Symmetric Cell Research Articles

N-doped polyacrylonitrile carbon fiber interlayer for uniform and dendrite free Zn metal battery

The aqueous zinc-ion battery’s (AZBs) inherent safety and inexpensive cost make it an attractive prospect for next-generation energy storage. Nevertheless, AZBs are presently troubled by the formation of Zn dendrites and unwanted side-reactions, which can lead to cycling instability and premature collapse. This study demonstrates the fabrication of an N-doped polyacrylonitrile (PAN) carbon fiber (PCF) network with ionic conductivity using the electrospinning of a PAN solution followed by thermal treatment. Zn plating and stripping behavior can be controlled by using a three-dimensional PCF with a polar functional group as an interlayer covering on the zinc anode. This allows for partially deposited zinc to be accommodated, which ultimately results in zinc dendrite-free deposition on the zinc anode. This phenomenon is initially proven in Zn@PCF symmetric cells, and then it is demonstrated further in Zn@PCF/MnO2 whole cells, where the dendritic Zn anode surfaces become completely smooth and devoid of any features. This results in a charging and discharging cycle that is far longer than one would normally experience. The findings of this study offer a viable path toward the development of dendrite-free AZBs with great performance.

H3PO4-Impregnated Covalent Organic Framework Membrane on Separators to Prevent Lithium Metal Anode Dendrite Growth.

Inhibiting the growth of lithium dendrites is crucial for battery safety. For separators, their favorable electrolyte wettability, uniform current density, and high ionic conductivity are beneficial for avoiding Li dendrite growth. In this work, we propose a separator (PA@COF/PP) by modifying a polypropylene separator with H3PO4-functionalized covalent organic frameworks. The uniform channels of the covalent organic frameworks and H3PO4 can homogenize the current and act as ionic conductors for efficient Li+ migration. The synthesized separator effectively suppresses the growth of lithium dendrites and improves the stability of the batteries. A symmetric cell with the PA@COF/PP separator exhibits a stable life span over 4000 hours at a high current density of 5 mA cm-2, compared to the commercial PP separator, which lasts only 159 hours. This work provides an efficient method and novel inspiration for the construction of dendrite-free lithium metal batteries.

Ni-Doped SFM Double-Perovskite Electrocatalyst for High-Performance Symmetrical Direct-Ammonia-Fed Solid Oxide Fuel Cells.

Ammonia has emerged as a promising fuel for solid oxide fuel cells (SOFCs) owing to its high energy density, high hydrogen content, and carbon-free nature. Herein, the electrocatalytic potential of a novel Ni-doped SFM double-perovskite (Sr1.9Fe0.4Ni0.1Mo0.5O6-δ) is studied, for the first time, as an alternative anode material for symmetrical direct-ammonia SOFCs. Scanning and transmission electron microscopy characterization has revealed the exsolution of Ni-Fe nanoparticles (NPs) from the parent Sr2Fe1.5Mo0.5O6 under anode conditions, and X-ray diffraction has identified the FeNi3 phase after exposure to ammonia at 800 °C. The active-exsolved NPs contribute to achieving a maximal ammonia conversion rate of 97.9% within the cell's operating temperatures (550-800 °C). Utilizing 3D-printed symmetrical cells with SFNM-GDC electrodes, the study demonstrates comparable polarization resistances and peak power densities of 430 and 416 mW cm-2 for H2 and NH3 fuels, respectively, with long-term stability and a negligible voltage loss of 0.48% per 100 h during ammonia-fed extended galvanostatic operation. Finally, the ammonia consumption mechanism is elucidated as a multistep process involving ammonia decomposition, followed by hydrogen oxidation. This study provides a promising avenue for improving the performance and stability of ammonia-based SOFCs for potential applications in clean energy conversion technologies.

One-dimensional lepidocrocite titania mesoparticles integrated with activated carbon for high-performance supercapacitor applications

Herein, we mix titania-based, TiO2, porous mesostructured, comprised of one-dimensional lepidocrocite nanofilaments, 1DLs, ≈ 5 × 7 Å2 in cross-section, with activated carbon, AC, to create unique composite structures with exceptional electrochemical properties. The synthesis method is facile, cost-effective, and scalable. While the porous mesoparticles, PMs, possess excellent protonic conductivity and exhibit enhanced faradic behavior in acidic aqueous media, their low electronic conductivity restricts their power output. The problem is solved by mixing the PMs with AC powders with various loadings. Electrolytes used were sulfuric acid, H2SO4, potassium hydroxide, KOH, lithium and Na-sulphates. The best PM loading was found to be 25 wt%. The resulting composite exhibits a specific capacitance (capacity) of 1024 Fg−1 (554 mAhg−1) at a 2 mVs−1 scan rate, with 97 % cyclic stability over 10,000 cycles when the electrolyte was 1 M H2SO4. Upon integration into a symmetrical device, the composite exhibited a specific energy of 135 Whkg−1 at 0.5 Ag−1. Further, it demonstrated a peak specific power of 18 kWkg−1, while retaining a specific energy of 54 Whkg−1 at 5 Ag−1. Notably, following 100,000 cycles at 1 Ag−1, the symmetrical cell sustained approximately 50 % of its initial specific capacitance. Subsequently, a 24 h self-discharge test revealed a decrease in cell voltage from 1.95 V to 0.48 V, thereby highlighting the potential suitability of these supercapacitors for short-term energy storage applications.

Constructing Donor–Acceptor-Linked COFs Electrolytes to Regulate Electron Density and Accelerate the Li+ Migration in Quasi-Solid-State Battery

HighlightsDonor–acceptor-linked covalent organic framework (COF)-based electrolyte can not only fulfill highly-selective Li+ conduction, but also offer a crucial opportunity to understand the role of electronic density in quasi-solid-state Li metal batteries.Donor–acceptor-linked COF electrolyte results in Li+ transference number 0.83, high ionic conductivity 6.7 × 10–4 S cm−1 and excellent cyclic ability in Li metal batteries.In situ characterizations, density functional theory calculation and time-of-flight secondary ion mass spectrometry are adopted to expound the mechanism of the rapid migration of Li+ in the “donor–acceptor” electrolyte system.

Dipole Moment Dictates the Preferential Immobilization in Gel Electrolytes for Ah-level Aqueous Zinc-Metal Batteries.

Aqueous Zn-metal batteries are of great interest due to their high material abundance, low production cost, and excellent safety. However, they suffer from severe side reactions and notorious dendrite growth closely related to electrolytes. Here, in-situ generated zwitterionic polymers are used as gel electrolytes to overcome these problems. It is shown that anions and H2O, but not anions and cations, are preferentially immobilized at different sites of zwitterionic polymers, facilitating the free migration of Zn2+ and reducing the side reactions. This immobilization can be associated with the dipole moment of zwitterionic polymers. As a result, poly[3-dimethyl(methacryloyl oxyethyl) ammonium propane sulfonate] (PDMAPS) stands out from a series of zwitterionic polymers and outperforms the other candidates in electrochemical performance. The symmetric cells using PDMAPS smoothly operate ~9000 h at 0.5 mA cm-2 for 0.5 mAh cm-2, much better than the controls. Moreover, PDMAPS enables an Ah-level pouch cell for continuous cycling. These results not only benefit the rational molecular design of advanced electrolytes, but also demonstrate the promising potential of zwitterionic polymers in aqueous Zn-metal batteries.

Electrochemical Kinetics of LiFePO4 Cathode Material in Non-flammable Inorganic Liquid Electrolyte.

We unveil the fundamental insights of electrochemical kinetics of LFP cathode material and the passivation layer formation in the SO2-based non-flammable inorganic liquid electrolyte (IE). The influence of temperature and electrochemical potential cutoff in the electrochemical activity of LFP cathode and IE is disclosed. Furthermore, the materials compatibility, structural and chemical stability of LFP in IE is demonstrated using very slow galvanostatic cycling in combination with LiFePO4||Li0.1FePO4 symmetric cells. The lithium storage performance of LFP half-cell using inorganic electrolyte is presented with the optimum voltage window. LFP half-cells exhibit discharge capacities of 147, 111, and 75 mAh/g at 1, 4, 8 C rates, respectively, with coulombic efficiencies of ~99.98 %. The electrochemical behavior and mechanism of LFP||Graphite cell in IE is investigated while concurrently tracking the electrochemical potentials of LFP and Graphite half-cell.

Unlocking the stable interface in aqueous zinc-ion battery with multifunctional xylose-based electrolyte additives

The growth of dendrites and the side reactions occurring at the Zn anode pose significant challenges to the commercialization of aqueous Zn-ion batteries (AZIBs). These challenges arise from the inherent conflict between mass transfer and electrochemical kinetics. In this study, we propose the use of a multifunctional electrolyte additive based on the xylose (Xylo) molecule to address these issues by modulating the solvation structure and electrode/electrolyte interface, thereby stabilizing the Zn anode. The introduction of the additive alters the solvation structure, creating steric hindrance that impedes charge transfer and then reduces electrochemical kinetics. Furthermore, in-situ analyses demonstrate that the reconstructed electrode/electrolyte interface facilitates stable and rapid Zn2+ ion migration and suppresses corrosion and hydrogen evolution reactions. As a result, symmetric cells incorporating the Xylo additive exhibit significantly enhanced reversibility during the Zn plating/stripping process, with an impressively long lifespan of up to 1986 h, compared to cells using pure ZnSO4 electrolyte. When combined with a polyaniline cathode, the full cells demonstrate improved capacity and long-term cyclic stability. This work offers an effective direction for improving the stability of Zn anode via electrolyte design, as well as high-performance AZIBs.

Compositional Engineering of Lithium Metal Anode for High-Performance Garnet-Type Solid-State Lithium Battery.

Garnet-type solid-state lithium batteries (SSLBs) possess excellent potential owing to their safety and high energy density. However, fundamental barriers are deficient cycling stability and poor rate capability. The main concern lies in generating voids at the Li|garnet interface during Li stripping, stemming from the sluggish diffusion of Li atoms inside the bulk Li metal. Herein, a composite anode (AN@Li) containing Li-Al alloy, Li3N, and LiNO2 is designed by introducing aluminum nitrate into molten Li. The lower interfacial formation energies exhibited by Li-Al alloy, Li3N, and LiNO2 with garnet solid-state electrolyte (SSE) enhance the wettability of AN@Li toward SSE. Meanwhile, it affords efficient conductive pathways that facilitate Li+ diffusion in the bulk anode (not just on the surface). Impressively, the resulting symmetric cell with AN@Li electrodes achieves high critical current density (1.95mA cm-2) and long cycle life (6000h at 0.3mA cm-2). The SSLB coupled with LiFePO4 cathode and AN@Li anode enables stable cycling for 200 cycles at a high rate of 1 C with a retention of 96% and exhibiting outstanding rate capability (145.9 mAh g-1 at 2 C). This work provides practical insights for producing high-performance lithium metal anode for advanced garnet-type SSLBs.

Evaluation of Oxide|Sulfide Heteroionic Interface Stability for Developing Solid-State Batteries with a Lithium-Metal Electrode: The Case of LLZO|Li6PS5Cl and LLZO|Li7P3S11.

Developing solid-state batteries (SSB) with a lithium metal electrode (LME) using only one type of solid electrolyte (SE) is a significant challenge since no SE fits all the requirements imposed by both electrodes. A possible solution is using multilayer SSBs with an LME where the drawbacks of each SE are overcome by using layers of different SEs. However, research on inorganic SE1|SE2 heteroionic interfaces is still quite preliminary, especially regarding oxide|sulfide heteroionic interfaces. This work reports the electrochemical investigation of the heteroionic interface between Li6.25Al0.25La3Zr2O12 (Al-LLZO) and two representative materials for sulfide-based SEs: argyrodite-based Li6PS5Cl (LPSCl) and glass-like Li7P3S11 (LPS711). Through in-depth temperature- and pressure-dependent impedance analyses of multilayer symmetric cells at equilibrium (i.e., no current load), the electrical properties of the heteroionic interfaces are assessed. The pressure-dependent kinetic of the Al-LLZO|LPSCl pair is interpreted with the concept of geometric constriction resistance and show that its resistance is lower than for the Al-LLZO|LPS711 pair. Furthermore, the effect of Al-LLZO surface treatment on the electrical properties of the Al-LLZO|LPSCl heteroionic interface is evaluated. Such investigation shows that the value of the interface activation energy decreases when the Al-LLZO surface is heat treated, revealing a significant influence of the carbonate/hydroxide passivation layer on the heteroionic interface. Additionally, by cycling the symmetric cell for 900 h at 1.0 mAh·cm-2, it is revealed that the Al-LLZO|LPSCl interface has a lower impedance increase than the Al-LLZO|LPS711 interface, especially if the Al-LLZO is heat treated. With this work, we highlight that the oxide|argyrodite combination can be a promising candidate for multilayer SSBs with an LME. However, we show that an optimized LLZO surface treatment and chemical analysis of the interface are recommended for future research.

Dual functional bio-inspired additives reconstruct metal-organic interface stability for wearable energy storage system

Aqueous zinc-ion batteries (AZIBs) hold significant promise across wearable energy storage devices due to their superior safety and cost-effectiveness. However, the instability of the electrode/electrolyte interface leads to severe hydrogen evolution reaction (HER) and dendritic growth. Herein, a bio-inspired additive, keratin (Ker), is introduced to construct a robust interfacial layer. The hydrogen bonding donors homogenize the distribution of interfacial hydrogen bond networks and increases the electron density in Zn2+-OH interaction, stabilizing bound H2O molecules and effectively inhibiting HER. Additionally, electron transfer from the highly reactive thiol (-SH) motivates the formation of Zn-S chemical linkage, enhancing interface stability. These features endow Zn||Zn symmetric cells with an impressive cycle life, reaching up to 3364 h at 1 mA cm−2/1 mAh cm−2. The Zn||α-MnO2 and Zn||VO2 full cells also exhibit a substantial capacity retention after 1000 cycles. Incorporating multi-step laser cutting technology enables the fabrication of flexible, large-area micro-batteries with prolonged cycle life. This study presents an advanced methodology for heralding a promising pathway to improve the reversibility of aqueous energy storage systems.

Nonflammable localized high-concentration deep eutectic electrolytes for safe and stable rechargeable aluminum batteries

Rechargeable aluminum batteries (RABs) are regarded as a promising next-generation energy storage system due to the high theoretical capacity, good safety, low cost, and abundant resources of aluminum. However, the practical development of RABs is impeded by the commonly used AlCl3-based electrolytes, which exhibit strong corrosion, high cost, and extreme sensitivity to air. Herein, we propose a novel deep eutectic electrolyte composed of hydrated aluminum perchlorate, N,N-dimethylacetamide (DMA) ligand, and 1,1,2,2-tetrafluoroethyl-2,2,3,3-tetrafluoropropylether (TFE) diluent (named as ADT45) for low-cost, intrinsically safe, and stable RABs. Various spectroscopic analyses combined with theoretical calculations reveal that TFE establishes a localized high-concentration environment in the electrolyte, which can not only boost ionic conductivity but also suppress side reactions through forming an AlF3-rich solid electrolyte interface layer. Evaluation of Al||Al symmetric cells and CuHCF||Al full cells demonstrates the ADT45 electrolyte can accelerate reaction kinetics and enhance cycling stability. Furthermore, the energy storage mechanism of the RAB with ADT45 is revealed through various in-situ and ex-situ characterizations. This study presents a novel approach for developing cost-effective and safe electrolytes for RABs for large-scale energy storage.

Multifunctional Water Additive Enabling Stable Cycling of Chloride‐Free Magnesium Metal Batteries Based on Carbonate Electrolyte

AbstractRechargeable magnesium batteries (RMBs) face with the challenge of interphase passivation between electrolytes and Mg anodes. Compared with ether electrolytes, carbonate solvents possess the superior electrochemical stability at cathode side, but their incompatibility with Mg metal, high viscosity, and desolvation energy barrier restrict their practical utilization in RMBs. Herein, the “unwanted‐impurity” water with high concentration is revisited and employed as multifunctional additive in carbonate electrolyte to improve the reversibility of RMBs. Water additive enables the localized deep eutectic effect, reduces the viscosity of carbonate electrolyte, and improves the Mg ion conductivity. The water molecules also participate the solvation sheath of Mg ions, resulting in the reduction of Mg deposition overpotential and inhibition of parasitic reaction. Furthermore, the co‐intercalated water molecules in V2O5 cathode layers enable the stabilization of intercalation structure and supply of additional magnesiophilic sites. Cooperated with the binder‐decorated Mg powder anode, the propylene carbonate electrolyte with water additive endows Mg||Mg symmetric cells and Mg||V2O5 full cells with satisfactory cycling performance and high‐voltage stability. This work revisits the impact of impurity water and provides a practical strategy for the utilization of conventional low‐cost carbonate electrolyte family, broadening the design and formulation of electrolytes for chlorine‐free and high‐voltage RMBs.

Enhanced Hydrogen Bonding Through Strong Water‐Locking Additives for Long‐Term Cycling of Zinc Ion Batteries

AbstractThe promising energy storage devices, zinc ion batteries (ZIBs), face challenges such as dendritic growth and side reactions, which hinder their application and development. As a polar group, hydroxyl groups can utilize hydrogen bonding to stably anchor water molecules, preventing contact between water and the anode. Moreover, they can attract and guide Zn2+ to rapidly and uniformly deposit on the anode. Here, the introduction of multi‐hydroxyl water‐locking additive Lactobionic acid (LA) molecules is proposed into conventional electrolytes. Through an in situ reaction between the highly reactive carboxyl groups on LA molecules and the zinc anode, a stable multi‐hydroxyl protective layer is formed on the anode surface, effectively preventing interface corrosion and dendritic growth. As a result, the Zn||Zn symmetric cell with LA exhibits remarkable performance, cycling for 2300 h under 1 mA cm−2 and 1 mAh cm−2. Even under more rigorous conditions of 10 mA cm−2 and 10 mAh cm−2, it maintains over 800 h of cycling durability. Moreover, in the Zn||NH4V4O10 full cell configuration, an impressive capacity retention rate of 80.35% after 2000 cycles at a current density of 5 A g−1. This innovative method can open a new avenue for designing high‐performance ZIBs.

Enhancing the electrochemical properties of polyethylene oxide solid-state electrolytes based on a small nano-sized UiO-66 metal-organic framework

Metal-organic frameworks (MOFs) have garnered significant attention in the field of Lithium-ion batteries due to their porous periodic network properties. However, this is a challenge to design high-performance solid-state electrolytes reasonably. Herein, a small nano-sized MOF Small-UiO-66 is reported, which has high surface area and mesoporous properties that can effectively inhibit PEO matrix crystallization. The presence of Small-UiO-66 accelerates the dissociation of lithium salts, which disrupts the ordered arrangement of the PEO chain segments. The abundant Lewis acidic sites on the surface of Small-UiO-66 facilitate the construction of abundant Li+ transport channels and promote Li+ conduction. Furthermore, the smaller nano-sized increase the interfacial wettability with lithium metal, which promotes the uniform diffusion of Li+ and inhibits the growth of lithium dendrites. The results indicate that 0.1 Zr-CSE exhibits high ionic conductivities of 6.94 × 10−4 S/cm at 60 °C. Based on 0.1 Zr-CSE, the Li||Li symmetric cell can operate stably for 1200 h at a current density of 0.1 mA/cm2, and the LFP||Li cell also achieves a high initial capacity of 147.65 mAh·g−1 at current densities of 0.5C. This work presents a novel approach for preparing high-performance solid-state Lithium-ion batteries using MOFs as fillers for polymer solid-state electrolytes.

Electrochemical Engineering of Anode with Zincophilic Polymer Interface for Reversible Zinc Battery

AbstractAqueous rechargeable zinc‐ion batteries are emerging as green and safe energy devices owing to their high energy density and eco‐friendliness. The bottleneck is the inhomogeneous nucleation resulting in the growth of Zn dendrites and the parasitic side reactions at the anode. Herein, an electrochemical anode engineering strategy is demonstrated to curb the uncontrolled dendritic growth and side reactions. It involves the in situ generation of a solid‐electrolyte interface based on a Zn nanoparticle‐embedded poly(acrylic acid) hybrid layer (PAA‐nZn) on the anode. The homogeneously distributed polar functionalities and porous nature of the polymer regulate the uniform zinc ion flux, and the embedded zinc particle serves as nucleation sites for zinc plating. The hybrid layer reduces the nucleation overpotential and promotes instantaneous nucleation. The symmetrical cell made with PAA‐nZn@Zn has a lifecycle of >860 h with a voltage gap of 28 mV. The full cell fabricated by pairing the engineered anode with α‐MnO2 cathode showed a high discharge specific capacity of 238.3 mAh g−1 at 0.2 A g−1 with a capacity retention of 81.76% after 200 cycles and a long lifecycle. The electrochemical engineering of the anode suppresses the dendritic growth and protects the anode from unwanted side reactions and passivation.

Electrolyte Additive l-Lysine Stabilizes the Zinc Electrode in Aqueous Zinc Batteries for Long Cycling Performance.

Rechargeable aqueous Zn-ion batteries (AZIBs) have been recognized as competitive devices for large-scale energy storage due to their characteristics of low cost, safe operation, and environmental friendliness. Nevertheless, their practical applications are greatly limited by zinc dendrite growth and side reactions occurring at the anode/electrolyte interface. Herein, we propose an effective and simple electrolyte engineering strategy, which is the introduction of l-lysine additive containing two amino groups and one carboxyl group into a ZnSO4 electrolyte to achieve stable and reversible Zn depositions. Theoretical calculations and experimental results reveal that the l-lysine can adsorb on the Zn anode surface due to the strong coordination effects between amino groups and Zn metal (Zn-N binding) and induce the reduction of ZnSO4 into inorganic ZnS, which can not only prevent interfacial side reactions but also regulate interfacial electric field on the zinc electrode surface to guide uniform Zn2+ electrodeposition to inhibit zinc dendrites. Consequently, the l-lysine additive in the electrolyte enables Zn||Zn symmetric cells to achieve an ultralong stable cycling up to 2400 h at 1 mA cm-2 with a low polarization of only about 16 mV and Zn||Cu asymmetric cells to obtain a high average Coulombic efficiency of 99.80% after stably cycling for more than 2000 h at 2 mA cm-2 (1 mAh cm-2). In addition, the Zn||MnO2@CNT full cell in an l-lysine-containing electrolyte also exhibits good cycling performance. This study offers a new perspective on multifunctional electrolyte additive for achieving highly reversible Zn metal anodes in AZIBs.

Reconfiguring Zn2+ Solvation Network and Interfacial Chemistry of Zn Metal Anode with Molecular Engineered Crown Ether Additive

AbstractThe practical deployment of rechargeable aqueous zinc‐ion batteries (RAZBs) in the scaled power system suffers from unregulated Zn dendrite growth as well as parasitic reactions at the zinc foil/aqueous electrolyte interface, leading to insufficient zinc utilization and severe electrode corrosion. Herein, a novel crown ether additive is developed, with tailored molecular engineering, to stepwise regulate the Zn2+ solvation network and interfacial chemistry of Zn metal anode. The designed crown ether (C5SeCN), featuring zincophilic cyano group and hydrophobic selenium, efficiently reconstructs the solvation sheath of Zn ions at the 0.3 wt.% dose amount. Additionally, the ozone plasma treatment tethers the O2‐ groups onto the thin‐layer zinc foil, which thus binds Se atoms of the C5SeCN to the Zn anode. The Zn||Zn symmetric cells exhibit a lifespan of over 4500 h at 1 mA cm−2 and high current density endurance of up to 10 mA cm−2. Moreover, the 2 mAh cm−2 Zn||V2O5 full cell model, at the low N/P ratio of 2.8 with a lean electrolyte (E/C ratio = 10 µL mAh−1), enables robust cycling endurance at 2 A g⁻¹ for 300 cycles. This study unravels the interfacial design rationales for maximizing zinc utilization and highlights the commercial potential of crown ether additives for RAZBs development.

Electric Field Regulator Constructed by Magnetron Sputtering for Dendrite‐Free and Stable Zinc Metal Anode

AbstractRechargeable aqueous zinc‐ion batteries (AZIBs) are considered to be one of the most promising devices in the next generation of energy storage systems. However, the uncontrolled growth of Zn dendrites during electroplating leads to rapid battery failure, which hinders the wide application of AZIBs. In this work, an Fe metal interface (FMI) with electric field regulation is designed on the Zn metal anode using a magnetron sputtering technology. The FMI layer with nanosheet array not only uniforms the surface electric field, but also adjusts the surface Zn2+ ion distribution to inhibit 2D diffusion. The strong orientation relationships of the FMI layer enhance the reversibility of Zn plating/stripping, improving the structural stability of the interface layer. Consequently, FMI@Zn symmetric cell exhibits ultra‐stable lifespan for over 6000 h (Cumulative plated capacity, CPC = 15 Ah cm−2) with a low voltage hysteresis of 46.4 mV and high Coulombic efficiency of 99.8% at 5 mA cm−2. Even at the large current density of 40 mA cm−2, the CPC reaches 19.7 Ah cm−2. The proposed electric field regulation strategy reveals a promising prospect for designing highly stable Zn anode, which also applies to other metal anodes in energy storage systems.

Electrodeposited CoMnS/NiCo2S4 nanocomposite for high performance supercapacitors

In this work, we report a facile two-step electrodeposition method to fabricate a CoMnS/NiCo2S4/NF (CMS/NCS/NF) composite on nickel foam (NF) for application of supercapacitor electrode. The electrochemical performance of this composite material has been extensively investigated, revealing superior performance compared to individual CMS/NF and NCS/NF materials. The CMS/NCS/NF composite exhibits an exceptionally high specific capacity of 707 C/g at a current density of 1 A/g in a three-electrode system. Remarkably, the material retains 92 % of its specific capacitance after 5000 cycles, indicating excellent cyclic stability and durability. To further explore its practical applications, we constructed a two-electrode symmetric supercapacitor using the CMS/NCS/NF electrode. This symmetric cell demonstrates an outstanding energy density of 97.5 Wh/kg and a peak power density of 12 kW/kg, underscoring its potential for high-performance energy storage applications. These comprehensive studies indicate that the synthesized CMS/NCS/NF is a highly promising candidate for supercapacitor electrodes, offering both high capacity and long-term stability. This work paves the way for the development of efficient and durable energy storage devices.