Abstract
Underwater acoustic monitoring with a large-aperture coherent hydrophone array is advantageous because it enhances signal-to-noise ratio of received signals, provides estimates of signal bearing, and enhances signal detection ranges by one to two orders of magnitude over that of a single hydrophone. A large aperture coherent hydrophone array system comprising >160 elements has been developed inhouse at Northeastern University. The overall acoustic aperture length is 192 m with array elements nested into multiple uniformly spaced or log spaced subapertures. Hydrophones with integrated broadband pre-amplifiers designed with a linear frequency response from 10 Hz to 50 kHz send differential pair amplified and filtered analog signals to multiple 24-bit, 32-channel analog-to-digital converters with sampling rate that is programmable up to 100 kHz per channel. Array internals are designed using field replaceable pressure tolerant components verified by pressure chamber testing. Forward and aft modules are equipped with non-acoustic sensor elements to provide depth, heading, pitch, roll and temperature measurements. Acoustic aperture telemetry is user datagram protocol (UDP) converted to single-mode fiber for transmission along 600 m of faired tow cable to a shipboard data acquisition system. Examples of passive acoustic data from array deployment in the US Northeast coast are presented illustrating array capabilities.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.