Sustained Drug Delivery Research Articles

Biowaste Valorization of Palm Tree Phoenix dactylifera L. for Nanocellulose Production.

The desire to reduce reliance on oil resources arises from the concerns about carbon footprint and nonrenewability. Conversely, the global presence of over 100 million palm trees poses a significant challenge due to the substantial amount of biowaste generated annually. Additionally, the use of nanocellulose (NC) as a cost-effective material is steadily gaining recognition for its growing adaptability over time. The main goal of this study is to biosynthesized NC from Iraqi date palm Phoenix dactylifera leaves waste with low-concentration acid-alkali treatment. The date palm leaves waste yields 20 g of NC from 100 g of leaves before acid hydrolysis treatment. The chemical components of biosynthesized NC were 47.90%, 26.78%, and 24.67% for α-cellulose, hemicellulose, and lignin, respectively. In order to study their properties, NC from raw date palm leaves was studied by microscopic techniques such as scanning electron microscopy (SEM), energy dispersive X-ray (EDX) spectroscopy, and atomic force microscope (AFM). SEM results revealed rod-like structured NC as well as combined long-fine fibrous structures rather than compacted bundles with sizes ranging between 31 and 74 nm. With EDX, all spectra exhibit the peaks of carbon and oxygen as the main elements with 63.8% and 10.44%, respectively, in their compositions, which relate to the typical composition of cellulose. The 3D image of AFM NC with a tapping mode presented a highly uniform distribution of NC with a size of ∼15 nm. The statistical roughness analysis shows that the obtained roughness average is 7.20 nm with the root-mean-square roughness value of 21.56 nm, which corresponded relatively with the micrographs of SEM. The results of this study demonstrate the promise of using date palm waste as raw material to produce NC as green nanocomposite from biodegradable nanomaterials for water purification and sustained drug delivery for biomedical applications. In this regard and because of the insufficient reports about the extraction of NC from palm tree leaves waste, the objective of this study was designed to fabricate NC biologically from fibers sourced from the waste of Iraqi date palm P. dactylifera leaves that left in agricultural lands or burned, which can be an ecological and health problem as a bionanocomposites in the medical and industrial field and as alternative resources of wood materials.

Dynamic hydrogel–metal–organic framework system promotes bone regeneration in periodontitis through controlled drug delivery

Periodontitis is a prevalent chronic inflammatory disease, which leads to gradual degradation of alveolar bone. The challenges persist in achieving effective alveolar bone repair due to the unique bacterial microenvironment’s impact on immune responses. This study explores a novel approach utilizing Metal–Organic Frameworks (MOFs) (comprising magnesium and gallic acid) for promoting bone regeneration in periodontitis, which focuses on the physiological roles of magnesium ions in bone repair and gallic acid's antioxidant and immunomodulatory properties. However, the dynamic oral environment and irregular periodontal pockets pose challenges for sustained drug delivery. A smart responsive hydrogel system, integrating Carboxymethyl Chitosan (CMCS), Dextran (DEX) and 4-formylphenylboronic acid (4-FPBA) was designed to address this problem. The injectable self-healing hydrogel forms a dual-crosslinked network, incorporating the MOF and rendering its on-demand release sensitive to reactive oxygen species (ROS) levels and pH levels of periodontitis. We seek to analyze the hydrogel’s synergistic effects with MOFs in antibacterial functions, immunomodulation and promotion of bone regeneration in periodontitis. In vivo and in vitro experiment validated the system's efficacy in inhibiting inflammation-related genes and proteins expression to foster periodontal bone regeneration. This dynamic hydrogel system with MOFs, shows promise as a potential therapeutic avenue for addressing the challenges in bone regeneration in periodontitis.Graphical

Development and characterization of simvastatin loaded Chitosan nanoparticles for sustained drug delivery

Development and characterization of simvastatin loaded Chitosan nanoparticles for sustained drug delivery

Investigating Internalization of Reporter-Protein-Functionalized Polyhedrin Particles by Brain Immune Cells.

Achieving sustained drug delivery to the central nervous system (CNS) is a major challenge for neurological injury and disease, and various delivery vehicles are being developed to achieve this. Self-assembling polyhedrin crystals (POlyhedrin Delivery System; PODS) are being exploited for the delivery of therapeutic protein cargo, with demonstrated efficacy in vivo. However, to establish the utility of PODS for neural applications, their handling by neural immune cells (microglia) must be documented, as these cells process and degrade many biomaterials, often preventing therapeutic efficacy. Here, primary mouse cortical microglia were cultured with a GFP-functionalized PODS for 24 h. Cell counts, cell morphology and Iba1 expression were all unaltered in treated cultures, indicating a lack of acute toxicity or microglial activation. Microglia exhibited internalisation of the PODS, with both cytosolic and perinuclear localisation. No evidence of adverse effects on cellular morphology was observed. Overall, 20-40% of microglia exhibited uptake of the PODS, but extracellular/non-internalised PODS were routinely present after 24 h, suggesting that extracellular drug delivery may persist for at least 24 h.

Drug Integrating Amphiphilic Nano-Assemblies: 2. Spatiotemporal Distribution within Inflammation Sites.

The need for chronic systemic immunosuppression, which is associated with unavoidable side-effects, greatly limits the applicability of allogeneic cell transplantation for regenerative medicine applications including pancreatic islet cell transplantation to restore insulin production in type 1 diabetes (T1D). Cell transplantation in confined sites enables the localized delivery of anti-inflammatory and immunomodulatory drugs to prevent graft loss by innate and adaptive immunity, providing an opportunity to achieve local effects while minimizing unwanted systemic side effects. Nanoparticles can provide the means to achieve the needed localized and sustained drug delivery either by graft targeting or co-implantation. Here, we evaluated the potential of our versatile platform of drug-integrating amphiphilic nanomaterial assemblies (DIANAs) for targeted drug delivery to an inflamed site model relevant for islet transplantation. We tested either passive targeting of intravenous administered spherical nanomicelles (nMIC; 20-25 nm diameter) or co-implantation of elongated nanofibrils (nFIB; 5 nm diameter and >1 μm length). To assess the ability of nMIC and nFIB to target an inflamed graft site, we used a lipophilic fluorescent cargo (DiD and DiR) and evaluated the in vivo biodistribution and cellular uptake in the graft site and other organs, including draining and non-draining lymph nodes, after systemic administration (nMIC) and/or graft co-transplantation (nFIB) in mice. Localized inflammation was generated either by using an LPS injection or by using biomaterial-coated islet-like bead implantation in the subcutaneous site. A cell transplant inflammation model was used as well to test nMIC- and nFIB-targeted biodistribution. We found that nMIC can reach the inflamed site after systemic administration, while nFIB remains localized for several days after co-implantation. We confirmed that DIANAs are taken up by different immune cell populations responsible for graft inflammation. Therefore, DIANA is a useful approach for targeted and/or localized delivery of immunomodulatory drugs to decrease innate and adaptive immune responses that cause graft loss after transplantation of therapeutic cells.

Tissue engineered multifunctional chitosan-modified polypropylene hernia mesh loaded with bioactive phyto-extracts

Surface modified tissue engineered polypropylene / PP hernia meshes were fabricated by incorporating Bacterial cellulose / BC and chitosan / CS and phytochemical extracts. Under current practice, hernia and other traumatic injuries to the abdominal organs are clinically treated with surgical meshes. Often the foreign body reaction and infections result in relapse in patients which dictates additional reparative surgical procedures and pain. To improve the outcome of clinical restorative procedures new biomaterials with improved characteristics are required. The functionalized meshes were physically and chemically characterized using SEM, mechanical testing, FTIR and XRD. The antimicrobial activity was qualitatively and quantitatively tested using E. coli and S. aureus strains of bacteria. In vitro biocompatibility and wound healing effect of the modified meshes were performed using NIH3T3 fibroblast cell lines. Furthermore, tissue engineering potential of the meshes was evaluated using confocal fluorescent microscopy. In vivo implantation of the meshes was performed in male wistar rats for 21 days. Therefore, PP meshes with sustained drug delivery system augmented with anti-inflammatory and anti-microbial characteristics were developed. The coatings hereby not only increased the tensile strength of meshes but also prevented the modified meshes from causing infection. Current study resulted in CS-BC bioactive PP meshes loaded with phytochemicals which showed anti-inflammatory, antibacterial and wound healing potential. These meshes can be valuable to lessen the post-surgical complications of implanted PP mesh and thus reduce rejection and recurrence.

Tailored synthesis of pH-responsive biodegradable microcapsules incorporating gelatin, alginate, and hyaluronic acid for effective-controlled release

In response to escalating environmental concerns and the urgent need for sustainable drug delivery systems, this study introduces biodegradable pH-responsive microcapsules synthesized from a blend of gelatin, alginate, and hyaluronic acid. Employing the coacervation process, capsules were created with a spherical shape, multicore structure, and small sizes ranging from 10 to 20 μm, which exhibit outstanding vitamin E encapsulation efficiency. With substantial incorporation of hyaluronic acid, a pH-responsive component, the resulting microcapsules displayed noteworthy swelling behavior, facilitating proficient core ingredient release at pH 5.5 and 7.4. Notably, these capsules can effectively deliver active substances to the dermal layer under specific skin conditions, revealing promising applications in topical medications and cosmetics. Furthermore, the readily biodegradable nature of the designed capsules was demonstrated through Biochemical Oxygen Demand (BOD) testing, with over 80 % of microcapsules being degraded by microorganisms after one week of incubation. This research contributes to the development of responsive microcapsules and aligns with broader environmental initiatives, offering a promising pathway to mitigate the impact of microplastics while advancing various applications.

Exploring the Effectiveness of Carboxymethylated and Crosslinked Albizia procera Gum in Diltiazem Hydrochloride Matrix Tablets: A Comparative Analysis.

This study investigates the efficacy of modified Albizia procera gum as a release-retardant polymer in Diltiazem hydrochloride (DIL) matrix tablets. Carboxymethylated Albizia procera gum (CAP) and ionically crosslinked carboxymethylated Albizia procera gum (Ca-CAP) were utilized, with Ca-CAP synthesized via crosslinking CAP with calcium ions (Ca2+) using calcium chloride (CaCl2). Fourier Transform (FT) IR analysis affirmed polymer compatibility, while differential scanning calorimetry (DSC) and X-ray diffraction (XRD) assessed thermal behavior and crystallinity, respectively. Zeta potential analysis explored surface charge and electrostatic interactions, while rheology examined flow and viscoelastic properties. Swelling and erosion kinetics provided insights into water penetration and stability. CAP's carboxymethyl groups (-CH2-COO-) heightened divalent cation reactivity, and crosslinking with CaCl2 produced Ca-CAP through -CH2-COO- and Ca2+ interactions. Structural similarities between the polymers were revealed by FTIR, with slight differences. DSC indicated modified thermal behavior in Ca-CAP, while Zeta potential analysis showcased negative charges, with Ca-CAP exhibiting lower negativity. XRD highlighted increased crystallinity in Ca-CAP due to calcium crosslinking. Minimal impact on RBC properties was observed with both polymers compared to the positive control as water for injection (WFI). Ca-CAP exhibited improved viscosity, strength, controlled swelling, and erosion, allowing prolonged drug release compared to CAP. Stability studies confirmed consistent six-month drug release, emphasizing Ca-CAP's potential as a stable, sustained drug delivery system over CAP. Robustness and accelerated stability tests supported these findings, underscoring the promise of Ca-CAP in controlled drug release applications.

Designing of a new transdermal antibiotic delivery polymeric membrane modified by functionalized SBA-15 mesoporous filler

A new drug delivery system using an asymmetric polyethersulfone (PES) membrane modified by SBA-15 and glutamine-modified SBA-15 (SBA-Q) was prepared in this study by the aim of azithromycin delivery enhancement in both in vitro and ex vivo experiments. The research focused on optimizing membrane performance by adjusting critical parameters including drug concentration, membrane thickness, modifier percentage, polymer percentage, and pore maker percentage. To characterize the fabricated membranes, various techniques were employed, including scanning electron microscopy, water contact angle, and tensile strength assessments. Following optimization, membrane composition of 17% PES, 2% polyvinylpyrrolidone, 1% SBA-15, and 0.5% SBA-Q emerged as the most effective. The optimized membranes demonstrated a substantial increase in drug release (906 mg/L) compared to the unmodified membrane (440 mg/L). The unique membrane structure, with a dense top layer facilitating sustained drug release and a porous sub-layer acting as a drug reservoir, contributed to this improvement. Biocompatibility assessments, antibacterial activity analysis, blood compatibility tests, and post-diffusion tissue integrity evaluations confirmed the promising biocompatibility of the optimized membranes. Moreover, long-term performance evaluations involving ten repeated usages underscored the reusability of the optimized membrane, highlighting its potential for sustained and reliable drug delivery applications.

Functionalization of psyllium to develop bioactive network hydrogels for sustained drug delivery

Functionalization of psyllium to develop bioactive network hydrogels for sustained drug delivery

A review on polymers in ocular drug delivery systems

AbstractAmid the escalating prevalence of eye diseases and the intricate nature of the eye as a crucial target organ for drug delivery, researchers face significant challenges in developing delivery systems tailored specifically for ocular complications. Addressing the gaps in the current conventional ocular drug delivery system (ODDS) is crucial and this can be achieved by incorporating polymers while designing newer ODDS. This review aims to offer a concise overview of the diverse polymers utilized in the development of ODDS, designed to address various eye conditions and disorders, enhance treatment outcomes, and ensure patient adherence. Introducing the anatomy of the eye and different ocular routes of administration, alongside the barriers encountered, this review presents polymer‐based ODDS, renowned for their unique properties facilitating the engineering of specialized devices for enhanced drug delivery. Further discussions delve into the applications of polymers in ophthalmology. Emphasis is placed on emerging polymer‐based technologies available in the market for treating ocular diseases, underscoring their potential for revolutionizing ocular healthcare. The review also addresses challenges in translating these advancements into clinical practice, while highlighting the versatility of polymers in treating diverse eye diseases and disorders through customizable properties and sustained drug delivery.

Powerful Protein Nanoreservoirs Based on Stellate Mesoporous Silica Embedded in Composite Hydrogels: From Burst Release to Retention

AbstractIn the biomaterials field, one major issue with hydrogels (HGs) loaded with active therapeutics is the spontaneous leaking of the cargo occurring rapidly, usually over several hours. However, biological processes involved in regenerative medicine would require to have a sustained drug delivery lasting over weeks/months or be triggered only when a specific biochemical stimulus (enzymatic, cellular, or antimicrobial) is applied. In this work, this challenge is addressed by demonstrating that the spontaneous protein release from an agarose HG (used as model HG) can be partially or totally blocked by the incorporation of stellate mesoporous silica (STMS) nanoparticles (NPs, ≈150 ± 28 nm size, 15 nm pore) within the HG. It is shown here that the porous silica NPs act as sub‐micrometer size reservoirs ensuring precise level retention simply by playing on the amount of STMS embedded in the HG. Further, this effect is shown for various proteins demonstrating the versatility of this concept.

Injectable Chitosan Hydrogels Doped with 2D Peptide Nanosheet-Drug Conjugates for Glutathione-Responsive Sustained Drug Delivery.

The development of novel and effective drug delivery systems aimed at enhancing therapeutic profile and efficacy of therapeutic agents is a critical challenge in modern medicine. This study presents an intelligent drug delivery system based on self-assembled two-dimensional peptide nanosheets (2D PNSs). Leveraging the tunable properties of amino acid structures and sequences, we design a peptide with the sequence of Fmoc-FKKGSHC, which self-assembles into 2D PNSs with uniform structure, high biocompatibility, and excellent degradability. Covalent attachment of thiol-modified doxorubicin (DOX) drugs to 2D PNSs via disulfide bond results in the peptide-drug conjugates (PDCs), which is denoted as PNS-SS-DOX. Subsequently, the PDCs are encapsulated within the injectable, thermosensitive chitosan (CS) hydrogels for drug delivery. The designed drug delivery system demonstrates outstanding pH-responsiveness and sustained drug release capabilities, which are facilitated by the characteristics of the CS hydrogels. Meanwhile, the covalently linked disulfide bond within the PNS-SS-DOX is responsive to intracellular glutathione (GSH) within tumor cells, enabling controlled drug release and significantly inhibiting the cancer cell growth. This responsive peptide-drug conjugate based on a 2D peptide nanoplatform paves the way for the development of smart drug delivery systems and has bright prospects in the future biomedicine field.

Inhalable FN-binding liposomes or liposome-exosome hybrid bionic vesicles encapsulated microparticles for enhanced pulmonary fibrosis therapy

Pulmonary fibrosis (PF) is a chronic, progressive and irreversible interstitial lung disease that seriously threatens human life and health. Our previous study demonstrated the unique superiority of traditional Chinese medicine cryptotanshinone (CTS) combined with sustained pulmonary drug delivery for treating PF. In this study, we aimed to enhance the selectivity, targeting efficiency and sustained-release capability based on this delivery system. To this end, we developed and evaluated CTS-loaded modified liposomes-chitosan (CS) microspheres SM(CT-lipo) and liposome-exosome hybrid bionic vesicles-CS microspheres SM(LE). The prepared nano-in-micro particles system integrates the advantages of the carriers and complements each other. SM(CT-lipo) and SM(LE) achieved lung myofibroblast-specific targeting through CREKA peptide binding specifically to fibronectin (FN) and the homing effect of exosomes on parent cells, respectively, facilitating efficient delivery of anti-fibrosis drugs to lung lesions. Furthermore, compared with daily administration of conventional microspheres SM(NC) and positive control drug pirfenidone (PFD), inhaled administration of SM(CT-lipo) and SM(LE) every two days still attained similar efficacy, exhibiting excellent sustained drug release ability. In summary, our findings suggest that the developed SM(CT-lipo) and SM(LE) delivery strategies could achieve more accurate, efficient and safe therapy, providing novel insights into the treatment of chronic PF.

Design, Synthesis, and Evaluation of Lipoyl Ester Conjugated Star PLGA for Sustained Drug Delivery Systems

Background: Poly(lactic-co-glycolic acid) (PLGA), an FDA-approved copolymer, is widely recognized for its biocompatibility, biodegradability, and versatility in drug delivery systems. Despite its advantages, challenges, such as poor drug loading and burst release, motivate the exploration of innovative modifications. The current research aimed to modify the linear PLGA to lipoyl ester terminated star PLGA polymer to minimize initial burst release by increasing the molecular weight and fabricate risperidone-loaded microspheres. Methods: In this study, we have presented a novel approach involving the synthesis of star PLGA through the direct melt polycondensation of PLGA with pentaerythritol, followed by conjugation with lipoic acid to form lipoyl ester terminated star PLGA. Structural confirmation was done by Fourier Transform Infrared spectroscopy (FT-IR), proton Nuclear Magnetic Resonance (1H-NMR), and Gel Permeation Chromatography (GPC). Microspheres were fabricated from lipoyl ester terminated star PLGA and characterized for their particle size and surface morphology by Scanning Electron Microscopy (SEM) and in vitro drug release by dialysis bag method Results: The results of the study have indicated successful conjugation of lipoic acid to star PLGA forming lipoyl ester terminated star PLGA, as confirmed by FT-IR, 1H-NMR, and GPC analyses. Microspheres developed from the synthesized polymer exhibited particle sizes ranging from 4.64 μm to 11.7 μm and demonstrated sustained drug delivery, with 99.8% release over 45 d, in contrast to the plain drug that achieved complete dissolution within 3 h. Conclusion: The resulting material has demonstrated unique bioresponsive and multifunctional properties, with evidence of successful synthesis provided through comprehensive characterization techniques, and suitability for the fabrication of microspheres for sustained drug delivery systems.

Yeast‐Controlled Double‐Shelled CaCO3/CaF2 Hollow Nanospheres with Hierarchically Porous for Sustained pH‐Sensitive Drug Release

Comprehensive SummaryHierarchically porous materials (HP materials) are believed one of the most hopeful matrix materials because of their distinctive multimodal pore structures and tremendous application potentials in the field of biomedicine. However, green and facile synthesis of hierarchically porous nanomaterials with beneficial water dispersibility and biocompatibility is still a great challenge. Herein, a novel biomimetic strategy is proposed to prepare the cell‐tailored double‐shelled HPCaCO3/CaF2 hollow nanospheres under the mediation of yeast cells. The biomolecules derived from the secretion of yeast cells are used as conditioning and stabilizing agents to control the biosynthesis of the HPCaCO3/CaF2 materials, which exhibit excellent water dispersibility and favorable biocompatibility. The double‐shelled CaCO3/CaF2 nanospheres hold hierarchically porous structure and have abundant pore channel and large specific surface area, showing high drug‐loading and a prolonged drug sustainable release profile by the pore‐by‐pore diffusion pattern of the hierarchical pores. Otherwise, the HPCaCO3 with pH‐sensitivity could controllably release drug doxorubicin hydrochloride (DOX) at the acidic tumor microenvironment. Both in vitro and in vivo results demonstrate that HPCaCO3/CaF2 has the sustainable pH‐sensitive drug release property, showing an enhanced therapeutic effect. Summarily, this study provides a biomimetic strategy to synthesize the hierarchically porous double‐shelled hollow nanomaterials for applying in sustainable drug delivery system.

Zwitterionic functionalization of polysaccharide gum by graft copolymerization to develop 3-D network materials for anticancer drug delivery applications

Herein, functionalization of polysaccharide gum has been carried out to develop network copolymeric materials for use in sustained anticancer drug delivery. Grafting reaction of poly[2-(methacryloyloxy)ethyl] dimethyl-(3-sulfopropyl)ammonium hydroxide (MEDSAH) onto sterculia gum has been done in the presence of crosslinker. Copolymeric materials were characterized by scanning electron micrographs (SEMs), atomic force microscopy (AFM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), 13C-nuclear magnetic resonance (NMR), and thermogravimetric analysis (TGA). SEM, AFM and XRD displayed heterogeneous morphology with a rough surfaces of amorphous copolymeric materials. Peaks at 173.822 ppm (carbonyl carbon) and at 60.653 ppm (methylene carbon attached to a quaternary ammonium group) confirmed the addition of poly(MEDSAH) during the grafting reaction. Mesh size in network hydrogel was found between 14.54 nm to 36.32 nm. Sustained release of doxorubicin was found with non-Fickian diffusion and was best demonstrated by the kinetic model Hixson Crowell. The biocompatibility of material was revealed in a haemolytic index (1.74 ± 0.26%) less than two percent during the copolymer-blood interaction. The material exhibited antioxidant and mucoadhesion properties. Free radical scavenging ability of copolymers was 49.41 ± 0.97% in 2,2-diphenyl-1-picrylhydrazyl (DPPH) assay of the antioxidant test. These properties of copolymeric hydrogels demonstrated their suitability for use in sustained drug delivery systems for cancer chemotherapy.

Polysaccharides as a Hydrophilic Building Block of Amphiphilic Block Copolymers for the Conception of Nanocarriers.

Polysaccharides are gaining increasing attention for their relevance in the production of sustainable materials. In the domain of biomaterials, polysaccharides play an important role as hydrophilic components in the design of amphiphilic block copolymers for the development of drug delivery systems, in particular nanocarriers due to their outstanding biocompatibility, biodegradability, and structural versatility. The presence of a reducing end in polysaccharide chains allows for the synthesis of polysaccharide-based block copolymers. Compared with polysaccharide-based graft copolymers, the structure of block copolymers can be more precisely controlled. In this review, the synthesis methods of polysaccharide-based amphiphilic block copolymers are discussed in detail, taking into consideration the structural characteristics of polysaccharides. Various synthetic approaches, including reductive amination, oxime ligation, and other chain-end modification reactions, are explored. This review also focuses on the advantages of polysaccharides as hydrophilic blocks in polymeric nanocarriers. The structure and unique properties of different polysaccharides such as cellulose, hyaluronic acid, chitosan, alginate, and dextran are described along with examples of their applications as hydrophilic segments in the synthesis of amphiphilic copolymers to construct nanocarriers for sustained drug delivery.

Phase transforming in situ gels for sustained and controlled transmucosal drug delivery via the intravaginal route

Direct, reliable, controlled, and sustained drug delivery to female reproductive tract (FRT) remains elusive, with conventional dosage forms falling way short of the mark, leading to premature leakage, erratic drug delivery, and loss of compliance. Historically, the intravaginal route remains underserved by the pharmaceutical sector. To comprehensively address this, we turned our focus to phase-transforming sol-gels, using poloxamers, a thermosensitive polymer and, doxycycline (as hyclate salt, DOXH) as our model agent given its potential use in sexually transmitted infections (STIs). We further enhanced mucoadhesiveness through screening of differing viscosity grade hydroxypropyl methyl celluloses (HPMCs). The optimised sol-gels remained gelled at body temperature (<37 °C) and were prepared in buffer aligned to vaginal cavity pH and osmolality. Lead formulations were progressed based on their ability to retain key rheological properties, and acidic pH in the presence of simulated vaginal fluid (SVF). From a shelf-life perspective, DOXH stability, gelation temperature (Tsol-gel), and pH to three months (2–8 °C) was attained. In summary, the meticulously engineered, phase-transforming sol-gels provided sustained mucoretention despite dilution by vaginal fluid, paving the way for localised antimicrobial drug delivery at concentrations that potentially far exceed the minimum inhibitory concentration (MIC) for target STI-causing bacteria of the FRT.

Evaluating physiochemical characteristics of tragacanth gum-gelatin network hydrogels designed through graft copolymerization technique

The present work deals with the evaluation of the physiochemical and biomedical properties of hydrogels derived from copolymerization of tragacanth gum (TG) and gelatin for use in drug delivery (DD) applications. Copolymers were characterized by field emission-scanning electron micrographs (FE-SEM), electron dispersion X-ray analysis (EDAX), Fourier transform infrared spectroscopy (FTIR), 13C-nuclear magnetic resonance (NMR), thermo-gravimetric analysis (TGA), differential scanning calorimetry (DSC) and X-ray diffraction (XRD) analysis. FE-SEM revealed heterogeneous morphology and XRD analysis demonstrated an amorphous nature with short range pattern of polymer chains within the copolymers. The release of the drug ofloxacin occurred through a non-Fickian diffusion mechanism and the release profile was best described by the Korsmeyer-Peppas kinetic model. The hydrogels exhibited blood compatibility and demonstrated a thrombogenicity value of 75.63 ± 1.98 % during polymer-blood interactions. Polymers revealed mucoadhesive character during polymer-mucous membrane interactions and required 119 ± 8.54 mN detachment forces to detach from the biological membrane. The copolymers illustrated the antioxidant properties as evidenced by 2, 2′-diphenylpicrylhydrazyl (DPPH) assay which demonstrated a 65.71 ± 3.68 % free radical inhibition. Swelling properties analysis demonstrated that by change in monomer and cross linker content during the reaction increased the crosslinking of the network. These results suggest that the pore size of network hydrogels could be controlled as per the requirement of DD systems. The copolymers were prepared at optimized reaction conditions using 14.54 × 10−1 molL−1 of acrylic acid monomer and 25.0 × 10−3 molL−1 of crosslinker NNMBA. The optimized hydrogels exhibited a crosslink density of 2.227 × 10−4 molcm−3 and a mesh size of 7.966 nm. Additionally, the molecular weight between two neighboring crosslinks in the hydrogels was determined to be 5332.209 gmol−1.The results indicated that the combination of protein-polysaccharide has led to the development of hydrogels suitable for potential applications in sustained drug delivery.