Virtual Surgery Research Articles

Impact of sleep deprivation on surgical performance on a robotic surgery simulator.

Impact of sleep deprivation on surgical performance on a robotic surgery simulator.

Perspectives in Using Multiple Flaps Reconstructions for Advanced Head and Neck Tumors (Scoping Review).

Background and Objectives: Patients with advanced head and neck tumors require salvage surgery as a last resort. These extensive surgeries pose the challenge of complex reconstructions. The head and neck surgeon undertaking such complex cases needs to master different flaps. The team managing these patients needs input from various specialists, along with otorhinolaryngologists, plastic surgeons, maxillofacial surgeons, vascular surgeons, experienced radiologists, dedicated pathologists, oncologists and radiation therapists. We focus on the optimum solution between oncologic resections and the future quality of life of patients and overall survival. Each complex case requires a personalized medicine approach. This scoping review aims to assess the efficacy and outcomes of complex reconstructions using various flaps for head and neck tumors, with a focus on free flaps and emerging techniques. Materials and Methods: A systematic search of the literature was conducted following PRISMA guidelines, resulting in the inclusion of 44 articles that met the predefined criteria in the last 10 years. Results: The included studies encompassed diverse patient populations and evaluated various surgical techniques, outcomes, complications, and advancements in head and neck reconstruction. The review identified a variety of flaps utilized in head and neck tumor reconstruction, including free flaps such as the radial forearm, anterolateral thigh, scapular tip, and myocutaneous flaps, among others. The success rates for free flap reconstructions ranged from 85% to 100%, with notable variations attributed to patient selection, tumor characteristics, and surgical expertise. Conclusions: Complications such as flap necrosis, infection, hematoma, and donor site morbidity were documented across studies, highlighting the importance of meticulous surgical planning and postoperative care. Furthermore, the review revealed emerging techniques such as computer-aided design, virtual surgery, stereolithographic models, customized implants, tissue engineering, and allotransplants, offering promising reconstructive armamentarium. Advances in surgical techniques and emerging technologies hold promise for further enhancing reconstructive outcomes, minimizing morbidity, and improving patient quality of life.

Simulation-based training in robotic surgery education: bibliometric analysis and visualization.

Simulation-based robotic surgery training may help surgeons gain operative skills and experience in the simulation environment. This bibliometric analysis examined the development of simulation-based training for robotic surgical education. Articles pertaining to robotic surgical simulation training that were included in the Web of Science Core Collection up to April 25, 2024, were included. The temporal patterns in published paper numbers were evaluated using Microsoft Excel software, and the data regarding co-authorship and keyword co-occurrence were analyzed and visualized using the VOSviewer and SCImago Graphica tools. A total of 594 papers on simulation-based training for robotic surgical education were evaluated in this study. The United States and United Kingdom were the leading contributors in this field. The most published authors were Professor Ahmed Kamran (23 publications) and Prokar Dasgupta (22 publications). The highest number of papers was published in the journal titled "Surgical Endoscopy and Other Interventional Techniques." The most common keywords were "virtual reality," "curriculum," "robotic surgery simulator," "assessment," and "learning curve." Our study offers a detailed overview of international research on simulation-based training for robotic surgical education, including the publishing countries, institutions, authors, journals, and research hotspots. It also methodically summarizes the state of knowledge in the area, and provides definite directions and concepts for further in-depth analysis.

Photoangiolysis with the 445-nm Blue Laser and the Potassium-Titanyl-Phosphate Laser: A Comparison.

Photoangiolytic lasers have yielded significant innovation in laryngeal surgery in the last 25 years. After the discontinuation of the potassium titanyl phosphate (KTP) laser, a novel 445-nm blue laser was developed. The optimal balance between a laser's desired tissue effects and collateral tissue damage is a major determinant of laser selection in microlaryngeal surgery. The shell-less incubation system for the chick chorioallantoic membrane (CAM) simulates the microvasculature of the human vocal fold and is useful for testing effects of laser settings and in simulated surgery. The aim of this study is to compare the tissue effects of the KTP and blue lasers using the shell-less CAM model. The shell-less incubation system contains: polymethylpentene film (used as a culture vessel), calcium lactate and distilled water supplementations. By using this system, the chick chorioallantoic membrane (CAM) can be fully exposed with a good field for surgery simulation. The effects of the 2 lasers (532 nm KTP and 445 nm blue) were quantified at clinically relevant energy settings and laser distances from target. Measures included imaging real-time vascular reactions in the CAM model, post-procedure histologic analysis of CAM tissue and temperature changes. Vessel coagulation and rupture rates were less common with the blue laser compared with the KTP laser. Histologic analysis demonstrated less tissue disruption with the blue laser. Temperature changes were less with the blue laser. In this CAM model with specific conditions, the blue laser reveals less tissue damage than the KTP laser. Suitable working distance and power setting of the laser are necessary for desired tissue effects.Level of Evidence: Level 3.

Virtually Augmented Surgical Navigation in Endoscopic Sinus Surgery Simulation Training: A Prospective Trial of Repeated Measures.

The objective of this study was to explore the educational utility of virtually augmented surgical navigation (VASN) in simulation training for endoscopic sinus surgery. Prospective trial using within-subjects design. Single academic institution. Otolaryngology trainees (n = 15) were enrolled in a prospective trial of repeated measures. Participants performed unilateral functional endoscopic sinus surgery (FESS) on a 3-dimensional-printed sinus model without instruction. Participants then underwent educational intervention incorporating VASNtools-featuring anatomic overlay delineations, virtual planning points, proximity alerts, digital measurements, as well as artificial intelligence-generated endoscopic viewpoints. With the VASN tools activated, participants then performed FESS on the contralateral side of the model. Primary outcomes of interest included number of major complications, time to complete anterior fess, steps completed, and technical skills score. Descriptive statistics were performed to describe participant characteristics and bivariate analysis were used to evaluate differences in subjective and objective outcome measures. A majority (93%) of residents strongly agreed that simulation intervention improved their confidence in surgical skills related to FESS. Complications decreased from 13 instances to 3 following interventions. Initial technical skills score of 45.2 increased to 54.4 postintervention (P < .0001) and global score also improved by 4.6 points on average (P < .001). Time to anterior FESS decreased from 1356 to 915seconds (P = .006) and average number of completed surgical steps increased from 3.3 to 4.6 (P < .001). This simulation study contributes to growing evidence supporting utility of advanced technology in surgical education. Results suggest that VASN serves as a beneficial adjunct in FESS simulation training.

Assessment of the evolution of psychomotor skills in the robotic surgery simulation process.

Robotic surgery is a rapidly expanding field, given the wide variety of new robotic platforms emerging. Looking at the training of surgeons in robotic surgery is of extreme necessity and urgency, considering the ongoing technological advancements. In this research, the performance during the virtual reality simulation phase of training for robotic surgery was analyzed. It was observed that, in addition to the lack of consensus among societies regarding the required simulation hours, there is no guidance on the best curriculum to be adopted. From the data in this study, it can be inferred that the more advanced skills have fewer proficient individuals, meaning that fewer surgeons in training have reached proficiency in all skill exercises. Even with differences in the number of exercises performed proficiently between groups that underwent varying amounts of simulation time, there is no statistically significant difference in the proportion between them.

Surgical Navigation and CAD-CAM-Designed PEEK Prosthesis for the Surgical Treatment of Facial Intraosseous Vascular Anomalies.

Background: Intraosseous vascular anomalies in the facial skeleton present significant diagnostic and therapeutic challenges due to complex anatomy. These anomalies represent about 0.5-1% of bony neoplastic and tumor-like lesions, usually presenting as a firm, painless mass. Most described intraosseous vascular malformations are venous malformations (VMs) and, more rarely, arteriovenous malformations. Objectives: The objectives of this work are to show our experience, protocol and the applications of computer planning, virtual surgery, CAD-CAM design, surgical navigation, and computer-assisted navigated piezoelectric surgery in the treatment of facial intraosseous vascular anomalies and to evaluate the advantages and disadvantages. Methods: Three females and one male with periorbital intraosseous vascular anomalies were treated using en-block resection and immediate reconstruction with a custom-made PEEK prosthesis. One lesion was in the supraorbital rim and orbital roof, one in the frontal bone and orbital roof, and two in the zygomatic region. We accomplished the resection and reconstruction of the lesion using virtual planning, CAD-CAM design, surgical navigation and piezoelectric device navigation. Results: There were no complications related to the surgery assisted with navigation. With an accuracy of less than 1 mm, the procedure may be carried out in accordance with the surgical plan. The surgeon's degree of uncertainty during deep osteotomies and in locations with low visibility was decreased by the use of the navigated piezoelectric device. Conclusions: Resection and reconstruction of facial intraosseous vascular anomalies benefit from this new surgical strategy using CAD-CAM technologies, computer-assisted navigated piezoelectric surgery, and surgical navigation.

Current status of resident simulation training curricula: pearls and pitfalls.

Residency programs are required to incorporate simulation into their training program. Ideally, simulation provides a safe environment for a trainee to be exposed to both common and challenging clinical scenarios. The purpose of this review is to detail the current state of the most commonly used laparoscopic, endoscopic, and robotic surgery simulation programs in general surgery residency education, including resources required for successful implementation and benchmarks for evaluation. Members of the Society of American Gastrointestinal and Endoscopic Surgeons (SAGES) Resident and Fellow Task Force (RAFT) Committee performed a literature review using PubMed and training websites. Information regarding the components of the most commonly used laparoscopic, endoscopic, and/or robotic simulation curriculum, including both formal and informal benchmarks for evaluating training competence, were collected. Laparoscopic simulation revolves around the Fundamentals of Laparoscopic Surgery (FLS). Proficiency-based as well as virtual simulation have been utilized for FLS training curricula. Challenges include less direct translation to the technical complexities that can arise in laparoscopic surgery. Endoscopic simulation focuses on the Fundamentals of Endoscopic Surgery. There are virtual reality simulation platforms that can be used for skills assessment and training. Challenges include simulator types and access, as well as structured mentoring and feedback. Robotic simulation training curricula have not been standardized. Simulation includes one primary technology, which can be prohibitive based on cost and requirements for onboarding. While surgical simulation seems to be a fundamental and integrated part of surgical training, it requires a significant number of resources, which can be daunting for residency training programs. Regardless of the barriers outlined, the need for surgical simulation in laparoscopy, endoscopy, and robotics at surgical education training programs is clear.

Systematic Review on the Use of 3D-Printed Models for Planning, Training and Simulation in Vascular Surgery.

The use of 3D-printed models in simulation-based training and planning for vascular surgery is gaining interest. This study aims to provide an overview of the current applications of 3D-printing technologies in vascular surgery. We performed a systematic review by searching four databases: PubMed, Web of Science, Scopus, and Cochrane Library (last search: 1 March 2024). We included studies considering the treatment of vascular stenotic/occlusive or aneurysmal diseases. We included papers that reported the outcome of applications of 3D-printed models, excluding case reports or very limited case series (≤5 printed models or tests/simulations). Finally, 22 studies were included and analyzed. Computed tomography angiography (CTA) was the primary diagnostic method used to obtain the images serving as the basis for generating the 3D-printed models. Processing the CTA data involved the use of medical imaging software; 3DSlicer (Brigham and Women's Hospital, Harvard University, Boston, MA), ITK-Snap, and Mimics (Materialise NV, Leuven, Belgium) were the most frequently used. Autodesk Meshmixer (San Francisco, CA, USA) and 3-matic (Materialise NV, Leuven, Belgium) were the most frequently employed mesh-editing software during the post-processing phase. PolyJet™, fused deposition modeling (FDM), and stereolithography (SLA) were the most frequently employed 3D-printing technologies. Planning and training with 3D-printed models seem to enhance physicians' confidence and performance levels by up to 40% and lead to a reduction in the procedure time and contrast volume usage to varying extents.

Effect of condylar rotation on the stress environment of the temporomandibular joint in patients with mandibular protrusion

PurposeThe study aims to analyse the effects of condylar rotation on the biomechanical environment of the TMJ after bilateral sagittal split ramus osteotomy (BSSRO) through the finite element method (FEM). MethodsThirteen patients with mandibular prognathism and twenty-three normal subjects were recruited. The three-dimensional (3D) models were reconstructed. 13 representative morphological parameters were measured for comparison. A patient was selected to perform virtual BSSRO surgery by rotating the condyles in MIMICS. The preoperative and postoperative 3D models of the patient were subsequently imported into ABAQUS for finite element analysis. The preoperative and postoperative stresses and joint spaces in the TMJs were investigated. ResultsThe maxillofacial morphologies of the patients with mandibular protrusion was significantly different from those of the asymptomatic subjects (P<.05). Stresses in the postoperative group were lower than those in the preoperative group. The rotation of the condyle could cause the variations in stress levels and joint spaces within the TMJs. Inward and upward rotation of the condyle was associated with higher stress in the TMJ, whereas the lowest stress was observed when the condyle remained stationary following surgical intervention. SignificanceLateral, medial and superior joint spaces were more related to the stresses in the TMJs. The condyle should be kept in place as much as possible to avoid disrupting the balance of the TMJ in patients with mandibular protrusion.

Simulation and training for pediatric colorectal surgery and anorectal malformation: a scoping review.

To study the published literature for various models used for simulation and training in the field of pediatric colorectal surgery. A PubMed search was conducted for studies of simulation models in anorectal malformation on 24 March 2024 with the search words 'simulation pediatric colorectal surgery' followed by another search on 'simulation AND anorectal malformation' that gave 22 and 14 results, respectively (total 36). After removing 4 duplicate publications, 12 were found relevant to simulation and training in colorectal diseases. One publication relevant to the topic was added from literature, thirteen articles were studied. Of these, 5; 1; 4; and 3 were on inanimate models; animate model; 3D reconstructions; and training, respectively. Simulation models are available for posterior sagittal anorectoplasty. The same inanimate model was used in five articles. The animate model was based on a chicken cadaver. 3D models have been made for personalized preoperative assessment and to understand the imaging in anorectal malformation. One 3D model was made by regeneration of organoid epithelium. Training modules were made to evaluate surgical dissection, standardize surgical techniques, and improve proficiency. Simulation models are an important tool for teaching the steps of surgery and discussing the nuances of operative complications among mentors and peers. With advances in this field, the development of high-fidelity models, more training modules, and consensus on surgical techniques will benefit surgical training.

High-resolution computed tomographic (HRCT) image series from 413 canid and 18 felid skulls

Computed tomography (CT) is a non-invasive, three-dimensional imaging tool used in medical imaging, forensic science, industry and engineering, anthropology, and archaeology. The current study used high-resolution medical CT scanning of 431 animal skulls, including 399 dog skulls from 152 breeds, 14 cat skulls from 9 breeds, 14 skulls from 8 wild canid species (gray wolf, golden jackal, coyote, maned wolf, bush dog, red fox, Fennec fox, bat-eared fox), and 4 skulls from 4 wild felid species (wildcat, leopard, serval, caracal). This comprehensive and unique collection of CT image series of skulls can provide a solid foundation not only for comparative anatomical and evolutionary studies but also for the advancement of veterinary education, virtual surgery planning, and the facilitation of training in sophisticated machine learning methodologies.

MS-TCRNet: Multi-Stage Temporal Convolutional Recurrent Networks for action segmentation using sensor-augmented kinematics

Action segmentation is a challenging task in high-level process analysis, typically performed on video or kinematic data obtained from various sensors. This work presents two contributions related to action segmentation on kinematic data. Firstly, we introduce two versions of Multi-Stage Temporal Convolutional Recurrent Networks (MS-TCRNet), specifically designed for kinematic data. The architectures consist of a prediction generator with intra-stage regularization and Bidirectional LSTM or GRU-based refinement stages. Secondly, we propose two new data augmentation techniques, World Frame Rotation and Hand Inversion, which utilize the strong geometric structure of kinematic data to improve algorithm performance and robustness. We evaluate our models on three datasets of surgical suturing tasks: the Variable Tissue Simulation (VTS) Dataset and the newly introduced Bowel Repair Simulation (BRS) Dataset, both of which are open surgery simulation datasets collected by us, as well as the JHU-ISI Gesture and Skill Assessment Working Set (JIGSAWS), a well-known benchmark in robotic surgery. Our methods achieved state-of-the-art performance.code: https://github.com/AdamGoldbraikh/MS-TCRNet.

Development and Validation of a Novel Human-Fixed Cadaveric Model Reproducing Cerebrospinal Fluid Circulation for Simulation of Endoscopic Endonasal Skull Base Surgery.

Endoscopic endonasal surgery is a well-established surgical approach to the skull base. Surgeons need a reusable long-lasting tool to acquire the skills needed for skull base reconstruction. The aim of this study was to elaborate and validate a human formalin-fixed cadaveric model that reproduces a realistic cerebrospinal fluid (CSF) circulation and that adequately renders a CSF leak. An external ventricular drain that connects with a peristaltic pump is placed in the subarachnoid space, which allows a water circulation that reproduces CSF circulation. Intracranial pressure is measured in real time. Endoscopic endonasal skull base approaches are performed, to create different skull base openings and CSF leaks. Participants were tasked with reconstruction of the defects using a standardized multilayered approach, with the goal of obtaining a watertight closure under normal intracranial pressure ranges. Compiled data included time of reconstruction, years of experience of participants, and success/failure to achieve a watertight reconstruction. A Likert questionnaire was also used. The cadaveric model reproduced CSF circulation in 4 types of dural defects: sellar, suprasellar, transcribriform, and transclival. Intracranial pressures were similar to physiological conditions and were reproducible. Each model was tested multiple times, over several months. Success rates concurred with training levels (r = .8282 and P = .0017). A strong inverse correlation was also found between years of experience and time of reconstruction (r = .4977 and P < .0001). Participants agreed that the model was realistic (median Likert score of 4), and they strongly agreed that it allowed for the improvement of their surgical skills (median Likert score of 5). This novel human-fixed cadaveric model for CSF circulation is efficient and adequately reproduces surgical conditions for skull base approaches. The model is unique, easy to reproduce, and reusable. It can be used as a tool for teaching and for research purposes.

Digital technology revolutionizing mandibular fracture treatment: a comparative analysis of patient-specific plates and conventional titanium plates.

The treatment of fractures prioritizes the restoration of functionality through the realignment of fractured segments. Conventional methods, such as titanium plates, have been employed for this purpose; however, certain limitations have been observed, leading to the development of patient-specific plates. Furthermore, recent advancements in digital technology in dentistry enable the creation of virtual models and simulations of surgical procedures. The aim was to assess the clinical effectiveness of patient-specific plates utilizing digital technology in treating mandibular fractures compared to conventional titanium plates. Twenty patients diagnosed with mandibular fractures were included and randomly assigned to either the study or control groups. The surgical procedure comprised reduction and internal fixation utilizing patient-specific plates generated through virtual surgery planning with digital models for the study group, while the control group underwent the same procedure with conventional titanium plates. Assessment criteria included the presence of malunion, infection, sensory disturbance, subjective occlusal disturbance and occlusal force in functional maximum intercuspation (MICP). Statistical analysis involved using the Chi-square test and one-way repeated measures analysis of variance. All parameters showed no statistically significant differences between the study and control groups, except for the enhancement in occlusal force in functional MICP, where a statistically significant difference was observed (p = 0.000). Using patient-specific plates using digital technology has demonstrated clinical effectiveness in treating mandibular fractures, offering advantages of time efficiency and benefits for less experienced surgeons. Patient-specific plates combined with digital technology can be clinically effective in mandibular fracture treatment.

A Comprehensive Training Model for Simulation of Intracranial Aneurysm Surgery Using a Human Placenta and a Cadaveric Head.

Aneurysmal surgery is technically complex, and surgeon experience is an important factor in therapeutic success, but training young vascular neurosurgeons has become a complex paradigm. Despite new technologies and simulation models, cadaveric studies still offer an incomparable training tool with perfect anatomic accuracy, especially in neurosurgery. The use of human placenta for learning and improving microsurgical skills has been previously described. In this article, we present a comprehensive simulation model with both realistic craniotomy exposure and vascular handling consisting of a previously prepared and perfused human placenta encased in a human cadaveric specimen. Humans' placentas from the maternity and cadaveric heads from the body donation program of the anatomy laboratory were used. Placentas were prepared according to the established protocol, and aneurysms were created by catheterization of a placental artery. Ten participants, including senior residents or young attendees, completed an evaluation questionnaire after completing the simulation of conventional unruptured middle artery aneurysm clipping surgery from opening to closure. The skin incision, muscle dissection, and craniotomy were assessed as very similar to reality. Brain tissue emulation and dissection of the lateral fissure were judged to be less realistic. Vascular management was evaluated as similar to reality as closure. Participants uniformly agreed that this method could be implemented as a standard part of their training. This model could provide a good model for unruptured aneurysm clipping training.

Changes in DOPAC, 3-MT, DOPAC/DA, HVA/DA, 3-MT/DA in the Hippocampus After Simulated Septoplasty and Maxillary Sinusotomy

Objective: to evaluate changes in DOPAC, 3-MT, DOPAC/DA, HVA/DA, 3-MT/DA in the hippocampus after simulation of septoplasty and maxillofacial surgery in rats. Materials and methods. Simulation of operations was carried out on male Wistar rats under general anesthesia with Zoletil 100 solution. In group 1, septoplasty (n=10) was simulated by the standard method by zigzag scarification of the nasal mucosa. In group 2 (n=10), dental implantation with a titanium implant was performed after the implant bed was formed using drill. In group 3 (n=10), only implant bed was made in the alveolar ridge of the upper jaw without subsequent manipulations. In group 4, 10 rats underwent sinus lifting with bone chips with immediate implantation of a titanium implant. In group 5 (n=10)– with the help of a micro drill through a pre-formed implant bed in the alveolar ridge of the upper jaw, a maxillary sinusotomy was performed with damage to the mucous membrane of the ipsilateral maxillary sinus. Liquid chromatography with electrochemical detection was used to determine the concentration of dopamine (DA), homovanilic acid (HVA), 3,4-dihydroxyphenylacetic acid (DOPAC), 3- methoxytiramine (3-MT) in the hippocampal formation. DOPAC/DA, HVA/DA, 3-MT/DA were also determined. Results. The concentration of dopamine in the hippocampus, compared with the control, was significantly higher in group 5 and lower in group 4. The HVA concentration was significantly higher in group 2, group 5 (p&lt;0.01) and group 1 (p&lt;0.05). An intergroup comparison determined that the concentration of HVA was significantly higher in group 2, compared with the rest of the experimental groups (p&lt;0.001). In groups 1, 3 and 4, this indicator was significantly lower compared to group 5 (p&lt;0.01). The DOPAC level was significantly higher (p&lt;0.01) compared to the control data. The concentration of 3-MT was significantly higher in groups 4 and 5 (p&lt;0.001), as well as in group 1 (p&lt;0.05) and in group 3 (p&lt;0.01). Conclusion. After simulating sinus lifting with immediate implantation and dental implantation complicated by maxillary sinusotomy, there is an increase in the concentration of dopamine metabolites 3-MT, HVA and DOPAC, but at the same time a decrease in dopaminergic activity of the hippocampal formation, compared with simulation of septoplasty and simple damage to the alveolar ridge of the upper jaw. Such changes are markers of disruption of adaptation processes after surgery in the head and neck.

Developing a piezoresistive sensor based bionic neurological intraoperative monitoring system for spine surgery skill training.

This research aims to tackle the limitations faced in surgical education nowadays, particularly in the complex field of spinal cord tumor removal surgery. An innovative flexible piezoresistive sensor designed to mimic a motor nerve was developed and integrated into a bionic spine surgery simulation system, allowing for the intraoperative nerve monitoring possible during simulated tumor removal surgeries. The motor nerve, fabricated using a combination of carbon nanotubes and silicone rubber, exhibited a strong correlation between applied force and resultant changes in resistance, as confirmed by experimental results. This creative system can play an important role in providing valuable feedback for training doctors, facilitating the assessment of surgical precision and success, and enabling doctors to take necessary precautions to minimize the risk of nerve damage in real surgical scenarios. Ultimately, this proposed system has the potential to elevate the standard of surgical education, foster skill development among doctors, and significantly contribute to enhanced patient care and recovery.

Computational fluid dynamics (CFD), virtual rhinomanometry, and virtual surgery for neonatal congenital nasal pyriform aperture stenosis

ObjectivesInvestigate the implications of Congenital Nasal Pyriform Aperture Stenosis (CNPAS) on neonatal nasal airflow through computational fluid dynamics (CFD), create a virtual rhinomanometry, and simulate the prospective outcomes post-virtual surgical intervention. MethodsCT scanning of a neonate diagnosed with CNPAS and a control model were used to execute CFD simulations. The segmentation file of the CNPAS underwent manual modifications to simulate a virtual surgical procedure, resulting in a geometry that mirrors a post-operatively corrected patient. Virtual rhinomanometry was reconstructed, and airflow dynamics within the nasal cavity were systematically assessed. The results of the three models were compared. ResultsIn the CNPAS model, airflow dynamics underwent discernible alterations, with the principal airflow corridor confined to the nasal cavity's upper region. There was a marked pressure drop around the nasal valve, and diminished velocities. This first model of virtual surgery has allowed us to observe that the airflow parameters trended toward the control model, reintroducing an airflow trajectory between the lower and middle turbinates. Virtual rhinomanometry presented near-complete nasal obstruction in the CNPAS model, which showed considerable improvement after the virtual surgery. ConclusionCFD highlights the aerodynamic changes resulting from CNPAS. It also allows for the creation of virtual rhinomanometry and the performance of virtual surgeries. Virtual surgery confirms the therapeutic potential of pyriform aperture enlargement techniques used in clinical practice to improve nasal respiratory function. Future research will investigate additional surgical scenarios and the application of these findings to optimize surgical interventions for CNPAS.

Training in cardiothoracic surgery: The role for simulation.

Adequate cardiothoracic surgical training is essential for provision of quality care to patients. In recent years, simulation-based training has been advocated as an adjunct to traditional surgical training. Advances in simulation technology has resulted in many low- and highfidelity simulators being employed in cardiothoracic surgical training. Such models allow trainees to practice an array of realistic full-length procedures in a safe and controlled environment, with the window to make mistakes and consider them learning points. There is significant evidence to demonstrate the effectiveness of cardiothoracic surgery simulation in improving surgical skills and operating room performances in addition to building confidence among trainees. However, owing to the high financial cost of arranging it, simulation-based training is not widespread in low- and middle-income countries, including Pakistan. More work is warranted on the cost effectiveness of implementing simulation-based learning, which, in turn, would increase the uptake of simulation to enhance cardiothoracic surgical training in Pakistan.