Tert-butyl Ester Research Articles

Mechanistic Studies of the Deslongchamps Annulation.

The Cs2CO3-mediated annulations ("Deslongchamps annulations") of three spirocyclic benzoquinone monoketals 5b-d with an ester or acyl substituent at C-2 to two tert-butyl esters of γ,δ-unsaturated β-ketocarboxyl acids ("Nazarov reagents"; 2a,b) were monitored 1H NMR spectroscopically. This revealed that a primary product, by all likelihood the Michael adduct, forms fast and prior to the appearance of the Deslongchamps adduct. These primary products form reversibly. This was proved by two crossover and four scavenging experiments. Therein, components already incorporated in one of the mentioned primary products ended up in Deslongchamps adducts different from the one, which would have resulted if the respective primary product had reacted alone. However, these experiments leave open whether our primary products are intermediates en route to Deslongchamps products or whether they represent dead ends.

Base-catalyzed selective esterification of alcohols with unactivated esters.

A practical and efficient base-catalyzed esterification has been developed for the facile synthesis of a broad range of esters from simple alcohols with unactivated tert-butyl esters. This protocol could be conducted at mild conditions, providing esters in high to excellent yields with good functional tolerance. Mechanistic studies provided evidence of an exchange of the tert-butyl alkoxide metal with the alcohol, producing a new alkoxide to participate in the transesterification reaction.

Impact of ClO2 pre-oxidation on the formation of CX3R-type DBPs from tyrosine-based amino acid precursors during chlorination and chloramination

ClO2 is frequently used as a pre-oxidant in water treatment plants. However, the effects of ClO2 pre-oxidation on disinfection by-product (DBP) formation, especially the highly toxic nitrogenous DBPs, during subsequent chlor (am)ination have not been studied thoroughly. There is also limited information about DBP formation from combined amino acids (AAs), which are more abundant than free AAs in source waters. Many typical DBPs (including representative N-DBPs) have a similar structure of “CX3R” (X = H, Cl, Br or I). In the study, tyrosine and forms representing its reactivity in combined AAs (tyrosine tert-butyl ester and Boc-tyrosine) were selected as model precursors. The formation of various regulated and unregulated CX3R-type DBPs from ClO2 pre-oxidation and subsequent chlor (am)ination were studied at a wide-range of ClO2 and chlor (am)ine doses (ClO2/precursors and chlor (am)ine/precursors are at the range of 0–2.5 and 1–20 [Mol/Mol], respectively). Chloroform and chloral hydrate (CH) yields increased with chlorine dose, while haloacetonitrile and haloacetamide maximized at median chlorine dose (Cl2/Precursors = 10). All DBP yields increased with chloramine dose. ClO2 pre-oxidation increased chloroform, haloacetonitrile, trichloronitromethane and CH yields during chlorination, but ClO2 increased chloroform, CH, trichloroacetamide while decreased dichloroacetonitrile and trichloronitromethane yields during chloramination. The overall toxicity of the formed DBPs was evaluated by cytotoxicity index (CTI). ClO2 pre-oxidation increased CTI from all precursors during post-chlorination while reduced it during post-chloramination. Results imply that ClO2 is probably more suitable for use in combination with chloramination disinfection, rather than chlorination, in the integrated control of CX3R-type DBPs from source waters abundant in AAs.

The chromatic shift of 1-D photonic crystal films with swelling time due to chiral amine ester ionic liquids

ABSTRACTMost photonic crystal films have been studied with various ionic liquids. The object of our research was to examine the expression of one-dimensional lamellar photonic crystal color with different chiral amine ester ionic liquids. The reflection colors of the photonic crystals were measured using UV-visible spectroscopy. One-dimensional lamellar photonic crystals were generated from polystyrene-block-poly(2-vinylpyridine) (52K–57K) dissolved in tetrahydrofuran. Chiral amine ester ionic liquids were synthesized from l-alanine tert-butyl ester hydrochloride. These were complexed with bis(trifluoromethane)sulfonamide lithium salt. The annealed photonic films were swelled with the ionic liquids. The color development was rather slow and changed with swelling time.

Synthesis of Dipeptides by Boronic Acid Catalysis

We have found that a boronic acid catalyzed amidation of an N-hydroxy amino acid methyl ester with amino acid tert-butyl esters gave N-hydroxy dipeptide derivatives in good yields without any racemization. The protecting groups on the nitrogen atom could be easily removed by heterogeneous hydrogenation conditions.

Influence of Tail Groups during Functionalization of ZnO Nanoparticles on Binding Enthalpies and Photoluminescence.

We report on the tailoring of ZnO nanoparticle (NP) surfaces by catechol derivatives (CAT) with different functionalities: tert-butyl group (tertCAT), hydrogen (pyroCAT), aromatic ring (naphCAT), ester group (esterCAT), and nitro group (nitroCAT). The influence of electron-donating/-withdrawing properties on enthalpy of ligand binding (ΔH) was resolved and subsequently linked with optical properties. First, as confirmed by ultraviolet/visible (UV/vis) and Fourier transform infrared (FT-IR) spectroscopy results, all CAT molecules chemisorbed to ZnO NPs, independent of the distinct functionality. Interestingly, the ζ-potentials of ZnO after functionalization shifted to more negative values. Then, isothermal titration calorimetry (ITC) and a mass-based method were applied to resolve the heat release during ligand binding and the adsorption isotherm, respectively. However, both heat- and mass-based approaches alone did not fully resolve the binding enthalpy of each molecule adsorbing to the ZnO surface. This is mainly due to the fact that the Langmuir model oversimplifies the underlying adsorption mechanism, at least for some of the tested CAT molecules. Therefore, a new, fitting-free approach was developed to directly access the adsorption enthalpy per molecule during functionalization by dividing the heat release measured via ITC by the amount of bound molecules determined from the adsorption isotherm. Finally, the efficiency of quenching the visible emission caused by ligand binding was investigated by photoluminescence (PL) spectroscopy, which turned out to follow the same trend as the binding enthalpy. Thus, the functionality of ligand molecules governs the binding enthalpy to the particle surface, which in turn, at least in the current case of ZnO, is an important parameter for the quenching of visible emission. We believe that establishing such correlations is an important step toward a more general way of selecting and designing ligand molecules for surface functionalization. This allows developing strategies for tailored colloidal surfaces beyond empirically driven formulation on a case by case basis.

Total Synthesis of Paralemnolide A

The first total synthesis of tricyclic bisnorsesquiterpene paralemnolide A, isolated from the soft coral Paralemnalia thyrsoides, was achieved. This synthesis features the lactonization of the cyclohexene derivative having a tert-butyl ester via stereoselective epoxidation followed by treatment with a Brønsted acid and construction of the novel tricyclic skeleton by an intramolecular Reformatsky-Honda reaction.

Decarbethoxylative Arylation Employing Arynes: A Metal-Free Pathway to Arylfluoroamides.

An efficient, metal-free decarbethoxylative arylation protocol for the synthesis of α-aryl-α-fluoroamides from fluoromalonamates, under ambient reaction conditions using aryne as an electrophilic arylating agent, is reported. This decarbethoxylative arylation proceeds under mild conditions and provides a practical and effective entry to a wide range of α-aryl-α-fluoroacetamides. Interestingly, the use of the tert-butyl ester of fluoromalonamate prevented the otherwise rapid decarboxylation step, affording the arylated fluoromalonamate in moderate yield.

Modification of α-Cyclodextrin Polyrotaxanes by ATRP for Conjugating Drug and Prolonging Blood Circulation.

To enhance the water solubility of α-cyclodextrin (CD) polyrotaxanes (PRs) and achieve effective drug loading, we polymerized 2-hydroxyethyl methacrylate and 2-tert-butoxy-N-(2-(methacryloyloxy)ethyl)-N,N-dimethyl-2-oxoethanaminium successively from a α-CD-PR-based macroinitiator by a two-step ATRP followed by cleaving the tert-butyl ester groups, providing a α-CD-PR-cored multiarm copolymer. The multiarm copolymer had reactive hydroxyl pendant groups in the inner block of the arms, which were used to incorporate antitumor agent paclitaxel (PTX). The outer block of the arms was zwitterionic poly(carboxybetaine) and had high hydrophilicity and zero net electric charge in a neutral environment. This feature endowed the PTX-loaded multiarm copolymer with high water solubility and prolonged blood circulation. The blood circulation half-life of the PTX-loaded multiarm copolymer was determined to be about 7.7 h versus 18.8 ± 1.5 min of the reported blood circulation half-life of the PTX injected as commercial Taxol. The PTX-loaded multiarm copolymer was proved to be efficient in tumor accumulation and suppression.

End Functionalized Nonionic Water-Dispersible Conjugated Polymers.

2,7-Dibromofluorene monomers carrying two or four oligo(ethylene glycol) (OEG) side chains are synthesized. Heck coupling between the monomers and 1,4-divinylbenzene followed by end capping with [4-(4-bromophenoxy)butyl]carbamic acid tert-butyl ester leads to two nonionic water-dispersible poly(fluorene-alt-1,4-divinylenephenylene)s end-functionalized with amine groups after hydrolysis. In water, the polymer with a lower OEG density (P1) has poor water dispersibility with a quantum yield of 0.24, while the polymer with a higher OEG density (P2) possesses excellent water-dispersibility with a high quantum yield of 0.45. Both polymers show fluorescence enhancement and blue-shifted absorption and emission maxima in the presence of surfactant sodium dodecyl sulfate and dodecyltrimethylammonium bromide. The polymers are also resistant to ionic strength with minimal nonspecific interactions to bovine serum albumin. When biotin is incorporated into the end of the polymer backbones through N-hydroxysuccinimide/amine coupling reaction, the biotinylated polymers interact specifically with streptavidin on solid surface.

Excited state dynamics of bis-dehydroxycurcumin tert-butyl ester, a diketo-shifted derivative of the photosensitizer curcumin.

Bis-dehydroxycurcumin tert-butyl ester (K2T23) is a derivative of the natural spice curcumin. Curcumin is widely studied for its multiple therapeutic properties, including photosensitized cytotoxicity. However, the full exploitation of curcumin phototoxic potential is hindered by the extreme instability of its excited state, caused by very efficient non radiative decay by means of transfer of the enolic proton to the nearby keto oxygen. K2T23 is designed to exhibit a tautomeric equilibrium shifted toward the diketo conformers with respect to natural curcumin. This property should endow K2T23 with superior excited-state stability when excited in the UVB band, i.e., in correspondence of the diketo conformers absorption peaks, making this compound an interesting candidate for topical photodynamic therapy of, e.g., skin tumors or oral infections. In this work, the tautomeric equilibrium of K2T23 between the keto-enolic and diketo conformers is assessed in the ground state in several organic solvents by UV-visible absorption and by nuclear magnetic resonance. The same tautomeric equilibrium is also probed in the excited-state in the same environments by means of steady-state fluorescence and time-correlated single-photon counting measurements. These techniques are also exploited to elucidate the excited state dynamics and excited-state deactivation pathways of K2T23, which are compared to those determined for several other curcuminoids characterized in previous works of ours. The ability of K2T23 in photosensitizing the production of singlet oxygen is compared with that of curcumin.

Influence of thermocleavable functionality on organic field-effect transistor performance of small molecules

Diketopyrrolopyrrole based donor-acceptor-donor conjugated small molecules using ethylene dioxythiophene as a donor was synthesized. Electron deficient diketopyrrolopyrrole unit was substituted with thermocleavable (tert-butyl acetate) side chains. The thermal treatment of the molecules at 160°C eliminated the tert-butyl ester group results in the formation of corresponding acid. Optical and theoretical studies revealed that the molecules adopted a change in molecular arrangement after thermolysis. The conjugated small molecules possessed p-channel charge transport characteristics in organic field effect transistors. The charge carrier mobility was increased after thermolysis of tert-butyl ester group to 5.07×10−5cm2/Vs.

Enantioselective C-C Bond Formation Enhanced by Self-Assembly of Achiral Surfactants.

The use of achiral surfactant assemblies as a reaction platform for an alkylation reaction resulted in a high enantiomeric excess. Dilauryldimethylammonium bromide (DDAB) vesicles were modified with cholesterol to promote alkylation of N-(diphenylmethylene)glycine tert-butyl ester (DMGBE) with benzyl bromide, resulting in high conversion (∼90%) and high enantioselectivity (up to 80%). The R-enantiomer was formed on using the DDAB vesicles, whereas the use of phospholipid liposomes prepared from 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) produced an excess of the S-enantiomer. Considering the chemical structures of the reaction substrates and amphiphiles as well as the membrane structures and properties of DDAB vesicles and DOPC liposomes, it is suggested that the enantiomeric excesses result from the location of the quaternary amine of the amphiphiles and the DMGBE at the outer surface of the membrane. We show that the enantioselective reaction at the surface of the self-assembly could be regulated by adjusting the chemical structures and resulting membrane properties of the self-assembly.

Total Synthesis of Microcystin-LF and Derivatives Thereof.

Microcystins (MCs) are highly toxic natural products which are produced by cyanobacteria. They can be released to the water during harmful algal blooms and are a serious threat to animals and humans. Described is the total synthesis of the cyanotoxin microcystin-LF (MC-LF, 1a) and two derivatives thereof. Deuterated derivative 1b is of interest as an internal standard during MC quantification in biological samples by mass spectrometry and alkyne-labeled 1c can be employed for toxin derivatization by click chemistry with an azide-containing reporter molecule or as an activity-based probe to identify interaction partners. Application of tert-butyl ester protecting groups for erythro-β-d-methylaspartic acid and γ-d-glutamic acid were key for an isomerization-free synthesis. The analytical data of synthetic MC-LF were identical to those of an authentic sample of the natural product. All derivatives 1a-c were determined to be potent inhibitors of protein phosphatase-1 with similar activity.

Physicochemical studies on bioactive Cr(III) coordination compounds with esters of hydrazine carboxylic acid as hetero donor ligands

Reaction between hydrazine derivative ligands (HrzE) or (HrzB) and chromium salt in 1:2 (metal:ligand) molar ratio yielded monometallic trivalent coordination compounds with general formula [Cr(HrzE)2X2]X and [Cr(HrzB)2X2]X, where (HrzE) = hydrazine carboxylic acid ethyl ester, (HrzB) = hydrazine carboxylic acid tert-butyl ester, and X = Cl−, Br− or F−. Elemental analysis, conductivity measurements, magnetic moment measurements, and various spectroscopic techniques, viz. infrared, ultraviolet–visible, and electrospray ionization mass spectrometry, were applied to illustrate the structure and composition of the coordination compounds. Analytic and conductivity results were consistent with 1:1 electrolytic behavior and the proposed formulas of the coordination compounds. Electronic absorption data and magnetic moment parameters indicated octahedral geometry surrounding the metal ion in the coordination compounds. The in vitro antimicrobial behavior of the ligands and coordination compounds was screened using four bacterial strains (Staphylococcus aureus, Bacillus subtilis, Escherichia coli, and Salmonella typhi) and two fungal strains (Candida parapsilosis and Saccharomyces cerevisiae). The results indicated improved activity of the coordination compounds compared with the free ligands against the studied bacteria and fungi.

Combining Rh-Catalyzed Diazocoupling and Enzymatic Reduction To Efficiently Synthesize Enantioenriched 2-Substituted Succinate Derivatives

We report the development of a modular, one-pot, sequential chemoenzymatic system for the formal enantioselective construction of the C–C bond in 2-aryl 1,4-dicarbonyl compounds. This sequence comprises a rhodium-catalyzed diazocoupling that provides >9:1 selectivity for heterocoupling of two diazoesters and a reduction mediated by an ene-reductase (ER), which occurs in up to 99% enantiomeric excess (ee). The high yield and enantioselectivity of this system result from the preferential generation of an (E)-alkene from the diazo coupling reaction and selective reduction of the (E)-alkene in a mixture of (E) and (Z) isomers by the ER. Screening of a panel of ERs revealed that OPR1 from Lycopersicum esculentum catalyzes the reduction of bulky tert-butyl or benzyl esters to afford chiral diesters that are poised for orthogonal reactions at the two distinct ester units of the product. Overall, this work demonstrates the benefit of combining organometallic and enzymatic catalysis to create unusual overall trans...

Reagent-free continuous thermal tert-butyl ester deprotection

Continuous processing enables the use of non-standard reaction conditions such as high temperatures and pressures while in the liquid phase. This expands the chemist’s toolbox and can enable previously unthinkable chemistry to proceed with ease. For a series of amphoteric amino acid derivatives, we have demonstrated the ability to hydrolyze the tert-butyl ester functionality in protic solvent systems. Using a continuous plug flow reactor at 120–240°C and 15–40min reaction times, no pH modification or additional reagents are needed to achieve the desired transformation. The method was then expanded to encompass a variety of more challenging substrates to test selectivity and racemization potential. The acid products were generally isolated as crystalline solids by simple solvent exchange after the deprotection reaction in good to high yield and purity.

Metabolism of KO143, an ABCG2 inhibitor

The ATP-binding cassette sub-family G member 2 (ABCG2) plays an important role in modulating drug disposition and endobiotic homeostasis. KO143 is a potent and relatively selective ABCG2 inhibitor. We found that the metabolic stability of KO143 was very poor in human liver microsomes (HLM). Our further studies illustrated that the tert-butyl ester group in KO143 can be rapidly hydrolyzed and removed by carboxylesterase 1. This metabolic pathway was confirmed as a major pathway of KO143 metabolism in both HLM and mice. K1 is an analog of KO143 without the ester group. We found that the metabolic stability of K1 was significantly improved in HLM when compared to KO143. These data suggest that the ester group in KO143 is the major cause of the poor metabolic stability of KO143. The data from this study can be used to guide the development of KO143 analogs with better metabolic properties.

Osthole prevents cerebral ischemia-reperfusion injury via the Notch signaling pathway.

Stroke is a common cerebrovascular disease in aging populations, and constitutes the second highest principle cause of mortality and the principle cause of permanent disability, and ischemic stroke is the primary form. Osthole is a coumarin derivative extracted from the fruits of Cnidium monnieri (L.) Cusson. In this study, we established a rat model of middle cerebral artery occlusion/reperfusion (MCAO/R) in vivo and found that MCAO/R caused cerebral infarction, hippocampus neuronal injury and apoptosis, and also activated the Notch 1 signaling pathway. However, treatment with osthole further enhanced the activity of Notch 1 signaling and reduced the cerebral infarction as well as the hippocampus neuronal injury and apoptosis induced by MCAO/R in a dose-dependent manner. The same results were observed in a primary neuronal oxygen glucose deficiency/reperfusion (OGD/R) model in vitro, and the effect of osthole could be blocked by an inhibitor of Notch 1 signaling, N-[N-(3,5-difluorophenacetyl)-l-alanyl]-S-phenylglycine tert-butyl ester (DAPT). Therefore, we demonstrated that osthole injection prevented rat ischemia-reperfusion injury via activating the Notch 1 signaling pathway in vivo and in vitro in a dose-dependent manner, which may be significant for clinical treatment of ischemic stroke.

The Conversion of tert-Butyl Esters to Acid Chlorides Using Thionyl Chloride.

The reaction of tert-butyl esters with SOCl2 at room temperature provides acid chlorides in unpurified yields of 89% or greater. Benzyl, methyl, ethyl, and isopropyl esters are essentially unreactive under these conditions, allowing for the selective conversion of tert-butyl esters to acid chlorides in the presence of other esters.