to observe the effect of inorganics on mixed-matrix scaffolds, both morphologically and chemically. These scaffolds showed promising results in terms of mechanical and chemical properties, along with promising porosity for tissue regeneration applications.

Experimental and numerical analysis of bending performance for a glass-epoxy composite with integrated sheet-shaped shape memory alloy actuator elements

Shape memory alloys (SMA) belong to the group of smart materials and show particularly a promising potential for an active functionalization of lightweight composite structures with respect to enabling smart structures. In this work, various manufacturing concepts for the integration of thin sheet-shaped SMA actuator elements in a thin glass-epoxy composite beam are experimentally and numerically studied with regard to its bending deformation performance realized by thermal induced shape memory effect of the SMA actuator element. For numerical modeling, the shape memory effect of the SMA on structural level, a three-dimensional thermomechanical constitutive material model is applied. In the experiments, the same deformation pattern of the composite beam was observed for all integration concepts investigated, with the degree of deformation showing strong differences both when the shape memory effect is activated and deactivated. The complex material behavior of the SMA actuator under bending deformation is modeled via the finite element method with sufficient accuracy including existing tension and compression loads.

Strong, Tough, and Biocompatible Poly(vinyl alcohol)-Poly(vinylpyrrolidone) Multiscale Network Hydrogels Reinforced by Aramid Nanofibers.

Poly(vinyl alcohol) (PVA) hydrogels are water-rich, three-dimensional (3D) network materials that are similar to the tissue structure of living organisms. This feature gives hydrogels a wide range of potential applications, including drug delivery systems, articular cartilage regeneration, and tissue engineering. Due to the large amount of water contained in hydrogels, achieving hydrogels with comprehensive properties remains a major challenge, especially for isotropic hydrogels. This study innovatively prepares a multiscale-reinforced PVA hydrogel from molecular-level coupling to nanoscale enhancement by chemically cross-linking poly(vinylpyrrolidone) (PVP) and in situ assembled aromatic polyamide nanofibers (ANFs). The optimized ANFs-PVA-PVP (APP) hydrogels have a tensile strength of ≈9.7 MPa, an elongation at break of ≈585%, a toughness of ≈31.84 MJ/m3, a compressive strength of ≈10.6 MPa, and a high-water content of ≈80%. It is excellent among all reported PVA hydrogels and even comparable to some anisotropic hydrogels. System characterizations show that those performances are attributed to the particular multiscale load-bearing structure and multiple interactions between ANFs and PVA. Moreover, APP hydrogels exhibit excellent biocompatibility and a low friction coefficient (≈0.4). These valuable performances pave the way for broad potential in many advanced applications such as biological tissue replacement, flexible wearable devices, electronic skin, and in vivo sensors.

Dynamic strain coupling driven by structural phase transition in mixed-dimensional 2H-MoS2/VO2 van der Waals heterointerfaces

Mixed-dimensional van der Waals (vdW) heterostructures, integrated two-dimensional (2D) atomic crystals with three-dimensional (3D) functional materials, offer a powerful means to manipulating physical properties and generating unprecedented functionalities. Understanding interfacial couplings at those hetero (homo)-interfaces is indispensable for exploring new optical and electronic devices. Herein, we investigated dynamically phase-transition-driven strain coupling across a vdW heterointerface through integrating 2D layered 2H-MoS2 nanoflakes onto 3D phase-change VO2 epitaxial thin films. The Raman peak positions of the in-plane and out-of-plane vibration modes E2g1 and A1g from the 2H-MoS2 nanoflakes show a phonon softening and reversible hysteresis loop as a function of temperature in this mixed-dimensional vdW 2H-MoS2/(1¯11)-VO2/(11¯02)-Al2O3 heterostructure, originating from the co-action of temperature-dependent anharmonicity in 2H-MoS2 and reversible structural phase transition (SPT)-induced in-plane tensile strain from the VO2 thin film. Accordingly, the integrated Raman scattering intensity of these two feature peaks of the 2H-MoS2 nanoflakes increased (decreased) as the temperature increased (decreased), exhibiting a hysteresis loop in the SPT and metal–insulator transition region of VO2. Additionally, the peak integrated intensity enhancement ratio of the E2g1 and A1g vibration modes was approximately 2.3 and 2.8, respectively. These results indicate that the dynamically SPT-driven in-plane tensile strain from the bottom VO2 layer interfacially couples with the adjacent 2H-MoS2 nanoflakes and results in a reduction in the electronic transition energy, leading to an enhancement in the Raman scattering intensity of 2H-MoS2. Our work holds promise for dynamic strain control of lattice dynamics and electron–phonon interaction of 2D materials for functional electronic and photoelectronic devices.

Enhancing Kinetics in Sodium Super Ion Conductor Na3MnTi(PO4)3 through Microbe-Assisted and Structural Optimization.

Sodium (Na) super ion conductor (NASICON) structure Na3MnTi(PO4)3 (NMTP) is considered a promising cathode for sodium-ion batteries due to its reversible three-electron reaction. However, the inferior electronic conductivity and sluggish reaction kinetics limit its practical applications. Herein, we successfully constructed a three-dimensional cross-linked porous architecture NMTP material (AsN@NMTP/C) by a natural microbe of Aspergillus niger (AsN), and the structure of different NMTP cathodes was optimized by adjusting different transition metal Mn/Ti ratios. Both approaches effectively altered the three-dimensional NMTP structure, not only improving electronic conductivity and controlling Na+ diffusion pathways but also enhancing the electrochemical kinetics of the material. The resultant AsN@NMTP/C-650, sintered at 650 °C, exhibits better electrochemical performance with higher reversible three-electron reactions corresponding to the voltage platforms of Ti4+/3+, Mn3+/2+, and Mn4+/3+ around 2.1, 3.6, and 4.1 V (vs Na+/Na), respectively. The capacity retention rate is up to 89.3% after 1000 cycles at a 2C rate. Moreover, a series of results confirms that the Na3.4Mn1.2Ti0.8(PO4)3 cathode has the most excellent electrochemical performance when the Mn/Ti ratio is 1.2/0.8, with a high capacity of 96.59 mAh g-1 and 97.1% capacity retention after 500 cycles.

Phase field modeling of crack propagation in three-dimensional quasi-brittle materials under thermal shock

Quasi-brittle materials create intricate crack patterns on their surface and internal three-dimensional crack networks when exposed to thermal shock conditions. Their cracking behavior is notably impacted by their quenching temperature and size. In this paper, a coupled three-dimensional phase field-cohesive zone model that accounts for thermoelastic fracture is developed to reproduce the quenching and cracking experiments of ceramic balls. The accuracy of the phase field model is demonstrated by simulating the phase field of a single-element cooling process and comparing it with the analytical solution. The quench fracture process of the 3D ceramic ball is then simulated. The phase field simulations show that the surface crack morphology during the quenching process is somewhat random. Still, the crack distribution density is determined by the quenching temperature difference and ceramic ball size. Furthermore, a threshold size is present during the quenching process. When the ceramic ball's radius falls below this threshold, the surface crack pattern no longer appears during quenching. Consequently, the phase-field-cohesive zone model represents an effective means of predicting three-dimensional fracture processes in quasi-brittle materials subjected to thermodynamically coupled loading.

Advances in metal-organic frameworks for hydrogen storage

With the advancement of science and technology and the rapid growth of the population, the global consumption of energy is increasing rapidly. Traditional fossil fuels are non-renewable resources, and their combustion emits large amounts of greenhouse gases, intensifying the pace of global warming. Therefore, people are looking for renewable resources as an alternative. Among them, hydrogen has attracted much attention due to its high energy density, the combustion product of water, and its wide range of sources. However, efficient and safe storage strategies are required to realize the wide application of hydrogen energy. One of the best materials for storing hydrogen at the moment is metal organic frameworks (MOFs), a three-dimensional porous structure material that has drawn interest because of its large surface area, tunability, and recyclability. For this reason, the preparation techniques for MOFs are initially summarized in this article. The fundamentals of MOFs' hydrogen storage were then described, along with the ways in which various circumstances affect how well they store hydrogen. In conclusion, pertinent ideas for modification were put out to enhance their hydrogen storage effectiveness and offer direction for the creation of materials for hydrogen storage.

Solvothermal Guided V2O5 Microspherical Nanoparticles Constructing High-Performance Aqueous Zinc-Ion Batteries.

Rechargeable aqueous zinc-ion batteries have attracted a lot of attention owing to their cost effectiveness and plentiful resources, but less research has been conducted on the aspect of high volumetric energy density, which is crucial to the space available for the batteries in practical applications. In this work, highly crystalline V2O5 microspheres were self-assembled from one-dimensional V2O5 nanorod structures by a template-free solvothermal method, which were used as cathode materials for zinc-ion batteries with high performance, enabling fast ion transport, outstanding cycle stability and excellent rate capability, as well as a significant increase in tap density. Specifically, the V2O5 microspheres achieve a reversible specific capacity of 414.7 mAh g-1 at 0.1 A g-1, and show a long-term cycling stability retaining 76.5% after 3000 cycles at 2 A g-1. This work provides an efficient route for the synthesis of three-dimensional materials with stable structures, excellent electrochemical performance and high tap density.

Nonlinear resonant responses and chaotic dynamics of three-dimensional braided composite cylindrical shell

The advanced three-dimensional braided composite structure has excellent integrity, which can effectively avoid the problems of interlayer stress jump and interface debonding that may occur in traditional composite laminated structures. However, most of the existing references on the three-dimensional braided composite structure are fragmented, and there is little research on their vibrations. Taking the cylindrical shell of a rocket as the object and considering the complex flight environment, a general framework for the vibration problems of the three-dimensional braided composite shell is proposed for the first time. The equivalent mechanical parameters of the three-dimensional braided composite material are calculated based on the volume averaging method. Then, the nonlinear dynamic model of the three-dimensional braided composite cylindrical shell is established, and the natural vibration characteristics are analyzed. Under the case of 1:1 internal resonance, the pseudo-arc length continuation method is used to solve the nonlinear resonant responses of this nonlinear system. Finally, we apply the fourth-order Runge-Kutta algorithm to study the chaotic dynamics of the three-dimensional braided composite cylindrical shell model. This framework presented in this paper can be extended to the study of nonlinear vibrations and chaotic dynamics of other three-dimensional braided composite structures.

Fibroblasts/three-dimensional scaffolds complexes promote wound healing in rats with skin defects

ABSTRACT We aim to construct a three-dimensional nano-skin scaffold material in vitro and study its promoting effect on wound healing in vivo. In this study, hybrid constructs of three-dimensional (3D) scaffolds were successfully fabricated by combination of type I collagen (COL-1) and polylactic-glycolic acid (PLGA). Fibroblasts and human umbilical cord mesenchymal stem cells (hUCMSCs) were used to implanted into 3D scaffolds and constructed into SD skin scaffolds in vitro. Finally, the fibroblasts/scaffolds complexes were inoculated on the surface of rat wound skin to study the promoting effect of the complex on wound healing. In our study, we successfully built a 3D scaffold, which had a certain porosity. Meanwhile, the content of COL-1 in the cell supernatant of fibroblast/scaffold complexes was increased. Furthermore, the expression of F-actin, CD105, integrin β, VEGF, and COL-1 was up-regulated in hUCMSC/scaffold complexes compared with the control group. In vivo, fibroblast/scaffold complexes promoted wound healing in rats. Our data suggested that the collagen Ⅳ and vimentin were elevated and collagen fibers were neatly arranged in the fibroblast/scaffold complex group was significantly higher than that in the scaffold group. Taken together, fibroblast/scaffold complexes were expected to be novel materials for treating skin defects.

Couple-stress elasticity of intrinsic and extrinsic dislocations in three-dimensional multilayered materials

This work investigates the influence of couple stresses on intrinsic and extrinsic dislocations within three-dimensional heterogeneous multilayered structures. The materials consist of orthotropic and dissimilar layers with different elastic properties, incorporating the microstructural lengths from a special version of the anisotropic couple-stress elasticity. Double Fourier series expansions are used to describe extended displacements and tractions, considering rotation and couple-stress components and accounting for arbitrary displacement and rotation discontinuities associated with dislocation and disclination loops as well as periodic dislocation and disclination networks at semi-coherent interfaces. The dual-variable and position technique is used to recursively determine the field responses at any point in the multilayered laminate. The application examples focus on dislocation problems with couple stresses, revealing the effects of the core-spreading dislocation technique, free surfaces, anisotropic elasticity, and couple stresses on the field solutions. The analysis also uncovers pressure and von Mises stress amplitudes, non-zero rotation, and non-symmetric stress profiles due to couple stresses in copper/niobium bimaterials. Changes in the sign and magnitude of the Peach-Koehler forces are observed when couple stresses are introduced, which deviate from the classical theory of dislocations. The investigation finds a significant 29% reduction in energy per unit area at a semi-coherent interface between copper and niobium influenced by couple stresses. These results deepen our understanding of how couple stresses affect dislocation behavior in multilayered materials, and provide prospects for future discrete dislocation and disclination dynamics simulations with engineering applications in various nano- and micro-structured materials.

Hierarchical modulation of extracellular electron transfer processes in microbial fuel cell anodes for enhanced power output through improved Geobacter adhesion

Although microbial fuel cell (MFC) technology is nearing practical realization, the challenge of attaining higher power output continues to impede its widespread implementation. In this study, we successfully developed free-standing three-dimensional high-performance anode materials for MFCs using a straightforward "one-step" process based on garlic. The resulting anode not only promotes the accumulation of biomass and the enrichment of exoelectrogen Geobacter but also facilitates interfacial extracellular electron transfer. This led to rapid start-up within just three days, a robust power density of 12.37 W/m3, and an impressive 24.04 % coulombic efficiency in mixed-culture MFC reactors. Our investigation into the underlying mechanisms of exocellular electron transfer revealed improvements in both direct electron transfer and mediated electron transfer processes. Notably, the fabrication of carbonized garlic MFC anodes proves to be technically competitive and economically relevant. It not only paves the way for the development of high-performance MFCs but also provides valuable insights for the rational design of materials related to microbial electrochemical technologies.

Optimization of Polycaprolactone and Type I Collagen Scaffold for Tendon Tissue Regeneration.

Introduction Collagen synthesis is vital for restoring musculoskeletal tissues, particularly in tendon and ligamentous structures. Tissue engineering utilizes scaffolds for cell adhesion and differentiation. Although synthetic scaffolds offer initial strength, their long-term stability is surpassed by biological scaffolds. Combining polycaprolactone (PCL) toughness with collagen in scaffold design, this study refines fabrication via electrospinning, aiming to deliver enduring biomimetic matrices for widespread applications in musculoskeletal repair. Methods Electrospinning employed four solutions with varied collagen and PCL concentrations, dissolved in chloroform, methanol, and hexafluoro-2-propanol. Solutions were combined to yield 60 mg/mL concentrations with different collagen/PCL ratios. Electrospinning at 12-14kV voltage produced scaffolds, followed by vacuum-drying. Collagen coating was applied to PCL and 15% collagen/PCL scaffolds using a 0.1% collagen solution. SEM characterized fiber morphology, tensile testing was conducted to determine the mechanical properties of the scaffold, and Fourier-transform infrared (FTIR) spectroscopy analyzed scaffold composition. Atomic force microscopy (AFM) analyzed the stiffness properties of individual fibers, and a finite element model was developed to predict the mechanical properties. Cell culture involved seeding human bone marrow mesenchymal stem cells onto scaffolds, which were assessed through Alamar Blue assay and confocal imaging. Results Various scaffolds (100% PCL, PCL-15% collagen, PCL-25% collagen, PCL-35% collagen) were fabricated to emulate the extracellular matrix, revealing collagen's impact on fiber diameter reduction with increasing concentration. Tensile testing highlighted collagen's initial enhancement of mechanical strength, followed by a decline beyond PCL-15% collagen. FTIR spectroscopy detected potential hydrogen bonding between collagen and PCL. A finite element model predicted scaffold response to external forces which was validated by the tensile test data. Cell viability and proliferation assays demonstrated successful plating on all scaffolds, with optimal proliferation observed in PCL-25% collagen. Confocal imaging confirmed stem cell integration into the three-dimensional material. Collagen coating preserved nanofiber morphology, with no significant changes in diameter. Coating of collagen significantly altered the tensile strength of the scaffolds at the macro scale. AFM highlighted stiffness differences between PCL and collagen-coated PCL mats at the single fiber scale. The coating process did not significantly enhance initial cell attachment but promoted increased proliferation on collagen-coated PCL scaffolds. Conclusion The study reveals collagen-induced mechanical and morphological alterations, influencing fiber alignment, diameter, and chemical composition while emphasizing scaffolds' vital role in providing a controlled niche for stem cell proliferation and differentiation. The optimization of each of these scaffold characteristics and subsequent finite element modeling can lead to highly repeatable and ideal scaffold properties for stem cell integration and proliferation.

Antarctic Snow Failure Mechanics: Analysis, Simulations, and Applications.

Snow failure is the process by which the stability of snow or snow-covered slopes is destroyed, resulting in the collapse or release of snow. Heavy snowfall, low temperatures, and volatile weather typically cause consequences in Antarctica, which can occur at different scales, from small, localized collapses to massive avalanches, and result in significant risk to human activities and infrastructures. Understanding snow damage is critical to assessing potential hazards associated with snow-covered terrain and implementing effective risk mitigation strategies. This review discusses the theoretical models and numerical simulation methods commonly used in Antarctic snow failure research. We focus on the various theoretical models proposed in the literature, including the fiber bundle model (FBM), discrete element model (DEM), cellular automata (CA) model, and continuous cavity-expansion penetration (CCEP) model. In addition, we overview some methods to acquire the three-dimensional solid models and the related advantages and disadvantages. Then, we discuss some critical numerical techniques used to simulate the snow failure process, such as the finite element method (FEM) and three-dimensional (3D) material point method (MPM), highlighting their features in capturing the complex behavior of snow failure. Eventually, different case studies and the experimental validation of these models and simulation methods in the context of Antarctic snow failure are presented, as well as the application of snow failure research to facility construction. This review provides a comprehensive analysis of snow properties, essential numerical simulation methods, and related applications to enhance our understanding of Antarctic snow failure, which offer valuable resources for designing and managing potential infrastructure in Antarctica.

Hierarchically three-dimensional ZrO2/Fe3O4/C nanocomposites with Janus structure for high-efficiency electromagnetic wave absorption

Hierarchically three-dimensional (3D) materials present a pivotal challenge and opportunity in achieving effective microwave absorption with synergistic effects. In this work, α-Fe2O3@ZrO2 with core-shell structure were fabricated in-situ on aramid nanofibers by a solvothermal method. Following calcination, 3D ZrO2/Fe3O4/C nanocomposites with Janus structure have been successfully synthesized. By controlling the lattice match and mismatch in both processes, a core-shell structure of α-Fe2O3@ZrO2 and Janus structure of ZrO2/Fe3O4 have been well-define performed. The composite material ZrO2/Fe3O4/C-700 has a minimum reflection loss (RLmin) of −67.4 dB at a thickness of 2.0 mm. The effective absorption bandwidth (EAB) at a thickness of 2.4 mm is 6.0 GHz (11.0–17.0 GHz). This study provides a novel strategy for fabricating high-efficiency electromagnetic wave absorption materials with dual synergistic effects in nanosized scale.

A Data-Driven Constitutive Model for 3D Lattice-Structured Material Utilising an Artificial Neural Network

A new data-driven continuum model based on an artificial neural network is developed in this study for a new three-dimensional lattice-structured material design. The model has the capability to capture and predict the nonlinear elastic behaviour of the specific lattice-structured material in the three-dimensional continuum description after being trained through the appropriate dataset. The essential data as the input ingredients of the data-driven model are provided through a hybrid method including experimental and unit-cell level finite element simulations under comprehensive loading scenarios including uniaxial, biaxial, volumetric, and pure shear loading. Furthermore, the lattice-structured samples are also fabricated using SLA additive manufacturing technology and the experimental measurements are performed and used for validation of the model. This then illustrates that the current model/methodology is a robust and powerful numerical tool to conduct the homogenization in complex simulation cases and could be used to accelerate the analysis and optimization during the design process of new lattice-structured materials. The model could also easily be used for other engineered materials by updating the dataset and re-training the ANN model with new data.