Subcarrier Frequency Research Articles

Broadband multi‐carrier linear frequency modulation signal reception with subcarrier frequency offset deramp processing

AbstractIn this paper, a broadband multi‐carrier linear frequency modulation (LFM) signal reception method with subcarrier frequency offset deramp processing is proposed and investigated. The proposed frequency offset deramp processing is implemented by mixing the multi‐carrier LFM radar echo with a multi‐carrier LFM reference that has a different subcarrier frequency interval. With this design, the sampling rate of the radar receiver is remarkably reduced and crosstalk‐free separation of different subcarrier signals is easily conducted in the frequency domain. To fuse the multiple subcarriers and fill the frequency gaps, a sparse reconstruction method is employed to obtain the broadband response, which is essential for achieving high range resolution detection. The effectiveness of the proposed method is validated through an experiment in which the reception of an 8‐carrier LFM signal is conducted and a total bandwidth of 6 GHz after multi‐carrier fusion is demonstrated. An inverse synthetic aperture radar imaging experiment is also conducted with the results verifying the good potential of the proposed method in practical applications.

W-band photonic-aided reconfigurable multichannel vector mm-wave transmission enabled by the digital subcarrier multiplexing technique.

As multimedia service demands rise, radio-over-fiber (RoF) systems necessitate a flexible wireless resource allocation in multi-user scenarios. Optical wavelength division multiplexing (WDM) can meet multi-user application scenarios but has the problems of high hardware cost and complexity. In this Letter, we propose a photonic-aided reconfigurable multichannel vector millimeter-wave (mm-wave) transmission scheme in the RoF system enabled by the digital subcarrier multiplexing (DSCM) technique. The scheme can flexibly adjust the number and frequency spacing of subcarriers as well as the bandwidth and modulation format allocated to each subcarrier, and it can be applied to multi-user scenarios without increasing the cost and complexity of hardware implementation. The off-line experiments verify the system transmission performance with different numbers, bandwidth, and frequency spacing of subcarriers, fully verifying the feasibility of the scheme. Furthermore, the Letter delves into the effects of the subcarrier number, bandwidth, and frequency spacing on overall system performance, highlighting the potential of this scheme for flexible and cost-effective wireless resource allocation in RoF systems.

GrainSense: A Wireless Grain Moisture Sensing System Based on Wi-Fi Signals

Grain moisture sensing plays a critical role in ensuring grain quality and reducing grain losses. However, existing commercial off-the-shelf (COTS) grain moisture sensing systems are either expensive, inconvenient or inaccurate, which greatly limit their widespread deployment in real-world scenarios. To fill this gap, we develop a system called GrainSense which leverages COTS Wi-Fi devices to detect the grain moisture without the need for dedicated sensors. Specifically, we propose a wireless grain moisture detection model based on the refraction phenomenon of Wi-Fi signals and the Multiple-Input-Multiple-Output (MIMO) technology. On one hand, we correlate the grain moisture with the phase difference between two refracted Wi-Fi signals that propagate along different paths, based on which grain moisture can be deduced accordingly. On the other hand, to reduce the multi-path interference in indoor environments (e.g., the granary), we adopt Wi-Fi beamforming to enhance the refracted signal. In particular, a new signal feature (i.e., the Wi-Fi CSI beamforming ratio) is designed to eliminate the effect of sub-carrier frequency bias and cumulative phase bias. To validate the effectiveness of the developed system, we conduct extensive experiments with different types of grains in both the laboratory and the granary. Results show that the system can accurately estimate the grain moisture with an mean absolute error smaller than 5%, which meets the requirements for commercial usage. To the best of our knowledge, this is the first model-based work that achieves accurate grain moisture detection based on wireless sensing.

Non-Contact Heart Rate Monitoring Method Based on Wi-Fi CSI Signal.

This paper introduces an innovative non-contact heart rate monitoring method based on Wi-Fi Channel State Information (CSI). This approach integrates both amplitude and phase information of the CSI signal through rotational projection, aiming to optimize the accuracy of heart rate estimation in home environments. We develop a frequency domain subcarrier selection algorithm based on Heartbeat to subcomponent ratio (HSR) and design a complete set of signal filtering and subcarrier selection processes to further enhance the accuracy of heart rate estimation. Heart rate estimation is conducted by combining the peak frequencies of multiple subcarriers. Extensive experimental validations demonstrate that our method exhibits exceptional performance under various environmental conditions. The experimental results show that our subcarrier selection method for heart rate estimation achieves an average accuracy of 96.8%, with a median error of only 0.8 bpm, representing an approximately 20% performance improvement over existing technologies.

Determination of the splitting function by signal spectrum

In modern telecommunication, spread spectrum techniques often used. Special case of spread spectrum – spectrum splitting. This technique is characterized by signals whose energy is concentrated in two or more spaced portions of the spectrum. If there is a modulating subcarrier in modulation function, and this subcarrier is shorter then duration of transmitted information symbols by a multiplicity factor, then this function provide spectrum splitting. The frequency of this subcarrier called subcarrier frequency, and function of this subcarrier called subcarrier frequency function or splitting function. The main problem of this article is the ability to determine by which split function the original spectrum of the unknown signal has obtained, because during the analysis it is necessary to understand general patterns of the signal formation. The article discusses various signals with spectrum splitting. There is an overview of the methods of spectrum splitting obtained for different types of modulation (phase, amplitude, frequency) and some splitting functions (harmonic, meander and functions of periodic triangular pulses). The spectrums of the signals obtained by different splitting functions are studied and conclusions has drawn on how to determine the splitting function and the type of modulation for the spectrum splitting of an unknown signal.

Application of complex-valued convolutional neural networks for equalization and detection of SEFDM systems

Background. The disadvantage of spectrally efficient signals with frequency multiplexing is the occurrence of intersymbol interference, which is further aggravated when these signals propagate in frequency selective channels.
 Aim. The possibility and effectiveness of using neural network approaches for channel equalization and signal detection in communication systems using SEFDM signals has been assessed.
 Methods. A receiver structure for SEFDM systems based on a deep complex-valued convolutional neural network is proposed, which allows recovering bits from the temporal representation of the signal without using the fractional Fourier transform and inverting the cross-correlation matrix between frequency subcarriers. A two-stage network training scheme has been developed. Based on simulation modeling, a comparative analysis of the noise immunity of SEFDM systems was carried out both in a channel with white Gaussian noise and in a channel with Rayleigh fading, using classical and neural network receivers.
 Results. It is shown that there is no loss of noise immunity in channels with additive white Gaussian noise and an increase in noise immunity of the system up to 2 dB in the channel specified by the extended automotive model (3GPP-EVA).
 Conclusion. The effectiveness of using deep neural complex-valued convolutional networks as receivers for spectrally efficient communication systems, as well as their advantage over classical ones, is shown.
 Keywords – SEFDM; deep complex-valued convolutional neural network; turbocoding.

PEAK-TO-AVERAGE POWER RATIO OF SPECTRALLY EFFICIENT FDM SIGNALS

The change of the number of subcarriers in SEFDM signal from 5 to 1024 leads to the growth of the PAPR (peak-to-average power ratio) from 4.5 to 9 dB. PAPR of SEFDM signals stays about constant (instability is no more than 5%) while normalized subcarriers frequency spacing increase from 1/2 to 1. It indicates no additional energy loss during the transition from OFDM signals to SEFDM signals, caused by an increase in the PAPR. It is proposed to use a part of the resulting gain in the frequency band to reduce PAPR. The method, based on modification of Tone Insertion method, was developed. Developed method consists in adding additional subcarriers with randomly generated manipulation symbols to the SEFDM signal. SEFDM symbol with minimal PAPR is chosen to be send. According to this method the PAPR can be reduced in average of 1.4 dB. The degree of reduction of the PAPR depends on the size of the channel alphabet of additional subcarriers (changing of the average win is 0.6 dB for BPSK to 1.4 dB for QAM-64) and the number of combinations of symbols of additional subcarriers (1.6 dB for 1000 combinations for QAM-64). According to estimation of the FPGA resources for implementation of PAPR reduction algorithm it is required relatively small resource costs compared to the formation of SEFDM signal without reduction.

Stepped-Frequency Binary Offset Carrier Modulation for Global Navigation Satellite Systems

In this paper, we propose Stepped-Frequency Binary Offset Carrier (SFBOC) modulation for Global Navigation Satellite Systems (GNSS) that use spread spectrum signals. SFBOC modulation generates a Binary Offset Carrier (BOC) signal of which the subcarrier frequency varies stepwise within each period of the pseudorandom-noise (PRN) code. The generated SFBOC signal can have a sharp autocorrelation function (ACF) output and an almost flat spectrum over a wide frequency band. These characteristics result in correlation properties, multipath mitigation, and anti-interference that are superior to those of conventional GNSS modulations. To testify, we compare the performance of SFBOC in various aspects to conventional GNSS modulations and other time-varying subcarrier frequency (TVSF) modulations. From numerical simulations, we show that the proposed SFBOC has higher ranging accuracy, lower tracking ambiguity, and more robustness to noise, interference, and multipath than the conventional GNSS modulations. In addition, we demonstrate that the proposed SFBOC moulation has two advantages while other modulations with TVSF cannot have both; that SFBOC is robust to code-Doppler and that, when filterbank is employed, SFBOC improves the signal-to-noise ratio (SNR) significantly without any loss of weak early arrival path in the Non-line of sight (NLOS) multipath environments.

Integrated Sensing and Communications With Joint Beam-Squint and Beam-Split for mmWave/THz Massive MIMO

Integrated sensing and communications (ISAC) has attracted tremendous attention for the future 6G wireless communications systems. To improve the transmission rates and sensing accuracy, massive multi-input multi-output (MIMO) technique is leveraged with large transmission bandwidth in millimeter wave (mmWave)/terahertz (THz) band. However, the growing size of antenna array and transmission bandwidth results in the beam-squint effect, which hampers the performance of communications. Moreover, the time overhead of the traditional sensing algorithm is prohibitively high for practical systems. In this paper, instead of alleviating the beam-squint effect, we take advantage of joint beam-squint and beam-split effect and propose a novel integrated sensing and communications scheme for massive MIMO system. Specifically, with the beam-squint effect, the base station (BS) utilizes the true-time-delay (TTD) lines to steer the beams of different OFDM subcarriers towards distributive directions simultaneously. Different users then feedback their respective subcarrier frequency with the maximum array gain to BS, based on which BS could calculate the directions of the users. Moreover, by selecting sub-array with the inter-antenna spacing larger than half-wavelength, the beam-split effect can be introduced and exploited to expand the sensing range. The proposed sensing method operates over frequency-domain, and the intended sensing range is covered by all the subcarriers simultaneously, which significantly reduces the time overhead compared to the conventional sensing scheme. Simulation results have demonstrated the effectiveness as well as the superior performance of the proposed ISAC scheme.

Design and Research of Channel Circuit Based on Broadband Power Line Carrier

In order to effectively improve the anti-attenuation, anti-noise and anti-impedance change capabilities of the low-voltage narrowband power line carrier communication unit, reduce the carrier signal coupling attenuation, and highly fidelity signal power encoded and modulated by the carrier chip, an improved high-speed power line carrier communication transceiver circuit is designed. Using 303.13kHz~357.81kHz as sub-carrier signal frequency can effectively avoid the random noise generated by high-power power electronic equipment and household appliances below 35kHz. At the same time, to prevent the frequency crosstalk of power line carrier products with 270kHz and 421kHz as the center frequency, the Y-coupling capacitor and sixth order Butterworth band-pass filter circuit are used to design the signal receiving and transmitting circuit of the communication unit to isolate unwanted signals. The experimental simulation of the designed circuit is carried out on the circuit simulation software Multisim 12. The results show that the designed power line carrier communication transceiver circuit can effectively control the signal coupling attenuation within 4dB, and the filtering of unwanted signals can also reach 41.7dB, which has good application value.

Microwave photonic multiform microwave frequency shift keying signal generator.

A photonic approach to realizing multiform microwave frequency shift keying (FSK) signal generation is proposed and demonstrated. In the scheme, a commercial dual-polarization quadrature phase shift keying modulator (DP-QPSKM) is employed to generate two orthogonally-polarized signals containing specific optical sidebands, and a subsequent Sagnac loop structure govern the interference results of these two signals. From a theoretical analysis, when the modulators are properly biased, microwave FSK signal with fixed double relationship or flexibly tunable subcarrier frequencies can be obtained, and high frequency multiplication can be realized in the meantime. Furthermore, a photonic-optimized coherent demodulation structure is designed to recover the binary coding data, which can effectively avoid the electronic bottleneck. Simulation has been performed to investigate the mechanism and the discussions about the robustness to non-ideal parameters including DC bias, phase shift and polarization angle are also given. In the proof-of-concept experiment, microwave FSK signal with subcarrier frequencies of 2/4, 2.2/3.8, 2.4/3.6, 2.6/3.4, 2.8/3.2 GHz are generated, and the correct binary coding data is successfully recovered with the aid of simulation platform. The simulation and experimental results can verify the feasibility of the proposed multiform microwave FSK signal generator, which may find applications in modern radar and communication systems.

Using the spectral approach in image and arbitrary data processing

Introduction: The transfer of image processing operations to the spectral region is considered. Due to the duality of information representation, coding, filtering, compression and other transformations are possible both in the space of an object and in the region of spatial frequencies, in relation to its spatial spectrum. Purpose: To evaluate the efficiency of performing image processing operations and arbitrary digital information in the spectral domain. Results: A method for spectral holographic coding is proposed, which provides a gain in noise immunity by 7–8 dB and has less complexity of coding and decoding when changing redundancy over a wide range. During the coding process, the source data block is replaced by a code word, which is a linear one-dimensional hologram of a virtual point source. For transmission over a communication channel, we synthesize a signal with a given spectrum, the shape of which is a one-dimensional hologram, with its values rounded to one bit and the hologram itself being a sequence of zeros and ones – one means the presence of the corresponding harmonic in the spectrum, zero means the absence. To create a signal with such a line spectrum, it suffices to add a set of harmonics of equal amplitude with numbers corresponding to the position numbers of the units in the hologram. This operation is one of the types of orthogonal frequency division multiplexing, characterized in that the frequencies of the orthogonal subcarriers are in a multiple ratio, and amplitude shift keying is used as digital modulation. We propose a spectral method for image compression based on a detailed analysis of the spatial spectrum of an image and the removal of a large number of insignificant areas from it. Practical relevance: The reduction in the amount of information and, accordingly, the size of the image can be 4–8 times or more with a slight decrease in image quality.

A Highly Integrated Passive Wireless Sensing System With Synchronized Data Streaming of Multiple Tags

This article introduces a highly integrated passive wireless sensing system based on the extended electronic product code (EPC) Gen2 protocol, using sensor tags and a reader to support concurrent data streams from multiple sensors. Multiple subcarrier multiple access (MSMA) is used by assigning different subcarrier frequencies to the sensor tags for backscattering so that each tag has an independent channel for communication to achieve the simultaneous streaming of multisensor data. In order to improve the subcarrier frequency accuracy and further increase the number of communication channels, this article proposes a novel method of subcarrier frequency calibration based on the Gen2 protocol. This method enables a high-accuracy clock to be generated on-chip. At the same time, this article also proposes a method based on Gen2 protocol to start a group of tags and receive real-time data in parallel. The tag chip is fabricated in a <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$0.18{-}\mu \text{m}$ </tex-math></inline-formula> CMOS process with a die size of <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$850\,\,\mu \text{m}\,\,\times 850\,\,\mu \text{m}$ </tex-math></inline-formula> , and the reader prototype is built using software-defined radio equipment. The test results show that the sensing system proposed in this article can collect and recognize concurrent data streams from multiple sensor tags synchronously. The measured sensitivity of the sensor tag is −14.9 dBm with a 3-axis accelerating sensor, and the calibration accuracy of subcarrier frequency is better than <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">${\pm }{\mathrm {0.385}}$ </tex-math></inline-formula> kHz in the range of 40–640 kHz. With this accuracy, the tags can be allocated up to 78 subcarrier communication channels theoretically.

Dual-Sideband Constant-Envelope Frequency-Hopping Binary Offset Carrier Multiplexing Modulation for Satellite Navigation

Frequency-hopping binary offset carrier modulation improves the anti-interference performance and mitigates the autocorrelation function (ACF) ambiguity problem of binary offset carrier modulation. To save payload resources and make high-power amplifiers on satellites operate at the nonlinear saturation region, there is further demand for finding an efficient constant-envelope frequency-hopping binary offset carrier multiplexing technique to combine several signal components. Thus, we propose a dual-sideband constant-envelope multiplexing modulation, named asymmetric constant-envelope frequency-hopping binary offset carrier multiplexing (ACE-FHBOC), which is also a multicarrier constant-envelope multiplexing modulation. ACE-FHBOC provides higher design flexibility in the number of subcarrier frequencies than ACE-BOC while maintaining the same flexibility of signal design as ACE-BOC in the number of signal components and power ratio among components. We first establish the theory and give implementation methods of ACE-FHBOC. Then, we develop a software-defined receiver to simulate and analyze the performance for several specific ACE-FHBOC and ACE-BOC signals. The results show that the recommended ACE-FHBOC signals have lower ACF ambiguity, better anti-narrowband interference, and multipath performance than ACE-BOC under the same conditions. With these advantages, ACE-FHBOC is a promising solution for the signal design of new generation global navigation satellite systems.

Performance of DSSS Signal Transmission with SCM over Low-Frequency MMF Passbands

The transmission of a high data rate signal over low-frequency passbands of multimode fibers is studied in this paper. The subcarrier multiplexing (SCM) technique is applied to mitigate the frequency-selective nature of the passbands, at which many nulls can degrade the signal transmission. The subcarrier frequencies must be chosen appropriately, especially for some low-frequency passbands; otherwise, poorly received subcarrier signals will be obtained, affecting the entire transmission. Rather than transmitting many subcarrier signals over these passbands, the direct sequence spread spectrum (DSSS) technique can be adopted. In this work, a high data rate signal is transmitted over 1 km of multimode fiber using the 3-dB modal band and six other low-frequency passbands. The signal is separated into four sub-signals transmitted over four different channels: the 3-dB modal band, two low-frequency passbands, and one passband (containing four low-frequency passbands). In the last passband, the sub-signal is transmitted using the DSSS, while the other sub-signals are transmitted through amplitude shift keying (ASK) modulation. The performance of the system is determined using the bit error rate (BER). The findings reveal that by applying the DSSS to some low-frequency passbands, robustness is obtained in the subcarrier frequency for use in the DSSS passband. A BER lower than 10-9 with a total data rate of 600 Mbps is achieved. This data rate is three times higher than the data rate obtained by the 3-dB modal band. This performance is achieved without applying any error-correction code.

An Alternative Experimental Method for Determination of Light Beam Attenuation Coefficient in Underwater Wireless Optical Communication

In wireless optical communication systems, the transmission of optical signals via the channel (air or water) is affected by absorption and scattering. These reduce the signal strength (attenuation) and transmission distance of the signals. In pure water, the blue-green region of the visible light gives low attenuation. Some models have been developed to characterize the underwater optical channel such as Beer Lambert’s law, Radiative Transfer equation and Monte Carlo model. In underwater optical communication, optical power meters are an invaluable tool in the determination of attenuation coefficients. However, optical power meters for underwater optical communication are very expensive. There is a need to be able to determine the attenuation in the underwater optical communication channel at a low cost, especially in the absence of underwater optical power meters. In this paper, we present an alternative low-cost experimental method of obtaining the approximate attenuation coefficient of the visible light beam in underwater optical wireless communication without the use of optical power meters. A wireless visible light communication system was set up experimentally for underwater measurements involving an oscilloscope as the only measuring device. The system uses sub-carrier frequency modulation; a white light-emitting diode array for the transmitter, and a solar panel at the receiver front end. A theoretical transmission model was developed from the experimental setup based on the line of sight method in an unbounded medium, Beer Lambert’s law, and the received sub-carrier signals; in order to provide an alternative method of determining approximately the attenuation coefficient of the underwater medium. Experiments were performed in air, clear water and in saline water. The attenuation in the air was used as a reference upon which attenuation in the clear water and the saline water was based. The saline water has a salt concentration of 6.7 g/100 mL by weight and a total dissolved solid of 86.2 ppt. The trend of the measured received sub-carrier signals showed deviation from the developed theoretical model, and the model was therefore adjusted to conform to the experimental results. From the adjusted model, the attenuation coefficient of 0.0007379 cm-1 and 0.02447 cm-1 were obtained for clear water and the saline water respectively. The method is simple, straightforward, easy to set up in a laboratory, low cost and can be applied to visible light of any wavelength.

Intelligent dynamic data perturbation OCDM encryption scheme based on cellular neural network and biological genetic encoding.

In this paper, an intelligent dynamic perturbation orthogonal chirp division multiplexing (OCDM) encryption scheme based on cellular neural network and biological genetic encoding for seven-core optical fiber is proposed for the first time to our knowledge. In this scheme, chaotic sequences generated by cellular neural network are employed to construct six masking vectors to achieve six dimensions of ultra-high security encryption. The transmitted bit data is interleaved according to the DNA operation rules. The subcarrier frequency, symbol matrix, and time are scrambled. Because the selected encoding rule, decoding rule, key base sequence, subcarrier frequency, symbol matrix, and scrambling position of time all change dynamically, the robustness against malicious attack is enhanced. Simultaneously, OCDM technology is employed to optimize the system, which effectively improves the anti-interference ability and bit error performance of the system. A 70 Gb /s (7×10 Gb /s) encrypted OCDM signal transmission experiment is carried out on a 2 km 7-core fiber, and an orthogonal frequency division multiplexing (OFDM) signal is transmitted under the same conditions for comparison and verification. The results show that the key space of the newly proposed encryption scheme can reach 101170, and the receiver sensitivity of OCDM is 1.2 dB greater than that of OFDM when the bit error rate is 10-3. The scheme can improve the security of encrypted information and the performance of the system, which is very promising in the optical access network of the future.

A 1.15-mW Low-Power Low-Complexity Reconfigurable FM-UWB Transmitter

A 1.15-mW 3.75–4.25-GHz frequency-modulated ultrawideband (FM-UWB) transmitter (TX) is fabricated in 65-nm CMOS, with digitally reconfigurable subcarrier frequencies, UWB bandwidth, and radio frequency (RF) frequency band. Low-complexity submodules are utilized with significant power savings. An ultralow-current hybrid module is for bandgap reference (BGR) and power-ON reset (POR), and a single-ended crystal oscillator (XO) generates a 12-MHz clock reference. A dual-path ring voltage-controlled oscillator (VCO) conducts linear RF FM, followed by a push–pull power amplifier (PA) for 100-kb/s wireless data transmission. A differential relaxation oscillator (OSC) is for subcarrier generation, and an intermittent dual-mode frequency calibration loop ensures system robustness. Experimental results show that the presented FM-UWB TX successfully generates an Federal Communications Commission (FCC)-compliant UWB signal, with an energy efficiency of 11.5 nJ/bit and an active area of 0.21 mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> from a 1-V supply. The 2.25- <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\mu \text{A}$ </tex-math></inline-formula> hybrid BGR and POR achieves a temperature coefficient of 32 ppm/°C, a line regulation of 2.3%/V, a supply-ramp-rate-tolerant power-ON, and brown-out function. The 40- <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\mu \text{W}$ </tex-math></inline-formula> XO features a low-frequency inaccuracy of 4 ppm/V. The 40- <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\mu \text{A}$ </tex-math></inline-formula> relaxation OSC provides the reconfigured two-frequency shift keying (FSK) triangular amplitude and frequency. The 2.79–5.18-GHz 0.6-mW ring VCO is capable of providing the phase noise performance of −77 dBc/Hz at the 1-MHz offset, followed by the 0.45-mW PA having the output power higher than −14 dBm and the peak power-added efficiency (PAE) of 29.6%. All these benefit low-power low-cost TX implementation, where the carrier and subcarrier frequencies are calibrated by an intermittent digital loop with omitted power dissipation.

Secure OFDM transmission scheme based on chaotic encryption and noise-masking key distribution.

In this Letter, we propose a secure orthogonal frequency division multiplexing (OFDM) transmission scheme based on chaotic encryption and noise-masking key distribution. With the implementation of a three-dimensional digital chaotic system, the security performance is effectively enhanced by scrambling the phase, symbol, and subcarrier frequency of the OFDM signal. The proposed noise-masking key distribution can mask the key information of the chaotic system into noise and transmit it with the chaotic encrypted signal simultaneously. By this mechanism, the legal receiver can realize uninterrupted authentication and decryption even if the key is constantly updated. Transmission of a 62.2-Gb/s quadrature phase shift keying (QPSK) and 124.4-Gb/s 16 quadrature amplitude modulation (16QAM) OFDM signal over a 2-km 7-core fiber using the proposed scheme is experimentally demonstrated. The results show that the proposed scheme can realize security enhancement and cost-effective key distribution without significant bit error ratio (BER) performance degradation.

An Efficient ICI Cancellation Scheme to Mitigate the Effect of ICI on OFDM Systems.

Inter-carrier interference (ICI) emerges in orthogonal frequency division multiplexing (OFDM) systems used for mobile communication as a consequence of the Doppler Effect's loss of orthogonality among subcarriers. Inter-Carrier Interference (ICI), which affects every subcarrier, drastically lowers performance. The performance of OFDM systems may be enhanced using a variety of ICI mitigation strategies. Comparable subcarrier frequency offsets are guaranteed by the premise that the OFDM transmission bandwidth is suitably modest in the majority of ICI mitigation strategies, on the other hand. The frequency offsets between each subcarrier might change, hence a wideband OFDM system in a situation with high mobility is investigated. Furthermore, the suggested ICI cancellation approach, Total ICI Cancellation, does not reduce bandwidth efficiency or transmission rate. As an example, the Total ICI Cancellation approach uses the ICI matrix's orthogonality to provide perfect ICI cancellation and a significant boost in BER at a linearly increasing cost. The suggested technique, which matches the BER performance of a wideband OFDM system without ICI, offers the best BER performance possible in the presence of frequency offset and time shifts in the channel, according to simulation findings in the AWGN and multipath fading channels.