Environmental Variables Temperature Research Articles

The effect of thermal pre-incubation and exposure on sensitivity of zebrafish (Danio rerio) to copper and cadmium single and binary exposures

Zebrafish (Danio rerio) is a prominent model organism in a wide range of biological studies including toxicology. However, toxicological studies are often performed at species specific optimum temperature, and knowledge on the effect of different temperature regimes on the toxicity of metal ions is rather limited. To address this knowledge gap, present study investigates the effect of various thermal scenarios (simultaneous and sequential; acute and chronic) on the toxicity of Cu and Cd in zebrafish. For this purpose we assessed mortality and whole body metal burdens as indicators of toxicity and bioavailability, respectively, and whole body electrolyte concentrations and body condition as the indicators of physiological condition. Thermal pre-incubations (for 12 or 96 h or 28 days) and subsequent metal ion exposures (for 10 days) were conducted at 17, 22, 25, 28, 32 and 34 °C. The metal exposures were performed at Cu concentrations of 1.2 μM and Cd concentrations of 0.2 μM, both singly and in binary mixtures. Irrespective of thermal treatments, Cu exposures resulted in greater mortality than Cd exposures at the given concentrations. Moreover, the Cu and Cd mixture indicated a synergistic effect. While acute pre-incubation for 12 or 96 h at elevated temperatures increased mortality in the subsequent metal exposure at the optimum temperature (28 °C), pre-incubation at cold temperatures in this scenario appeared to increase tolerance towards the subsequent metal exposure. Chronic thermal pre-incubation of zebrafish to a range of temperatures for 28 days moderated the effect of temperature fluctuations on subsequent metal toxicity at the optimum temperature. Chronic thermal pre-incubation at a range of temperatures followed by metal exposure at the same temperature showed that environmental temperature variations (higher or lower than optimal temperature) coupled with metal exposure, led to increased mortality, furthermore, the highest whole body metal burdens were measured in this scenario. Nevertheless, neither the whole body burden of metals, nor the metal accumulation rate, were predictors of mortality, i.e. these two values were not higher in dead fish in comparison to those that survived the exposures. Finally, we observed a significant decrease in the whole body Na+ level of dead fish in comparison to fish which survived the exposure conditions, suggesting that survival depends on maintaining Na+ homeostasis under the applied multi-stress conditions. Overall, our results show that thermal pre-history and ambient temperature play an important role in determining the tolerance of zebrafish towards metal ion stress.

Environmental temperature variation affects brain protein expression and cognitive abilities in adult zebrafish (Danio rerio): A proteomic and behavioural study

Water temperature is an important environmental parameter influencing the distribution and the health of fishes and it plays a central role in ectothermic animals. The aim of this study is to determine the effects of environmental temperature on the brain proteome and the behavioural responses in zebrafish, a widely used animal model for environmental “omics” studies. Adult specimens of wild-type zebrafish were kept at 18 °C, 34 °C and 26 °C (control) for 21 days. Proteomic data revealed that several proteins involved in cytoskeletal organization, mitochondrial regulation and energy metabolism are differently regulated at the extreme temperatures. In particular, the expression of proteins associated to synapses and neurotransmitter release is down-regulated at 18 °C and 34 °C. In both thermal conditions, fish exhibited a reduced interest for the novel environment and an impairment of cognitive abilities during Y-Maze behavioural tests. The observed pathways of protein expression are possibly associated to functional alterations of the synaptic transmission that may result in cognitive functions impairment at central nervous system level as those revealed by behavioural tests. This study indicates that temperature variations can elicit biochemical changes that may affect fish health and behaviour. This combined approach provides insights into mechanisms supporting thermal acclimation and plasticity in fishes. SignificanceEnvironmental temperature variation may impact on all levels of biological life. Understanding the impact of thermal variation on the nervous system and animal behaviour is of primary importance since the results obtained can be applied from the ecological to the biomedical fields.

Feeling the heat: Extreme temperatures compromise constitutive innate humoral immunity and skin color in a desert dwelling lizard.

Environmental temperature, particularly in habitats with extreme temperature fluctuations, may shape selection pressures on life history traits. Especially in ectotherms, temperature affects performance, physiology, and in some species, skin color. Skin color can be a sexual ornament signaling the bearer's ability to resist infections, when only high-quality individuals are able to invest both in high immune defense and elaborate ornament expression. However, how the information content of these sexual traits may vary with environmental conditions has been less studied. Dickerson's collared lizard (Crotaphytus dickersonae) males are blue and have a black and white collar. This conspicuous coloration signals performance and immune response, and is related to body temperature. Here, by maintaining males at higher, lower, and mean environmental temperatures we evaluated whether temperature variation influences color and constitutive innate humoral immunity (agglutination and lysis titers, estimated through hemolysis-hemagglutination assays), and whether extreme temperatures impose trade-offs between color and humoral immunity. We found that at low and high temperature treatments males had lower agglutination and lysis titers, and at low temperature, blue chroma from the dorsum declined and males became greener. Interestingly, at low and control temperature treatments, agglutination titer and blue coloration were positively correlated, whereas high temperatures revealed a trade-off between increasing agglutination titers and displaying bluer skin color. Our results suggest that in the Dickerson collared lizard even short-term variation of environmental temperature affects performance of constitutive innate humoral immunity and the brilliant blue skin color. Particularly, high temperatures may compromise some components of male's immunity and sexual signaling.

Optical, mechanical and thermal characterizations of suspended chalcogenide glass microdisk membrane.

As a promising infrared optical material, the physical characteristics of patterned chalcogenide glass (ChG) membranes are of great importance for the improvement of device performances. In this work, based on the suspended membrane configuration, we have demonstrated the mechanical and thermal characterizations of the Ge11.5As24Se64.5 ChG optical microdisk resonator. By approximation of ChG cantilever configuration, the out-of-plane minimum mechanical strength of the microdisk membrane was measured to be 150 MPa by exploiting atom force microscope (AFM). This value is two orders of magnitude smaller than that of the bulk material, which is beneficial to achieve better mechanical compliance in terms of the ChG membrane sensors. To illustrate the effect of environmental temperature variation on the optical response of the ChG microdisk membrane with quality factor (Q-factor) of 2.87 × 104, the thermal drift was characterized to be 90.2 pm/°C by changing the substrate temperature from 30 °C to 44 °C. The characterization of multi-parameters in combination with the ChG free-standing microdisk prototype is conducive to further expand the potentials of ChG membrane in the ultrasound and other cavity optomechanical sensing.

An Optical MEMS Acoustic Sensor Based on Grating Interferometer.

Acoustic detection is of great significance because of its wide applications. This paper reports a Micro-Electro-Mechanical System (MEMS) acoustic sensor based on grating interferometer. In the MEMS structure, a diaphragm and a micro-grating made up the interference cavity. A short-cavity structure was designed and fabricated to reduce the impact of temperature on the cavity length in order to improve its stability against environment temperature variations. Besides this, through holes were designed in the substrate of the grating to reduce the air damping of the short-cavity structure. A silicon diaphragm with a 16.919 µm deep cavity and 2.4 µm period grating were fabricated by an improved MEMS process. The fabricated sensor chip was packaged on a conditioning circuit with a laser diode and a photodetector for acoustic detection. The output voltage signal in response to an acoustic wave is of high quality. The sensitivity of the acoustic sensor is up to −15.14 dB re 1 V/Pa @ 1 kHz. The output signal of the high-stability acoustic sensor almost unchanged as the environment temperature ranged from 5 °C to 55 °C.

Modelling the two-way coupling of tidal sand waves and benthic organisms: a linear stability approach

We use a linear stability approach to develop a process-based morphodynamic model including a two-way coupling between tidal sand wave dynamics and benthic organisms. With this model we are able to study both the effect of benthic organisms on the hydro- and sediment dynamics, and the effect of spatial and temporal environmental variations on the distribution of these organisms. Specifically, we include two coupling processes: the effect of the biomass of the organisms on the bottom slip parameter, and the effect of shear stress variations on the biological carrying capacity. We discuss the differences and similarities between the methodology used in this work and that from ‘traditional’ (morphodynamics only) stability modelling studies. Here, we end up with a 2times 2 linear eigenvalue problem, which leads to two distinct eigenmodes for each topographic wave number. These eigenmodes control the growth and migration properties of both sand waves and benthic organisms (biomass). Apart from hydrodynamic forcing, the biomass also grows autonomously, which results in a changing fastest growing mode (FGM, i.e. the preferred wavelength) over time. As a result, in contrast to ‘traditional’ stability modelling studies, the FGM for a certain model outcome does not necessarily have to be dominant in the field. Therefore, we also analysed the temporal evolution of an initial bed hump (without perturbing biomass) and of an initial biomass hump (without perturbing topography). It turns out that these local disturbances may trigger the combined growth of sand waves and spatially varying biomass patterns. Moreover, the results reveal that the autonomous benthic growth significantly influences the growth rate of sand waves. Finally, we show that biomass maxima tend to concentrate in the region around the trough and lee side slope of sand waves, which corresponds to observations in the field.

Bridge deck delamination segmentation based on aerial thermography through regularized grayscale morphological reconstruction and gradient statistics

Environmental and surface texture-induced temperature variation across the bridge deck is a major source of errors in delamination detection through thermography. This type of external noise poises a significant challenge for conventional quantitative methods such as global thresholding and k-means clustering. An iterative top-down approach is proposed for delamination segmentation based on grayscale morphological reconstruction. A weight-decay function was used to regularize the reconstruction for regional maxima extraction. The mean and coefficient of variation of temperature gradient estimated from delamination boundaries were used for discrimination. The proposed approach was tested on a lab experiment and an in-service bridge deck. The results demonstrated the improved capability of the framework to handle the non-uniform background, and thus eliminates the need of inferencing the background temperature which is often required by existing methods. That the results also suggested that the gradient statistics of the delamination boundary in the thermal image could be valid criterions to refine the segmentation under the proposed framework. Therefore, the authors concluded that the proposed method is a valid delamination segmentation approach for processing field concrete deck thermal images. The parameter selection and the limitation of this approach were also discussed. Further work will be carried out in more field cases to fine tune the parameter selection of the framework.

Environmental temperature alters the overall digestive energetics and differentially affects dietary protein and lipid use in a lizard.

Processing food (e.g. ingestion, digestion, assimilation) requires energy referred to as specific dynamic action (SDA) and is at least partially fuelled by oxidation of the nutrients (e.g. proteins and lipids) within the recently ingested meal. In ectotherms, environmental temperature can affect the magnitude and/or duration of the SDA, but is likely to also alter the mixture of nutrients that are oxidized to cover these costs. Here, we examined metabolic rate, gut passage time, assimilation efficiency and fuel use in the lizard Agama atra digesting cricket meals at three ecologically relevant temperatures (20, 25 and 32°C). Crickets were isotopically enriched with 13C-leucine or 13C-palmitic-acid tracers to distinguish between protein and lipid oxidation, respectively. Our results show that higher temperatures increased the magnitude of the SDA peak (by 318% between 32 and 20°C) and gut passage rate (63%), and decreased the duration of the SDA response (by 20% for males and 48% for females). Peak rate of dietary protein oxidation occurred sooner than peak lipid oxidation at all temperatures (70, 60 and 31 h earlier for 20, 25 and 32°C, respectively). Assimilation efficiency of proteins, but not lipids, was positively related to temperature. Interestingly, the SDA response exhibited a notable circadian rhythm. These results show that temperature has a pronounced effect on digestive energetics in A.atra, and that this effect differs between nutrient classes. Variation in environmental temperatures may thus alter the energy budget and nutrient reserves of these animals.

Factors Influencing Raynaud Condition Score Diary Outcomes in Systemic Sclerosis.

Raynaud phenomenon (RP) in systemic sclerosis (SSc) could be influenced by clinical phenotype, environmental factors (e.g., season), and personal factors (e.g., coping strategies and ill-health perceptions). We studied the relative influence of a range of putative factors affecting patient-reported assessment of SSc-RP severity. SSc patients were enrolled at UK and US sites. Participants completed the 2-week Raynaud Condition Score (RCS) diary alongside collection of patient demographics, clinical phenotype, the Coping Strategies Questionnaire, Pain Catastrophizing Scale, Scleroderma Health Assessment Questionnaire (SHAQ), and both patient/physician visual analog scale (VAS) assessments for RP, digital ulcer disease, and global disease. Environmental temperature data were obtained at each site. A second RCS diary was completed 6 months after enrollment. We enrolled 107 patients (baseline questionnaires returned by 94). There were significant associations between RCS diary variables and both catastrophizing and coping strategies. There were significant associations between RCS diary outcomes and both environmental temperature and season of enrollment. Age, disease duration, sex, disease subtype, smoking, and vasodilator use were not associated with RCS diary outcomes. The best-fitting multivariate model identified the patient RP VAS, SHAQ pain VAS, and SHAQ gastrointestinal VAS subscales as the strongest independent predictors of the RCS. Patient-reported assessment of SSc-RP severity is associated with a number of factors including pain, catastrophizing, and coping strategies. The effects of seasonal variation in environmental temperature on SSc-RP burden has implications for clinical trial design. Treatments targeting SSc-RP pain and the development of behavioral interventions enhancing coping strategies may reduce the burden of SSc-RP.

Self-Powered and Self-Functional Cotton Sock Using Piezoelectric and Triboelectric Hybrid Mechanism for Healthcare and Sports Monitoring.

Wearable devices rely on hybrid mechanisms that possess the advantages of establishing a smarter system for healthcare, sports monitoring, and smart home applications. Socks with sensing capabilities can reveal more direct sensory information on the body for longer duration in daily life. However, the limitation of suitable materials for smart textile makes the development of multifunctional socks a major challenge. In this paper, we have developed a self-powered and self-functional sock (S2-sock) to realize diversified functions including energy harvesting and sensing various physiological signals, i.e., gait, contact force, sweat level, etc., by hybrid integrating poly(3,4-ethylenedioxythiophene) polystyrenesulfonate (PEDOT:PSS)-coated fabric triboelectric nanogenerator (TENG) and lead zirconate titanate (PZT) piezoelectric chips. An output power of 1.71 mW is collected from a PEDOT:PSS-coated sock with mild jumping at 2 Hz and load resistance of 59.7 MΩ. The study shows that cotton socks worn daily can potentially be a power source for enabling self-sustained socks comprising wireless transmission modules and integrated circuits in the future. We also investigate the influences of environmental humidity, temperature, and weight variations and verify that our S2-sock can successfully achieve walking pattern recognition and motion tracking for smart home applications. On the basis of the sensor fusion concept, the outputs from TENG and PZT sensors under exercise activities are effectively merged together for quick detection of the sweat level. By leveraging the hybrid S2-sock, we can achieve more functionality in the applications of foot-based energy harvesting and monitoring the diversified physiological signals for healthcare, smart homes, etc.

Seasonal differences in baseline innate immune function are better explained by environment than annual cycle stage in a year-round breeding tropical songbird.

Seasonal variation in innate immunity is often attributed to either temporal environmental variation or to life‐history trade‐offs that arise from specific annual cycle stages but decoupling them is difficult in natural populations.Here, we effectively decouple seasonal environmental variation from annual cycle stage effects by exploiting cross‐seasonal breeding and moult in the tropical Common Bulbul Pycnonotus barbatus. We test how annual cycle stage interacts with a key seasonal environmental variable, rainfall, to determine immunity at population and individual level. If immune challenge varies with precipitation, we might expect immune function to be higher in the wet season due to increased environmental productivity. If breeding or moult imposes resource constraints on birds, depending on or independent of precipitation, we might expect lower immune indices during breeding or moult.We sampled blood from 818 birds in four annual cycle stage categories: breeding, moult, simultaneous breeding and moulting, or neither. We quantified indices of innate immunity (haptoglobin, nitric oxide (NO x) and ovotransferrin concentrations, and haemagglutination and haemolysis titres) over two annual cycles of wet and dry seasons.Environment (but not annual cycle stage or interactions between both) explained variation in all immune indices, except NO x. NO x concentration differed between annual cycle stages but not between seasons. However, within the wet season, haptoglobin, NO x, ovotransferrin and haemolysis differed significantly between breeding and non‐breeding females. Aside from some recorded inconsistencies, population level results were largely similar to results within individuals that were measured repeatedly. Unexpectedly, most immune indices were higher in the dry season and during breeding.Higher immune indices may be explained if fewer or poorer quality resources force birds to increase social contact, thereby exposing individuals to novel antigens and increased infection risk, independently of environmental productivity. Breeding birds may also show higher immunity if less immune‐competent and/or infected females omit breeding. We conclude that seasonal environmental variation impacts immunity more directly in natural animal populations than via resource trade‐offs. In addition, immune indices were more often variable within than among individuals, but some indices are characteristic of individuals, and so may offer selective advantages if heritable.

Conceptual design and thermodynamic optimization of a novel composition tunable zeotropic organic Rankine cycle

Organic Rankine cycle (ORC) is recently receiving increasing attention and regarded one of the most promising low-grade heat-to-power technology. Compared to the conventional high-grade fossil energy-to power technologies, ORC is much more sensible to the environmental temperature variation due to the low temperature of heat sources. A conventional ORC is typically designed under a given condition and mostly operate under off-design conditions, resulting in low annual average performance. This study proposes a novel zeotropic ORC in which the mixture composition can be tuned in response to the environmental temperature variation using liquid - separation condensation. A thermodynamic optimization model is formulated to optimized the mixture composition according to the environmental temperature. A concept design of liquid-separation condensation -based composition tuning system is conducted. The results show that the proposed ORC can significantly improve the overall efficiency without extra cost increment, which can be improved by up to 9.15 % compare to the conventional ORC for 100 oC heat source.

The ecology of sexual conflict: Temperature variation in the social environment can drastically modulate male harm to females

Abstract Sexual conflict is a fundamental driver of male/female adaptations, an engine of biodiversity and a crucial determinant of population viability. Sexual conflict frequently leads to behavioural adaptations that allow males to displace their rivals, but in doing so harm those same females they are competing to access, which can decrease population viability and facilitate extinction. We are far from understanding what factors modulate the intensity of sexual conflict and particularly the role of ecology in mediating underlying behavioural adaptations. In this study, we show that, in Drosophila melanogaster, variations in environmental temperature of ±4°C decrease male harm impact on female fitness by between 45% and 73%. Rate‐sensitive fitness estimates indicate that such modulation results in an average rescue of population productivity of 7% at colder temperatures and 23% at hotter temperatures. Our results: (a) show that the thermal ecology of social interactions can drastically modulate male harm via behavioural plasticity, (b) identify a potentially crucial ecological factor to understand how sexual conflict operates in nature and (c), along with recent studies, suggest that behaviourally plastic responses can lessen the negative effect of sexual conflict on population viability in the face of rapid environmental temperature changes. A plain language summary is available for this article.

Liquid Core Fiber Interferometer for Simultaneous Measurement of Refractive Index and Temperature

A simple fiber sensor for simultaneous measurement of refractive index (RI) and temperature is proposed and experimentally demonstrated. The sensor head consists of a section of liquid-filled hollow core fiber spliced between single mode fibers. An interference fringe is observed from the transmission spectrum of the sensor, which is originated from the modal interference within the liquid core fiber. A temperature sensitivity of −42.7 pm/°C is experimentally obtained between room temperature and 80 °C. The sensor also exhibits a wavelength shift response to the ambient liquid RI with a sensitivity of 141 nm/RIU. Due to different sensitivities of the dips at separate wavelengths, it is possible to monitoring environment temperature and RI variation simultaneously by tracing two transmission dips. The sensor structure is simple, easy to fabricate, and cost-effective, which has potential applications in biological and chemical sensing.

Non-reversible and Reversible Heat Tolerance Plasticity in Tropical Intertidal Animals: Responding to Habitat Temperature Heterogeneity.

The theory for thermal plasticity of tropical ectotherms has centered on terrestrial and open-water marine animals which experience reduced variation in diurnal and seasonal temperatures, conditions constraining plasticity selection. Tropical marine intertidal animals, however, experience complex habitat thermal heterogeneity, circumstances encouraging thermal plasticity selection. Using the tropical rocky-intertidal gastropod, Echinolittorina malaccana, we investigated heat tolerance plasticity in terms of laboratory acclimation and natural acclimatization of populations from thermally-dissimilar nearby shorelines. Laboratory treatments yielded similar capacities of snails from either population to acclimate their lethal thermal limit (LT50 variation was ∼2°C). However, the populations differed in the temperature range over which acclimatory adjustments could be made; LT50 plasticity occurred over a higher temperature range in the warm-shore snails compared to the cool-shore snails, giving an overall acclimation capacity for the populations combined of 2.9°C. In addition to confirming significant heat tolerance plasticity in tropical intertidal animals, these findings reveal two plasticity forms, reversible (laboratory acclimation) and non-reversible (population or shoreline specific) plasticity. The plasticity forms should account for different spatiotemporal scales of the environmental temperature variation; reversible plasticity for daily and tidal variations in microhabitat temperature and non-reversible plasticity for lifelong, shoreline temperature conditions. Non-reversible heat tolerance plasticity, likely established after larvae settle on the shore, should be energetically beneficial in preventing heat shock protein overexpression, but also should facilitate widespread colonization of coasts that support thermally-diverse shorelines. This first demonstration of different plasticity forms in benthic intertidal animals supports the hypothesis that habitat heterogeneity (irrespective of latitude) drives thermal plasticity selection. It further suggests that studies not making reference to different spatial scales of thermal heterogeneity, nor seeking how these may drive different thermal plasticity forms, risk misinterpreting ectothermic responses to environmental warming.

Behavior of an asphalt mixture MDC-19 under the cycles of ambient temperature in the city of Tunja, Colombia

The weather factor plays an important role in the behavior and performance of asphalt mixtures as a surface layer in a flexible pavement structure, not just from the moisture, but also from the environmental temperature. Asphalt layers of the flexible pavements in Tunja city exposes daily to environmental temperature variations, which usually occur when the highest temperatures are reached during the daytime, and the lowest temperatures appear at night and early morning time. Firstly, this research is based , on the definition of the environmental temperature cycles that occur daily in Tunja City, from the analysis of the temperature series. Subsequently, the analysis was done through laboratory tests on an asphalt mix MDC-19 INVIAS type, made and compacted in the laboratory, to determine the influence of the cycles of environmental temperature on its density, stability and flow properties, during 120 daily and continuous temperature cycles, which consist of 12 hours of maximum temperature and 12 hours of minimum temperature to simulate the environmental conditions. As a result of this investigation, the presentation density is presented, presenting a tendency to increase the measurement that increases the temperature cycles and then a decrease in the briquettes of the mixture that have sometimes been until the last cycles. Variations in the resistance to deformation of the analysis mixture were obtained as the ambient temperature cycles were sometimes made, which concludes that the ambient temperature cycles have an influence on the behavior of the asphalt mixture.

The crocodylian skull and osteoderms: A functional exaptation to ectothermy?

The crocodylians are ectothermic semi-aquatic vertebrates which are assessed to have evolved from endothermic terrestrial forms during the Mesozoic. Such a physiological transition should have involved modifications in their cardio-vascular system allowing to increase the heat transfers with the surrounding environment by growing a peripheral vascularization which would be mainly located in the dermal skeleton: the dermatocranium and the osteoderms. In order to assess the implication of these anatomical regions in thermal exchanges, we have recorded the temperature above a set of representative skin areas in order to draw comparisons between the skull, the osteoderms, and the rest of the body parts which present either none or residual dermal ossification. We computed the data after the specimens were successively laid in different stereotyped environmental conditions which involved significant variations in the environmental temperature. Our results show that the osteoderms collect the external heat during the basking periods as they become significantly warmer than the surrounding skin; they further release the heat into the core of the organism as they turn out to be colder than the surrounding skin after a significant cooling period. In disregard of the environmental temperature variations, the skull table (which encloses the braincase) remains warmer than the rest of the cranial regions and shows less temperature variations than the osteoderms; a result which has lead us to think that the braincase temperature is monitored and controlled by a thermoregulatory system. Therefore, as hypothesized by previous authors regarding the ectothermic diapsids, we assume that the crocodylian skull possesses shunting blood pathways which tend to maintain both the braincase and the main sensory organs at the nearest to the optimal physiological temperature depending on the external temperature variations. Concerning the skin vascularization, the study of an albino Alligator mississippiensis specimen permitted to observe the repartition of the superficial blood vessels by transparency through the skin. We thus testify that the skin which covers either the skull or the osteoderms is more vascularized than the skin which does not present any subjacent dermal ossification. We consequently deduce that the significant contrast in the thermal behavior between the dermal skeleton and the rest of the body is indeed correlated with a difference in the relative degree of skin vascularization. This last assessment confirms that the development of the dermal skeleton should have played a functional role in the crocodylian transition from endothermy to ectothermy through the set-up of a peripheral vessel network.

Influences of environmental variation on anadromous Arctic charr from the Hornaday River, NWT

Insights from long-term subsistence fisheries data can improve our understanding of the population-specific responses of Arctic charr, Salvelinus alpinus, to environmental conditions. In this study, associations were found between temporal environmental variation and Arctic charr length- and weight-based growth using data from fish captured in the Hornaday River fishery. Overall, spring precipitation and summer air temperature appear to be the most important environmental influences on Arctic charr probably because of their respective impacts on the opportunities for acquiring surplus energy for growth. A pattern of decreasing age-related importance of temperature and increasing age-related importance of precipitation suggested that the coupling between growth and environmental effects varied by life-period. The changing prominence of each variable seems to result from the shift in apportioning energy for increases in length to increases in weight, likely as a result of the onset of maturation. The linkage of population characteristics to environmental conditions provides a baseline reference against which future data may be compared to determine the significance of any observed changes in population characteristics as a result of continuing ecological change in the north.

Strain transfer analysis of fiber Bragg grating sensor assembled composite structures subjected to thermal loading

Optical fiber sensing technology has been widely used for thermal strain detection of civil structures subjected to the environmental temperature variations. Due to the fragile material nature, bare optical fibers are seldom used in practice, as they cannot resist the harsh service environment. A packaging measure is usually required to enhance the durability of optical fiber-based sensors for reliable long-term detection. However, the existence of packaging and bonding materials brings about strain transfer loss, which makes the optical fiber readings not accurately represent the actual strains of the host material. This paper presents a combined experimental and theoretical study on a four-layer optical fiber sensing composites (i.e., the host material, an adhesive bonding layer, the sensing fiber, and its protection layer) subjected to thermal loading to correct the above-mentioned strain transfer error. Aluminum and polypropylene (PP) plates with different thermal expansion coefficients were surface-bonded with fiber Bragg grating (FBG) sensors and then exposed to various temperatures (30–70 °C). Theoretical study was developed to investigate how the strain measurement error was influenced by the thermal deformation incompatibility of multiple contacted layers (i.e., the optical fiber, the protective layer, the adhesive layer and the hosting material) with different thermal expansion coefficients. The accuracy and effectiveness of the proposed strain transfer function was then validated through comparisons with the test results. Based on the theoretical analysis, the sensitivity of the relevant material and geometrical parameters on the strain transfer efficiency was discussed to instruct the design of FBG based sensors. The proposed error-modification formula can be used to effectively improve the strain measurement accuracy and instruct the optimum design of FBG based sensors applied to civil structures under thermal loading.

Experiment-based thermal behavior research about the feed drive system with linear scale

Positioning error of the feed drive system has great influence of the machining quality. In order to guarantee the positioning accuracy, the linear grating scale is adopted to form a full-closed loop. However, due to the inner heat sources and environmental temperature variations, the linear grating scale could expand and the thermally induced positional deviation is generated. In this article, temperatures and positional deviations of the ball screw feed drive system and the linear motor feed drive system equipped with linear scales were tested. The factors that affect the positioning error were analyzed. Then, the temperatures and positioning coordinates were used as inputs to build the thermally induced positional deviation model of full closed-loop feed drive system. Based on the model, coordinate values of the machine tool were adjusted and the compensation was implemented. The testing results verified that after compensation, the positional deviations were greatly reduced.