Subchronic Systemic Toxicity Research Articles

The antimicrobial peptide Microcin C7 inhibits the growth of Porphyromonas gingivalis and improves the perodontal status in a rat model.

This study aimed to investigate the antibacterial and anti-inflammatory effects of the antimicrobial peptide Microcin C7 for Porphyromonas gingivalis-associated diseases. Reverse-phase high-performance liquid chromatography revealed that Microcin C7 could remain 25.5% at 12 hours in saliva. At a concentration of <10mg mL-1, Microcin C7 showed better cytocompatibility, as revealed by hemolysis test and subchronic systemic toxicity test. Moreover, the minimum inhibitory concentration and minimum bactericidal concentration of Microcin C7 were analyzed using a broth microdilution method, bacterial growth curve, scanning electron microscopy, and confocal laser microscopy and determined to be 0.16mg mL-1 and 5mg mL-1, respectively. Finally, in a rat model, 5mg mL-1 Microcin C7 showed better performance in decreasing the expression of inflammatory factors (IL-1β, IL-6, IL-8, and TNF-α) and alveolar bone resorption than other concentrations. Microcin C7 demonstrated favorable biocompatibility, antibacterial activity, anti-inflammatory effect, and could decrease the alveolar bone resorption in a rat model, indicating the promising potential for clincal translation and application on P. gingivalis-associated diseases.

Biosafety and chemical solubility studies of multiscale crystal-reinforced lithium disilicate glass-ceramics.

Lithium disilicate (Li2 Si2 O5 ) glass-ceramics are currently a more widely used all-ceramic restorative material due to their good mechanical properties and excellent aesthetic properties. However, they have a series of problems such as high brittleness and low fracture toughness, which has become the main bottleneck restricting its development. Therefore, in order to compensate for these shortcomings, we propose to prepare a reinforced glass-ceramics with better mechanical properties and to test the biosafety and chemical solubility of the material. Li2 Si2 O5 whiskers were synthesized by a one-step hydrothermal method, and multi-scale crystal-enhanced Li2 Si2 O5 glass-ceramics were prepared by reaction sintering. The biosafety of multi-scale crystal-reinforced Li2 Si2 O5 glass-ceramics was investigated by in vitro cytotoxicity test, rabbit pyrogen test, mice bone marrow micronucleus test, skin sensitization test, sub-chronic systemic toxicity test, and chronic systemic toxicity test. Additionally, the chemical solubility of multi-scale crystal-reinforced Li2 Si2 O5 glass-ceramics was investigated. The test results showed that the material was non-cytotoxic, non-thermogenic, non-mutagenic, non-sensitizing, and non-systemic. The chemical solubility, determined to be 377 ± 245 μg/cm2 , complied with the ISO 6872 standard for the maximum solubility of ceramic materials. Multi-scale crystal-reinforced Li2 Si2 O5 glass-ceramics' biosafety and chemical solubility met current normative criteria, and they can move on to mechanical property measurements (such as flexural strength test, fatigue life test, friction and wear property study, etc.) and bonding property optimization, which shows promise for future clinical applications.

Towards the Clinical Translation of 3D PLGA/β-TCP/Mg Composite Scaffold for Cranial Bone Regeneration.

Recent years have witnessed the rapid development of 3D porous scaffolds with excellent biocompatibility, tunable porosity, and pore interconnectivity, sufficient mechanical strength, controlled biodegradability, and favorable osteogenesis for improved results in cranioplasty. However, clinical translation of these scaffolds has lagged far behind, mainly because of the absence of a series of biological evaluations. Herein, we designed and fabricated a composite 3D porous scaffold composed of poly (lactic-co-glycolic) acid (PLGA), β-tricalcium phosphate (β-TCP), and Mg using the low-temperature deposition manufacturing (LDM) technique. The LDM-engineered scaffolds possessed highly porous and interconnected microstructures with a porosity of 63%. Meanwhile, the scaffolds exhibited mechanical properties close to that of cancellous bone, as confirmed by the compression tests. It was also found that the original composition of scaffolds could be maintained throughout the fabrication process. Particularly, two important biologic evaluations designed for non-active medical devices, i.e., local effects after implantation and subchronic systemic toxicity tests, were conducted to evaluate the local and systemic toxicity of the scaffolds. Additionally, the scaffolds exhibited significant higher mRNA levels of osteogenic genes compared to control scaffolds, as confirmed by an in vitro osteogenic differentiation test of MC3T3-E1 cells. Finally, we demonstrated the improved cranial bone regeneration performance of the scaffolds in a rabbit model. We envision that our investigation could pave the way for translating the LDM-engineered composite scaffolds into clinical products for cranial bone regeneration.

Biaxial stretching of polytetrafluoroethylene in industrial scale to fabricate medical ePTFE membrane with node-fibril microstructure.

Expanded polytetrafluoroethylene (ePTFE) is promising in biomedical fields such as covered stents and plastic surgery owing to its excellent biocompatibility and mechanical properties. However, ePTFE material prepared by the traditional biaxial stretching process is with thicker middle and thinner sides due to the bowing effect, which poses a major problem in industrial-scale fabrication. To solve this problem, we design an olive-shaped winding roller to provide the middle part of the ePTFE tape with a greater longitudinal stretching amplitude than the two sides, so as to make up for the excessive longitudinal retraction tendency of the middle part when it is transversely stretched. The as-fabricated ePTFE membrane has, as designed, uniform thickness and node-fibril microstructure. In addition, we examine the effects of mass ratio of lubricant to PTFE powder, biaxial stretching ratio and sintering temperature on the performance of the resultant ePTFE membranes. Particularly, the relation between the internal microstructure of the ePTFE membrane and its mechanical properties is revealed. Besides stable mechanical properties, the sintered ePTFE membrane exhibits satisfactory biological properties. We make a series of biological assessments including in vitro hemolysis, coagulation, bacterial reverse mutation and in vivo thrombosis, intracutaneous reactivity test, pyrogen test and subchronic systemic toxicity test; all of the results meet the relevant international standards. The muscle implantation of the sintered ePTFE membrane into rabbits indicates acceptable inflammatory reactions of our sintered ePTFE membrane fabricated on industrial scale. Such a medical-grade raw material with the unique physical form and condensed-state microstructure is expected to afford an inert biomaterial potentially for stent-graft membrane.

Biocompatibility of novel albumin-aldehyde surgical adhesive

Many medical procedures could benefit from the use of tissue sealants which allow for reduced surgery time, limited blood loss, easier tissue handling, and fewer postoperative complications. The safety and biocompatibility of surgical sealants are of paramount importance therefore, the aim of this study is to investigate the biocompatibility of NE’X Glue Surgical Adhesive. Chemical characterization (VOC and elements), cytotoxicity (MEM elution), genotoxicity (AMES and MLA), endotoxin contamination, sensitization potential, intracutaneous reactivity, acute and subchronic systemic toxicity with implantation as well as pyrogenicity were evaluated to investigate the biocompatibility of the NE’X Glue Surgical Adhesive. Studies were conducted according to ISO 10993 standards. The biocompatibility requirements with accordance to ISO 10993-1 for NE'X Glue were met. In vitro studies showed that NE'X Glue surgical adhesive is non-cytotoxic and non-mutagenic. Also, in vivo studies demonstrated that NE'X Glue shows no signs of toxicity, has no pyrogenic potential, and is non-sensitizing and non-irritating. The chemical characterization showed that no compounds were identified above Analytical Evaluation Threshold (AET), and no elements with concentrations higher than element-specific PDE (µg/day) were detected. NE'X Glue Surgical Adhesive is a versatile and promising new surgical sealant with a wide range of potential applications and very good*0* biocompatibility.

Cellular and sub-chronic toxicity of hydroxyapatite porous beads loaded with antibiotic in rabbits, indented for chronic osteomyelitis

Bioceramics have emerged as a hopeful remedy for site-specific drug delivery in orthopaedic complications, especially in chronic osteomyelitis. The bioresorbable nature of bioceramic materials shaped them into a versatile class of local antibiotic delivery systems in the treatment of chronic osteomyelitis. Hydroxyapatite (HA) based bioceramics with natural bone mimicking chemical composition are of particular interest due to their excellent biocompatibility, better osteoconductive and osteointegrative properties. Although HA has been widely recognized as an efficient tool for local delivery of antibiotics, information regarding its subchronic systemic toxicity have not been explored yet. Moreover, a detailed investigation of in vivo subchronic systemic toxicity of HA is critical for understanding its biocompatibility and futuristic clinical applications of these materials as novel therapeutic system in its long haul. Evaluation of biocompatibility and sub-chronic systemic toxicity are significant determinants in ensuring biomedical device’s long-term functionality and success. Sub-chronic systemic toxicity allows assessing the potential adverse effects caused by leachable and nanosized wear particles from the device materials under permissible human exposure to the distant organs that are not in direct contact with the devices. In this context, the present study evaluates the sub-chronic systemic toxicity of in-house developed Hydroxyapatite porous beads (HAPB), gentamicin-loaded HAPB (HAPB + G) and vancomycin- loaded HAPB (HAPB + V) through 4 and 26-week muscle implantation in New Zealand white rabbits, as per ISO 10993–6 and ISO 10993–11. Analysis of cellular responses of HAPB towards Human Osteosarcoma (HOS) cell line through MTT assay, direct contact cytotoxicity, live/dead assay based on Imaging Flow Cytometry (IFC) showed its non-cytotoxic behaviour. Histopathological analysis of muscle tissue, organs like heart, lungs, liver, kidney, spleen, adrenals, intestine, testes, ovaries, and uterus did not reveal any abnormal biological responses. Our study concludes that the HAPB, gentamicin-loaded HAPB (HAPB + G) and vancomycin-loaded HAPB (HAPB + V) are biocompatible and did not induce sub-chronic systemic toxicity and hence satisfies the criteria for regulatory approval of HAs as a plausible candidate for clinical applications.

Polydioxanone-Based Membranes for Bone Regeneration.

Resorbable synthetic and natural polymer-based membranes have been extensively studied for guided tissue regeneration. Alloplastic biomaterials are often used for tissue regeneration due to their lower immunoreactivity when compared with allogeneic and xenogeneic materials. Plenum® Guide is a synthetic membrane material based on polydioxanone (PDO), whose surface morphology closely mimics the extracellular matrix. In this study, Plenum® Guide was compared with collagen membranes as a barrier material for bone-tissue regeneration in terms of acute and subchronic systemic toxicity. Moreover, characterizations such as morphology, thermal analysis (Tm = 107.35 °C and crystallinity degree = 52.86 ± 2.97 %, final product), swelling (thickness: 0.25 mm ≅ 436% and 0.5 mm ≅ 425% within 24 h), and mechanical tests (E = 30.1 ± 6.25 MPa; σ = 3.92 ± 0.28 MPa; ε = 287.96 ± 34.68%, final product) were performed. The in vivo results revealed that the PDO membranes induced a slightly higher quantity of newly formed bone tissue than the control group (score: treated group = 15, control group = 13) without detectable systemic toxicity (clinical signs and evaluation of the membranes after necropsy did not result in differences between groups, i.e., non-reaction -> tissue-reaction index = 1.3), showing that these synthetic membranes have the essential characteristics for an effective tissue regeneration. Human adipose-derived stem cells (hASCs) were seeded on PDO membranes; results demonstrated efficient cell migration, adhesion, spread, and proliferation, such that there was a slightly better hASC osteogenic differentiation on PDO than on collagen membranes. Hence, Plenum® Guide membranes are a safe and efficient alternative for resorbable membranes for tissue regeneration.

Study of No Observed Adverse Effect Level of Nickel and Its Preliminary Evaluation Biocompatibility

The purpose of this study was to investigate the NOAEL of the nickel ion and provide with basic data for the biological evaluation of those medical devices containing nickel. Five groups SD rats were repeatedly exposed during 14 d respectively to nickel at first stage doses of 4.9, 3.7, 2.5 mg/(kg.d), and the second stage doses of 1.2, 0.25 mg/(kg.d) by the intravenous route. The results showed that the NOAEL of nickel ion is 0.25 mg/(kg.d) for SD rats, and the result was verified by subchronic systemic toxicity test of nickel alloy. The threshold of toxicological concern (TTC) of nickel is 150 μg/d (based on application of 100-fold uncertainty factor and a body weight of 60 kg)deduced by these data.

In vivo biological safety evaluation of an iron-based bioresorbable drug-eluting stent.

Bioresorbable stents (BRS) are investigated and designed to revascularize occluded arteries. The iron-based bioresorbable stent is a promising device in interventional therapies, although it's corrosion and bioresorption rate remain challenging. In this work, we introduced a novel nitrided iron coronary stent (IBS) with enhanced degradation rate compared with pure iron stent. To evaluate the biosafety of this device, a sub-chronic systemic toxicity study was conducted and a stainless steel stent (Supporter™) served as a control. Here, the bioresorbable stent was first evaluated in rat abdominal aortic implantation model. When subjected to exaggerated exposure dose, no clinical signs of toxicity or mortality were observed in either, the IBS group or the control group. Histopathological examinations showed the corrosion particles of iron were encapsulated by fibrocytes and engulfed by macrophages, indicating that the degradation of iron was in the early stage. Our results demonstrated that the nitrided iron stent did not induce systemic toxicity under the experimental conditions.

In vivo evaluation of the subchronic systemic toxicity of akermanite bioceramic for bone regeneration following ISO standard methods.

Although the akermanite (Ca2MgSi2O7) bioceramic has been confirmed to possess favorable osteogenic activity, until now little was known about its in vivo subchronic systemic toxicity, which is important for determining the biocompatibility and the clinical applications of the material in bone implants. In this study, the subchronic systemic toxicity of akermanite bioceramic was for the first time investigated according to well-accepted ISO standard methods. Following the method, healthy adult Wistar rats were injected with certain amounts of extracts of akermanite bioceramic that was intended to simulate the ionic product during the degradation of the material when implanted into the body. At day 28 after injection, the general body conditions, blood cytology, blood biochemistry and histology of all important organs of the rats were examined. The results showed that there was no significant difference in the hemoglobin concentration, red blood cell count, platelet count and white blood cell count between the rats with injection of akermanite bioceramic extracts and the saline control. The indicators of liver function, including aspartate aminotransferase and alkaline phosphatase, and kidney function, including blood urea nitrogen and creatinine, did not show significant difference between the two groups (P > 0.05). In addition, the results of histological examination showed that the extract of akermanite bioceramic did not cause any pathological changes to important organs such as the heart, liver and kidneys. These findings demonstrated that the ionic product derived from the degradation of akermanite bioceramic did not cause in vivo subchronic systemic toxicity. The results of the current study provided more strengthened evidence for the biosafety of akermanite bioceramic and suggest that this material with desirable biocompatibility may be a potential candidate for orthopedic clinical applications.

Studies of acute and subchronic systemic toxicity associated with a copper/low-density polyethylene nanocomposite intrauterine device.

IntroductionThe physiologic safety of devices and materials intended for clinical implantation should be evaluated. This study, a logical extension of our previous work, aimed to investigate the safety of a novel contraceptive device, the copper/low-density polyethylene nanocomposite intrauterine device (nano-Cu/LDPE IUD), through studies of its potential toxicity after acute and subchronic administration in mice and rats.MethodsFor the acute toxicity study, single 50 mL/kg doses of nano-Cu/LDPE IUD extracts were administered to mice via intravenous or intraperitoneal injection. General behavioral adverse effects, mortality, and body weights were evaluated for up to 72 hours. In the 13-week subchronic toxicity study, the nano-Cu/LDPE composite with 10-fold higher than the standard clinical dose was implanted subcutaneously into the dorsal skin of Wistar rats. The control group underwent a sham procedure without material insertion.ResultsDuring all acute study observation times, the biologic reactions of the mice in the nano-Cu/LDPE group did not differ from those observed in the control group. The groups did not differ statistically in terms of body weight gain, and no macroscopic changes were observed in any organs. In the subchronic study, no clinical signs of toxicity or mortality were observed in either the nano-Cu/LDPE or control group during the 13-week period. The nano-Cu/LDPE composite did not cause any alterations in body weight, food consumption, hematologic and biochemical parameters, or organ weight relative to the control for any observed sample group. Histopathologic examinations of the organs revealed normal architecture, indicating that the inserted material did not cause morphologic disturbances in the rats.ConclusionOverall, the results indicate that the nano-Cu/LDPE IUD did not induce systemic toxicity under experimental conditions of the recommended standard practices, suggesting that the novel material IUD is safe and feasible for future contraceptive applications.

A critical review of the application of polymer of low concern and regulatory criteria to fluoropolymers.

Per- and polyfluoroalkyl substances (PFAS) are a group of fluorinated substances that are in the focus of researchers and regulators due to widespread presence in the environment and biota, including humans, of perfluorooctane sulfonate (PFOS) and perfluorooctanoic acid (PFOA). Fluoropolymers, high molecular weight polymers, have unique properties that constitute a distinct class within the PFAS group. Fluoropolymers have thermal, chemical, photochemical, hydrolytic, oxidative, and biological stability. They have negligible residual monomer and oligomer content and low to no leachables. Fluoropolymers are practically insoluble in water and not subject to long-range transport. With a molecular weight well over 100 000 Da, fluoropolymers cannot cross the cell membrane. Fluoropolymers are not bioavailable or bioaccumulative, as evidenced by toxicology studies on polytetrafluoroethylene (PTFE): acute and subchronic systemic toxicity, irritation, sensitization, local toxicity on implantation, cytotoxicity, in vitro and in vivo genotoxicity, hemolysis, complement activation, and thrombogenicity. Clinical studies of patients receiving permanently implanted PTFE cardiovascular medical devices demonstrate no chronic toxicity or carcinogenicity and no reproductive, developmental, or endocrine toxicity. This paper brings together fluoropolymer toxicity data, human clinical data, and physical, chemical, thermal, and biological data for review and assessment to show that fluoropolymers satisfy widely accepted assessment criteria to be considered as "polymers of low concern" (PLC). This review concludes that fluoropolymers are distinctly different from other polymeric and nonpolymeric PFAS and should be separated from them for hazard assessment or regulatory purposes. Grouping fluoropolymers with all classes of PFAS for "read across" or structure-activity relationship assessment is not scientifically appropriate. Integr Environ Assess Manag 2018;14:316-334. © 2018 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals, Inc. on behalf of Society of Environmental Toxicology & Chemistry (SETAC).

Subchronic Systemic Toxicity of New Endodontic Material Based on Calcium Hydroxyapatite and Calcium Silicates

As an alternative to MTA, a new endodontic material based on hydroxyapatite and calcium silicates (ALBO‐MPSA) has been synthesized, and its biocompatibility has been studied in many in vitro and in vivo studies. The current study aims to evaluate a subchronic systemic toxicity of ALBO‐MPSA on the rat animal model, as a continuation of the previous studies. Biochemical parameters of blood and histological parameters of the liver, kidneys, and spleen of the rats were analyzed after 120 days of consumption of the aqueous extract of ALBO‐MPSA. The results showed no myelotoxic effect or autoimmune effect on peripheral blood cells and no pathological effect on the liver, kidney, and spleen tissues. Besides, no changes in the skin and hair of the rats, neither the change in the consumption of food and water, nor the change in their usual behavior were noticed during the experiment.

Mechanical Properties and in Vitro and in Vivo Biocompatibility of a-C/a-C:Ti Nanomultilayer Films on Ti6Al4V Alloy as Medical Implants.

Hydrogen-free a-C/a-C:Ti nanomultilayer films are deposited on medical Ti6Al4V alloy using a closed field unbalanced magnetron sputtering under graded bias voltage. The mechanical and tribological properties of the nanomultilayer films are performed on the nanoindentor, Rockwell and scratch tests, and ball-on-disk tribometer. The biological properties are evaluated by cell cytotoxicity, genotoxicity, subchronic systemic toxicity and implant. The hard a-C/a-C:Ti nanomultilayer films on medical alloy exhibit high adhesion strength and excellent tribological properties in both ambient air and Hank's solution. Biocompatibility results reveal the film no cytotoxity, no genotoxicity, no subchronic systemic toxicity and no contraindications in implant systems. Because of excellent mechanical properties and biosafety, the carbon-based films on medical alloy unveils a prospective application in medical implants.

Mechanical-chemical analyses and sub-chronic systemic toxicity of chemical treated organic bovine bone

Sequentially chemical-treated bovine bone was not only evaluated by mechanical and chemical analyses but also implanted into the gluteal muscles of rats for 12 weeks to investigate potential local pathological effects and systemic toxicities. The test (chemical treated bone) and control (heat treated bone) materials were compared using scanning electron microscope (SEM), x-ray diffraction pattern, inductively coupled plasma analysis, and bending strength test. In the SEM images, the micro-porous structure of heat-treated bone was changed to sintered ceramic-like structure. The structure of bone mineral from test and control materials was analyzed as100% hydroxyapatite. The ratio of calcium (Ca) to potassium (P), the main inorganic elements, was same even though the Ca and P percentages of the control material was relatively higher than the test material. No death or critical symptoms arose from implantation of the test (chemical treated bone) and control (physiological saline) materials during 12 weeks. The implanted sites were macroscopically examined, with all the groups showing non-irritant results. Our results indicate that chemical processed bovine bone has a better mechanical property than the heat treated bone and the implantation of this material does not produce systemic or pathological toxicity.

Some inferences from in vivo experiments with metal and metal oxide nanoparticles: the pulmonary phagocytosis response, subchronic systemic toxicity and genotoxicity, regulatory proposals, searching for bioprotectors (a self-overview).

The purpose of this paper is to overview and summarize previously published results of our experiments on white rats exposed to either a single intratracheal instillation or repeated intraperitoneal injections of silver, gold, iron oxide, copper oxide, nickel oxide, and manganese oxide nanoparticles (NPs) in stable water suspensions without any chemical additives. Based on these results and some corroborating data of other researchers we maintain that these NPs are much more noxious on both cellular and systemic levels as compared with their 1 μm or even submicron counterparts. However, within the nanometer range the dependence of systemic toxicity on particle size is intricate and non-unique due to complex and often contra-directional relationships between the intrinsic biological aggressiveness of the specific NPs, on the one hand, and complex mechanisms that control their biokinetics, on the other. Our data testify to the high activity of the pulmonary phagocytosis of NPs deposited in airways. This fact suggests that safe levels of exposure to airborne NPs are possible in principle. However, there are no reliable foundations for establishing different permissible exposure levels for particles of different size within the nanometric range. For workroom air, such permissible exposure levels of metallic NP can be proposed at this stage, even if tentatively, based on a sufficiently conservative approach of decreasing approximately tenfold the exposure limits officially established for respective micro-scale industrial aerosols. It was shown that against the background of adequately composed combinations of some bioactive agents (comprising pectin, multivitamin-multimineral preparations, some amino acids, and omega-3 polyunsaturated fatty acid) the systemic toxicity and even genotoxicity of metallic NPs could be markedly attenuated. Therefore we believe that, along with decreasing NP-exposures, enhancing organisms’ resistance to their adverse action with the help of such bioprotectors can prove an efficient auxiliary tool of health risk management in occupations connected with them.

Tissue response to implants of hyaluronic acid hydrogel prepared by microbeads

Hyaluronic acid hydrogels (HAHs) were synthesized by immersing the HA microbeads crosslinked with divinyl sulfone in phosphate buffered saline solution to assess the responses of tissues to the implant by means of the subchronic systemic toxicity and the intradermal implant test. The HAHs, prepared by the microbeads with an average diameter of 140 μm and a swelling rate of 800 to 1200%, exhibited a porous network channeled with 10 μm pores. The HAHs retained their space and structure by maintaining over 95% of the initial volume 12 weeks after injection to a rabbit. The histological analysis indicated that an acute inflammation, occurred in the rabbit 4 weeks after injection, was alleviated dramatically after 8 weeks. No capsule was formed. The HAHs had no subchronic systemic toxicity under the condition of this study and were considered non-irritant. The implants were excellent in biological synthesis and transplantation as evidenced by non-capsule reaction and disappearance of inflammatory cells. It can be concluded that the implants of HAHs are clinically safe and effective.

Evaluation of reproductive/developmental and repeated dose (subchronic) toxicity and cytogenetic effects in rats of a roofing asphalt fume condensate by nose-only inhalation

A Type III Built-up Roofing Asphalt (BURA) fume condensate was evaluated for subchronic systemic toxicity and reproductive/developmental toxicity screening in Wistar rats, by OECD protocol 422 and OECD cytogenetic protocol 474. Animals were exposed by nose-only inhalation to target concentrations of 30, 100 and 300mg/m3 total hydrocarbons (actual concentrations, 30.0, 100.1 and 297.3mg/m3). The study was performed to assess potential hazards from asphalt fumes to which humans could be exposed during application. No adverse effects were seen for spermology, reproductive or developmental parameters or early postnatal development of offspring from day 1 to 4 postpartum. BURA fume condensate did not induce any significant increases in micronucleus frequency in polychromatic erythrocytes of rat bone marrow nor was neurobehavioral toxicity observed at any dose. Systemic effects were slight and seen at doses above those measured at work sites. The systemic NOAEC of 100mg/m3 for males was based on decreased body weight gain, food consumption and increased absolute and relative lung wet weight correlated with slight histological changes in the lung, primarily adaptive in nature at 300mg/m3. The female NOAEC of 30mg/m3 was based on a statistically significant increase in relative wet lung weight at higher doses, correlated with slight histopathologic effects in the lungs at the highest dose. However, no increase in relative lung weight was seen in breeding females at 100mg/m3.

Application of the threshold of toxicological concern approach for the safety evaluation of calendula flower (Calendula officinalis) petals and extracts used in cosmetic and personal care products

Calendula flower (Calendula officinalis) (CF) has been used in herbal medicine because of its anti-inflammatory activity. CF and C. officinalis extracts (CFE) are used as skin conditioning agents in cosmetics. Although data on dermal irritation and sensitization of CF and CFE’s are available, the risk of subchronic systemic toxicity following dermal application has not been evaluated. The threshold of toxicological concern (TTC) is a pragmatic, risk assessment based approach that has gained regulatory acceptance for food and has been recently adapted to address cosmetic ingredient safety. The purpose of this paper is to determine if the safe use of CF and CFE can be established based upon the TTC class for each of its known constituents. For each constituent, the concentration in the plant, the molecular weight, and the estimated skin penetration potential were used to calculate a maximal daily systemic exposure which was then compared to its corresponding TTC class value. Since the composition of plant extracts are variable, back calculation was used to determine the maximum acceptable concentration of a given constituent in an extract of CF. This paper demonstrates the utility and practical application of the TTC concept when used as a tool in the safety evaluation of botanical extracts.