Alcohol Research Articles

FTIR and GC-MS analyses of raw materials produced from food wastes used in synthesis of biofilms

The present study carried out the GC-MS and FTIR analyses of raw materials (ripe plantain peel powder, cassava starch, glycerol, acetic acid (vinegar) and eggshell powder) produced from food wastes that are used in production of biofilm. The GC-MS results revealed the presence of pentadecane, bis (2-methylpropyl) ester and benzoic acid, 3-(2-Hydroxy-6-methylphenyl)-4(3H)-quinazolinone). The FTIR analysis revealed 17 peaks for glycerol, 16 peaks for vinegar, 15 peaks for cassava starch, 16 peaks for eggshell; representing the functional groups of ether, ethene, amine, carboxylic acid, nitriles, methylene cyclic ester, primary, secondary and tertiary alcohols common to hydrocarbons. The presence of carboxylic acid was important for enhancing the mechanical and chemical properties of biofilms thereby making them viable alternatives to petroleum-based plastics. Amines contributed to the flexibility, strength, and thermal degradation resistance of biofilms, thus aiding in their biodegradability. In conclusion, the study showed that the raw materials possessed biological activities and their functional groups indicated that the raw materials are safe to humans and the environment.

Synthesis of plantain peel powder-based biofilm

The present study investigated the use of ripe plantain peel powder, crude glycerol, vinegar, egg shell powder and cassava starch as source raw materials for producing plantain peel-based biodegradable biofilm (P-BF). The synthesized biofilm was characterized by chemical test (FTIR, GC-MS, morphology test, water absorption property, biodegradation test, solubility test and swelling test) and mechanical test (ultimate tensile test, flexural, hardness test, % elongation and thermogravimetric analysis). Results showed successful production of P-BF. A non-plantain bioplastic (NP-BF) served as control. The FTIR analysis showed eight functional groups; ether, ethene, amine, carboxylic acid, nitriles, methylene, cyclic ester, primary, secondary and tertiary alcohols common to hydrocarbons. The biodegradation test showed the P-BF degraded at the same pace as NP-BF which degraded on the 6th day of the test. The mechanical test showed P-BF had higher thermal stability and water absorption property compared to the NP-BF. However, P-BF showed lower ultimate tensile test, flexural, hardness test, percentage elongation compared to the NP-BF. Morphology test showed that there was uneven distribution of constituents materials in P-BF compared to the NP-BF which affected its mechanical properties. In conclusion, the study successfully produced plantain peel-based biodegradable biofilm with good mechanical properties, biodegradability, thermal stability, fair water absorption property.

Improved conditions for the synthesis of tertiary fluorides using a KF/H2SO4 combination

In this paper, we report the deoxyfluorination of tertiary alcohol using a simple combination of potassium fluoride and sulfuric acid. These cheap and widely available reagents allow for the synthesis of tertiary fluorides in good to excellent yields. Extension of the reaction to other functional groups such as alkenes, acetates and ethers have also been studied.

Therapeutic intervention of vitamin B12 in mitigating chronic alcoholism induced alterations in adult zebrafish (Danio rerio): a holistic in vivo approach

Background Chronic alcoholism refers to the unpleasant symptoms directly resulting from excessive drinking. Increased alcohol metabolites and an unbalanced oxidative state are likely to blame for the reported effects under these circumstances. According to preclinical and clinical research, vitamin B12 can act on several organ systems with demonstrated neuroprotective, antioxidant, and glutamate modulating properties. Objective This research sought to examine the ameliorative effects of vitamin B12 (VtB12) in persistent alcohol (AlOH) exposed adult zebrafish with the help of following parameters like the anxiety related behavior test, Oxidative stress, and antioxidant assays, histological and immunofluorescence analysis. Methods Zebrafish pretreated with 0.40% AlOH (v/v) for 120 min (+AlOH) or not (−AlOH), were exposed for 6 h to home tank water (−VtB12) or to 59 µg-VtB12/kg-fish food (+VtB12) to analyze anxiety behavior in the geotaxis (novel tank) test as well as the oxidative brain damage in the adult zebrafish. Results Adult zebrafish exposed to chronic AlOH showed a decrease in the distance travelled, average and mobility speed, and increased the average frozen time, the explored area, and total no. of the site explored in the trapezoid tank. AlOH exposure also resulted in oxidative damage, enhanced lipid peroxidation, advanced oxidative protein products, decreased enzymatic and non-enzymatic antioxidant activities, and enhanced reactive oxygen species generation. Additionally, VtB12 supplementation improved neurogenesis, evident in increased Nissl cell numbers and NeuN expression in the brain. Conclusion Chronic alcoholism may be effect on the brain cells as well as on the neuro-behavior of zebrafish. This research demonstrated that VtB12 shows promise as a neuroprotective agent against chronic alcoholism induced alterations in zebrafish’s brain.

Development of a Stable Lyophilized Cyclophosphamide Monohydrate Formulation Using Non-Aqueous Solvents.

To ensure product stability, it is critical to maintain the monohydrate state of cyclophosphamide following lyophilization, as this is the most stable solid form of the Cyclophosphamide. On the other hand, because of their limited aqueous solubility and stability, non-aqueous solvents are preferred for determining the composition and stability of bulk solutions. Hence, the purpose of this study was to use non-aqueous solvents for determining the composition and stability of bulk solutions, and to shorten the lyophilization process by retaining the cyclophosphamide monohydrate. Furthermore, prior to selecting the solvent for the bulk solution consisting of 90:10 tertiary butyl alcohol (TBA) and acetonitrile (ACN), various factors were taken into account, including the freezing point, vapor pressure of solvents, solubility, and stability of cyclophosphamide monohydrate. The concentration of the bulk solution was adjusted to 200mg/mL in order to optimize the fill volume, enhance sublimation rates at lower temperatures during primary drying, and eliminate the need for secondary drying. The differential scanning calorimetry (DSC) measurements of bulk solution were used to improve the lyophilization cycle. The lyophilization cycle opted was freezing at a temperature of -55°C with annealing step at -22°C by which the reconstitution time was significantly reduced. The drying was performed at below - 25°C while maintaining a chamber pressure of 300 mTorr. The complete removal of non-aqueous solvents was achieved by retaining water within the system. The presence of cyclophosphamide monohydrate was confirmed using X-ray diffraction (XRD). The reduction of lyophilization process time was established by conducting mass transfer tests and evaluating the physicochemical properties of the pharmaceutical product. Using non-aqueous solvents for freeze-drying cyclophosphamide is a viable option, and this study provides significant knowledge for the advancement of future generic pharmaceuticals.

Visible Light‐Promoted Aerobic Oxidation of α‐Silyl Styrenes with Alcohols

Comprehensive SummaryA mechanistically distinctive visible‐light‐promoted metal‐free aerobic oxidation of alkenyl silanes with alcohols was disclosed to efficiently construct α‐alkoxy ketones under mild conditions. The primary, secondary, and tertiary alcohols could be used as reactants. The protocol could be carried out on a gram‐scale. Various derivatizations of products could be conducted. Mechanistic studies indicated the reaction was initiated by single‐electron oxidation of the alkenyl silanes, rather than radical addition to alkenyl silanes.

Isothiourea-Catalysed Acylative Kinetic Resolution of Tertiary Pyrazolone Alcohols.

The development of methods for the selective acylative kinetic resolution (KR) of tertiary alcohols is a recognised synthetic challenge with relatively few successful substrate classes reported to date. In this manuscript, a highly enantioselective isothiourea-catalysed acylative KR of tertiary pyrazolone alcohols is reported. The scope and limitations of this methodology have been developed, with high selectivity observed across a broad range of substrate derivatives incorporating varying substitution at N(2)-, C(4)- and C(5)-, as well as bicyclic constraints within the pyrazolone scaffold (30 examples, selectivity factors (s) typically >100) at generally low catalyst loadings (1 mol%). The application of this KR method to tertiary alcohols derived from a natural product (geraniol), alongside pharmaceutically relevant drug compounds (indomethacin, gemfibrozil and probenecid), with high efficiency (s > 100) is also described. The KR process is readily amenable to scale up, with effective resolution on a 50 g (0.22 mol) scale demonstrated. The key structural motif leading to excellent selectivity in this KR process has been probed through computation, with an NC=O•••isothiouronium interaction observed within the favoured transition state. Similarly, the effect of C(5)-aryl substitution that leads to reduced experimental selectivity is probed, with a competitive π-isothiouronium interaction identified as leading to reduced selectivity.

TsOH-catalyzed dehydroxylative cross-coupling of alcohols with phenols: rapid access to propofol derivatives.

Modification of the parent structure of molecules often alters their physicochemical properties and biological activities. Herein, a practical, efficient, and highly regioselective C-H alkylation of phenols with alcohols via dehydroxylative cross-coupling was developed to produce para-alkylated phenols with excellent regioselectivities and yields, using which propofol derivatives were rapidly synthesized. This process is performed under mild and simple conditions and is well-compatible with a variety of alcohols (secondary and tertiary benzylic alcohols as well as allyl alcohols) as alkylated agents. In addition, high aryl ether derivatives were also obtained using this catalytic system.

Green Synthesis of Diphenyl-Substituted Alcohols Via Radical Coupling of Aromatic Alcohols Under Transition-Metal-Free Conditions.

Alcohols are common alkylating agents and starting materials alternative to harmful alkyl halides. In this study, a simple, benign and efficient pathway was developed to synthesize 1,3-diphenylpropan-1-ols via the β-alkylation of 1-phenylethanol with benzyl alcohols. Unlike conventional borrowing hydrogen processes in which alcohols were activated by transition-metal catalyzed dehydrogenation, in this work, t-BuONa was suggested to be a dual-role reagent, namely, both base and radical initiator, for the radical coupling of aromatic alcohols. The cross-coupling reaction readily proceeded under transition metal-free conditions and an inert atmosphere, affording 1,3-diphenylpropan-1-ol with an excellent yield. A good functional group tolerance in benzyl alcohols was observed, leading to the production of various phenyl-substituted propan-1-ol derivatives in moderate-to-good yields. The mechanistic studies proposed that the reaction could involve the formation of reactive radical anions by base-mediated deprotonation and single electron transfer.

Phosphotungstic Acid-Supported Hercynite: A Magnetic Nanocomposite Catalyst for the Selective Esterification of Chloroacetic Acid.

This study presents the synthesis and characterization of a novel phosphotungstic acid-functionalized hercynite@SiO2 magnetic core-shell through a three-step procedure. The characterization involved various analyses including Fourier-transform infrared spectroscopy, P-XRD, TGA-DSC, EDAX, inductively coupled plasma optical emission spectroscopy, elemental mapping, scanning electron microscopy, transmission electron microscopy, and value stream mapping. The catalytic performance of the hercynite@SiO2-PTA nanomagnetic composite was examined in the esterification of chloroacetic acid. Results indicate that the developed procedure enables the production of chloroacetic acid esters using a wide range of primary, secondary, and tertiary aliphatic and aromatic alcohols with good to excellent yields and high selectivity. The significance of this work lies in its straightforward synthesis method, minimal time requirement, reduced utilization of hazardous chemicals, and cost-effectiveness. Additionally, the catalyst exhibited magnetic recyclability for up to five cycles with negligible loss in activity. Notably, the synthesized catalyst demonstrated nontoxicity and environmental friendliness.

Removal and Oxidation of Low Concentration tert-Butanol from Potable Water using Nonthermal Plasma Coupled with Metal Oxide Adsorption.

Taste and odor are crucial factors in evaluating the quality of drinking water for consumers. Geosmin is an example of a pollutant commonly found in potable water responsible for earthy and musty taste, and odor even at low concentrations. We have investigated the use of a hybrid two-step adsorption-mineralization process for low-level volatile organic compounds removal from potable water using dielectric barrier discharge over common metal oxides (MO). The system proposed is a proof of principle with tert-butanol (TBA) used as a model compound for geosmin removal/degradation during wastewater treatment when combined with an appropriate metal oxide adsorbent. Initial assessments of the adsorption properties of titania by density functional theory (DFT) calculations and experimental tests indicated that the adsorption of geosmin and TBA with water present results in only weak interactions between the sorbate and the metal oxide. In contrast, the DFT results show that alumina could be a suitable adsorbent for these tertiary alcohols and were reinforced by experimental studies. We find that while there is a competitive effect between the water and TBA adsorption from gaseous/liquid feed, the VOC can be removed, and the alumina will be regenerated by the reactive oxygen species (ROS) produced by a dielectric barrier discharge (DBD). The use of alumina in conjunction with NTP leads to efficient degradation of the adsorbate and the formation of oxygenated intermediates (formates, carbonates, and carboxylate-type species), which could then be mineralized for the regeneration of the adsorbent. A reaction mechanism has been proposed based on the in-situ infrared measurements and DFT calculations, while the removal of TBA with conventional heating is indicative of a gradual desorption process as a function of temperature rather than the destruction of the adsorbate. Furthermore, steady performance was observed after several adsorption-regeneration cycles, indicating no alteration of the adsorption properties of alumina during the NTP treatment and demonstrating the potential of the approach to be applied in the treatment of high throughput of water, without the challenges faced by the biocatalysts or formation of toxic byproducts.

Ready Access to [5,6,5]-Trioxa-spiro and Fused Ketals via Ag-Catalyzed Cascade Annulation of 4-Pentyn-1-ols and Aldehydes.

In this study, we unveil the versatility of 4-pentyn-1-ols as carbonyl surrogates for the unprecedented synthesis of diverse oxygen heterocycles, including [5,6,5]-bis-spiroketals (trioxadispiroketals) and [5,6,5]-furano-spiroketals related to bioactive natural products. These reactions commence with the π-activation-induced intramolecular hydroalkoxylation of 4-pentyn-1-ols, yielding cyclic enol ethers, which undergo subsequent three-component annulation with aldehydes in a [2+2+1+1] fashion, resulting in the formation of [5,6,5]-bis-spiroketals. Notably, the distinctive steric features of alkynyl alcohols, particularly those with a secondary or tertiary alcohol functionality, dictate divergent reaction pathways, leading to the formation of [5,6,5]-furano-spiroketals.

Sub-nanometric ruthenium clusters prepared by solid-state dispersion for catalytic selective aerobic oxidation of aromatic alcohols

The selective aerobic oxidation of alcohols to corresponding aldehydes is one of the most important challenges in the green chemical industry. In this work, Ru/Al2O3-SSD catalyst with highly dispersed metallic ruthenium clusters (average particle size of 0.97 nm) was prepared by solid-state dispersion (SSD) for efficient selective aerobic oxidation of aromatic alcohols to aldehydes. Compared with the counterpart catalyst Ru/Al2O3-IM prepared by wet impregnation (IM), this catalyst has smaller metal particles (0.97 nm vs. 3.4 nm), resulting in a special electronic structure, and exhibits much higher TOF (234 h−1 vs. 98 h−1) in the aerobic oxidation reaction of benzyl alcohol at 80 °C. The catalyst also shows excellent catalytic activity in the preparation of vanillin by selective aerobic oxidation of vanillyl alcohol at 100 °C, delivering a vanillin yield of 99%. The solid-state dispersion strategy provides an efficient and facile way for the fabrication of high-performance sub-nanometric metal catalysts.

Ceria nanocatalyst-supported oxidative organic transformations of aromatic alcohols and p-nitrotoluene

Hydrothermally derived nanocubes of CeO2(10 nm) were explored as an efficient heterogeneous catalyst in the partial oxidation of aromatic alcohols to the corresponding aldehydes and aerobic oxidation ofp-nitrotoluene top-nitrobenzoic acid. The CeO2nanocatalyst was characterized by x-ray diffraction, transmission electron microscopy (TEM), energy dispersive spectroscopy, x-ray photoelectron spectroscopy, Brunauer-Emmett-Teller (BET) surface area analysis, Fourier transform infrared spectroscopy, thermal gravimetric analysis and ultraviolet-visible spectroscopy. TEM/high-resolution TEM micrographs reveal a morphology of mostly cubic nanostructures with exposed highly active {100} and {110} facets. The surface area of nanoceria was determined by BET analysis and found to be 33.8 m2g-1. To demonstrate the universality of the catalytic system, the selective oxidation of different substrates of benzylic alcohol and complete oxidation ofp-nitrotoluene was investigated under mild conditions. Absolute selectivity towards their respective aldehydes was found to be 99.50% (benzaldehyde), 90.18% (p-chlorobenzaldehyde), 99.71% (p-nitrobenzaldehyde), 98.10% (p-fluorobenzaldehyde), 94.66% (p-anisaldehyde) and 86.14% (cinnamaldehyde). Moreover, the catalytic oxidative transformation of nitrotoluene results in 100% conversion with 99.29% selectivity towards nitrobenzoic acid.

A scalable and universal strategy for constructing long-term antibacterial coatings with lubricant property on medical catheters

Medical catheters might cause a high morbidity of catheter-associated urinary tract infections (CAUTIs) because of the bacterial adhesion onto the surface. In addition, the inherent hydrophobicity of catheter materials exacerbates mechanical friction, leading to tissue damage. Therefore, coatings with integrated antibacterial and lubricative properties are appealing approaches to mitigate these challenges. In this study, a kind of polyurethane (PU)-based coatings were developed and prepared on medical catheters, which were modified with a cationic antibacterial agent, quaternized ammonium-modified methyldiethanolamines (QMDEAs). Due to the reaction among castor oil tertiary alcohols, isocyanates and QMDEAs, a polymer cross-linked network was fabricated, in which a hydrophilic polymer, polyvinylpyrrolidone (PVP), was added to form a semi-interpenetrating network. The structures of the coatings were regulated by adjusting the lengths of alkyl chain of QMDEAs, concentrations of pre-coated solutions, ratios of QMDEA:isocyanate, and parameters of preparation process. Among the coatings we prepared, PU-C10–46 possessed the optimized performances, which reduced the dynamic friction coefficient by 91.38 % and had the antibacterial efficiency of 99.9 % with good biocompatibility. The in vivo anti-infective properties of PU-C10–46 were also demonstrated by an infected animal model. Furthermore, PU-C10–46 was produced in an industrial equipment, and the large-scaled industrial products also had the same performances. This work could provide a promising strategy to deal with the challenges of medical catheter-associated infection.

Ferulic acid triggering a co-production of 4-vinyl guaiacol and fumaric acid from lignocellulose-based carbon source by Rhizopus oryzae

Plant secondary metabolites have attracted considerable attention due to the increasing demand for finite fossil resources and environmental concerns. However, the biosynthesis of aromatic aldehydes or alcohols from renewable resources remains challenging and costly. This study explores a novel approach performed by the aromatic catabolizing organism Rhizopus oryzae, which enables a ferulic acid-activated co-production of 4-vinyl guaiacol (4-VG) and fumaric acid. The strain produced 4.60 g/L 4-VG and 11.25 g/L fumaric acid from a mixed carbon source of glucose and xylose, suggesting that this new pathway allows the potential production of natural 4-VG from low-cost substrates. This green route, which utilizes Rhizopus oryzae's ability to efficiently convert various renewable resources into valuable chemicals, paves the way for improved catalytic efficiency in 4-VG production.

In-Column Dehydration Benzyl Alcohols and Their Chromatographic Behavior on Pyridinium-Based Ionic Liquids as Gas Stationary Phases.

At present, stationary phases based on ionic liquids are a promising and widely used technique in gas chromatography, yet they remain poorly studied. Unfortunately, testing of "new" stationary phases is often carried out on a limited set of test compounds (about 10 compounds) of relatively simple structures. This study represents the first investigation into the physicochemical patterns of retention of substituted (including polysubstituted) aromatic alcohols on two stationary phases of different polarities: one based on pyridinium-based ionic liquids and the other on a standard polar phase. The retention order of the studied compounds on such stationary phases compared to the standard polar phase, polyethylene glycol (SH-Stabilwax), was compared and studied. It was shown that pyridinium-based ionic liquids stationary phase has a different selectivity compared to the SH-Stabilwax. Using a quantitative structure-retention relationships (QSRR) study, the differences in selectivity of the two stationary phases were interpreted. Using CHERESHNYA software, the importance of descriptors on different stationary phases was evaluated for the same data set. Different selectivity of the stationary phases correlates with different contributions of descriptors for the analytes under study. For the first time, we show that in-column dehydration is observed for some compounds (mostly substituted benzyl alcohols). This effect is worthy of further investigation and requires attention when analyzing complex mixtures. It suggests that when testing "new" stationary phases, it is necessary to conduct tests on a large set of different classes of compounds. This is because, in the case of using ionic liquids as an stationary phase, a reaction between the analyte and the stationary phase is possible.

Screening diluents to optimize cesium contaminant separation using t-BAMBP extractant

The widespread use of nuclear energy has raised concerns about nuclear safety and radioactive waste management, particularly due to the release of radioactive cesium. This study investigates the use of t-BAMBP (4-tert-butyl-2-(α-methylbenzyl) phenol) for the extraction and separation of cesium from simulate high concentration cesium containing wastewater, focusing on the selection of suitable diluents to enhance the efficiency of the process. We performed a systematic study using density functional theory (DFT) calculations to evaluate the intrinsic properties and interactions of various common diluents with t-BAMBP. The diluents studied include aromatic hydrocarbons (benzene, toluene, xylene), alkanes (cyclohexane, hexane, heptane), and alcohols (hexanol, octanol). Our computational results revealed that cyclohexane is the most suitable diluent due to its moderate solvation-free energy, high nonpolarity, and optimal balance between solubility and reactivity. Experimental validation confirmed the computational findings. The cyclohexane-diluted t-BAMBP system achieved the highest cesium extraction efficiency of over 94 %, with a separation factor (βCs/K) of 767.67. Cyclohexane demonstrated the lowest toxicity and cost among the diluents evaluated, making it a safer and more economical choice for practical applications. The results of this study provide a comprehensive theoretical and experimental basis for the selection of diluents in the t-BAMBP extraction system, offering insights for the sustainable utilization of cesium resources and effective management of radioactive waste.

Mn(I)-Catalyzed Carbon-Skeleton Rearrangement of Tertiary Alcohol-Based Aldol Reaction with Aldehydes.

A Mn-catalyzed ligand-directed Csp3-Csp2 coupling of tertiary allylic alcohols with arylaldehydes has been developed. The method provides an efficient approach to access 1,5-diarylpent-1-en-3-ones via carbon-skeleton rearrangement-based aldol reaction.

Amphiphilic Janus Particles for Aerobic Alcohol Oxidation in Oil Foams.

Amphiphilic Janus silica particles, tunable with oleophobic-oleophilic properties and low fluorine content (8 wt % F), exhibited prominent foamability for a variety of aromatic alcohols at low particle concentrations (<1 wt %) compared to randomly functionalized silica particles. When selectively loaded with Pd nanoparticles on the oleophilic hemisphere, the particles displayed more than a 2-fold increase in catalytic activity for the aerobic oxidation of benzyl alcohol compared to nonfoam bulk catalysis under ambient O2 pressure. The particles were conveniently recycled with high foamability and catalytic activity maintained for at least five consecutive runs.