Structural Parameters Research Articles

Research on the efficiency analysis method of 9AT transmission planetary gear system based on power loss

As the core element of power transmission in Automatic Transmission (AT), the planetary gear system has advantages in the gear ratio range, load carrying capacity and transmission efficiency, and its transmission efficiency analysis is an important link in the design of automatic transmission.This paper proposes a method to analyze the transmission efficiency of planetary gear system of 9AT transmission considering power losses. Firstly, based on the hypergraph theory to establish the power transmission roadmap of each gear of the transmission (9AT) and the triangular hypergraph of the four-row planetary gear system, as well as the power flow model of the four-row planetary gear system without considering the power losses, and then the rotational speed, torque, and power change of each gear of the gear system are analyzed through the power spectrum. Secondly, a power flow model considering power losses and circulating power was established to analyze the influence law of different operating parameters (speed, torque, viscosity, gear meshing friction coefficient), and structural parameters (characteristic coefficients of each planetary row) on the transmission efficiency of the system. Finally, the equivalent planetary gear system transmission efficiency experimental bench considering losses is established to measure the transmission efficiency of the two-row planetary gear system at different speeds and torques, and the results of the experimental tests have the same trend with the theoretical calculations, which provides an analytical method to improve the transmission efficiency of the planetary gear system of the 9AT transmission.

Fast inverse design of microwave and infrared Bi-stealth metamaterials based on equivalent circuit model

This work proposed a fast inverse design method for microwave and infrared (IR) bi-stealth metamaterials based on the equivalent circuit model (ECM). Using this method, we designed a microwave and IR bi-stealth metamaterial by deploying a multilayered structure of the indium tin oxide (ITO) film based metasurface. First, the IR emissivity of the ITO film was calculated in the framework of the ECM. Then, an ITO metasurface was proposed to implement low IR emission and high microwave transmission simultaneously. Based on the ECM of the square patch, the ECM of the whole metamaterial was established at the microwave band. An inverse design program was built by incorporating the ECM with genetic algorithm (GA). Structure parameters of the metamaterial were optimized by GA to achieve the broadest microwave stealth bandwidth for the given thickness. Finally, the sample of the optimized bi-stealth metamaterial was prepared and tested. The calculated, simulated, and measured results are in good agreement, showing that such a metamaterial has an IR emissivity of 0.18 in the band from 3 to 14 μm and an efficient microwave stealth band from 4.8 to 17 GHz with a thickness of 4.9 mm. The proposed method will benefit the design and application of microwave and IR bi-stealth metamaterials.

Surface Plasmon Resonance Allows to Correlate Molecular Properties with Diffusion Coefficients of Linear Chain Alcohols.

Every biological and physicochemical process occurring in a fluid phase depends on the diffusion coefficient (D) of the species in solution. In the present work, a model to describe and fit the behaviour of D as a function of structure and extensive thermodynamics parameters in binary solutions of linear chain organic molecules is developed. Supporting experimental and computational evidences for this model are obtained by measuring D for a series of n-alcohols through a novel surface plasmon resonance method and molecular dynamics simulations. This allows to propose a kind of combined analysis to explain the dependence of D on various thermodynamic and structural parameters. The results suggest that for small linear systems in the range from 0 to 200 g mol-1 and under the assumption that the diffusive activation energy is a linear function of mass, D is strictly dependent on the molecular shape and on the relative strength of the solute-solvent intermolecular forces represented by a parameter named R. The newly proposed approach can be utilized to characterize and monitor progressive changes in physicochemical properties for any investigated species upon increasing the dimension of the aggregate/molecule along a certain direction.

Fluid–acoustic–structure resonance mechanism of a plane cascade via a low-speed wind tunnel test

Acoustic resonance is an important factor that contributes to aeroengine compressor failure. In this study, a plane cascade of compressor blades was designed to reproduce acoustic resonance via a low-speed wind tunnel test. A high-frequency hot-wire, microphone and strain gauge were used to synchronously measure the fluid, acoustic and structural parameters. We analysed the variation in the amplitude and frequency of the multi-field parameters with increasing mean flow velocity and explored the multi-field interaction mechanism that induces the acoustic resonance of the plane cascade. The plane cascade effectively reproduced the acoustic resonance phenomenon. The first-order acoustic-mode frequency of the plane cascade flow duct, second-order torsional vibration mode frequency of the blade and shedding mode frequency of the tip clearance leakage vortex were equal under acoustic resonance. The fluid, acoustic and structural fields showed a strong interaction effect, achieving the maximum blade vibration amplitude and causing fatigue cracks of torsional vibration at the blade root. The frequency lock-in region of the compressor plane cascade was divided into an ‘acoustic–structure’ interaction region, a ‘fluid–acoustic–structure’ interaction region and a first-order acoustic-mode dominant region with increasing mean flow velocity, which demonstrates an interesting phenomenon in which the fluid–acoustic–structure modes compete: acoustic mode > blade vibration mode > vortex shedding mode. The results demonstrate a unique approach to the study of acoustic resonance that provides insight into the acoustic resonance mechanism in a cascade of compressor blades.

Study on the Vibration Reduction Effect of Piezoelectric Actuation on Flexible Tilting Pad Bearings with Different Structural Parameters

To improve the vibration performance of oil-lubricated tilting pad bearing systems, this paper investigates the impact of different structural parameters on the vibration reduction effect of piezoelectric actuators on flexible tilting pad bearings. Four sets of flexible tilting pad bearings were designed and manufactured, including a flexible hinge tilting pad bearing and three sets of double-layer spring-supported flexible tilting pad bearings with different parameters. The radial displacement of the bearing load pad was controlled to varying degrees using a piezoelectric actuator, and semi-active control experiments were conducted on the flexible tilting pad bearings. The experimental results show that appropriately reducing the radial clearance and the stiffness of the bearing’s flexible structure can effectively suppress vibrations, enhance the vibration reduction effect of the piezoelectric actuation, and increase the stability of the bearing-rotor system. This study is of significant importance for the design of flexible tilting pad bearings and the vibration suppression of rotor systems.

Stands diversity and population structure of five ethnoveterinary woody species according to climatic zone and human disturbance in Benin (West Africa)

Farmers continue to use medicinal plants, alone or in combination with veterinary medicines, to treat animal diseases, especially in developing countries. The study aimed to determine the effect of climatic zone and anthropic disturbance level on the diversity of the natural stand and structures of Morinda lucida Benth, Spondias mombin L., Terminalia leiocarpa (DC.) Baill, Crossopteryx febrifuga (Afzel. ex G. Don) Benth, and Vitex doniana Sweet, five plant species often used in ethnoveterinary medicine in Benin. A floristic inventory was conducted in 206 plots of 0.15 ha each, distributed across 6 forests/hunting areas as well as surrounding fields and fallow land. The data were analyzed using R software by calculating the importance value index and the population structural parameters (density, basal area, mean height, etc.). The results showed that the floristic composition of the habitats of the five target species varied by climatic zone and disturbance level. Morinda lucida, S. mombin, and V. doniana were available in stands undergoing heavy disturbance in the Guinean zone, whereas T. leiocarpa and C. febrifuga were more available in the Sudano-Guinean and Sudanian zones. Values of structural parameters of these species were higher in the Guinean zone than in the other two zones. Furthermore, the results of the diameter structure showed C-values ranging from 1 to 3.6, suggesting the predominance of young individuals. This suggests strong human pressure on the adults of studied plants. These results should be used to contribute to the sustainable use of these species. Recommendations are made for the sustainable use of these five species, especially T. leiocarpa and C. febrifuga, which were heavily exploited given their low availability in stands under high human disturbance.

Forest Canopy Height Estimation Combining Dual-Polarization PolSAR and Spaceborne LiDAR Data

Forest canopy height data are fundamental parameters of forest structure and are critical for understanding terrestrial carbon stock, global carbon cycle dynamics and forest productivity. To address the limitations of retrieving forest canopy height using conventional PolInSAR-based methods, we proposed a method to estimate forest height by combining single-temporal polarimetric synthetic aperture radar (PolSAR) images with sparse spaceborne LiDAR (forest height) measurements. The core idea of our method is that volume scattering energy variations which are linked to forest canopy height occur during radar acquisition. Specifically, our methodology begins by employing a semi-empirical inversion model directly derived from the random volume over ground (RVoG) formulation to establish the relationship between forest canopy height, volume scattering energy and wave extinction. Subsequently, PolSAR decomposition techniques are used to extract canopy volume scattering energy. Additionally, machine learning is employed to generate a spatially continuous extinction coefficient product, utilizing sparse LiDAR samples for assistance. Finally, with the derived inversion model and the resulting model parameters (i.e., volume scattering power and extinction coefficient), forest canopy height can be estimated. The performance of the proposed forest height inversion method is illustrated with L-band NASA/JPL UAVSAR from AfriSAR data conducted over the Gabon Lope National Park and airborne LiDAR data. Compared to high-accuracy airborne LiDAR data, the obtained forest canopy height from the proposed approach exhibited higher accuracy (R2 = 0.92, RMSE = 6.09 m). The results demonstrate the potential and merit of the synergistic combination of PolSAR (volume scattering power) and sparse LiDAR (forest height) measurements for forest height estimation. Additionally, our approach achieves good performance in forest height estimation, with accuracy comparable to that of the multi-baseline PolInSAR-based inversion method (RMSE = 5.80 m), surpassing traditional PolSAR-based methods with an accuracy of 10.86 m. Given the simplicity and efficiency of the proposed method, it has the potential for large-scale forest height estimation applications when only single-temporal dual-polarization acquisitions are available.

Optimizing tacrolimus dosing in Hispanic renal transplant patients: insights from real-world data

AimTacrolimus, an immunosuppressant used to prevent organ rejection in renal transplant patients, exhibits high inter-patient variability, necessitating therapeutic drug monitoring. Early post-transplant tacrolimus exposure in Hispanics is understudied. Although genotypic information is linked to pharmacokinetic differences, its clinical application remains limited. This study aimed to use a real-world data-driven, pharmacokinetic model-based approach for tacrolimus in Hispanics to determine a suitable initial dose and design an optimal dose titration strategy by simulations to achieve plasma trough concentration target levels of 10–12 ng/mL at the earliest.MethodsSparse concentration-time data of tacrolimus were obtained from electronic medical records for self-identified Hispanic subjects following renal transplant. Rich pharmacokinetic literature data was leveraged to estimate structural pharmacokinetic model parameters, which were then fixed in the current analysis. Only apparent clearance was estimated with the sparse tacrolimus data and potential covariates were identified. Simulations of various starting doses and different dose titration strategies were then evaluated.ResultsThe analysis included 121 renal transplant patients with 2,215 trough tacrolimus concentrations. A two-compartment transit absorption model with allometrically scaled body weight and time-varying hematocrit on apparent clearance adequately described the data. The estimated apparent clearance was 13.7 L/h for a typical patient weighing 70 kg and at 30% hematocrit, demonstrating a 40% decrease in clearance compared to other patient populations. Model based simulations indicated the best initial dose for the Hispanic population is 0.1 mg/kg/day. The proposed titration strategy, with three dose adjustments based on trough levels of tacrolimus, increased the proportion of patients within the target range (10–12 ng/mL) more than 2.5-fold and decreased the proportion of patients outside the therapeutic window by 50% after the first week of treatment.ConclusionHispanic renal transplant population showed an estimated 40% decrease of apparent clearance in the typical patient compared to other populations with similar characteristics. The proposed dose adjustment attained the target range rapidly and safely. This study advocates for tailored tacrolimus dosing regimens based on population pharmacokinetics to optimize therapy in Hispanic renal transplant recipients.

Synthesis, DFT investigation, antioxidant, molecular docking and ADME-T properties of N′-(1-benzylpiperidin-4-ylidene) furan-2-carbohydrazide derivatives against SARS-CoV-2 spike proteins

ABSTRACT A novel synthetic reaction was used to produce a piperidine derivative, specifically N′-(1-benzylpiperidin-4-ylidene)furan-2-carbohydrazide (BPFC). The structure of the synthesised compound was confirmed through FT-IR, 1H-NMR and 13C-NMR spectral analysis. DFT calculations were performed to optimise structural parameters and investigate Natural Bond Orbital (NBO) analysis, Frontier Molecular Orbitals (FMOs), Molecular Electrostatic Potentials, Mulliken Charge Analysis, and Non-linear Optical properties. The predicted chemical shift values align well with the expected results. The antioxidant properties of the newly synthesised compound were assessed using DPPH, ABTS, and H2O2 radical scavenging assays. Molecular docking studies were also carried out to explore the binding mechanism of the compound with COVID-19-related proteins, particularly 6WCF and 6LU7. Additionally, the synthesised compound was assessed for drug-likeness and ADMET (Absorption, Distribution, Metabolism, Excretion, and Toxicity) properties, revealing favourable pharmacokinetic profiles without any signs of toxicity.

Comparative study of structural, opto-electronic properties of Cs2TiX6-based single halide double perovskite solar cells: computational and experimental approach

This research work represents a comparative study of the structural, optical, and electronic properties of Cs2TiX6 single halide perovskite solar cell (PSC). The entire work has been carried out by experimental work under ambient conditions and followed by the DFT method. Absorbing material structural parameters (lattice constant, shape), and band gap energy can be easily estimated from the DFT approach which can be compared with the result of experimental work. Our study shows Cs2TiBr6 PSC has better band gap energy of 1.80 eV (numerically) and 1.82 eV (experimentally), open circuit voltage 0.58 V, short circuit current 2.55 mA cm−2 for the photovoltaic application. Also, the higher Zeta potential value of Cs2TiBr6 PSC indicates that it has better material stability and is less volatile compared to Cs2TiI6, Cs2TiCl6, and Cs2TiF6 PSCs. TEM images and the SAED pattern of the active layers show a higher degree of crystallite nature of the PSCs.On the other look, investigated PSC materials Cs2TiBr6, Cs2TiI6, Cs2TiCl6, and Cs2TiF6 have shown visible light emission edges at 358 nm, 375 nm, 363 nm, 735 nm wavelength, and the optical performance area of the Cs2TiBr6, Cs2TiI6, Cs2TiCl6, Cs2TiF6 samples is recorded up to 700 nm, 760 nm, 540 nm, and 660 nm wavelength, respectively.

Experimental Investigation of the Influence of Structural Parameters on the Radiative Transmittance of Goose-Down Polyester Nonwovens for Cold Weather Clothing

Experimental Investigation of the Influence of Structural Parameters on the Radiative Transmittance of Goose-Down Polyester Nonwovens for Cold Weather Clothing

Design and investigation of indium tin oxide-based transparent broadband microwave absorbers

Abstract This paper presents the design of a novel wideband transparent microwave absorber based on indium tin oxide (ITO). The absorber adopts a multilayer structure, with the top layer composed of a nested square structure made of ITO material, an intermediate dielectric layer of polyvinyl chloride (PVC), and a bottom layer of polyethylene terephthalate (PET) coated with ITO as the reflector. By optimizing structural parameters such as the thickness of the ITO film and the dimensions of the spacer layer, efficient broadband microwave absorption exceeding 90% is achieved within the frequency range of 2.43 to 5.67 GHz, while simultaneously meeting requirements for optical transparency and broadband performance. Simulation experiments and theoretical analyses demonstrate excellent polarization and incident angle stability of the absorber structure. Finally, samples are fabricated using screen printing technology, and free-space testing results are consistent with simulation predictions, validating the feasibility of the design.

A Vision and Proof of Concept for New Approach to Monitoring for Safer Future Smart Transportation Systems

Transportation infrastructure experiences distress due to aging, overuse, and climate changes. To reduce maintenance costs and labor, researchers have developed various structural health monitoring systems. However, the existing systems are designed for short-term monitoring and do not quantify structural parameters. A long-term monitoring system that quantifies structural parameters is needed to improve the quality of monitoring. In this work, a novel Transportation Rf-bAsed Monitoring (TRAM) system is proposed. TRAM is a multi-parameter monitoring system that relies on embeddable backscatter-based, batteryless, and radio-frequency sensors. The system can monitor structural parameters with 3D spatial and temporal information. Laboratory experiments were conducted on a 1D scale to evaluate and examine the sensitivity and reliability of the monitored structural parameters, which are displacement and water content. In contrast to other existing methods, TRAM correlates phase change to the change in concerned parameters, enabling long-term monitoring.

Experimental analysis of a beam with a 2D triangular substructure

AbstractThe aim of this study is to determine experimentally the higher material parameter of a metamaterial with a triangular substructure and to verify a higher‐gradient elasticity model for beams with internal substructures or microstructures. The investigations of the higher‐gradient elasticity models of Bernoulli‐Euler and Timoshenko beams with a periodic triangular substructure in Khakalo et al. show that the bending stiffness strongly depends on the geometrical parameters of the lattice structure. To achieve this goal, beams with triangular substructures were additively manufactured using fused deposition modeling and stereolithography. They were experimentally investigated in tensile and bending tests. Three different types of beams with triangular substructures were produced, consisting of one, two and four layers of triangular beams, using two different materials: Polylactide and epoxy resin. The higher material parameter g was quantitatively determined based on the experimental results using inverse analysis. The results are valid for these specific variations of the substructure and can adequately represent the elastic size effects. In addition, this study investigates the relationship between the bending stiffness and the geometric parameters of the lattice structure as well as the influence of the curing time on the elastic properties of epoxy resin. The experiments involved testing the triangular beams under tensile and bending loads. The numerical and experimental results were compared using digital image correlation. Based on the experimental data, a higher gradient material parameter representing the geometric structure of the lattice was determined.

Features of itinerant magnetism in Fe0.6Al0.4 film with B2-like short-range order

Abstract The complex relationship between spontaneous magnetization (M s) and structural parameters in Fe–Al systems should be attributed to the B2-like short-range order (SRO) and itinerancy-induced sensitivity of magnetism in B2 FeAl. We focused on the role of SRO in the magnetism of Fe0.6Al0.4 film with the B2-like SRO. The high-field susceptibility (χ HF) was observed through magnetometry, X-ray magnetic circular dichroism, and magneto-optical Kerr effect measurement, through which different χ HF values were obtained. The M s–T curves deviated from the Brillouin function, and it can be interpreted following the spin-wave theory with a low spin-wave stiffness of 0.75 meV nm2. Based on the observed χ HF and M s trends, the magnetic moment in the B2-like SRO was found to be induced by the exchange field from the surrounding ferromagnetic region. The coexistence of weak and strong ferromagnetic regions can be a possible reason for the complex magnetism in the Fe–Al system.

Complex nonlinear dynamics of a multidirectional energy harvester with hybrid transduction

Abstract Mechanical energy harvesting has increasing scientific and technological interests due to novel energetic challenges. A critical issue in classical cantilever-based mechanical energy harvesting systems is the lack of multidirectional energy conversion capabilities and, due to that, deviations from the excitation source can drastically reduce their performance. This limitation has led to the development of energy harvesters with attached pendula, serving as a direction coupling mechanism. Nevertheless, the pendulum structure itself can act as an energy absorber, drastically reducing the harvester performance in certain scenarios. In order to overcome this issue, a hybrid transduction multidirectional pendulum-based energy harvester is proposed integrating a piezoelectric element, to capture energy from the principal direction, and an electromagnetic transducer, to harness rotational energy from the pendulum. This paper presents an in-depth analysis of the hybrid multidirectional pendulum-based energy harvester using a nonlinear dynamics perspective to evaluate the energy harvesting performance. A reduced-order model is proposed to represent the essential characteristics of such systems. A parametric analysis using a nonlinear dynamics perspective is carried out to map the system dynamics and performance. The emergence of complex and rich dynamics is observed, including chaos and hyperchaos. Results reveal the most and least effective combinations of structural parameters in terms of energy conversion. Additionally, the dynamical responses and patterns associated with high performance are identified. These responses are often characterized by a blend of irregular complex behaviors, coupled with a mix of oscillatory and rotational patterns of motion, resulting in wider bandwidth systems.

Dual-channel photonic crystal fiber dual-parameter sensor exploiting surface plasmon resonance

A surface plasmon resonance (SPR) based sensor using a negative curvature circular side-polished photonic crystal fiber was proposed. The sensor’s sensitivity was analyzed using the finite element method. The impact of structural parameters was investigated. The sensor exhibits an average wavelength sensitivity (WS) of 7846 nm/RIU in the refractive index range of 1.370–1.396 and 2350 nm/RIU in the range of 1.330–1.370, with maximum WS of 46000 nm/RIU. For refractive index and magnetic field dual-parameter sensing, the simultaneously obtained magnetic field sensitivity is 0.84 nm/mT. The proposed SPR sensor demonstrates remarkable sensitivity, making it suitable for refractive index and magnetic field sensing applications.

Methods for the Viscous Loss Calculation and Thermal Analysis of Oil-Filled Motors: A Review

Oil-filled motors (OFMs) are widely used in deep-sea exploration and oil well extraction. During motor operation, the rotor stirs the oil in the air gap, causing viscous loss. Viscous loss affects the temperature distribution inside the motor. Accurately calculating the viscous loss and temperature rise in OFMs can provide a basis for optimizing the motor’s structural design. Motor structural parameters, including the rotor’s outer diameter, air gap, and slot opening, have a significant impact on viscous loss. The working conditions of OFMs, such as rotor speed and environmental temperature, also affect viscous loss. The viscosity of hydraulic oil is highly influenced by temperature, and changes in viscosity can lead to changes in viscous loss. These changes in viscous loss, in turn, alter the temperature distribution. Therefore, the coupling relationship between viscous loss and temperature must be considered. Additionally, when Taylor vortices occur in the fluid, the surface roughness of the rotor also has a significant influence on viscous loss. Currently, both domestic and international research on viscous loss and thermal analysis struggle to simultaneously consider the coupling of viscous loss and the temperature field, rotor surface roughness, and the effect of motor structure. This paper summarizes the methods used in recent years for studying viscous loss and thermal analysis, and puts forward some suggestions for future research on the coupling of the OFM temperature field and viscous loss.

Semicarbazone, thiosemicarbazone tailed isoxazoline-pyrazole: synthesis, DFT, biological and computational assessment.

Aim: A series of semicarbazone and thiosemicarbazone-tailed hybrids comprising pyrazole and acetylisoxazoline were prepared from (R)-carvone and characterized by technique spectroscopies Nuclear Magnetic Resonance (NMR), IR and High-Resolution Mass Spectrometry. Density Functional Theory (DFT)determined the structural parameters. Their cytotoxic activity was evaluated in vitro against four human cancer cell lines.Methods & results: All the studied semi and thiosemicarbazone demonstrate a promising potential as anticancer agents. The mechanism of action of these compounds involves apoptosis in HT-1080 cells, supported by an increase in the level of caspase-3/7 activity, which also arrests the cell cycle in the G0/G1 phase. Molecular docking studies were performed to establish the potential of the most active compounds 4a and 5a. ADMET analysis showed appropriate pharmacokinetic properties, allowing structure prediction for anticancer activity.

Preparation, Characterization, In Vitro Biological Evaluation, DFT Calculations, and Molecular Docking Investigations of 1H-Imidazole-2-Carboxylic acid and Histidine-Based Mixed-Ligand Complexes.

Mixed-ligand complexes incorporating 1H-Imidazole-2-Carboxylic acid (IMCA) and Histidine (LHIS) show promise for biomedical and biotechnological applications. This study synthesizes and characterizes FeIMCALHIS, CoIMCALHIS, and NiIMCALHIS coordination compounds using metal chloride salts (FeCl3.6H2O, CoCl2.6H2O, NiCl2.6H2O) in ethanolic solutions. The complexes are characterized by spectroscopic methods (IR, UV-vis, and mass spectra), elemental analysis, conductivity, magnetic, and thermal analysis. Molar conductivity indicates their non-electrolytic nature. UV-vis spectra reveal absorption bands with pathochromic shifts, and electronic spectra show characteristic metal-ligand transitions, indicating their structural configuration and coordination geometry. 3D geometry optimization shows six-coordination around Fe(III) and Co(II) in FeIMCALHIS and CoIMCALHIS, and four-coordination around Ni(II) in NiIMCALHIS. Analysis of the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) suggests decreased electron donation ability upon coordination. Electronic structure parameters (HOMO, LUMO, ionization potential, energy gap, electron affinity, chemical potentials, and electronegativity) provide further insights into stability and reactivity. The metal complexes exhibit enhanced antimicrobial, antioxidant, and anti-inflammatory activity compared to individual ligands, with FeIMCALHIS showing notable antimicrobial activity. Molecular docking analysis reveals strong binding interactions with target proteins, highlighting their potential therapeutic applications.