Sum Frequency Generation Vibrational Spectroscopy Research Articles

Probing photochemical dynamics using electronic vs vibrational sum-frequency spectroscopy: The case of the hydrated electron at the water/air interface.

Photo-dynamics can proceed differently at the water/air interface compared to in the respective bulk phases. Second-order non-linear spectroscopy is capable of selectively probing the dynamics of species in such an environment. However, certain conclusions drawn from vibrational and electronic sum-frequency generation spectroscopies do not agree as is the case for the formation and structure of hydrated electrons at the interface. This Perspective aims to highlight these apparent discrepancies, how they can be reconciled, suggests how the two techniques complement one another, and outline the value of performing both techniques on the same system.

Orientational Disorder of Alcohol Molecules at Their Solution Surfaces in Low Concentration Range: A Molecular Dynamics Simulation Study.

Molecular dynamics (MD) simulations of short-chain alcohols (methanol, ethanol, and 1-propanol) in solution were carried out to examine the orientational disordering (randomizing) of alcohol molecules at the surface under diluted conditions. Recent vibrational sum frequency generation (VSFG) spectroscopy, combined with photoelectron spectroscopy, has successfully measured the disordering structure at low concentrations. The present MD simulations accurately reproduce this observation for the first time. To ensure reliable results through MD simulations, several widely used force field models for water and alcohol, including polarizable models, were examined. This examination involved a comparison of structural and thermodynamic quantities, such as surface density times orientation and surface excess concentration, which were obtained through surface-specific measurements like VSFG spectroscopy and surface tension measurements. It is found that the width of the density profile for alcohol molecules at the surface, along the surface normal, increases as the concentration decreases in the diluted condition, which is consistent with the results obtained from the previous neutron and X-ray grazing incidence reflection experiments. A molecular mechanism explaining the disordering of alcohol molecules with decreasing concentration is also discussed.

Hierarchical ion interactions in the direct air capture of CO2 at air/aqueous interfaces.

The direct air capture (DAC) of CO2 using aqueous solvents is plagued by slow kinetics and interfacial barriers that limit effectiveness in combating climate change. Functionalizing air/aqueous surfaces with charged amphiphiles shows promise in accelerating DAC; however, insight into these interfaces and how they evolve in time remains poorly understood. Specifically, competitive ion interactions between DAC reagents and reaction products feedback onto the interfacial structure, thereby modulating interfacial chemical composition and overall function. In this work, we probe the role of glycine amino acid anions (Gly-), an effective CO2 capture reagent, that promotes the organization of cationic oligomers at air/aqueous interfaces. These surfaces are probed with vibrational sum frequency generation spectroscopy and molecular dynamics simulations. Our findings demonstrate that the competition for surface sites between Gly- and captured carbonaceous anions (HCO3-, CO32-, carbamates) drives changes in surface hydration, which in turn tunes oligomer ordering. This phenomenon is related to a hierarchical ordering of anions at the surface that are electrostatically attracted to the surface and their ability to compete for interfacial water. These results point to new ways to tune interfaces for DAC via stratification of ions based on relative surface propensities and specific ion effects.

Insights into the phase behavior at interfaces using vibrational sum frequency generation spectroscopy.

Phase separation is ubiquitous at the interface between two distinct phases. Physical transformation during phase separation often plays a crucial role in many important mechanisms, such as lipid phase separation, which is fundamental for transport through biological membranes. Phase separation can be complex, involving changes in the physical state and the reorganization of molecular structures, influencing the behavior and function of materials and biological systems. Surface-sensitive vibrational sum frequency generation (VSFG) spectroscopy provides a powerful tool for investigating these interfacial processes. As a non-linear optical technique, VSFG spectroscopy is sensitive to changes in molecular orientation and interactions at interfaces, making it an ideal method for studying phase separation processes. Here, we review the molecular interaction mechanisms underlying phase separation. We also explore the application of VSFG spectroscopy in studying phase separation processes at different interfaces. In particular, we focus on oil-water interfaces, which are relevant in environmental and industrial contexts; polymer and lipid surfaces, important for materials science and biological membranes; and intrinsically disordered protein systems, which play key roles in cellular function and disease.

Orientation Distribution of Crystalline β-Sheet Domains in Bombyx mori Silk Fiber Studied with Vibrational Sum Frequency Generation Spectroscopy.

Silk fibers have good biocompatibility and mechanical properties, which make them attractive in biomaterial applications as well as textile industries. It is believed that the superior mechanical property is associated with the crystalline β-sheet structure in the fiber; but a deeper understanding of the structure-property relationship is still needed for full exploitation of its physical properties. Especially, accurate information on hydrogen-bonding interactions within β-sheet domains at the nanoscale and their spatial distributions at the mesoscale are critically needed. In this study, we demonstrate the selective detection of crystalline β-sheet domains in Bombyx mori silk fiber using sum frequency generation (SFG) spectroscopy and its use to determine the angular distribution of the β-sheet crystallites with respect to the fiber axis. Numerical simulations of the SFG signal of the amide-I band were carried out using tensors based on the B2 symmetry of the D2 point group and compared with experimental data. This comparison found that the crystalline β-sheet domains are aligned along the fiber axis with a standard deviation of ∼27° and parallel to the fiber surface with a standard deviation of ∼5°. It was also found that the amide bands in the SFG spectra cannot be fully explained with the assumption that the crystalline β-sheet vibrations can be described with the D2 point group. Being able to monitor the amide group vibrations sensitive to both interchain hydrogen bonding and crystallite orientations, SFG analysis has a potential to unveil the structure-mechanical property relationship that may not be readily assessable with other characterization techniques.

Solution and Surface Solvation of Nitrate Anions with Iron(III) and Aluminum(III) in Aqueous Environments: A Raman and Vibrational Sum Frequency Generation Study.

Hydrated trivalent metal nitrate salts, Fe(NO3)3·9H2O and Al(NO3)3·9H2O, in both solid and aqueous phases are investigated. Raman and surface-selective vibrational sum frequency generation (SFG) spectroscopy, are used to shed light on ion-ion interactions and hydration in several spectral regions spanning low frequency (440-550 cm-1) to higher frequency modes of nitrate and water (720, 1050, 1250-1450, and 2800-3750 cm-1). These frequencies span the metal-water mode, nitrate in-plane deformation, nitrate symmetric and asymmetric modes, and the OH stretch of condensed phase water molecules. Comparison to NaNO3, and in some cases KNO3, is also shown, providing insight. Splitting and frequency shifts are observed and discussed for both the solid state and solution phase. The Lewis acidity of Fe3+ and Al3+ ions plays a significant role in the observed spectra, in particular for the nitrate asymmetric band splitting and frequency shift. The spectral response from water solvation for iron and aluminum nitrates is nonlinear as compared to linear for sodium nitrate, suggesting significantly different solvation environments that are limited by water hydration capacity at higher concentrations. Moreover, a non-hydrogen bonded OH, dangling OH, from hydrating water molecules is observed spectroscopically for Al and Fe nitrate solutions. Furthermore, aluminum nitrate perturbs the surface water structure more than iron nitrate despite aluminum being a weaker Lewis acid. The surface water structure is thus found to be unique for the Al(NO3)3 solutions as compared to both Fe(NO3)3 and NaNO3, such that surface solvation is more pronounced. This observation exemplifies the nature of the Fe(III) and Al(III) ions and their substantial influence on the surface water structure.

Mixed equilibrium/nonequilibrium effects govern surface mobility in polymer glasses

Using angle-resolved X-ray photoelectron spectroscopy, sum-frequency generation vibrational spectroscopy, contact angle measurements, and molecular dynamics simulations, we verify that the glass transition temperature (Tg) of polymer glass is lower near the free surface. However, the experimental Tg-gradients showed a linear variation with depth (z) from the free surface, while the simulated equilibrium Tg-gradients exhibited a double exponential z-dependence. In typical simulations, Tg is determined based on the relaxation time of the system reaching a prescribed threshold value at equilibrium. Conversely, the experiments determined Tg by observing the unfreezing of molecular mobility during heating from a kinetically arrested, nonequilibrium glassy state. To investigate the impact of nonequilibrium effects on the Tg-gradient, we reduced the thermal annealing time in simulations, allowing the system to fall out of equilibrium. We observe a decrease in the relaxation time and the emergence of a modified z-dependence consistent with a linear Tg-gradient near the free surface. We further validate the impact of nonequilibrium effects by studying the dependence of the Tg on the heating/cooling rate for polymer films of varying thickness (h). Our experimental results reveal significant variations in the Tg-heating/cooling rate dependence with h below the bulk Tg, which are also observed in simulation when the simulated system is not equilibrated. We explain our findings by the reduction in mass density within the inner region of the system under nonequilibrium conditions, as observed in simulation, and recent research indicating a decrease in the local Tg of a polymer when placed next to a softer material.

Investigation of the double layer structure of 1-butyl-3-methylimidazolium thiocyanate at the air-water interface using sum-frequency generation vibrational spectroscopy.

The interfacial structure and adsorption behavior of 1-butyl-3-methylimidazolium thiocyanate ionic liquids (ILs) aqueous solutions were investigated using sum-frequency generation vibrational spectroscopy (SFG-VS) and surface tension measurements. Polarization-dependent measurements revealed a dramatic increase in the SFG signal for both CH and CN stretching modes with increasing ILs concentration, reaching a maximum at a mole fraction of 0.01. This concentration dependence was accompanied by a dramatic drop in surface tension. Upon further increasing the concentration, surface tension varied slightly and reached a constant value, while the SFG signal decreased significantly. Quantitative polarization analysis showed that as the bulk concentration increased, the apparent molecular orientation of the SCN- transition dipole at the interface changed from 51° to 46°, and the tilt angle of CH3 group of the butyl chain attached to the imidazole cationic ring changed from 18° to 32°. The decrease in the SFG signal can be explained by the formation of a double layer adsorption structure at the air/water interface. It was also demonstrated that the anions were adsorbed at the interface simultaneously with the cationic group, rather than by successive adsorption as proposed in a previous study. Using the Shereshefsky model, the thermodynamic Gibbs free energy of adsorption deduced from surface tension data was compared with SFG results.

Dynamic protein hydration water mediates the aggregation kinetics of amyloid β peptides at interfaces

Protein hydration water is essential for protein misfolding and amyloid formation, but how it directs the course of amyloid formation has yet to be elucidated. Here, we experimentally demonstrated that femtosecond sum frequency generation vibrational spectroscopy (SFG–VS) and the femtosecond IR pump–SFG probe technique can serve as powerful tools for addressing this issue. Using amyloid β(1–42) peptide as a model, we determined the transient misfolding intermediates by probing the amide band spectral features and the local hydration water changes by measuring the ultrafast vibrational dynamics of the amide I band. For the first time, we established a correlation between the dynamic change in protein hydration water and aggregation propensity. The aggregation propensity depends on the dynamic change in the hydration water, rather than the static hydration water content of the initial protein state. Water expulsion enhances the aggregation propensity and promotes amyloid formation, while protein hydration attenuates the aggregation propensity and inhibits amyloid formation. The suppression of water expulsion and protein hydration can prevent protein aggregation and stabilize proteins. These findings contribute to a better understanding of the underlying effect of hydration water on amyloid formation and protein structural stability and provide a strategy for maintaining long–term stabilization of biomolecules.

Correlations between adhesion and molecular interactions at buried interfaces of model polymer systems and in commercial multilayer barrier films.

Sum frequency generation vibrational spectroscopy (SFG) was applied to characterize the interfacial adhesion chemistry at several buried polymer interfaces in both model systems and blown multilayer films. Anhydride/acid modified polyolefins are used as tie layers to bond dissimilar polymers in multilayer barrier structures. In these films, the interfacial reactions between the barrier polymers, such as ethylene vinyl alcohol (EVOH) or nylon, and the grafted anhydrides/acids provide covalent linkages that enhance adhesion. However, the bonding strengths vary for different polymer-tie layer combinations. Here, using SFG, we aim to provide a systematic study on four common polymer-tie interfaces, including EVOH/polypropylene-tie, EVOH/polyethylene-tie, nylon/polypropylene-tie, and nylon/polyethylene-tie, to understand how the adhesion chemistry varies and its impact on the measured adhesion. Our SFG studies suggest that adhesion enhancement is driven by a combination of reaction kinetics and the interfacial enrichment of the anhydride/acid, resulting in stronger adhesion in the case of nylon. This observation matches well with the higher adhesion observed in the nylon/tie systems in both lap shear and peel test measurements. In addition, in the polypropylene-tie systems, grafted oligomers due to chain scission may migrate to the interface, affecting the adhesion. These by-products can react or interfere with the barrier-tie chemistry, resulting in reduced adhesion strength in the polypropylene-tie system.

Change of composition and surface plasmon resonance of Pd/Au core/shell nanoparticles triggered by CO adsorption.

Controlling composition and plasmonic response of bimetallic nanoparticles (NPs) is of great relevance to tune their catalytic activity. Herein, we demonstrate reversible composition and plasmonic response transitions from a core/shell to a bimetallic alloyed palladium/gold NP triggered by CO adsorption and sample temperature. The use of self-organized growth on alumina template film allows scrutinizing the impact of core size and shell thickness onto NP geometry and plasmonic response. Topography, molecular adsorption, and plasmonic response are addressed by scanning tunneling microscopy, vibrational sum frequency generation (SFG) spectroscopy, and surface differential reflectance spectroscopy, respectively. Modeling CO dipolar interaction and optical reflectivity corroborate the experimental findings. We demonstrate that probing CO adsorption sites by SFG is a remarkably sensitive and relevant method to investigate shell composition and follow in real-time Pd atom migration between the core and the shell. Pd-Au alloying is limited to the first two monolayers of the shell and no plasmonic response is found, while for a thicker shell, a plasmonic response is observed, concomitant with a lower Pd concentration in the shell. Above 10-4mbar, at room temperature, CO adsorption triggers the shell restructuration, forming a Pd-Au alloy that weakens the plasmonic response via Pd migration from the core to the shell. NP annealing at 550K, after pumping CO, leads to the desorption of remaining CO and gives enough mobility for Pd to migrate back inside the core and recover a pure gold shell with its original plasmonic response. This work demonstrates that surface stoichiometry and plasmonic response can be tuned by using CO adsorption and NP annealing.

Probing the Influence of Hydrophobicity of Modified Gold Nanoparticles in Modulating the Lipid Surface Behavior Using Vibrational Sum Frequency Generation Spectroscopy.

A deep understanding of how the surface modifications of nanoparticles impact their interactions with cell membranes is vital for advancing safe and effective biomedical applications. Among the pivotal factors governing these interactions, the hydrophobicity of nanoparticles plays a crucial role, predominantly driven by the hydrophobic interactions with the cell membrane. Herein, we study the influence of the hydrophobic alkyl chain length of thiol-capped gold nanoparticles (GNPs) on lipid surfaces with the help of vibrational sum frequency generation spectroscopy. We have utilized the zwitterionic 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) lipid monolayer as a representative model of cell membranes on the water surface. Our findings revealed that GNPs capped with the thiol ligand having a shorter alkyl chain such as heptanethiol (HT, C7) show minimal changes in the C-H stretching vibrations while interacting with the lipid monolayer. These observations could be attributed to the perturbation of the lipid chain due to hydrophobic-hydrophobic interactions between the alkyl chain of thiol-capped GNPs and the hydrophobic group of the lipid membrane or simply by the adsorption of GNPs at the interface without disrupting the monolayer structure. However, with increasing the chain length of thiol-capped GNPs from decanethiol (DDT, C10) to octadecanethiol (ODT, C18), the extent of spectral change in the C-H stretching vibration is increased. The controlled experiment performed with the deuterated lipids conforms that the changes observed in the C-H stretching vibration after adding HT (C7) GNPs are only because of their presence in the surface without altering the monolayer structure. However, in the case of DT (C10) and DDT (C12) GNPs, the strong hydrophobic interactions between the monolayer and the alkyl chain of the thiol-capped GNPs result in the increased orientational order of the monolayer. Moreover, in the case of ODT (C18) GNPs, the very long alkyl chain induces pronounced perturbations in the monolayer structure with net disordering of the monolayer. These observations are further supported by the spectral changes observed in the O-H vibration of the interfacial water molecules. Our findings reveal the crucial role of the hydrophobic nature of GNPs in influencing the interface. Understanding these effects is crucial for drug delivery applications and improving the stability and effectiveness of lipid-based systems.

Molecular Structures of Poly(methyl methacrylate) at Different Buried Interfaces Revealed by Sum Frequency Generation Vibrational Spectroscopy.

Silica or calcium fluoride (CaF2) substrate-supported poly(methyl methacrylate) (PMMA) thin films as insulating layers are commonly used in photoelectric/photovoltaic devices to improve the efficiency or stability of these devices. However, a comparative investigation of molecular structures at buried PMMA/silica and PMMA/CaF2 interfaces under thermal stimuli remains unexplored. In this study, we qualitatively and quantitatively revealed different molecular orderings and orientations of PMMA at two interfaces before and after annealing using sum frequency generation (SFG) vibrational spectroscopy. SFG vibrations were carefully assigned by using various deuterated PMMAs. SFG results indicated that, at the buried PMMA/silica interface, the side OCH3 groups were prone to lie down before annealing and tended to stand up after annealing. In contrast, the case was the opposite at the buried PMMA/CaF2 interface. The relative hydrophobicity/hydrophilicity of the two substrates and the developed hydrogen bonds upon annealing at the buried PMMA/silica interface, which is absent at the CaF2 surface, are believed to be the driving forces for different interfacial molecular structures. This study benefits the molecular-level understanding of the interfacial local structural relaxation of polymers at buried interfaces and the rational design of photoelectric/photovoltaic devices from the molecular level.

De Novo Design and Characterization of Amphiphilic Peptides with Basic Side Chains for Tailored Interfacial Chemistries.

Lysine-leucine (LK) peptides have been used as model systems and platforms for 2D material design for decades. LK peptides are amphiphilic sequences designed to bind and fold at hydrophobic surfaces through hydrophobic leucine side chains and hydrophilic lysine side chains extending into the aqueous subphase. The hydrophobic periodicity of the sequence dictates the secondary structure at the interface. This robust design makes them ideal candidates for controlling interfacial chemistry. This study presents the de novo design and characterization of two novel peptides: LRα14 and LHα14, which substitute lysine with arginine and histidine, respectively, in the helical LKα14 sequence. This modification is intended to expand the LK peptide platform to a new basic interfacial chemistry. We explore the stability of the new LRα14 and LHα14 designs with respect to changes in pH and salt concentration in bulk solution and at the interface using circular dichroism (UV-CD) and vibrational sum-frequency generation spectroscopy, respectively. Notably, the structural stability of the peptides remains unaffected across a wide range of pH and ionic strength values. At the same time, the variation of side-chain chemistry leads to a wide spectrum of interfacial water structures. By extension of the LK platform to include arginine and histidine, this study broadens the toolbox for designing tailored interfacial chemistries with applications in material and biomedical sciences.

NST3 induces ectopic transdifferentiation, forming secondary walls with diverse patterns and composition in Arabidopsis thaliana.

The master transcription factor NAC SECONDARY WALL THICKENING PROMOTING FACTOR3 (NST3), also known as SND1, plays a pivotal role in regulating secondary cell wall (SCW) development in interfascicular and xylary fibers in Arabidopsis thaliana. Despite progress in understanding SCW assembly in xylem vessel-like cells, the mechanisms behind its assembly across different cell types remain unclear. Overexpressing NST3 or its homolog NST1 leads to reduced fertility, posing challenges for studying their impact on secondary wall formation. This study aimed at developing a tightly regulated dexamethasone (DEX)-inducible expression system for NST3 and NST1 to elucidate the structure and assembly of diverse SCWs. Using the DEX-inducible system, we characterized ectopically formed SCWs for their diverse patterns, mesoscale organization, cellulose microfibril orientation, and molecular composition using spinning disk confocal microscopy, field emission scanning electron microscopy (FESEM), vibrational sum-frequency generation (SFG) spectroscopy and, histochemical staining and time-of-flight secondary ion mass spectrometry (ToF-SIMS), respectively. Upon DEX treatment, NST3 and NST1 transgenic hypocotyls underwent time-dependent transdifferentiation, progressing from protoxylem-like to metaxylem-like cells. NST3-induced plants exhibited normal growth but had rough secondary wall surfaces with delaminating S2 and S3 layers. Mesoscale examination of induced SCWs in epidermal cells revealed that macrofibril thickness and orientation were comparable to xylem vessels, while wall thickness resembled that of interfascicular fibers. Additionally, induced epidermal cells formed SCWs with altered cellulose and lignin contents. These findings suggest NST3 and/or NST1 induce SCWs with shared characteristics of both xylem and fiber-like cells forming loosely arranged cell wall layers and cellulose organized at multiple angles relative to the cell growth axis and with varied cellulose and lignin abundance. This inducible system opens avenues to explore ectopic SCWs for bioenergy and bioproducts, offering valuable insights into SCW patterning across diverse cell types and developmental stages.

Close Packing in Trans Conformers Promotes the Formation of Supramolecular Structures with C1 Symmetry.

Assemblies with C1 symmetry exhibit important applications in many fields such as enantioselective catalysis. However, their formation is challenging due to their large entropic disadvantage, and molecular information on their formation dynamics is limited because of the lack of effective characterization techniques. Here, using achiral amphiphilic molecules such as N-oleoyl ethanolamide (OEA) and its analogues as modeling assembly units, we demonstrated that the sss polarization signals, generated by femtosecond sum frequency generation vibrational spectroscopy (SFG-VS), provide a powerful tool to monitor the formation dynamics of the C1 symmetric supramolecular structures at the interfaces. The trans conformation of the assembly units can provide strong π-π interactions and thus produce enough enthalpy to drive the formation of C1 symmetric supramolecular structures. However, the cis conformation impedes the assembly of C1 symmetric structures and cannot generate sss and chiral polarization SFG signals. These findings may aid in rationally constructing ordered and functional superstructures and understanding the mechanism of chirality formation.

Investigating Lipase/Stain Interactions: Determining Interfacial Protein Conformation with Surface Spectroscopy.

Conventional bulk protein structure determination methods are not suitable for understanding the distinct and diverse interactions of proteins with interfaces. Notably, interfacial activation is a feature common to many lipases involving movement of a helical "lid" region upon contact with a hydrophobic surface to expose the catalytic site. Here we use the surface specificity of vibrational sum frequency generation spectroscopy (VSFG) spectroscopy to directly probe the conformation of Thermomyces lanuginosus lipase (TLL) at hydrophobic interfaces. The TLL-catalyzed reaction at the air/water interface is monitored by VSFG spectroscopy, showing loss of ester carbonyl modes and appearance of carboxylate stretching modes of the fatty acid products. Furthermore, comparison of experimental and calculated VSFG spectra of the amide I band of TLL allows us to discern the subtle structural changes involved with lid-opening at a hydrophobic surface. Finally, we report a likely orientation of this lid-open state, which interacts with the surface through a loop region away from the lid and active site. This experimental framework for probing protein structure and function at interfaces addresses a significant problem in protein science that is not only impeding the design of better enzymes for biotechnology applications but also drug discovery targeting membrane associated proteins.

Probing the Saltwater Immersion Effect on Buried Interfacial Structures between a Sealant and Adhesion Promoter at the Molecular Level.

In this research, we used sum frequency generation vibrational spectroscopy to investigate the buried interface of a thiol-epoxy model aerospace sealant in contact with a silane-based adhesion promoter (6111) following exposures to 3% saltwater at elevated temperatures and elevated temperatures alone. The results suggest that the saltwater caused a change at the interface between the adhesion promoter and sealant, while an elevated temperature of 60 °C itself did not affect the interfacial structure noticeably. Model hydrolyzed and nonhydrolyzed silanes were also used in the study to compare with the adhesion promoter 6111 to understand the interfacial behavior of main silane components in 6111 as well as their potential role in adhesion. The amino silane in 6111 likely segregates more at the sealant/adhesion promoter interface and interacts with the sealant compared to the vinyl silane. The results imply that the saltwater immersion process led to the disordering of the adhesion promoter/sealant interface (caused by interfacial structural randomization), which could potentially have implications for adhesion.

Cyanide Linkage Isomerization Induced by Cobalt Oxidation-State Changes at a Co-Fe Prussian-Blue Analogue/ZnO Interface.

Understanding the interfacial composition in heterostructures is crucial for tailoring heterogenous electrochemical and photoelectrochemical processes. This work aims to elucidate the structure of a series of Co-Fe Prussian blue analogue modified ZnO (PBA/ZnO) electrodes with interface-sensitive vibrational sum frequency generation (VSFG) spectroscopy. Our measurements revealed, for the first time, a cyanide linkage isomerism at the PBA/ZnO interface, when the composite is fabricated at elevated temperatures. In situ VSFG spectro-electrochemistry measurements correlate the CoII➝CoIII oxidation with the flip of the bridging CN ligand from Co-NC-Fe coordination mode to a Co-CN-Fe one. Photoluminescence measurements and X-ray photoelectron spectroscopy reveal that this unprecedented linkage isomerism originates from surface defects, which act as oxidation sites for the PBA. The presence of such surface defects is correlated with the fabrication temperature for PBA/ZnO. Thus, this contribution identifies the interplay between the surface states of the ZnO substrates and the chemical composition of PBA at the ZnO surface, suggesting an easily accessible approach to control the chemical composition of the interface.

Phase of the second-order susceptibility in vibrational sum frequency generation spectroscopy: Origins, utility, and measurement techniques.

Vibrational sum frequency generation can provide valuable structural information at surfaces and buried interfaces. Relating the measured spectra to the complex-valued second-order susceptibility χ(2) is at the heart of the technique and a requisite step in nearly all subsequent analyses. The magnitude and phase of χ(2) as a function of frequency reveal important information about molecules and materials in regions where centrosymmetry is broken. In this tutorial-style perspective, the origins of the χ(2) phase are first described, followed by the utility of phase determination. Finally, some practical methods of phase extraction are discussed.