Synthesis Of Copper Nanoparticles Research Articles

Green synthesis and characterization of silver and copper nanoparticles and their use as an effective adsorbent for chromium removal and recovery from wastewater.

Chromium (Cr) is one of the hazardous heavy metals that is naturally carcinogenic and causes various health problems. Metallic nanoparticles such as silver and copper nanoparticles (Ag NPs and Cu NPs) have gained great attention because of their unique chemical, physical, and biological attributes, serving diverse and significant role in various useful and sustainable applications. In the present study, both of these NPs were synthesized by green method in which Azadirachta indica plant extract was used. These nanoparticles were characterized by using advanced instrumental techniques such as Fourier transmission infrared (FTIR), X-ray diffraction (XRD), scanning electron microscope attached with energy-dispersive spectroscopy (SEM-EDS), and elemental mapping. These environmentally friendly nanoparticles were utilized for the batch removal of Cr from the wastewater. For analysis of adsorption behaviour, a range of kinetic isotherm models (Freundlich, Temkin, Dubinin, and Langmuir) and kinetic models (pseudo-first-order and pseudo-second-order) were used for the Cu-NPs and Ag-NPs. Cu NPs exhibited the highest Cr removal efficiency (96%) within a contact time of 10-15 min, closely followed by Ag NPs which achieved a removal efficiency of 94% under the similar conditions. These optimal outcomes were observed at a sorbent dose of 0.5 g/L for Ag NPs and 0.7 g/L for Cu NPs. After effectively capturing Cr using these nanoparticles, the sorbates were examined through SEM-EDX analysis to observe how much Cr metal was attached to the nanoparticles, potentially for future use. The analysis found that Ag-NPs captured 18% of Cr, while Cu-NPs captured 12% from the aqueous solution. More precise experimental conditions are needed for higher Cr removal from wastewater and determination of the best conditions for industrial-level Cr reuse. Although nanomaterial exhibit high efficiency and selectivity for Cr removal and recovery from wastewater, more research is necessary to optimize their synthesis and performance for industrial-scale applications and develop efficient methods for Cr removal and recovery.

Production of Copper Nanoparticles by Aspergillus niger and Evaluation of their Biomedical Applications

Nanotechnology is a well advanced area and different types of nanoparticles are now produced. The most revolutionary topic of the twenty-first century is nanotechnology. Recently, metallic nanoparticles (NPs) have gained a lot of attention. In this study a straightforward, safe, and economical method is used for synthesizing copper nanoparticles (CuNPs) by using cell free filtrate of Aspergillus niger. Fungi secretes enormous amount of enzymes which act as reducing as well stabilizing agents. Synthesized CuNPs were characterized by different techniques. Ultraviolet (UV)-visible spectrophotometer showed a characteristic peak at 380nm, Dynamic Light Scattering (DLS) analysis indicated that CuNPs have average size of 570nm with 0.480 PDI. SEM (Scanning Electron Microscopy) revealed CuNPs are of cubic shape. As per FTIR (Fourier Transform Infrared Analysis) two functional groups i.e., -O-H- and C=C- on the surface of CuNPs. Genetic analysis of Aspergillus niger revealed the presence of nitrate reductase enzyme that may involve in reduction of metal into NPs. Furthermore, CuNPs showed significant antibacterial action against Escherichia coli, Bacillus subtilis, Staphylococcus aureus, and Klebsiella pneumoniae with 17mm, 20mm, 17mm and 20mm respectively. CuNPs also showed antioxidant potential with 59.41µg/ml.
 Fungi secretes valuable enzymes with inherent ability to reduce metal ions into NPs. This reduced the cost of NPs synthesis and also synthesized NPs exhibit greater biomedical applications.

Green Synthesis of Copper Nanoparticles Using Citrullus colocynthis Peel Extract and Antibacterial Activity for Biomedical Applications

A novel and green method was developed to synthesise copper nanoparticles (CuNPs) using Citrullus colocynthis peel extract as a sustainable source. The study is the first to utilise this extract for the environmentally safe and economically efficient synthesis of CuNPs. The impact of experimental parameters, including the copper sulfate concentration, extract volume, reaction time, and temperature, on the synthetic procedure was thoroughly investigated. The as-prepared CuNPs were characterised using HRTEM, FESEM, XRD, EDX, UV–vis spectrophotometry, and FTIR spectroscopy. The CuNPs exhibited a spherical morphology with an average particle size of 9 nm, and the calculated d-spacing values were measured at 0.257 nm. Furthermore, the XRD analysis revealed characteristic diffraction peaks at 2θ angles of 44.56°, 56.1°, and 71.4°. The UV–Vis absorption spectra of the CuNPs displayed a surface plasmon resonance (SPR) peak at 335 nm, corresponding to an energy band gap of 3.47 eV. Further, the FTIR spectra confirmed the interaction between copper and the biomolecules present in the extract, providing evidence of the significant role played by organic compounds in the capping process. The as-prepared CuNPs exhibited strong antibacterial activity against both gram-negative (P. aeruginosa and E. coli) and gram-positive (S. aureus and S. epidermidis) bacteria.

Moringa oleifera seed based green synthesis of copper nanoparticles: Characterization, environmental remediation and antimicrobial activity

Textile dyes and heavy metals like hexavalent chromium [Cr(VI)] are considered major water pollutants. In addition, microbial contamination also seriously threatens potable water availability. The present study used Moringa oleifera seed aqueous extract to synthesize copper nanoparticles (MOS-CuNPs). MOS-CuNPs were characterized by various spectroscopy and microscopic techniques. MOS-CuNPs were shown to be effectual at removal of Cr(VI). The initial concentration of Cr(VI), contact time, pH, and temperature all impacted the removal of Cr(VI) by different concentrations of MOS-CuNPs. At low concentrations of MOS-CuNPs (0.3 mg/ml) pseudo-first order and high concentrations of MOS-CuNPs (0.4 and 0.5 mg/ml), pseudo-second order kinetics were obeyed. Thermodynamic analysis revealed that Cr(VI) was removed spontaneously, and the reaction was exothermic. In adsorption isotherm, equilibrium data followed Langmuir equation for Cr(VI) adsorption by MOS-CuNPs and maximum uptake capacity calculated was 38.6 mg/g. MOS-CuNPs efficiently removed cationic (rhodamine B, malachite green and methylene blue and) and anionic (congo red, titan yellow and methyl orange) dyes within 10 min of contact time. Further MOS-CuNPs showed antimicrobial activity against human pathogenic bacteria and fungi. Altogether, MOS-CuNPs could be used for environmental (water treatment) and biological applications.

Copper bioreduction and nanoparticle synthesis by an enrichment culture from a former copper mine.

Microorganisms can facilitate the reduction of Cu2+ , altering its speciation and mobility in environmental systems and producing Cu-based nanoparticles with useful catalytic properties. However, only a few model organisms have been studied in relation to Cu2+ bioreduction and little work has been carried out on microbes from Cu-contaminated environments. This study aimed to enrich for Cu-resistant microbes from a Cu-contaminated soil and explore their potential to facilitate Cu2+ reduction and biomineralisation from solution. We show that an enrichment grown in a Cu-amended medium, dominated by species closely related to Geothrix fermentans, Azospira restricta and Cellulomonas oligotrophica, can reduce Cu2+ with subsequent precipitation of Cu nanoparticles. Characterisation of the nanoparticles with (scanning) transmission electron microscopy, energy-dispersive x-ray spectroscopy and electron energy loss spectroscopy supports the presence of both metallic Cu(0) and S-rich Cu(I) nanoparticles. This study provides new insights into the diversity of microorganisms capable of facilitating copper reduction and highlights the potential for the formation of distinct nanoparticle phases resulting from bioreduction or biomineralisation reactions. The implications of these findings for the biogeochemical cycling of copper and the potential biotechnological synthesis of commercially useful copper nanoparticles are discussed.

Green synthesis of Piper nigrum copper-based nanoparticles: in silico study and ADMET analysis to assess their antioxidant, antibacterial, and cytotoxic effects.

Nanobiotechnology is a popular branch of science that is gaining interest among scientists and researchers as it allows for the green manufacturing of nanoparticles by employing plants as reducing agents. This method is safe, cheap, reproducible, and eco-friendly. In this study, the therapeutic property of Piper nigrum fruit was mixed with the antibacterial activity of metallic copper to produce copper nanoparticles. The synthesis of copper nanoparticles was indicated by a color change from brown to blue. Physical characterization of Piper nigrum copper nanoparticles (PN-CuNPs) was performed using UV-vis spectroscopy, FT-IR, SEM, EDX, XRD, and Zeta analyzer. PN-CuNPs exhibited potential antioxidant, antibacterial, and cytotoxic activities. PN-CuNPs have shown concentration-dependent, enhanced free radical scavenging activity, reaching maximum values of 92%, 90%, and 86% with DPPH, H2O2, and PMA tests, respectively. The antibacterial zone of inhibition of PN-CuNPs was the highest against Staphylococcus aureus (23mm) and the lowest against Escherichia coli (10mm). PN-CuNPs showed 80% in vitro cytotoxicity against MCF-7 breast cancer cell lines. Furthermore, more than 50 components of Piper nigrum extract were selected and subjected to in silico molecular docking using the C-Docker protocol in the binding pockets of glutathione reductase, E. coli DNA gyrase topoisomerase II, and epidermal growth factor receptor (EGFR) tyrosine to discover their druggability. Pipercyclobutanamide A (26), pipernigramide F (32), and pipernigramide G (33) scored the highest Gibbs free energy at 50.489, 51.9306, and 58.615kcal/mol, respectively. The ADMET/TOPKAT analysis confirmed the favorable pharmacokinetics, pharmacodynamics, and toxicity profiles of the three promising compounds. The present in silico analysis helps us to understand the possible mechanisms behind the antioxidant, antibacterial, and cytotoxic activities of CuNPs and recommends them as implicit inhibitors of selected proteins.

Green synthesis assisted copper nanoparticles using Aegle marmelos leaves extract: Physical, optical and antimicrobial properties.

In the present report, Aegle marmelos leaf powder is used for the synthesis of copper nanoparticles using a simple and cost-effective method. Aegle marmelos leaves have a variety of medicinal uses, including the treatment of diarrhoea, constipation, diabetes, cholera, skin diseases, earaches, blood purification, heart problems, and so on. The plant biomolecules induce the reduction of Cu2+ ions to CuNPs and also act as a capping and stabilising agent. The formation of CuNPs was confirmed by the photoluminescence (PL) excitation and emission spectra using a Shimadzu RF-5301 PC Spectro-fluorophotometer and the absorbance spectra of a UV visible spectrophotometer at different stages during the synthesis process. In addition, other properties of synthesised CuNPs were also investigated using X-ray Diffraction (XRD), Fourier Transform Infrared (FT-IR), and Transmission Electron Microscope (TEM) techniques. The average size of the synthesised Cu nanoparticles is in the range of 20-40 nm. Further, the synthesised nanoparticles were also considered for an antimicrobial study against Gram-positive Staphylococcus aureus, Proteus, and Gram-negative Escherichia coli and Salmonella spp. by using the Agar well diffusion method. The zone of inhibition against Gram-positive bacteria is greater than the zone of inhibition against Gram-negative bacteria. This investigation's results suggested that synthesised nanoparticles are promising nanomaterials that can be used as antimicrobial agents.

A highly selective sensor based on p-tetranitrocalix[4]arene-capped copper nanoparticles for colorimetric and bare-eye detection of cyclophosphamide.

In the current study, one of the outstanding facile and simple protocols is proposed for the synthesis of copper nanoparticles (CuNPs) using NaBH4 as a reducing agent and p-tetranitrocalix[4]arene (p-TNC4) as a capping agent. According to our knowledge, no such technique is available in the literature for colorimetric detection of cyclophosphamide (CPA) using CuNPs at the trace level. The well-organized synthesis was confirmed via advanced spectroscopic techniques. The crystallite size, shape, phase purity, and morphological characteristics were determined via XRD, AFM, FT-IR, and UV-visible spectroscopy. At the optimal conditions for CPA detection, the sensor reveals an excellent sensitivity, selectivity, as well as stability with LOD and LOQ 20nM and 60nM, respectively. However, the proposed sensor showed excellent potential and selectivity for the sensing of colorimetric detection of CPA that can be effectively applied to real blood serum samples. The proposed approach is better suited as compared to reported protocols in terms of handling, simplicity, economic, energy consumption, reproducibility, and excellent performance in a very short time.

Eco-friendly green synthesis of copper nanoparticles from Tinospora cordifolia leaves: optical properties with biological evaluation of anti-microbial, anti-inflammatory and anti-oxidant applications

ABSTRACT The increased use of medicinal plants has raised questions regarding their safety, efficacy, and utility. Since a result, a thorough understanding of plant phytochemical components is essential, since this information will be useful in the development of innovative therapeutic medications. Copper nanoparticles (CuNPs) have received a lot of interest due to their numerous applications. The physical and chemical features of CuNPs influence their uses. In the current study, CuNPs were synthesised utilising the chemical reduction process, with Tinospora cordifolia extract serving as a reducing agent due to their high phenolic and flavonoid content and their antibacterial and anti-inflammatory properties were also assessed. The majority of the absorption peaks found in the T. cordifolia leaves extract can also be found in the FT-IR spectrum of CuNPs, often at the same locations or with just little variations in the peak’s location and intensity. Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM) found that the particles were generally spherical, with an average particle size of 15 to 70 nm. Their potential as anti-bacterial and antifungal drugs was demonstrated by the antimicrobial activity, they exhibited against S. aureus (18 mm), L. bacillus (22 mm), S. mutans (24 mm), and C. albicans (15 mm). Studies on the anti-inflammatory properties of biologically produced Cu NPs were determined.

Dillenia indica bark extract mediated bio-fabrication of copper nanoparticles: characterisation, antioxidant and anticancer activity in vitro

Dillenia indica is a medicinal plant used in the indigenous system of medicine for plethora of diseases. In this study, the efficacy of ethanolic bark extract of Dillenia indica was investigated for green synthesis of copper nanoparticles (CuNPs). Obtained CuNPs were crystalline, spherical in shape within a size range of 20.87–45.73 nm, well dispersed showing strong negative zeta potential value (−41.8 mV) as analysed by XRD, TEM, FESEM and particle size analyser. The elemental composition of CuNPs was examined through EDX spectrum followed by field map analysis. FTIR spectra showed the presence of active biomolecules responsible for reduction of copper ions as well as for surface functionalisation of CuNPs. Synthesised CuNPs showed marked free radical scavenging efficacy at IC50 of 37.2 µg/mL. MTT assay in CuNPs treated A549 and MCF-7 cancer cell lines for 24 and 48 h showed substantial decrease of cell viability with increase in concentration. Further, morphological alterations like cell shrinkage, nuclear fragmentation and blebbing were remarkably observed in CuNPs treated both the cell lines as assayed through AO/EtBr and DAPI staining methods. Thus, D. indica bark extract-mediated CuNPs were potential free radical scavengers and effective cytotoxic against A549 and MCF-7 cancer cell lines.

Hippophae rhamnoides L. (sea buckthorn) mediated green synthesis of copper nanoparticles and their application in anticancer activity.

Green synthesis of nanoparticles has drawn huge attention in the last decade due to their eco-friendly, biocompatible nature. Phyto-assisted synthesis of metallic nanoparticles is widespread in the field of nanomedicine, especially for antimicrobial and anticancer activity. Here in the present research work, investigators have used the stem extract of the Himalayan plant Hippophae rhamnoides L, for the synthesis of copper nanoparticles (CuNPs). The synthesized of CuNPs were analyzed by using sophisticated instruments, i.e., Fourier transform infrared spectroscopy (FTIR), UV-Vis spectroscopy, X-ray diffraction (XRD), high-performance liquid chromatography (HPLC), and scanning electron microscope (SEM). The size of the synthesized CuNPs was varying from 38nm to 94nm which were mainly spherical in shape. Further, the potential of the synthesized CuNPs was evaluated as an anticancer agent on the Hela cell lines, by performing an MTT assay. In the MTT assay, a concentration-dependent activity of CuNPs demonstrated the lower cell viability at 100μg/mL and IC50 value at 48μg/mL of HeLa cancer cell lines. In addition to this, apoptosis activity was evaluated by reactive oxygen species (ROS), DAPI (4',6-diamidino-2-phenylindole) staining, Annexin V, and Propidium iodide (PI) staining, wherein the maximum ROS production was at a dose of 100µg per mL of CuNPs with a higher intensity of green fluorescence. In both DAPI and PI staining, maximum nuclear condensation was observed with 100μg/mL of CuNPs against HeLa cell lines.

Ecofriendly synthesis and nematicidal application of copper nanoparticles fabricated from Bacillus subtilis AM18, against root-knot nematode of cucumber

Ecofriendly synthesis and nematicidal application of copper nanoparticles fabricated from Bacillus subtilis AM18, against root-knot nematode of cucumber

Synthesis of carbon-encapsulated copper nanoparticles by the electrical explosion of wire method

The synthesis of carbon-encapsulated copper nanoparticles (Cu&C NPs) by the high-productive method of the electrical explosion of wire (EEW) is presented. Copper wire was evaporated by high-energy electrical current pulses. Evaporation of Cu and the consequent condensation of spherical nanoparticles took place in argon with the controlled addition of butane, which provided encapsulation of copper nanoparticles in carbon shells. Carbon was deposited in the form of several graphite layers, which completely covered the surface. The encapsulation diminished the agglomeration of carbon-encapsulated copper nanoparticles (Cu@C NPs) during their condensation and substantially diminished their average diameter. Upon the deposition of about 4 % of carbon, the average diameter of nanoparticles decreased more than three-fold – from 130 to about 40 nm. Simultaneously, the specific surface area of Cu@C NPs increased from 7 to 35 m2/g. The deposited dense and gas tight carbon shells protected the surface of particles from oxidation. It prevented the self-ignition of as-synthesized nanoparticles at the exposure to ambient air and provided stability to oxidation during long-term storage as well.

A current Research on the Green Synthesis of Copper Nanoparticles from Herbal Extract

The study aims to find out the effectiveness of the combination of citral and curcumin as antifungal compounds. Lemongrass (Cymbopogon citratus) is a valuable family of grass known due to its flavoring, medicinal, and fragrance application. Haldi (Turmeric) scientifically known as Curcuma longa belongs to familthey Zingiberaceae. Its polyphenolic compound curcumin has been showing a variety of antifungal investigations due to extensive traditional uses and very low side effects.Turmeric has beenutilized in traditional medicine for various diseases counting diabetes, hepatitis, hemorrhoids, hysteria, indigestion, skin disease, inflammation, anorexia, hepatic disorders, cough, and sinusitis. In this formulation substudy combination of two bioactive oils is considered to form an effective antifungal spray preparation. The spray preparation is helpful to achieve fast absorption of the drugs through the transdermal way of drug administration. The effectiveness and activity rate of spray preparation is more beneficial. Lemongrass oil and curcumin are dissolved in ethanol to form a stable, safe, and effective spray formulation.

Synthesis and Characterization of Copper Nanoparticles utilising Pomegranate Peel Extract and Its Antibacterial activity

Synthesis and Characterization of Copper Nanoparticles utilising Pomegranate Peel Extract and Its Antibacterial activity

Biosynthesis and Characterization of Copper Nanoparticles Using a Bioflocculant Produced by a Yeast Pichia kudriavzevii Isolated from Kombucha Tea SCOBY

Over recent years, the ‘green’ chemistry approach to synthesizing nanoparticles has made significant developments. Because of their unique features, nanoparticles have received a lot of attention. The use of a bioflocculant to promote the environmentally friendly synthesis of copper nanoparticles is described in this paper. Copper nanoparticles were biosynthesized using bioflocculant which was produced from a yeast, Pichia kudriavzevii. The chemical reduction approach was used to synthesize copper nanoparticles (CuNPs) using a bioflocculant as a capping agent. Characterization of the as-synthesized copper nanoparticles was conducted using Fourier transform infrared (FT-IR) spectroscopy, UV-visible spectroscopy, X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), and energy dispersive X-ray (EDX). The FT-IR spectra revealed characteristic peaks at 3267, 2956, 1656, 1059, and 511 cm−1 for the bioflocculant, while for the bioflocculant passivated CuNPs, the characteristic peaks were at 3482 (-OH), 3261, 1640, 1059, 580, and 519 cm−1 (Cu-O). These peaks revealed that functional groups such as hydroxyls, amines, and copper oxide bonds were present. The UV-Vis analysis showed surface plasmon resonance (SPR) at an absorbance range of 500–600 nm, with peak maxima at 555 and 575 nm for the as-synthesized CuNPs. The XRD pattern revealed planes such as (200) and (220) at 2θ = 43 and 52°, and the particle size (30 nm) was determined by the Debye–Scherrer equation. The transmission electron microscopy analysis revealed a spherical-shaped particle with an average size of 20 nm. The EDX analysis of the as-synthesized CuNPs revealed the presence of the element Cu, which was not present in the EDX image of the bioflocculant used in the synthesis of the CuNPs; this indicated the success of biosynthesis.

The effect of precursor concentration on the crystallinity synchronization of synthesized copper nanoparticles

Highly crystalline copper nanoparticles are formed with Chemical Reduction Method (CRM) by the application of an effective capping agent and changing the precursor concentration. In this study, copper sulphate pentahydrate is used as a precursor which is reduced by ascorbic acid. The synthesized nanoparticles are designated as P, Q and R. These are systematically characterized by X-ray Diffraction (XRD), UV–Visible Spectroscopy (UV), Differential Scanning Calorimetry (DSC), Thermo-gravimetric Analysis (TGA), Transmission Electron Microscope (TEM) coupled with Energy Dispersive X-ray Spectroscopy (EDS). XRD ensured that the crystalline phase gradually changes from 79% to 96% with the change in precursor concentration from 0.08 M to 0.10 M. UV analysis shows that due to the high conductivity of copper nanoparticles might have caused the redshift at 630–634 nm. TGA show the energy of activation (Ea) of P is 22.90 KJ/mol which is more reactive than Q and R. An excellent arrangement in XRD and TEM confirms the average particle size near about 40 nm, with consists of crystal plane (111), (200) and (220). SAED confirmed the particles are elongated with the miller indices of the synthesized nanomaterials on (111), (200) and (220) planes. The EDS confirmed the purity of nanomaterials up to 86%. The adopted process may be employed to synthesize and synchronize the crystallinity of other metal nanoparticles.

Fast and easy synthesis of silver, copper, and bimetallic nanoparticles on cellulose paper assisted by ultrasound

This work focuses on a systematic method to produce Ag, Cu, and Ag/Cu metallic nanoparticles (MNPs) in situ assisted with ultrasound on cellulose paper. By tuning the concentration of AgNO3 and CuSO4 salt precursors and ultrasound time, combined with a fixed concentration of ascorbic acid (AA) as a reducing agent, it was possible to control the size, morphology, and polydispersity of the resulting MNPs on cellulose papers. Notably, high yield and low polydispersity of MNPs and bimetallic nanoparticles are achieved by increasing the sonication time on paper samples pre-treated with salt precursors before reduction with AA. Moreover, mechanical analysis on paper samples presenting well-dispersed and distributed MNPs showed slightly decreasing values of Young's modulus compared to neat papers. The strain at break is substantially improved in papers containing solely Ag or Cu MNPs. The latter suggests that the elastic/plastic transition and deformation of papers are tuned by cellulose and MNPs interfacial interaction, as indicated by mechanical analysis. The proposed method provides insights into each factor affecting the sonochemistry in situ synthesis of MNPs on cellulose papers. In addition, it offers a straightforward alternative to scale up the production of MNPs on paper, ensuring an eco-friendly method.

Fabrication of CuNPs Using Schiff Base Ligand and Their Catalytic Reduction of Pharmaceutical Drugs, Fluorescence Selective Detection of Cd2+, Antimicrobial, and Antioxidant Activities.

Here, we have approached the synthesis of copper nanoparticles (CuNPs) Schiff base (5-trifluoromethoxy-2-(((2chloro-5-(methyl)phenyl)imino)methyl)phenol)). The synthesized CuNPs were characterized by UV-vis spectroscopy, PL, FTIR, powder XRD, and TEM analysis. From the UV-vis absorption spectroscopy, an absorption peak was observed at 585 nm. As a result of the powder XRD and TEM studies, spherical particle sizes ranged between 4 and 10 nm. FT-IR analysis confirmed the presence of functional groups ‒OH, C=C, -C=N-, and C‒H triggers the synthesis of CuNPs. Further, the catalytic property of the CuNPs were revealed by the degradation of pharmaceutical drugs such as Capecitabine (CAP) and Ciprofloxacin (CIP) in 90 min of reaction time in the presence of NaBH4. The reaction kinetics followed pseudo-first-order with k-values (rate constant) 0.248 min-1 and 0.307 min-1. In addition, the synthesized CuNPs have exhibited selective sensing detection of Cd2+ metal ions in different range of concentration (10-100 µM) by spectrofluorometrically with the limit of detection (LOD) is 0.0284 nM and limit of quantification (LOQ) is 0.0586 nM. The CuNPs revealed significant antioxidant activities against DPPH as a common free radical at 50 µg/mL with 71.24% of scavenging activity. The maximum antimicrobial potential and zone of inhibition of P. Aeruginosa is 17.25±0.8 mm and A. niger is 12.1 mm by using CuNPs.

Green Synthesis of Copper Nanoparticles by Using Plant Extracts and their Biomedical Applications – An Extensive Review

Abstract: In recent years, the green synthesis of different metal nanoparticles has become a substantial technique for the synthesis of different essential nanoparticles and their potential applications in technological, industrial along with biomedical fields. Among the several essential nanoparticles, copper nanoparticles (CuNPs) have attracted enormous attention for their wide range of applications like the production of gas sensors, solar cells, high-temperature superconductors as well as drug delivery materials and catalysis owing to its distinctive optical, electrical, dielectric, imaging and catalytic, etc. properties. Herein, in this review, our aim is to find out the recent progress of synthesis, as well as different optical and structural characterizations of green, synthesized CuNPs along with their broadspectrum biomedical applications, mainly antibacterial, antifungal, antiviral and anticancer as well as the future perspective of research trends in the green synthesis of CuNPs. CuNPs have been synthesized by different researchers using three methods, namely, physical, chemical, and biological. In this review, the eco-friendly, efficient and low cost different established biological/green synthesis methods of CuNPs using different plant extracts like leaves, flowers, fruits, seeds, latex, etc., as capping and reducing agents have been briefly discussed, along with reaction conditions together with their optical as well as structural analysis. Effects of different parameters on the green synthesis of CuNPs like the presence of phytochemicals and confirmation of phytochemicals, temperature, pH, etc., are elucidated. Studies of the antibacterial activity of biomolecules capped CuNPs by different researchers against both Gram-positive and Gram-negative bacterial strains along with minimum inhibitory concentration (MIC) values have been summarized. Furthermore, antifungal and antiviral effects of green synthesized CuNPs studied by different researchers are mentioned with minimum inhibitory concentration (MIC) values. The anticancer activity of green synthesized CuNPs against different cancer cells studied by different researchers is summarized with correlation sizes of CuNPs on anticancer activity. The review also focuses on in vivo applications of green synthesized CuNPs along with clinical trails. Furthermore, an emphasis is given to the effectiveness of CuNPs in combating COVID-19.