Membrane Stress Research Articles

Investigation of membrane stress continuously adjustable fiber optic acoustic sensor based on inverse piezoelectric effect

In this paper, a fiber optic acoustic sensor with continuously adjustable membrane stress technology is proposed, in which the stress exerted on the membrane can be flexibly adjusted by employing the inverse piezoelectric effect of lead zirconate titanate (PZT) tubular pedestal. First, the response mechanism of stress on the membrane is investigated theoretically. Based on this principle, the effect of adjustable stress on the flat response region and sensitivity of a single mode-multimode-single mode (SMS) fiber optic acoustic sensor are studied experimentally. The experimental results reveal that the flat response region of the sensor extends from 250 Hz to 450 Hz following the continuous increase in the membrane stress by changing the positive direct current voltage applied on PZT from 0 V to 100 V; meanwhile, the sensitivity decreases gradually from 336.5 mV Pa−1 to 162.7 mV Pa−1. The results also verify that the average minimum detectable pressure of the sensor is maintained at 0.54 mPa Hz−1/2 with a fluctuation of 0.08 mPa Hz−1/2 during the tuning process of membrane stress, which provides a flexible method for performance and applicability improvement of membrane-based fiber optic acoustic sensors.

Functional analysis of basidiomycete specific chitin synthase genes in the agaricomycete fungus Pleurotus ostreatus

Chitin is an essential structural component of fungal cell walls composed of transmembrane proteins called chitin synthases (CHSs), which have a large range of reported effects in ascomycetes; however, are poorly understood in agaricomycetes. In this study, evolutionary and molecular genetic analyses of chs genes were conducted using genomic information from nine ascomycete and six basidiomycete species. The results support the existence of seven previously classified chs clades and the discovery of three novel basidiomycete-specific clades (BI–BIII). The agaricomycete fungus Pleurotus ostreatus was observed to have nine putative chs genes, four of which were basidiomycete-specific. Three of these basidiomycete specific genes were disrupted in the P. ostreatus 20b strain (ku80 disruptant) through homologous recombination and transformants were obtained (Δchsb2, Δchsb3, and Δchsb4). Despite numerous transformations Δchsb1 was unobtainable, suggesting disruption of this gene causes a crucial negative effect in P. ostreatus. Disruption of these chsb2–4 genes caused sparser mycelia with rougher surfaces and shorter aerial hyphae. They also caused increased sensitivity to cell wall and membrane stress, thinner cell walls, and overexpression of other chitin and glucan synthases. These genes have distinct roles in the structural formation of aerial hyphae and cell walls, which are important for understanding basidiomycete evolution in filamentous fungi.

Dependance of Membrane Stress on the Supports Geometry of the Barrel-Vault Shaped Tensile Membrane Structures

Dependance of Membrane Stress on the Supports Geometry of the Barrel-Vault Shaped Tensile Membrane Structures

Comparative transcriptome analysis reveals the redirection of metabolic flux from cell growth to astaxanthin biosynthesis in Yarrowia lipolytica.

Engineering Yarrowia lipolytica to produce astaxanthin provides a promising route. Here, Y. lipolytica M2 producing a titer of 181 mg/L astaxanthin was isolated by iterative atmospheric and room-temperature plasma mutagenesis and diphenylamine-mediated screening. Interestingly, a negative correlation was observed between cell biomass and astaxanthin production. To reveal the underlying mechanism, RNA-seq analysis of transcriptional changes was performed in high producer M2 and reference strain M1, and a total of 1379 differentially expressed genes were obtained. Data analysis revealed that carbon flux was elevated through lipid metabolism, acetyl-CoA and mevalonate supply, but restrained through central carbon metabolism in strain M2. Moreover, upregulation of other pathways such as ATP-binding cassette transporter and thiamine pyrophosphate possibly provided more cofactors for carotenoid hydroxylase and relieved cell membrane stress caused by astaxanthin insertion. These results suggest that balancing cell growth and astaxanthin production may be important to promote efficient biosynthesis of astaxanthin in Y. lipolytica.

Progress on 3D tubular passive electronics: Residual stress-based fabrication, application, and modeling

The platform concept and methodology to create three-dimensional (3D) tubular structures by releasing the stress of two-dimensional multilayer membranes has been demonstrated for the design and fabrication of advanced integrated passive electronics, which revolutionizes their design and fabrication, enabling extraordinarily strong electromagnetic coupling effects and high energy storage densities, for the miniaturization of a variety of systems. In this perspective, we highlight the important recent progress, which constitutes the scope of understanding of 3D tubular passive electronics, including fabrication techniques, applications, and multi-physics modeling. Basic 3D tubular inductive and capacitive components are discussed, in addition to complex and composite devices and systems such as transformers, filters, and antennas. Finally, state-of-the-art strategies to engineer reconfigurable 3D tubular structures are discussed, with the intention to inspire a more disruptive design of passive electronics.

Membrane Lipids Augment Cell Envelope Stress Signaling via the MadRS System to Defend Against Antimicrobial Peptides and Antibiotics in Enterococcus faecalis.

Enterococci have evolved resistance mechanisms to protect their cell envelopes against bacteriocins and host cationic antimicrobial peptides (CAMPs) produced in the gastrointestinal environment. Activation of the membrane stress response has also been tied to resistance to the lipopeptide antibiotic daptomycin. However, the actual effectors mediating resistance have not been elucidated. Here, we show that the MadRS (formerly YxdJK) membrane antimicrobial peptide defense system controls a network of genes, including a previously uncharacterized three gene operon (madEFG) that protects the E. faecalis cell envelope from antimicrobial peptides. Constitutive activation of the system confers protection against CAMPs and daptomycin in the absence of a functional LiaFSR system and leads to persistence of cardiac microlesions in vivo. Moreover, changes in the lipid cell membrane environment alter CAMP susceptibility and expression of the MadRS system. Thus, we provide a framework supporting a multilayered envelope defense mechanism for resistance and survival coupled to virulence.

Relevance of monitoring residual stresses and the need to reduce them

The objective of the study is to show the significant impact of taking into account the actual values of residual stresses on the strength and resource of safe operation of nuclear power facilities. Generally accepted approaches of strength physics and fracture mechanics were used to determine strength and service life. The degree of influence of residual stresses on the strength and service life of pipeline elements in the case of a cyclically acting load, under static load, when there is a danger of brittle fracture, and in the case of corrosion is investigated. The objects of the study were pipelines of nuclear power plants. It is noted that the current state of science and technology has made it possible to create a technique for non-destructive testing of mechanical stresses acting in metal structures based on the use of the acoustoelasticity method. Currently, on the basis of this method, a method for measuring residual welding and installation stresses in pipelines has been developed and certified for use in the field of atomic energy use. The measurement technique provides for the determination of membrane and bending stresses in annular sections located on rectilinear sections of pipelines. The values of stresses in the structural elements of pipelines and residual welding stresses in the deposited metal of welded joints are determined using ratios based on the use of the balancing principle. The relevance of introducing into the procedure for monitoring the technical condition of pipelines and equipment of nuclear power plants the procedure for determining the actual level of residual stresses, which significantly increases the reliability of the assessment of their strength and service life, is shown. It is proved that in order to implement the procedure for determining the actual level of residual stresses, it is necessary to use a non-destructive testing system for residual welding and installation stresses using the acoustoelasticity method based on a measurement technique that allows determining the actual values of residual stresses with established error characteristics.

Detergent-induced quantitatively limited formation of diacyl phosphatidylinositol dimannoside in Mycobacterium smegmatis

Mycobacterial plasma membrane, together with the peptidoglycan-arabinogalactan cell wall and waxy outer membrane, creates a robust permeability barrier against xenobiotics. The fact that several antituberculosis drugs target plasma membrane-embedded enzymes underscores the importance of the plasma membrane in bacterial physiology and pathogenesis. Nevertheless, its accurate phospholipid composition remains undefined, with conflicting reports on the abundance of phosphatidylinositol mannosides (PIMs), physiologically important glycolipids evolutionarily conserved among mycobacteria and related bacteria. Some studies indicate cardiolipin, phosphatidylethanolamine, and phosphatidylinositol as dominant structural phospholipids. Conversely, some suggest PIMs dominate the plasma membrane. A striking example of the latter is the use of reverse micelle extraction, showing diacyl phosphatidylinositol dimannoside (Ac2PIM2) as the most abundant phospholipid in a model organism, Mycobacterium smegmatis. Our recent work reveals a rapid response mechanism to membrane-fluidizing stress in mycobacterial plasma membrane: monoacyl phosphatidylinositol dimannoside and hexamannoside (AcPIM2 and AcPIM6) are converted to diacyl forms (Ac2PIM2 and Ac2PIM6). Given the dynamic nature of PIMs, we aimed to resolve the conflicting data in the literature. We show that unstressed M. smegmatis lacks an Ac2PIM2-dominated plasma membrane. Ac2PIM2 accumulation is induced by experimental conditions involving sodium docusate, a component of the reverse micellar solution. Using chemically synthesized PIMs as standards, we accurately quantified phospholipid ratio in M. smegmatis through liquid chromatography-mass spectrometry, revealing that mycobacterial plasma membrane is dominated by cardiolipin, phosphatidylethanolamine, and phosphatidylinositol. PIMs are quantitatively minor but responsive to environmental stresses in M. smegmatis. Our study paves the way for accurate modeling of mycobacterial plasma membrane.

LiaX is a surrogate marker for cell envelope stress and daptomycin non-susceptibility in Enterococcus faecium.

Daptomycin (DAP) is often used as a first-line therapy to treat vancomycin-resistant Enterococcus faecium infections, but emergence of DAP non-susceptibility threatens the effectiveness of this antibiotic. Moreover, current methods to determine DAP minimum inhibitory concentrations (MICs) have poor reproducibility and accuracy. In enterococci, DAP resistance is mediated by the LiaFSR cell membrane stress response system, and deletion of liaR encoding the response regulator results in hypersusceptibility to DAP and antimicrobial peptides. The main genes regulated by LiaR are a cluster of three genes, designated liaXYZ. In Enterococcus faecalis, LiaX is surface-exposed with a C-terminus that functions as a negative regulator of cell membrane remodeling and an N-terminal domain that is released to the extracellular medium where it binds DAP. Thus, in E. faecalis, LiaX functions as a sentinel molecule recognizing DAP and controlling the cell membrane response, but less is known about LiaX in E. faecium. Here, we found that liaX is essential in E. faecium with an activated LiaFSR system. Unlike E. faecalis, E. faecium LiaX is not detected in the extracellular milieu and does not appear to alter phospholipid architecture. We further postulated that LiaX could be used as a surrogate marker for cell envelope activation and non-susceptibility to DAP. For this purpose, we developed and optimized a LiaX enzyme-linked immunosorbent assay (ELISA). We then assessed 86 clinical E. faecium bloodstream isolates for DAP MICs and used whole genome sequencing to assess for substitutions in LiaX. All DAP-resistant clinical strains of E. faecium exhibited elevated LiaX levels. Strikingly, 73% of DAP-susceptible isolates by standard MIC determination also had elevated LiaX ELISAs compared to a well-characterized DAP-susceptible strain. Phylogenetic analyses of predicted amino acid substitutions showed 12 different variants of LiaX without a specific association with DAP MIC or LiaX ELISA values. Our findings also suggest that many E. faecium isolates that test DAP susceptible by standard MIC determination are likely to have an activated cell stress response that may predispose to DAP failure. As LiaX appears to be essential for the cell envelope response to DAP, its detection could prove useful to improve the accuracy of susceptibility testing by anticipating therapeutic failure.

A closed-form structural stress-strain relation and implications on plastic design limits in codes and standards

The deformation of elastic-perfectly plastic beam or plate under combined through-thickness membrane and bending stresses (i.e., structural stress) is analyzed in this paper. Closed-form solutions of “plane-remains-plane” strain (i.e., structural strain) distribution as a function of applied stress and yield strength is derived. The relationship between structural stress and structural strain is also revealed for gaining insights on not only the plastic collapse conditions, but also through-thickness deformation behaviors leading to limit state. Based on the closed-form strain solutions, four deformation modes are identified: (1) elastic, (2) one-side yielding, (3) two-side yielding, and (4) plastic collapse. A membrane-bending stress interaction diagram is constructed to depict four zones that are associated with the four deformation modes in the normalized membrane and bending stress space. Closed-form solutions of residual stress, residual strain, and structural stress range-strain range relation after a loading-unloading cycle are also derived. Based on the parabolic plastic collapse stress limit curve, parabolic design stress limit curves with coherent safety margins for any combinations of membrane and bending stresses are constructed. The new insights gained in this study offer a more consistent definition of design stress limit than those used in the current codes and standards, e.g., ASME BP&V Code.

Simulations of Functional Motions of Super Large Biomolecules with a Mixed-Resolution Model.

Many large protein machines function through an interplay between large-scale movements and intricate conformational changes. Understanding functional motions of these proteins through simulations becomes challenging for both all-atom and coarse-grained (CG) modeling techniques because neither approach alone can readily capture the full details of these motions. In this study, we develop a multiscale model by employing the popular MARTINI CG model to represent a heterogeneous environment and structurally stable proteins and using the united-atom (UA) model PACE to describe proteins undergoing subtle conformational changes. PACE was previously developed to be compatible with the MARTINI solvent and membrane. Here, we couple the protein descriptions of the two models by directly mixing UA and CG interaction parameters to greatly simplify parameter determination. Through extensive validations with diverse protein systems in solution or membrane, we demonstrate that only additional parameter rescaling is needed to enable the resulting model to recover the stability of native structures of proteins under mixed representation. Moreover, we identify the optimal scaling factors that can be applied to various protein systems, rendering the model potentially transferable. To further demonstrate its applicability for realistic systems, we apply the model to a mechanosensitive ion channel Piezo1 that has peripheral arms for sensing membrane tension and a central pore for ion conductance. The model can reproduce the coupling between Piezo1's large-scale arm movement and subtle pore opening in response to membrane stress while consuming much less computational costs than all-atom models. Therefore, our model shows promise for studying functional motions of large protein machines.

Genetic synergy between Acinetobacter baumannii undecaprenyl phosphate biosynthesis and the Mla system impacts cell envelope and antimicrobial resistance.

Acinetobacter baumannii is a Gram-negative bacterial pathogen that poses a major health concern due to increasing multidrug resistance. The Gram-negative cell envelope is a key barrier to antimicrobial entry and includes an inner and outer membrane. The maintenance of lipid asymmetry (Mla) system is the main homeostatic mechanism by which Gram-negative bacteria maintain outer membrane asymmetry. Loss of the Mla system in A. baumannii results in attenuated virulence and increased susceptibility to membrane stressors and some antibiotics. We recently reported two strain variants of the A. baumannii type strain ATCC 17978: 17978VU and 17978UN. Here, ∆mlaF mutants in the two ATCC 17978 strains display different phenotypes for membrane stress resistance, antibiotic resistance, and pathogenicity in a murine pneumonia model. Although allele differences in obgE were previously reported to synergize with ∆mlaF to affect growth and stringent response, obgE alleles do not affect membrane stress resistance. Instead, a single-nucleotide polymorphism (SNP) in the essential gene encoding undecaprenyl pyrophosphate (Und-PP) synthase, uppS, results in decreased enzymatic rate and decrease in total Und-P levels in 17978UN compared to 17978VU. The UppSUN variant synergizes with ∆mlaF to reduce capsule and lipooligosaccharide (LOS) levels, increase susceptibility to membrane stress and antibiotics, and reduce persistence in a mouse lung infection. Und-P is a lipid glycan carrier required for the biosynthesis of A. baumannii capsule, cell wall, and glycoproteins. These findings uncover synergy between Und-P and the Mla system in maintaining the A. baumannii cell envelope and antibiotic resistance.IMPORTANCEAcinetobacter baumannii is a critical threat to global public health due to its multidrug resistance and persistence in hospital settings. Therefore, novel therapeutic approaches are urgently needed. We report that a defective undecaprenyl pyrophosphate synthase (UppS) paired with a perturbed Mla system leads to synthetically sick cells that are more susceptible to clinically relevant antibiotics and show reduced virulence in a lung infection model. These results suggest that targeting UppS or undecaprenyl species and the Mla system may resensitize A. baumannii to antibiotics in combination therapies. This work uncovers a previously unknown synergistic relationship in cellular envelope homeostasis that could be leveraged for use in combination therapy against A. baumannii.

Structure and ligand binding in the putative anti-microbial peptide transporter protein, YejA.

YejABEF is an ATP-binding cassette transporter that is implicated in the sensitivity of Escherichia coli to anti-microbial peptides, the best-characterized example being microcin C, a peptide-nucleotide antibiotic that targets aspartyl-tRNA synthetase. Here the structure of the extracellular solute binding protein, YejA, has been determined, revealing an oligopeptide-binding protein fold enclosing a ligand-binding pocket larger than those of other peptide-binding proteins of known structure. Prominent electron density in this cavity defines an undecapeptide sequence LGEPRYAFNFN, an observation that is confirmed by mass spectrometry. In the structure, the peptide interactions with the protein are mediated by main chain hydrogen bonds with the exception of Arg5 whose guanidinium side chain makes a set of defining polar interactions with four YejA residues. More detailed characterization of purified recombinant YejA, by a combination of ESI and MALDI-mass spectrometry as well as thermal shift assays, reveals a set of YejA complexes containing overlapping peptides 10-19 residues in length. All contain the sequence LGEPRYAFN. Curiously, these peptides correspond to residues 8-26 of the mature YejA protein, which belong to a unique N-terminal extension that distinguishes YejA from other cluster C oligopeptide binding proteins of known structure. This 35-residue extension is well-ordered and packs across the surface of the protein. The undecapeptide ligand occupies only a fraction of the enclosed pocket volume suggesting the possibility that much larger peptides or peptide conjugates could be accommodated, though thermal shift assays of YejA binding to antimicrobial peptides and peptides unrelated to LGEPRYAFNFN have not provided evidence of binding. While the physiological significance of this 'auto-binding' is not clear, the experimental data suggest that it is not an artefact of the crystallization process and that it may have a function in the sensing of periplasmic or membrane stress.

Histologic Evidence of Epithelial–Mesenchymal Transition and Autophagy in Human Fetal Membranes

Preterm, prelabor rupture of the human fetal membranes (pPROM) is involved in 40% of spontaneous preterm births worldwide. Cellular-level disturbances and inflammation are effectors of membrane degradation, weakening, and rupture. Maternal risk factors induce oxidative stress (OS), senescence, and senescence-associated inflammation of the fetal membranes as reported mechanisms related to pPROM. Inflammation can also arise in fetal membrane cells (amnion/chorion) due to OS-induced autophagy and epithelial-mesenchymal transition (EMT). Autophagy, EMT, and their correlation in pPROM, along with OS-induced autophagy-related changes in amnion and chorion cells invitro, were investigated. Immunocytochemistry staining of cytokeratin-18 (epithelial marker)/vimentin (mesenchymal marker) and proautophagy-inducing factor LC3B were performed in fetal membranes from pPROM, term not in labor, and term labor. Ultrastructural changes associated with autophagy were verified by transmission electron microscopy of the fetal membranes and in cells exposed to cigarette smoke extract (an OS inducer). EMT and LC3B staining was compared in the chorion from pPROM versus term not in labor. Transmission electron microscopy confirmed autophagosome formation in pPROM amnion and chorion. In cell culture, autophagosomes were formed in the amnion with OS treatment, while autophagosomes were accumulated in both cell types with autophagy inhibition. This study documents the association between pPROMs and amniochorion autophagy and EMT, and supports a role for OS in inducing dysfunctional cells that increase inflammation, predisposing membranes to rupture.

An enriched virtual element method for 2D‐3C generalized membrane shell model on surface

AbstractDealing with complex shell surfaces using the finite element method, we are often limited to simple geometric meshes such as triangles and quadrangles and have to refine the meshes to meet the calculation accuracy requirements, significantly increasing the calculation cost. The virtual element method (VEM), a new numerical method with high mesh flexibility, has been widely applied to many physical and mechanical problems. To the best of our knowledge, this method has yet to be studied for membrane shell models so far. In this paper, for the first time, we provide an enriched conforming VEM discrete scheme for the two‐dimensional three‐component (2D‐3C) generalized membrane shell (GMS) model proposed by Ciarlet et al. Furthermore, we prove the VEM discrete solution's existence and uniqueness for the GMS. Numerical experiments demonstrate that this discrete scheme is convergent and stable and can accurately represent the membrane stress state of conical, cylindrical, hyperbolical, and spherical shells clamped along a portion of their lateral faces. At the same time, we show the diversity of the grid subdivision. Thus, we develop the VEM for the GMS model successfully. In the future, we will continue to study the VEM for other shell models.

Evaluation of Cryopreserved Ram Sperm with Nano-Ozone Solution and Post-Thaw Life Span by Flow Cytometric Analysis.

Ozone has been used as a therapy tool in medical science for conditions such as ulcers, peritonitis, wounds, and mostly joint problems. Ozone therapy strengthens the resistance to infections by kick-starting antioxidant, anti-inflammatory, and immune modulation systems. Ozone creates a defensive response against oxidative stress in membranes and protects metabolism against reactive oxygen species (ROS). Sperm membranes are one of ROS's main targets; therefore, the cells' cryopreservation process requires more defensive elements for better results. This study aimed to investigate the protective effect of nano-ozone solution (NOS) on ram sperm cryopreservation and the influence of the process on various sperm parameters for post-thaw (0 hour) and postincubation (6 hours) time points. Samples were collected from six Merino rams in the breeding season by electroejaculation five times at 3-day intervals. The study was conducted by cryopreservation of the samples using a tris citric acid-egg yolk-based extender. The samples were subjected to freezing in control and NOS (0.5, 1, and 2 μg/mL nano-ozone supplemented). Post-thaw motility, hypo-osmotic swelling test, acrosome (fluorescein isothiocyanate-conjugated Pisum sativum agglutinin [PSA-FITC]), and DNA integrities (terminal deoxynucleotidyl transferase dUTP nick end labeling [TUNEL]) were evaluated with a phase-contrast microscope. Mitochondrial membrane potential (MMP) assessments were conducted by JC1-PI dual staining with a flow cytometer. Malondialdehyde and glutathione (GSH) levels were measured by a spectrophotometer. Sperm kinematics were investigated by a computer-assisted sperm analyzer (CASA) at the post-thaw time point. Compared with the control, relatively low doses of NOS (0.5 and 1 μg/mL) yielded better results in many parameters (motility, membrane and acrosomal integrities, MMP, various sperm kinematics, and GSH levels) (p < 0.05). The addition of low ozone doses to cryopreservation extenders improved the results compared with the control group at post-thaw and postincubation time points. Despite the valuable potential of nano-ozone supplementation in ram sperm cryopreservation, this subject requires further investigations with fertility trials soon.

Emergence of periodic circumferential actin cables from the anisotropic fusion of actin nanoclusters during tubulogenesis

The periodic circumferential cytoskeleton supports various tubular tissues. Radial expansion of the tube lumen causes anisotropic tensile stress, which can be exploited as a geometric cue. However, the molecular machinery linking anisotropy to robust circumferential patterning is poorly understood. Here, we aim to reveal the emergent process of circumferential actin cable formation in a Drosophila tracheal tube. During luminal expansion, sporadic actin nanoclusters emerge and exhibit circumferentially biased motion and fusion. RNAi screening reveals the formin family protein, DAAM, as an essential component responding to tissue anisotropy, and non-muscle myosin II as a component required for nanocluster fusion. An agent-based model simulation suggests that crosslinkers play a crucial role in nanocluster formation and cluster-to-cable transition occurs in response to mechanical anisotropy. Altogether, we propose that an actin nanocluster is an organizational unit that responds to stress in the cortical membrane and builds a higher-order cable structure.

Elastic Contractile Stress in the Basement Membrane Generates Basal Tension in Epithelia

The shaping of epithelial tissues into functional organs often depends on dynamic changes of mechanical tension at the apical and basal sides of cells. While on the apical side, tension is known to be regulated by the apical actomyosin meshwork, basal tension regulation remains elusive due to the presence of a basal sheet of specialized extracellular matrix, the basement membrane. Here, we use atomic force microscopy to provide direct measurements of mechanical tension in the basal surface of the wing disk epithelium of in control and perturbed conditions. We find that next to actomyosin, the basement membrane is a key structure for the generation of basal tension. Furthermore, we show that the basement membrane is a solidlike sheet subject to an expansile stretch in epithelial homeostasis. Performing osmotic shocks and optogenetic actomyosin activation, we find evidence that basal stretch and tension can be generated by intracellular hydrostatic pressure and actomyosin tension in lateral cell faces of the epithelium. In conclusion, we propose that elastic contractile stress corresponding to the actomyosin-induced expansile stretch of the basement membrane generates a major contribution to basal tension. We thereby disclose fundamental differences in the mechanical regulation of apical and basal epithelial tension. Published by the American Physical Society 2024

Exploring the Biocontrol Capability of Non-Mycotoxigenic Strains of Penicillium expansum.

Penicillium expansum is one the major postharvest pathogens of pome fruit during postharvest handling and storage. This fungus also produces patulin, which is a highly toxic mycotoxin that can contaminate infected fruits and their derived products and whose levels are regulated in many countries. In this study, we investigated the biocontrol potential of non-mycotoxigenic strains of Penicillium expansum against a mycotoxigenic strain. We analyzed the competitive behavior of two knockout mutants that were unable to produce patulin. The first mutant (∆patK) involved the deletion of the patK gene, which is the initial gene in patulin biosynthesis. The second mutant (∆veA) involved the deletion of veA, which is a global regulator of primary and secondary metabolism. At the phenotypic level, the ∆patK mutant exhibited similar phenotypic characteristics to the wild-type strain. In contrast, the ∆veA mutant displayed altered growth characteristics compared with the wild type, including reduced conidiation and abnormal conidiophores. Neither mutant produced patulin under the tested conditions. Under various stress conditions, the ∆veA mutants exhibited reduced growth and conidiation when exposed to stressors, including cell membrane stress, oxidative stress, osmotic stress, and different pH values. However, no significant changes were observed in the ∆patK mutant. In competitive growth experiments, the presence of non-mycotoxigenic strains reduced the population of the wild-type strain during in vitro growth. Furthermore, the addition of either of the non-mycotoxigenic strains resulted in a significant decrease in patulin levels. Overall, our results suggest the potential use of non-mycotoxigenic mutants, particularly ∆patK mutants, as biocontrol agents to reduce patulin contamination in food and feed.

Interference effects on the wind loads and wind-induced responses of parallel-arranged rectangular-planed air-supported membrane structures

In many practical projects, two air-supported membrane structures are parallel-arranged. The interference effects of parallel-arranged rectangular-planed air-supported membrane structures are important in the wind-resistant design. In order to address this issue, the wind pressures on isolated and parallel-arranged structures are obtained through pressure measurement wind tunnel tests. The wind-induced responses are calculated via nonlinear dynamic time–history analysis. Consequently, the interference effects on wind loads and wind-induced responses are analyzed. The results show that the wind suctions of downstream structures are amplified by the interferences of parallel-arranged structures particularly under oblique wind directions. The mean wind loads on the most disturbed zone are amplified up to about 65 %. The interference characteristics of wind-induced displacement are basically similar to mean wind loads. The membrane stresses and cable forces are significantly interfered only in oblique wind directions, which are amplified up to about 15 % in all zones of downstream structures. The strongest interference effects can be observed with a spacing-span ratio of 0.2 when the wind direction is oblique or parallel to the gap between neighboring structures. The interference factors for zones are provided to analyze the interference characteristics. In addition, recommendation values of the overall response interference factors are summarized for design reference. The overall response interference factors for displacement, membrane stress, and cable force should be considered as 1.21, 1.33, and 1.20, respectively.