Surface-enhanced Infrared Absorption Spectroscopy Research Articles

Identifying Adsorbed OH Species on Pt and Ru Electrodes with Surface-Enhanced Infrared Absorption Spectroscopy through CO Displacement.

OH adspecies are involved in numerous electrocatalytic reactions, such as CO, H2, methanol, and ethanol oxidation and oxygen reduction reactions, as a reaction intermediate and/or reactant. In this work, we have, for the first time, identified the OH stretching band of OH adspecies on Pt, Ru, and Pt/Ru electrodes with surface-enhanced infrared absorption spectroscopy (SEIRAS) in a flow cell through potential modulation and CO displacement. We found that while Ru had a relatively constant OH coverage at potentials between 0.1 and 0.8 V, Pt had a maximum OH coverage at 0.6 V in 0.1 M HClO4 and 0.7 V in 0.1 M KOH. CO oxidation kinetics on Ru were sluggish, although adsorbed OH appeared on Ru at very low potentials. Binary Pt/Ru electrodes promote CO oxidation through a synergistic effect in which Ru promotes OH adsorption and Pt catalyzes the reaction between the CO and OH adspecies. In addition, water coadsorbed with CO at Ru sites of Pt/Ru also plays an important role. These new spectroscopic results about OH adspecies could advance the understanding of the mechanism of fuel cell related electrocatalysis.

Achieving Efficient CO2 Electrolysis to CO by Local Coordination Manipulation of Nickel Single-Atom Catalysts.

Selective electroreduction of CO2 to C1 feed gas provides an attractive avenue to store intermittent renewable energy. However, most of the CO2-to-CO catalysts are designed from the perspective of structural reconstruction, and it is challenging to precisely design a meaningful confining microenvironment for active sites on the support. Herein, we report a local sulfur doping method to precisely tune the electronic structure of an isolated asymmetric nickel-nitrogen-sulfur motif (Ni1-NSC). Our Ni1-NSC catalyst presents >99% faradaic efficiency for CO2-to-CO under a high current density of -320 mA cm-2. In situ attenuated total reflection surface-enhanced infrared absorption spectroscopy and differential electrochemical mass spectrometry indicated that the asymmetric sites show a significantly weaker binding strength of *CO and a lower kinetic overpotential for CO2-to-CO. Further theoretical analysis revealed that the enhanced CO2 reduction reaction performance of Ni1-NSC was mainly due to the effectively decreased intermediate activation energy.

Ni-CeO2 Heterostructure Promotes Hydrogen Evolution Reaction via Tuning of the O-H Bond Length of Adsorbed Water at the Electrolyte/Electrode Interface.

Understanding the properties and structure of reactant water molecules at the electrolyte solution/electrode interface is relevant to know the mechanisms of hydrogen evolution reaction (HER). However, this approach has rarely been implemented due to the elusive local microenvironment in the vicinity of the catalyst. Taking the Ni-CeO2 heterostructure immobilized onto carbon paper (Ni-CeO2 /CP) as a model, the dynamic behavior of adsorbed intermediates during the reaction was measured by in situ surface-enhanced infrared absorption spectroscopy with attenuated total reflection configuration (ATR-SEIRAS). Theoretical calculations are used in combination to comprehend the potential causes of increased HER activity. The results show that the O-H bond of adsorbed water at the electrolyte solution/electrode interface becomes longer for promoting the dissociation of water and accelerating the kinetically slow Volmer step. In addition, forming the Ni-CeO2 heterostructure interface optimizes the hydrogen adsorption Gibbs free energy, thus increasing HER activity. Therefore, the Ni-CeO2 /CP electrode exhibits remarkably low HER overpotentials of 37 and 119 mV at 10 and 100 mA cm-2 , which are close to commercial Pt/C (16 and 102.6 mV, respectively).

Recent Progress in Infrared Absorption Spectroscopy for Gas Sensing With Discrete Optics, Hollow-Core Fibers and On-Chip Waveguides

Infrared absorption spectroscopy (IAS) is currently a powerful tool for gas sensing. Gas sensors based on IAS show advantages of high sensitivity, good selectivity and in-situ measurement. Typical infrared gas sensors include sensors based on discrete optics, hollow-core fiber sensors and on-chip sensors, suitable for different application environments. Discrete sensors and hollow-core fiber sensors have a relatively large volume and a heavy weight, but due to large light-gas interaction length (tens of meters or even kilometers), their sensitivity is obviously higher than on-chip gas sensors. Mature complementary metal oxide semiconductor (CMOS) fabrication process promotes the development of miniaturized on-chip sensors, which is portable in size, low in power consumption and light in weight. But the small on-chip sensor volume limits the interaction effect between light and gas analyte. Sensing techniques such as slow-light enhanced absorption spectroscopy and surface-enhanced infrared absorption spectroscopy are proposed to improve the on-chip sensing performance. In this paper, we review the gas sensing principle based on IAS briefly and the recent progress of the three kinds of sensors using different spectroscopy techniques. Finally, some conclusions and an outlook of IAS gas sensors are reached.

Tailoring the Interfacial Water Structure by Electrolyte Engineering for Selective Electrocatalytic Reduction of Carbon Dioxide

Engineering aqueous electrolytes with low amounts of additives to achieve a tunable CO2 reduction product is an underexplored territory in electrocatalysis. Here, we show the enhancement of the Faradaic efficiency (FE) of CO2 reduction to CO on unmodified polycrystalline gold from ∼67 to ∼94% by the addition of up to 15 mol % of N,N-dimethylformamide (DMF) to an aqueous electrolyte. The role of electrolyte structure modification near the electrode–electrolyte interface was studied using in situ surface-enhanced infrared absorption spectroscopy in attenuated total reflection mode (ATR-SEIRAS). In addition to the expected detection of the adsorbed CO (COad) intermediate present on the Au surface, in both the linearly bonded and bridge-bonded forms, we observed changes in the structure of interfacial water induced by the addition of DMF. The changes in the water stretching band and the DMF carbonyl band indicate an increase in the strongly hydrogen-bonded DMF–water pairs with increasingly negative potential near the interface in the presence of DMF. We hold this interfacial water structure modification by DMF responsible for increasing the CO2RR FE and decreasing the competing hydrogen evolution reaction (HER). Furthermore, the suppression of the HER is observed in other electrolytes and also when platinum was used as an electrode and hence can be a potential method for increasing the product selectivity of complex electrocatalytic reactions.

Spectroelectrochemical Investigation of the Local Alkaline Environment on the Surface-Nanostructured Au for the Conversion of CO2 to CO

The electrocatalytic conversion of carbon dioxide (CO2) into fuels could potentially achieve a sustainable carbon-based economy. The engineering of nanostructured metal electrodes can enhance their activity and selectivity by controlling their local chemical environment; however, direct observation is challenging. In this study, we investigate the molecular-level reaction mechanism of a nanoporous-structured Au electrode for the conversion of CO2 to carbon monoxide (CO) using surface-enhanced infrared absorption spectroscopy (SEIRAS). We designed a well-structured nanoporous Au layer (with a depth distribution of 56.3 nm) on a Si prism using a high-temperature non-aqueous anodization process and characterized the nanoporous Au electrode using atomic force microscopy (AFM) and X-ray absorption spectroscopy (XAS). The in situ SEIRAS results demonstrated that the nanoporous Au electrode has a dominant active site, promoting the linear CO intermediate and suppressing the bridging CO intermediate when compared with the non-structured Au electrode. We also revealed a high local pH at a reaction potential of −0.9 V and the slow diffusion kinetics of local CO32– at an open-circuit potential. These findings provide deeper insights into the electrochemical kinetics and corresponding mechanisms occurring in the electric double layers and highlight the potential for the design of efficient electrocatalysts for CO2 reduction.

Reaction-induced iodine adsorption on Cu surfaces facilitates electrocatalytic CO2 reduction.

The electrolyte effect has been key to the electrochemical CO2 reduction reaction (CO2RR) and has received extensive attention in recent years. Here we combined atomic force microscopy, quasi-in situ X-ray photoelectron spectroscopy, and in situ attenuated total reflection surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS) to study the effect of iodine anions on Cu-catalyzed CO2RR in the absence or presence of KI in the KHCO3 solution. Our results suggested that iodine adsorption caused coarsening of the Cu surface and altered its intrinsic activity for CO2RR. As the potential of the Cu catalyst became more negative, there was an increase in surface iodine anion concentration ([I-]), which could be connected to the reaction-enhanced adsorption of I- ions accompanying the increase in CO2RR activity. A linear relationship was observed between [I-] and current density. SEIRAS results further suggested that the presence of KI in the electrolyte strengthened the Cu-CO bond and facilitated the hydrogenation process, enhancing the production of CH4. Our results have thus provided insight into the role of halogen anions and aided in the design of an efficient CO2RR process.

Circumventing CO2 Reduction Scaling Relations Over the Heteronuclear Diatomic Catalytic Pair.

In the electrochemical CO2 reduction reaction (CO2RR), CO2 activation is always the first step, followed by the subsequent hydrogenation. The catalytic performance of CO2RR is intrinsically restricted by the competition between molecular CO2 activation and CO2 reduction product release. Here, we design a heteronuclear Fe1-Mo1 dual-metal catalytic pair on ordered porous carbon that features a high catalytic performance for driving electrochemical CO2 reduction to CO. Combining real-time near-ambient pressure X-ray photoelectron spectroscopy, operando 57Fe Mössbauer spectroscopy, and in situ attenuated total reflectance surface-enhanced infrared absorption spectroscopy measurements with density functional theory calculations, chemical adsorption of CO2 is observed on the Fe1-Mo1 catalytic pair through a bridge configuration, which prompts the bending of the CO2 molecule for CO2 activation and then facilitates the subsequent hydrogeneration reaction. More importantly, the dynamic adsorption configuration transition from the bridge configuration of CO2 on Fe1-Mo1 to the linear configuration of CO on the Fe1 center results in breaking the scaling relationship in CO2RR, simultaneously promoting the CO2 activation and the CO release.

Constructing Nanocaged Enzymes for Synergistic Catalysis of CO2 Reduction.

Promoting the activity of biological enzymes under in vitro environment is a promising technique for bioelectrocatalytic reactions, such as the conversion of carbon dioxide (CO2 ) into valuable chemicals, which is a promising strategy to address the environmental issue of CO2 in the atmosphere; however, this technique remains challenging. Herein, a nanocage structure for enzyme confinement is synthesized to enable the in situ encapsulation of formate dehydrogenase (FDH) in a porous metal-organic framework, which acts as a coenzyme and boosts the hybrid synergistic catalysis using enzymes. This study reveals that the synthesized FDH@ZIF-8 nanocage-structured hybrid (CSH) catalyst exhibits an improved catalytic ability of the enzymes and increases the hydrophobicity of the electrode and its affinity to CO2 . Thus, CSH can trap CO2 and control its microenvironments. The CSH catalyst boosts the conversion rate of CO2 to formic acid (HCOOH) to 28 times higher than that when using pure FDH. The in situ attenuated total reflectance surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS) spectra indicates that OCHO* is the key intermediate. Density functional theory (DFT) calculations show that CSH has extremely low overpotential and is particularly effective for producing formate. This protection architecture for enzymes considerably promotes their biological application under in vitro environments.

Promoting electrocatalytic CO2 reduction via anchoring quaternary piperidinium cations onto copper electrode

Cation identity in the electrolyte is known to have a critical influence on electrocatalytic CO2 reduction reaction (CO2RR). However, the impact of cation aggregation state at the electrode/electrolyte interface, particularly for organic cations, remains unclear for CO2RR. In this study, we investigated the effect of the organic cation aggregation state, by examining the CO2RR behaviors over a copper (Cu) electrode, before and after the surface modification of a polyelectrolyte (i.e., quaternary ammonia poly (N-methyl-piperidine-co-p-terphenyl) with grafted piperidinium cations), in an aqueous electrolyte with free-moving piperidinium (Pip+) cations. Immobilizing the Pip+ cations on Cu surface was found to effectively promote the CO2RR selectivity. The underlying cause was further explored by in-situ attenuated total reflectance surface-enhanced infrared absorption spectroscopy and electrochemical double-layer capacitance measurements, illustrating that the enhanced CO2RR performance was due to the change in electrode/electrolyte interface properties. These findings would contribute to further optimization of the electrode/electrolyte interface for efficient CO2RR.

Anion-Induced Interfacial Liquid Layers on LiCoO2 in Salt-in-Water Lithium-Ion Batteries.

The incompatibility of lithium intercalation electrodes with water has impeded the development of aqueous Li-ion batteries. The key challenge is protons which are generated by water dissociation and deform the electrode structures through intercalation. Distinct from previous approaches utilizing large amounts of electrolyte salts or artificial solid-protective films, we developed liquid-phase protective layers on LiCoO2 (LCO) using a moderate concentration of 0.5∼3 mol kg-1 lithium sulfate. Sulfate ion strengthened the hydrogen-bond network and easily formed ion pairs with Li+, showing strong kosmotropic and hard base characteristics. Our quantum mechanics/molecular mechanics (QM/MM) simulations revealed that sulfate ion paired with Li+ helped stabilize the LCO surface and reduced the density of free water in the interface region below the point of zero charge (PZC) potential. In addition, in situ electrochemical surface-enhanced infrared absorption spectroscopy (SEIRAS) proved the appearance of inner-sphere sulfate complexes above the PZC potential, serving as the protective layers of LCO. The role of anions in stabilizing LCO was correlated with kosmotropic strength (sulfate > nitrate > perchlorate > bistriflimide (TFSI-)) and explained better galvanostatic cyclability in LCO cells.

Formation of tethered bilayer lipid membranes on gold surface probed by in situ SEIRAS


 
 
 
 Tethered bilayer lipid membranes (tBLMs) are versatile platforms for the analysis of biochemical and biophysical processes at biological membranes. To control the stability and functional properties of these artificial constructions, molecular-level knowledge on the organization and structure is required. We used surface-enhanced infrared absorption spectroscopy (SEIRAS) to elucidate the in situ formation of tBLMs on a gold substrate. The alkyl chains of long-chain anchoring thiol in a mixed self-assembled monolayer after 60 min of incubation in an adsorption methanol-d4 solution was found to be in a disordered state. Spectroscopic data revealed the complete formation of a bilayer after 60 min of incubation of a mixed anchoring monolayer in a phosphate buffer solution containing vesicles formed from partially deuterated lipid DPPC-d62 and cholesterol-d7. The temporal evolution of absorption bands from the lipid, anchoring mixed monolayer thiol, and water with increasing the bilayer formation time in the phosphate buffer solution containing vesicles revealed a two-stage process. Firstly, the adsorption of lipid molecules with a simultaneous withdrawal of water takes place at the interface. Secondly, the transformation of alkyl chains of the anchoring monolayer due to the insertion and interaction of lipids with the monolayer proceeds.
 
 
 

A Spectroscopic Study on Nitrogen Electrooxidation to Nitrate.

As a potential substitute technique for conventional nitrate production, electrocatalytic nitrogen oxidation reaction (NOR) is gaining more and more attention. But, the pathway of this reaction is still unknown owing to the lack of understanding on key reaction intermediates. Herein, electrochemical in situ attenuated total reflection surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS) and isotope-labeled online differential electrochemical mass spectrometry (DEMS) are employed to study the NOR mechanism over a Rh catalyst. Based on the detected asymmetric NO2- bending, NO3- vibration, N=O stretching, and N-N stretching as well as isotope-labeled mass signals of N2O and NO, it can be deduced that the NOR undergoes an associative mechanism (distal approach) and the strong N≡N bond in N2 prefers to break concurrently with the hydroxyl addition in distal N.

Enhancing Selective Electrochemical CO2 Reduction by In Situ Constructing Tensile-Strained Cu Catalysts

Heteroatom-doped Cu-based catalysts have been found to show not only enhanced activity of electrochemical CO2 reduction reaction (CO2RR) but also the possibility to tune the selectivity of CO2RR. However, the complex and variable nature of Cu-based materials renders it difficult to elucidate the origin of the improved performance, which further hinders the rational design of catalysts. Here, we demonstrate that the activity and selectivity of CO2RR can be tuned by manipulating the lattice strain of Cu-based catalysts. The combined operando and ex situ spectroscopic characterizations reveal that the initial compressively strained Sn-doped CuO catalysts could be converted to tensile-strained Sn/Cu alloy catalysts under reaction conditions. In situ attenuated total reflectance surface-enhanced infrared absorption spectroscopy (ATR-SEITAS) and theoretical calculations further show that the tensile-strained Sn/Cu alloy catalysts favor CO formation due to the preponderant adsorption of *CO and much lower adsorption free energies of *COOH, thus effectively suppressing the dimerization process and the production of HCOOH and H2. This work provides a strategy to tune the CO2RR performance of Cu-based catalysts by manipulating the lattice strain.

Improved In Situ Characterization of Electrochemical Interfaces Using Metasurface‐Driven Surface‐Enhanced IR Absorption Spectroscopy

AbstractElectrocatalysis plays a crucial role in realizing the transition toward a zero‐carbon future, driving research directions from green hydrogen generation to carbon dioxide reduction. Surface‐enhanced infrared absorption spectroscopy (SEIRAS) is a suitable method for investigating electrocatalytic processes because it can monitor with chemical specificity the mechanisms of the reactions. However, it remains difficult to detect many relevant aspects of electrochemical reactions such as short‐lived intermediates. Herein, an integrated nanophotonic‐electrochemical SEIRAS platform is developed and experimentally realized for the in situ investigation of molecular signal traces emerging during electrochemical experiments. A platinum nano‐slot metasurface featuring strongly enhanced electromagnetic near fields is implemented and spectrally targets the weak vibrational mode of the adsorbed carbon monoxide at ≈2033 cm−1. The metasurface‐driven resonances can be tuned over a broad range in the mid‐infrared spectrum and provide high molecular sensitivity. Compared to conventional unstructured platinum films, this nanophotonic‐electrochemical platform delivers a 27‐fold improvement of the experimentally detected characteristic absorption signals, enabling the detection of new species with weak signals, fast conversions, or low surface concentrations. By providing a deeper understanding of catalytic reactions, the nanophotonic‐electrochemical platform is anticipated to open exciting perspectives for electrochemical SEIRAS, surface‐enhanced Raman spectroscopy, and other fields of chemistry such as photoelectrocatalysis.

Operando Spectroscopic Analysis of Axial Oxygen-Coordinated Single-Sn-Atom Sites for Electrochemical CO2 Reduction

Sn-based materials have been demonstrated as promising catalysts for the selective electrochemical CO2 reduction reaction (CO2RR). However, the detailed structures of catalytic intermediates and the key surface species remain to be identified. In this work, a series of single-Sn-atom catalysts with well-defined structures is developed as model systems to explore their electrochemical reactivity toward CO2RR. The selectivity and activity of CO2 reduction to formic acid on Sn-single-atom sites are shown to be correlated with Sn(IV)-N4 moieties axially coordinated with oxygen (O-Sn-N4), reaching an optimal HCOOH Faradaic efficiency of 89.4% with a partial current density (jHCOOH) of 74.8 mA·cm-2 at -1.0 V vs reversible hydrogen electrode (RHE). Employing a combination of operando X-ray absorption spectroscopy, attenuated total reflectance surface-enhanced infrared absorption spectroscopy, Raman spectroscopy, and 119Sn Mössbauer spectroscopy, surface-bound bidentate tin carbonate species are captured during CO2RR. Moreover, the electronic and coordination structures of the single-Sn-atom species under reaction conditions are determined. Density functional theory (DFT) calculations further support the preferred formation of Sn-O-CO2 species over the O-Sn-N4 sites, which effectively modulates the adsorption configuration of the reactive intermediates and lowers the energy barrier for the hydrogenation of *OCHO species, as compared to the preferred formation of *COOH species over the Sn-N4 sites, thereby greatly facilitating CO2-to-HCOOH conversion.

Kinetics of formic acid dehydration on Pt electrodes by time-resolved ATR-SEIRAS.

The potential dependence of the rate of dehydration of formic acid to adsorbed CO (COad) on Pt at pH 1 has been studied on a polycrystalline Pt surface by time-resolved surface-enhanced infrared absorption spectroscopy in the attenuated total reflection mode (ATR-SEIRAS) with simultaneous recording of current transients after a potential step. A range of formic acid concentrations has been used to obtain a deeper insight into the mechanism of the reaction. The experiments have allowed us to confirm that the potential dependence of the rate of dehydration has a bell shape, going through a maximum around the potential of zero total charge (pztc) of the most active site. The analysis of the integrated intensity and frequency of the bands corresponding to COL and COB/M shows a progressive population of the active sites on the surface. The observed potential dependence of the rate of formation of COad is consistent with a mechanism in which the reversible electroadsorption of HCOOad is followed by its rate-determining reduction to COad.

Direct Determination of Plasmon Enhancement Factor and Penetration Depths in Surface Enhanced IR Absorption Spectroscopy.

Surface Enhanced Infrared Absorption Spectroscopy (SEIRAS) is a powerful tool for studying a wide range of surface and electrochemical phenomena. For most electrochemical experiments the evanescent field of an IR beam partially penetrates through a thin metal electrode deposited on top of an attenuated total reflection (ATR) crystal to interact with molecules of interest. Despite its success, a major problem that complicates quantitative interpretation of the spectra from this method is the ambiguity of the enhancement factor due to plasmon effects in metals. We developed a systematic method for measuring this, which relies upon independent determination of surface coverage by Coulometry of a surface-bound redox-active species. Following that, we measure the SEIRAS spectrum of the surface bound species, and from the knowledge of surface coverage, retrieve the effective molar absorptivity, εSEIRAS. Comparing this to the independently determined bulk molar absorptivity leads us to the enhancement factor f = εSEIRAS/εbulk. We report enhancement factors in excess of 1000 for the C-H stretches of surface bound ferrocene molecules. We additionally developed a methodical approach to measure the penetration depth of the evanescent field from the metal electrode into a thin film. Such systematic measure of the enhancement factor and penetration depth will help SEIRAS advance from a qualitative to a more quantitative method.

Weak CO binding sites induced by Cu–Ag interfaces promote CO electroreduction to multi-carbon liquid products

Electrochemical reduction of carbon monoxide to high-value multi-carbon (C2+) products offers an appealing route to store sustainable energy and make use of the chief greenhouse gas leading to climate change, i.e., CO2. Among potential products, C2+ liquid products such as ethanol are of particular interest owing to their high energy density and industrial relevance. In this work, we demonstrate that Ag-modified oxide-derive Cu catalysts prepared via high-energy ball milling exhibit near 80% Faradaic efficiencies for C2+ liquid products at commercially relevant current densities (>100 mA cm−2) in the CO electroreduction in a microfluidic flow cell. Such performance is retained in an over 100-hour electrolysis in a 100 cm2 membrane electrode assembly (MEA) electrolyzer. A method based on surface-enhanced infrared absorption spectroscopy is developed to characterize the CO binding strength on the catalyst surface. The lower C and O affinities of the Cu–Ag interfacial sites in the prepared catalysts are proposed to be responsible for the enhanced selectivity for C2+ oxygenates, which is the experimental verification of recent computational predictions.

Revealing the Nanoarchitectonics of Amyloid β-Aggregation on Two-Dimensional Biomimetic Membranes by Surface-Enhanced Infrared Absorption Spectroscopy.

The in vivo folding of amyloid β (Aβ) is influenced by many factors among which biomembrane interfaces play an important role. Here, using surface-enhanced infrared absorption (SEIRA) spectroscopy and atomic force microscopy (AFM), the adsorption, structure, and morphology of Aβ42 aggregating on different two-dimensional interfaces were investigated. Results show that interfaces facilitate the aggregation of Aβ42 and are conducive to the formation of homogeneous aggregates, while the aggregates vary on different interfaces. On hydrophobic interfaces, strong hydrophobic interactions with the C-terminus of Aβ42 result in the formation of small oligomers with a small proportion of the β-sheet structure. On hydrophilic interfaces, hydrogen-bonding interactions and electrostatic interactions promote the formation of large aggregate particles with β-sheet structure. The hydration repulsion plays an important role in the interaction of Aβ42 with interfaces. These findings help to understand the nature of Aβ42 adsorption and aggregation on the biomembrane interface and the origin of heterogeneity and polymorphism of Aβ42 aggregates.