Strong Solid-state Emission Research Articles

Multicomponent Diversity-Oriented Access to Boronic-Acid-Derived Pyrrolide Salicyl-Hydrazone Fluorophores with Strong Solid-State Emission.

Fluorescent molecular platforms are highly sought after for their applications in biology and optoelectronics but face challenges with solid-state emission quenching. To address this, bulky substituents or aggregation-induced emission luminogens to restrict intramolecular motion are used to enhance the brightness. Here, we have successfully engineered a novel class of boron complexed pyrrolide salicyl-hydrazone fluorophores named BPSHY. These dyes were synthesized through a diversity-oriented condensation of pyrrole and salicylaldehyde derivatives combined with various aromatic boronic acids. The resulting 3D structures, owing to bulky boron axially substituted aryl groups, impart excellent solubility in a variety of solvents. Significantly, the BPSHY dyes exhibit strong absorption in the visible region and remarkably large Stokes shifts. Crucially, they demonstrate intense emission in aqueous solutions due to aggregation-induced emission effects. In solid-states, these dyes achieve high quantum yields, reaching up to 58%. Further expanding their utility, we developed two new BPSHY probes: one incorporating morpholine and another containing triphenylphosphine salt. Both of them are found to specifically label subcellular organelles such as lysosomes and mitochondria within live cells. Notably, these probes demonstrate exceptional staining efficacy and two-photon fluorescence feature. This highlights the considerable promise of BPSHY fluorophores for monitoring and visualizing the dynamic transformations of organelles.

Triphenylamine-Based Solid-State Emissive Fluorene Derivative with Aggregation-Induced Emission Enhancement Characteristics

Aggregation-induced emission (AIE) has garnered considerable attention in recent years. Understanding the mechanisms underlying AIE phenomena is crucial. Here, we present the design and synthesis of a novel fluorene derivative (4) based on triphenylamine, which exhibits typical AIE properties. The structure of it was totally characterized using FT-IR, MALDI-TOF mass analysis, elemental analysis, 1H, and 13C NMR spectroscopy. It displayed strong solid-state emission with diverse fluorescence characteristics. The AIE property of the compound was systematically studied using photoluminescence spectroscopy, revealing a distinct yellow light-emitting phenomenon. The solid-state luminescence showed a red shift of 148 nm compared to its luminescence in dilute dimethylformamide (DMF) solutions. Moreover, photophysical characteristics, including absorption and emission spectra, as well as fluorescence lifetime, were examined using UV–vis absorption and fluorescence emission spectroscopy. Compound (4) exhibited superior photosensitization abilities in both solid and solution states, with a notably enhanced effect observed in the solid state compared to the solution state.

A novel dimer induced AIE smart material for fluorescence colorimetric detection of food freshness and Zn2+

A simple, smart material (2-(benzo[d]thiazol-2-yl)-4-hydroxy-7-methylphthalazin-1(2H)-one, BTHM) have been developed by one-step reaction, which displayed an aggregation-induced emission (AIE) effect because of due to the unique dimer formation by intermolecular hydrogen bonds by XRD measurements. BTHM exhibited strong solid-state emission and is sensitive to Et3N/CH2Cl2 vapor stimulus and could be used as a portable test strip for identifying different concentrations of Et3N/CH2Cl2 vapor. Also, it successfully realized blue/green luminescence switching by the external Et3N/AcOH vapor stimuli with a high repeatability. BTHM labels have been preferentially used for real-time and visual monitoring of the freshness of the pork and shrimp food. Also, the BTHM display fluorescence colorimetric response to Zn2+ in EtOH/H2O (1/9, V/V, pH=7.4) medium with high selectivity and sensitivity. Importantly, BTHM could be used to monitor Zn2+ in living A549 cells by an outstanding fluorescence color signal change. Further, the theoretical calculations have been performed to address the sensing mechanism.

Universal Design and Efficient Synthesis for High Ambipolar Mobility Emissive Conjugated Polymers.

High ambipolar mobility emissive conjugated polymers (HAME-CPs) are perfect candidates for organic optoelectronic devices, such as polymer light emitting transistors. However, due to intrinsic trade-off relationship between high ambipolar mobility and strong solid-state luminescence, the development of HAME-CPs suffers from high structural and synthetic complexity. Herein, a universal design principle and simple synthetic approach for HAME-CPs are developed. A series of simple non-fused polymers composed of charge transfer units, π bridges and emissive units are synthesized via a two-step microwave assisted C-H arylation and direct arylation polymerization protocol with high total yields up to 61 %. The synthetic protocol is verified valid among 7 monomers and 8 polymers. Most importantly, all 8 conjugated polymers have strong solid-state emission with high photoluminescence quantum yields up to 24 %. Furthermore, 4 polymers exhibit high ambipolar field effect mobility up to 10-2 cm2 V-1 s-1, and can be used in multifunctional optoelectronic devices. This work opens a new avenue for developing HAME-CPs by efficient synthesis and rational design.

High Mobility Emissive Excimer Organic Semiconductor Towards Color-Tunable Light-Emitting Transistors.

Organic light-emitting transistors (OLETs) are highly integrated and minimized optoelectronic devices with significant potential superiority in smart displays and optical communications. To realize these various applications, it is urgently needed for color-tunable emission in OLETs, but remains a great challenge as a result of the difficulty for designing organic semiconductors simultaneously integrating high carrier mobility, strong solid-state emission, and the ability for potential tunable colors. Herein, a high mobility emissive excimer organic semiconductor, 2,7-di(2-anthryl)-9H-fluorene (2,7-DAF) was reasonably designed by introducing a rotatable carbon-carbon single bond connecting two anthracene groups at the 2,7-sites of fluorene, and the small torsion angles simultaneously guarantee effective conjugation and suppress fluorescence quenching. Indeed, the unique stable dimer arrangement and herringbone packing mode of 2,7-DAF single crystal enables its superior integrated optoelectronic properties with high carrier mobility of 2.16 cm2 ⋅ V-1 ⋅ s-1 , and strong excimer emission with absolute photoluminescence quantum yield (PLQY) of 47.4 %. Furthermore, the voltage-dependent electrically induced color-tunable emission from orange to blue was also demonstrated for an individual 2,7-DAF single crystal based OLETs for the first time. This work opens the door for a new class of high mobility emissive excimer organic semiconductors, and provides a good platform for the study of color-tunable OLETs.

Role of π-bridge and strong solid-state emission in triphenylamine-benzothiazole based nonlinear optical dyes

Triphenylamine and benzothiazole together form an effective electron donor and acceptor pair, producing a strong and versatile fluorophore. By adjusting the π-bridge between this D-A pair, the fluorescence quantum yield, two-photon absorption cross-section, and current density of electroluminescence devices can be fine-tuned. Three chromophores, namely APCN, ADPCN, and ATCN, featuring phenyl, diphenyl, and thiophene as π-bridges, exhibited fluorescence and solvatochromic properties in solution. When the solubility of solvent was reduced, the fluorescence became even more pronounced due to aggregation. The addition of the cyanovinyl group facilitated this aggregation-induced emission enhancement (AIEE)-like effect, leading to stronger emission rather than radiationless relaxation in the solid state. Moreover, the intramolecular charge transfer improved the nonlinear response, while the coexistence of AIE ensured two-photon excitation fluorescence in solid species. Among the chromophores, ADPCN with a biphenyl π-bridge showed relatively good performance. Additionally, preliminary tests of electroluminescent devices demonstrated their potential as efficient emitting materials. This systematic exploration revealed the impact of organic functional groups on photophysical properties and provided a platform for developing highly fluorescent materials.

Brønsted Base Prompted sp3 C-H Latent Nucleophiles to Access α-Branched Amines Bearing β-Carbonyl by Cleaving Amide and Ester Bonds.

α-Branched amines are key motifs that exist in a plethora of natural products and pharmaceuticals. Herein we disclose the first convergent synthesis of α-branched amines bearing β-carbonyl in isoindolinones by employing unactivated tertiary amides and unactivated alkyl esters as benign electrophile sources. The reaction proceeds by the direct aroylation of a C(sp3)-H carbon adjacent to the nitrogen atom in core isoindolinones. Several amides and esters were screened to choose the potential acyl source for the substrate scope. The reaction is carried out with a repertoire of substrates under mild conditions and shows high functional group compatibility. Remarkably the reaction is amenable to organometallic ferrocenyl ester and indole methyl esters bearing an acidic NH moiety. Strikingly no trace of amidation product 8 is observed. In particular α-branched amines bearing β-carbonyl synthesized from indole methyl esters are considered important targets, as both motifs are prevalent in many drugs. This protocol is scalable, and products obtained from indole methyl esters show strong solid-state emission properties which are complementary with DFT calculations.

Halogen Bond-Driven Aggregation-Induced Emission Skeleton: N-(3-(Phenylamino)allylidene) Aniline Hydrochloride.

Aggregation-induced emission (AIE) is a unique photophysical process, and its emergence brings a revolutionary change in luminescence. However, AIE-based research has been limited to a few classical molecular skeletons, which is unfavorable for in-depth studies of the photophysical characteristics of AIE and the full exploitation of their potential values. There is an urgent need to develop new skeletons to rise to the challenges of an insufficient number of AIE core structures and difficult modification. Here, we report a novel dumbbell AIE skeleton, in which two phenyls are connected through (E)-3-iminoprop-1-en-1-amine. This skeleton shows extremely strong solid-state emission with an absolute quantum yield up to 69.5%, a large Stokes shift, and typical AIE characteristics, which well resolves the challenge of difficult modification and low luminous efficiency of the traditional AIE skeletons. One-step reaction, high yield, and diversified modification endow the skeleton with great scalability from simple to complicated, or from symmetrical to asymmetrical structures, which establishes the applicability of the skeleton in various scenarios. These molecules self-assemble into highly ordered layer-, rod-, petal-, hollow pipe-, or helix-like nanostructures, which contribute to strong AIE emission. Crystallographic data reveal the highly ordered layer structures of the aggregates with different substituents, and a novel halogen bond-driven self-assembly mechanism that restricts intramolecular motion is clearly discovered. Taking advantage of these merits, a full-band emission system from green to red is successfully established, which displays great potential in the construction of light-emitting films and advanced light-emitting diodes. The discovery of this AIE skeleton may motivate a huge potential application value in luminescent materials and lead to hitherto impossible technological innovations.

Cover Picture: Regulating Crystal Packing by Terminal tert‐Butylation for Enhanced Solid‐State Emission and Efficacious Charge Transport in an Anthracene‐Based Molecular Crystal (Angew. Chem. Int. Ed. 45/2022)

An anthracene-based molecular crystal with a unique “slipped herringbone” packing motif was developed by crystal engineering via terminal tert-butylation. Appropriate exciton–exciton coupling/electron–phonon coupling originating from the unique crystal packing induces a remarkably strong solid-state emission and efficient charge transport, as reported by Liqiang Li, Huanli Dong, Wenping Hu et al. in their Research Article (DOI: 10.1002/anie.202206825).

Two distinctly fluorescent BioAIEgens originated from the combination of natural rosin and chromophoric triphenylamine

Aggregation-induced emission (AIE) luminogens have been widely used in various fields. Among them, BioAIEgens (AIEgens from natural resources) have been highly concerned by researchers because of their unique advantages. However, the number of BioAIEgens directly derived from nature is limited. Therefore, chemical modification on natural resources may be an effective way to obtain more BioAIEgens. In this paper, because the rigid alicyclic ring of dehydroabietic acid (DA) has the effect of restricting molecular motion, we successfully obtained two rosin-based BioAIEgens (DAA-TPA and DAMBA-TPA) by combining DA with triphenylamine. Interestingly, DAA-TPA obtained by connecting TPA with the aliphatic ring of DA has TICT-AIE and strong solid-state emission properties, while DAMBA-TPA obtained by connecting TPA with the aromatic ring of DA shows an atypical AIE and weak solid emission effect. Two control molecules were designed to investigate the influence of the introduction of aliphatic ring and aromatic ring on the photophysical properties of TPA. The results showed that DA containing both aliphatic ring and aromatic ring may be used as a precursor to construct BioAIEgens with different AIE properties. In addition, based on the fluorescence performance of DAA-TPA, we applied it to the detection of trace water in acetonitrile (ACN).

Multicolor Nitrogen-Doped Carbon Quantum Dots for Environment-Dependent Emission Tuning.

Carbon quantum dots (CQDs) have potential applications in many fields such as light-emitting devices, photocatalysis, and bioimaging due to their unique photoluminescence (PL) properties and environmental benignness. Here, we report the synthesis of nitrogen-doped carbon quantum dots (NCQDs) from citric acid and m-phenylenediamine using a one-pot hydrothermal approach. The environment-dependent emission changes of NCQDs were extensively investigated in various solvents, in the solid state, and in physically assembled PMMA–PnBA–PMMA copolymer gels in 2-ethyl-hexanol. NCQDs display bright emissions in various solvents as well as in the solid state. These NCQDs exhibit multicolor PL emission across the visible region upon changing the environment (solutions and polymer matrices). NCQDs also exhibit excitation-dependent PL and solvatochromism, which have not been frequently investigated in CQDs. Most CQDs are nonemissive in the aggregated or solid state due to the aggregation-caused quenching (ACQ) effect, limiting their solid-state applications. However, NCQDs synthesized here display a strong solid-state emission centered at 568 nm attributed to the presence of surface functional groups that restrict the π–π interaction between the NCQDs and assist in overcoming the ACQ effect in the solid state. NCQD-containing gels display significant fluorescence enhancement in comparison to the NCQDs in 2-ethyl hexanol, likely because of the interaction between the polar PMMA blocks and NCQDs. The application of NCQDs-Gel as a solid/gel state fluorescent display has been presented. This research facilitates the development of large-scale, low-cost multicolor phosphor for the fabrication of optoelectronic devices, sensing, and bioimaging applications.

Two-photon AIEgen based on dicyanoisophorone derivative: Synthesis, characterization and cells imaging

A dicyanoisophorone derivative (1) with a D-π-A structure has been synthesized. 1 displayed characteristic of intramolecular charge transfer (ICT) and exhibited very weak fluorescence in solvents (ϕf ≤ 0.01) but strong red fluorescence in solid-state (ϕf = 0.45). Mechanism demonstrated that the strong emission in solid state resulted from aggregation-induced emission (AIE). Furthermore, 1 exhibited a strong two-photon fluorescence in solid-state and a bright two-photon fluorescence imaging in live cells was obtained upon irradiation with 900 nm fs laser.

Strong dual-state emission of unsymmetrical and symmetrical thiazolothiazole-bridged imidazolium salts

A novel thiazolothiazole-bridged imidazole derivative (1) was found to exhibit blue fluorescence in gaseous state or in methanol and yellow fluorescence in solid state. The N-alkylation of imidazole subunit(s) in 1 using n-propyl iodide generated unsymmetrically or symmetrically alkylated thiazolothiazole-bridged imidazolium salts with good water solubility and remarkably strong emission in solution. Furthermore, the replacement of iodide counter-anion by triflate or bis(trifluoromethane sulfonyl)imide achieved remarkably strong emission in solid state and in solution as well as good water solubility. The strong fluorescence of dicationic salts with triflate and NTf2– counter-anions in solid state can be ascribed to their twisted and rigid structures induced by interionic C−H···F hydrogen bonding.

Achieving gas pressure-dependent luminescence from an AIEgen-based metal-organic framework

Materials exhibiting aggregation-induced emission (AIE) behaviour enable strong emission in solid state and can respond to various external stimuli, which may facilitate the development of materials for optical sensing, bioimaging or optoelectronic devices. Herein, we use an AIE luminogen 2’,5’-diphenyl-[1,1’:4’,1”-terphenyl]-4,4”-dicarboxylic acid as the ligand to prepare an AIEgen-based MOF (metal-organic framework) named FJI-H31. FJI-H31 exhibits bright luminescence under ambient conditions (under air and at room temperature), but almost no emission is observed under vacuum. Our investigation shows that the emission intensity displays a smooth and reversible enhancement with increased gas pressure, which may be attributed to the restriction of intramolecular motion brought by structural deformation under pressure stimulus. Unlike most pressure-responsive MOFs, the luminescence reverts to its original state once gas pressure recovers. By virtue of its unique optical properties, a luminescent MOF with sensing ability of gas-pressure is realized.

Highly emissive D-A-π-D type aggregation-induced emission (AIE) or aggregation-induced emission enhancement (AIEE)-active benzothiadiazole derivatives with contrasting mechanofluorochromic features

Mechanochromic luminophors with strong solid-state emission are promising candidates for high-contrast mechanochromic luminescence materials. Meanwhile, mechanically responsive luminogenic molecules with tricolor switching are highly desirable but are seldom reported. In this work, three anthracene-based donor–acceptor-π-donor (D-A-π-D) type benzothiadiazole derivatives were designed and synthesized. These luminogens showed remarkable aggregation-induced emission (AIE) or aggregation-induced emission enhancement (AIEE) effect. Furthermore, these luminogens exhibited bright and different solid state fluorescence involving yellow-green, yellow and orange colors, and the fluorescence of their solids could be effectively regulated by mechanical grinding. For luminogen 1, its solid displayed reversible two-color mechanofluorochromic property. As for luminogens 2 and 3, their solids displayed fluorescent colors change from yellow to yellow-green upon slight grinding, and the yellow-green light-emitting solids were converted into orange fluorescent solids after heavy grinding, demonstrating interesting three-color mechanofluorochromism features.

An asymmetric 2,3-fluoranthene imide building block for regioregular semiconductors with aggregation-induced emission properties.

For organic semiconductors, the development of electron-deficient building blocks has lagged far behind that of the electron-rich ones. Moreover, it remains a significant challenge to design organic molecules with efficient charge transport and strong solid-state emission simultaneously. Herein, we describe a facile synthetic route toward a new π-acceptor imide building block, namely 2,3-fluoranthene imide, based on which four regioregular small molecules (F1–F4) are synthesized by tuning the imide orientations and the central linkage bridges. All molecules exhibit attractive aggregation-induced emission (AIE) characteristics with strong far-red emission in the powder state, and F3 shows the highest photoluminescence quantum yield of 5.9%. F1 and F3 with a thiophene bridge present an obvious p-type characteristic, while for F3 with an outward imide orientation, the maximum hole mobility from a solution-processed field-effect transistor (FET) device reaches 0.026 cm2 V−1 s−1, being ∼104 times higher than the value of F1 with an inward imide orientation. By using a fluorinated thiophene bridge, the resulting F2 and F4 can be turned into n-type semiconductors, showing an electron mobility of ∼1.43 × 10−4 and ∼3.34 × 10−5 cm2 V−1 s−1, respectively. Our work not only demonstrates that asymmetric 2,3-fluoranthene imide is a promising building block for constructing organic materials with high carrier mobility and strong solid-state emission, but also highlights the importance of regioregular structures in the materials' properties.

Dual Solution-/Solid-State Emissive Excited-State Intramolecular Proton Transfer (ESIPT) Dyes: A Combined Experimental and Theoretical Approach.

Excited-state intramolecular proton transfer (ESIPT) dyes typically show strong solid-state emission, but faint fluorescence intensity is observed in the solution state owing to detrimental molecular motions. This article investigates the influence of direct (hetero)arylation on the optical properties of 2-(2'-hydroxyphenyl)benzoxazole ESIPT emitters. The synthesis of two series of ESIPT emitters bearing substituted neutral or charged aryl, thiophene, or pyridine rings is reported herein along with full photophysical studies in solution and solid states, demonstrating the dual solution-/solid-state emission behavior. Depending on the nature of substitution, several excited-state dynamics are observed: quantitative or partially frustrated ESIPT process or deprotonation of the excited species. Protonation studies revealed that pyridine substitution triggered a strong increase of quantum yield in the solution state for the protonated species owing to favorable quinoidal stabilization. These attractive features led to the development of a second series of dyes with alkyl or aryl pyridinium moieties showing strong tunable solution/solid fluorescence intensity. For each series, ab initio calculations helped rationalize and ascertain their behavior in the excited state and the nature of the emission observed by the experimental results.

Pyrene-cyanostyrene-pyridine triad: Multi-stimuli responsive fluorescent emitter and mitochondrial imaging

Tuning the fluorescence of π-conjugated small organic molecules through the structural modifications and in the presence of external stimuli have found immense applications ranging from sensing, switching, optoelectronics to bioimaging. Herein, we demonstrated a simple design strategy for the synthesis of a pyrene-cyanostyrene-pyridine molecular triad (PYBNP) using a cost-effective, one-step Knoevenagel condensation between 1-pyrenecarboxaldehyde and 2-(4-(pyridin-4-yl)phenyl)acetonitrile. PYBNP exhibited strong solid-state emission having a quantum yield of ∼ 36 ± 3% due to the deactivation of nonradiative decay channels through the restriction of intramolecular rotations and reduced π-π stacking interactions as revealed from the crystal structure analysis. Similarly, PYBNP was found to be highly emissive in the constrained environments like viscous medium and aggregated state. The optical properties of PYBNP could be tuned by the UV light-mediated dynamic Z/E-isomerization as elucidated through fluorescence spectroscopy and NMR analysis. Additionally, the pyridinic nitrogen centre allowed the fabrication of methylated analog (PYBNPM; a new cationic photoresponsive species). The cationic PYBNPM showed a better solvatochromic behavior contrary to PYBNP due to the efficient intramolecular charge transfer (ICT). The different crystal packing of PYBNP and that of hexafluorophosphate salts of PYBNPM led to distinct fluorescent properties in the solid-state. As a preliminary exploration, the cationic PYBNPM(PF6) was employed for the specific imaging of the mitochondria through multiple fluorescence channels in an aqueous medium. The cost-effective and viable design strategy demonstrated for the fabrication of a simple molecular triad holds the promise for the emergence of new functional fluorescent molecules to molecular materials for task-specific applications.

A Family of Highly Fluorescent and Membrane-Permeable Bis(BF2) Acyl-Pyridinylhydrazine Dyes with Strong Solid-State Emission and Large Stokes Shifts: The BOAPH Fluorophores.

Organic small-molecule fluorescent chromophores have become essential to modern chemical, biological, and materials related investigations. Herein, a straightforward synthesis and subsequent borylation were presented to form a novel family of bisBF2-anchoring acyl-pyridinylhydrazine, which we named BOAPH. The chromophore enjoys outstanding structural diversities owing to varied acyl chlorides and N-heteroarenylhydrazides. These resultant BOAPH dyes are confirmed by NMR, HRMS, and single-crystal X-ray structure analysis. Their spectroscopic properties were studied, and most of the strong absorbance and bright fluorescence with maximum wavelengths centered in the range of 400 and 650 nm. More importantly, they exhibit promising fluorescence quantum yields up to 0.79 in solution and solid states, good photostability, and large Stokes shifts. Furthermore, a respective BOAPH dye with a para-dimethylaminophenyl group exhibited the interesting ability of ultrafast staining and two-photon imaging, which can specifically label lipid droplets of living cells immediately without the need for incubation.

Stimuli-responsive flexible membrane via co-assembling sodium alginate into assembly membranes of rod-like cellulose nanocrystals with an achiral array

Uniaxially assembling cellulose nanocrystals (CNCs) can induce strong solid-state emission based on optical inelastic scattering, whereas the CNC assembly membranes are not flexible enough for further applications. Thus, we introduced CNC into flexible sodium alginate (SA) and further controlled the assembly structure of CNC to increase the membrane toughness and maintain the emission properties. The results indicated that the stretchability increased from 0.027 % to 37 % when 33–37% when 33 % SA was introduced. The assembly achirality was controlled by tuning CNC concentration in suspension, and the co-assembly could further control the wavelength of the assembly-induced emission from 420 nm to 440 nm. Furthermore, the improved stretchability made assembly membrane an optical sensor, whose excitation wavelength blue-shifted about 30 nm under a 30 % strain. The emission of the co-assembly membrane could also respond to humidity, and this cellulose-based material should have great potential in biosensor and wearable devices.