Planar Surface Research Articles

Enhanced Modeling for Analysis of Fine Particulate Interactions with Coated Surfaces

The adhesion of Martian surface dust to solar panels has been a longstanding challenge for Mars mission researchers. Anti-dust coatings have been developed to deter the adsorption of dust particles onto these solar panels. However, current ground testing methods struggle to accurately verify and assess the coating’s ability to inhibit dust particle adsorption. Consequently, this paper introduces a computational model capable of calculating the contact force between fine particles and the coated surface. This model, grounded in the classical adhesive elastic interactions paradigm, establishes a normal force solution by approximating the pressure distribution on the contact area between the sphere and the coating, subsequently computing the composite force acting on the particle. Utilizing the API module of the EDEM simulation platform, we conducted simulations of the motion of fine particles on both smooth and coated plates. The results reveal that van der Waals forces are more prominent for light-mass particles, and the application of the coating can diminish the pull of these forces, facilitating easier detachment of dust particles from the plate surface.

Icephobic Gradient Polymer Coatings Deposited via iCVD: A Novel Approach for Icing Control and Mitigation.

Materials against ice formation and accretion are highly desirable for different industrial applications and daily activities affected by icing. Although several concepts have been proposed, no material has so far shown wide-ranging icephobic features, enabling durability and manufacturing on large scales. Herein, we present gradient polymers made of 1,3,5,7-tetravinyl-1,3,5,7-tetramethylcyclotetrasiloxane (V4D4) and 1H,1H,2H,2H-perfluorodecyl acrylate (PFDA) deposited in one step via initiated chemical vapor deposition (iCVD) as an effective coating to mitigate ice accretion and reduce ice adhesion. The gradient structures easily overcome adhesion, stability, and durability issues of traditional fluorinated coatings. The coatings show promising icephobic performance by reducing ice adhesion, depressing the freezing point, delaying drop freezing, and inhibiting ice nucleation and frost propagation. Icephobicity correlates with surface energy discontinuities at the surface plane resulting from the random orientation of the fluorinated groups of PFDA, as confirmed by grazing-incidence X-ray diffraction measurements. The icephobicity could be further improved by tuning the surface crystallinity rather than surface wetting, as samples with random crystal orientation show the lowest ice adhesion despite high contact angle hysteresis. The iCVD-manufactured coatings show promising results, indicating the potential for ice control on larger scales and various applications.

Estimation of defect depth on plates by eddy-current coil array

Eddy-current (EC) testing is one of the contactless nondestructive testing techniques that has been frequently applied to evaluate the defects on metallic objects. In this paper, an estimation method of defect depth on metallic plates is proposed based on the approximate analytical model. An EC coil array sensitive to various defect orientation is designed to scan the plate surface. The independent inductance from various ferrite-core coil pairs can be found by the approximate analytical model. The influence of defect on measurements, including depth and edges, is regarded as the variation of probe lift-off in the tested region, defined as the equivalent lift-off. Based on the approximate analytical model, when defect edges have relatively smaller influence, the defect depth on the plate surface can be approximately obtained by estimating the equivalent probe lift-off through optimization. In numerical simulations and experiments, the proposed method is evaluated by testing the aluminum and stainless-steel plates with cracks by the coil array. The reconstructed equivalent lift-off distribution closely relates to the position and dimensions of defects on plates.

Comparative examination and flow characteristics of magnetohydrodynamic rotative flowing of second-grade liquid between two-oblique plane surfaces

Comparative examination and flow characteristics of magnetohydrodynamic rotative flowing of second-grade liquid between two-oblique plane surfaces

Optical Analysis of Perovskite/Silicon Tandem Solar Cells: Effect of Rear Side Grating and TOPCon Tunnel Junction

In the focus of the presented work is the analysis of a rear side reflection grating in context of a perovskite/silicon tandem solar cell. The typical configuration of a perovskite/Si tandem device requires a hole transport layer at the rear side of the silicon solar cell (p-i-n bottom cell structure). As such a poly-Si passivating contact like TOPCon is an attractive candidate. Until now, research faces the challenge to deposit p-TOPCon layers with good surface passivation properties on textured surfaces. A planar surface would avoid this issue and due to its smaller surface area intrinsically allowing for a better passivation. The optical disadvantage of the planar rear side can be eliminated by an appropriate optical grating at the rear side which enables ideal light trapping. In this work a new approach is developed to describe the optical properties of a diffraction grating as structured rear side reflector in a silicon bottom cell. The light distribution and the parasitic absorption per grating interaction are fitted to reflectance and absorptance measurements of a III-V on silicon triple-junction device with a rear grating structure. Compared to previous models, this new approach makes it possible to reliably quantify the different loss mechanisms in the spectral region above 1000 nm. An application of the simulation model to a perovskite/silicon tandem device shows the potential of the system with rear side grating. In addition, an integration of a TOPCon tunnel junction is evaluated and a process chain for the integration of a structured rear side reflector into the tandem system is discussed.

Radiation-chemical synthesis and characterization of ferrihydrite from iron (III) nitrate

In this study, 2-line ferrihydrite (2L Fh) nanoparticles (NPles)were synthesized by radiation-chemical method from an alcoholic solution of iron (III) nitrate for the first time. The X-ray diffraction analysis confirmed that the synthetic powder exhibited the characteristic pattern of 2L Fh NPles. DSC-TG analysis conducted in air atmosphere further verified the formation of 2L Fh. SEM analysis showed the presence of mesoporous plate-like structures in the 2L Fh powder, consisting of aggregates of NPs with an average size of approximately 20 nm. The absence of impurity peaks on the X-ray diffractograms and energy dispersion spectra (EDX) confirmed the chemical purity of the produced 2L Fh NPles. Additionally, the XPS method detected the presence of nitrogen and carbon adsorbed to the developed surface of the 2L Fh plates. 2L Fh NPles, when dried in air at a temperature of 50 °C, rapidly dissolved in water. 2L Fh NPles alcohol suspensions were stabilized using surfactants polyethylenimine (PEI) and acetylacetone (AcAs). 2L Fh NPles showed good photocatalytic properties when irradiated with ultraviolet light of methyl violet (MV) dye. These 2L Fh NPles, synthesized using an environmentally friendly radiation-chemical method, have immense potential for applications in biomedicine and photocatalysis.

The Influence of Crystal Orientation and Thermal State of a Pure Cu on the Formation of Helium Blisters

The factors that influence the formation of helium blisters in copper were studied, including crystallographic grain orientation and thermomechanical conditions. Helium implantation experiments were conducted at 40 KeV with a dose of 5 × 1017 ions/cm2, and the samples were then subjected to post-implantation heat treatments at 450 °C for different holding times. A scanning electron microscope (SEM) equipped with an electron backscatter diffraction (EBSD) detector was used to analyze the samples, revealing that the degree of blistering erosion and its evolution with time varied with the crystallographic plane of the free surface in different ways in annealed and cold rolled copper. Out of the investigated states, rolled copper with a (111) free surface had superior helium blistering durability. This is explained by the consideration of the multivariable situation, including the role of dislocations and vacancies. For future plasma-facing component (PFC) candidate material, similar research should be conducted in order to find the optimal combination of material properties for helium blistering durability. In the case of Cu selection as a PFC, the two practical approaches to obtain the preferred (111) orientation are cold rolling and thin layer technologies.

Occurrence and formation of clast-free circular depressions in the southern Namib Desert, Tsau ǁKhaeb (Sperrgebiet) National Park, Namibia

Circular depressions are concave, shallow depressions found on planar landscape surfaces in the southern Namib Desert. They occur on gravelly substrates with nearly level to very slightly inclined surfaces. The depressions range from 6 to 10 m in diameter with centers typically depressed 10–20 cm below the level of the surrounding terrain. Locations of individual circular depressions were mapped at one site using ground-based measurements and at three additional sites using Google Earth imagery. At all sites, circular depressions are highly overdispersed with densities ranging from approximately 10–20/ha and corresponding nearest neighbor distances of 17–24 m. Large fragments of weathered calcrete and stones occur on soil surfaces surrounding circular depressions, but not within the depressions. Circular depressions at one site contained active burrow systems of Brants’ whistling rat ( Paratomys brantsii). Bioturbation by these rodents contributes to the non-cohesive nature of the sandy substrate, which promotes aeolian deflation and formation of the depressions. Excavations of the burrow systems by the honey badger ( Mellivora capensis) in search of rodent prey can transfer large stones and calcrete fragments from the subsurface to the surface and subsequently move those materials about the surface. Even if such sequential, horizontal displacements are in random directions, such movements can eventually yield a central, clast-free area surrounded by a peripheral zone where the clasts accumulate once they have been displaced beyond the margin of the area to which the predator is drawn in search of rodent prey. A conceptual model consisting of a two-dimensional random walk of large clasts about the surface until they are displaced from the focal “arena” of rodent occupation provides a novel explanation for origin of a spatially organized pattern that is initiated through the random displacement of those materials. Comparable microtopographic patterning associated with bioturbation in other arid and semi-arid environments may have similar origins.

Investigation of Contact Resistivities on APCVD (p) Poly-Si for Fired Passivating Contacts

We investigate the properties of boron doped polycrystalline Si (poly-Si) deposited by atmospheric pressure chemical vapor deposition (APCVD) applied to fired passivating contacts (FPC), where no high temperature annealing takes place apart from the contact firing step. X-ray diffraction measurements show that the APCVD poly-Si is already partially crystallized directly after deposition and the crystallite size further increases during firing. Without metallization an implied open circuit voltage of up to 719 mV is achieved. Screen-printing with an Ag paste yields minimal contact resistivities of down to 1 mΩcm² at high firing temperatures. Furthermore, thicker poly-Si layers, accomplished by driving the same wafer multiple times through the APCVD system, generally correspond to lower contact resistivities for the FPC. This can partly be explained by an increasing crystallinity and conductivity during deposition due to the higher thermal budget during deposition for thicker layers as well as by a larger contact area for thicker poly-Si layers. Scanning electron microscopy on sample cross-sections show that almost the entire poly-Si layer is covered with Ag crystallites at high firing temperatures. For lower temperatures a lower density of Ag crystallites in the poly-Si is visible. Both findings hold for planar and textured surfaces.

Multi-factor coupled thermal simulation of flat-panel digital PCR structure

To achieve uniform reaction temperature in flat-plate digital polymerase chain reaction (dPCR), we propose a multi-factor coupled thermal simulation method for the structure of flat-plate digital PCR using finite element analysis. This will help us obtain the optimal method for the structure of flat-plate dPCR. Thermal simulations were conducted to analyze the effects of forced air cooling, thermoelectric cooler (TEC) arrangement spacing, and heat-conducting plate thickness on the temperature uniformity of the flat-plate dPCR. The resulting isothermal surfaces and velocity magnitude vectors were used to summarize the impact of each factor. The study found that maintaining a mechanical fan speed of 3000 revolutions per minute (RPM) ±10 % during the heating period resulted in a 29.3 % reduction in the standard deviation of the temperature on the surface of the heat-conducting plate. Additionally, when the TEC spacing was between 2 mm and 3.5 mm, the standard deviation of the temperature on the plate's surface decreased by 87.1 % to 93.4 %. When the thickness of the thermal plate ranges from 3.5 mm to 4.5 mm, the standard deviation of the temperature on the surface of the thermal plate varies by approximately 0.006. The experimental results, obtained by sampling and analyzing the temperature on the surface of the thermal plate, are consistent with the simulation results. This proves that the method is informative in determining the structural parameters of the dPCR to enhance temperature uniformity.

Potential Utilization of Iron Oxidation Reaction Heat for the Generation of SiO2–FeO System Melts

Silicon-containing steel forms an oxide layer within the scale during hot rolling. This layer comprising oxides such as Fe2SiO4 and FeO adversely affect the surface quality of steel owing to strong adhesion between Fe2SiO4 and the steel substrate. A method to melt this silicon-containing oxide layer through the oxidation reaction of iron plates by applying SiO2 powder to the surface is proposed. The aim of this study is to understand the reaction mechanism and identify the optimal conditions for this process. Application of SiO2 coating to the surface of an iron plate at 6.67 × 10–4 g·mm−2 and maintaining the plate at 1423 K, just below the eutectic temperature of Fe2SiO4–FeO system (1450 K), cause the surface oxide scale to melt when exposed to oxidation in an atmospheric environment. Notably, reducing the electric furnace temperature hinders the melting process, whereas excessive application of SiO2 hampers the formation of sufficient liquid phase. On the surface of the iron plate, primarily FeO and Fe2SiO4 are formed. Heat generation is mainly due to the formation of FeO, which leads to the rapid generation of Fe2SiO4. Eutectic reactions within SiO2–Fe2SiO4 or FeO–Fe2SiO4 systems drive the formation of the liquid phase. Once the liquid phase was established, rapid diffusion of iron ions within it resulted in rapid iron oxidation and additional heat generation. Ultimately, a liquid phase in equilibrium with FeO is formed across the entire surface of the iron plate.

Asymptotically correct isoenergetic formulation of geometrically nonlinear anisotropic plates

In the present work, a new displacement-based Equivalent Single Layer (ESL) plate theory has been developed using the Variational Asymptotic Method (VAM) and the principle of isoenergetics. In contrast to the existing assumption-based ESL plate theories, the proposed VAM-based plate theory is devoid of any presuppositions. The VAM decouples the 3D plate problem into a 1D through the thickness analysis and a 2D planar problem. Closed form solutions have been obtained for the 1D problem in terms of 2D displacement variables and their higher-order derivatives. The complexity involving higher-order derivatives of 2D displacement variables has been simplified through the isoenergetic principle ensuring a similar rate of convergence for strains as well as displacements. Solutions for various field variables have been compared against the benchmark problems available in the literature and 3D FEA. These comparisons demonstrate the accuracy, efficiency, and versatility of the present methodology. Key contributions of the present work are (a) First principles-based derivation of the reduced-order 2D plate model from the 3D model energy. (b) The plane stress condition as well as the quadratic variation of transverse shear stress and strain are natural outcomes of the present mathematical framework. (c) This leads to zero tangential traction boundary conditions on the plate surface. (d) The effectiveness of capturing higher-order behavior at lower-order results in simplified analysis, reduced computational complexity and increased efficiency.

Investigation of the hydrodynamic and thermodynamic behavior of the liquid jet quenching process

Liquid jet quenching of metals is typically adopted to achieve specific material properties of metals, thereby making them suitable for advanced engineering applications. In this process, a metal plate is heated and cooled rapidly by impinging water jets. The temperature history during cooling leads to a microstructural transformation thereby improving the material properties such as hardness. During liquid jet quenching, since the plate surface temperature is above the Leidenfrost temperature, the boiling heat transfer dominates. This is associated with an intense cooling and water vapor generation, where the Leidenfrost effect impedes the immediate wetting of the surface. The resulting uneven cooling over the plate surface tends to potential deformation and cracking. To control this process, a detailed understanding of the spatial and the temporal heat transfer behavior is imperative. Experiments in this context are limited and therefore investigating the conjugate heat transfer process is to be combined with a multi-phase numerical model. The two-phase numerical model based on the Euler-Euler approach is developed and validated to simulate the jet quenching of a stationary plate considering all the boiling regimes within a single framework. This model consists of two phases, the liquid water which is the continuous phase (primary) and the water vapor modeled as the dispersed phase (secondary). In this study, a circular water jet (tap water) impact is considered and the plate materials under investigation are aluminum alloy (Al-alloy) and stainless steel (St-steel). Experiments are performed using infrared and high-speed imaging. The validated numerical model provides the technical parameters such as wetting front behavior, heat flux, HTC (heat transfer coefficient) etc. The influence of the jet Reynolds number and the plate material properties on the heat transfer is analysed. The study emphasizes that the plate material has a significantly higher influence on the heat transfer during jet quenching.Graphical abstract

Research on Alternating Current Field Measurement Method for Buried Defects of Titanium Alloy Aircraft Skin.

Titanium alloys are extensively used in the manufacturing of key components in aerospace engines and aircraft structures due to their excellent properties. However, aircraft skins in harsh operating environments are subjected to long-term corrosion and pressure concentrations, which can lead to the formation of cracks and other defects. In this paper, a detection probe is designed based on the principle of alternating current field measurement, which can effectively detect both surface and buried defects in thin-walled titanium alloy plates. A finite element simulation model of alternating current field measurement detection for buried defects in thin-walled TC4 titanium alloy plates is established using COMSOL 5.6 software. The influence of defect length, depth, and excitation frequency on the characteristic signals is investigated, and the detection probe is optimized. Simulation and experimental results demonstrate that the proposed detection probe exhibits high detection sensitivity to varying lengths and depths of buried defects, and can detect small cracks with a length of 3 mm and a burial depth of 2 mm, as well as deep defects with a length of 10 mm and a burial depth of 4 mm. The feasibility of this probe for detecting buried defects in titanium alloy aircraft skin is confirmed.

Medial surface plating of posterior column through the anterior intrapelvic approach in acetabulum fractures with involvement of both columns.

Posterior column plating through the single anterior approach reduces the morbidity in acetabular fractures that require stabilization of both the columns. The aim of this study is to assess the effectiveness of posterior column plating through the anterior intrapelvic approach (AIP) in the management of acetabular fractures. We retrospectively reviewed the data from R G Kar Medical College, Kolkata, India, from June 2018 to April 2023. Overall, there were 34 acetabulum fractures involving both columns managed by medial buttress plating of posterior column. The posterior column of the acetabular fracture was fixed through the AIP approach with buttress plate on medial surface of posterior column. Mean follow-up was 25 months (13 to 58). Accuracy of reduction and effectiveness of this technique were measured by assessing the Merle d'Aubigné score and Matta's radiological grading at one year and at latest follow-up. Immediate postoperative radiological Matta's reduction accuracy showed anatomical reduction (0 to 1 mm) in 23 cases (67.6%), satisfactory (2 to 3 mm) in nine (26.4%), and unsatisfactory (> 3 mm) in two (6%). Merle d'Aubigné score at the end of one year was calculated to be excellent in 18 cases (52.9%), good in 11 (32.3%), fair in three (8.8%), and poor in two (5.9%). Matta's radiological grading at the end of one year was calculated to be excellent in 16 cases (47%), good in nine (26.4%), six in fair (17.6%), and three in poor (8.8%). Merle d'Aubigné score at latest follow-up deteriorated by one point in some cases, but the grading remained the same; Matta's radiological grading at latest follow-up also remained unchanged. Stabilization of posterior column through AIP by medial surface plate along the sciatic notch gives good stability to posterior column, and at the same time can avoid morbidity of the additional lateral window.

Modal displacement analyses of Lamb waves in micro/nano-plates based on the consistent couple stress theory

In micro-scale structures, the influence of scale effects on the mechanical properties cannot be ignored, and the continuum mechanics theory cannot effectively describe guided wave propagation. This paper studies modal displacements in an isotropic micro/nano-scale plate — an essential factor for the mode selection of Lamb waves in non-destructive testing technology. To achieve this, the consistent couple stress theory, which additionally accounts for the impact of scale effects on wave propagation, has to be employed. A mathematical derivation method with singular value decomposition is proposed, and the excitation amplitude is computed by applying a normal stress source to evaluate the in-plane and out-of-plane displacements. The results indicate that the in-plane displacement vanishes on the plate surface for anti-symmetric modes when the phase velocity equals the velocity of shear waves. Moreover, the intersections of symmetric and anti-symmetric dispersion curves identify specific frequencies at which the out-of-plane displacement vanishes on the free surface. These findings highlight the difference in modal displacement characteristics between micro-scale and macro-scale structures. The results from this study may furnish theoretical guidance for ultrasonic non-destructive testing of microstructures.

Wetting and Spreading Behavior of Axisymmetric Compound Droplets on Curved Solid Walls Using Conservative Phase Field Lattice Boltzmann Method.

Compound droplets have received increasing attention due to their applications in many several areas, including medicine and materials. Previous works mostly focused on compound droplets on planar surfaces and, as such, the effects of curved walls have not been studied thoroughly. In this paper, the influence of the properties of curved solid wall (including the shape, curvature, and contact angle) on the wetting behavior of compound droplets is explored. The axisymmetric lattice Boltzmann method, based on the conservative phase field formulation for ternary fluids, was used to numerically study the wetting and spreading of a compound droplet of the Janus type on various curved solid walls at large density ratios, focusing on whether the separation of compound droplets occurs. Several types of wall geometries were considered, including a planar wall, a concave wall with constant curvature, and a convex wall with fixed or variable curvature (specifically, a prolate or oblate spheroid). The effects of surface wettability, interfacial angles, and the density ratio (of droplet to ambient fluid) on the wetting process were also explored. In general, it was found that, under otherwise identical conditions, droplet separation tends to happen more likely on more hydrophilic walls, under larger interfacial angles (measured inside the droplet), and at larger density ratios. On convex walls, a larger radius of curvature of the surface near the droplet was found to be helpful to split the Janus droplet. On concave walls, as the radius of curvature increases from a small value, the possibility to observe droplet separation first increases and then decreases. Several phase diagrams on whether droplet separation occurs during the spreading process were produced for different kinds of walls to illustrate the influences of various factors.

Heat transfer enhancement of water flow over a heating flat plate using 20 kHz ultrasonic waves irradiated from submerged horn-type transducer

The enhancement of heat transfer of water flow over a flat plate under 20 kHz ultrasound irradiated from a submerged horn-type transducer was investigated experimentally in a water tunnel. To examine the ultrasonic effects, the transducer emitted waves perpendicular to the mainstream direction, and the freestream velocity varied between 0.12 and 0.17 m/s. The transducer position was fixed at 0.45 m from the plate leading edge in a streamwise direction. This position was altered in a heightwise direction as dimensionless heightwise distances (Z) that were divided by the diameter of the horn-tip transducer (12 mm) at 1.5, 3.0, and 4.5 from the plate surface. A hot film sensor and thermochromic liquid crystals coated on the test surface were used to demonstrate the hydrodynamic and thermal characteristics, respectively. The maximum temperature reduction of 3.5 °C was observed in the case of Z = 1.5. By employing a horn-type transducer, the acoustic jet and cavitation phenomena played a key role in destabilizing the thermal and velocity boundary layers, which resulted in a decrease in surface temperature. The incident wave shape was triangular, with an enlarging lateral zone along the flow stream. When the waves were released at Z = 1.5, the local Nusselt number was increased up to 2.55 compared to without waves. Under ultrasonic effects, the near-wall flow velocity was detected to be decreasing upstream prior to the incident zone while increasing in the incident region. When waves existed, the highest turbulent intensity was up to 29 times more intense than it was in the absence of waves. Furthermore, a predictive formula for the Nusselt number with ultrasound was established depending on the local Reynolds number and the distance between the ultrasonic source and test surface.

Laser metal deposition of AlSi10Mg for aeroengine casing repair: Microhardness, wear and corrosion behavior

Laser metal deposition (LMD) based remanufacturing leverage of the flexibility of additive manufacturing and provides an attractive and cost-effective means for repairing or remanufacturing high value engineering components. In this work, AlSi10Mg alloy was cladding on the surface of cast aluminum alloy plate for aeroengine casing, AlSi10Mg repair layer with porosity of only 0.19% was obtained when the laser power P = 1800 W, powder feeding rate f = 1.6 g/min, scanning speed v = 8 mm/s. Microhardness, wear and corrosion resistance tests were used to evaluate the repair feasibility of the AlSi10Mg repair layer. The results indicated that the microhardness of the AlSi10Mg repair layer was more than 80% of aeroengine casing, the ultimate tensile strengthen and elongation of the repair layer are 215 ± 12 MPa and 5.79 ± 0.1%, respectively, while the tensile strength of the substrate is 225 MPa. The mechanical properties of the repair layer basically meet the repair requirements of the aeroengine casing. The coefficient of friction (COF) and wear rate ω of the repair layer were comparable to the level of aeroengine casing. Moreover, the corrosion behavior test results showed that the corrosion potential of as-build AlSi10Mg repair layer was −0.90 V, which was higher than that of substrate (−0.92 V), indicating that the AlSi10Mg repair layer has better corrosion resistance than substrate, and the Al9Si phase is the important factor that effecting the corrosion performance of AlSi10Mg repair layer. This work can provide reference for the potential application of the LMD technology in the field of high-quality repair of aeroengine casing.

Lamb wave-based corrosion source location on a plate of magnesium alloy WZ73 using the acoustic emission technique

Corrosion on a plate of magnesium alloy WZ73 in contact with 0.001 mol/L NaCl solution was analysed by long-range testing using the acoustic emission (AE) technique. At a distance d = 1.66 m to the source, the Lamb wave propagation of resulting AE events was examined and used for corrosion source location. As a first step, pencil lead break test was carried out and corresponding Lamb wave analysis served as reference to the varying corrosion signals of lower intensity. Additionally, the plate was excited by a piezo transducer for imitating a selected corrosion event. For analysis of the propagating wave field, the plate surface was measured by a scanning laser Doppler vibrometer (SLDV), allowing a high-resolution corrosion signal reconstruction and path tracking of direct and reflected Lamb wave packets. Based on the SLDV results, a deeper understanding of the complex wave field propagation during the sensor-based corrosion analysis was achieved.