T7 RNA Polymerase Research Articles

MRNA produced by VSW-3 RNAP has high-level translation efficiency with low inflammatory stimulation

In vitro preparation of mRNA is a key step for mRNA therapeutics. The widely used T7 RNA polymerase (RNAP) was shown to have many by-products during in vitro transcription (IVT) process, among which double-stranded RNA (dsRNA) is the major by-product to activate the intracellular immune response. Here, we describe the use of a new VSW-3 RNAP that reduced dsRNA production during IVT and the resulting mRNA exhibited low inflammatory stimulation in cells. Compared to T7 RNAP transcripts, these mRNA exhibited superior protein expression levels, with an average of 14-fold increase in Hela cells and 5-fold increase in mice. In addition, we found that VSW-3 RNAP did not require modified nucleotides to improve protein production of IVT products. Our data suggest that VSW-3 RNAP could be a useful tool for mRNA therapeutics. • Compared to T7 RNAP, VSW-3 RNAP reduces dsRNA byproducts. • mRNA by VSW-3 RNAP exhibits higher levels of protein expression than that by T7 RNAP. • VSW-3 RNAP does not need modified nucleotides for mRNA production.

Synthetic evolution of herbicide resistance using a T7 RNAP-based random DNA base editor.

Synthetic directed evolution via localized sequence diversification and the simultaneous application of selection pressure is a promising method for producing new, beneficial alleles that affect traits of interest in diverse species; however, this technique has rarely been applied in plants. Here, we designed, built, and tested a chimeric fusion of T7 RNA Polymerase (RNAP) and deaminase to enable the localized sequence diversification of a target sequence of interest. We tested our T7 RNAP-DNA base editor in <i>Nicotiana benthamiana</i> transient assays to target a transgene expressing <i>GFP</i> under the control of the T7 promoter and observed C-to-T conversions. We then targeted the T7 promoter-driven <i>acetolactate synthase</i> sequence that had been stably integrated in the rice genome and generated C-to-T and G-to-A transitions. We used herbicide treatment as selection pressure for the evolution of the <i>acetolactate synthase</i> sequence, resulting in the enrichment of herbicide-responsive residues. We then validated these herbicide-responsive regions in the transgenic rice plants. Thus, our system could be used for the continuous synthetic evolution of gene functions to produce variants with improved herbicide resistance.

Preparation of luciferase-expressing mRNA and expression characteristics of mRNA delivered by electroporation in vivo

In this study, we aimed to construct a non-replication mRNA platform and explore the side effects of electroporation-mediated delivery of mRNA on the mice as well as the expression features of the mRNA. With luciferase gene as a marker, in vitro transcription with T7 RNA polymerase was carried out for the synthesis of luciferase-expressed mRNA, followed by enzymatic capping and tailing. The mRNA was delivered in vivo by electroporation via an in vivo gene delivery system, and the expression intensity and duration of luciferase in mice were observed via an in vivo imaging system. The results demonstrated that the mRNA transcripts were successfully expressed both in vitro and in vivo. The electroporation-mediated delivery of mRNA had no obvious side effects on the mice. Luciferase was expressed successfully in all the mRNA-transduced mice, while the expression intensity and duration varied among individuals. Overall, the expression level peaked on the first day after electroporation and rapidly declined on the fourth day. This study is of great importance for the construction of non-replication mRNAs and their application in vaccine or antitumor drug development.

Enhanced recombinant carbonic anhydrase in T7RNAP-equipped Escherichia coli W3110 for carbon capture storage and utilization (CCSU)

Sulfurihydrogenibium yellowstonense carbonic anhydrase (SyCA) is a well-known thermophilic CA for carbon mineralization. To broaden the applications of SyCA, the activity of SyCA was improved through stepwise engineering and in different cultural conditions, as well as extended to co-expression with other enzymes. The engineered W3110 strains with 4 different T7 RNA polymerase levels were employed for SyCA production. As a result, the best strain WT7L cultured in modified M9 medium with temperature shifted from 37 to 30 °C after induction increased SyCA activity to 9122 U/mL. The SyCA whole-cell biocatalyst was successfully applied for carbon capture and storage (CCS) of CaCO3. Furthermore, SyCA was applied for low-carbon footprint synthesis of 5-aminolevulinic acid (5-ALA) and cadaverine (DAP) by coupling with ALA synthetase (ALAS) and lysine decarboxylase (CadA), suppressing CO2 release to −6.1 g-CO2/g-ALA and −2.53 g-CO2/g-DAP, respectively. Harnessing a highly active SyCA offers a complete strategy for CCSU in a green process.

Rapid and reliable RNA resonance assignment by combining chemical and enzymatic stable isotope labeling

In this work a rapid RNA assignment approach by combining chemical and enzymatic 13C and 15N stable isotope labeling is introduced. We exemplify the assignment strategy for imino N1H1 purine and N3H3 pyrimidine and aromatic C6H6 pyrimidine, C8H8 purine and C2H2 adenine resonances for a non-coding RNA comprising 66 nucleotides. The assignment strategy is based on position specific labeling by chemical solid phase synthesis and dilute stable isotope 13C/15N-labeling by mixing labeled and commercially available unlabeled RNA phosphoramidites. The assignment process is further facilitated by nucleotide specific labeling using T7 RNA polymerase in vitro transcription with in house produced atom specific 13C labeled ribonucleotide triphosphates. The approach is fast with a total NMR measurement time of only 22 h and also competitive in terms of costs as compared to the standard methodology relying on in vitro transcription using 2H, 15N and 13C/15N uniformly labeled ribonucleotide triphosphates. Furthermore, the assignment procedure revealed a slow exchange process on the NMR chemical shift time scale in the 66 nt non-coding RNA with possible biological implications in the regulation of bacterial competence.

Reprogramming T7RNA Polymerase in Escherichia coli Nissle 1917 under Specific Lac Operon for Efficient p-Coumaric Acid Production.

Lac operon is the standard regulator used to control the orthogonality of T7RNA polymerase (T7RNAP) and T7 promoter inEscherichia coli BL21(DE3) strain for protein expression. However,E. coliNissle 1917 (EcN), the unique probiotic strain, has seldom been precisely adapted to the T7 system. Herein, we applied bioinformatics analysis on Lac operon from different strains, and it was observed that a weak promoter for LacI repressor existed in EcN. Furthermore, X-gal assay revealed a strong expression of lacZ in EcN. We demonstrated that Lac operon significantly affected the protein expression in the two T7-derived EcN, in which T7RNAP was integrated at lambda (ET7L) and HK022 (ET7H), respectively. Different combinations of replication origin, chaperonin GroELS, inducer, and medium were explored to fine-tune the best strain with tyrosine ammonia-lyase (TAL) for p-coumaric acid (pCA) production, which is one of the essential bioactive compounds for human health. Finally, the highest pCA conversion of 78.8% was achieved using RRtL (plasmid form) under the optimum condition, and a 51.5% conversion was obtained with L::Rt strain which has integrated T7-RtTAL at HK022 of ET7L in the simulated gut environment. The appropriate reprogramming of T7RNAP expedites EcN as an effective and promising cell factory for live bacterial therapeutics in the future.

Exploiting spatial dimensions to enable parallelized continuous directed evolution

Current strategies to improve the throughput of continuous directed evolution technologies often involve complex mechanical fluid‐controlling system or robotic platforms, which limits their popularization and application in general laboratories. Inspired by our previous study on bacterial range expansion, in this study, we report a system termed SPACE for rapid and extensively parallelizable evolution of biomolecules by introducing spatial dimensions into the landmark phage‐assisted continuous evolution system. Specifically, M13 phages and chemotactic Escherichia coli cells were closely inoculated onto a semisolid agar. The phages came into contact with the expanding front of the bacterial range, and then comigrated with the bacteria. This system leverages competition over space, wherein evolutionary progress is closely associated with the production of spatial patterns, allowing the emergence of improved or new protein functions. In a prototypical problem, SPACE remarkably simplified the process and evolved the promoter recognition of T7 RNA polymerase (RNAP) to a library of 96 random sequences in parallel. These results establish SPACE as a simple, easy to implement, and massively parallelizable platform for continuous directed evolution in general laboratories.

Developing a dynamic equilibrium system in Escherichia coli to improve the production of recombinant proteins.

The combination of Escherichia coli BL21 (DE3) and the pET expression system is used extensively for the expression of various recombinant proteins (RPs). However, RP overexpression often introduces a growth burden for the host, especially in the case of toxic proteins. The key to solving this problem is to reduce the host burden associated with protein overproduction, which is often achieved by regulating the expression or activity of T7 RNAP or growth-decoupled systems. However, these strategies mainly relieve or interrupt the robbing of host resources, and do not eliminate other types of host burdens in the production process. In this study, we constructed a production system based on a dynamic equilibrium to precisely relieve the host burden and increase the RP production. The system is composed of three modules, including the overexpression of basic growth-related genes (rRNA, RNAP core enzyme, sigma factors), prediction and overexpression of key proteins using the enzyme-constrained model ec_iECBD_1354, and dynamic regulation of growth-related and key protein expression intensity based on a burden-driven promoter. Using this system, the production of many high-burden proteins, including autolysis protein and E. coli membrane proteins, was increased to varying degrees. Among them, the cytosine transporter protein (CodB) was most significantly improved, with a 4.02-fold higher production compared to the wild strain. This system can effectively reduce the optimizing costs, and is suitable for developing various types of RP expression hosts rapidly. KEY POINTS: • The basic growth-related resources can relieve the host burden from recombinant protein. • The enzyme-constrained model can accurately predict key genes to improve yield. • The expression intensity can be dynamically adjusted with changes in burden.

Autoinhibited transient, gated, and cascaded dynamic transcription of RNAs.

Following transient spatiotemporal misregulation of gene expression programs by native transcription machineries, we introduce a versatile biomimetic concept to design transient dynamic transcription machineries, revealing gated and cascaded temporal transcription of RNAs. The concept is based on the engineering of the reaction module consisting of malachite green (MG) and/or DFHBI {(5Z)-5-[(3,5-difluoro-4-hydroxyphenyl)methylene]-3,5-dihydro-2,3-dimethyl-4H-imidazol-4-one} DNA scaffolds, T7 RNA polymerase (RNAP) aptamer transcription scaffold, and the inhibited T7 RNAP-aptamer complex. In the presence of the counter RNAP aptamer strand and ribonucleoside triphosphates, the triggered activation of the three transcription scaffolds are activated, leading to the transcription of the MG and/or DFHBI RNA aptamer and to the transcription of the RNAP aptamer acting as an autoinhibitor that leads to the transient temporal, dissipative, and blockage of all transcription. By appropriate design of the transcription scaffolds and the inhibitors/coupler, transient gated and cascaded transcription processes are demonstrated, and a bimodal transcription module synthesizing a transient operating ribozyme is introduced.

Bis-enzyme cascade CRISPR-Cas12a platform for miRNA detection

MicroRNA (miRNA) play a vital role in the pathological development of many diseases. It is considered to be the diagnosis and potential biomarkers of prognosis. Herein, we proposed Bis-enzyme cascade Platform by combining T7 RNA polymerase and CRISPR-Cas12a (BPTC) for a miRNA detection. In the proposed BPTC, the RNA to DNA conversion ability of phi29 amplification and trans-cleavage of CRISPR-Cas12a are combined. The target miRNA can be amplified after binding to the recognizer ssDNA, and then transcribed the CRISPR-derived RNA (crRNA) by T7 RNA polymerase. The produced crRNA can thereby be assembled by CRISPR-Cas12a and recognized with its target dsDNA, thus triggered its trans-cleavage towards surrounding fluorescent reporters, labeled with a fluorophore and a corresponding quenching group. Based on the bis-enzyme cascade system, the biosensor shows highly sensitivity and excellent specificity. Moreover, this study provided a novel all-in-one detect strategy for miRNA and may open a new idea for the design of CRISR-Cas-based miRNA biosensing platforms.

Lighting-up aptamer transcriptional amplification for highly sensitive and label-free FEN1 detection

Specific and sensitive detection of flap endonuclease 1 (FEN1), an enzyme biomarker involved in DNA replications and several metabolic pathways, is of high values for the diagnosis of various cancers. In this work, a fluorescence strategy based on transcriptional amplification of lighting-up aptamers for label-free, low background and sensitive monitoring of FEN1 is developed. FEN1 cleaves the 5′ flap of the DNA complex probe with double flaps to form a notched dsDNA, which is ligated by T4 DNA ligase to yield fully complementary dsDNA. Subsequently, T7 RNA polymerase binds the promoter region to initiate cyclic transcriptional generation of many RNA aptamers that associate with the malachite green dye to yield highly amplified fluorescence for detecting FEN1 with detection limit as low as 0.22 pM in a selective way. In addition, the method can achieve diluted serum monitoring of low concentrations of FEN1, exhibiting its potential for the diagnosis of early-stage cancers.

Implementation of a Novel Optogenetic Tool in Mammalian Cells Based on a Split T7 RNA Polymerase.

Optogenetic tools are widely used to control gene expression dynamics both in prokaryotic and eukaryotic cells. These tools are used in a variety of biological applications from stem cell differentiation to metabolic engineering. Despite some tools already available in bacteria, no light-inducible system currently exists to control gene expression independently from mammalian transcriptional and/or translational machineries thus working orthogonally to endogenous regulatory mechanisms. Such a tool would be particularly important in synthetic biology, where orthogonality is advantageous to achieve robust activation of synthetic networks. Here we implement, characterize, and optimize a new optogenetic tool in mammalian cells based on a previously published system in bacteria called Opto-T7RNAPs. The tool is orthogonal to the cellular machinery for transcription and consists of a split T7 RNA polymerase coupled with the blue light-inducible magnets system (mammalian OptoT7–mOptoT7). In our study we exploited the T7 polymerase’s viral origins to tune our system’s expression level, reaching up to an almost 20-fold change activation over the dark control. mOptoT7 is used here to generate mRNA for protein expression, shRNA for protein inhibition, and Pepper aptamer for RNA visualization. Moreover, we show that mOptoT7 can mitigate the gene expression burden when compared to another optogenetic construct. These properties make mOptoT7 a powerful new tool to use when orthogonality and viral RNA species (that lack endogenous RNA modifications) are desired.

High-Throughput Cell-Free Screening of Eukaryotic Membrane Proteins in Lipidic Mimetics.

Membrane proteins (MPs) carry out important functions in the metabolism of cells, such as the detection of extracellular activities and the transport of small molecules across the plasma and organelle membranes. Expression of MPs for biochemical, biophysical, and structural analysis is in most cases achieved by overexpression of the desired target in an appropriate host, such as a bacterium. However, overexpression of MPs is usually toxic to the host cells and can lead to aggregation of target protein and to resistance to detergent extraction. An alternative to cell-based MP expression is cell-free (CF), or in vitro, expression. CF expression of MPs has several advantages over cell-based methods, including lack of toxicity issues, no requirement for detergent extraction, and direct incorporation of target proteins in various lipidic mimetics. This article describes a high-throughput method for the expression and purification of eukaryotic membrane proteins used in the author's lab. Basic Protocol 1 describes the selection and cloning of target genes into appropriate vectors for CF expression. Basic Protocol 2 describes the assembly of CF reactions for high-throughput screening. Basic Protocol 3 outlines methods for purification and detection of target proteins. Support Protocols 1-6 describe various accessory procedures: amplification of target, treatment of vectors to prepare them for ligation-independent cloning, and the preparation of S30 extract, T7 RNA polymerase, liposomes, and nanodiscs. © 2022 Wiley Periodicals LLC. Basic Protocol 1: Target selection, construct design, and cloning into pET-based expression vectors Support Protocol 1: Amplification of target DNA Support Protocol 2: Preparation of ligation-independent cloning (LIC)-compatible vectors Basic Protocol 2: Assembly of small-scale cell-free reactions for high-throughput screening Support Protocol 3: Preparation of Escherichia coli S30 extract Support Protocol 4: Preparation of T7 RNA polymerase Support Protocol 5: Preparation of liposomes Support Protocol 6: Preparation of nanodiscs Basic Protocol 3: Purification and detection of cell-free reaction products.

Significance of chlorine-dioxide-based oral rinses in preventing SARS-CoV-2 cell entry.

ObjectiveThis work aims to determine the efficacy of preprocedural oral rinsing with chlorine dioxide solutions to minimize the risk of coronavirus disease 2019 (COVID‐19) transmission during high‐risk dental procedures.MethodsThe antiviral activity of chlorine‐dioxide‐based oral rinse (OR) solutions was tested by pre‐incubating with severe acute respiratory syndrome coronavirus 2 (SARS‐CoV‐2) pseudovirus in a dosage‐dependent manner before transducing to human embryonic kidney epithelial (HEK293T‐ACE2) cells, which stably expresses ACE‐2 receptor. Viral entry was determined by measuring luciferase activity using a luminescence microplate reader. In the cell‐to‐cell fusion assay, effector Chinese hamster ovary (CHO‐K1) cells co‐expressing spike glycoprotein of SARS‐CoV‐2 and T7 RNA polymerase were pre‐incubated with the ORs before co‐culturing with the target CHO‐K1 cells co‐expressing human ACE2 receptor and luciferase gene. The luciferase signal was quantified 24 h after mixing the cells. Surface expression of SARS‐CoV‐2 spike glycoprotein and ACE‐2 receptor was confirmed using direct fluorescent imaging and quantitative cell‐ELISA. Finally, dosage‐dependent cytotoxic effects of ORs were evaluated at two different time points.ResultsA dosage‐dependent antiviral effect of the ORs was observed against SARS‐CoV‐2 cell entry and spike glycoprotein mediated cell‐to‐cell fusion. This demonstrates that ORs can be useful as a preprocedural step to reduce viral infectivity.ConclusionsChlorine‐dioxide‐based ORs have a potential benefit for reducing SARS‐CoV‐2 entry and spread.

Enzymatic incorporation of an isotope-labeled adenine into RNA for the study of conformational dynamics by NMR.

Solution NMR spectroscopy is a well-established tool with unique advantages for structural studies of RNA molecules. However, for large RNA sequences, the NMR resonances often overlap severely. A reliable way to perform resonance assignment and allow further analysis despite spectral crowding is the use of site-specific isotope labeling in sample preparation. While solid-phase oligonucleotide synthesis has several advantages, RNA length and availability of isotope-labeled building blocks are persistent issues. Purely enzymatic methods represent an alternative and have been presented in the literature. In this study, we report on a method in which we exploit the preference of T7 RNA polymerase for nucleotide monophosphates over triphosphates for the 5’ position, which allows 5’-labeling of RNA. Successive ligation to an unlabeled RNA strand generates a site-specifically labeled RNA. We show the successful production of such an RNA sample for NMR studies, report on experimental details and expected yields, and present the surprising finding of a previously hidden set of peaks which reveals conformational exchange in the RNA structure. This study highlights the feasibility of site-specific isotope-labeling of RNA with enzymatic methods.

Agrochemical control of gene expression using evolved split RNA polymerase.

Chemically-inducible gene expression systems are valuable tools for rational control of gene expression both for basic research and biotechnology. However, most chemical inducers are confined to certain groups of organisms. Therefore, dissecting interactions between different organisms could be challenging using existing chemically-inducible systems. We engineered a mandipropamid-induced gene expression system (Mandi-T7) based on evolved split T7 RNAP system. As a proof-of-principle, we induced GFP expression in E. coli cells grown inside plant tissue.

Transcriptional Perturbations of 2,6-Diaminopurine and 2-Aminopurine.

2,6-Diaminopurine (Z) is a naturally occurring adenine (A) analog that bacteriophages employ in place of A in their genetic alphabet. Recent discoveries of biogenesis pathways of Z in bacteriophages have stimulated substantial research interest in this DNA modification. Here, we systematically examined the effects of Z on the efficiency and fidelity of DNA transcription. Our results showed that Z exhibited no mutagenic yet substantial inhibitory effects on transcription mediated by purified T7 RNA polymerase and by human RNA polymerase II in HeLa nuclear extracts and in human cells. A structurally related adenine analog, 2-aminopurine (2AP), strongly blocked T7 RNA polymerase but did not impede human RNA polymerase II in vitro or in human cells, where no mutant transcript could be detected. The lack of mutagenic consequence and the presence of a strong blockage effect of Z on transcription suggest a role of Z in transcriptional regulation. Z is also subjected to removal by transcription-coupled nucleotide-excision repair (TC-NER), but not global-genome NER in human cells. Our findings provide new insight into the effects of Z on transcription and its potential biological functions.

Hypermutation of specific genomic loci of Pseudomonas putida for continuous evolution of target genes.

SummaryThe ability of T7 RNA polymerase (RNAPT7) fusions to cytosine deaminases (CdA) for entering C➔T changes in any DNA segment downstream of a T7 promoter was exploited for hyperdiversification of defined genomic portions of Pseudomonas putida KT2440. To this end, test strains were constructed in which the chromosomally encoded pyrF gene (the prokaryotic homologue of yeast URA3) was flanked by T7 transcription initiation and termination signals and also carried plasmids expressing constitutively either high‐activity (lamprey's) or low‐activity (rat's) CdA‐RNAPT7 fusions. The DNA segment‐specific mutagenic action of these fusions was then tested in strains lacking or not uracil‐DNA glycosylase (UDG), that is ∆ung/ung + variants. The resulting diversification was measured by counting single nucleotide changes in clones resistant to 5‐fluoroorotic acid (5FOA), which otherwise is transformed by wild‐type PyrF into a toxic compound. Although the absence of UDG dramatically increased mutagenic rates with both CdA‐RNAPT7 fusions, the most active variant – pmCDA1 – caused extensive appearance of 5FOA‐resistant colonies in the wild‐type strain not limited to C➔T but including also a range of other changes. Furthermore, the presence/absence of UDG activity swapped cytosine deamination preference between DNA strands. These qualities provided the basis of a robust system for continuous evolution of preset genomic portions of P. putida and beyond.

A facile and robust T7-promoter-based high-expression of heterologous proteins in Bacillus subtilis

To mimic the Escherichia coli T7 protein expression system, we developed a facile T7 promoter-based protein expression system in an industrial microorganism Bacillus subtilis. This system has two parts: a new B. subtilis strain SCK22 and a plasmid pHT7. To construct strain SCK22, the T7 RNA polymerase gene was inserted into the chromosome, and several genes, such as two major protease genes, a spore generation-related gene, and a fermentation foam generation-related gene, were knocked out to facilitate good expression in high-density cell fermentation. The gene of a target protein can be subcloned into plasmid pHT7, where the gene of the target protein was under tight control of the T7 promoter with a ribosome binding site (RBS) sequence of B. subtilis (i.e., AAGGAGG). A few recombinant proteins (i.e., green fluorescent protein, α-glucan phosphorylase, inositol monophosphatase, phosphoglucomutase, and 4-α-glucanotransferase) were expressed with approximately 25–40% expression levels relative to the cellular total proteins estimated by SDS-PAGE by using B. subtilis SCK22/pHT7-derived plasmid. A fed-batch high-cell density fermentation was conducted in a 5-L fermenter, producing up to 4.78 g/L inositol monophosphatase. This expression system has a few advantageous features, such as, wide applicability for recombinant proteins, high protein expression level, easy genetic operation, high transformation efficiency, good genetic stability, and suitability for high-cell density fermentation.Graphical

A study of RNA polymerase‐Template interaction utilizing CRISPR/dCas9 protein

In vitro transcription is now a routine biochemical technique that allows for the synthesis of RNA molecules from a DNA template. This is done utilizing a variety of bacterial and phage RNA polymerases. Transcriptional pausing is a common biological phenomenon, yet the molecular mechanism of pausing is not yet well understood. Bacterial and phage RNA polymerases have been demonstrated to behave differently when they encounter a protein blockade during transcription. The goal of this project is to characterize the transcription complex as it encounters the protein blockade. Characterization of this complex will enable us to better understand the structural and chemical interactions between the polymerase, the DNA template, and the blockade protein. The protein blockade was engineered using the dCas9 protein from the CRISPR system. By using a nuclease deficient Cas9 protein (dCas9), we can create a protein blockade that will not cleave the template The CRISPR system is an adaptive immune system found in Archaea and many Bacteria. dCas9 protein binds guide RNA that is complementary to a target DNA sequence within the transcription template sequence creating a reversible blockade at specific locations in order to study the RNA polymerase interaction. In vitro conditions for T7 RNA polymerase have been optimized, and initial characterization of the complex has been completed. This work will allow us to better understand the mechanism behind a novel, flexible, and reversible transcriptional control system.