Oxidation Tests Research Articles

Deferoxamine alleviates ferroptosis in seawater immersion combined with traumatic brain injury

Traumatic brain injury (TBI) is a major cause of death and disability worldwide, with its severity potentially exacerbated by seawater immersion. Ferroptosis, a form of regulated cell death driven by iron-dependent lipid peroxidation, has been implicated in TBI pathogenesis. However, the specific occurrence and underlying mechanisms of ferroptosis in the context of TBI compounded by seawater immersion remain unclear. Subsequently, we investigated the effects of seawater immersion on ferroptosis after the application of deferoxamine (DFO), an iron chelator and ferroptosis inhibitor, to explore its potential therapeutic value. We conducted RNA sequencing, protein expression analysis, oxidative stress assessment, histopathological examination, and behavioral testing to comprehensively evaluate the impact of DFO on ferroptosis and neurological outcomes. Our results demonstrated that seawater immersion significantly exacerbated ferroptosis in TBI. DFO treatment, however, attenuated ferroptosis, alleviated oxidative stress, reduced brain tissue damage, improved neuronal survival, and promoted motor function recovery. Despite these benefits, DFO exhibited limited effects on anxiety, novel object recognition, and spatial learning and memory. These findings suggest that ferroptosis represents a novel pathological mechanism in TBI under seawater immersion, and that DFO is a promising neuroprotective agent capable of modulating ferroptosis and enhancing neurological function. This study offers new insights into the complex injury conditions associated with TBI and seawater immersion, highlighting the potential of targeting ferroptosis for therapeutic intervention.

Microstructural Stability and High-Temperature Oxidation Behavior of Al0.25CoCrCuFeNi High Entropy Alloy

Al0.25CoCrCuFeNi is a high-entropy alloy composed of transition metals, specifically designed for high-temperature applications owing to its favorable mechanical properties, high melting point, and excellent high-temperature resistance. This alloy has been identified as a promising material for space exploration, particularly in the fabrication of combustion chambers and rocket nozzles by the National Aeronautics and Space Agency. Ongoing alloy development involves modifying the elemental composition. This study reduced aluminum content in the equiatomic AlCoCrCuFeNi alloy to Al0.25CoCrCuFeNi, followed by isothermal oxidation treatments at 800, 900, and 1000℃. A series of experiments were conducted to investigate the microstructure stability and oxidation behavior of the Al0.25CoCrCuFeNi alloy. The alloying elements were melted using a single DC electric arc furnace, followed by homogenization at 1100°C for 10 hours in an inert atmosphere. Subsequently, samples were cut into coupons for isothermal oxidation testing at the desired temperatures for 2, 16, 40, and 168 hours. The oxidized samples were characterized using XRD (x-ray diffraction), SEM (scanning electron microscopy) equipped with EDS (energy-dispersive X-ray spectroscopy), optical microscopy, and Vickers hardness testing. The as-homogenized alloy consisted of two constituent phases: an FCC (face-centered cubic) phase in the dendritic region and a copper-rich FCC phase in the inter-dendritic region. The oxides formed during the oxidation process included Al2O3, Cr2O3, Fe3O4, CoO, CuO, NiO, and spinel oxides (Co,Ni,Cu)(Al,Cr,Fe)2O4), with distinct formation mechanisms at each temperature.

Role of fractional exhaled nitric oxide in patients with sickle cell disease

IntroductionPatients with sickle cell disease exhibit different patterns in pulmonary function tests. In particular, there is little evidence on the fractional exhaled nitric oxide (FeNO) test, and its value ranges and its interpretation in these patients have been under debate in recent years. MethodsWe conduced a cross-sectional, observational and descriptive study between November 2021 and January 2023 including patients aged 6–18 years with sickle cell disease able to perform the FeNO test. We applied the GLI-2012 reference values and the ERS/ATS standards. We defined statistical significance as P < 0.05. ResultsThe sample included 43 patients with a median age of 12 years (IQR, 10−15). We did not find an association between significantly elevated FeNO (≥25 ppb) and the diagnosis of asthma (P = 0.37), an obstructive pattern in spirometry (P = 0.67), a positive bronchodilator test (P = 0.53), clinical bronchial hyperreactivity in the context of cold or flu-like symptoms (P = 0.48), cough with exercise (P = 0.42) or nocturnal cough (P = 1.0), but found an association with peripheral eosinophilia (P < 0.01). ConclusionsWe found no association between FeNO values and the classic features of asthma (clinical or spirometric) in patients with sickle cell disease. Therefore, airway inflammation mechanisms are probably different in these patients.

Tratamiento químico de vinaza de caña de azúcar con peróxido de hidrógeno

[Introduction]: Vinasse is generated as a residue in the production of ethanol by fermentation-distillation of molasses/sugar cane juice, at a rate of 13 L/L of ethanol. It is an acid liquid, brown in color, characterized by high mineralization and Chemical Oxygen Demand (COD) values of up to 150 000 mg/L, being highly polluting. [Objective]: The objective of this research was to evaluate a vinasse treatment process with hydrogen peroxide as a source of hydroxyl radicals at laboratory scale. [Methodology]: The vinasse samples, from different distilleries in the province of Tucumán, were characterized following standardized techniques of Standard Methods. The oxidation tests were carried out with different peroxide/vinasses ratios, in a semi-batch reactor, under ambient conditions, measuring COD as an indicator parameter of the treatment. [Results]: After 5 days, an 85 % decrease in COD and an increase in the Biodegradability Index were achieved. The kinetics of the oxidative reaction was first order with respect to COD, with an apparent rate constant of 0.3694 1/day. [Conclusions]: Although the COD values allowed by local regulations (250 mg/L) were not reached, the proposed treatment is encouraging due to its simplicity, representing a potential option to the environmental challenge represented by vinaze in Latin America.

500 μm heavy micro-alloyed Cu wire for IGBT application: The study on microstructure characteristics, electrical fatigue fracture mechanism and bonding reliability

In this study, we introduced trace amounts of silver and nickel into 500 μm diameter copper wires to form micro-alloyed copper wires used in insulated gate bipolar transistors (IGBT). The addition of silver and nickel enhanced the mechanical properties of the conductors and suppressed the work hardening effect, significantly improving the power cyclic lifetime. Additionally, this study conducted chlorination and high-temperature oxidation test to compare the application characteristics of the heavy micro-alloyed copper wires with pure copper wires, through tensile and bending test, as well as electrical property comparisons. Finally, Cu50Ni (50 ppm Ni) wires were selected and nickel ceramic substrates for wire bonding to evaluate module electrical properties and bonding reliability.In the chloride test, there was no significant pitting corrosion observed in copper wire, and the micro-alloyed copper wire outperformed the pure copper wires in terms of bending lifetime and power cycling performance. In the high-temperature oxidation test, an oxide layer of cuprous oxide formed on the surface of all wires. The pure copper wire exhibited a significant increase in resistance. Notably, the micro-alloyed copper wires had better resistance to oxidation. Regarding wire bonding, the use of Cu50Ni wires and nickel ceramic substrates reduced the diffusion rate of nickel atoms from the substrate to the copper wire, forming a thinner alloy diffusion layer. This prevented electrical degradation and achieved high bonding reliability, especially under higher bonding forces. These findings confirm that micro-alloyed copper wires are suitable for high-power applications.

Oxidation mechanism and kinetics of TiB2 submicron powders in air

AbstractHigh‐activity TiB2 submicron powders were synthesized via microwave‐assisted carbothermal reduction, and their oxidation behavior at 550°C–1000°C for 0.5–1.5 h in air atmosphere was carried out by the isothermal oxidation test. The phase composition and microstructure evolution of the oxidation products were performed by X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM). It was established that TiB2 submicron powders had been significantly oxidized at 550°C, and the oxidation products were TiO2 and B2O3. Hexagonal plate‐like TiB2 grains had been completely disappeared, and fragmented into uniform nano‐scale spherical TiO2 particles after being oxidized at 1000°C for 1 h, accompanied by the violent evaporation of B2O3 products at temperatures above 1000°C. In addition, the corresponding oxidation kinetics was investigated by using a non‐isothermal thermogravimetric (TG)–differential scanning calorimetry (DSC) technique. The results showed that the Mample power law (n = 1) was the most probable mechanism function, and the oxidation activation energy E of TiB2 submicron powders was 640.58 kJ/mol.

Revealing the oxidation behavior of AlCrxFeNi lightweight multi-principal element alloys via experimental and first-principles calculations

Developing alloys capable of withstanding high temperatures is crucial for modern engineering applications. Introducing multi-component alloys (MPEAs) has provided new strategies for designing high-temperature alloys. We have successfully prepared a series of AlCrxFeNi lightweight MPEAs in this study. The oxidation behavior of AlCxFeNi lightweight at 800 °C was investigated systematically through a combination of experimental methods and first-principles calculations. The microstructure characterization before oxidation reveals that the lightweight AlCrxFeNi MPEAs consist of BCC and B2 phases. In contrast, the AlCrFeNi alloy exhibited a microstructure characterized by typical eutectic features. Oxidation tests indicate that all three alloys exhibited oxidation kinetics following a parabolic law, with oxidation rates decreasing as the Cr content increased. Post-oxidation microstructural characterization revealed an oxide layer composed primarily of Al2O3 and Cr2O3 on the alloy surfaces. First-principles calculations provided insights into the microscopic mechanisms underlying the oxidation process. The results demonstrate that the adsorption energy of the O atom at the top position of the Cr atom is significantly lower than that of the Al atom at the top position. Electronic structure analysis shows that the Cr-O covalent bonding is stronger than the Al-O covalent bonding, which accounts for the oxidation resistance improvement as the Cr element content increases. This study advances MPEAs for high-temperature environments by elucidating these microscopic mechanisms.

Influence of Al2O3 content on microstructure and oxidation resistance of glass-ceramic coatings for 06Ni9DR alloy steel

Glass-ceramic coatings with different Al2O3 content were prepared for oxidation protection of 06Ni9DR alloy steel. The microstructure and oxidation protection rate of coatings with different content of Al2O3 at 1200 °C were investigated. The results showed that the average internal pore size decreased with Al2O3 content and the protection of the coating increased after oxidation test for 3 h. The oxidation protection rate of coating with 20 wt% Al2O3 was the worst due to many large-size pores in the coating and bad thermal stability, and the melting of FeO into the liquid phase accelerated the formation of cracks inside the steel and further deteriorate the oxidation protection. As the alumina content increased, the liquid phase in the coating significantly decreased, and correspondingly the thermal stability increased; At the same time, a large number of 0.5–3 μm pores were formed in the coating, which effectively prolonged the oxygen diffusion path, further enhanced the oxidation resistance of the coating. The glass-ceramic coating with 80 wt% Al2O3 exhibited good oxidation protection, reaching 73.6 ± 1.6 % at 1200 °C for 3 h.

Rare‐earth compositional screening of high‐entropy diborides for improved oxidation resistance

AbstractCompositional screening is an important strategy to improve the oxidation resistance of high‐entropy diborides (HEB2), yet the related studies are limited. Here, we report a rare‐earth (RE) element compositional screening strategy to improve the oxidation resistance of HEB2. To be specific, the single‐phase (Hf0.28Zr0.28Ta0.28RE0.16)B2 (HEB2‐RE) samples with 12 different RE elements are fabricated via ultrafast ultrahigh‐temperature synthesis and spark plasma sintering techniques, and their oxidation resistance is explored by isothermal oxidation tests. The results show that the as‐obtained HEB2‐Sc samples possess the best oxidation resistance among all the as‐fabricated HEB2‐RE samples. Such outstanding oxidation resistance is ascribed to the enhanced viscosity of the generated B2O3 glass originating from the solid solution of (Zr, Me)0.84Sc0.16O2 complex oxides, as confirmed by transmission electron microscope observations and first‐principles calculations.

The oxidation behavior and interfacial reaction between SiO2 coating and Ti45Al8.5Nb alloy

In this study, SiO2 coating was electrodeposited on Ti45Al8.5Nb alloy to enhance its oxidation resistance at 900 °C. The focus was on the interaction between SiO2 coating and the alloy substrate, and specifically, the role of the Nb element in this context. The formation of a SiO2/(Ti, Nb)O2/Ti5Si3 + Al2O3 three-layer oxide scale significantly inhibits the inward diffusion of oxygen. Beyond the characteristic Ti5Si3 + Al2O3 layer at the interface, the Nb2Al phase embedded within Ti5Si3 was observed. Concurrently, the presence of a (Ti, Nb)O2 layer was confirmed. The relationship between the coating thickness and oxidation resistance was also investigated. It was found that the thickness of the SiO2 coating affects the density of the oxide scale and the inward diffusion rate of oxygen. Moreover, due to the good adhesion to the substrate, the derived oxide scale exhibited good anti-peeling performance when subjected to a cyclic oxidation test.

The effect of supported metal Species on soot oxidation over PGM/CeO2-ZrO2

Abstract Herein is studied the soot oxidation over platinum group metal oxide/CeO2–ZrO2 (PGM/CZ) catalysts. The ability to capture gas-phase oxygen was in sequence of Ru/CZ &amp;gt; Rh/CZ &amp;gt; Ir/CZ &amp;gt; Pt/CZ &amp;gt; Pd/CZ. A soot oxidation test by TG-DTA showed that Ru/CZ, Rh/CZ, and Ir/CZ are highly active catalysts. It was found that there is a good correlation between the ability to capture gas-phase oxygen and soot oxidation activity. TEM observation revealed that soot oxidation mainly occurs at the interface between soot and CZ surfaces. The Ea values and soot oxidation test using labelled oxygen suggest that highly active catalysts oxidize soot by CZ lattice oxygen. For Ir/CZ, soot oxidation at 270 °C occurred due to the reduction by soot. Ru/CZ and Rh/CZ captured gas-phase oxygen spontaneously below 250 °C, resulting in soot oxidation at 270 °C. H2-TPR results suggest that the reactivity of lattice oxygen in the CZ surface, improved by PGM, is also related to soot oxidation activity. This suggests that the ability to capture gas-phase oxygen and the reactivity of lattice oxygen in the CZ surface determine the soot oxidation activity, and that Ru, Rh, and Ir have the effect of enhancing these properties.

The oxidation-resistant Mo30Si60B10 coating for protection of the T2 phase-based molybdenum alloy

This study focuses on fabrication of a Mo30Si60B10 coating with elevated silicon content, which enhances working properties of Mo-alloy based on the Т2 phase (t-Mo5SiB2). The Mo30Si60B10 coating has a columnar structure. The alloy is characterized by hardness of 17 GPa; Young's modulus of 304 GPa, and elastic recovery of 29 %. Deposition of the coating increased hardness by 40 %; the Young's modulus, by 18 %; and elastic recovery, by 25 %. Oxidation tests at 1200 °C demonstrated that the specific mass loss of the alloy with Mo30Si60B10 coating was 1.5-fold lower than that of the uncoated alloy. An 18 μm thick oxide layer based on a-SiВO and containing MoO2 particles was formed on the alloy surface. The coating contributes to a ∼14-fold reduction of oxide layer thick. The increase in oxidation resistance of alloy after coating deposition is related to sealing of substrate defects and formation of an a-SiВO layer with elevated silicon content.

Electrical resistance based residual strength prediction method for SiC/SiC mini-composites after stress-free oxidation

A stress-free oxidation model considering the microstructural characteristics of SiC/SiC mini-composites was proposed based on the electrical resistance change before and after oxidation. The relationship between the electrical resistance and the thickness of the internal fiber oxide layer was established. The stress-free oxidation tests were carried out at different temperatures for different oxidation times. The results of the oxide layer thickness calculated by the model agree well with those of the SEM observation. Based on the microstructure of tensile fracture after oxidation, the residual strength model of SiC/SiC mini-composites was proposed. The residual strength of the specimens after stress-free oxidation was calculated based on the oxide layer thickness obtained from the model. The error between the calculated and experimental results is within 14.48 %.

Comparison of oxidation resistance of high-entropy (Ti0.2Zr0.2Hf0.2Ta0.2Nb0.2)C/SiC composites prepared by different methods at 1300–1600 °C

Dense monolithic (Ti0.2Zr0.2Hf0.2Ta0.2Nb0.2)C/SiC (HEC/SiC) composites were prepared via single-source-precursor (SSP) and solid-state reaction (SSR) method, respectively. The SSP-method nanocomposite features HEC nanoparticles uniformly dispersed within β-SiC, while the SSR-method composite is a microcomposite containing micro-sized HEC and β-SiC particles. The oxidation tests at 1300–1600 ºC show that the HEC/SiC nanocomposites exhibit much better oxidation resistance than that of the HEC/SiC microcomposites. Firstly, the generated metal-containing complex oxides ((Zr,Hf)6Ta2O17, Ti(Ta,Nb)2O7, and Ta-doped rutile TiO2) become more facile for sintering due to the nano-scaled HEC phase. Secondly, the cracks resulting from the oxidation of HEC nanoparticles are fewer and smaller, decreasing the number of channels for oxygen to pass through and channels need to be healed by SiO2. Finally, the homogeneous distribution of the HEC nanoparticles within β-SiC ensures the homogeneity of the complex oxide layer, significantly reducing the cracks caused by volume expansion and preventing the oxide layer from peeling off.

Effect of Y on Oxidation Behavior of Directionally Solidified Ni-Based Single-Crystal Superalloy

The effect of yttrium (Y) addition on the oxidation behavior of a Ni-based directionally solidified single-crystal superalloy is investigated in this study. Isothermal oxidation tests for samples with different levels of Y addition are conducted at 1100 °C in air. The Y content of the samples is determined by the actual pickup amount obtained from an Inductively Coupled Plasma-Atomic Emission Spectrometry test. It is discovered that the addition of Y increases the oxide resistance by the scale of an adhesive double-layer oxide, which is composed of Al2O3 and spinel Ni(Cr,Al)2O4. With 70 ppm of Y addition, the oxidation mass gain decreases from 12.6 g/m2 for the alloy without Y addition to 5.3 g/m2, and the oxidation rate decreases significantly. In addition, the internal nitride disappears after Y doping because of an increase in oxidation scale adherence and a decrease in oxidation products. In this study, the alloy with 660 ppm Y addition demonstrates the best oxidation resistance.

The Influence of Oil and Thermal Aging on the Sealing Characteristics of NBR Seals.

Nitrile Butadiene Rubber (NBR) is widely used as a sealing material due to its excellent mechanical properties and good oil resistance. However, when using NBR material, the seal structure is unable to avoid the negative effects of rubber aging. Hence, the influence of oil and thermal aging on the characteristics of NBR seals was studied by coupling the mechanical behavioral changes with the tribological behavioral changes of NBR in oil and the thermal environment. For this paper, aging testing and compression testing of NBR were carried out. Additionally, friction testing between friction pairs under different aging times was carried out. The surface morphology of the NBR working surface under different aging conditions was also observed. Finally, coefficients of different test conditions were introduced into the finite element model of NBR seals. It can be seen from the results that the elastic modulus increased with the increase in aging time in the thermal oxidative aging testing. The elastic modulus after 7 days of thermal oxidative aging increased by 135.45% compared to the unaged case, and the elastic modulus after 7 days of oil aging increased by 15.03% compared to the unaged case. The compression set rate of NBR increased significantly with the increase in aging time and temperature. The coefficient of friction (COF) between friction pairs increased first and then decreased with the increase in aging time. The maximum contact pressure decreased by 2.43% between the shaft and sealing ring and decreased by 4.01% between the O-ring and groove. The proportion of the effective sealing area decreased by 3.05% between the shaft and sealing ring and decreased by 6.11% between the O-ring and groove. Furthermore, the sealing characteristics between the O-ring and groove were better than those between the shaft and sealing ring.

Exploring the Therapeutic Potential of Mesenchymal Stem Cells-derived conditioned medium: An In-depth Analysis of Pain Alleviation, Spinal CCL2 Levels, and Oxidative Stress.

Neuropathic pain, a debilitating condition, remains a significant challenge due to the lack of effective therapeutic solutions. This study aimed to evaluate the potential of mesenchymal stromal cell (MSC)-derived conditioned medium in alleviating neuropathic pain induced by sciatic nerve compression injury in adult male rats. Forty Wistar rats were randomly assigned to four groups: control, nerve injury, nerve injury with intra-neural injection of conditioned medium, and nerve injury with intra-neural injection of culture medium. Following sciatic nerve compression, the respective groups received either 10 µl of conditioned medium from amniotic fluid-derived stem cells or an equal volume of control culture medium. Behavioral tests for cold allodynia, mechanical allodynia, and thermal hyperalgesia were conducted, and the spinal cord was analyzed using Western Blot and oxidative stress assays. The behavioral experiments showed a decrease in mechanical hyperalgesia and cold allodynia in the group receiving conditioned medium compared to the injury group and the control medium group. Western blot data revealed a decrease in the expression of the CCL2 protein and an increase in GAD65. Oxidative stress tests also showed increased levels of SOD and glutathione in conditioned media-treated animals compared to animals with nerve injury. The findings suggest that conditioned medium derived from amniotic fluid-derived stem cells can effectively reduce neuropathic pain, potentially through the provision of supportive factors that mitigate oxidative stress and inflammation in the spinal cord.

Developing advanced CrSi coatings for combatting surface degradation of N-type (Zr,Ti)Ni(Sn,Sb) and P-type (Zr,Ti)Co(Sn,Sb) half Heusler thermoelectric materials

In this study, advanced oxidation-protective CrSi coatings were developed and deposited on N-type (Zr,Ti)Ni(Sn,Sb) and P-type (Zr,Ti)Co(Sn,Sb) thermoelectric (TE) materials using an environmentally friendly closed field unbalanced magnetron sputtering PVD system. The oxidation behaviour of the CrSi-coated and uncoated samples was evaluated through static oxidation tests at 500 °C and 600 °C for 10h and 50 h, respectively. In addition, the samples were exposed to cyclic oxidation tests between 25 °C and 500 °C for 10, 30 and 50 cycles, with each cycle consisting of 1h of oxidation at 500 °C, to examine the coating ability to withstand thermal shock, which is involved in the service of TE devices. The surface morphology, cross-section layer structure, elemental distribution and phase constitution were analysed using scanning electron microscopy (SEM), energy dispersive spectroscopy (EDX) and X-ray diffraction (XRD). The mass gain after the oxidation tests was measured and calculated for each sample to study the oxidation kinetics. The uncoated samples exhibited a considerable amount of oxidation, leading to change in the surface morphologies, and the formation of alternated layers including oxide products (Zr(Ti)O2, SnO2) and Ni3Sn4 compound for the N-type and (Zr(Ti)O2, SnO2, Sb2O4) and CoSb compound for the P-type material, after static and cyclic oxidation tests. The experimental work in this study has, for the first time, demonstrated that the CrSi coatings developed with very high thermal stability and oxidation resistance can effectively protect both the N-type and P-type materials from oxidation and sublimation even during cyclic oxidation tests. The strong affinity of Cr and Si to oxygen can trap oxygen, retard its inward diffusion and thus protect the TE material substrate from oxidation. This finding could pave the way towards the further development of long-life high-performance TE generators and devices, thus contributing to the net zero target.

Oxidation behavior of SiC‐AlN ceramics exposed to dry oxygen and water oxygen environments at 1100–1300°C

AbstractThe corrosion of SiCf/SiC composites in gas environment threatens their long‐term service in aeroengines as hot‐end structure components. Addition of corrosion‐resistant phases into SiC matrix is a potential strategy to improve the service performance of SiCf/SiC materials. Here, AlN added SiC ceramics were prepared by reactive melt infiltration, and the effect of AlN phase on the oxidation resistance of the ceramics was emphasized. The oxidation tests were performed in dry oxygen and water oxygen atmospheres at 1100°C–1300°C, respectively. The oxidation mechanism was discussed based on the microstructure evolution of the oxide layer. The results show that the oxide layer is composed of aluminum silicate glass and Al2O3 flakes dispersedly distributed in the glass phase. As the temperature rises, the oxide layer gradually grows and thickens. Finally, a smooth and dense protective layer could be formed on the surface of ceramics to resist oxidation. This study can provide a profound insight to construct SiCf/SiC composites with excellent oxidation resistance.

Impact of Sweet Orange Peel Essential Oil on the Nutrient and Oxidative Stability of Aquafeed During the Storage Condition

The main goal of this study was to assess the qualitative composition of essential oil (P), a natural extract produced from wasted orange peels in the citrus processing sector. Additionally, the study aimed to investigate the alterations in fish feeds when this essential oil is incorporated and stored. The essential oil was extracted from the orange peels provided for the study using the hydrodistillation method and the Clevenger apparatus. The study determined the volatile components of the oil with 100% accuracy. The primary constituent was identified as D-limonene, comprising 59.27% of the total composition. Subsequently, experimental feed groups were established by including the essential oil in the feed rations at ratios of ‰0 (P0), ‰0.5 (P5), ‰1 (P10), and ‰3 (P30). Under storage conditions, the feeds were stored in feed sacks for 60 days. Periodic samples were collected during storage and subjected to nutritional, microbiological, structural, and oxidation tests. The results of the study show that P had no protective effect in fish diets against the growth of yeasts, molds, and other mesophilic aerobic bacteria (p &gt; 0.05). It was shown that the nutritional values varied over time during storage. However, this variation was not substantially correlated with the amount of P in the diets (p &gt; 0.05). There was no discernible impact of the addition of P on the structural characteristics of the feed grains. Nevertheless, the inclusion of P substantially impeded the process of lipid oxidation in the diet (p&lt;0.05). After the two-month storage period, it was shown that adding at least 1 ‰ of P to the fish meals prevented the peroxide generated from oxidation in the feed from exceeding acceptable levels.