Test Chamber Research Articles

Experimental evaluation of airflow guiding components for wind-driven single-sided natural ventilation: A comparative study in a test chamber

Single-sided ventilation is a frequently employed ventilation strategy in contemporary structures, yet its effectiveness is often mediocre, underscoring the need for solutions to enhance its performance. To evaluate the effect of louvres and guide vanes on the effective ventilation rate, 21 different louvre configurations and four guide vane designs were compared with a plain opening for single-sided ventilation in a full-scale experimental test chamber under three different magnitudes of local wind velocity. Ventilation rates were measured using the tracer gas decay method with 12 NDIR CO2 sensors. The findings, obtained under specific test conditions, indicate that deeper openings result in a decline in ventilation rate performance. It was observed that wider guide vanes lead to higher ventilation rates, suggesting their potential to enhance SSV performance. The results reveal that, in most cases, louvres contribute to a decline in the system's performance. However, the ventilation rate is influenced by the angle and number of louvres, with optimal performance observed at specific angles and fewer louvres. These findings provide valuable insights for optimizing the design of airflow-guiding components in wind-driven single-sided ventilation systems, enabling the development of more efficient and customized solutions for natural ventilation in buildings.

Changes in cycling economy and fractional utilization of V̇O2peak during a 40-min maximal effort exercise test with acute hypobaric hypoxia corresponding to 2800 m of altitude.

Peak oxygen uptake (V̇O2peak ) declines by ~7% per 1000 m of increasing altitude, whereas exercise performance seems reduced to a lesser extent. For example, 800-10 000 m track and field performances are decreased by 0.4%-2.4% above 1000 m as compared to below and some studies show similar drops in cycling performance. A greater decline in V̇O2peak than in endurance performance with altitude suggests a higher fractional utilization of V̇O2peak (%V̇O2peak ). Therefore, we hypothesized that the %V̇O2peak is higher with acute hypoxic exposure than near sea level. Sixteen lowlanders (8 women, age: 31 ± 7 years [mean ± SD], body mass: 68 ± 8 kg, V̇O2peak : 60 ± 8 mL min-1 kg-1 ) underwent cycling testing in a hypobaric hypoxic chamber on 6 test days, three conducted at 300 m and three at 2800 m of acute altitude. At both altitudes, V̇O2peak was determined, and during a 40-min all out maximal effort time trial (TT), mean power output (MPO) and mean V̇O2 (%V̇O2peak ) were assessed. V̇O2peak decreased by 11.2 ± 3.0% (p < 0.001), while MPO during the TT declined by 10.7 ± 3.1% (p < 0.001) at 2800 m as compared to 300 m. During the TT, %V̇O2peak was higher at altitude, corresponding to 75.9 ± 4.5% at 300 m and 78.8 ± 4.2% at 2800 m (p = 0.011), and cycling economy (mL O2 kJ-1 ) was poorer (+3.4 ± 2.7%, p < 0.001). The %V̇O2peak was higher during a cycling TT at 2800 m of altitude than near sea level, while cycling economy was poorer. This resulted in a similar reduction in performance and V̇O2peak . Future studies should address the physiological mechanisms underlying the elevated %V̇O2peak .

Impact of test methodology on the efficacy of triethylene glycol (Grignard Pure) against bacteriophage MS2.

The COVID-19 pandemic has raised interest in using chemical air treatments as part of a strategy to reduce the risk of disease transmission, but more information is needed to characterize their efficacy at scales translatable to applied settings and to develop standardized test methods for characterizing the performance of these products. Grignard Pure, a triethylene glycol (TEG) active ingredient air treatment, was evaluated using two different test protocols in a large bioaerosol test chamber and observed to inactivate bacteriophage MS2 in air (up to 99.9% at 90 min) and on surfaces (up to 99% at 90 min) at a concentration of approximately 1.2 - 1.5 mg/m3. Introducing bioaerosol into a TEG-charged chamber led to overall greater reductions compared to when TEG was introduced into a bioaerosol-charged chamber, although the differences in efficacy against airborne MS2 were only significant in the first 15 min. Time-matched control conditions (no TEG present) and replicate tests for each condition were essential for characterizing treatment efficacy. These findings suggest that chemical air treatments could be effective in reducing the air and surface concentrations of infectious pathogens in occupied spaces, although standard methods are needed for evaluating their efficacy and comparing results across studies. The potential health impacts of chronic exposure to chemicals should also be considered, but those were not evaluated here.

Thermoelectric-Based Radiant Cooling Systems: An Experimental and Numerical Investigation of Thermal Comfort

Researching novel cooling and heating technologies as alternatives to conventional vapor-compression refrigeration cycles has received growing attention in recent years. Thermoelectric (TE) systems rank among promising emerging technologies within this category. This paper presents a comprehensive investigation, utilizing numerical modeling and analysis via COMSOL Multiphysics along with experimental validation, to evaluate the performance of a radiant cooling ceiling panel working on thermoelectric principles. Performance metrics are based on thermal comfort levels within the designed test chamber. The system comprises a rectangular test chamber (~1.2 m × 1.2 m × 1.5 m) with a centrally positioned ceiling panel (dimensions: 0.6 m × 0.6 m × 0.002 m). Four TE modules are attached on top of the ceiling panel, facilitating effective cooling to regulate the ceiling temperature to the desired setpoint. The resultant lower ceiling temperature enables heat exchange within the chamber environment via radiation and convection mechanisms. This study examines the time-dependent variations in mean radiant temperature and operative temperature under natural convection conditions, with comfort level assessment carried out using the PMV method according to ASHRAE Standard 55. An experimental chamber is built to validate the numerical model by performing experiments at various ceiling temperatures. Design challenges are discussed in detail. The results of this investigation offer valuable insights into the anticipated thermal comfort achievable through TE-based radiant cooling systems across various operating conditions.

The performance of polymeric insulators which are being used in high transmission and distribution lines in the arid desert climate of south Libya

Libya currently, Polymers have huge production and are therefore enormously used especially in electrical applications. In the overhead transmission and distribution lines polymeric insulators are used in large quantities. The environmentally or naturally induced degradation mechanisms are creating major problems for the electrical properties of these polymeric insulators. The current study was conducted by the author in order to determine the condition of non-ceramic insulators that various power companies in Libya use. This experimental research was done to investigate the suitability of these polymeric insulators. The primary aim was to assess the performance of polymeric insulators which are being used in high transmission and distribution lines in the arid desert climate in the southern Al-Jufra region in Libya. The impacts of enormous heat and ultraviolet radiations on these polymeric insulators were studied. The accelerated aging test chamber was specially designed to achieve the objectives. The aging insulators' electrical strength (withstand) was then compared with the new polymeric insulators. The Dielectric performance indicated that Thermoplastic Elastomers (TPE) insulators overtake the Silicon Rubber (SiR) insulators. Correspondingly an optical result shows that the surface roughness of the aged sample in the SiR case is more in contrast with the new insulators. However, very minor surface roughness was found in the case of aged TPE insulators over the equivalent aging period. The enhanced surface roughness of aged SiR Insulators might impact the dielectric performance after their exposure for a lengthy period in local environmental conditions.

Ni-based coating on 5083 aluminum alloy with Cu-Ni interlayer fabricated by ultra-high-speed laser directed energy deposition

Through the innovative design of interlayer connection materials, a high-performance wear-resistant and corrosion-resistant composite protective coating was successfully prepared on the surface of 5083 aluminum alloy using ultra-high-speed (0.5 m/s) laser energy deposition technology. By conducting orthogonal experiments and analyzing the coating morphology and non-destructive testing results, the optimal process parameters for preparing the Cu-Ni25 alloy interlayer and nickel-based alloy surface protection layer were determined. The bond strength and friction resistance of the composite coating and the substrate were tested by shearing and scratch tests. Furthermore, the wear and corrosion resistance of the nickel-based alloy protective layer and substrate were comparatively assessed using an abrasive wear tester, electrochemical workstation, and salt spray test chamber. The results show that the Cu-Ni25 alloy interlayer plays a good bridge role and realizes metallurgical bonding with the aluminum alloy matrix. Additionally, the addition of the nickel-based alloy surface protection layer yields a significant improvement in deformation resistance, wear resistance, and seawater corrosion resistance compared to the aluminum alloy substrate.

Integrated composite electrothermal de-icing system based on ultra-thin flexible heating film

Icing is a serious threat to the flight safety of aircraft. Lightweight and efficient electrothermal de-icing systems for carbon fiber reinforced polymer components are expected to contribute to the lightweighting and electrification of aircraft. This study presents the development and test of a novel, integrated, multifunctional composite electrothermal ice protection system. The system achieves this by incorporating a carbon-based ultra-thin flexible heating film into a carbon fiber-reinforced polymer composite laminate. T700 and M40 carbon fiber prepregs were used. The system composition and configuration were designed based on the anisotropic mechanical and thermal properties of the carbon fiber-reinforced polymer composite. The effects of ply stacking sequence, presence of insulation layer, ply angle, heating area, and prepreg type on thermal response and de-icing performance were investigated. Thermal response experiments were carried out in both room temperature and low temperature environments. A one-dimensional thermal response analysis model was developed for a representative heating structure. Comparative de-icing experiments were conducted on different samples in a low-temperature test chamber. A numerical model, based on the modified enthalpy-porosity method, was developed to simulate the de-icing process, and showed good agreement with the experimental results. Experiments and numerical calculations show that the arrangement of the heater close to the deicing surface improves the performance of the electrothermal deicing system while maintaining the overall mechanical properties of the multi-layer structure. While the insulation layer helps marginally with heat loss during de-icing, it significantly increases the system’s thermal inertia, which delays the de-icing’s start. It is recommended to minimize or eliminate insulation layer thickness. Rapid de-icing effects, combined with energy conservation, can be achieved through a short-term, high-power heating strategy.

H2O and temperature measurements inpropagating hydrogen/oxygen flames using abroadband swept-wavelength ECQCL.

We present experimental results using a swept-wavelength external cavity quantum cascade laser (swept-ECQCL) diagnostic to measure broadband absorption spectra over a range of 920-1180c m -1 (8.47-10.87µm) with 2ms temporal resolution in premixed hydrogen/oxygen flames propagating inside an enclosed chamber. Broadband spectral fits are used to determine time-resolved temperatures and column densities of H 2 O produced during combustion. Modeling of the flowfield within the test chamber under both equilibrium conditions and using a 1D freely propagating flame model is compared with the experiment in terms of temporal dynamics, temperatures, and H 2 O column density. Outputs from the numerical models were used to simulate radiative transport through an inhomogeneous combustion region and evaluate the performance of the spectral fitting model. Simulations show that probing hot-band H 2 O transitions in the high-temperature combustion regions minimizes errors due to spatial inhomogeneity. Good agreement is found between the experimental and modeling results considering experimental uncertainties and model assumptions.

The ecotoxicity and mutagenicity of fire water runoff from small-scale furnishing materials fire tests

This study aimed to evaluate the ecotoxicity and mutagenicity of fire water runoff generated during fire operations in a closed non-production facility (apartment, house, warehouse, etc.). For this purpose, insulation and furnishing materials used, especially in houses and apartments, including wood (pine and oak), chipboard, poly(methyl methacrylate) (PMMA), and polyurethane foam, were burned. Experiments involving burning one of the selected materials each time and extinguishing the resulting fire with a specific amount of water were conducted in a test chamber equipped with systems for continuous monitoring of the process, including continuous measurement of the weight of the sample and mechanical smoke extraction systems. The fire water runoff samples were tested for ecotoxicity and mutagenicity. Ecotoxicity was evaluated using commercial biotests, i.e., Daphtoxkit F magna (crustaceans), Rotoxkit F (rotifers), Spirodela duckweed toxkit (plants: Spirodela polyrhiza), and Microtox test (bacteria Alivibrio fischeri), whereas mutagenicity was evaluated using the Ames test (Salmonella typhimurium strains TA98 and TAmix). The results demonstrated that the water used to extinguish the polyurethane foam had the highest toxicity. Moreover, Ames test results verified that the fire water runoff generated during testing with polyurethane foam was characterized by the highest mutagenicity. Consequently, water from extinguishing polyurethane foam may pose a greater environmental hazard than water from wood, chipboard, or PMMA.

Sound absorption coefficient measurement for various building elements

The current sound absorption coefficient testing measurement method, ISO 354, primarily focuses on materials used for surface coverings or equivalent sound absorption objects. However, there are other building elements such as lightweight partition walls and windows that do not have solid structures behind them. These elements may allow sound to transmit to adjacent interior spaces or escape to the outside. On the other hand, the transmitted sound is expected to be rebounded into the measurement room when the test material is placed on a hard and thick surface as described in ISO 354. The test was conducted in a reverberation chamber located at the center of three consecutive acoustic testing chambers: reverberation-reverberation-anechoic. The testing chambers are equipped with test openings between them and are fully isolated from one another. The purpose of the test was to confirm whether the current measurement method reflects the influence of the assumed rebounded sound. The sound absorption coefficients were measured with the specimen installed on the floor, representing the ISO 354 condition, and comparisons were made to the conditions where the specimen was installed in another reverberation chamber opening and in the anechoic chamber opening.

AeroFeathers: Feathered airfoils inspired by the quiet flight of owls

Owls are well-known as the quietest flying birds. Recent studies show that they achieve noise-less flight because of their specialized feather design. Their feathers have three important components: a velvety surface texture, comb-like hooks on their leading edge, and jagged fibrous fringes on their trailing edges. Some researchers have attempted to imitate these design features within airfoil designs to reduce aeroacoustic noise emitted by fixed wing and vertical lift vehicles; however, such features cannot be easily fabricated using traditional manufacturing processes. In this student-led project funded by NASA’s University Student Research Challenge, we leverage our established success at additively manufacturing fibrous structures to introduce a new method to 3-D print velvety textures, fibrous fringes, and flexible edge serration using low-cost material extrusion-based printing methods. By altering the printer’s G-code, we create customized feathered airfoils with individual design parameters, including serration thickness and fringe density. We conduct acoustic tests in an anechoic chamber and aeroacoustic tests in an acoustic wind tunnel to determine the effect of each parameter on the overall acoustic signature of the airfoil. We analyze the data and explain the role of owl feather-like features on the noise reduction performance of propeller blades and scaled fixed-wing airfoils.

A methodology for indoor testing of solar radiation impact on vehicle cabin temperature

Air conditioning systems for automotive applications are always striving to attain optimal and effective solutions in order to fulfil diverse needs. Yet, to thoroughly evaluate their system performance, it is essential to account for the influence of solar irradiance on the overall thermal dynamic within vehicle cabin. This study presents an approach to simulate the impact of solar radiation on vehicle cabin thermal behaviour using electric blankets as a practical and cost-effective means to replicate solar effects. The methodology combines controlled experimental tests in a climatic chamber with outdoor tests under natural solar irradiance and ambient conditions. A thermal model of the cabin is calibrated and validated using the climatic chamber experiments, demonstrating maximum errors not exceeding 3.5 °C and mean absolute errors (MAEs) below 1.86 °C, showcasing the model's high precision. Based on the results obtained from the model, an exponential function was derived that links the vehicle cabin temperature to solar irradiance. Finally, a heating function is defined, which allows estimating the temperature profile of the electric blankets based on the irradiance values, obtaining results very similar to those of the model, with a coefficient of determination of 0.9486. This will allow to accurately predict and control the internal temperature of a vehicle cabin under varying solar irradiance levels.

Large-aperture wide-bandwidth densely populated coherent hydrophone array system for ocean acoustic monitoring

Underwater acoustic monitoring with a large-aperture coherent hydrophone array is advantageous because it enhances signal-to-noise ratio of received signals, provides estimates of signal bearing, and enhances signal detection ranges by one to two orders of magnitude over that of a single hydrophone. A large aperture coherent hydrophone array system comprising &amp;gt;160 elements has been developed inhouse at Northeastern University. The overall acoustic aperture length is 192 m with array elements nested into multiple uniformly spaced or log spaced subapertures. Hydrophones with integrated broadband pre-amplifiers designed with a linear frequency response from 10 Hz to 50 kHz send differential pair amplified and filtered analog signals to multiple 24-bit, 32-channel analog-to-digital converters with sampling rate that is programmable up to 100 kHz per channel. Array internals are designed using field replaceable pressure tolerant components verified by pressure chamber testing. Forward and aft modules are equipped with non-acoustic sensor elements to provide depth, heading, pitch, roll and temperature measurements. Acoustic aperture telemetry is user datagram protocol (UDP) converted to single-mode fiber for transmission along 600 m of faired tow cable to a shipboard data acquisition system. Examples of passive acoustic data from array deployment in the US Northeast coast are presented illustrating array capabilities.

Development of a Solid, Low-Smoke Rocket Propellant – Smoke Generation Intensity Tests Using a Laser and Photodiode Setup

The work completed and discussed in this paper was to determine the level of smoke generation intensity in a selection of solid rocket propellants developed to minimise the level of generated smoke. This is an important issue for the application of the developed low-smoke propellant in, for example, the sustainer motor of a rocket missile. Reduced smoke generation levels can help to significantly reduce the feasibility of enemy detecting rocket munition launch sites. The authors of this paper developed a test stand that quantified the smoke generation intensity in rocket propellants. The test stand setup, based on the scatter of a laser beam by smoke, measured the smoke generation intensity, including during the operation of a rocket motor. A rocket micromotor was used along with a test chamber to measure the intensity of the smoke generated. It was located directly behind the motor exhaust and provided three laser-photodiode measurement channels. Tests of the smoke generated during the combustion of black powder and a standard mixture of HTPB and AP at a ratio of 20:80 provided reference baselines for the smoke generation intensity tests on the developed rocket propellants. The authors determined the smoke generation intensity of the propellants based on ADN, HTPB, and GAP with various additives. The results produced made it possible to compare the tested materials and select the most preferable materials as measured by their low smoke generation intensity.

Confined buckle propagation of offshore pipelines under external pressure

Offshore pipelines can be protected against collapse and buckling propagation by installing buckle arrestors or restraint cylinders. When the external pressure is high enough, the buckling would penetrate the arrestors or restraint cylinders and propagate along the line inside these protective structures, known as confined buckle propagation. A two-dimensional theoretical model has been proposed to estimate the confined propagation pressure, considering the rigid-perfectly plastic model and the Ramberg-Osgood model, respectively. Subsequently, the hyperbaric chamber test on SS304 confined tubes was conducted under external pressure. The annulus space of test specimens between the internal pipe and the external constraint cylinder was full of high-strength cement mortar and epoxy resin, respectively. Numerical models have been developed to duplicate the local collapse and the confined buckle propagation scenarios, and reasonable consistencies are observed between the tests and the numerical simulations. After that, broad parametric analyses of the confined propagation pressure are implemented to examine the influence of geometry and material property. As a result, an empirical expression is proposed to predict the confined propagation pressure.

Integrated Smart Gas Tracking Device with Artificially Tailored Selectivity for Real-Time Monitoring Food Freshness.

The real-time monitoring of food freshness in refrigerators is of significant importance in detecting potential food spoiling and preventing serious health issues. One method that is commonly reported and has received substantial attention is the discrimination of food freshness via the tracking of volatile molecules. Nevertheless, the ambient environment of low temperature (normally below 4 °C) and high humidity (90% R.H.), as well as poor selectivity in sensing gas species remain the challenge. In this research, an integrated smart gas-tracking device is designed and fabricated. By applying pump voltage on the yttria-stabilized zirconia (YSZ) membrane, the oxygen concentration in the testing chamber can be manually tailored. Due to the working principle of the sensor following the mixed potential behavior, distinct differences in sensitivity and selectivity are observed for the sensor that operated at different oxygen concentrations. Typically, the sensor gives satisfactory selectivity to H2S, NH3, and C2H5OH at the oxygen concentrations of 10%, 30%, and 40%, respectively. In addition, an acceptable response/recovery rate (within 24 s) is also confirmed. Finally, a refrigerator prototype that includes the smart gas sensor is built, and satisfactory performance in discriminating food freshness status of fresh or semi-fresh is verified for the proposed refrigerator prototype. In conclusion, these aforementioned promising results suggest that the proposed integrated smart gas sensor could be a potential candidate for alarming food spoilage.

Study on the Characteristics of Effective Internal Friction Angles of Silty Clay from the Yellow River Delta and the Inverse Method of CPTu Testing

This study focuses on the silty clay of the Yellow River Delta, conducting laboratory experiments to explore the strength characteristics of typical silty clay in the Yellow River Delta. The study utilizes CPTu calibration chamber tests to systematically reveal the features of cone tip resistance (qt), side friction resistance (fs), and pore water pressure (u2) of the silty clay. This research provides a theoretical basis for Delta investigation in the Yellow River region. The study compares the applicability of existing CPTu inversion methods and highlights the NTH method’s advantages in evaluating silty clay’s effective internal friction angle. Supported by indoor calibration chamber tests, the study confirms the reliability of the NTH method in estimating the effective internal friction angle under normally consolidated conditions while also identifying its limitations. These research findings offer data support for the in situ rapid and accurate estimation of design parameters, like the internal friction angle and undrained shear strength of the silty clay in the Yellow River Delta. Moreover, they provide insights for obtaining other crucial in situ data.

Efficient trapping and destruction of SARS-CoV-2 using PECO-assisted Molekule air purifiers in the laboratory and real-world settings

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is transmitted human-to-human via aerosols and air-borne droplets. Therefore, capturing and destroying viruses from indoor premises are essential to reduce the probability of human exposure and virus transmission. While the heating, ventilation, and air conditioning (HVAC) systems help in reducing the indoor viral load, a targeted approach is required to effectively remove SARS-CoV-2 from indoor air to address human exposure concerns. The present study demonstrates efficient trapping and destruction of SARS-CoV-2 via nano-enabled filter technology using the UV-A-stimulated photoelectrochemical oxidation (PECO) process. Aerosols containing SARS-CoV-2 were generated by nebulization inside an air-controlled test chamber where an air purifier (Air Mini+) was placed. The study demonstrated the efficient removal of SARS-CoV-2 (99.98 %) from the test chamber in less than two minutes and PECO-assisted destruction (over 99%) on the filtration media in 1 h. Furthermore, in a real-world scenario, the Molekule Air-Pro air purifier removed SARS-CoV-2 (a negative RT-qPCR result post-running the filter device) from the circulating air in a COVID-19 testing facility. Overall, the ability of two FDA-approved class II medical devices, Molekule Air-Mini+ and Air-Pro air purifiers, to remove and destroy SARS-CoV-2 in indoor settings was successfully demonstrated. The study indicates that as the "tripledemic" of COVID-19, influenza, and respiratory syncytial virus (RSV) overwhelm the healthcare facilities in the USA, the use of a portable air filtration device will help contain the spread of the viruses in close door facilities, such as in schools and daycare facilities.

Optimization researches on the cooling-down process of the linde-hampson refrigeration system for a high-low temperature test chamber

This paper focus on the cooling-down performance of the LHRS for a high-low temperature test chamber, and proposed a new method to optimize the cooling-down process of the LHRS based on a quasi-steady-state simulation model to investigated the optimal MR concentration and the shifting strategy of suction pressure during the cooling-down process. Targeted on the maximum cooling capacity, the optimal suction pressure-evaporating temperature curve at a specified mixed refrigerant concentration can be obtained, which can be matched by the sectional suction pressure adjustment in the practical cooling-down process to reduce the overall cooling-down time. As an example, the fastest overall cooling-down time is achieved using the R50/R1150/R290/R600a mixed refrigerant (0.3/0.4/0.05/0.25 b y mole) and corresponding shifting parameters (including two shifting temperatures and three shifting pressures) for the sectional suction pressure adjustment, when the air temperature in the test chamber is dropped from 20 °C to −80 °C. The investigation results can provide good references for the industrial design of a high-low temperature test chamber. The optimization method used in this paper can also provide references for researches on cooling-down processes of other refrigeration systems using multi-component mixed refrigerants.

Effects of freeze–thaw cycles and the soil water content on carbon and nitrogen changes in different soil types of Heilongjiang Province, China

AbstractTo reveal the influence of freeze–thaw cycles (FTCs) on soil carbon and nitrogen changes, six typical soils in Northeast China were selected as the research objects to conduct a FTC simulation test in an artificial climate chamber. Three soil volumetric water contents (10%, 20%, 30%) and eight FTCs (0, 2, 4, 6, 8, 10, 15, 20) were set. The results showed that the soil organic carbon (SOC) and microbial biomass carbon (MBC) contents of different soil types under the FTCs initially exhibited a downward and then an upward trend, while the dissolved organic carbon (DOC) content exhibited an upward and then a downward trend. Otherwise, the fourth and sixth FTCs were the key points of change. The SOC, MBC and DOC contents in paddy fields were higher than those in dry fields, showing upward and then downward trends spatially from northeast to southwest. The SOC and MBC contents in each soil type were the highest at the 20% water content, and the DOC content gradually increased with increasing water content. The ammonium nitrogen (NH4+‐N) content in different soil types at different water contents under the FTCs showed an upward trend first, then a downward trend and finally an upward trend. The NH4+‐N content in paddy fields was higher than that in dry fields. The nitrate nitrogen (NO3‒‐N) content showed a downward trend first, then an upward trend and finally a downward trend. The NO3‒‐N content in dry fields was higher than that in paddy fields. The NH4+‐N contents in the three soil types on the Sanjiang Plain were significantly higher than those on the Songnen Plain. The NH4+‐N and NO3‒‐N contents showed upward trends with increasing water content, but the differences were not significant. The results have implications for the study of different types of soils and provide references for research on the mechanism of soil carbon and nitrogen transformation in typical farming areas in Northeast China.