Thermal Neutron Flux Research Articles

Genotype, Environment and Heavy Metals: Variability of The Content of Elements in 40 Potato Varieties from Central-Eastern Poland.

This study investigates the accumulation of toxic heavy metals-cadmium (Cd), chromium (Cr), cobalt (Co), nickel (Ni), lead (Pb), and strontium (Sr)-in potato tubers grown under diverse meteorological and soil conditions in east-central Poland. Conducted from 2021 to 2023 at the Variety Assessment Experimental Station in Uhnin on light acidic soil, the field experiment employed a randomized block design with 3 replications. Forty potato cultivars of varying maturity were evaluated, with agronomic practices adhering to GAP and uniform fertilization applied. Potato tubers were exposed to thermal neutron flux for 2 hours. Gamma radiation detection was conducted using a high-purity germanium (HPGe) detector cooled with liquid nitrogen to enhance resolution. The study highlights significant phenotypic variability in heavy metal accumulation, influenced by genetic, environmental, and genotype × environment interaction factors. Results showed substantial effects of cultivar, year, and their interactions, with varieties (V) accounting for 8.7-36.2% of the variance, environmental factors (Y) contributing 41.2-82.2%, and genotype × environment interactions (V × Y) ranging from 5.5-46.7%. Year-to-year variability was most pronounced for lead, while nickel showed the least variability. Soil pH and humus played a key role in shaping the bioavailability and accumulation of metals in potato tubers.

First Observation of a Nuclear Recoil Peak at O(100eV) with Crab: A Potential New Calibration Standard for Cryogenic Detectors

Any experiment aiming to measure rare events, like Coherent Elastic neutrino-Nucleus Scattering (CEνNS) or hypothetical Dark Matter scattering, via nuclear recoils in cryogenic detectors relies crucially on a precise detector calibration at sub-keV energies. The Crab collaboration developed a new calibration technique based on the capture of thermal neutrons inside the target crystal. Together with the Nucleus experiment, first measurements with a moderated 252Cf neutron source and a cryogenic CaWO4 detector were taken. We observed for the first time the 112eV peak caused by the 182W(n, γ)183W capture reaction and subsequent nuclear recoils. Currently, Crab is preparing a precision measurement campaign based on a monochromatic flux of thermal neutrons from the 250-kW Triga-mark II nuclear reactor at TU Wien. In this contribution, we introduce the Crab technique, present the first measurement of the 112eV peak, report the preparations for the precision measurement campaign, and give an outlook on the impact on the field of cryogenic detectors.

Benchmark study of thermal neutron flux at irradiation position of silicon doping phantom in Tehran Research Reactor

Benchmark study of thermal neutron flux at irradiation position of silicon doping phantom in Tehran Research Reactor

Sensitivity improvement of a deuterium-deuterium neutron generator based in vivo neutron activation analysis (IVNAA) system.

Our lab has been developing a deuterium-deuterium (DD) neutron generator-based neutron activation analysis (NAA) system to quantify metals and elements in the human body in vivo. The system has been used to quantify metals such as manganese, aluminum, sodium in bones of a living human. The technology provides a useful way to assess metal exposure and to estimate elemental deposition, storage and biokinetics. It has great potential to be applied in the occupational and environmental health fields to study the association of metal exposure and various health outcomes, as well as in the nutrition field to study the intake of essential elements and human health. However, the relatively low sensitivity of the system has greatly limited its applications. Neutron moderation plays an important role in designing an IVNAA facility, as it affects thermal neutron flux in irradiation cave and radiation exposure to the human subject. This study aims to develop a novel thermal neutron enhancement method to improve the sensitivity of the in vivo neutron activation analysis (IVNAA) system for elemental measurement but still maintain radiation dose. Utilizing a compact DD neutron source, we propose a new and practical moderator design that combines high density polyethylene with heavy water to enhance thermal neutrons by reducing thermal neutron absorption. All material dimensions are calculated by PHITS, a general-purpose Monte Carlo simulation program. The improvement of the new design predicted by the Monte Carlo simulation for the quantification of one of the elements, manganese was verified by experimental irradiation of manganese-doped bone equivalent phantoms. For the same radiation dose, a 67.9% thermal neutron flux enhancement is reached. With only 4.2% increase of radiation dose, the simulated thermal neutron flux and activation can be further increased by 84.2%. A 100% thermal neutron enhancement ratio is also achievable with a 20% dose increase. The experimental results clearly show higher manganese activation gamma ray counts for each specific phantom, with a significantly reduced minimum detection limit. Additionally, the photon dose was suppressed. The thermal neutron enhancement method can increase the number of useful neutrons significantly but maintain the radiation dose. This greatly decreased the detection limit of the system for elemental quantification at an acceptable dose, which will broadly expand the application of the technology in research and clinical use. The method can also be applied to other neutron medical applications, including neutron imaging and radiotherapy.

Optimization study on the compact thermal neutron imaging system based on portable D-T neutron generator

The distribution of lithium in lithium-ion batteries is critical to their performance and lifespan. Studies have shown that thermal neutron imaging can effectively perform non-destructive testing of this distribution. However, most current thermal neutron imaging systems rely on expensive, bulky, and immobile nuclear reactors or spallation neutron sources, significantly limiting their application scenarios. Therefore, this study adopts a portable D-T neutron generator as the neutron source and uses Monte Carlo simulation methods to optimize the design of key components in the thermal neutron imaging system. Simulation results indicate that the optimized thermal neutron imaging system achieves a thermal neutron flux of 8.36 × 104 n·cm−2·s−1 and a thermal neutron content (TNC) of 14.4% at a collimation ratio of 50. Within an imaging range of Φ100 mm, the non-uniformity of the thermal neutron fluence is approximately 2.07%. Simulation imaging results of lithium and iron step wedges demonstrate that the compact thermal neutron imaging system designed in this study can effectively distinguish between iron and lithium of the same thickness. This finding provides an important reference for subsequent detection of lithium distribution within lithium-ion batteries.

Production and radiochemical separation of Tb-161 as a feasible beta therapeutic radioisotope from reactor irradiated Gd target

Terbium-161 (161Tb) is a promising therapeutic radionuclide that has gained significant attention in the field of nuclear medicine in recent years. 161Tb has several favorable characteristics that make it a valuable candidate for targeted radionuclide therapy. The production of No-carrier-added 161Tb was carried out by the neutron activation of natural gadolinium target in the Egyptian Second Research Reactor (ETRR-2) at a thermal neutron flux position of 1.8 × 1014 ncm-2s-1. The radioactivities of 161Tb as well as coproduced Gd radioimpurities were computed theoretically by the MCNPX2.7.0 code and verified by actual measurements, where accepted discrepancies were obtained. The purification of 161Tb from irradiated Gd target was developed by Chelex-100 resin. The elution performance was studied using different eluents, and 0.1 M HNO3 was found to be the best medium to obtain a high separation efficiency of more than 92% in a short time. The eluted 161Tb was of high chemical, radiochemical, and radionuclidic purities, indicating its potential for effective application in radiopharmaceutical preparation.

Effect of neutron beam properties on dose distributions in a water phantom for boron neutron capture therapy.

From the viewpoints of the advantage depths (ADs), peak tumor dose and skin dose, we evaluated the effect on the dose distribution of neutron beam properties, namely the ratio between thermal and epithermal neutron fluxes (thermal/epithermal ratio), fast neutron component and γ-ray component. Several parameter surveys were conducted with respect to the beam properties of neutron sources for boron neutron capture therapy assuming boronophenylalanine as the boron agent using our dose calculation tool, called SiDE. The ADs decreased by 3% at a thermal/epithermal ratio of 20-30% compared with the current recommendation of 5%. The skin dose increased with the increasing thermal/epithermal ratio, reaching a restricted value of 14 Gyeq at a thermal/epithermal ratio of 48%. The fast neutron component was modified using two different models, namely the 'linear model', in which the fast neutron intensity decreases log-linearly with the increasing neutron energy, and the 'moderator thickness (MT) model', in which the fast neutron component is varied by adjusting the MT in a virtual beam shaping assembly. Although a higher fast neutron component indicated a higher skin dose, the increment was <10% at a fast neutron component of <1 × 10-12Gycm2 for both models. Furthermore, in the MT model, the epithermal neutron intensity at a fast neutron component of 6.8 × 10-13Gycm2 was 41% higher compared with that of 2 × 10-13Gycm2. The γ-ray component also caused no significant disadvantages up to several times larger compared with the current recommendation.

Chromatographic separation of Re-188 from reactor produced W-188 using Bio-Rex 5 anion exchange resin

Rhenium-188 (188Re) is a β−emitting radionuclide with a significant potential for use in targeted radionuclide therapy. The current study set out to assess the possibility of producing 188Re through double neutron capture on 186W at the Egyptian Second Research Reactor (ETRR-2). Using the MCNPX2.7.0 code, the neutron activation of a naturally occurring tungsten target positioned at the highest thermal neutron flux was simulated. There was a little discrepancy between the calculated results and the experimental data. The feasibility of using Bio-Rex 5 anionic resin for developing an 188W/188Re chromatographic generator was investigated using static and dynamic studies. Our results showed that a high adsorption capacity of 240 mg/g towards WO42− was attained. Additionally, more than 97.3 ± 0.6% of the 188Re could be recovered from the generator in the first 3 mL, with high chemical, radiochemical, and radionuclidic purities adequate for radiopharmaceutical preparations as well as clinical applications.

Evaluation of thermal and epithermal neutron flux using the ko­NAA method with Gold and Zirconium monitors

Neutron flux analysis plays a crucial role in various nuclear research studies and sample analysis in research reactors. Accurate knowledge of the neutron flux spectrum and the ratio of thermal to epithermal neutrons is essential in these applications. In recent years, the newly k₀ method has been utilized to determine thermal and epithermal neutron flux. This method involves the irradiation of two monitors, typically gold and zirconium, followed by the counting of emitted gamma rays using suitable detectors like HpGe. By analyzing the photonic peak area of the collected gamma-ray spectrum from the monitors, the thermal and epithermal neutron flux at the irradiation site can be calculated. In this study, the k₀ method was employed to determine the thermal and epithermal neutron flux of Miniature Neutron Source Reactors (MNSRs).The method involved the irradiation of gold and zirconium monitors, followed by the measurement of emitted gamma rays. The photonic peak area of the gamma-ray spectrum obtained from the monitors was utilized to calculate the thermal and epithermal neutron flux. The research achieved a calculated error of 4 percent in determining the neutron flux. The k₀ method, using gold and zirconium monitors, proved to be an effective approach for determining the thermal and epithermal neutron flux in the Isfahan's MNSR. The use of zirconium, with its suitable neutron absorption cross-sections, along with cadmium calculations, contributed to the accuracy of the flux determination. It is recommended to apply the k₀ method in neutron and boron therapies and perform simulations using popular computational codes alongside the dual metal (gold and zirconium) measurement. This would enhance the accuracy of dosimetry calculations for absorbed doses resulting from neutron therapy.

The production and separation of 161Tb with high specific activity at the University of Utah

Targeted radiotherapy (TRT) is an increasingly prominent area of research in nuclear medicine, particularly in the context of treating cancerous tumors. One radionuclide of considerable interest for TRT is terbium-161 (t1/2 = 6.95 days), which undergoes beta emission and shares similar decay properties as 177Lu (FDA-approved as LUTATHERA® and PLUVICTO®). Besides beta emission, 161Tb also emits a significant number of conversion and Auger electrons further enhancing its therapeutic potential. Terbium-161 can be produced using nuclear reactors through an indirect neutron capture reaction, G64160dn,γG64161d→3.66min,β−T65161b, from 160Gd targets. However, a key challenge in utilizing 161Tb for TRT lies in effectively separating target and product materials to attain high specific activity for radiolabeling. Here, we detail the production of no-carrier added 161Tb using low flux research reactors (mean thermal (<0.625 eV) neutron flux: 1.356×1012n∙cm−2∙s−1) like the University of Utah TRIGA Reactor, using enriched 160Gd2O3 targets (1.5 ± 0.3 μCi of 161Tb per mg of 160Gd target per hour of irradiation). We also developed a separation technique based on cation exchange and extraction chromatography, suitable for mCi level irradiations with targets exceeding 200 mg. In a simulated full-scale irradiation, 161Tb was successfully isolated from large mass targets using cation exchange (AG 50W-X8, with 2-hydroxyisobutyric acid at 70 mM, pH 4.75) and extraction chromatography (LN Resin, 0.5–0.75 M HNO3) methods. This resulted in high apparent molar activities of [161Tb]Tb-DOTA (113 ± 3 MBq/nmol), demonstrating high purity 161Tb relevant for potential future preclinical applications.

Polymer Boron-Containing Composite for Protecting Astronauts of Manned Orbital Stations from Secondary Neutron Radiation

This article considers the prospects of using heat-resistant polyimide boron-containing composites to protect astronauts of manned orbital stations from secondary neutron radiation. Variant calculations are performed regarding neutron and gamma-quanta flux distributions in a polyimide composite material with different boron content used to reduce capture radiation. The dependences of spatial distributions of thermal neutron flux density and the gamma-quanta dose rate in a polyimide composite layer with a boron content of 0 to 5% are obtained. An experimental assessment of the energy distribution of neutron and gamma radiation behind the protective polyimide composite is carried out. The introduction of boron atoms in an amount of 3.0 wt.% shows the absence of bursts of secondary gamma radiation energy in the composite, which is due to the high cross-section of thermal neutron absorption by boron atoms. As a result, with a material layer thickness of 3–10 cm, the gamma-quanta dose rate decreases by 2–3 times. The differential thermal analysis method showed that the upper limit of the working temperature of the polyimide composite is 500 °C. The polyimide matrix filled with boron atoms can find effective application in the development of new radiation-protective polymer materials used in manned orbital stations.

Nuclear-excited source of coherent and incoherent radiation with direct nuclear pumping

Uranium fission fragments, as well as the products of 3He(n,p)3H and 10B(n,α)7Li nuclear reactions were utilized in the nuclear reactor for gas ionization and excitation. However, the 6Li(n,α)3H nuclear reaction was less examined. The use of lithium-6 as a surface source of excitation of the gas medium, due to the long path length of tritium nuclei in the gas, allows to excite large volumes of gas as opposed to using 235U or 10B.While investigating the luminescence of noble gases in the core of the IVG.1M research reactor, we noted an appearance of alkali metal lines and a sharp increase in the intensity of these lines at temperatures above 570 K. It was determined that the population of levels of lithium atoms has practically no effect on the population of the 2p-levels of atoms of noble gases. The selectivity of p- and s-levels deactivation by lithium atoms implies the possibility of creating inversion of population at 2p-1s transitions of noble gas atoms. Successful experiments to study the luminescence of gases upon excitation by 6Li(n,α)3H nuclear reaction products allow us to proceed to experiments to achieve the laser action threshold and study the lasing characteristics of gas mixtures at the IGR pulsed nuclear reactor with thermal neutron flux density up to 7∙1016 n/cm2s. For this purpose, an experimental device designs were proposed to perform experiments on the IGR reactor. A step-by-step procedure of fabrication of a nuclear-excited source for excitation of gas mixtures is provided. The results of reactor experiments aimed at determining the spectral and temporal characteristics of optical radiation during excitation of gas mixtures by 6Li(n,α)3H nuclear reaction products are presented.

Optimization and shielding design of a thermal neutron device based on D-D neutron generator with Geant4 toolkit

Neutron activation analysis is a highly sensitive non-destructive testing technique with important applications in industry, geoscience, medical therapy, etc. This work designed and optimized a thermal neutron device that utilized a portable D-D neutron generator, and the Monte Carlo method with the Geant4 toolkit was applied to simulation. The objective of the optimized design is to maximize the thermal neutron flux at the output surface and increase the utilization efficiency of the neutron generator. A parameter K was defined as a measure of the device's slowing capacity for neutrons and was used to determine the optimized device geometry. The simulation considered the contribution of different types and sizes of moderators and reflectors to the thermal neutron intensity to obtain the optimal size. The shielding protection of the device was then designed. The effectiveness of shielding with different thicknesses was evaluated using three dose reference points. The results indicated that the optimized device can achieve a maximum thermal neutron flux of 1.97 × 105 n∙cm−2∙s−1 at the output surface by using high-density polyethylene (HDPE) as the moderator and nickel as the reflector. It was determined that using 45 cm of HDPE and 9 cm of lead protection in sequence along the neutron head axis would reduce the dose rate at the reference point, located 5 cm from the surface of the device, below the safety limit of 2.5 μSv/h.

Introduction of the prompt γ-ray neutron activation analysis system at CARR and the first pilot experiment on boron-containing high-temperature alloys

A prompt γ-ray neutron activation analysis system has recently been developed at China advanced research reactor (CARR), the 60 MW research reactor in China Institute of Atomic Energy (CIAE). The system is set at the cold neutron beam guide with a thermal equivalent neutron flux at the sample position of 1.0 × 109 n·cm−2·s−1 with the power of 30 MW, and it is mainly composed of a neutron beam collimator, a sample chamber, a beam stopper, neutron and γ-ray shieldings and a detection system. The detection system can realize three modes of measurement: single, Compton suppression, and pair modes. The detection efficiency was calibrated up to 11 MeV using a set of radionuclides and the (n, γ) reactions of N and Cl. Boron, one of the most important elements in high-temperature alloy material studies, was analyzed in this work, as the first pilot experiment of the CARR-PGNAA system. The analytical sensitivity of 2000 cps/mg-B was obtained. The results verified the feasibility of the CARR-PGNAA system to measure boron in high-temperature alloys, and laid a foundation for the accurate quantification of boron in the next step.

Bricks non-destructive simulation testing method utilizing neutron radiography facility based on a 7Li(p,n)7Be reaction

The evaluation of non-destructive neutron radiography (NR) for examining the internal composition of various structural materials, has been the focus of extensive research. This manuscript uses non-destructive testing to generate three-dimensional radiographs of three different brick structural materials: glass block, magnesia-chrome, and lead to evaluate their capability to withstand fast neutrons and gammas emitted from a source. When neutrons with thermal or epithermal spectrum are required, the optimum combination for an accelerator was simulated using a 2.8 MeV proton beam on a lithium target. The presented facility tested both thermal and fast neutron radiography. This study examined various aperture diameters and collimator lengths. It found that implementing a special fast neutron filter significantly increased the thermal neutron content (TNC) with minimal impact on the thermal neutron flux. For fast neutron radiography, the study evaluated parameters such as geometric unsharpness, fast neutron flux, and the percentage of the uncollided fast neutron reaching the object. Both neutrons and photons from the source were used to inspect faults in a glass brick.

Measurement of potassium in rats using an In vivo neutron activation analysis system

Abnormal levels of potassium are linked to several health conditions, including high blood pressure, cardiac dysfunction, kidney damage, and osteoporosis. Given the limited availability of in vivo measurement techniques, there is a need for novel methods to measure potassium to enhance the diagnosis and management of potassium metabolism related diseases. This study aimed to evaluate the feasibility of compact neutron generator based in vivo measurement system for quantification of potassium using rat carcasses. A cohort of thirty-nine rats (n = 20 males and 19 females, average weight 255 ± 15 and 163 ± 7 g) were sacrificed, and their carcasses were placed in polyethylene bottles. The rats were then positioned and irradiated in a carefully designed irradiation cave built alongside the neutron generator with an optimized thermal neutron flux and radiation dose ratio. The irradiation time was 10 min, followed by a 5-min decay and 2-h measurement using a high efficiency high purity germanium detector(HPGe). ResultsThe average potassium concentration in male and female rats was found to be comparable (male 2874 ± 161 and female 2866 ± 144 μg/g). A marginally positive correlation between potassium concentration and weight was found in female rats only (male(20) = 0.07, P = 0.76 and female r(19) = 0.34, P = 0.15). We assessed the influence of manganese toxicity on potassium levels and observed no significant impact. These results were consistent with our previous study in mice. ConclusionThis study suggests that in vivo neutron activation analysis could serve as a promising method to quantify potassium and to investigate the storage and metabolism of potassium in human and in animals.

Combined X-ray Diffraction Analysis and Quantum Chemical Interpretation of the Effect of Thermal Neutrons on the Geometry and Electronic Properties of CdTe

Objective: Substantiation of the result of the interaction of thermal neutrons with CdTe crystals by quantum-chemical methods and comparison of the experimental results with the results of quantum-chemical calculations. Methods: Single crystal samples of cadmium telluride (CdTe) were obtained by a modified Bridgman method. The plates cut from the single crystal were subjected to mechanical grinding with abrasive paper of the type P1,200-P4,000, mechanical polishing with silver paste. To clean the surface of the plate from contamination, it was washed in ethyl alcohol. In the experimental part of the work, the influence of low thermal neutron fluxes on the structural parameters of CdTe was studied. The samples were irradiated with a thermal neutron flux in the range from 2.64×107 neutron/cm2 to 1.85×109 neutron/cm2. To study the structure of CdTe crystals, the method of X-ray structural analysis was used, using a DRON-3 X-ray diffractometer. In the second part of the work, computer modeling of the process of interaction of thermal neutrons on CdTe crystals was carried out. Results: X-ray diffraction analysis of the crystals showed that as a result of irradiation with low thermal neutron fluxes, the structural parameters of CdTe improve, as evidenced by the ordering of the crystallites. In addition, in this region of the thermal neutron flux the resistance of the crystals decreases. Conclusion: Calculations of the crystal lattice parameters of CdTe are in good agreement with experimental data. The electronic and optical properties of CdTe have been studied. A decrease in the band gap after irradiation with thermal neutrons has been shown.

Modelling Gd-diamond and Gd-SiC neutron detectors

A custom Monte Carlo (MC) computer model was developed to simulate thermal neutron absorption in, and subsequent photon and electron emission from, natural Gd with a view to using the material as a neutron conversion layer for neutron detectors. The MC code also modelled photon and electron detection with two dissimilar detectors: a thick (500 μm) single crystal diamond detector; and a thin (5.15 μm) commercial off the shelf (COTS) 4H–SiC photodiode detector. The detectors’ quantum detection efficiencies (QE) for hard X-rays and γ-rays were relatively low in comparison to their QE for electrons, thus making it possible to collect electron spectra from the Gd layer neutron conversion products which were not overwhelmed by photon emissions from the Gd. The MC code was utilised to determine the optimal thickness of Gd for the efficient detection of a thermal neutron flux. These radiation hard and spectroscopic detectors paired with natural Gd could find utility as robust and compact thermal neutron detectors for nuclear science and engineering, space science, and other applications.

Actinium-225 photonuclear production in nuclear reactors using a mixed radium-226 and gadolinium-157 target

BackgroundActinium-225 is one of the most promising radionuclides for targeted alpha therapy. Its limited availability significantly restricts clinical trials and potential applications of 225Ac-based radiopharmaceuticals. MethodsIn this work, we examine the possibility of 225Ac production from the thermal neutron flux of a nuclear reactor. For this purpose, a target consisting of 1.4 mg of 226Ra(NO3)2 (T1/2 = 1600 years) and 115.5 mg of 90 % enriched, stable 157Gd2O3 was irradiated for 48 h in the Breazeale Nuclear Reactor with an average neutron flux of 1.7·1013 cm−2·s−1. Gadolinium-157 has one of the highest thermal neutron capture cross sections of 0.25 Mb, and its neutron capture results in emission of high-energy, prompt γ-photons. Emitted γ-photons interact with 226Ra to produce 225Ra according to the 226Ra(γ, n)225Ra reaction. Gadolinium debulking and separation of undesirable, co-produced 227Ac from 225Ra was achieved in one step by using 60 g of branched DGA resin. After 225Ac ingrowth from 225Ra (T1/2 = 14.8 d), 225Ac was extracted from the 226Ra and 225Ra fraction using 5 g of bDGA resin and then eluted using 5 mM HNO3. ResultsMeasured activity of 225Ac showed that 6(1) kBq or 0.16(3) μCi (1σ) of 225Ra was produced at the end of bombardment from 0.9 mg of 226Ra. ConclusionThe developed 225Ac separation is a waste-free process which can be used to obtain pure 225Ac in a nuclear reactor.

Advancing Neutron Detection: Fabrication, Characterization, and Performance Evaluation of Self‐Powered PIN BGaN/GaN Superlattice‐Based Neutron Detectors

Solid state semiconductor based neutron detectors have the potential to be energy efficient and compact, making them suitable for applications where low power consumption and size constraints are important considerations. Herein, neutron detection devices based on PIN structures consisting of BGaN/GaN superlattice (SL) are demonstrated. These SL structures enable to incorporate significant boron (B) content and achieve good crystalline quality epilayers crucial for better neutron detection. Further, by leveraging the built‐in electric field generated by the PIN structure, these devices can be operated without any applied bias, simplifying overall operation and enabling a more compact size system for detection. Their performance is evaluated by measuring real‐time current response under neutron irradiation (IN) and without it (ID). The neutron induced current density (ΔJ = JN − JD) is determined, reaching an impressive value of 0.67 pA cm−2 (two times JD) under thermal neutron flux of 1.2 × 104 n cm−2 s−1 without biasing, demonstrating their self‐powered capability. They exhibit a linear response to varying thermal neutron flux levels. Additionally, the detectors successfully detect low thermal neutron fluxes down to 300 n cm−2 s−1, showcasing their potential for diverse applications, including in low neutron environments, screening nuclear warheads, and preventing illegal trafficking of radiological materials.