Strong Hydrogen Bonds Research Articles

Anethole Regulated Crystallization for High Efficiency Carbon‐Based Perovskite Solar Cells

AbstractTwo‐step sequential deposition is a widespread technique for the fabrication of perovskite films, renowned for its better control of the crystallization process. However, achieving a well‐controlled and complete reaction of PbI2 by organic ammonium salts remains a key challenge. Previous studies have predominantly focused on regulating the properties of the PbI2 layer while paying less attention to the high reactivity of organic ammonium salts. In this study, the natural molecule anethole is first explored to control perovskite crystallization during two‐step sequential deposition, focusing on the reactivity modulation of organic formamidine ion (FA+). It is demonstrated that FA+ exhibits strong hydrogen bond interactions with anethole, inhibiting the high reactivity of FA+ and effectively delaying the rapid reaction between FAI and PbI2. This decelerates the crystallization kinetics of perovskite films, facilitating the orderly and complete reaction of PbI2 by FAI while suppressing detrimental δ‐phase formation. Consequently, FA‐based perovskite films with high crystallinity, preferred orientation, and low defect state density are obtained. The fabricated planar hole transport layer‐free carbon electrode perovskite solar cells deliver an efficiency of 20.41% (certified efficiency of 20.0%), which is a new record for this kind of solar cell.

Effects of Ellagic Acid Supplementation on Antioxidant Status and Symptom Improvement in Patients with Major Depressive Disorder: A Double-blind Randomized Clinical Trial

Background: Depression is one of the most common mood disorders and a major public health concern. Ellagic acid (EA), a type of polyphenol, acts as a strong hydrogen bond network as an electron receptor, enabling it to participate in various reactions. Objectives: Major depression is a critical medical condition that has emerged as a public health issue due to its high incidence, mortality, and suicide rates. One significant factor in the pathogenesis of depression is oxidative stress. This study aimed to evaluate the effects of ellagic acid supplementation on antioxidant status and symptom improvement in patients with major depressive disorder, considering the antioxidant capabilities of ellagic acid. Methods: A total of 40 patients diagnosed with major depressive disorder based on DSM-V criteria were assessed using the Beck Depression and Hamilton Depression Questionnaires. The dietary and caloric intake of the patients were monitored. Additionally, height and weight were measured, and patients with similar age, gender, and weight were matched. The individuals were randomly assigned to either the intervention group or the placebo group using a randomization table. The intervention group received a daily dose of 200 mg of ellagic acid in capsule form. The placebo group received a daily dose of one capsule containing 200 mg of wheat flour, identical in appearance to the intervention substance. The study period lasted for 8 weeks. Venous blood samples were collected before and after the study from all 40 individuals, and after serum separation, oxidative stress markers (malondialdehyde and total antioxidant capacity). were measured using a specific kit and ELISA method. Results: The study results showed a significant reduction in depression scores in the ellagic acid group during the study (P: 0.001)., with these alterations being significant when compared to the placebo group. In the ellagic acid group, a significant increase in total antioxidant capacity (P: 0.027). and a significant decrease in malondialdehyde levels (P: 0.014). were observed at the end of the study, and these changes were significant compared to the placebo group. In contrast, significant changes in total antioxidant capacity and malondialdehyde levels were not observed in the placebo group. Conclusions: The current study indicates that ellagic acid intervention may have a favorable effect on depression in patients with major depressive disorder. This is achieved by reducing BDI scores and serum levels of MDA, as well as increasing serum levels of TAC in these patients compared to the placebo group. However, further investigation is necessary to explore the mechanisms underlying the different alterations of ellagic acid in depression.

A pH-sensitive film based on chitosan/gelatin and anthocyanin from Zingiber striolatum Diels for monitoring fish freshness

As a new type of packaging method, the anthocyanin-based pH-sensitive indicator film has gained much attention owing to low cost, small size, and visually informative property. In this study, an intelligent film based on chitosan/gelatin (CG) matrix with Zingiber striolatum Diels (ZSD) anthocyanin for fish freshness monitoring was developed. The film properties, including thickness, moisture content, color, mechanical properties, UV–vis light barrier property, as well as pH and ammonia sensitivity, were evaluated. The CG-ZSD films exhibited a more compact structure when compared with the CG film. The CG-ZSD20 film showed the highest elongation at break (6.33 ± 0.62%) and lowest tensile strength (20.0 ± 0.58 MPa). FTIR spectra revealed the strong hydrogen bond interactions between ZSD and polymer matrix. Film incorporated with 15% anthocyanin extract has increased melting temperature at 118.9 °C, and a lower weight loss (13.8%) at melting temperature. In pH 1–14 buffer, the color of CG-ZSD films underwent a significant change from red to yellow-green. The CG-ZSD15 film was utilized for monitoring fish freshness and showed visible color changes from deep purple to brown. The total volatile basic nitrogen content and pH value changes of fish were closely related to the visual color changes in film. This demonstrated that the film was a highly pH-sensitive film for quantifying fish freshness in real-time.

Superfast, large-scale harvesting of cellulose molecules via ethanol pre-swelling engineering of natural fibers

Cellulose molecules, as the basic unit of biomass cellulose, have demonstrated advancements in versatile engineering and modification of cellulose toward sustainable and promising materials in our low-carbon society. However, harvesting high-quality cellulose molecules from natural cellulosic fibers (CF) remains challenging due to strong hydrogen bonds and unique crystalline structure, which limit solvents (such as ionic liquid, IL) transport and diffusion within CF, making the process energy/time-intensively. Herein, we superfast and sustainably engineer biomass fibers into high-performance cellulose molecules via ethanol pre-swelling of CF followed by IL treatment in the microwave (MW) system. Ethanol-pre-swelled cellulosic fibers (SCF) feature modified morphological and structural distinctions, with improved fiber width, pore size, and specific surface area. The ethanol in the SCF structure is appropriately removed through MW heating and cooling, leaving transport and diffusion pathways of IL within the SCF. Such strategy enables the superfast (140 s) and large-scale (kilogram level) harvesting of cellulose molecules with high molecular weight, resulting in high-performance, versatile cellulose ionogel with a 300 % increase in strength and 1027 % in toughness, monitoring human movement, external pressure, and temperature. Our strategy paves the way for time/energy-effectively, sustainably harvesting high-quality polymer molecules from natural sources beyond cellulose toward versatile and advanced materials.

Highly Adsorptive Organic Xerogels for Efficient Removal of Metformin from Aqueous Solutions: Experimental and Theoretical Approach

Metformin, widely prescribed to treat type 2 diabetes for its effectiveness and low cost, has raised concerns about its presence in aqueous effluents and its potential environmental and public health impacts. To address this issue, xerogels were synthesized from resorcinol and formaldehyde, with molar ratios ranging from 0.05 to 0.40. These xerogels were thoroughly characterized using FT-IR, SEM, TGA, and TEM analyses. Batch adsorption experiments were performed with standard metformin solutions at concentrations of 50 and 500 mg/L, varying pH, and temperature to determine the adsorption isotherms of the synthesized xerogels. The adsorption data revealed a maximum adsorption capacity of 325 mg/g at pH 11 and 25 °C. Quantum chemical calculations revealed that electrostatic interactions govern metformin adsorption onto xerogels. The xerogels’ adsorption capacity was evaluated in competitive systems with CaCl2, NaCl, MgCl2, and synthetic urines. Reuse cycles demonstrated that xerogels could be reused for up to three cycles without any loss in adsorptive efficiency. The adsorption mechanisms of metformin in the adsorption process highlight the strong electrostatic interactions and hydrogen bonds between the adsorbate and the adsorbent material. Xerogels synthesized show promise as efficient adsorbents to remove metformin from aqueous solutions, helping to mitigate its environmental impact.

Unexpected Self-Assembly of Nanographene Oxide Membranes upon Electron Beam Irradiation for Ultrafast Ion Sieving.

Nanographene oxide (nGO) flakes-graphene oxide with a lateral size of ≈100nm or less-hold great promise for superior flux and energy-efficient nanofiltration membranes for desalination and precise ionic sieving owing to their unique high-density water channels with less tortuousness. However, their potential usage is currently limited by several challenges, including the tricky self-assembly of nano-sized flakes on substrates with micron-sized pores, severe swelling in aqueous solutions, and mechanical instability. Herein, the successful fabrication of a robust membrane stacked with nGO flakes on a substrate with a pore size of 0.22µm by vacuum filtration is reported. This membrane achieved an unprecedented water permeance above 819.1 LMH bar-1, with a high rejection rate of 99.7% for multivalent metal ions. The nGO flakes prepared using an electron beam irradiation method, have uniquely pure hydroxyl groups and abundant aromatic regions. The calculations revealed the strong hydrogen bonds between two nGO flakes, which arise from hydroxyl groups, coupled with hydrophobic aromatic regions, greatly enhance the stability of stacked flakes in aqueous solutions and increase their effective lateral size. The research presents a simple yet effective approach toward the fabrication of advanced 2D nanographene membranes with superior performance for ion sieving applications.

Mechanisms of interface electrostatic potential induced asphalt-aggregate adhesion

The electrostatic potential at the interface of the asphalt molecular and aggregate oxides is the primary factor generating the adhesion between the asphalt-aggregate contact surfaces. However, the route of electrostatic potential affecting the asphalt-aggregate adhesion is yet to be determined at the molecular level. This study proposed that the electron accumulation at the interface of the asphalt molecular and aggregate oxides generates a significant electrostatic potential hence to induce the adhesion between the asphalt and aggregate in asphalt pavement. A microscopic molecular dynamics (MD) simulation incorporated with macroscopic adhesion work experiments is conducted to analyze the interface adhesive performance between the asphalt and aggregate. The adhesion work experiment demonstrated the effect of aggregate surface oxides on asphalt adhesion at the macro level and further verified the simulation results. The result demonstrated that a notable electron accumulation can be observed by MD at the interface of asphalt molecular and multiple oxides which generates the electrostatic potential. The strong electrostatic attractions and hydrogen bonds between alkaline oxides (MgO, CaO, CaCO3) and asphalt molecules enhance the relative concentration distribution, diffusion coefficient, and adhesion of asphalt on the aggregate surface. The significant electrostatic potential difference at the interface of the asphalt molecular and the oxide enables a strong adhesion between them due to the near-surface failure potential. Besides, the negative charge accumulation on both the benzene ring structure and oxygen atoms in the asphalt molecules results in poor adhesion at the interface of asphalt molecules and multiple oxides. It was found that a high correlation exists between the MD prediction and experimental testing results. Thus, this research provides a valuable tool for guiding the pairing and selection of asphalt with various minerals for pavement design, construction, and maintenance agencies.

The lipase inhibitory effect of mulberry leaf phenolic glycosides: The structure-activity relationship and mechanism of action

The present study found for the first time that phenolic glycosides were an important material basis for mulberry leaves to inhibit lipase. The corresponding IC50 for hyperoside, rutin, astragalin and quercetin were 68, 252, 385 and 815 μg/mL respectively. The inhibitory effect was ranked as monoglycosides > phenolic hydroxyl groups > disaccharides on the benzone ring. Hyperoside bound to lipase in competitive inhibition type with one binding site, while the others bound to lipase in a mixed inhibition type by two similar sites. All four compounds altered the microenvironment and secondary conformation of lipase through static quenching. The docking score, stability, and binding energy were consistent with the compound inhibitory activity. The main binding between compounds and lipase amino acid residues were spontaneously though hydrophobic interactions and hydrogen bonding. The strong hydrogen bonds formed with SER-152 inside the lipase pocket, might be important for the strong inhibitory activity of hyperoside.

Unveiling the Mechanism of Phenamacril Resistance in F. graminearum: Computational and Experimental Insights into the C423A Mutation in FgMyoI.

Phenamacril (PHA) is a highly selective fungicide for controlling fusarium head blight (FHB) mainly caused by F. graminearum and F. asiaticum. However, the C423A mutation in myosin I of F. graminearum (FgMyoI) leads to natural resistance to PHA. Here, based on the computational approaches and biochemical validation, we elucidate the atomic-level mechanism behind the natural resistance of F. graminearum to the fungicide PHA due to the C423A mutation in FgMyoI. The mutation leads to a rearrangement of pocket residues, resulting in increased size and flexibility of the binding pocket, which impairs the stable binding of PHA. MST experiments confirm that the mutant protein FgMyoIC423A exhibits significantly reduced affinity for PHA compared to wild-type FgMyoI and the nonresistant C423K mutant. This decreased binding affinity likely underlies the development of PHA resistance in F. graminearum. Conversely, the nonresistant C423K mutant retains sensitivity to PHA due to the introduction of a strong hydrogen bond donor, which facilitates stable binding of PHA in the pocket. These findings shed light on the molecular basis of PHA resistance and provide new directions for the creation of new myosin inhibitors.

Enhancing the solubility of carbamazepine using ionic liquids: An experiment and theoretical calculation

This work investigates the solubility and dissolution mechanism of the insoluble drug, carbamazepine (CBZ), classified as class II drug in the Biopharmaceutical Classification System, in environmentally friendly solvent ionic liquids (ILs). The COSMO-RS model is used to identify suitable ILs for solubilizing CBZ. Experimental data of six ILs confirms the accuracy of the model, validating its usefulness for IL selection. The solubility of CBZ is influenced by both the anionic structure and temperature. Cytotoxicity tests on HUVEC and GES-1 cells show that all ILs are safe for CBZ dissolution. Based on solubility and toxicity data, [EMIM][Ac] is determined to be the optimal IL.The dissolution mechanism of CBZ in ILs is explored using the σ-profile calculated from the COSMO-RS model and quantum chemical (QC) analysis. ILs with anions that have effective hydrogen bond (HB) acceptability ([Ac]-) are found to be the most efficient solvents for CBZ solvation. ILs with longer alkyl chains in the imidazole cations exhibit reduced polarity, increasing their affinity with CBZ. Therefore, [EMIM][Ac] is the superior IL choice due to its moderate polarity in [EMIM]+ and ideal cationic characteristics with long alkyl chains, along with the strong HB acceptability of [Ac]- anions. The findings have significant implications for choosing appropriate solvents, namely ionic liquids, for CBZ, as well as for selecting solvents with comparable structures for other medicines.

In situ Crystallization of Methanesulfonic Acid, CH3SO3H, and Serendipitous Single Crystal Formation of its Anhydride, (CH3)2S2O5

AbstractMethanesulfonic acid, CH3SO3H, has been crystallized using an in situ technique on a single crystal diffractometer. The crystal structure is monoclinic (P21/c, Z=4, a=842.07(4) pm, b=582.20(3) pm, c=820.38(4) pm, β=106.459(2)°) and stamped by the presence of strong hydrogen bonds. Single crystals of the anhydride of methanesulfonic acid, (CH3)2S2O5, formed as a side product in the reaction of bis‐trimethylsilyl‐sulfate, [(CH3)3SiO]2SO2 with SO3 in a sealed glass ampoule. The monoclinic crystal structure (P21/n, Z=12, a=1794.5(2) pm, b=831.75(7) pm, 1383.4(1) pm, β=110.630(4)°) shows three crystallographically different (CH3)2S2O5 molecules in the unit cell. According to the orientation of the CH3 groups with respect to each other the (CH3)2S2O5 molecule appears as the so‐called trans‐conformer. The structure of both molecules is corroborated by quantum mechanical DFT calculations.

A series of quinazolin-4(3H)-one-morpholine hybrids as anti-lung-cancer agents: Synthesis, molecular docking, molecular dynamics, ADME prediction and biological activity studies.

In this study, we synthesized 15 novel quinazoline-morpholinobenzylideneamino hybrid compounds from methyl anthranilate and we assessed their cytotoxicity via invitro assays against A549 and BEAS-2B cell lines. Molecular docking studies were conducted to evaluate the protein-ligand interactions and inhibition mechanisms on nine different molecular targets, while molecular dynamics (MD) simulations were carried out to assess the stability of the best docked ligand-protein complexes. Additionally, ADME prediction was carried out to determine physicochemical parameters and drug likeness. According to the cytotoxicity assays, compound 1 (IC50 = 2.83 μM) was found to be the most active inhibitor against A549 cells. While the selectivity index (SI) of compound 1 is 29, the SI of the reference drugs paclitaxel and sorafenib, used in this study, are 2.40 and 4.92, respectively. Among the hybrid compounds, 1 has the best docking scores against VEGFR1 (-11.744 kcal/mol), VEGFR2 (-12.407 kcal/mol) and EGFR (-10.359 kcal/mol). During MD simulations, compound 1 consistently exhibited strong hydrogen bond interactions with the active sites of VEGFR1 and 2, and these interactions were maintained for more than 90% of the simulation time. Additionally, the RMSD and RMSF values of the ligand-protein complexes exhibited high stability at their minimum levels around 1-2 Å. In conclusion, these findings suggest that compound 1 may be a potent and selective inhibitor candidate for lung cancer treatment and inhibition of VEGFR2, especially.

Propolis ethanol extract functionalized chitosan/Tenebrio molitor larvae protein film for sustainable active food packaging

The application of novel insect proteins as future food resources in the food field has attracted more and more attention. In this study, a biodegradable antibacterial food packaging material with beneficial mechanical properties was developed using Tenebrio molitor larvae protein (TMP), chitosan (CS) and propolis ethanol extract (PEE) as raw materials. PEE was uniformly dispersed in the film matrix and the composite films showed excellent homogeneity and compatibility. There are strong intermolecular hydrogen bond interactions between CS, TMP, and PEE in the films, which exhibit the structure characteristics of amorphous materials. Compared with CS/TMP film, the addition of 3 % PEE significantly enhanced the elongation at break (34.23 %), water vapor barrier property (22.94 %), thermal stability (45.84 %), surface hydrophobicity (20.25 %), and biodegradability of the composite film. The composite film has strong antioxidant and antimicrobial properties, which were enhanced with the increase of PEE content. These biodegradable films offer an eco-friendly end-of-life option when buried in soil. Composite films can effectively delay the spoilage of strawberries and extend the shelf life of strawberries. Biodegradable active packaging film developed with insect protein and chitosan can be used as a substitute for petroleum-based packaging materials, and has broad application prospects in the field of fruits preservation.

Vibrational analysis, DFT computations of spectroscopic, non-covalent analysis with molecular docking and dynamic simulation of 2-amino-4, 6-dimethyl pyrimidine benzoic acid

Vibration assignments were refined through the use of normal coordinate analysis (NCA), one of several spectroscopic computations employed in extensive investigations into the composition of 2-amino-4,6-dimethylpyrimidine benzoic acid (2ADPB). Red-shifting bands revealed N-H-O hydrogen bonding, which is corroborated by optimised geometry results and vibrational analysis. The bond length and angle have been studied through an optimized geometry at B3PW91/6–31 G (d, p) theory. FMO and NBO methods investigate chemical reactions and strength of 2ADPB. Strong intermolecular hydrogen bond interactions O13‧‧‧H27-N25 and O14-H15‧‧‧N16 have been confirmed by structural studies and remains confirmed through BCP on H15-N16, H27-O13 for 2ADPB have sturdy intermolecular hydrogen bonds interactions. MEP categorizes negative and positive sites, visualizing charge accumulation on individual atoms in the molecule. The molecule showed charge transfer, analyzed with descriptors like LOL and ELF. Kirby-Bauer method confirmed findings across bacterial strains. Molecular Docking explored ligand-protein interactions, while pharmacokinetics was studied using drug features.

Cycling performance of SiOx-Si-C composite anode with different blend ratios of PAA-CMC as binder for lithium sulfur batteries

Silicon (Si) -based materials have been identified as a potential alternative anode owing to their superior theoretical capacity compared to conventional graphitic carbon. Nevertheless, the huge volume change (approximately 300%) that occurs while cycling still hampers this system from 100% practical applications. Silicon-monoxide (SiOx)-based anode materials, on the other hand, are being explored extensively due to their unique properties such as high theoretical capacity, formation of Li2O and LiSiO4 during initial lithiation process that act as a natural volume buffer matrix to accommodate volume changes and formation of a stable solid electrolyte interphase layer, which improves the cyclability and capacity retention. Although poly (vinylidene fluoride) (PVdF) is widely used as a binder, the weak van der Waals forces between PVdF and silicon-based particles fail to bind particles effectively, when substantial volume change occurs. Herein, we prepare a series of SiOx-Si-C electrodes with different binders poly (acrylic acid) (PAA), carboxyl methyl cellulose (CMC) and their blends as binder. The prepared polymeric blends are subjected to thermal, morphological, mechanical and physico-chemical analyses. The Li/ SiOx-Si-C cell assembled with 100% PAA as binder delivered a discharge capacity of 1908 mAh g−1 on its first cycle and 724 mAh g−1 on its 100th cycle with a fade in capacity of 11.8 mAh g−1 per cycle. Upon the incorporation of CMC in the PAA blend the cycling performance was found to be poor. Among the various investigated compositions, the electrode with sole poly (acrylic acid) as a binder offers the highest discharge capacity and this is attributed to the high concentration of the functional (carboxylic) group which forms strong hydrogen bonds with - OH groups on the SiOx or carbon surface. The interfacial properties of the polymeric binders are thoroughly investigated by spectroscopies and electrochemical tests.Graphical abstract

Strategic design of magnetic ionic covalent organic frameworks incorporating amino acid ionic liquids for enhanced selectivity adsorption of benzimidazoles

Advancing the frontier of material design, our innovative magnetic ionic covalent organic framework (MiCOF) masterfully overcomes traditional barriers in selective adsorption, pioneering new functionalities and surface engineering techniques to effectively target and mitigate the impacts of benzimidazoles (BZDs). In previous studies, the idea of designing magnetic nanomaterials through theoretical screening of ionic liquids has been successfully proposed. This work proposed a theoretical and practical design for MiCOFs, aimed at providing a sensitive, selective, rapid, and straightforward method for analyzing trace substances in complex biological matrices. In a gentle one-pot process, the surface of Fe3O4 was coated with covalent organic frameworks (COFs) layer, followed by the modification with amino acid ionic liquid (AAIL) through covalent radical polymerization, facilitated by the abundant unsaturated vinyl groups present. This resulted in MiCOFs (Fe3O4@COF-AAIL) with a stable structure. Compared to unmodified Fe3O4@COF, Fe3O4@COF-AAIL exhibited excellent adsorption selectivity for BZDs. This enhanced selectivity is primarily due to the strong hydrogen bonds and π-π interactions between AAIL and BZDs, aligning well with COSMO-RS theoretical screening predictions. The development of magnetic dispersive solid-phase extraction (MDSPE) enabled rapid processing of BZDs in plasma with low matrix effects (0.9–1.3). This study not only validates a robust framework for the selective separation of trace contaminants in complex biological matrices but also advances the design and application of MiCOFs, setting a new paradigm in material science that could transform the design of novel materials for specific tasks.

Enhancing the Thermostability and Catalytic Activity of the Lipase from Rhizopus oryzae via Introducing N-Glycosylation.

Lipase from Rhizopus oryzae (ROL) exhibits remarkable sn-1,3 stereoselectivity and catalytic activity, but its poor thermostability limits its applications in the production of 1,3-dioleoyl-2-palmitoyl glycerol (OPO, a high-quality substitute for human milk fat). In this work, a semirational method was proposed to engineer the thermostability and catalytic activity of 4M (ROL mutant in our previous study). First, a computer-aided design is performed using 4M as a template, and N-glycosylation mutants are then recombinantly expressed and screened in Pichia pastoris, the optimal mutant N227 exhibited a half-life of 298.8 h at 45 °C, which is 7.23-folds longer than that of 4M. Its catalytic activity also reached 1043.80 ± 61.98 U/mg, representing a 29.2% increase compared to 4M (808.02 ± 47.02 U/mg). Molecular dynamics simulations of N227 suggested that the introduction of glycan enhanced the protein rigidity, while the strong hydrogen bonds formed between the glycan and the protein stabilized the lipase structure, thereby improving its thermostability. The acidolysis reaction between oleic acid (OA) and glycerol tripalmitate (PPP) was successfully carried out using immobilized N227, achieving a molar conversion rate of 90.2% for PPP. This engineering strategy guides the modification of lipases, while the glycomutants obtained in this study have potential applications in the biosynthesis of OPO.

A strategy for introducing biomass naringin molecules into regenerated cellulose fibers: Construction of both low fibrillation tendency and high strength lyocell fibers

Lyocell fiber is regarded as one of the most representative green fibers, which has higher strength than other regenerated cellulose fibers, but is easily fibrillated when produced. Here, we developed a strategy to strengthen lyocell fiber by the strong interaction between the small molecules of biomass and polymeric cellulose chain networks. The green biomass naringin molecules containing phenolic hydroxyl structures are introduced into the solvent (N-methyl morpholine-N-oxide, NMMO) system of producing lyocell fiber, and the rational arrangement of naringin and cellulose molecular chains is precisely controlled through fiber-forming process of dry-jet-wet spinning and wet-drafting. Due to the interaction of strong hydrogen bond between naringin and cellulose molecules, the strength, toughness and Young’s modulus of the obtained composite fibers reached 500.78 ± 33.57 MPa, 28.16 ± 4.65 MJ/m3 and 23.06 ± 1.01 GPa, respectively, which were 86.96 %, 44.86 % and 48.97 % higher than those of pure lyocell fibers. In addition, naringin molecules have two directional (the longitudinal and transverse direction) bonding effects, which not only improves the mechanical performance of the fiber, but also reduces the fibrillation. The simultaneously improvement of mechanical performance and the reduction of fibrillation tendency are unprecedented in related studies, which contributes to the production of better performance lyocell fibers.

Deep Eutectic Solvent-Based Polymer Electrolyte Films for an Electrochemical Double Layer Cell

Polymer electrolyte films based on DES were prepared with the solution cast technique. DES(ChCl-glycerol) was prepared with two different glycerols: one purchased from the industry and the other fabricated in the lab from waste vegetable oil. Two polymer electrolyte films were prepared with two different DES (industrial and from oil-based glycerol) were named D1 and D2, respectively. Fabricated polymer film (D1) with DES (prepared with industrial glycerol) shows excellent physical and thermochemical properties. The molecular and structural characteristics of the film were studied via FTIR and XRD. The surface morphology, thermal and electric properties of film were studied with SEM, TGA, and impedance spectroscopy techniques, respectively. The obtained films were flexible, strong, and transparent. Its properties are ascribed to a strong coherent hydrogen bond network with the matrix of the polymer. Polymer electrolyte film D1 exhibited good ionic conductivity of 1.25×10-3 Scm-1. The prepared polymer film was applied as solid electrolytes in symmetric solid-state supercapacitors. The fabricated EDLC cell exhibits specific capacitance of at voltage with scan rate. Moreover, the prepared electrolyte is biocompatible, environment safe and cost-effective that offers a new path for adaptable electronic devices. Keywords: Green electrolytes, Supercapacitor, Deep eutectic solvent, Hydrogen bond network, Choline chloride-glycerol.

Colorimetric detection of neomycin sulfate in serum based on ultra-small gold nanoparticles with peroxidase-like activity

Neomycin sulfate (NEO) is a kind of aminoglycoside antibiotics. Because of its strong ototoxicity, nephrotoxicity and other side effects, its content in the body should be strictly monitored during use. In this paper, a rapid colorimetric detection method for NEO based on ultrasmall polyvinylpyrrolidone modified gold nanoparticles (PVP/Au NPs) with peroxidase-like activity was developed. Firstly, ultra small PVP/Au NPs with weak peroxidase-like activity were synthetized. When they were mixed with NEO, strong hydrogen bonds were formed between NEO and PVP, resulting in the aggregation of PVP/Au NPs, and the aggregated PVP/Au NPs showed stronger peroxidase-like activity. Therefore, rapid colorimetric detection of NEO was achieved by utilizing the enhanced peroxidase-like activity mechanism caused by the aggregation of ultra small PVP/Au NPs. The naked eye detection limit of this method is 50 nM. Within the range of 1 nM-300 nM, there was a good linear relationship between NEO concentration and the change in absorbance intensity of PVP/Au NPs-H2O2-TMB solution at 652 nm, with the regression curve of y = 0.0045x + 0.0525 (R2 = 0.998), and the detection limit is 1 nM. In addition, this method was successfully applied to the detection of NEO in mouse serum. The recoveries were 104.4 % −107.6 % compared with HPLC assay results, indicating that this method for NEO detection based on PVP/Au NPs has great potential in actual detection of NEO in serum.