Surface Modification Of Liposomes Research Articles

Preparation, characterization, in vitro and in vivo studies of liposomal berberine using novel natural Fiber Interlaced Liposomal technology

Berberine hydrochloride (BBR), used in various traditional medicinal practices, has a variety of pharmacological effects. It is a plant-derived quaternary isoquinoline alkaloid with a low water solubility and can be used in the treatment of various conditions. However, the therapeutic use of BBR has been compromised because of its hydrophobic characteristics, in addition to its low stability and poor bioavailability. To overcome these drawbacks of BBR’s oral bioavailability, technologies like liposomal delivery systems have been developed to ensure enhanced absorption. But conventional liposomes have low physical and chemical stability due to delicate liposomal membranes, peroxidation and rapid clearance from the bloodstream. Surface modification of liposomes could be a solution and creating a liposome with plant-based fibers as surface material will provide enhanced stability, aqueous solubility and protection against degradation. Consequently, the aim of this study is to create and describe a Fiber Interlaced Liposome™ (FIL) as a vehicle for an enhanced bioavailability platform for BBR and other biomolecules. This optimised FIL-BBR formulation was analysed for its structural and surface morphological characteristics by using FTIR, SEM, TEM, XRD, zeta potential and DSC. Encapsulation efficiency, stability, and sustained release studies using an in vitro digestion model with simulated gastric and intestinal fluids were also examined. FIL formulation showed a sustained release of BBR at 59.03 % as compared to the unformulated control (46.73 %) after 8 h of dialysis. Furthermore, the FIL-BBR demonstrated enhanced stability in the simulated gastric fluid (SGF) in addition to a more sustained release in the simulated intestinal fluid (SIF). The efficacy of FIL-BBR were further anlaysed by an in vivo bioavailability study using male Wistar rats and it demonstrated a 3.37−fold higher relative oral bioavailability compared to the unformulated BBR. The AUC 0-t for BBR in FIL-BBR was 1.38 ng.h/mL, significantly greater than the unformulated BBR (0.41 ng.h/mL). Similarly, the Cmax for BBR in FIL-BBR (50.98 ng/mL) was discovered to be far greater than unformulated BBR (15.54 ng/mL) after the oral administration. These findings imply that fruit fiber based liposomal encapsulation improves the stability and slows down BBR release, which could be advantageous for applications requiring a higher bioavailability and a more sustained release.

Long circulating liposomal platform utilizing hydrophilic polymer-based surface modification: preparation, characterisation, and biological evaluation

Liposomes are one of the most important drug delivery vectors, nowadays used in clinics. In general, polyethylene glycol (PEG) is used to ensure the stealth properties of the liposomes. Here, we have employed hydrophilic, biocompatible and highly non-fouling N-(2-hydroxypropyl) methacrylamide (HPMA)-based copolymers containing hydrophobic cholesterol anchors for the surface modification of liposomes, which were prepared by the method of lipid film hydration and extrusion through 100 nm polycarbonate filters. Efficient surface modification of liposomes was confirmed by transmission electron microscopy, atomic force microscopy, and gradient ultracentrifugation. The ability of long-term circulation in the vascular bed was demonstrated in rabbits after i.v. application of fluorescently labelled liposomes. Compared to PEGylated liposomes, HPMA-based copolymer-modified liposomes did not induce specific antibody formation and did not activate murine and human complement. Compared with PEGylated liposomes, HPMA-based copolymer-modified liposomes showed a better long-circulating effect after repeated administration. HPMA-based copolymer-modified liposomes thus represent suitable new candidates for a generation of safer and improved liposomal drug delivery platforms.

Advancing Therapeutics with Liposomal Drug Design: Harnessing the Potential of Liposomes for Targeted Drug Delivery

Liposomal drug design has emerged as a promising approach for targeted drug delivery. This article provides an overview of the principles and strategies involved in liposomal drug design, focusing on optimizing drug stability, controlled release, and enhanced therapeutic outcomes. The composition of liposomes, including the selection of lipids, plays a crucial role in determining their properties. Size and surface modifications of liposomes enable targeted drug delivery to specific tissues or cells. Liposomes offer versatility in drug encapsulation and controlled release kinetics, improving therapeutic efficacy while minimizing side effects. Incorporating targeting ligands onto liposome surfaces enhances their affinity for diseased sites, allowing for selective drug accumulation. Stability and manufacturing considerations are vital for the successful translation of liposomal drug delivery systems. Overall, liposomal drug design holds significant potential in revolutionizing drug delivery for improved treatment outcomes.

Specific surface modification of liposomes for gut targeting of food bioactive agents.

Liposomes have become a research hotspot in recent years as food delivery systems with attractive properties, including the bilayer structure assembled like the cell membrane, reducing the side-effect and improving environmental stability of cargos, controlling release, extending duration of functional ingredients, and high biodegradable and biocompatible abilities in the body. However, the conventional liposomes lack stability during storage and are weak in targeted absorption in the gastrointestinal track.At present, surface modification has been approved to be an effective platform to shield these barricades and help liposomes deliver the agents safely and effectively to the ideal site. In this review, the gastrointestinal stability of conventional liposomes, cargo release models from liposomes, and the biological fate of the core materials after release were emphasized. Then, the strategies in both physical and chemical perspectives to improve the stability and utilization of liposomes in the gastrointestinal tract, and the emerging approaches for improving gut targeting by specifically modified liposomes and the intestinal receptors relative to liposomes/cargos absorption were highlighted. Last but not the least, the safety, challenges, and opportunities for the improvement of liposomal bioavailability were also discussed to inspire new applications of liposomes as oral carriers.

Impact of spontaneous liposome modification with phospholipid polymer-lipid conjugates on protein interactions

ABSTRACT Liposome surface coating has been studied to avoid the immunological responses caused by the complement system, and alternative materials to poly(ethylene glycol) (PEG) have been explored recently since the production of anti-PEG IgM antibodies has been found in humans. We previously reported a liposome coating with poly(2-methacryloyloxyethyl phosphorylcholine) (poly(MPC))-conjugated lipids (PMPC-lipids) and demonstrated its protective effect on blood protein interactions. Here, we attempted to modify the liposome surface by exogenously adding PMPC-lipids, which were spontaneously incorporated into the outer membrane via hydrophobic interactions. The polymerization degree of the PMPC segment was regulated from 10 to 100. The incorporated ratio of PMPC-lipid increased with a decrease in the degree of PMPC polymerization. Due to surface modification with PMPC-lipids, increase in the length of the PMPC-chain increased the size of the liposomes. The modified liposomes were kept stable for 14 d in terms of their size, polydispersity, and surface properties, where approximately 70% of PMPC-lipids were incorporated into the liposome surface. We demonstrated that liposome surface modification with PMPC-lipids can inhibit protein adsorption when exposed to serum, regardless of the degree of polymerization of PMPC. In addition, the PMPC-lipid modified surface was not recognized by the anti-PEG IgM antibody, whereas PEG-lipid was recognized by the antibody. Thus, we successfully fabricated an inert liposome surface via spontaneous modification with PMPC-lipids, where only the outer bilayer surface was modified. This technique can be available for full loading of water-soluble active pharmaceutical ingredient inside the modified liposome.

Preparation and characterization of phosphatidyl-agar oligosaccharide liposomes for astaxanthin encapsulation

Surface modification of liposomes is an effective way to maintain the physicochemical activity of encapsulated substances. A novel astaxanthin (Ast)-based vesicle carrier system, namely, phosphatidyl-agar oligosaccharide (Ptd-AOS) liposomes (Lip), was prepared to improve the structural stability and in vitro digestibility of astaxanthin. During the transphosphatidylation reaction of synthesizing Ptd-AOS from phosphatidylcholine (PC) and AOS with different degrees of polymerization, phosphatidyl galactose (Ptd-Gal) and phosphatidyl neoagarobiose (Ptd-NA2) showed higher yields (85 and 96%, respectively). In terms of morphology, modified liposomes exhibited smaller particle sizes and more uniform dispersion compared with PC-Ast-Lip. In addition, the astaxanthin in the modified liposomes showed enhanced stability during liposome characterization and in vitro digestion. The transformations of astaxanthin in the modified liposomes were distributed in the range of 57–74% compared with free astaxanthin (25%). These findings suggest that the modification of liposomes by Ptd-AOS has potential applications in the delivery of functional ingredients.

Recent Advances in Oral Peptide or Protein-Based Drug Liposomes.

The high physiology and low toxicity of therapeutic peptides and proteins have made them a hot spot for drug development in recent years. However, their poor oral bioavailability and unstable metabolism make their clinical application difficult. The bilayer membrane of liposomes provides protection for the drug within the compartment, and their high biocompatibility makes the drug more easily absorbed by the body. However, phospholipids—which form the membranes—are subjected to various digestive enzymes and mucosal adhesion in the digestive tract and disintegrate before absorption. Improvements in the composition of liposomes or modifying their surface can enhance the stability of the liposomes in the gastrointestinal tract. This article reviews the basic strategies for liposome preparation and surface modification that promote the oral administration of therapeutic polypeptides.

Effect of liposome surface modification with water-soluble phospholipid polymer chain-conjugated lipids on interaction with human plasma proteins.

Alternative liposome surface coatings for PEGylation to evade the immune system, particularly the complement system, have garnered significant interest. We previously reported poly(2-methacryloyloxyethyl phosphorylcholine) (MPC)-based lipids (PMPC-lipids) and investigated the surface modification of liposomes. In this study, we synthesize PMPC-lipids with polymerization degrees of 10 (MPC10-lipid), 20 (MPC20-lipid), 50 (MPC50-lipid), and 100 (MPC100-lipid), and coated liposomes with 1, 5, or 10 mol% PMPC-lipids (PMPC-liposomes). Non-modified and PEGylated liposomes are used as controls. We investigate the liposome size, surface charge, polydispersity index, and adsorption of plasma proteins to the liposomes post incubation in human plasma containing N,N,N',N'-ethylenediamine tetraacetic acid (EDTA) or lepirudin by some methods such as sodium dodecyl sulphate-polyacrylamide gel electrophoresis (SDS-PAGE), western blotting, and automated capillary western blot, with emphasis on the binding of complement protein C3. It is shown that the coating of liposome PMPC-lipids can suppress protein adsorption more effectively with an increase in the molecular weight and molar ratio (1-10 mol%). Apolipoprotein A-I is detected on PMPC-liposomes with a higher molecular weight and higher molar ratio of PMPC-lipids, whereas α2-macroglobulin is detected on non-modified, PEGylated, and PMPC-liposomes with a shorter polymer chain. In addition, a correlation is shown among the PMPC molecular weight, molar ratio, and C3 binding. The MPC10-lipid cannot inhibit C3 binding efficiently, whereas surface modifications with 10 mol% MPC20-lipid and 5 mol% and 10 mol% MPC50-lipid suppress both total protein and C3 binding. Hence, liposome modification with PMPC-lipids can be a possible strategy for avoiding complement activation.

Liposome based drug delivery as a potential treatment option for Alzheimer's disease.

Alzheimer’s disease is a neurodegenerative condition leading to atrophy of the brain and robbing nearly 5.8 million individuals in the United States age 65 and older of their cognitive functions. Alzheimer’s disease is associated with dementia and a progressive decline in memory, thinking, and social skills, eventually leading to a point that the individual can no longer perform daily activities independently. Currently available drugs on the market temporarily alleviate the symptoms, however, they are not successful in slowing down the progression of Alzheimer’s disease. Treatment and cures have been constricted due to the difficulty of drug delivery to the blood-brain barrier. Several studies have led to identification of vesicles to transport the necessary drugs through the blood-brain barrier that would typically not achieve the targeted area through systemic delivered medications. Recently, liposomes have emerged as a viable drug delivery agent to transport drugs that are not able to cross the blood-brain barrier. Liposomes are being used as a component of nanoparticle drug delivery; due to their biocompatible nature; and possessing the capability to carry both lipophilic and hydrophilic therapeutic agents across the blood brain barrier into the brain cells. Studies indicate the importance of liposomal based drug delivery in treatment of neurodegenerative disorders. The idea is to encapsulate the drugs inside the properly engineered liposome to generate a response of treatment. Liposomes are engineered to target specific diseased moieties and also several surface modifications of liposomes are under research to create a clinical path to the management of Alzheimer’s disease. This review deals with Alzheimer’s disease and emphasize on challenges associated with drug delivery to the brain, and how liposomal drug delivery can play an important role as a drug delivery method for the treatment of Alzheimer’s disease. This review also sheds some light on variation of liposomes. Additionally, it emphasizes on the liposomal formulations which are currently researched or used for treatment of Alzheimer’s disease and also discusses the future prospect of liposomal based drug delivery in Alzheimer’s disease.

Azadiradione-loaded liposomes with improved bioavailability and anticancer efficacy against triple negative breast cancer

Triple negative breast cancer (TNBC) is the most aggressive subtype of the breast cancer commonly occurring in females. It was estimated that around 17%–25% of people with breast cancer are triple negative. Despite the availability of various therapeutics and approaches for breast cancer treatment, there is still an increasing need to develop safe and efficacious agents for cancer therapy. Azadiradione (AZD), a bioactive agent isolated from Azadiractaindica, is known to possess anti-nociceptive and anti-inflammatory activities. However, AZD use is limited due to its poor bioavailability. In the current study, the bioavailability of AZD-loaded liposomes in mice was investigated. The anticancer efficacy of AZD-loaded liposomes against TNBC cell line (MDA-MB-231) was also assessed. Data have shown that the oral bioavailability of AZD from liposomes was significantly higher in comparison to free AZD. Also, the anticancer activity of AZD-loaded liposomes against TNBC cells in vitro was markedly enhanced and was found to be via down regulation of the proteins required for proliferation, survival and angiogenesis such as cyclin D1, COX-2, survivin, VEGF-A and autophagy. In conclusion, this study suggested that AZD-loaded liposomes might be a potential oral delivery system to improve bioavailability and hence, therapeutic efficacy of AZD. However, further surface modification of AZD liposomes via PEGylation is required to increase drug blood circulation and reduce phagocytosis and uptake by RES.

Synthesis of Triphenylphosphonium Phospholipid Conjugates for the Preparation of Mitochondriotropic Liposomes.

Surface modification of liposomes with a ligand is facilitated by the conjugation of the ligand to a hydrophobic molecule that serves to anchor the ligand to the liposomal bilayer. We describe here a simple protocol to conjugate a triphenylphosphonium group to several commercially available functionalized phospholipids. The resulting triphenylphosphonium-conjugated lipids can be used to prepare liposomes that preferentially associate with mitochondria when exposed to live mammalian cells in culture.

Synthesis of poly(2-methacryloyloxyethyl phosphorylcholine)-conjugated lipids and their characterization and surface properties of modified liposomes for protein interactions.

Poly(ethylene glycol) (PEG) is frequently used for liposomal surface modification. However, as PEGylated liposomes are cleared rapidly from circulation upon repeated injections, substitutes of PEG are being sought. We focused on a water-soluble polymer composed of 2-methacryloyloxyethyl phosphorylcholine (MPC) units, and synthesized poly(MPC) (PMPC)-conjugated lipid (PMPC-lipid) with degrees of MPC polymerization ranging from 10 to 100 (calculated molecular weight: 3 to 30 kDa). In addition, lipids with three different alkyl chains, myristoyl, palmitoyl, and stearoyl, were applied for liposomal surface coating. We studied the interactions of PMPC-lipids with plasma albumin, human complement protein C3 and fibrinogen using a quartz crystal microbalance with energy dissipation, and found that adsorption of albumin, C3 and fibrinogen could be suppressed by coating with PMPC-lipids. In particular, the effect was more pronounced for PMPC chains with higher molecular weight. We evaluated the size, polydispersity index, surface charge, and membrane fluidity of the PMPC-lipid-modified liposomes. We found that the effect of the coating on the dispersion stability was maintained over a long period (98 days). Furthermore, we also demonstrated that the anti-PEG antibody did not interact with PMPC-lipids. Thus, our findings suggest that PMPC-lipids can be used for liposomal coating.

Liposomal doxorubicin as targeted delivery platform: Current trends in surface functionalization.

Liposomal delivery systems have significantly enhanced the efficacy and safety of chemotherapeutic agents compared to free (non-liposomal) formulations. Liposomes are vesicles made up of lipophilic bilayer and a hydrophilic core which provides perfect opportunity for their application as transport vehicle for various therapeutic and diagnostic agents. Doxorubicin is the most exploited chemotherapeutic agent for evaluation of different liposomal applications, as its physicochemical properties permit high drug entrapment and easy remote loading in pre-formulated liposomes. Pegylated liposomal doxorubicin clinically approved and, on the market, Doxil®, exemplifies the benefits offered upon the surface modification of liposome with polyethylene glycol. This unique formulation prolonged the drug residence time in the circulation and increased accumulation of doxorubicin in tumor tissue via passive targeting (enhanced permeability and retention effect). However, there is ample scope for further improvement in the efficiency of targeting tumors by coupling biological active ligands onto the liposome surface to generate intelligent drug delivery systems. Small biomolecules such as peptides, fraction of antibodies and carbohydrates have the potential to target receptors present on the surface of the malignant cells. Hence, active targeting of malignant cells using functionalised nanocarrier (liposomes encapsulated with doxorubicin) have been attempted which is reviewed in this article.

An Underestimated Factor: The Extent of Cross-Reactions Modifying APIs in Surface-Modified Liposomal Preparations Caused by Comprised Activated Lipids.

Despite the nowadays available plentitude of strategies to selectively introduce functional surface modification of liposomes, in preclinical research this process is still primarily performed after liposomal preparation utilizing comprised activated phospholipids with functionalized head groups. However, because these activated lipids are present during the liposomal preparation process, they can cross-react with incorporated drugs, especially the particularly often utilized active esters and maleimide groups. Macromolecular drugs, being composed of amino acids, are particularly prone to such cross-reactions due to their often multiple reactive functionalities such as amino and disulfide groups. To demonstrate this impact on the formulation in liposomal surface modification, we assessed the extent of cross-reaction during the liposomal preparation of two activated phospholipids with typically used head group functionalized phospholipids, with the two peptide drugs vancomycin and insulin comprising disulfide and amino functionalities. Both drugs revealed a considerable fraction of covalent modification (estimated 2 to 12%) generated during the liposome preparation process with comprised activated lipids. Modification of the active pharmaceutical ingredients (APIs) was determined by high-resolution mass spectrometric analysis. These findings clearly demonstrate the non-negligibility of potential cross reactions using the post preparation liposomal surface modification strategy in preclinical research.

The Blood-Brain Barrier Cell-Targeted Gene Delivery System to Enhance Nerve Growth Factor Protein Secretion in the Brain.

The enhanced permeability efficiencies still remain a big challenge in crossing the blood-brain barrier (BBB). Herein, a BBB-targeting delivery system based on transferrin (Tf)-poly(ethylene glycol) (PEG) PEGylated-cationic liposome was prepared for delivering the protamine labeled nerve growth factor (NGF) gene. The nanoparticle (TLDP) could preferentially accumulate into the BBB by receptor-mediated transcytosis via the Tf receptor present on cerebral endothelial cells. The polyplex showed good encapsulation of the NGF gene as well as triggered corresponding protein release in the BBB. Surface modification of liposomes with PEG imparts a steric barrier to the NPs that decreases their recognition and clearance by the reticuloendothelial system for increasing the circulation time, and cationic liposomes with protamine are indicated with nuclear localization function to improve the efficiency of nucleus localization and gene expression. The polyplex at a DOTAP/DNA ratio of 3 showed an appropriate diameter, desired serum stability, and much higher encapsulation efficiency. The polyplex had no cytotoxicity against cells. The cell uptake of the TLDP was stronger than other groups without transferrin, which suggested that the TLDP could successfully deliver the NGF gene to the BBB cell and enhanced the expression and secretion of the NGF protein in the brain. In vivo imaging further verified that the TLDP exhibited a higher brain distribution than other groups. Consequently, these findings showed that BBB cells as the "transit station" is a promising method to overcome the BBB and increase the concentration of drug in the brain.

Surface Modification of Liposomes Using IR700 Enables Efficient Controlled Contents Release Triggered by Near-IR Light.

Stimuli-responsive liposomes are promising drug carriers for cancer treatment because they enable controlled drug release and the maintenance of desired drug concentrations in tumor tissue. In particular, near-IR (NIR) light is a useful stimulus for triggering drug release from liposomes based on its advantages such as deep tissue penetration and safety. Previously, we found that a silicon phthalocyanine derivative, IR700, conjugated to antibodies, can induce the rupture of the cell membrane following irradiation by NIR light. Based on this finding, we constructed IR700-modified liposomes (IR700 liposomes) and evaluated their drug release properties triggered by NIR light. IR700 liposomes released substantial amounts of encapsulated calcein following irradiation by NIR light. Drug release was substantially suppressed by the addition of sodium azide, suggesting that liposomal membrane permeabilization was mediated by singlet oxygen generated from IR700. Moreover, calcein release from IR700 liposomes triggered by NIR light was promoted under conditions of deoxygenation and the presence of electron donors. Thus, membrane disruption should be induced by the physical change of IR700 from highly hydrophilic to hydrophobic as we previously described, although singlet oxygen can cause a certain level of membrane disruption under normoxia. We also observed that doxorubicin-encapsulated IR700 liposomes exhibited significant cytotoxic effects against CT-26 murine colon carcinoma cells following NIR light exposure. These results indicate that IR700 liposomes can efficiently release anti-cancer drugs following NIR light irradiation even under hypoxic conditions and, therefore, they would be useful for cancer treatment.

Recent strategies towards the surface modification of liposomes: an innovative approach for different clinical applications.

Liposomes are very useful biocompatible tools used in diverse scientific disciplines, employed for the vehiculation and delivery of lipophilic, ampiphilic or hydrophilic compounds. Liposomes have gained the importance as drug carriers, as the drugs alone have limited targets, higher toxicity and develop resistance when used in higher doses. Conventional liposomes suffer from several drawbacks like encapsulation inefficiencies and partially controlled particle size. The surface chemistry of liposome technology started from simple conventional vesicles to second generation liposomes by modulating their lipid composition and surface with different ligands. Introduction of polyethylene glycol to lipid anchor was the first innovative strategy which increased circulation time, delayed clearance and opsonin resistance. PEGylated liposomes have been found to possess higher drug loading capacity up to 90% or more and some drugs like CPX-1 encapsuled in such liposomes have increased the disease control up to 73% patients suffering from colorectal cancer. The surface of liposomes have been further liganded with small molecules, vitamins, carbohydrates, peptides, proteins, antibodies, aptamers and enzymes. These advanced liposomes exhibit greater solubility, higher stability, long-circulating time and specific drug targeting properties. The immense utility and demand of surface modified liposomes in different areas have led their way to the modern market. In addition to this, the multi-drug carrier approach of targeted liposomes is an innovative method to overcome drug resistance while treating ceratin tumors. Presently, several second-generation liposomal formulations of different anticancer drugs are at various stages of clinical trials. This review article summarizes briefly the preparation of liposomes, strategies of disease targeting and exclusively the surface modifications with different entities and their clinical applications especially as drug delivery system.

Liposome-based nanocarrier loaded with a new quinoxaline derivative for the treatment of cutaneous leishmaniasis.

The use of nanocarriers for drug delivery is a strategy aimed to improve therapeutic indices through changes in their pharmacokinetic and pharmacodynamic characteristics. Liposomes are well-investigated nanocarriers for drug delivery to macrophage-targeted therapy, the main hosts of intracellular pathogens of some infectious diseases, such as leishmaniasis. In this study, we developed hyaluronic acid (HA)-coated liposomes by different methods that can encapsulate a new quinoxaline derivative, the LSPN331, to increase its solubility and improve its bioavailability. The surface modification of liposomes and their physicochemical characteristics may depend on the coating method, which may be a critical parameter with regard to the route of administration of the antileishmanial drug. Liposomes with identical phospholipid composition containing the same drug were developed, and different biological responses were verified, and our hypothesis is that it is related to the type of modification of the surface. Different physicochemical characterization techniques (dynamic light scattering, transmission electron microscopy and UV-vis quantification of labeled-HA) were used to confirm the successful modification of liposomes as well as their stability upon storage. The encapsulation of LSPN331 was performed using HPLC method, and the entrapment efficiency (EE%) was satisfatory in all formulations, considering results of similar formulations in the literature. Furthermore, in vitro and in vivo studies were carried out to evaluate the efficacy against the parasite Leishmania amazonensis. The in vitro activity was maintained or even improved and HA-coated liposomes showed the ability to target to the site of action by the proposed routes of administration, topically and intravenously. Both formulations are promising for future tests of antileishmania activity in vivo.

Effect of Glucosamine Conjugate-Functionalized Liposomes on Glioma Cell and Healthy Brain: An Insight for Future Application in Brain Infusion.

Conjugation of D-glucosamine with lipophilic moiety can ease its application in surface modification of liposomes. Interestingly, although D-glucosamine is safe, studies have shed light on "toxic effect" of its conjugates on cancer cells and highlighted its application in targeting glioma. However, understanding the safety of such conjugates for local delivery to the brain is unavailable. Herein, after successful synthesis of D-glucosamine conjugate (GC), the toxicity of functionalized liposome was evaluated both in vitro and in vivo. The study revealed a significant effect on cytotoxicity and apoptosis in vitro as assessed on grade IV-resistant glioma cell lines, SF268, U87MG, using MTT assay and PI staining. Additionally, this effect was not observed on normal human erythrocytes in the hemolysis assay. Furthermore, we demonstrated that GC liposomes were non-toxic to the normal brain tissues of healthy Sprague-Dawley rats. Successful functionalization yielded liposome with uniform particle size, stability, and cellular uptake. With < 10% hemolysis, all the liposomal formulations demonstrated hemato-compatibility but led to high glioma cytotoxicity. The surface density of conjugate played an important role in tumor toxicity (0.5 < 1.0 ≤ 2.0% molar ratio). PI staining revealed that compared to control cell, functionalization led 26-fold increase in induction of apoptosis in glioma cells. Absence of histological and behavioral changes along with the absence of caspase-3 in brain tissue confirmed the suitability of the system for direct infusion in the brain. Thus, this study will aid the future development of clinically useful local chemotherapeutic without "add-in" side effects.

Liposomal Formulations for Nose-to-Brain Delivery: Recent Advances and Future Perspectives.

Restricted drug entry to the brain that is closely associated with the existence of the blood brain barrier (BBB) has limited the accessibility of most potential active therapeutic compounds to the brain from the systemic circulation. Recently, evidences for the presence of direct nose-to-brain drug transport pathways have been accumulated by several studies and an intranasal drug administration route has gained attention as a promising way for providing direct access to the brain without the needs to cross to the BBB. Studies aiming for developing nanoparticles as an intranasal drug carrier have shown considerable promise in overcoming the challenges of intranasal drug delivery route. This review gives a comprehensive overview of works having investigated liposomes as a potential vehicle to deliver drugs to the brain through nose-to-brain route while considering the excellent biocompatibility and high potential of liposomes for clinical development. Herein, studies are reviewed with special emphasis on the impact of formulation factors, such as liposome composition and surface modification of liposomes with targeting moieties, in addition to intranasal environmental factors that may affect the extent/site of absorption of intranasally administered, liposome-encapsulated drugs.