The present work investigates the part-load performance of a MW-scale sCO2 power plant designed as waste heat recovery unit for an existing cement plant located in Czech Republic, in the framework of the H2020 funded project CO2OLHEAT. The study first presents the selected power plant configuration and then focuses on the evaluation of its part-load operation due to variation of flue gas mass flow rate and temperature. The range of flue gas conditions at the outlet of the upstream process is retrieved from a preliminary statistical analysis of historical trends obtained through the cement plant monitoring. The numerical model developed for this study aims at providing realistic results thanks to the adoption of turbomachinery performance maps provided by the turbomachinery manufacturer of the project. Moreover, heat exchangers have been modelled through a discretized approach which has been validated against manufacturer data, while piping inventory and pressure losses have been assessed through a preliminary sizing that considers the actual distances to be covered in the cement plant. Performance decay is estimated for the whole range of flue gas conditions, reporting the most significant power cycle parameters, and identifying the main causes of efficiency loss. The part-load analysis is carried out considering a constant CO2 inventory, in order to reduce the system complexity and capital cost and simplify plant operation. Results show that the operation entails minor variation of the compressors operative points in the whole range of operating conditions of the cement plant, avoiding the risk of anti-surge bypass activation. Moreover, the plant is able to work close to the nominal thermodynamic cycle efficiency (20.5%-23.0%) for most of the year and benefits from part-load operation in terms of overall performance. In the last part of the work, a preliminary techno-economic analysis of the plant is also presented to highlight the potential advantages of sCO2 technology applied to waste heat recovery applications. The results of the part-load performance of the plant are combined with the flue gases data obtained from the preliminary statistical analysis and the cement plant historical monitoring. An annual electricity production equal to 13’909.7 MWh is obtained, corresponding to 6560 equivalent hours and a system capacity factor of 74.9%. The investment cost of each CO2OLHEAT plant component is estimated by means of cost correlations obtained from literature and the non-discounted payback time is computed as a function of the electricity price. The results show that, even considering electricity prices before 2022, the payback time of the CO2OLHEAT plant is estimated to be lower than 8 years, justifying the industrial interest in the proposed technology.