Surface Plasmon Coupling Research Articles

Detection of backside coupled propagating surface plasmon resonance on the sidewall of a wafer

We proposed a surface plasmon resonance (SPR) sensor structure that utilized a glass wafer with a diffraction grating and an n-type silicon piece bonded near the SPR coupling site. This configuration enabled surface plasmon excitation from the back of the substrate without the unwanted interaction between the excitation light and the sample, and electrical detection of the SPR response by a 0.7-eV Schottky barrier at the Au/n-Si interface formed on the sidewall of the silicon piece was achieved. Experimental evaluation of the surface plasmon coupling performance was conducted, showing clear peaks in the photocurrent for various wavelengths in the NIR-II window, ranging from 1100 to 1300 nm. The device’s ability to detect propagating surface plasmons as a photocurrent was confirmed; the results indicated a consistent trend with theoretical and numerical calculations. Since the device was composed of a glass substrate, the use of wavelengths shorter than the near-infrared wavelength was possible, including visible wavelengths where the optical absorption by water is negligible. Thus, our proposed sensor provides a compact and efficient solution for SPR sensing in aqueous solutions.

Investigation on the optical properties of Al nanograting deep-ultraviolet LEDs with rough surface of sapphire

The optical properties of Al nanograting deep ultraviolet LEDs with a rough surface of sapphire are investigated by the finite-difference time-domain simulation. The rough surface of sapphire is characterized by rms amplitude and correlation length. The calculation results indicate that the rough sapphire surface is easier to extract s-polarized light than p-polarized light, which leads to an increase in the polarization degree. When the rms and correlation length are around 150 nm, the light extraction efficiency (LEE) of LED devices can reach a maximum. Compared to the smooth surface condition, the LEE of Al nanograting LEDs with a period of 300 nm is improved by 65.47% at rms = 150 nm and correlation length = 100 nm. This can be attributed to the critical angle of light extraction increasing from ∼23° on a smooth surface to ∼46° on a rough surface. In addition, due to surface plasmon coupling, when the period of Al nanograting is 100–800 nm, the peak intensity of the TE or TM polarized radiation recombination rate is basically 37%–50% higher than that of the control structure with an Al plane.

Tunable narrowband and broadband coexisting absorber enabled by a simple all-metal grating for sensing applications

We realize a tunable narrowband and broadband coexisting absorber based on a simple step-shaped all-metal grating structure. The absorber presents an ultra-narrow absorption band of 1.5 nm and a relatively broad absorption band of 29.8 nm, both with nearly 100% absorption in the infrared region. The mechanism underlying the dual-band perfect absorption is the interaction between two diffraction coupled surface plasmon polariton (SPP) modes with one of them modulated by a cavity resonance. Influences of structure parameters on the absorption performance are numerically investigated. It is found that the positions of the two perfect absorption peaks can be easily tuned both independently and together by changing the structural parameters. In addition, the designed grating structure presents excellent sensing performance with sensitivity and figure of merit as high as 2,514 nm/RIU and 1,600 RIU−1, respectively. The excellent sensing performance, flexible tenability and simple structure design endow this grating absorber with great potential in high-precision biochemical sensing applications.

Nitrogen Photoelectrochemical Reduction on TiB2 Surface Plasmon Coupling Allows Us to Reach Enhanced Efficiency of Ammonia Production.

Ammonia is one of the most widely produced chemicals worldwide, which is consumed in the fertilizer industry and is also considered an interesting alternative in energy storage. However, common ammonia production is energy-demanding and leads to high CO2 emissions. Thus, the development of alternative ammonia production methods based on available raw materials (air, for example) and renewable energy sources is highly demanding. In this work, we demonstrated the utilization of TiB2 nanostructures sandwiched between coupled plasmonic nanostructures (gold nanoparticles and gold grating) for photoelectrochemical (PEC) nitrogen reduction and selective ammonia production. The utilization of the coupled plasmon structure allows us to reach efficient sunlight capture with a subdiffraction concentration of light energy in the space, where the catalytically active TiB2 flakes were placed. As a result, PEC experiments performed at -0.2 V (vs. RHE) and simulated sunlight illumination give the 535.2 and 491.3 μg h-1 mgcat-1 ammonia yields, respectively, with the utilization of pure nitrogen and air as a nitrogen source. In addition, a number of control experiments confirm the key role of plasmon coupling in increasing the ammonia yield, the selectivity of ammonia production, and the durability of the proposed system. Finally, we have performed a series of numerical and quantum mechanical calculations to evaluate the plasmonic contribution to the activation of nitrogen on the TiB2 surface, indicating an increase in the catalytic activity under the plasmon-generated electric field.

Electric- and magnetic-dipole surface lattice resonances in microwave regime

At optical frequencies, the collective excitation of the periodic array of metallic meta-molecules can support surface lattice resonances (SLRs) due to the coupling of localized surface-plasmon (LSP) resonances to Rayleigh anomaly diffraction. However, the LSP effect in metal blocks becomes negligible in the microwave region. Thus, how the SLRs behave in the microwave regime is very interesting. In this paper, a microwave metasurface consisting of periodic metallic cubes on an ultrathin dielectric substrate is investigated. Two high-Q transmission dips are found, which can be attributed, respectively, to electric-dipole SLRs (ED-SLRs) and magnetic-dipole SLRs (MD-SLRs), because of the non-resonant Rayleigh-like scattering of single cubes and diffraction coupling of the periodic array. The frequencies of both ED- and MD-SLRs are sensitive to the refractive index of the substrate, suggesting that the proposed metasurface may be used to measure the refractive index in the microwave range.

Au decorated ZnO nanostructures for enhanced visible emission and memory applications

Metal/semiconductor nanocomposites present the most versatile way to tune the optical and electrical properties of semiconductors at the nanometer scale. In the present study, Au/ZnO contacts were investigated for their potential applications in optoelectronic devices. There is general agreement that the resonant excitation of surface plasmons (SP) of metal nanoparticles (NP) can couple with the excitons of semiconductors and tune their optical emissions. In this work, the SP and exciton coupling is thoroughly examined using temperature dependent photoluminescence (PL) spectroscopy and Raman spectroscopy in the Au-NPs coated ZnO nanowires. Peculiar to the conventional optical response of Au/ZnO nanostructures at room temperature, PL measurements manifest the suppression of the band edge emissions and enhanced deep level emissions after Au-NPs coating. Raman spectroscopy showed the surface-enhanced Raman scattering (SERS) effect due to field enhancement of the incident light by the SP thus demonstrating potential in ultrasensitive sensing applications. Also, ZnO memristors were fabricated with Au electrodes that exhibited high endurance and longtime retentive bipolar resistive switching characteristics with low SET/RESET voltages. Altogether, present results demonstrate that Au/ZnO composites hold promise for plasmonic based nanoelectronics for memory and neuromorphic applications.

Symmetrical dual D-shape fiber for waveguide coupled surface plasmon resonance sensing

A waveguide-coupled surface plasmon resonance (WCSPR) sensor consisting of two D-shape single-mode fibers is designed and analyzed by the finite element method (FEM). The optical field of the surface plasmon polaritons (SPPs) mode is confined in the dielectric cavity between the dual metallic thin films. Therefore, the effective refractive index of the SPP mode depends largely on the refractive index of the analyte and an anomalous dispersion relationship is observed between the SPP mode and x-polarized core-guide mode of the dual D-shape fiber. The excitation mechanism of surface plasmon resonance (SPR) in the coupling region is attributed to phase matching of the two modes. Further analysis shows that the narrow bandwidth peak in the loss spectrum of the core mode is determined by the sensor dimensions contributed jointly by the thicknesses of the silver film, dielectric layer, and titanium dioxide film. Compared to the single-fiber structure, the optimized dual D-shape WCSPR sensor achieves a maximum wavelength sensitivity of 52,200 nm/RIU with a full-width at half-minimum (FWHM) of 9.47 nm and a figure of merit (FOM) of 346.6 RIU−1 in the analyte refractive index range of 1.32–1.42.

Sulfur dots/Au@Ag nanorods array-based polarized ECL sensor for the detection of thyroid cancer biomarker

The combination of highly sensitive electrochemiluminescence (ECL) techniques with localized surface plasmon resonance (LSPR) effect can achieve the highly sensitive and specific detection in the analytical and biosensing applications. However, how to effectively improve the electromagnetic field intensity is an unresolved issue. Herein, we have developed an ECL biosensor based on sulfur dots and Au@Ag nanorod array architecture. Firstly, the high luminescent sulfur dots with ionic liquid capping (S dots (IL) have been prepared as the new ECL emitter. The ionic liquid greatly improved the conductivity of sulfur dots in the sensing process. Furthermore, Au@Ag nanorods array structure was constructed on the electrode surface by the evaporation induced self-assembly. On the one hand, the LSPR of Au@Ag nanorods was more significant than that of good nanomaterial due to the plasma hybridization and the competition between free electrons and oscillating electrons. On the other hand, nanorods array structure had strong electromagnetic field intensity as hot spots due to the surface plasmon coupling ECL effect (SPC-ECL) effect. Therefore, the Au @Ag nanorods array architecture not only greatly enhanced the ECL intensity of sulfur dots, but also changed the ECL signals into polarized emission. Finally, the constructed polarized ECL sensing system was used to detect the mutated BRAF DNA in the eluent of thyroid tumor tissue. The biosensor showed the linear range from 100 fM to 10 nM with a detection limit of 20 fM. The satisfactory results demonstrated that the developed sensing strategy had great potential in the clinical diagnosis of BRAF DNA mutation in thyroid cancer.

Near-field radiative heat transfer in three-body system based on topological insulator Bi2Se3

This study investigates the near-field radiative heat flux in a three-body system made of Bi2Se3, a topological insulator that supports hyperbolic phonon polaritons (HPPs) in the terahertz frequency range. We demonstrate that the near-field radiative heat flux in the three-body system made of Bi2Se3 is remarkably enhanced compared to the two-body counterpart. The thickness of the intermediate body or the chemical potential of Bi2Se3 can be used to control the radiative heat flux. Our numerical results reveal that the heat flux initially increases and then decreases with the thickness of the intermediate body, indicating that an optimal heat flux can be obtained by selecting an appropriate chemical potential and intermediate body thickness. Moreover, increasing the chemical potential of Bi2Se3 shifts the hybrid surface plasmon phonon polaritons, which arise from the coupling of surface plasmons and HPPs, toward higher frequencies. These findings have important implications for developing thermal devices such as thermal transistors and offer a promising approach to modulating near-field radiative heat transfer and thermal management.

Analysis and Modeling of Novel Organic Material BOBzBT2 With Strong Coupling of Frenkel Excitons and Surface Plasmon

Analysis and Modeling of Novel Organic Material BOBzBT₂ With Strong Coupling of Frenkel Excitons and Surface Plasmon

Asymmetric Heterodimer-Regulated Surface Plasmon Coupling ECL Polarization Strategy for MiRNA-182 Detection.

In this work, a novel plasmonic heterodimer with controllable hot spot was designed and applied to regulate surface plasmon coupling electrochemiluminescence (SPC-ECL) polarization sensing system. The heterodimer nanostructure consisted of individual Au-Ag core-shell nanocubes (Au@Ag NC) and Au nanospheres (Au NS), which were precisely assembled by thiol-DNA and biotin-streptavidin. The asymmetric nanostructure can significantly modulate the ECL intensity and emission polarization angle based on the synergy of the surface plasmon coupling (SPC) effect and the lightning rod effect with extraordinary field enhancement in the hot spot region. As a result, the isotropic ECL signal of zinc-doped nitrogen dots (Zn-N dots) was regulated in the directional emission. Furthermore, the SPC-ECL biosensor was successfully applied to detect miRNA-182 in triple-negative breast cancer (TNBC) tissues. The research on the established relationship between ECL polarization analysis and plasmonic heterodimers can provide a new pathway for the development of ECL sensing platforms.

Plasmonic-enhanced efficiency of AlGaN-based deep ultraviolet LED by graphene/Al nanoparticles/graphene hybrid structure.

The AlGaN-based deep ultraviolet light-emitting diode (DUV LED) has advantages of environmentally friendly materials, tunable emission wavelength, and easy miniaturization. However, the light extraction efficiency (LEE) of an AlGaN-based DUV LED is low, which hinders its applications. Here, we design a graphene/Al nanoparticles/graphene (Gra/Al NPs/Gra) hybrid plasmonic structure, where the strong resonant coupling of local surface plasmons (LSPs) induces a 2.9-times enhancement for the LEE of the DUV LED according to the photoluminescence (PL). The dewetting of Al NPs on a graphene layer by annealing is optimized, resulting in better formation and uniform distribution. The near-field coupling of Gra/Al NPs/Gra is enhanced via charge transfer among graphene and Al NPs. In addition, the skin depth increment results in more excitons being coupled out of multiple quantum wells (MQWs). An enhanced mechanism is proposed, revealing that the Gra/metal NPs/Gra offers a reliable strategy for improving the optoelectronic device performance, which might trigger the advances of LEDs and lasers with high brightness and power density.

P‐173: Late‐News Poster: Composite Cavity Design for Long Lifetime and Low Cost Organic Light‐Emitting Diodes Displays

Traditional way to upgrade the stability and current efficiency performance of OLED device is seeking for new generation of electroluminescent materials. We provide a composite cavity design for longer lifetime, lower cost, and equivalent luminance by using the same materials. It consists of two first‐order red and green cavities and a second‐order blue cavity, which means different optical thickness of the RGB micro cavities. Due to the shorter distance between emitting molecules and metal electrodes, 1st order cavity obtains longer lifetime by surface plasmon coupling. A 52.7% improvement of calculated white lifetime can be accomplished with a respective 89.1% and 54.9% longer lifetime of red and green devices. 1/3 even more organic materials can be saved. Less angular luminance decay and lower working voltage are also demonstrated in the experimental part.

Surface plasmonic coupling of Au nanoparticle arrays with ultrathin hexagonal boron nitride nanosheets for Raman enhancement.

Integration of hexagonal boron nitride (h-BN) with plasmonic nanostructures that possess nanoscale field confinement will enable unusual properties; hence, the manipulation and understanding of the light interactions are highly desirable. Here, we demonstrate the surface plasmonic coupling of Au nanoparticles (ANPs) with ultrathin h-BN nanosheets (BNNS) in nonspecific nanocomposites leading to a great enhancement of the Raman signal of E2g in both experimental and theoretical manner. The nanocomposites were fabricated from liquid-exfoliated atomically thin BNNS and diblock copolymer-based ANPs with excellent dispersion through a self-assembly approach. By precisely varying the size of ANPs from 3 to 9nm, the Raman signal of BNNS was improved from 1.7 to 71. In addition, the underlying mechanism has been explored from the aspects of electromagnetic field coupling strength between the localized surface plasmons excited from ANPs and the surrounding dielectric h-BN layers, as well as the charge transfer at the BNNS/ANPs interfaces. Moreover, we also demonstrate its capability to detect dye molecules as a surface enhanced Raman scattering (SERS) substrate. This work provides a basis for the self-assembly of BNNS hierarchical nanocomposites allowing for plasmon-mediated modulation of their optoelectronic properties, thereby showing the great potential not only in the field of SERS but also in large-scale h-BN-based plasmonic devices.

Thermosensitive Plasmonic Color Enabled by Sodium Metasurface

AbstractActive plasmonic nanostructures have attracted tremendous interest in nanophotonics and metamaterials owing to the dynamically switchable capabilities of plasmonic resonances. In this study, tunable hybrid plasmon resonances (HPR) of sodium metasurfaces through heat‐initiated structural transformation is experimentally demonstrated. A HPR is formed by coupling surface plasmon polaritons (SPP) and gap plasmon resonances (GPR), whose resonant wavelengths are highly sensitive to gaseous nanogaps. By carefully manipulating the thermo‐assisted spin‐coating process and post‐thermal treatment, tuning of the HPR is achieved because of the phase transition between the antidome and nanodome structural profiles of liquid sodium inside the patterned fused silica substrates. Furthermore, the figure of merit of the heat initiated variable structure‐spectrum is demonstrated that is highly dependent on the size of the substrate patterns, based on which temperature‐sensitive plasmonic color and “invisible ink” of sodium metasurfaces are demonstrated. These findings can lead to new solutions for manipulating low‐cost and high‐performance active plasmonic devices.

Strong coupling of localized surface plasmons and intermolecular vibration mode at terahertz frequencies

Organic molecular vibrations, typically occurring in the terahertz (THz) regime, can resonate with a metastructure. A hallmark Rabi splitting occurs when the coupling strength is sufficiently strong. In this work, we observe the strong coupling of localized surface plasmons (LSPs) and intermolecular vibration mode at THz on a metasurface spin-coated with organic molecule α-lactose monohydrate. Excited by transverse-electric THz waves, dispersive localized surface plasmons interact with nondispersive intermolecular vibrations and form two vibro-polariton modes. The angle-resolved transmission spectra of the coupled system are detected by using a terahertz time-domain spectrometer, demonstrating an anti-crossing effect with a clear Rabi splitting. By retrieving the coupling strength and Hopfield coefficients of polariton bands from the measured data, we further verify that these two bands originate from the strong coupling between LSPs and molecular vibration mode. Moreover, we show that it is possible to implement molecular concentration sensing based on this strong coupling effect. This study demonstrates a unique approach to investigate vibro-polaritons at the terahertz regime and provides a testbed for future applications of strong coupling effects in chemical detection and biosensing.

Surface plasmon coupling effects on the photon color conversion behaviors of colloidal quantum dots in a GaN nanoscale hole with a nearby quantum-well structure.

To improve color conversion performance for color display application, we study the near-field-induced nanoscale-cavity effects on the emission efficiency and Förster resonance energy transfer (FRET) under the condition of surface plasmon (SP) coupling by inserting colloidal quantum dots (QDs) and synthesized Ag nanoparticles (NPs) into surface nano-holes fabricated on a GaN template and an InGaN/GaN quantum-well (QW) template. In the QW template, the inserted Ag NPs are close to either QWs or QDs for producing three-body SP coupling to enhance color conversion. Time-resolved and continuous-wave photoluminescence (PL) behaviors of the QW- and QD-emitting lights are investigated. The comparison between the nano-hole samples and the reference samples of surface QD/Ag NP shows that the nanoscale-cavity effect of the nano-hole leads to the enhancements of QD emission, FRET between QDs, and FRET from QW into QD. The SP coupling induced by the inserted Ag NPs can enhance the QD emission and FRET from QW into QD. Its result is further enhanced through the nanoscale-cavity effect. The relative continuous-wave PL intensities among different color components also show the similar behaviors. By introducing SP coupling to a color conversion device with the FRET process in a nanoscale cavity structure, we can significantly improve the color conversion efficiency. Simulation results confirm the basic observations in experiment.

Emission peak shifted incoherent random laser through the combined effects of coupling of surface plasmons in a triangular shaped silver nanostructure, microbubbles, and the waveguiding mechanism

The random laser (RL) is now becoming an essential tool for various photonics applications, and a plethora of research advancements in RL coupled with developments in the field of techniques of syntheses of various nanostructured materials is taking place. But the realization of tuning the peak emission wavelength of RL is still very challenging. However, in this report we have demonstrated an emission peak shifted tunable low threshold incoherent RL in the visible region in a gain medium of a commercially available dye laser material and by employing the rarely used scatterer materials of triangular silver nanoparticles (TSN), microbubbles, and the waveguiding mechanism. The scattering properties of trapped microbubbles, along with the localized surface plasmon resonance property of TSN of appropriate concentration within waveguided thin films composed of glass substrates, have been methodically investigated to demonstrate the reduction in lasing threshold and tunability in the peak emission wavelength. A two-fold reduction in RL threshold by addition of TSN in the disordered system, along with a considerable narrowing down of the emission spectra to a few nanometers, are obtained. Furthermore, the peak emission wavelength shift of 6 nm is reported by suitably changing the system configuration by the addition of an optimum concentration of TSN along with trapped microbubbles. The as-developed system shows high-quality laser performance with the maximum value of η=0.64, a quantity describing the ratio of the number of stimulated radiative photons within RL and the total number of emissive photons. We propose that the total internal reflections from the microbubble surface, along with plasmonic enhancement and scattering from the TSN, mediate the waveguided RL to achieve the low threshold. Therefore, this report is an early step towards demonstrating efficient RL in a ternary scattering system. Many more avenues for investigating this developing research issue may be helpful for the future development of affordable and robust optoelectronic devices.

Third-order nonlinearity with subradiance dark-state in ultra-strong excitons and surface plasmon coupling using self-antiaggregation organic dye

A strong coupling regime with dressed states is formed when a propagating surface plasmon (PSP) mode coherently exchanges energy with an ensemble of excitons at a rate faster than the system’s losses. These states are superpositions of superradiance excitons and PSP modes, accompanied by remaining subradiance or ‘dark’ exciton states. Dark-states are ubiquitous, especially in disordered systems, and they rise in number as the number of excitons increases. Here, the ultra-strong coupling regime was experimentally observed with the coupling strength to bare energy as high as g/∼ 0.23 using a self-antiaggregation organic dye, BOBzBT2 in an Otto-SPR configuration. We show that the hybrid system of excitons in a nonlinear organic dye layer and a PSP mode can be described by employing dark-state in a theory of nonlinear third-order sum-frequency generation (TSFG). Close agreement between the theory and the experiment has been demonstrated. The study opens up a new perspective for establishing a relationship between the optical properties of a third-order nonlinear material and the extent of strong coupling.

Emergence of tunable intersubband-plasmon-polaritons in graphene superlattices

On-demand modification of the electronic band structures of high-mobility two-dimensional (2D) materials is of great interest for various applications that require rapid tuning of electrical and optical responses of solid-state devices. Although electrically tunable superlattice (SL) potentials have been proposed for band structure engineering of the Dirac electrons in graphene, the ultimate goal of engineering emergent quasiparticle excitations that can hybridize with light has not been achieved. We show that an extreme modulation of one-dimensional (1D) SL potentials in monolayer graphene produces ladder-like electronic energy levels near the Fermi surface, resulting in optical conductivity dominated by intersubband transitions (ISBTs). A specific and experimentally realizable platform comprising hBN-encapsulated graphene on top of a 1D periodic metagate and a second unpatterned gate is shown to produce strongly modulated electrostatic potentials. We find that Dirac electrons with large momenta perpendicular to the modulation direction are waveguided via total internal reflections off the electrostatic potential, resulting in flat subbands with nearly equispaced energy levels. The predicted ultrastrong coupling of surface plasmons to electrically controlled ISBTs is responsible for emergent polaritonic quasiparticles that can be optically probed. Our study opens an avenue for exploring emergent polaritons in 2D materials with gate-tunable electronic band structures.