Tissue Engineering Technology Research Articles

Injectable dual drug-loaded thermosensitive liposome-hydrogel composite scaffold for vascularised and innervated bone regeneration

Adequate blood supply and thorough innervation are essential to the survival of tissue-engineered bones. Though great progress has been created in the application of bone tissue engineering technology to bone defect repair, many challenges remain, such as insufficient vascularisation and deficient innervation in newly regenerated bone. In the present study, we addressed these challenges by manipulating the bone regeneration microenvironment in terms of vascularisation and innervation. We used a novel injectable thermosensitive liposome-hydrogel composite scaffold as a sustained-release carrier for basic fibroblast growth factor (bFGF, which promotes angiogenesis and neurogenic differentiation) and dexamethasone (Dex, which promotes osteogenic differentiation). In vitro biological assessment demonstrated that the composite scaffold had sufficient cell compatibility; it enhanced the capacity for angiogenesis in human umbilical vein endothelial cells, and the capacity for neurogenic/osteogenic differentiation in human bone marrow mesenchymal stem cells. Moreover, the introduction of bFGF/Dex liposome-hydrogel composite scaffold to bone defect sites significantly improved vascularisation and innervated bone regeneration properties in a rabbit cranial defect model. Based on our findings, the regeneration of sufficiently vascularised and innervated bone tissue through a sustained-release scaffold with excellent injectability and body temperature sensitivity represents a promising tactic towards bone defect repair.

Interleukin-4-Loaded Gelatin Methacryloyl Hydrogel Promotes Subcutaneous Chondrogenesis of Engineered Auricular Cartilage in a Rabbit Model.

Tissue engineering technology offers a promising solution for ear reconstruction; however, it faces the challenge of foreign body reaction and neocartilage malformation. This study investigates the impact of interleukin-4 (IL-4), an anti-inflammatory factor, on cartilage regeneration of hydrogel encapsulating autologous auricular chondrocytes in a rabbit subcutaneous environment. Initially, we assessed the influence of IL-4 on chondrocyte proliferation and determined the appropriate concentration using the CCK-8 test in vitro. Subsequently, we loaded IL-4 into gelatin methacryloyl (GelMA) hydrogel containing chondrocytes and measured its release profile through ELISA. The constructs were then implanted autologously into rabbits' subcutis, and after 3, 7, 14, and 28 days, cartilage matrix formation was evaluated by histological examinations, and gene expression levels were detected by qRT-PCR. Results demonstrated that IL-4 promotes chondrocyte proliferation in vitro, and maximum release from constructs occurred during the first week. In the rabbit subcutaneous implantation model, IL-4-loaded constructs (20 ng/mL) maintained a superior chondrocytic phenotype compared to controls with increased expression of anti-inflammatory factors. These findings highlight IL-4 as a potential strategy for promoting chondrogenesis in a subcutaneous environment and improving ear reconstruction.

Efficient fabrication of 3D bioprinted functional sensory neurons using an inducible Neurogenin-2 human pluripotent stem cell line

Three-dimensional (3D) tissue models have gained recognition for their improved ability to mimic the native cell microenvironment compared to traditional two-dimensional models. This progress has been driven by advances in tissue-engineering technologies such as 3D bioprinting, a promising method for fabricating biomimetic living tissues. While bioprinting has succeeded in generating various tissues to date, creating neural tissue models remains challenging. In this context, we present an accelerated approach to fabricate 3D sensory neuron (SN) structures using a transgenic human pluripotent stem cell (hPSC)-line that contains an inducible Neurogenin-2 (NGN2) expression cassette. The NGN2 hPSC line was first differentiated to neural crest cell (NCC) progenitors, then incorporated into a cytocompatible gelatin methacryloyl-based bioink for 3D bioprinting. Upregulated NGN2 expression in the bioprinted NCCs resulted in induced SN (iSN) populations that exhibited specific cell markers, with 3D analysis revealing widespread neurite outgrowth through the scaffold volume. Calcium imaging demonstrated functional activity of iSNs, including membrane excitability properties and voltage-gated sodium channel (NaV) activity. This efficient approach to generate 3D bioprinted iSN structures streamlines the development of neural tissue models, useful for the study of neurodevelopment and disease states and offering translational potential.

Bi-layered Adipose Mesenchymal Cell Sheets Improve Bladder Compliance in Spinal Cord-Injured Rats.

To improve bladder compliance in patients with low-compliance bladders, augmentation cystoplasty with the intestinal tract is performed. However, the use of the intestinal tract often leads to serious surgical complications. Tissue engineering technologies have the potential to improve bladder compliance without using the intestinal tract. In this study, we fabricated bi-layered adipose-derived mesenchymal cell (AMC) sheets and then determined whether the bi-layered AMC sheets could improve bladder compliance in rats with spinal cord injury (SCI). The abdominal adipose tissues of green fluorescence protein (GFP)-transfected Sprague-Dawley (SD) rats were harvested, and the attached and proliferating cells on type I collagen were used as AMCs. The AMCs were then cultured on temperature-responsive culture dishes. After reaching over-confluence, the AMCs that maintained cell-cell contacts were detached from the dishes and applied to a gelatin hydrogel sheet. Then, another detached AMC monolayer was accumulated on the AMC monolayer-applied gelatin. Prior to 4 weeks of transplantation, the levels of T8-9 in the spinal cords of recipient SD rats were partially transected. After producing the bi-layered AMC sheets and the rats with SCI, the detrusor muscles of the anterior bladder walls of the rats with SCI were incised, and the bi-layered AMC sheet was patch-transplanted onto the exposed bladder epithelium (n = 8). As a control, the sham operation was performed (n = 7). Four weeks after the transplantation, bladder capacity and bladder compliance in AMC sheet-transplanted SCI rats were significantly higher than those in sham-operated control SCI rats. The smooth muscle layers in AMC sheet-transplanted bladders were significantly larger than those in control bladders. In addition, the collagen fibers in the AMC sheet-transplanted bladders were significantly smaller than those in the control bladders. Some GFP-positive transplanted AMCs differentiated into smooth muscle actin- or desmin-positive cells. Furthermore, GFP-positive cells secreted transforming growth factor-β1 or vascular endothelial growth factor. Therefore, this study showed that bi-layered AMC sheets could improve bladder compliance and bladder tissues in SCI rats.

3D printing of hydrogel composite systems: Recent advances in technology for tissue engineering.

Three-dimensional (3D) printing of hydrogels is now an attractive area of research due to its capability to fabricate intricate, complex and highly customizable scaffold structures that can support cell adhesion and promote cell infiltration for tissue engineering. However, pure hydrogels alone lack the necessary mechanical stability and are too easily degraded to be used as printing ink. To overcome this problem, significant progress has been made in the 3D printing of hydrogel composites with improved mechanical performance and biofunctionality. Herein, we provide a brief overview of existing hydrogel composite 3D printing techniques including laser based-3D printing, nozzle based-3D printing, and inkjet printer based-3D printing systems. Based on the type of additives, we will discuss four main hydrogel composite systems in this review: polymer- or hydrogel-hydrogel composites, particle-reinforced hydrogel composites, fiber-reinforced hydrogel composites, and anisotropic filler-reinforced hydrogel composites. Additionally, several emerging potential applications of hydrogel composites in the field of tissue engineering and their accompanying challenges are discussed in parallel.

Strategies To Enhance Biocompatibility of Bone Scaffold for Tissue Engineering Applications

Tissue engineering (TE) is a modern approach to improve or restore tissues that has been diseased or damaged by combining the factors in growth signaling and appropriate cells to form compatible biomaterial scaffold. Bone repair has been a major global health challenge in recent decades. Bone transplantation is widely used as an effective clinical treatment for this purpose. However, there are several serious issues with transplantation, including a shortage of autologous bone, immune rejection, the risk of virus transmission with allogeneic bone, and postoperative complications. In recent years, scaffolds for bone tissue engineering have emerged as a promising alternative for bone repair. These scaffolds have porous structures that mimic the extracellular matrix, which can enhance the migration, proliferation, and differentiation of osteoblasts. This process accelerates the repair of bone defects.The usage of bioactive materials has become important tool in tissue engineering and regenerative medicine application as they are to mimic tissues mechanically, chemically, and physically. Polymeric scaffold provides numerous advantageous for tissue engineering since the physicochemical properties such as porosity, pore size, solubility and biocompatibility can be controlled. Therefore, research works were carried out to explore the potential of various materials in producing bone scaffolds in tissue engineering technology. As for both newcomers and experts, this review paper will help them to find information on various types of biomaterials in imparting or enhancing their biological properties such as biocompatibility, bacterial inhibition, tissue regeneration and cell growth, bio inertness, bioactive and resorbability for bone scaffold tissue engineering application.

3D Porous Polymer Scaffold-Conjugated KGF-Mimetic Peptide Promotes Functional Skin Regeneration in Chronic Diabetic Wounds.

The re-epithelialization process gets severely dysregulated in chronic nonhealing diabetic foot ulcers/wounds. Keratinocyte growth factor (KGF or FGF-7) is the major modulator of the re-epithelialization process, which regulates the physiological phenotypes of cutaneous keratinocytes. The existing therapeutic strategies of growth factor administration have several limitations. To overcome these, we have designed a KGF-mimetic peptide (KGFp, 13mer) based on the receptor interaction sites in murine KGF. KGFp enhanced migration and transdifferentiation of mouse bone marrow-derived MSCs toward keratinocyte-like cells (KLCs). A significant increase in the expression of skin-specific markers Bnc1 (28.5-fold), Ck5 (14.6-fold), Ck14 (26.1-fold), Ck10 (187.7-fold), and epithelial markers EpCam (23.3-fold) and Cdh1 (64.2-fold) was associated with the activation of ERK1/2 and STAT3 molecular signaling in the KLCs. Further, to enhance the stability of KGFp in the wound microenvironment, it was conjugated to biocompatible 3D porous polymer scaffolds without compromising its active binding sites followed by chemical characterization using Fourier transform infrared spectroscopy, field-emission scanning electron microscopy, dynamic mechanical analysis, and thermogravimetry. In vitro evaluation of the KGFp-conjugated 3D polymer scaffolds revealed its potential for transdifferentiation of MSCs into KLCs. Transplantation of allogeneic MSCGFP using KGFp-conjugated 3D polymer scaffolds in chronic nonhealing type 2 diabetic wounds (db/db transgenic, 50-52 weeks old male mice) significantly enhanced re-epithelialization-mediated wound closure rate (79.3%) as compared to the control groups (Untransplanted -22.4%, MSCGFP-3D polymer scaffold -38.5%). Thus, KGFp-conjugated 3D porous polymer scaffolds drive the fate of the MSCs toward keratinocytes that may serve as potential stem cell delivery platform technology for tissue engineering and transplantation.

Construction, Features and Regulatory Aspects of Organ-chip for DrugDelivery Applications: Advances and Prospective

: Organ-on-chip is an innovative technique that emerged from tissue engineering and microfluidic technologies. Organ-on-chip devices (OoCs) are anticipated to provide efficient explanations for dealing with challenges in pharmaceutical advancement and individualized illness therapies. Organ-on-chip is an advanced method that can replicate human organs' physiological conditions and functions on a small chip. It possesses the capacity to greatly transform the drug development process by enabling the simulation of diseases and the testing of drugs. Effective integration of this advanced technical platform with common pharmaceutical and medical contexts is still a challenge. Microfluidic technology, a micro-level technique, has become a potent tool for biomedical engineering research. As a result, it has revolutionized disciplines, including physiological material interpreting, compound detection, cell-based assay, tissue engineering, biological diagnostics, and pharmaceutical identification. This article aims to offer an overview of newly developed organ-on-a-chip systems. It includes single-organ platforms, emphasizing the most researched organs, including the heart, liver, blood arteries, and lungs. Subsequently, it provides a concise overview of tumor-on-a-chip systems and emphasizes their use in evaluating anti-cancer medications.

From Promise to Practice: Recent Growth in 30 Years of Tissue Engineering Commercialization.

This perspective, marking the 30th anniversary of the Tissue Engineering journal, discusses the exciting trends in the global commercialization of tissue engineering technology. Within a historical context, we present an evolution of challenges and a discussion of the last 5 years of global commercial successes and emerging market trends, highlighting the continued expansion of the field in the northeastern United States. This leads to an overview of the last 5 years' progress in clinical trials for tissue engineered therapeutics, including an analysis of trends in success and failure. Finally, we provide a broad overview of preclinical research and a perspective on where the state-of-the-art lies on the horizon.

Investigating mechanical properties of 3D printed porous titanium scaffolds for bone tissue engineering

Objective. Three-dimensional (3D) printed porous titanium scaffolds serve as a bone tissue engineering technology that offers a promising solution for addressing bone defects. The scaffold’s pore structure offers structural support and facilitates the proliferation of bone cells. Therefore, investigating the aperture and pore shape is of crucial for the development of 3D printed porous titanium scaffolds. Methods. Ti6Al4V scaffolds with the specified structure were fabricated using selective laser melting (SLM) technology. The scaffolds comprised fifteen cylindrical models measuring 20 mm in diameter and 20 mm in height. These models featured five scaffold shapes: imitation diamond-60°, imitation diamond-90°, imitation diamond-120°, regular tetrahedron and regular hexahedron. Each of these structural shapes was characterized by three different aperture sizes (400 μm, 600 μm and 800 μm). The porosity and mechanical properties of Ti6Al4V scaffolds were examined. Results. The measured porosity of Ti6Al4V scaffolds varied between 56.50% and 95.28%. The porosity increased with the size of the aperture. The mechanical properties tests revealed that, for identical apertures, the compressive strength and torsional strength were influenced by the configuration of the unit structure. Furthermore, the positive and lateral compressive strength as well as torsional strength of various unit structures exhibited distinct advantages and disadvantages. Within a uniform unit structure shape, the compressive strength and torsional strength were found to be correlated with the size of apertures, indicating that larger apertures result in decreased compressive and torsional strength. Conclusion. The configuration of the aperture and the shape of the pore were identified as significant factors that influenced the compressive strength. The compressive strength of Ti6Al4V scaffolds with various unit structure shapes exhibited both advantages and disadvantages when subjected to positive, lateral, and torsional forces. The enlarged aperture augmented the scaffold’s porosity while diminishing its compressive and torsional strength.

Revisiting Recent Tissue Engineering Technologies in Alveolar Cleft Reconstruction.

Tissue engineering and regenerative medicine have received significant attention in treating degenerative disorders and presented unique opportunities for researchers. The latest research on tissue engineering and regenerative medicine to reconstruct the alveolar cleft has been reviewed in this study. Three approaches have been used to reconstruct alveolar cleft: Studies that used only stem cells or biomaterials and studies that reconstructed alveolar defects by tissue engineering using a combination of stem cells and biomaterials. Stem cells, biomaterials, and tissue-engineered constructs have shown promising results in the reconstruction of alveolar defects. However, some contrary issues, including stem cell durability and scaffold stability, were also observed. It seems that more prospective and comprehensive studies should be conducted to fully clarify the exact dimensions of the stem cells and tissue engineering reconstruction method in the therapy of alveolar cleft.

Preliminary study on the preparation of antler powder/chitosan/β-glycerophosphate sodium/polyvinyl alcohol porous hydrogel scaffolds and their osteogenic effects.

Introduction: The production of bone-like structural scaffolds through bone tissue engineering technology is a promising method for bone regeneration to repair bone defects. Deer antler, an easily harvested and abundantly sourced initial bone tissue structure, resembles the composition and structure of human cancellous bone and can serve as a new material for allogeneic bone transplantation. Methods: This study involved the preparation and characterization of antler powder/chitosan/β-glycerophosphate sodium/polyvinyl alcohol (AP/CS/β-GP/PVA) porous hydrogel scaffolds to verify their material properties and osteogenic mechanisms. The microstructure, hydrophilicity, and mechanical properties of the scaffolds were studied using Scanning Electron Microscopy (SEM), contact angle measurement, and a universal material testing machine. The interactions between the various components were investigated using Fourier-Transform Infrared Spectroscopy (FTIR). Biocompatibility, osteogenic properties, and expression of osteogenesis-related proteins of the scaffolds were evaluated through Cell Counting Kit-8 (CCK-8) assays, alkaline phosphatase staining, Alizarin Red staining, live/dead cell staining, and Western blot analysis. Results: The results showed that as the content of deer antler powder increased, both the hydrophilicity and mechanical properties of the scaffold materials improved, while the porosity slightly decreased with an increase in deer antler powder content. Cell culture experiments demonstrated that scaffolds with a higher proportion of deer antler powder were beneficial for the proliferation and differentiation of mouse pre-osteoblast (MC3T3-E1) cells, with the scaffolds containing 10% and 8% deer antler powder showing the best effects. The upregulation of RUNX2, OCN, OSX, and OPN protein expression may promote differentiation. Discussion: Therefore, the AP/CS/β-GP/PVA hydrogel scaffolds have the potential to become a promising biomaterial for bone tissue engineering.

Nanomaterials-Based Hybrid Bioink Platforms in Advancing 3D Bioprinting Technologies for Regenerative Medicine.

3D bioprinting is recognized as the ultimate additive biomanufacturing technology in tissue engineering and regeneration, augmented with intelligent bioinks and bioprinters to construct tissues or organs, thereby eliminating the stipulation for artificial organs. For 3D bioprinting of soft tissues, such as kidneys, hearts, and other human body parts, formulations of bioink with enhanced bioinspired rheological and mechanical properties were essential. Nanomaterials-based hybrid bioinks have the potential to overcome the above-mentioned problem and require much attention among researchers. Natural and synthetic nanomaterials such as carbon nanotubes, graphene oxides, titanium oxides, nanosilicates, nanoclay, nanocellulose, etc. and their blended have been used in various 3D bioprinters as bioinks and benefitted enhanced bioprintability, biocompatibility, and biodegradability. A limited number of articles were published, and the above-mentioned requirement pushed us to write this review. We reviewed, explored, and discussed the nanomaterials and nanocomposite-based hybrid bioinks for the 3D bioprinting technology, 3D bioprinters properties, natural, synthetic, and nanomaterial-based hybrid bioinks, including applications with challenges, limitations, ethical considerations, potential solution for future perspective, and technological advancement of efficient and cost-effective 3D bioprinting methods in tissue regeneration and healthcare.

Articular Cartilage Injury; Current Status and Future Direction.

Today, treatments of cartilage and osteochondral lesions are routine clinical procedures. The avascular and hard-to-self-repair nature of cartilage tissue has posed a clinical challenge for the replacement and reconstruction of damaged cartilage. Treatment of large articular cartilage defects is technically difficult and complex, often accompanied by failure. Articular cartilage cannot repair itself after injury due to a lack of blood vessels, lymph, and nerves. Various treatments for cartilage regeneration have shown encouraging results, but unfortunately, none have been the perfect solution. New minimally invasive and effective techniques are being developed. The development of tissue engineering technology has created hope for articular cartilage reconstruction. This technology mainly supplies stem cells with various sources of pluripotent and mesenchymal stem cells. This article describes the treatments in detail, including types, grades of cartilage lesions, and immune mechanisms in cartilage injuries.

Biomaterials-Based Technologies in Skeletal Muscle Tissue Engineering.

For many clinically prevalent severe injuries, the inherent regenerative capacity of skeletal muscle remains inadequate. Skeletal muscle tissue engineering (SMTE) seeks to meet this clinical demand. With continuous progress in biomedicine and related technologies including micro/nanotechnology and 3D printing, numerous studies have uncovered various intrinsic mechanisms regulating skeletal muscle regeneration and developed tailored biomaterial systems based on these understandings. Here, the skeletal muscle structure and regeneration process are discussed and the diverse biomaterial systems derived from various technologies are explored in detail. Biomaterials serve not merely as local niches for cell growth, but also as scaffolds endowed with structural or physicochemical properties that provide tissue regenerative cues such as topographical, electrical, and mechanical signals. They can also act as delivery systems for stem cells and bioactive molecules that have been shown as key participants in endogenous repair cascades. To achieve bench-to-bedside translation, the typical effect enabled by biomaterial systems and the potential underlying molecular mechanisms are also summarized. Insights into the roles of biomaterials in SMTE from cellular and molecular perspectives are provided. Finally, perspectives on the advancement of SMTE are provided, for which gene therapy, exosomes, and hybrid biomaterials may hold promise to make important contributions.

Cellularized Biomaterials Used as Gingival Connective Tissue Substitutes In Vivo: A Systematic Review.

Developing an in vitro model of gingival connective tissue that mimics the original structure and composition of gingiva for clinical grafting is relevant for personalized treatment of missing gingiva. Using tissue engineering techniques allows bypassing limitations encountered with existing solutions to increase oral soft tissue volume. This review aims to systematically analyze the different currently existing cellularized materials and technologies used to engineer gingival substitutes for invivo applications. The Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines were followed. An electronic search on PubMed, Scopus, Web of Science, and Cochrane Library databases was conducted to identify suitable studies. In vivo studies about gingival substitutes and grafts containing oral cells compared with a control to investigate the graft remodeling were included. Risk of bias in the included studies was assessed using the Systematic Review Center for Laboratory animal Experimentation (SYRCLE) 10-item checklist. Out of 631 screened studies, 19 were included. Animal models were mostly rodents, and the most used implantation was subcutaneous. According to the SYRCLE tool, low-to-unclear risk of bias was prevalent. Studies checked vascularization and extracellular remodeling up to 60 days after implantation of the cellularized biomaterial. Cells used were mostly fibroblasts and stem cells from oral origin. Grafts presenting vascularization potential after implantation were produced by tissue engineering technologies including cell seeding or embedding for 14, cell sheets for 2, microsphere for 1, and extrusion 3D bioprinting for 2. Components used to build the scaffold containing the cells are all naturally derived and are mainly fibrin, gelatin, collagen, agarose, alginate, fibroin, guar gum, hyaluronic acid, and decellularized extracellular matrix. The most recurring crosslinking method was using chemicals. All studies except one reported vascularization of the graft after implantation, and some detailed extracellular matrix remodeling. Current solutions are not efficient enough. By assessing the relevant studies on the subject, this systematic review showed that a diversity of cellularized biomaterials substituting gingival connective tissue enables vascularization and extracellular remodeling. Taking the results of this review into account could help improve current bio-inks used in 3D bioprinting for invivo applications compensating for gingival loss.

Active Media Perfusion in Bioprinted Highly Concentrated Collagen Bioink Enhances the Viability of Cell Culture and Substrate Remodeling.

The bioprinting of high-concentrated collagen bioinks is a promising technology for tissue engineering and regenerative medicine. Collagen is a widely used biomaterial for bioprinting because of its natural abundance in the extracellular matrix of many tissues and its biocompatibility. High-concentrated collagen hydrogels have shown great potential in tissue engineering due to their favorable mechanical and structural properties. However, achieving high cell proliferation rates within these hydrogels remains a challenge. In static cultivation, the volume of the culture medium is changed once every few days. Thus, perfect perfusion is not achieved due to the relative increase in metabolic concentration and no medium flow. Therefore, in our work, we developed a culture system in which printed collagen bioinks (collagen concentration in hydrogels of 20 and 30 mg/mL with a final concentration of 10 and 15 mg/mL in bioink) where samples flow freely in the culture medium, thus enhancing the elimination of nutrients and metabolites of cells. Cell viability, morphology, and metabolic activity (MTT tests) were analyzed on collagen hydrogels with a collagen concentration of 20 and 30 mg/mL in static culture groups without medium exchange and with active medium perfusion; the influence of pure growth culture medium and smooth muscle cells differentiation medium was next investigated. Collagen isolated from porcine skins was used; every batch was titrated to optimize the pH of the resulting collagen to minimize the difference in production batches and, therefore, the results. Active medium perfusion significantly improved cell viability and activity in the high-concentrated gel, which, to date, is the most limiting factor for using these hydrogels. In addition, based on SEM images and geometry analysis, the cells remodel collagen material to their extracellular matrix.

Biomaterials and emerging technologies for tissue engineering and in vitro models

Biomaterials and emerging technologies for tissue engineering and in vitro models

High-precision 3D printing of multi-branch vascular scaffold with plasticized PLCL thermoplastic elastomer

Three-dimensional (3D) printing has emerged as a transformative technology for tissue engineering, enabling the production of structures that closely emulate the intricate architecture and mechanical properties of native biological tissues. However, the fabrication of complex microstructures with high accuracy using biocompatible, degradable thermoplastic elastomers poses significant technical obstacles. This is primarily due to the inherent soft-matter nature of such materials, which complicates real-time control of micro-squeezing, resulting in low fidelity or even failure. In this study, we employ Poly (L-lactide-co-ϵ-caprolactone) (PLCL) as a model material and introduce a novel framework for high-precision 3D printing based on the material plasticization process. This approach significantly enhances the dynamic responsiveness of the start-stop transition during printing, thereby reducing harmful errors by up to 93%. Leveraging this enhanced material, we have efficiently fabricated arrays of multi-branched vascular scaffolds that exhibit exceptional morphological fidelity and possess elastic moduli that faithfully approximate the physiological modulus spectrum of native blood vessels, ranging from 2.5 to 45 MPa. The methodology we propose for the compatibilization and modification of elastomeric materials addresses the challenge of real-time precision control, representing a significant advancement in the domain of melt polymer 3D printing. This innovation holds considerable promise for the creation of detailed multi-branch vascular scaffolds and other sophisticated organotypic structures critical to advancing tissue engineering and regenerative medicine.

Application and Research Progress of Lung Cancer Organoid in Precision Medicine for Lung Cancer

The continuous advancement of molecular detection technology has greatly propelled the development of precision medicine for lung cancer. However, tumor heterogeneity is closely associated with tumor metastasis, recurrence, and drug resistance. Additionally, different lung cancer patients with the same genetic mutation may exhibit varying treatment responses to different therapeutic strategies. Therefore, the development of modern precision medicine urgently requires the precise formulation of personalized treatment strategies through personalized tumor models. Lung cancer organoid (LCO) can highly simulate the biological characteristics of tumor in vivo, facilitating the application of innovative drugs such as antibody-drug conjugate in precision medicine for lung cancer. With the development of co-culture model of LCO with tumor microenvironment and tissue engineering technology such as microfluidic chip, LCO can better preserve the biological characteristics and functions of tumor tissue, further improving high-throughput and automated drug sensitivity experiment. In this review, we combine the latest research progress to summarize the application progress and challenges of LCO in precision medicine for lung cancer. .