Wastewater Treatment Technologies Research Articles

Temperature-Sensitive Template for Preparation of ZnO/CeO2 Composite Photocatalytic Materials and Its Catalytic Performance.

In this work, a series of thermosensitive ionic liquid functionalized polymers, PNx(IL)y, with controllable morphology and particle size were prepared by free radical polymerization. Then, using the polymer PN64(IL)8 with uniform morphology as a templating agent, the ZnO composite photocatalytic materials doped with rare earth metal Ce were prepared in combination with a microwave-assisted and templated hydrothermal reaction method. Series different Ce-doping amount photocatalytic materials ZnO-Ce-x‱ were characterized by XRD, SEM, TEM, XPS, and other methods. The results demonstrated that the templated materials PN64(IL)8 can prepare ZnO-Ce-2‱ with uniform petaloid ambulacra shape, good distribution of elements, and excellent photocatalytic performance. Photocatalytic degradation experiments of methyl orange (MO) showed that when the Ce-doping amount is only 2‱, the degradation rate of organic dyes can reach 96.5% by reacting the photocatalytic materials in water for 1 h. In addition, this kind of photocatalyst can be used for the degradation of high-concentration MO, as well as being easily recovered and effectively reused by simple filtration. Therefore, the structure of this kind of photocatalyst is controllable in the preparation process with an extremely low Ce-doping amount compared with current reports, and it has a good application prospect in the field of wastewater treatment technology.

Gelatin Assisted Cerium–Copper Sulfide Nanoparticles as Efficient Catalysts for the Photocatalytic Degradation of Malachite Green Oxalate Dye Under UV‐A Light

AbstractChemical, petroleum, and dyeing industries generate a wide variety of highly toxic organic wastes. The discharge of this wastewater into the river without treatment will spoil the entire aquatic system. The photocatalytic degradation of dyes/toxic chemicals is considered a favorable technology for industrial wastewater treatment. For this purpose, we have prepared an efficient nanocomposite material. The Gelatin assisted Cerium loaded CuS (Ge−Ce−CuS) nanocomposite was successfully synthesized by a simple hydrothermal method and characterized by BET, UV‐DRS, and PL measurements. The BET surface area of Ge−Ce−CuS (88.6 m2 g−1) is higher than bare CuS (66.0 m2 g‐1). DRS Confirms that the photo‐absorption of Ge−Ce−CuS nanocomposite significantly increases from the 570 nm range to the whole visible region. PL measurements confirm that the CuS loading suppresses electron‐hole recombination of Ge−Ce−CuS. The photocatalytic activity of Ge−Ce−CuS was investigated for the degradation of malachite green oxalate dye (MGO) in an aqueous solution using UV light. The influence of operational parameters such as the amount of photocatalyst, dye concentration, and initial pH on the photo mineralization of MGO dye has been analyzed and discussed. Slightly basic pH enhances the degradation. The mineralization of MGO dye has been confirmed by COD measurements. The intermediates formed during degradations were analyzed by GC‐MS, and a suitable degradation pathway was proposed. The catalyst is found to be reusable. The mechanism of degradation of MGO dye by Ge−Ce−CuS is also proposed.

Carbon footprint analysis of wastewater treatment processes coupled with sludge in situ reduction

The goal of this study was to assess the impacts or benefits of sludge in situ reduction (SIR) within wastewater treatment processes with relation to global warming potential in wastewater treatment plants, with a comprehensive consideration of wastewater and sludge treatment. The anaerobic side-stream reactor (ASSR) and the sludge process reduction activated sludge (SPRAS), two typical SIR technologies, were used to compare the carbon footprint analysis results with the conventional anaerobic - anoxic - oxic (AAO) process. Compared to the AAO, the ASSR with a typical sludge reduction efficiency (SRE) of 30 % increased greenhouse gas (GHG) emissions by 1.1 - 1.7 %, while the SPRAS with a SRE of 74 % reduced GHG emissions by 12.3 - 17.6 %. Electricity consumption (0.025 - 0.027 kg CO2-eq/m3), CO2 emissions (0.016 - 0.059 kg CO2-eq/m3), and N2O emissions (0.009 - 0.023 kg CO2-eq/m3) for the removal of secondary substrates released from sludge decay in the SIR processes were the major contributor to the increased GHG emissions from the wastewater treatment system. By lowering sludge production and the organic matter content in the sludge, the SIR processes significantly decreased the carbon footprints associated with sludge treatment and disposal. The threshold SREs of the ASSR for GHG reduction were 27.7 % and 34.6 % for the advanced dewatering - sanitary landfill and conventional dewatering - drying-incinerating routes, respectively. Overall, the SPRAS process could be considered as a cost-effective and sustainable low-carbon SIR technology for wastewater treatment.

Microwave Radiation in Wastewater Treatment and Sedimentations Treatment Technologies

The main results of research on the use of microwave radiation in wastewater treatment and treatment of their sedimentations, as well as water treatment waste, are presented. The thermal influence of microwaves on the water and sedimentations properties is considered. The experimental data obtained by foreign and domestic specialists for the following processes using microwaves are shown: degradation of organic substances, de-emulsification of oil-containing wastewater, removal of metals, disinfection, intensification of biogas yield, sediments pyrolysis, modification of the absorbents, intensification of compaction and dewatering of natural water treatment sedimentation. New microwave equipment for treatment the various wastes is described.

Long term study on the fate and environmental risks of favipiravir in wastewater treatment plants and comparison with COVID-19 cases

In recent years especially during COVID-19, the increased usage of antiviral drugs has led to increased interest in monitoring their presence in wastewater worldwide. In this study, it was examined the occurrence, fate and environmental risks of favipiravir which is used for COVID-19 treatment in two wastewater treatment plants (WWTPs) with different treatment processes in Istanbul, Turkey. Favipiravir was measured in WWTPs influent samples, effluent samples and sludge samples with maximum concentrations of 97 μg/L, 64.11 μg/L and 182.47 μg/g, respectively. Favipiravir had removal efficiency below 55 % for both WWTPs. Mass balance analysis showed that favipiravir removal in WWTPs mainly attributed to biodegradation/biotransformation. Statistical analysis revealed a significant correlation between favipiravir concentration and COVID-19 incidence in Istanbul. The microbial distribution analysis indicated that comparison of collected COVID-19 pandemic sludge and post-pandemic period sludge samples, a noteworthy reduction in the Chloroflexi and Actinobacteriota phyla at the phylum level was observed. Environmental risk assessment using risk quotients ranged from 168 to 704, indicating that the presence of this antiviral drug posed significant ecological risks to aquatic organisms. The study concluded that WWTPs were releasing antiviral drugs into the environment, thereby posing risks to both the aquatic ecosystem and public health. The results of this study demonstrate the persistence of favipiravir in WWTPs and offer crucial supporting data for further research into the advancement of wastewater treatment technology. Also, this study shows wastewater based monitoring is supplementary and early warning system for determining the occurrence of antiviral drugs.

Experimental investigation of Cd (II) ion adsorption on surface-modified mixed seaweed Biosorbent: A study on analytical interpretation and thermodynamics

Despite advancements in wastewater treatment technologies, heavy metal contamination, especially cadmium (Cd), severely threatens human health and ecosystems. The purpose of this work is to compare the removal of Cd (II) ions from aqueous solutions by chemically modified mixed seaweed biosorbent (CMSB) and physically modified mixed seaweed biosorbent (PMSB). BET, SEM, EDAX, FTIR, and XRD techniques characterized the mixed seaweed biosorbents before and after adsorption. They are well-known for their sustainability, affordability, and biodegradability. The BET study revealed that CMSB had a surface area of 19.682 m2/g, while PMSB had a lower surface area of 14.803 m2/g. The optimum adsorption conditions were a temperature of 303 K, pH of 6.0, and biosorbent dosages of 1 g/L for CMSB and 2.5 g/L for PMSB. For CMSB and PMSB, the most efficient contact times were 40 and 80 min, respectively. The Langmuir model was demonstrated to be the best fit for the experimental data when compared to other isotherm models, with a coefficient of determination, or R2, of 0.9713 and a maximum monolayer capacity of 151.2 mg/g and 181.6 mg/g for physical and chemical activated mixed seaweed biomass. There was a significant relationship between the R2 values of chemically modified and physically modified biomass. The findings demonstrate that pseudo-second-order kinetics more accurately represent the adsorption process than pseudo-first-order and Elovich models. Thermodynamic experiments validated the endothermic, spontaneous and favourable characteristics of the removal process. According to the results of the current study, PMSB and CMSB may be used as effective adsorbents to remove Cd (II) from aqueous solutions.

Emulsion liquid membrane (ELM) enhanced by nanoparticles and ionic liquid for extracting vanadium ions from wastewater.

Emulsion liquid membrane (ELM) stands out as an extraction process that has drawn much attention due to its promising prospects in industrial wastewater treatment technology. Nevertheless, the pivotal challenge is to reach high membrane stability to overcome the obstacle of applying ELM at the industrial scale. In this study, ELM was boosted by using nanoparticles (superparamagnetic iron oxide (Fe2O3)) in the stripping phase (W1) and ionic liquid (1-methyl-3-octyl-imidazolium-hexafluorophosphate [OMIM][PF6) in the oil phase (O) for recovering/extracting vanadium from synthetic wastewater to near completion and at the same time enhancing emulsion stability to be appropriate for industrial application. The vanadium recovery/extraction percentage has been raised significantly in 3min to 99.6% when adding 0.01% (w/w) Fe2O3 NPs (20 to 50nm in size) in the internal phase (W1) and 5% (v/v) [OMIM]PF6 ionic liquid in the oil phase (O). Also, the emulsion stability was considerably improved, and the leakage percentage was reduced to 16% after 3days. The results of this study could be used in the future to remove additional heavy metal ions from industrial effluents.

Na-Kenyaite as Efficient Basic Blue-41 Dye Removal: Synthesis and Regeneration Studies

Na-kenyaite materials are available in nature and can easily be prepared in the laboratory. These materials exhibit interesting adsorption properties; therefore, they can be invested in the new wastewater treatment technologies. This study investigates the removal of basic blue-41 (BB-41) dye from artificially contaminated water using Na-kenyaite materials in batch mode. Firstly, Na-kenyaites were prepared by the hydrothermal process at a temperature of 150 to 170 °C for a period of 2 to 7 days using different silica sources and ratios of SiO2/NaOH/H2O. The prepared materials were characterized by different techniques such as XRD, FTIR, 29Si MAS NMR, TGA/DTA, SEM, and nitrogen adsorption isotherms. A pure Na-kenyaite phase was successfully obtained using a fumed silica source and 5SiO2/Na2O/122H2O ratio. The removal experiments of basic blue-41 estimated the effectiveness of Na-kenyaites in removing properties, investigating the influence of the solid dosage, initial basic blue-41 concentration, and solution pH or Na-kenyaite solid. Results showed optimal dye removal of around 99% at pH levels above 7. Furthermore, the estimated maximum removal capacity from the Langmuir isotherm was between 124 and 165 mg/g. The results demonstrated efficient removal by Na-kenyaites and its prominence for wastewater treatment. Finally, this study explored the regeneration and reuse of Na-kenyaites through seven cycles and reported a design of a batch adsorber system to reduce the initial concentration of 200 mg/L at different percentages.

Study on the treatment of oil production wastewater by corona discharge coupling Fenton reagent

As the main by-product of oil production, oil production wastewater has the characteristics of high organic content and poor biodegradability, which makes the low temperature plasma wastewater treatment technology get new development. The Ground electrode atomization negative corona discharge（GEANCD） technology increases the discharge current on the basis of traditional corona discharge, but the uneven atomization of liquid is a key challenge at present, which will have a great impact on the degradation of wastewater pollutants. In this study, the GEANCD reactor was redesigned and a self-developed spiral wire hole electrode (SWHE) was used to replace the conventional wire electrode (WE). The discharge characteristics of the reactor under the two electrode structures were investigated and the optimal discharge parameters were determined. Under the optimum discharge parameters, the treatment effect of the two electrode structures with or without coupling Fenton reagent on oil production wastewater was also compared. The experimental results show that under the optimal discharge parameters of flow rate of 25 mL/min, plate electrode distance of 50 mm and discharge voltage of 14 kV, the reactor equipped with SWHE has higher discharge current, and the treatment effect of oil production wastewater is better when coupled with Fenton reagent.

Characterization and application of LDH with chitosan composites investigated by positron annihilation lifetime spectroscopy and surface texture for the adsorption of methyl orange

With a rapid increase in industrial growth around the world, the demand for an entirely novel category of nanoparticles and technologies for wastewater treatment has become a key concern for environmental protection. Recently, hybrids of layered double hydroxides (LDH), particularly those containing LDH, have gained attention as potential nanoscale adsorbents for water treatment. Recent research has shown that LDH-containing composites are interesting versatile materials with the ability to be used in energy storage, photocatalysis, nanocomposites, and water treatment. In the current work, LDH-containing composites were utilized as adsorbents for the purpose of purifying water. The adsorbents investigated are Zn–Co–Fe/LDH/Chitosan-in situ sample preparation (LDH/CS1) and Zn–Co–Fe/LDH/Chitosan-ex situ sample preparation (LDH/CS2). Furthermore, LDH/CS1 and LDH/CS2 were investigated for wastewater treatment from methyl orange dye (MO) with various adsorption conditions. When the initial MO concentration was 20 mg/L and the amount of adsorbent was 0.1 g, the removal efficiency reached 72.8 and 91.7% for LDH/CS1 and LDH/CS2, respectively. The MO’s maximum adsorption capabilities are 160.78 and 165.89 mg/g for LDH/CS1 and LDH/CS2, respectively, which is much greater than that of comparable commercial adsorbents. MO adsorption onto LDH/CS1 and LDH/CS2 was best characterized by the pseudo-second-order kinetic model. The equilibrium adsorption data was followed by the Freundlich and Langmuir models. The adsorption is favorable as evidenced by the equilibrium parameter RL values for MO adsorption onto LDH/CS1 and LDH/CS2, which were 0.227 and 0.144, respectively. Using the free volume distribution method and the positron annihilation lifetime technique, the nanostructure of the materials was examined.

Crystal phase-driven performance of MnO2 in aqueous phase low-temperature thermal catalysis: Synergistic interactions between Mn3+ and surface lattice oxygen

Catalytic oxidation at mild conditions is crucial for mitigating the high pressure and high temperature challenges associated with current catalytic wet air oxidation (CWAO) technologies in wastewater treatment. Among potential materials for catalytic oxidation reactions, polycrystalline MnO2 existed in natural minerals holds considerable promise. However, the relationships between different crystal phases of MnO2 and their catalytic activity sources in aqueous phase remain uncertain and subject to debate. In this research, we synthesized various MnO2 crystal phases, comprising α-, β-, δ-, γ-, ε-, and λ-MnO2, and assessed their catalytic oxidation efficiency during low-temperature heating for treatment of organic pollutants. Our findings demonstrate that λ-MnO2 exhibits the highest catalytic activity, followed by δ-MnO2, γ-MnO2, α-MnO2, ε-MnO2, and β-MnO2. The variations in catalytic activity among different MnO2 are attributed to variances in their oxygen vacancy abundance and redox activity. Furthermore, we identified the primary active species, which include Mn3+ and superoxide radicals (•O2–) generated by surface lattice oxygen of MnO2. This research highlights the critical role of crystal phases in influencing oxygen vacancy content, redox activity, and overall catalytic performance, providing valuable insights for the rational design of MnO2 catalysts tailored for effective organic pollutant degradation in CWAO applications.

Novel insights into the biological state in algal-bacterial granular sludge granulation: Armor-like protection provided by the algal barrier

Algal-bacterial granular sludge (ABGS) composed of microalgae and aerobic granular sludge, is a sustainable and promising technology for wastewater treatment. However, the formation mechanism of ABGS has not been clearly defined, and the direct formation of ABGS in saline wastewater has rarely been investigated. This study proposed novel insights into the granulation process of ABGS by assembling the algal barrier, which was successfully cultivated directly in saline wastewater. The results concluded that ABGS with the algal barrier maintained a higher biomass (MLSS of 7046 ± 61 mg/L), larger particle sizes (1.21 ± 0.06 mm), and better settleability (SVI30 of 46 ± 1 mL/g), enabling efficient pollutants removal. Soluble microbial products (SMP) were found to be closely related to the emergence of the algal barrier. In addition, under salinity stress, the high production of extracellular polymeric substances (EPS, 133.70 ± 1.40 mg/g VSS), specifically TB-EPS (90.29 ± 1.12 mg/g VSS), maintained a crucial role in the formation of ABGS. Further analysis indicated that biofilm producing bacteria Pseudofulvimonas and filamentous eukaryote Streptophyta were the key players in ABGS formation with the algal barrier. Furthermore, the enhancement of key genes and enzymes involved in nitrogen metabolism, TCA cycle, and polysaccharide metabolism suggested a more robust protective effect provided by the algal barrier. This study is expected to advance the application of simultaneous ABGS formation and pollutant removal in wastewater.

Investigations of nanomaterial-based membranes for efficient removal of contaminants from wastewater via membrane distillation: a critical review

The requirement for wastewater treatment is paramount in ensuring environmental sustainability and safeguarding public health. As industrialization and urbanization accelerate, the volume of wastewater generated continues to increase, containing a diverse range of pollutants and contaminants. Untreated wastewater poses serious threats to ecosystems, water bodies, and human communities, leading to pollution, waterborne diseases, and ecological imbalances. Effective wastewater treatment becomes essential to mitigate these adverse effects by removing or reducing pollutants before discharge into natural water sources. This process helps to preserve water quality, protect aquatic life, and maintain the overall health of ecosystems. Membrane distillation (MD) has emerged as a promising technology for wastewater treatment, offering an innovative approach to address the challenges associated with conventional treatment methods. In MD, a hydrophobic membrane serves as a selective barrier, allowing water vapor to pass through while preventing the passage of contaminants. This paper offers an extensive overview of the latest advancements in nanotechnology and membrane distillation applied in wastewater treatment. We will delve into different types of nanomaterials that have been used to enhance the properties of MD membranes, such as nanocomposites, nanoparticles, and nanofiber membranes. We also explore the mechanisms by which these nanomaterials improve the separation efficiency, anti-fouling properties, and durability of MD membranes. Additionally, we highlight the potential of hybrid membranes that combine different types of nanomaterials for further improving the performance of MD in wastewater treatment. We provide examples of recent studies that have investigated the use of hybrid membranes, including carbon nanotube-graphene oxide hybrid membranes, nanocomposite nanofiber membranes, and silver nanoparticle-embedded membranes. We also identify some areas for future research and development, such as the scale-up and commercialization of nanotechnology-based MD systems. In summary, this review paper highlights the potential of nanotechnology to enhance the performance of MD in wastewater treatment, leading to improved water quality and a cleaner environment.

Self-regulation strategy of influent dissolved oxygen in ANAMMOX unit of domestic wastewater onsite source-separation and synergistic treatment process

An onsite source-separation and synergistic treatment (O3ST) process has been proposed in a previous study. In the study, it was found that toilet wastewater is characterized by spontaneously realizing and stably maintaining a partial nitritation (PN) without dissolved oxygen (DO) control. On this basis, to realize the goal of practical application of ANAMMOX technology following the PN in the O3ST process, this paper carries out the key research on the self-regulation strategy of DO in the effluent of PN unit to reduce the influent DO of ANAMMOX unit. By adding a buffer unit between the PN and ANAMMOX unit with an effective volume of 50.0 % of the PN unit, an interconnecting area of 0.9 % of the coplanar area of the PN and buffer unit, an overflow length of 35.7 % of the width of the PN unit, the automatic control to reduce the amount of DO diffusion and residual in the buffer unit was realized, and the DO concentration of the influent from the buffer to ANAMMOX unit was guaranteed to be less than 1.00 mg/L. Successful application of ANAMMOX technology can increase the TN removal efficiency of the process from a bottleneck value of 66.0 % to 84.0 %, with 44.0 % of the TN removal occurring in the ANAMMOX unit. This study is expected to apply the ANAMMOX technology in a low-maintenance or even no-maintenance form in the O3ST process, which is both an expansion of the application scope of the ANAMMOX technology and a breakthrough in decentralized wastewater treatment technology.

Treatment of greywater using a non-aerated combined horizontal and vertical flow constructed wetland

ABSTRACT Human, animal, and plant health is universally paramount, yet the release of poorly treated wastewater into the environment poses a significant risk to all life forms. Hence the need to employ wastewater treatment technologies to curb these health risks. Due to the need to adopt sustainable wastewater treatment technologies, this study investigated the use of a non-aerated hybrid horizontal and vertical flow constructed wetland for the removal of heavy metals and microorganisms from greywater. This was done at six different hydraulic retention times. Results showed significant reductions (p < 0.05) in heavy metal (manganese, zinc, cadmium, magnesium, chromium, and iron) concentrations, with some showing compliance to Ghana's Environmental Protection Agency and the United Kingdom National Environment Regulation recommended discharge limits. Heavy metal concentrations in effluent samples ranged from as low as 0.00 ± 0.15–0.23 ± 0.06 mg/L. Furthermore, there were significant reductions in Escherichia coli and Salmonella typhi (p < 0.05), which also showed compliance to Ghana's Environmental Protection Agency effluent discharge standards. The effluents from the system at HRT 3 days showed high removal efficiency ranges of 82–90% of bacteria. It is recommended that hybrid constructed wetlands should be incorporated in the treatment of greywater.

Phosphorous speciation in EPS extracted from Aerobic Granular Sludge

Wastewater treatment technologies opened the door for recovery of extracellular polymeric substances (EPS), presenting novel opportunities for use across diverse industrial sectors. Earlier studies showed that a significant amount of phosphorus (P) is recovered within extracted EPS. P recovered within the extracted EPS is an intrinsic part of the recovered material that potentially influences its properties. Understanding the P speciation in extracted EPS lays the foundation for leveraging the incorporated P in EPS to manipulate its properties and industrial applications. This study evaluated P speciation in EPS extracted from aerobic granular sludge (AGS). A fractionation lab protocol was established to consistently distinguish P species in extracted EPS liquid phase and polymer chains. 31P nuclear magnetic resonance (NMR) spectroscopy was used as a complementary technique to provide additional information on P speciation and track changes in P species during the EPS extraction process. Findings showed the dominance of organic phosphorus and orthophosphates within EPS, besides other minor fractions. On average, 25% orthophosphates in the polymer liquid phase, 52% organic phosphorus (equal ratio of mono and diesters) covalently bound to the polymer chains, 16% non-apatite inorganic phosphorus (NAIP) precipitates mainly FeP and AlP, and 7% pyrophosphates (6% in the liquid phase and 1% attached to the polymer chains) were identified. Polyphosphates were detected in initial AGS but hydrolyzed to orthophosphates, pyrophosphates, and possibly organic P (forming new esters) during the EPS extraction process. The knowledge created in this study is a step towards the goal of EPS engineering, manipulating P chemistry along the extraction process and enriching certain P species in EPS based on target properties and industrial applications.

Advanced Treatment Technologies for Pollutants Removal in Wastewater

Conventional wastewater treatment technologies have been extensively studied for degrading organic matter, suspended solids, nutrient removal, and lowering microbial loads. They produce acceptable-quality effluent, but researchers have reported several limitations. Recently, advanced wastewater treatment technologies have preceded as an alternative to the degradation of recalcitrant wastes such as persistent organic compounds (POPs), pharmaceutically active compounds (PhACs), contaminants of emerging concern (CECs), and heavy metals (H.M). They can be physical, chemical, biological, or integration between one or more technologies. This is to meet the requirements for reuse for different purposes, minimize or prevent the negative impacts on the environment, and create new untraditional water resources to solve the water shortage problem. This article is a collected review of advanced wastewater treatment technologies. Also, the applications of these technologies with special concern for partially/hardly degradable pollutants from wastewater are indicated. They are eco-friendly, cost-effective, low-energy systems with a small footprint. Their selection depends on the characterization of wastewater, biodegradability, available footprint, quality of treated effluent required, cost, availability of funds, and personal skills.

Mechanisms of denitrifying granular sludge disintegration and calcium ion-enhanced re-granulation in acidic wastewater treatment

Granular sludge is an alternative technology for the direct treatment of acidic nitrate-containing wastewater. Rapid remediation of disintegrated granules is essential to achieve efficient nitrogen removal. In this study, denitrifying granules were inactivated and disintegrated when the influent nitrate-nitrogen concentration was elevated from 240 to 360 mg L−1 in acidic wastewater (pH = 4.1) in a sequencing batch reactor. Tightly bound extracellular polymeric substances (TB-EPS) decreased by 60%, and extracellular protein (PN) was the main component of the reduced EPS. The three-dimensional excitation emission matrices (3D-EEM) results confirmed that the PNs that decreased were mainly tryptophan-like, tyrosine-like, and aromatic. This study further confirmed that the decrease in PN was mainly from the destruction of C=O (amide I) and N–H functional groups. Overloading of nitrogen-inhibited denitrifying activity and the destruction and dissolution of TB-EPS by acidic pH were responsible for granule disintegration, with PNs playing a major role in maintaining granule stability. Based on this, new granules with an average particle size of 454.4 μm were formed after calcium chloride addition; EPS nearly doubled during granule formation with PN as the dominant component, accounting for 64.7–78.4% of the EPS. Atomic force microscopy (AFM) revealed that PN-PN adhesion increased by 1.6–4.9 times in the presence of calcium ions, accelerating the re-granulation of disintegrated particles. This study provides new insights into the disintegration and remediation of granular sludge under acidic conditions.

Biodegradation kinetics of organic micropollutants in biofilters for advanced wastewater treatment – Impact of operational conditions and biomass origin on removal

Biofiltration processes are often part of advanced wastewater treatment (aWWT) technologies for the removal of organic micropollutants (OMP) from conventional wastewater treatment plant (WWTP) effluents. Although biological effects are not always the main focus of these technologies (e.g. filtration through granular activated carbon), they have been shown to contribute significantly to total OMP removal. While OMP biodegradation kinetics in conventional biological wastewater treatment are well researched, no systematic comparison to biomass from aWWT is available. This biomass faces different growth conditions and higher OMP concentrations relative to the background organic matter. Adaptation to these conditions could be possible and could lead to faster OMP biodegradation kinetics, which would show in a larger pseudo first-order biodegradation kinetic constant kbiol. In this work, kbiol values for biomass obtained from aWWT biofilters were determined by evaluating OMP removals measured in lab-scale biofilters using a mechanistic model of the experimental setup. A comparison to kbiol values from literature for conventional wastewater treatment (with nutrient removal) revealed similar OMP biodegradation kinetics without any advantages of biomass from aWWT. A conceptual evaluation of influencing factors on OMP removal in biofilters showed that operational parameters (such as the biomass concentration or the empty bed contact time) and the affinity of OMPs to adsorb on biomass have a significant additional effect on biological OMP removal. Therefore, kbiol values alone are not sufficient to estimate biological OMP removal in biofilters and further information about the system is required.

Adsorbent based on MOF-5/cellulose aerogel composite for adsorption of organic dyes from wastewater

Industries persistently contribute to environmental pollution by releasing a multitude of harmful substances, including organic dyes, which represent a significant hazard to human health. As a result, the demand for effective adsorbents in wastewater treatment technology is steadily increasing so as to mitigate or eradicate these environmental risks. In response to this challenge, we have developed an advanced composite known as MOF-5/Cellulose aerogel, utilizing the Pampas plant as a natural material in the production of cellulose aerogel. Our investigation focused on analyzing the adsorption and flexibility characteristics of this novel composite for organic dye removal. Additionally, we conducted tests to assess the aerogel’s reusability and determined that its absorption rate remained consistent, with the adsorption capacity of the MOF-5/cellulose aerogel composite only experiencing a marginal 5% reduction. Characterization of the material was conducted through XRD analysis, revealing the cubic structure of MOF aerogel particles under scanning electron microscopy. Our study unequivocally demonstrates the superior adsorption capabilities of the MOF-5/cellulose aerogel composite, particularly evident in its efficient removal of acid blue dye, as evaluated meticulously using UV–Vis spectrophotometric techniques. Notably, our findings revealed an impressive 96% absorption rate for the anionic dye under acidic pH conditions. Furthermore, the synthesized MOF-5/cellulose aerogel composite exhibited Langmuir isotherm behavior and followed pseudo-second-order kinetics during the absorption process. With its remarkable absorption efficiency, MOF-5/cellulose aerogel composites are poised to emerge as leading adsorbents for water purification and various other applications.