Lighting System Research Articles

Evaluation of Lighting and Power Systems At State Vocational School 1 Kramatwatu

Evaluation of the electrical installation of a building is something that needs to be done so that the quality of the electrical installation remains in good condition and reliability. This research aims to evaluate the lighting system. Energy needs are currently playing an increasingly important role in human life, one of which is the problem that arises in the use of energy consumption in the New Classroom Building (RKB) at SMK Negeri 1 Kramatwatu. This research aims to determine the value of energy requirements in the RKB building (IKE, kWh , kVA and Cost Tariff), the RKB building is a building that has 2 floors with a total of 12 classrooms, this building was established at the end of 2023, the RKB building has never had an Energy Audit which is useful for identifying inefficient energy use, this energy audit can reduce energy use in order to increase the level of efficiency. To find out the results with data that has been collected using manual calculations and lighting simulations using DIALux software version 12.1. This RKB building uses energy of 17,154kWh/day, 85,770kWh/week, 343,080kWh/month and 4,322,960kWh/year. 226,925VA/Day, 1,134,625VA/Week, 4,538.5VA/Month and 54,462VA/Year. and customer rates Rp. 19,061;/Day, Rp. 95,308;/week, Rp. 381,234;/Month and Rp. 4,574,808;/Year on consumption of lighting power loads and other power loads.

Putative retina metal/metalloid-binding proteins: molecular functions, biological processes and retina disease associations.

The mammalian retina contains high amounts of metals/metalloid-selenium. Their dyshomeostases are associated with certain retinal diseases. We carried out this bioinformatics study to identify the relationships between putative retinal metal/selenium binding proteins, their molecular functions, and biological processes. Identification of putative mouse metal/selenium binding proteins was based on known binding motifs, domains, patterns, and profiles. Annotations were obtained from Uniprot keywords 'metal binding', 'metal ion co-factors', 'selenium proteins'. Protein functions were estimated by associative frequency with key words in UniProt annotations. The raw data of five mouse proteomics PRIDE datasets (available to date) were downloaded and processed with Mascot against the mouse taxa of Uniprot (SwissProt/Trembl) and MaxQuant (version 1.6.10.43) for qualitative and quantitative datasets, respectively. Clinically relevant variants were evaluated using archives and aggregated information in ClinVar. The 438 proteins common to all the retina proteomics datasets were used to identify over-represented Gene Ontology categories. The putative mouse retinal metal/metalloid binding proteins identified are mainly involved in: (1) metabolic processes (enzymes), (2) homeostasis, (3) transport (vesicle mediated, transmembrane, along microtubules), (4) cellular localization, (5) regulation of signalling and exocytosis, (6) organelle organization, (7) (de)phosphorylation, and (8) complex assembly. Twenty-one proteins were identified as involved in response to light stimulus and/or visual system development. An association of metal ion binding proteins rhodopsin, photoreceptor specific nuclear receptor, calcium binding protein 4 with disease-related mutations in inherited retinal conditions was identified, where the mutations affected an area within or in close proximity to the metal binding site or domain. These findings suggest a functional role for the putative metal/metalloid binding site in retinal proteins in certain retinal disorders.

Study of high-order non-equal probability QAM for visible light communication systems.

In this Letter, we propose and experimentally demonstrate a high-order non-equal probability quadrature amplitude modulation (NEP-QAM) scheme for visible light communication (VLC) systems, where NEP-72QAM is considered as an example. Nonlinear coding is introduced to generate the NEP-18QAM signal in the first quadrant, which is then jointly mapped with the other two bits to obtain the four-quadrant symmetric NEP-72QAM signal. Moreover, a bit-to-symbol labeling scheme is proposed to achieve thorough Gray mapping. The experimental results show that the NEP-72QAM scheme achieves better performance than the traditional 64QAM scheme regardless of whether the light-emitting diode (LED) operates in the linear or nonlinear range. Compared with the probabilistically shaped 72QAM scheme, the available range of the driving peak-to-peak voltage of the NEP-72QAM scheme is only reduced by 20 mV when 0.92 is used as the normalized generalized mutual information threshold, but the complexity is much lower.

When a Stranger Approaches at Night: The Impact of Adaptive Street Lighting on Safety Perception

ABSTRACT Advancements in sensor technology have paved the way for street lighting to evolve into an “intelligent” system, capable of detecting pedestrians’ behaviors and dynamically adjusting its features. Such an adaptive lighting system provides a valuable framework for examining the interplay between lighting attributes and social interactions among pedestrians, a topic that remains less explored. This study examines two critical factors known to influence fear in the dark: encountering an uncivil stranger and street lighting. Utilizing virtual reality (VR), we simulated a scenario in which participants experienced a potential threat from a stranger under eight different lighting conditions in a public parking lot (dynamic vs. static, white vs. yellow, bright vs. dim). We also examined how participants navigated the parking lot after encountering an uncivil stranger, seeking the safest space. The findings of the study suggest that both brighter light and white-colored light led to enhanced safety perception during social encounters with an uncivil pedestrian. However, adaptive lighting that only illuminated the surrounding environment did not have a significant impact on safety perception, as compared to the conventional light that uniformly lit the environment. After encountering the potential threats, the majority of participants (38%) chose to move closer to the building entrance, citing the “well-lit area,” “possible presence of other people,” and “possibility to ask for help” as the main reasons. These findings emphasize the crucial role of both social cues from others and lighting attributes in shaping safety perception.

Design of a Novel Microlens Array and Imaging System for Light Fields.

Light field cameras are unsuitable for further acquisition of high-quality images due to their small depth of field, insufficient spatial resolution, and poor imaging quality. To address these issues, we proposed a novel four-focal-square microlens and light field system. A square aspheric microlens array with four orthogonal focal lengths was designed, in which the aperture of a single lens was 100 μm. The square arrangement improves pixel utilization, the four focal lengths increase the depth of field, and the aspheric improves image quality. The simulations demonstrate pixel utilization rates exceeding 90%, depth-of-field ranges 6.57 times that of a single focal length, and image quality is significantly improved. We have provided a potential solution for improving the depth of field and image quality of the light field imaging system.

The Price of Foods, Beverages, and Diets in Australia: An Updated Systematic Review

Abstract Context The price and affordability of food are priorities for public health and health equity; however, Australia lacks a consistent method to evaluate healthy versus unhealthy diets, creating a gap in routine food price reporting. Objective This review aimed to identify and summarize recent methods used to assess and monitor the price and/or affordability of food and beverages in Australia using a health lens. Data Sources Four academic databases (MEDLINE Complete, Global Health, CINAHL Complete, and Business Source Complete) were searched in English from 2016 to 2022. Relevant gray literature was searched through Google Scholar and government websites. Data Extraction Five reviewers screened titles and abstracts, and full-text screening was conducted by 1 reviewer, with eligibility confirmed by a second reviewer. The quality of studies was assessed using the Joanna Briggs Institute “Checklist for Analytical Cross-Sectional Studies.” Data Analysis Twenty-five eligible studies were identified. Eleven studies used a version of the Healthy Diets Australian Standardized Affordability and Pricing protocol to collect prices for a “healthy” diet modelled on dietary guidelines and an “unhealthy” diet based on a habitual Australian diet. These studies consistently found unhealthy diets to be more expensive than healthy diets. Other identified methods included assessing the price of household diets across healthy baskets (n = 6), store types (n = 5), a planetary health diet (n = 1), packaged foods according to their Health Star Rating (n = 1), a fruit and vegetable basket (n = 1), school canteen foods against a traffic light system (n = 1), and weekly healthy meal plans (n = 1). Healthy diets tended to be less costly than less healthy diets, but both diets were often unaffordable in regional areas, for people on low incomes, and for First Nations peoples. Conclusion Consistent country-wide application of methods for monitoring the price and affordability of foods and diets in Australia is needed—including tailored approaches for priority groups. Systematic Review Registration PROSPERO registration no. CRD42022333531.

Analisis Efektivitas Sistem Kendali Otomatis PJU Berbasis IoT Menggunakan Mikrokontroler ESP32 dengan Metode Regresi Linier

Public street lighting (PJU) is essential infrastructure for nighttime security. This research develops an automatic PJU control system based on IoT using light and motion sensors with an ESP32 microcontroller. The system allows for PJU lamp control via a website, providing high flexibility for users. The ESP32 microcontroller is connected to a PIR sensor to detect motion. When the sensor detects movement, the intensity of the PJU lamps is increased, and when no movement is detected, the light intensity is reduced to save energy. Users can control the PJU lamps from any internet-connected device. Testing results show an increase in energy efficiency, with an average power consumption reduction of 13.77 watts and an efficiency increase of 42.67%. An R-squared value of 0.629 indicates that the model is quite good at explaining the variability in power consumption data. This system can automatically turn on street lights and be monitored in real-time, And hopes to contribute to the development of smarter and more efficient street lighting systems.

Analysis and Evaluation of Artificial Lighting in the Passenger Spaces of a 500 Gt Ro-Ro Ferry

Lighting is an important design criterion for ships, including the ro-ro ferry. The ship’s lighting system must meet certain standards. Therefore, the present study analysed and evaluated the artificial lighting of an Indonesian ro-ro ferry. The analysed ship in the present research was a 500 GT ro-ro ferry named KMP. Takabonerate that operated across the Selayar Islands of Indonesia. The artificial lighting systems in this ship’s three passenger spaces, which are reclining seat room, sofa seat room, and passenger open space, were evaluated and analysed. The main parameter to be investigated was the room illuminance produced by the ship’s lighting system. In order to achieve the study objective, the illuminance in those rooms was calculated using analytical formulas. The calculation results were validated using direct measurements and computer simulation. The direct measurements were conducted using a luxmeter, while computer simulations were performed using DIAlux Evo 10.0 software. With this software, the artificial lighting in the passenger spaces was also simulated and realistically visualized. The research results showed that the illuminance in the reclining seat room and the sofa seat room had met the minimum illuminance value set by the Indonesian National Standard (SNI), American Bureau of Shipping (ABS), and Indonesian Classification Bureau (BKI) standards. For the passenger open space, a re-arrangement of the lighting system was conducted to improve the light distribution so that all space illumination can meet the specified standards.

Additive Manufacturing of Tough Silicone Via Large-Scale, High-Viscosity Vat Photopolymerization

Abstract In this work, a large-scale, high-viscosity vat photopolymerization additive manufacturing system is designed and fabricated to print 3D structures as large as 370 × 300 × 370 mm3 out of high-viscosity, low-reactivity elastomeric resins. A detailed overview is presented of the printer's design and capabilities, including a resin processing sub-system that stores and spreads high-viscosity resin; a roll-to-roll variable tensioning system to mitigate the separation forces after printing each layer; and a light patterning system that generates high-intensity light patterns across an area of 370 × 300 mm2 with a resolution of 3840 × 4320 pixels. The ability to print with both high-viscosity and low-reactivity resins and resins that require high-intensity light enables additive manufacturing of new classes of materials that could not be printed previously using vat photopolymerization techniques. These materials include highly reinforced silica nanoparticle composites, high-molecular-weight polymers such as silicones and acrylate or methacrylate resins, and low-reactivity resins such as photocurable platinum-catalyzed liquid silicone rubber.

Exploring the impact of lighting sources on walking behavior in obstructed walkways among older adults

The pandemic has reinforced older adults' reliance on their homes and the concept of “aging in place”. Changes like reduced physical strength and cognitive deficit, however, have heightened the challenge of simple tasks like obstacle crossing among older adults, let alone when older adults cannot perceive the surroundings well during the nighttime. The study is, therefore, to evaluate the impact of lighting on older adults' obstacle-crossing behavior during the nighttime. Twenty-seven older adults (81 ± 6 yrs., 171 ± 12 cm, 75 ± 20 kg, 14 females) were recruited. Participants were asked to cross over the obstacle in a dark residential environment under point or line light. We found that the line light tended to (1) induce more external rotation of the trailing hip (p = 0.037) and more internal rotation of the leading ankle (p < 0.001) at leading leg liftoff; and (2) result in a more upright and erect posture during stance phase (less hip flexion, p = 0.006) and swing phase of the trailing leg (reduced pelvic flexion, p = 0.038). Postural changes induced by line light demonstrated improved body control, highlighting the influence of spatial information (horizontal & vertical directions) on crossing behavior in dark environments. The findings can provide additional evidence for the design of light systems in both retirement communities and individual homes. This is particularly important when designing built environments for the aging population, in cases where the surroundings may pose challenges such as obstructed walking, and other complex floor conditions.

Deep encoder-decoder networks for belt longitudinal tear detection

The belt conveyor is susceptible to longitudinal tearing, which poses a serious threat to the safety of coal mines. Traditional methods for detecting longitudinal tears have limitations such as poor image quality, limited applicability, and high hardware costs. An improved encoder-decoder network was proposed to solve the longitudinal tear detection problem. This method utilizes a line structured light system for image acquisition. The input images are downscaled using a sorting algorithm to extract the information of pixels with high grayscale values as the input feature map for the neural network. The reduced-dimensional encoder-decoder network then semantically segments the input feature map, and the resulting pixel segmentation is mapped to the location of the longitudinal tear. Finally, the position and length of the tear are calculated by back-projecting the semantic segmentation result to the world coordinate system. Experimental results demonstrate that this method effectively reduces hardware resource consumption and improves detection speed. The DICE and MIOU scores for the improved network are 97.69% and 95.47%, respectively, while the recall and precision for improved detection are 96.60% and 95.67%, respectively. Therefore, this method can successfully monitor longitudinal tear failures and ensure the safety of transportation.

BiOBr/FeMoO4 composite achieves oxygen vacancy concentration adjustment to promote persulfate activation degradation of organic pollutants in saline water

The investigation about the mechanism of crystal plane regulation on the generation of oxygen vacancies remains a challenge. In this paper, BiOBr/FeMoO4 composites were synthesized by precise control of crystal plane growth, and it exhibited the enhanced concentration of oxygen vacancies due to lower formation energy of oxygen vacancies. The composite performs higher photo-Fenton-like ability for degrading oxytetracycline hydrochloride (OTC). Structural analyses and theoretical calculations reveal that crystal plane regulation induces significant changes in oxygen vacancy concentration. The BiOBr/FeMoO4/peroxydisulphate (PDS) /light system, which dominated by the non-radical pathway, degraded 96.8 % ± 1.0 % of OTC within 30 min. The activation mechanism of the system and the degradation pathway of OTC were elucidated. The intermediates in the degradation process of OTC were evaluated using liquid chromatograph-mass spectrometer (LC-MS), toxicity evaluation software tool (T.E.S.T) and soybean germination experiments. This work offers novel insights into the pivotal role of crystal plane directional regulation in the quantitative generation of oxygen vacancies.

Comprehensive Assessment of Context-Adaptive Street Lighting: Technical Aspects, Economic Insights, and Measurements from Large-Scale, Long-Term Implementations.

This paper addresses the growing importance of efficient street lighting management, driven by rising electricity costs and the need for municipalities to implement cost-effective solutions. Central to this study is the UNI 11248 Italian regulation, which extends the European EN 13201-1 standard introduced in 2016. These standards provide guidelines for designing, installing, operating, and maintaining lighting systems in pedestrian and vehicular traffic areas. Specifically, the UNI 11248 standard introduces the possibility to dynamically adjust light intensity through two alternative operating modes: (a) Traffic Adaptive Installation (TAI), which dims the light based solely on real-time traffic flow measurements; and (b) Full Adaptive Installation (FAI), which, in addition to traffic measurements, also requires evaluating road surface luminance and meteorological conditions. In this paper, we first present the general architecture and operation of an FAI-enabled lighting infrastructure, which relies on environmental sensors and a heterogeneous wireless communication network to connect intelligent, remotely controlled streetlights. Subsequently, we examine large-scale, in-field FAI infrastructures deployed in Vietnam and Italy as case studies, providing substantial measurement data. The paper offers insights into the measured energy consumption of these infrastructures, comparing them to that of conventional light-control strategies used in traditional installations. The measurements demonstrate the superiority of FAI as the most efficient solution.

Advanced Multichannel Lighting Control Systems in Heritage Environments: Case Study of the Cathedral of Seville

The appropriate preservation and color rendering of paintings and art pieces are a pending subject in architectural heritage, since, in most of the cases, lighting systems are not really focused on the conservation and suitable perception of these heritage resources, due to the limitations of standard LED lamps and lighting configurations. In this context, a multichannel luminaire system is proposed in the case study of the Cathedral of Seville, providing a variable and rich spectral distribution, which allows an excellent color perception linked to the daylight conditions, while the short-wavelength light is minimized in order to reduce photodegradation. Two scenarios are addressed: Museum of the Cathedral and Evangelist Chapel. The multichannel luminaire system is tested by means of subjective surveys and objective procedures (Farnswoth-Munsell and Natural Color System tests). The results show that the proposed spectral distribution of the multichannel system provides a better color discrimination in comparison with typical lighting systems, as well as a better preservation, defining a suitable lighting technology for architectural heritage. The novelty of this study lies in the multi-parameter approach, taking care of color rendering while photodegradation is minimized.

Inactivation of Hepatitis A Virus and Feline Calicivirus on Model Food Contact Surfaces by Ultraviolet Light (UV-C) Systems.

Food contact surfaces can harbor and transmit pathogens leading to outbreaks. Decontamination strategies that are user- and environmentally-friendly without toxic by-product formation are needed. Novel UV-C light-emitting diode (LED) technologies are being explored to deliver the required dose to inactivate viruses in food-processing environments. The objective of this study was to compare the effects of 279 nm UV-C LED to 254 nm UV-C against hepatitis A virus (HAV) and feline calicivirus (FCV, a cultivable human norovirus surrogate) on stainless-steel, ceramic, and glass surfaces. Viruses were surface spread on sterile stainless-steel or ceramic coupons (100 μL on 2 × 2 cm2), or glass discs (50 μL on 1 × 1 cm2), air-dried, and UV-C-treated for up to 3.75 min (surface dose = 0-49.2 mJ/cm2 for HAV and 0-24.6 mJ/cm2 for FCV). Each triplicate treatment was assayed in duplicate, and data were statistically analyzed. The D10-values for HAV treated with UV-C at 254 nm on stainless-steel, ceramic, and glass were 9.48 ± 0.34, 14.53 ± 2.52, and 6.91 ± 1.93 mJ/cm2, while with UV-C LED at 279 nm were 19.53 ± 2.45, 26.05 ± 0.60, and 8.77 ± 2.08 mJ/cm2, respectively. The D10-values for FCV treated with UV-C at 254 nm on stainless-steel, ceramic, and glass were 3.65 ± 0.06, 6.25 ± 1.90, and 4.69 ± 0.03 mJ/cm2, while with UV-C LED at 279 nm were 7.097 ± 2.11, 8.31 ± 2.12, and 7.88 ± 0.86 mJ/cm2, respectively. Higher 279 nm UV-C doses were needed to inactivate HAV and FCV compared to 254 nm UV-C on the tested surfaces. Novel UV-C LED systems using appropriate doses show promise to inactivate foodborne viruses on food contact surfaces.

Soft Magnetoelastic Tactile Multi-Sensors with Energy-Absorbing Properties for Self-Powered Human-Machine Interfaces.

Tactile sensors play a key role in human-machine interfaces (HMIs) for augmented and virtual reality, point-of-care devices, and human-robot collaboration, which show the promise of revolutionizing our ways of life. Here, we present a sensor (EMTS) that utilizes the magnetoelastic effect in a soft metamaterial to convert mechanical pressure into electrical signals. With this unique mechanism, the proposed EMTS simultaneously possesses self-powering, waterproof, and compliant features. The soft metamaterial is essentially a porous magnetoelastomer structure designed based on the Fourier series expansion, which allows for programmable mechanical response and sensing performance of the EMTS. Fabricated by simple 3D-printed molds, the EMTS also holds potential for low-cost production. Particularly, the porous magnetoelastomer structure comes with selectable buckling instabilities that can significantly enhance biomechanical-to-electrical energy conversion. Also, with the embedded magnetic microparticles, the energy-absorbing performance of the sensor is greatly improved, which is highly beneficial to HMIs. To pursue practical applications, the EMTSs are further integrated with two systems as control and perception modules. It is demonstrated that the EMTS is able to identify different hand gestures to control a lighting system even in a high-humidity environment. Also, the EMTS stands out for its superior capability of simultaneous impact perception and energy absorption in drop tests. Overall, with its compelling array of features, the presented EMTS gives impetus to multi-sensing technology and practically enables a variety of HMI applications.

The Maintenance Factor as a Necessary Parameter for Sustainable Artificial Lighting in Engineering Production—A Software Approach

The presented article addresses the issue of the maintenance factor, which forms a part of the design variables in artificial lighting within engineering practices from a sustainability perspective. The maintenance factor was monitored using two simulation tools—Dialux, version 5.12.0.5527 and Relux, version 2024.2.8.0. In a production hall, inadequate lighting was identified with a value below 300 lx, prompting a redesign of the lighting system. The overall methodology of the Ergonomic Rationalization Sequence was expanded in the “Design of Lighting System” phase to include the determination of the maintenance factor as a necessary parameter for sustainability, which was subsequently verified in a virtual environment using two options in a practical study. According to the in situ measurements, the virtual environments of the production hall were created for both software, in which four alternatives for the lighting system were developed. The illuminance values met the normative requirements in each alternative; however, the first two (illuminance values 1000 lx–1200 lx) were predicted to have long-term high-energy consumption. In alternatives 3 and 4, the number of luminaires was therefore reduced from 6 pieces to 4, with a total illuminance in the range of 680 lx–780 lx. The determination of the variations in the methods for establishing the maintenance factor identified a deviation of 5%, which, indicating the changes in illuminance values, can be considered as the occurrence of a gross error in lighting design.

Artificial intelligence can regulate light and climate systems to reduce energy use in plant factories and support sustainable food production.

Plant factories with artificial lighting (PFALs) can boost food production per unit area but require resources such as carbon dioxide and energy to maintain optimal plant growth conditions. Here we use computational modelling and artificial intelligence (AI) to examine plant-environment interactions across ten diverse global locations with distinct climates. AI reduces energy use by optimizing lighting and climate regulation systems, with energy use in PFALs ranging from 6.42 kWh kg-1 in cooler climates to 7.26 kWh kg-1 in warmer climates, compared to 9.5-10.5 kWh kg-1 in PFALs using existing, non-AI-based technology. Outdoor temperatures between 0 °C and 25 °C favour ventilation-related energy use reduction, with outdoor humidity showing no clear pattern or effect on energy use. Ventilation-related energy savings negatively impact other resource utilization such as carbon dioxide use. AI can substantially enhance energy savings in PFALs and support sustainable food production.

WP7.9 - Evaluation of outcomes of early laparoscopic cholecystectomy for acute gallstone disease using Traffic Light Booking system

Abstract Introduction Delayed cholecystectomy leads to recurrent admissions with potential increased preoperative, operative, and postoperative complications. Aim To evaluate the outcomes of early laparoscopic cholecystectomy using traffic light booking system. Methods A quality improvement early gallbladder service was designed using the weighted scores of patients’ demographics, BMI, comorbidities, LFTs, imaging findings, confirmed diagnosis and associated gallstone complications. The scores were stratified into traffic light system colours of green (0-3), amber (4-6) and red (&amp;gt;7) to predict the operative difficulty and allocated operative time. Early cholecystectomy was performed within 6 weeks of the onset of symptoms. Operative difficulty grading use was by Nassar et al. Prospectively data was analysed using SPSS to present the outcomes. Results 207 patients had early cholecystectomy from February 2022 to January 2024. Median age was 50.5 years and 71.5% were females. Diagnoses were 60 biliary colic, 102 acute cholecystitis, 41 pancreatitis and 4 cholecystitis with biliary obstruction. Traffic light scores were 114 green, 76 amber and 17 red while operative difficulty grading was 44 mild, 73 moderate, 54 severe and 36 extreme difficulties. Median time to surgery was 21 (21-42) days and median operative time was 75 (25-205) minutes. 13.5% of the patients were operated at the index admission, 67.1% as day cases, 20.3% stayed overnight and 12.6% as inpatient stays. None were converted to open but four procedures were abandoned. Complication and readmission rates were 4.8% and 5.3% respectively with one patient returning to theatre. Conclusion Early laparoscopic cholecystectomy service can be safely delivered with the majority done as day cases.

ThP8.3 - From red coded report to Fistula salvage in 2 weeks

Abstract Aim Fistulas and grafts are life line for patients with End stage renal disease (ESRD). However, they frequently fail, and early intervention is recommended to prevent loss of access. The present study aimed to establish waiting times between identification of significant stenosis/thrombus on duplex scan to intervention. Methods In this study we looked at all red coded reports in 2022 to establish their waiting time from red report to a radiological or surgical intervention. We have a traffic light system where patients with fistulas with no stenosis and good volume flow (VF) over &amp;gt;600ml/min are labelled green, labelled amber when there is a &amp;lt;50% stenosis or minor thrombus with VF still around/above 600 ml/min. Red where there is significant stenosis/thrombus. Results 291 patients were identified, 178 patients with significant &amp;gt;50% stenosis/thrombus in fistula, 82 patients with occluded fistulas, 15 patients with significant inflow +/-outflow stenosis/occlusion, 16 patients with e.g. very high VF fistulas/pseudoaneurysms/small vein size +/- &amp;lt;600ml/min VF (maturing fistulas). As a result of red report, 9% of patients received a new fistula and 57% of patients received an intervention to salvage their existing fistula. Interventions included 112 fistuloplasty/venoplasty, 43 surgical thromb ectomy procedures. 58% of patients received an intervention within the first 2 weeks with 3.6% of patients receiving intervention on the same day as red coded report. 34% of patents however did not receive any intervention. Conclusion There is room for further improvement to salvage more fistulas, though 60% of patients did have an intervention within 2 weeks.