Chemical Studies Research Articles

Heterocycles and a Sorbicillinoid from the Coral-Derived Fungus Penicillium chrysogenum

A detailed chemical study of the culture of a coral-derived fungus Penicillium chrysogenum resulted in the isolation and identification of four new aromatic heterocycles chrysoquinazolinones A–B (1–2) and chrysobenzothiazoles A–B (3–4), along with a new sorbicillinoid 4-carboxylsorbicillin (5). Chrysoquinazolinones A–B (1–2) combine a quinazolinone fragment with a bicyclo[2.2.2]octane or a pyrrolidone moiety, respectively, demonstrating the unexpected structures of marine natural products. Chrysobenzothiazoles A–B (3–4) possess a benzothiazole system and are the second isolation of this class of skeleton compounds from marine organisms. The existence of the pair of enantiomers (±3) was deduced by chiral HPLC analysis. Their structures and absolute configurations were elucidated by detailed spectroscopic analysis, comparison with the literature data, single-crystal X-ray crystallographic analysis and TDDFT-ECD calculations. Compound 5 exhibited moderate cytotoxicity against K562 and NCI-H446 cell lines, with IC50 values of 15.00 μM and 16.87 μM, respectively.

How Are The Science Process Skills of Prospective Science Teacher Students: Studies in Inorganic Chemistry and Gender

Prospective teacher students must be able to design practicums so that the learning process is meaningful. The skills that students develop in carrying out scientific discoveries, namely applying concepts, rules, and characteristics that exist in science, are called science process skills (SPS). Therefore, in building students' knowledge, students must have process skills in teaching so they can teach effectively and must have a good understanding of concepts and strong process skills. This research aims to describe the SPS of prospective science education teacher students through inorganic chemistry courses after going through learning with the discovery learning model. This research uses a quantitative approach with a pre-experimental design one-shot case study research method. The research results show that student SPS as a whole is in the high category with an average percentage of 59.71%. SPS analysis in classes A, B, and C, respectively, has an average percentage of 58.23%, 62.66%, and 58.24% in the high category. SPS analysis based on gender shows that the respective percentage of male students is 53.89% with the medium category for women and 59.81% for the high category.

Computational Studies of Molybdenum-Containing Metal–Sulfur and Metal–Hydride Clusters

The development of transition metal clusters is an active area of research in inorganic chemistry, as they can be used as catalysts to perform chemically or biologically relevant reactions. Computational chemistry, employing density functional theory (DFT), plays a key role in rationalizing the electronic structure and properties of transition metal clusters. This article reviews recent quantum chemical studies of Mo3S4M clusters (M = Fe, Co, Ni), their CO- or N2-bound variants, and metal–hydride clusters. The ground state of the cluster systems was computed, and properties such as metal–metal bonding, orbital interactions, fluxional behavior of ligands, spectroscopy, and reaction mechanisms were rationalized and compared with available experimental results. Our research findings evidence that computational studies employing quantum chemical methods can guide experimental researchers to develop novel transition metal clusters for potential applications in catalysis.

Quantum Chemistry Study on Cl-Initiated Reactions of 2-Chloropropane and 2-Methylpropanoyl Halogen (Cl, Br, F): Mechanism, Kinetics, and Atmospheric Implications.

Halogenated volatile organic compounds (HVOCs) pose significant bioaccumulative and toxicological risks, necessitating effective strategies for their removal. Here, we show, through a computational study employing density functional theory and coupled cluster methods, the detailed mechanism and kinetic properties of Cl-initiated degradation reactions of 2-chloropropane (2-CP, (CH3)2CHCl) and 2-methylpropanoyl halide ((CH3)2CHCOX, X = Cl, Br, F). The reaction rate constants of all the channels were calculated by the canonical variational transition state theory (CVT) with the correction of the small curvature tunneling effect (SCT) at 200-1000 K. The subsequent transformation pathways of the major radical products of (CH3)2CHCl and (CH3)2CHCOCl in the presence of O2, NO, and HO2 radical were investigated. The results elucidate the reaction pathways and rate constants, which are in excellent agreement with the experimental data at 296 K. We further explore the atmospheric implications of these reactions by assessing the atmospheric lifetime (τ) and ozone depletion potential (ODP). Additionally, we delve into the aquatic toxicity and bioaccumulation potential of the reactants and their transformation products. This study not only advances our knowledge of the atmospheric fate of halogenated hydrocarbons but also underscores the importance of considering the environmental and toxicological impacts in the development of HVOC mitigation strategies.

Affecting Charges and Structures of {Bi6} Architectures by 12‐Electron Transition Metal Fragments

AbstractMolecules based on polyatomic bismuth substructures are currently attracting a lot of attention owing to this heavy and essentially non‐toxic element's uncommon chemical and physical properties, which include unprecedented bonding properties. Hexaatomic {Bi6} substructures that underly more complex cluster structures were recently reported to adopt different structures or exhibit different structural details as a consequence of the charge of the {Bi6} unit. This leads to either crown‐shaped cycles for a nominal Bi66− or differently distorted trigonal prisms for compositions close to Bi62−. It was predicted by quantum chemistry that Bi64− should adopt a distinctly distorted boat‐like shape, yet a corresponding compound has remained elusive. Here, we report a proof of this assumption by the synthesis of [K(crypt‐222)]2[Bi6{Zn(hmds)}2] ⋅ 1.5THF (1), comprising a bimetallic [Bi6{Zn(hmds)}2]2− cluster that fulfills the prediction for the geometric and electronic structure of the missing link (crypt‐222=4,7,13,16,21,24‐hexaoxa‐1,10‐diazabicyclo‐[8.8.8]hexa‐cosane, hmds=hexamethyldisilazanid). A detailed quantum chemical study shows how the nature of Lewis‐acidic transition metal complexes—in particular, 12‐electron fragments—control and fine‐tune the resulting {Bi6} architectures in accordance with the degree of electron‐withdrawal from the polybismuthide core.

Synthesis, spectroscopic characterization techniques of aromatic iminoaniline derived compound, along with the evaluation of its LNO properties using quantum chemistry

In this research work, we synthesized a Schiff base derivative, N,N-dimethyl-4-{[(4-nitrophenyl)imino]-methyl}aniline, denoted as (n1). The molecule (n1) was characterized using spectroscopic analyses, including FT-IR, NMR 1H, and 13C. Our compound (n1) is an unsaturated molecule, consisting of two benzylic rings connected by a methylimine bridge. The resulting system comprises seven alternating π bonds. At both ends of (n1) and in the para position, there are the N(CH3)2 group with a strong electron-donating effect and the NO2 group with a strong electron-accepting effect. The molecular structure of our compound prompted us to evaluate and study its properties in the field of NLO. The assessment of NLO properties is conducted by determining the Egap and employing density functional theory (DFT) quantum chemistry studies. The optical gap of (n1), measured using the Tauc method, is found to be 2.7 eV, serving as a reference value for the choice of the DFT functional in theoretical calculations. Quantum chemistry studies were carried out using Gaussian09 software, and the results were visualized with GaussView05. CAM-B3lyp functional was chosen for theoretical calculations due to its close agreement with experimental values. The studies confirm that (n1) exhibits significant NLO properties. Additionally, NBO (Natural Bond Orbital) analyses provide insight into the mechanism and trajectory of intramolecular charge transfer in (n1).

Zebrafish (Danio rerio) as a Model System to Investigate the Role of the Innate Immune Response in Human Infectious Diseases

The zebrafish (Danio rerio) has emerged as a valuable model for studying host-pathogen interactions due to its unique combination of characteristics. These include extensive sequence and functional conservation with the human genome, optical transparency in larvae that allows for high-resolution visualization of host cell-microbe interactions, a fully sequenced and annotated genome, advanced forward and reverse genetic tools, and suitability for chemical screening studies. Despite anatomical differences with humans, the zebrafish model has proven instrumental in investigating immune responses and human infectious diseases. Notably, zebrafish larvae rely exclusively on innate immune responses during the early stages of development, as the adaptive immune system becomes fully functional only after 4–6 weeks post-fertilization. This window provides a unique opportunity to isolate and examine infection and inflammation mechanisms driven by the innate immune response without the confounding effects of adaptive immunity. In this review, we highlight the strengths and limitations of using zebrafish as a powerful vertebrate model to study innate immune responses in infectious diseases. We will particularly focus on host-pathogen interactions in human infections caused by various bacteria (Clostridioides difficile, Staphylococcus aureus, and Pseudomonas aeruginosa), viruses (herpes simplex virus 1, SARS-CoV-2), and fungi (Aspergillus fumigatus and Candida albicans).

THE CHOICE OF COMPONENTS AND THE IMPACT OF SURFACTANTS AND CO-SURFACTANTS ON EPLERENONE NANOEMULSION SYNTHESIS FOR GEL-BASED TRANSDERMAL APPLICATION

Objective: This research aims to establish an efficient methodology for selecting nanoemulsion components to synthesize eplerenone nanoemulsion for gel-based transdermal applications. Methods: The chemical compatibility study of eplerenone was investigated by FTIR, DSC, and solubility in oils, surfactants, and co-surfactants as the criteria for choice. We used visual appraisal and grading to assess the effectiveness of emulsification. Various excipients were tested depending on solubility. The final appearance, dispersibility, and ease of emulsification were used to visually assess the degree of self-emulsification of oil and emulsifier in a 1:3 mass ratio. Co-surfactants were assessed by mixing particular emulsifiers in a 2:1 (w/w) ratio with co-surfactants, and the oily component was added at a 1:3 (w/w) ratio to evaluate Smix's emulsification potential. A central composite design synthesized, evaluated, and optimized eplerenone nanoemulsions. Optimized nanoemulsions were characterized after a thermodynamic stability study for droplet size, ζ potential, viscosity, refractive index, pH measurements, and TEM. All the selected formulations were found to be stable, and the droplet size was found to be<110 nm. Results: Eplerenone was chemically compatible, and its maximum solubility was 171.3±0.92 and 169.3±2.22 in Kollicream®OA and Paceol, respectively. The evidence impressively found that Tween 20 and Kolliphor®EL were discovered as active emulsifiers, and Transcutol®P was revealed to be a co-surfactant. Outcomes showed that the emulsification efficacy of Kolliphor®EL (3% w/w) was able to emulsify Kollicream®OA (1% w/w), and Paceol failed. As well, Smix [Kolliphor®EL (2% w/w) and Transcutol®P (1% w/w)] were able to emulsify Kollicream®OA (1% w/w). Conclusion: The main conclusion from this work is the application of a visual appraisal and grading system to assess the final appearance, dispersibility, and ease of emulsification to eradicate the toxicity and irritation that nanoemulsions can cause. Optimised nanoemulsions can further formulate eplerenone's nanoemulsion gel for transdermal application.

Evaluating the antidiabetes and antioxidant activities of halogenated Schiff bases derived from 4-(diethylamino)salicylaldehyde: in vitro antidiabetes, antioxidant and computational investigation

Six Schiff bases with general name 5-(diethylamino)-2-(((halophenyl)imino)methyl)phenol (where halo = 4-fluoro (H1), 2-fluoro (H2), 2-bromo (H3), 4-bromo (H4), 4-chloro (H5) and 3-chloro-4-fluoro (H6)) were prepared by the condensation reaction between 4-(diethylamino)salicylaldehyde and suitable halogenated aromatic amines. The six halogenated Schiff bases were elucidated using different spectroscopic techniques and the structure of H3 and H6 were confirmed using single-crystal X-ray crystallography. The bond lengths of C7–N1, C7–C8 and C8–C9 obtained from structural analysis for both compounds depicted their enol-tautomeric characteristic form. The Hirshfeld analysis revealed that H‧‧‧H intermolecular contacts contributed most towards the Hirshfeld surfaces of both H3 (47.6%) and H6 (39.9%). Quantum chemical calculation studies showed that H1 and H2 have the highest and lowest energy band gap (∆E = 3.80 eV for H1 and ∆E = 3.73 eV for H2), depicting H2 and H1 as the most and least chemically reactive respectively among all the compounds. α-Amylase and α-glucosidase assay were used to evaluate the antidiabetes prowess of the synthesized compounds. All the compounds exhibited lower IC50 values than acarbose (reference drug) in α-amylase assay experiments and H5 with lowest IC50 value of 63.54 μM could be suggested to have the highest α-amylase inhibitory potential among the test samples. For α-glucosidase assay, H1–H6 displayed good antidiabetic potential. However, none of the compounds outshined acarbose with H6 having highest α-glucosidase inhibitory potential when compared to others i.e., IC50 of H6 = 60.89 μM and IC50 of acarbose = 51.42 μM. We measured the antioxidant potential of H1–H6 exploring 2,2-diphenyl-1-picrylhydrazyl (DPPH), nitric oxide (NO) and ferric reducing ability power (FRAP) assays. The DPPH as well as NO radical scavenging assay showed that all the compounds exhibited excellent antioxidant results with some of the compounds surpassing catechin (reference drug). Compound H5 with IC50 values of 30.32 mM and 31.73 mM outshined catechin with IC50 values of 31.17 mM and 140.62 mM for DPPH and NO assays respectively. All the compounds fell within the threshold of Lipinski’s Ro5 projecting them as orally bioavailable and less toxic future therapeutics.

Theoretical Evaluation of Complex Dielectric Constant for Gamma Relaxation of Poly(methyl methacrylate), A Study of Quantum Chemistry and Linear Response Theory

Theoretical Evaluation of Complex Dielectric Constant for Gamma Relaxation of Poly(methyl methacrylate), A Study of Quantum Chemistry and Linear Response Theory

Synthesis and characterization of p-CuO/n-ZnO heterostructured composite thin films for the detection of formaldehyde gas.

We report the synthesis and characterization of pure CuO and CuO-ZnO nanostructured composite thin films sprayed on particle-free glass substrates using chemical spray pyrolysis method. The films were systematically analyzed through microstructural, morphological, chemical, and gas-sensing studies. X-ray diffraction (XRD) studies confirmed the polycrystalline nature of the films, with a predominant monoclinic phase along the (002) direction. Key structural parameters, such as crystallite size, dislocation density, strain, and the number of crystallites per unit area, were reported from XRD analysis. Field emission scanning electron microscopy (FESEM) revealed a bundled-like morphology with uniform particle distribution, enhancing the surface area for effective gas interaction. X-ray photoelectron spectroscopy (XPS) results indicated that Cu and Zn ions existed predominantly in the 2+ oxidation state, contributing to the films' reactivity. Significantly, the gas sensing studies were investigated with static liquid distribution method, highlighting the remarkable performance of the 30 wt.% CuO-ZnO composite thin film. This composite exhibited a substantial response to 5 ppm formaldehyde at ambient conditions, showing a recovery time of 22 seconds and a response time of 15 seconds. These findings underscore the potential of CuO-ZnO composites for efficient formaldehyde gas sensing applications, marking a notable advancement in the field of environmental monitoring.

Integration of interdisciplinary connections between chemistry, physics, and biology in the education of secondary school students

The incorporation of interdisciplinary connections is a key element of contemporary education and plays a crucial role in the development of secondary school students. The purpose of the study is to analyze the features of the introduction and influence of interdisciplinary education on the study of physics, chemistry, and biology in the secondary school. To achieve research goals, various works of authors were used, who studied the issues of interdisciplinary connections of natural sciences, as well as such methods: generalization, survey, and axiomatic. The results of the work determined that interdisciplinary education of schoolchildren in Kazakhstan plays an important role in the development of complex and critical thinking, as well as the ability to apply knowledge in various contexts. This approach to learning integrates physics, chemistry, and biology to help students see the connections between them and apply what they have learned to real situations. As a result of the analysis, it was found that the implementation of interdisciplinary connections had a positive effect on about 90% of schoolchildren who, within the framework of this educational paradigm, learned to develop integrative abilities, the ability to see the relationship between subjects, apply analytical and creative skills, and work in a team. Moreover, the study highlighted that interdisciplinary education fostered greater student motivation and enthusiasm for learning, as it provided a more comprehensive understanding of how their subjects could be applied in practice. However, the research also identified several challenges, with the most significant being the insufficient preparation and readiness of teachers to engage in collaborative and integrated teaching activities.

Ultrastrong coupling limit to quantum mean force Gibbs state for anharmonic environment.

The equilibrium state of a quantum system can deviate from the Gibbs state if the system-environment (SE) coupling is not weak. An analytical expression for this mean force Gibbs state (MFGS) is known in the ultrastrong coupling (USC) regime for the Caldeira-Leggett (CL) model that assumes a harmonic environment. Here, we derive analytical expressions for the MFGS in the USC regime for more general SEmodels. For all the generalized models considered here, we find the USC state to be diagonal in the basis set by the SEinteraction, just like in the CL case. While for the generic model considered, the corresponding USC-MFGS is found to alter from the CL result, we do identify a class of models more general than the CL model for which the CL-USC result remains unchanged. We also provide numerical verification for our results. These results provide key tools for the study of strong coupling quantum thermodynamics and several quantum chemistry and biology problems under more realistic SEmodels, going beyond the CL model.

A concise 40 T pulse magnet for condensed matter experiments

There is a growing interest in using pulsed high magnetic field as a controlling parameter of physical phenomena in various scientific disciplines, such as condensed matter physics, particle physics, plasma physics, chemistry, and biological studies. We devised a concise and portable pulsed magnetic field generator that produces a 40 T field with a pulse duration of 2 ms. It is assembled using only off-the-shelf components and a homemade coil that leverages small computers, Raspberry Pi, and Python codes. It allows for straightforward modification for general purposes. As working examples, we show representative applications in condensed matter experiments of magnetoresistance, magnetization, and magnetostriction measurements for graphite, NdNi2P2, and NdCo2P2, respectively, with the maximum magnetic field of 41 T and the lowest temperature of 4.2 K.

Harnessing Oxidizing Potential of Nickel for Sustainable Hydrocarbon Functionalization.

While the oxidative chemistry of transition metals such as iron and copper is a highly developed area of investigation, the study of similar chemistry with nickel is much younger. However, nickel offers rich coordination chemistry with oxygen and other oxidants and is a promising avenue of research for applications such as sustainable hydrocarbon functionalization. Herein, we summarize the progress made recently in nickel coordination chemistry relevant to hydrocarbon functionalization and offer our perspectives on open questions in the field.

Assessments and Investigation of Process Parameter Impacts on Surface Roughness, Microstructure, Tensile Strength, and Porosity of 3Dprinted Polyetherether Ketone (PEEK) Materials:

Additive manufacturing (AM) is emerging as a competitive technology with promising applications across various sectors, including biomedical, automotive, construction, and dental implants. This study investigates the influence of key process parameters on the surface roughness, microstructure, tensile strength, and porosity of Polyether Ether Ketone (PEEK), a high-performance thermoplastic used in dental prosthetics. Traditionally, metals and ceramics have been the standard for dental restorations, but advancements in computer-aided design (CAD) and computer-aided manufacturing (CAM) have improved accuracy, particularly for implant-supported prostheses. However, conventional methods like CAD-milling face challenges such as material waste and tool wear. AM techniques, such as fused deposition modeling (FDM), offer a solution by constructing objects layer by layer, minimizing waste. This research explores the effects of nozzle temperature on the mechanical properties of 3D-printed PEEK, emphasizing its role in optimizing performance and minimizing issues like porosity. Key factors like surface roughness and microstructure are highlighted as critical to the biocompatibility and longevity of dental restorations. The study identifies the optimal nozzle temperature range for PEEK 380-440°C, noting that deviations from this range lead to compromised mechanical properties. Overall, the findings provide valuable insights into optimizing the AM process for PEEK in dental applications and suggest that further biological and chemical studies are necessary to fully realize the material's potential in replacing traditional dental restoration materials.

Evidence for Abiotic Dimethyl Sulfide in Cometary Matter

Technological progress related to astronomical observatories such as the recently launched James Webb Space Telescope (JWST) allows searching for signs of life beyond our solar system, namely, in the form of unambiguous biosignature gases in exoplanetary atmospheres. The tentative assignment of a 1σ–2.4σ spectral feature observed with JWST in the atmosphere of exoplanet K2-18b to the biosignature gas dimethyl sulfide (DMS; sum formula C2H6S) raised hopes that, although controversial, a second genesis had been found. Terrestrial atmospheric DMS is exclusively stemming from marine biological activity, and no natural abiotic source has been identified—neither on Earth nor in space. Therefore, DMS is considered a robust biosignature. Since comets possess a pristine inventory of complex organic molecules of abiotic origin, we have searched high-resolution mass spectra collected at comet 67P/Churyumov–Gerasimenko, target of the European Space Agency’s Rosetta mission, for the signatures of DMS. Previous work reported the presence of a C2H6S signal when the comet was near its equinox, but distinction of DMS from its structural isomer ethanethiol remained elusive. Here we reassess these and evaluate additional data. Based on differences in the electron ionization-induced fragmentation pattern of the two isomers, we show that DMS is significantly better compatible with the observations. Deviations between expected and observed signal intensities for DMS are <1σ, while for ethanethiol they are 2σ–4σ. The local abundance of DMS relative to methanol deduced from these data is (0.13 ± 0.04)%. Our results provide the first evidence for the existence of an abiotic synthetic pathway to DMS in pristine cometary matter and hence motivate more detailed studies of the sulfur chemistry in such matter and its analogs. Future studies need to investigate whether or not the present inference of cometary DMS could provide an abiotic source of DMS in a planetary atmosphere.

Early Days in the Hunt Laboratory at UVA, 1969-1980

Arriving at the University of Virginia in the autumn of 1969, Donald Hunt began his 50+ year career in academics with the study of organometallic chemistry, on which he had done his PhD thesis, and mass spectrometry, to which he was introduced while a postdoc in Klaus Biemann’s laboratory at the Massachusetts Institute of Technology. In the 1970s, Hunt’s lab pioneered the use of negative chemical ionization (CI) to enhance sensitivity for studying organic molecules, developed a system for simultaneously obtaining positive and negative CI spectra to augment structure elucidation, and built a prototype triple quadrupole instrument so effective at collisional dissociation that its commercial counterpart became the analytical instrument of choice for mixture analysis for the next decade and beyond. Foreseeing that the future lay in the analysis of biological molecules, by the end of the decade Hunt shifted his focus to peptides. The analysis of protein fragments had suddenly become more accessible thanks to the advent of the triple quadrupole and Barber’s invention of fast atom bombardment. As the ‘80s began and Hunt and his team sought to pursue larger and larger pieces of proteins, his attention turned to the development of mass spectrometers with greater mass range. While recounting their memories of these events, several of Hunt’s students and colleagues pay tribute to his support for them as individuals, as well as to his infectious enthusiasm for scientific endeavors that he so generously shared.

Stability of antibiotics for use in the testing of immediate drug allergy reactions

BackgroundLimited information is available regarding the physicochemical stability of penicillins-based preparations for skin testing purposes and no information is currently available for other classes of antibiotics. ObjectiveTo perform chemical and physical stability studies on 16 parenteral antibiotics for skin testing purposes, with an overall aim to provide practical recommendations to clinicians on suitable components, storage, and optimal shelf-life of such preparations. MethodsChemical stability was assessed via validated stability-indicating high performance liquid chromatography with ultraviolet detection assays, while absence of precipitations or haziness, significant pH shift and colour change were used to determine physical stability. ResultsOther than amoxicillin/clavulanic acid, all of the parenteral antibiotics were found to have adequate physicochemical stability between 2 to 7 days. Amoxicillin in Water for Injection BP retained >90% stability, while amoxicillin/clavulanic acid dropped to <80%. Ampicillin remained >90% stable for 2 days, and benzylpenicillin, flucloxacillin, and piperacillin/tazobactam were stable for ≥2 days at ∼95%. Cephalosporins were stable for 2 days, except ceftazidime, which increased to >110%. Aztreonam, ciprofloxacin, and vancomycin retained >95% stability for 7 days, while meropenem was stable for 2 days. Sulfamethoxazole/trimethoprim lost 15% but stabilized at ∼85% for 7 days. No precipitation occurred, but amoxicillin/clavulanic acid changed colour by day 7. pH decreases of ≤1.0 unit were observed in penicillins, while cefepime dropped below acceptable pH limits by day 7. Absorbance shifts >100 units were seen in several antibiotics by day 7. ConclusionsThis study has generated practical stability information for clinicians, allowing 15 parenteral antibiotics from 7 different classes to be aseptically prepared in advance for use in the testing of drug allergy reactions.

Screening and evaluation of phase change absorbents by molecular polarity index: Experimental and quantum chemical calculation studies

Phase change absorbents have recently received increasing attention due to their potential to reduce the energy penalty of CO2 capture. However, its complex composition makes the prediction of phase separation performance difficult. Phase separation behavior and phase separation rate have been investigated for the amine-aqueous 5.0 M amine blends by experimental and quantum chemical calculations (including MPI, hydrogen bonds and Gibbs free energy). The different phase behaviors upon CO2 absorption were discussed and well explained by the polarity change of components and the reaction products. A defined MPI value of tertiary amines was recommended to predict the immiscible type (MPI > 10.55 Kcal/mol), phase separation type (9.00 Kcal/mol < MPI < 10.08 Kcal/mol), and miscible type (MPI < 6.74 Kcal/mol). The electron density at the critical point of hydrogen bonds and interaction region indicators were employed to visually evaluate the influence of intramolecular and intermolecular hydrogen bonds on phase separation behaviors. The results show that the presence of excessive hydrogen bonds decreased the phase separation capacity. Furthermore, the relationship between the MPI, the Gibbs free energy of the proton transfer process and the phase separation time were explored. The increase of MPI caused by the tertiary amines can enhance the stability of the final product, delay the appearance of the phase separation peak and reach a maximum phase separation time of 230 min. Therefore, this study is significant for the screening and evaluation of efficient phase change absorbents with good potential for industrial applications in CO2 capture.