Stress Distribution Research Articles

Medial meniscal posterior root tear – A current concept review

Menisci are crucial structures in the knee joint for the adequate distribution of hoop stresses. Their significance in preventing early knee osteoarthritis has been acknowledged due to the rapid progression of osteoarthritis in knees following meniscectomy. The anatomy of menisci has been studied in detail with an increased understanding of the importance of meniscal root attachments. This review aims to provide an evaluated summary of the anatomical, biochemical, and functional aspects that are relevant in the clinical context of meniscus root attachments, alongside contemporary strategies for accurately diagnosing and treating common injuries affecting these attachments. We also propose an algorithm for managing medial meniscus root tears which may be beneficial for the readers. We did an up-to-date literature search on PubMed, Scopus, and Google Scholar database, using the keywords ‘meniscus’, ‘meniscal root’, ‘sports injury’, and ‘arthroscopy’ in April 2024 and filtered out the relevant literature for this review on the articles that were published in English. The management of root tears requires a high level of suspicion which is crucial for diagnosis, identifying subtle signs on radiology, and employing specific methods for root repair. The tears or avulsions within one centimeter of the tibial attachment of the medial meniscus posterior root are called medial meniscus posterior root tears. These injuries cause a functional meniscal deficiency, resulting in knee problems unfavorable to biomechanics. Numerous methods have been created to tackle meniscus root tears., with many demonstrating promising outcomes in terms of complete healing.

Characteristics of Deterministic and Stochastic Unsteadiness of Trailing Edge Cutback Film Cooling Flows

Abstract Trailing edge cutback film cooling flows are ubiquitous in small and medium gas turbines, but they are difficult to predict accurately due to the inherent deterministic and stochastic unsteadiness that controls the effectiveness of the cooling system. To help develop accurate closure models for such flows, the characteristics of both types of unsteadiness and their effects on the mean flows are analyzed in this research. Zonal detached eddy simulation (ZDES) is performed on a trailing edge cutback flow model, and the numerical results are validated against the measured data. Then, by using spectral proper orthogonal decomposition (SPOD) reconstruction, the original dataset is segregated into deterministic and stochastic unsteadiness. The characteristics of the stress tensor and the heat flux of each type of unsteadiness are analyzed in detail, and notable differences between the two unsteadiness are identified in terms of the stress tensor anisotropy and distribution of unsteady kinetic energy and heat flux. By propagating the unsteadiness through the Reynolds-averaged Navier–Stokes (RANS) equations, the effect of different unsteadiness on the mean flow prediction is quantified. An accurate prediction of the total stress tensor reduces the prediction error in the velocity field by 79% and cooling effectiveness by 55%. An accurate prediction of the total heat flux vector reduces the prediction error in cooling effectiveness further by 37%. These findings provide valuable knowledge for the physical understanding, turbulence modeling, and aerothermal design of cutback trailing edge flows.

Stress field measurements using quantitative schlieren

Quantitative schlieren analysis is extended here to optically transparent solids in quasi-static and dynamic experiments to measure stress distributions. The quasi-static experiments in polymethyl methacrylate (PMMA) compared refraction angles and stress gradients calculated from schlieren images to the analytical Flamant solution of a line load on a half-space. The quantitative schlieren measurements of the stress field in the thin sample with a load compared well to the analytical solution. The analysis method was then extended to explosive induced shock waves in PMMA. The explosive induced response of PMMA was experimentally studied using high-speed schlieren to visualize the shock propagation in conjunction with Photon Doppler Velocimetry (PDV) to record surface velocity histories. The stress state estimated from the schlieren images was compared to the stress calculated from the PDV measurements. High-speed imaging limitations caused the shock wave to not be fully resolved in the images, but was resolved in the PDV measurement. The stress state behind the shock calculated from the high-speed images followed a similar trend to the stress calculated from the PDV measurements.

Probing fretting wear behavior of gauge-changeable spline axle under rotational bending loads

The latest generation of gauge-changeable trains in China feature designs with their wheels and axles connected by spline couples and cylindrical fits. In comparison to the interference fitted wheelset, the spline axle with clearance fit is more prone to fretting damage. In this study, the stress distribution of spline axle was analyzed using finite element method. Then, a rotatory bending test on scaled wheel/axle samples was conducted to reveal the fretting wear behavior of the gauge-changeable axle. During traction, the contact stress of the spline peaks at 311 MPa on the tooth’s root side, with a corresponding relative slip of 14 μm. Fretting wear is observed in the spline axle, the damage zone of the wheel seat can be categorized into five bands (A–E), and severely damaged areas are covered with red-brown debris. Moreover, the main damage mechanism of untreated spline axle and surface-modified spline axle is delamination accompanied with oxidation. The improved properties of plasma nitriding and grease lubricant are attributed to the high surface hardness and residual compressive stress, as well as low frictional stress.

A Comparative Study on the Effects of Biodegradable High-Purity Magnesium Screw and Polymer Screw for Fixation in Epiphyseal Trabecular Bone

Abstract With mechanical strength close to cortical bone, biodegradable, and osteopromotive properties, magnesium (Mg)-based implants are promising biomaterials for orthopedic applications. However, during the degradation of such implants, there are still concerns on the potential adverse effects such as formation of cavities, osteolytic phenomena, and chronic inflammation. Therefore, to transform Mg-based implants into clinical practice, the present study evaluated the local effects of high-purity Mg screws (HP-Mg, 99.99 wt%) by comparing with clinically approved polylactic acid (PLA) screws in epiphyseal trabecular bone of rabbits. After implantation of screws at the rabbit distal femur, bone microstructural, histomorphometric, and biomechanical properties were measured at various time points (week 4, 8, and 16) using micro-CT, histology and histomorphometry, micro-indentation, and scanning electron microscope (SEM). High-purity Mg screws promoted peri-implant bone ingrowth with higher bone mass (BV/TV at week 4: 0.189 ± 0.022 in PLA group versus 0.313 ± 0.053 in Mg group), higher biomechanical properties (hardness at week 4: 35.045 ± 1.000 HV in PLA group versus 51.975 ± 2.565 HV in Mg group), more mature osteocyte LCN architecture, accelerated bone remodeling process, and alleviated inflammatory response (IRS score of Ram11 at week 4: 5.8 ± 0.712 in PLA group versus 3.75 ± 0.866 in Mg group) as compared to PLA screws. Furthermore, we conducted finite element analysis (FEA) to validate the superiority of high-purity Mg screws as orthopedic implants by demonstrating reduced stress concentration and uniform stress distribution around the bone tunnel, which led to lower risks of trabecular microfractures. In conclusion, high-purity Mg screws demonstrated greater osteogenic bioactivity and limited inflammatory response compared to PLA screws in the epiphyseal trabecular bone of rabbits. Our findings have paved a promising way for the clinical application of Mg-based implants.

Accurate modeling and safety evaluation of dented pipeline with internal pressure based on reverse modeling technique

ABSTRACT As a common form for pipeline geometric defects, dents can induce the local stress concentration of the pipeline, which would result in the debilitation of the bearing capacity and bring huge safety hazards. In this paper, the accurate surface profiles of dented pipeline are acquired based on the 3D scanning technology and deformation detection technology, respectively. Then, the dented pipeline models are constructed by the reverse modeling technique, and the stress distribution characteristics of the dented pipeline in the operation condition are simulated using ABAQUS. The maximum von Mises stresses of a dented pipeline obtained from two proposed modeling techniques are basically consistent. However, the deformation detection technology can effectively avoid the excavation work for buried pipelines. Therefore, the reverse modeling technique based on the deformation detection technology has strong feasibility in practical projects and significant application value in the safety assessment of submarine pipelines, where excavation work is impractical.

Biomechanical model of minimally invasive hallux valgus surgery

Hallux valgus is a common foot deformity characterized by outward tilting and twisting of the big toe, often accompanied by a medial prominence at the base. Minimally invasive surgical techniques are widely utilized for treating metatarsus adductus due to their advantages of smaller incisions, faster recovery, and early weight-bearing. However, due to individual variations and limited sample size, the biomechanical effects of different Kirschner wire fixation methods and the underlying mechanisms of postoperative metatarsalgia remain unclear. In this study, a finite element method was employed to develop a biomechanical model of metatarsus adductus. The influence of various Kirschner wire entry points and angles on foot loading characteristics was investigated. Six different Kirschner wire fixation models, including two entry methods (along the adjacent fracture line and proximal-biased entry at the midshaft of the metatarsal) with different entry angles, were analyzed. Mechanical parameters such as metatarsal stress distribution, plantar pressure distribution, and displacement of the first metatarsal osteotomy plane were assessed. This research aims to enhance understanding of minimally invasive surgery and its fixation methods for metatarsus adductus. By providing scientific support and reliable evidence, it seeks to contribute to the development of minimally invasive surgical techniques and the improvement of clinical practice in metatarsus adductus surgery. Ultimately, the goal is to reduce complications, increase surgical success rates, and enhance patient satisfaction.

How Does the Stress in the Fixation Device Change during Different Stages of Bone Healing in the Treatment of Fractures? A Finite Element Study of External Fixation for Tibial Fractures.

Although the specific relationship between the stress changes in the external fixator during tibial fracture treatment and the bone healing process remains unclear, it is believed that stress variations in the external fixator scaffold can, to a certain extent, reflect the progress of tibial healing. This study aims to propose a non-invasive method for assessing the degree of fracture healing by monitoring the changes in stress transmission, the locations of stress-sensitive points, and displacement in the external fixator-tibia system during the healing process of tibial fractures. In this study, finite element models of tibial fractures at various healing stages were developed. Physiological conditions, including axial, torsional, and bending loads on the tibia, were simulated to evaluate stress and strain within the external scaffold-tibia system under normal physiological loading conditions. The results indicate variations in the stress distribution between the external fixator and the tibia during different stages of healing. In the early phase of fracture healing, the external fixator plays a crucial role as the primary load-bearing unit under all three loading conditions. As the fracture healing progresses, the stress on the tibia gradually increases, concentrating on the medial part of the tibia under axial and torsional loading, and at the upper and lower ends, as well as the central part of the anterior and posterior tibia during bending loading. The stress at the callus gradually increases, while micro-movements decrease. The stress within the external bracket gradually decreases, with a tendency for the connecting rod to transfer stress towards the screws. Throughout the fracture healing process, the location of maximum stress in the external fixator remains unchanged. Under axial and torsional loading, the maximum stress is located at the intersection of the lowest screw and the bone cortex, while under bending loading, it is at the intersection of the second screw and the connecting rod. During the bone healing process, stress is transferred between the external fixation frame and the bone. As bone healing advances, the stress on the connecting rods and screws of the external fixation frame decreases, and the amplitude of stress changes diminishes. When complete and robust fusion is achieved, stress variations stabilize, and the location of maximum stress on the external fixation frame remains unchanged. The intersections of the lowest screw and the bone cortex, as well as the second screw and the connecting rod, can serve as sensitive points for monitoring the degree of bone healing.

Prediction and Application of Drilling-Induced Fracture Occurrences under Different Stress Regimes

Identifying and categorizing drilling-induced fractures is pivotal for understanding the mechanisms underlying wellbore instability, drilling fluid loss, and assessing reservoirs using imaging logging data. This study employs a linear elastic stress model around the wellbore, coupled with a tensile failure criterion, to establish a predictive framework for the orientation of drilling-induced fractures. It investigates how engineering parameters like wellbore trajectory and bottomhole pressure influence the distribution of principal stresses around the wellbore, as well as the angle and orientation of drilling-induced fractures relative to the wellbore axis, across various faulting scenarios. The results indicate that drilling-induced fractures exhibit structured arrangements and consistent patterns, often appearing at approximately 180° symmetric intervals and descending in similar orientations. This provides a theoretical basis for their systematic identification and classification. Under different stress conditions, these fractures can manifest as feather-like shapes, “J”-shaped, or transitional states between feather-like and “J”-shaped orientations, as well as “V”-shaped or “M”-shaped orientations. Accurate detection and classification of these fractures are essential for interpreting effective fractures, conducting thorough reservoir evaluations, and predicting appropriate drilling fluid densities to mitigate the wellbore failure risk. Moreover, this knowledge aids in effectively determining the magnitude and direction of in situ stress inversion.

Unnoticed antimicrobial resistance risk in Tibetan cities unveiled by sewage metagenomic surveillance: Compared to the eastern Chinese cities

Sewage surveillance is a cost-effective tool for assessing antimicrobial resistance (AMR) in urban populations. However, research on sewage AMR in remote areas is still limited. Here, we used shotgun metagenomic sequencing to profile antibiotic resistance genes (ARGs) and ARG-carrying pathogens (APs) across 15 cities in Tibetan Plateau (TP) and the major cities in eastern China. Notable regional disparities in sewage ARG composition were found, with a significantly higher ARG abundance in TP (2.97 copies/cell). A total of 542 and 545 APs were identified in sewage from TP and the East, respectively, while more than 40 % carried mobile genetic elements (MGEs). Moreover, 65 MGEs-carrying APs were identified as World Health Organization (WHO) priority-like bacterial and fungal pathogens. Notably, a fungal zoonotic pathogen, Enterocytozoon bieneusi, was found for the first time to carry a nitroimidazole resistance gene (nimJ). Although distinct in AP compositions, the relative abundances of APs were comparable in these two regions. Furthermore, sewage in TP was found to be comparable to the cities in eastern China in terms of ARG mobility and AMR risks. These findings provide insights into ARGs and APs distribution in Chinese sewage and stress the importance of AMR surveillance and management strategies in remote regions.

Behavior of CFRP-strengthened short spiral welded tubes under axial load

Spiral welded tubes (SWTs) are formed by rolling steel plates at a certain angle and welding the resulting abutting edges. They are extensively utilized because of their large diameter ranges, high production efficiency, and low production cost. Thin-walled spiral welded tubes with large diameter-to-thickness ratios are susceptible to local buckling under compressive load, and their performance can be affected by corrosive environments. Therefore, this paper proposed the use of carbon fiber-reinforced polymer (CFRP) to strengthen tubes by external bonding. There are limited studies on the axial compression behavior of CFRP strengthened spiral welded tubes, particularly studies that consider the initial imperfections and residual stresses in spiral welded tubes. To bridge this gap, this paper first investigated the distributions of initial imperfections and residual stresses in spiral welded tubes, finding that both are significantly influenced by distinct forming and welding manufacturing processes. Subsequently, axial compression tests were carried out on four unstrengthened specimens and twelve CFRP-reinforced specimens to investigate the compressive behavior by considering the diameter-to-thickness ratio, the length of the steel tubes, and CFRP layer orientation. The experimental results indicate that CFRP strengthening delays local buckling, and significantly enhances the yield load, ultimate load, and initial stiffness of spiral welded tubes, achieving a maximum increase of the yield load up to 69.11 % and the ultimate load up to 61.99 %, while its impact on the ductility index remains uncertain and is influenced by variables such as the diameter-to-thickness ratio of the tubes and the CFRP layer orientation. Finally, a comparison of the ultimate loads of the specimens by tests and design codes was conducted.

Biomechanical difference analysis of new and classic intramedullary nail devices in the treatment of basal femoral neck fractures: finite element analysis

ObjectiveThere is currently a lack of in-depth comparative evaluation regarding the biomechanical properties of novel intramedullary nail devices in the treatment of basal femoral neck fractures (BFNF). This study aims to utilize finite element analysis to compare the performance differences of two novel devices with traditional PFNA and InterTan nails in the fixation of BFNF.MethodsBased on a validated finite element model, this study constructed an accurate BFNF model and implanted four different intramedullary nail devices: PFNA, InterTan nail, PFBN (proximal femoral biomimetic nail), and NIS (novel intramedullary system). Under a vertical load of 2100N, the displacement and Von Mises stress (VMS) distribution of each group of models were evaluated through simulation testing.ResultsUnder a load of 2100N, the PFBN device exhibited the best performance in terms of displacement and peak stress, while PFNA performed poorly. The peak displacement of the NIS device was lower than that of PFNA and InterTan nails, while the peak stress of the InterTan nail was lower than that of PFNA and NIS.ConclusionThe PFBN device demonstrates stronger load-bearing and shear-resistant properties in the treatment of BFNF, and the NIS device also shows significant improvement in stability. Therefore, both the PFBN and NIS devices are reliable internal fixation techniques for the treatment of CFIFs, with potential clinical application prospects.

Influence of surface texturing and coatings on mechanical properties and integration with bone tissue: an in silico study.

This investigation delves into the mechanical behaviour of titanium dental implants, a preferred choice for tooth replacement due to their superior reliability over alternative materials. The phenomenon of implant loosening, frequently induced by masticatory activities, underscores the significance of surface modification or texturing to bolster the interaction between the implant and bone tissue. This research comprehensively examines the effects of four distinct surface texturing techniques and five varied bone quality conditions on the biomechanical performance of these implants. The scope of this study is delineated by its focus on implants of diameters 4mm and 6mm, with lengths measuring 9mm and 12mm respectively. Furthermore, the analysis incorporates the evaluation of four different coatings-hydroxyapatite, HA3TO, HA3Sr, and HA1.5TO1.5Sr-to investigate their efficacy in enhancing the osseointegration process on textured surfaces of dental implants. The experimental design entails the assessment of stress distribution within the implant and its coatings, alongside the strain exerted on the surrounding cancellous bone, under the conditions of an average vertical biting force. A comparative analysis between solid implants and those subjected to surface texturing techniques has been conducted. This comparison elucidates the advantageous microstrain profiles presented by certain textured surfaces, which are deemed more conducive to optimal osseointegration. Notably, across all examined textures, the application of hydroxyapatite (HA) and a modified HA composition (HA1.5TO1.5Sr) demonstrates significant improvements in mechanical stability, particularly in scenarios involving weak and very weak bone conditions. This study's findings contribute to the ongoing advancement in dental implant technology, emphasizing the critical role of surface texturing and coating strategies in promoting implant longevity and integration within the biomechanical environment of the human oral cavity.

Dynamic Response and Rock Damage of Different Shapes of Cavities under Blasting Loads

In order to investigate the dynamic response and rock mass damage characteristics of cavities with different shapes under blasting loads, this paper, through a combination of model tests and numerical simulations, studies the stress distribution, strain, failure modes, and blasting fragment size distribution of cavities with different shapes subjected to blasting loads. The results show that under the action of blasting loads, the presence of cavities with different shapes significantly affects the blasting effects and rock mass damage. Spherical cavities exhibit excellent blast resistance, whereas rectangular and triangular cavities are prone to stress concentration at their tips, which in turn promotes rock mass damage and failure. Subsequent analysis of the blasting fragment sizes reveals that rectangular and triangular cavities yield more favorable blasting results than spherical cavities. The research findings provide important theoretical foundations and practical guidance for the design and construction of underground engineering blasting, contributing to enhancing engineering safety and promoting the sustainable development of the underground engineering industry.

Bio-Informed Porous Mineral-Based Composites.

Certain biominerals, such as sea sponges and echinoderm skeletons, display a fascinating combination of mechanical properties and adaptability due to the well-defined structures spanning various length scales. These materials often possess high density normalized mechanical properties because they contain well-defined pores. The density-normalized mechanical properties of synthetic minerals are often inferior because the pores are stochastically distributed, resulting in an inhomogeneous stress distribution. The mechanical properties of synthetic materials are limited by the degree of structural and compositional control currently available fabrication methods offer. In the first part of this review, examples of structural elements nature uses to impart exceptional density normalized Young's moduli to its porous biominerals are showcased. The second part highlights recent advancements in the fabrication of bio-informed mineral-based composites possessing pores with diameters that span a wide range of length scales. The influence of the processing of mineral-based composites on their structures and mechanical properties is summarized. Thereby, it is aimed at encouraging further research directed to the sustainable, energy-efficient fabrication of synthetic lightweight yet stiff mineral-based composites.

Fingers crossed: Biomechanical analysis of partial mandibular implant with various level of material properties by different shapes, sizes, and rod diameter of lattice designs: In-vitro experiment and finite element simulation

For patients with mandibular bone defects, although reconstruction plates can be used for repair, achieving both occlusal function and facial aesthetics is challenging. In the present study, in vitro experiments and finite element analysis (FEA) were conducted to determine the biomechanical characteristics of multiple porous lattice structures of varying shapes and diameters that were used for mandibular implants. Additionally, an abutment designed to carry occlusal forces was added to the tops of the implants. The stress distribution of four lattice designs (Tetrahedron, Quad-diametral-cross, Hex-star, and Hex-vase) of three sizes (2.5, 3.0, and 3.5 mm) in cubic porous models were analysed by FEA. Subsequently, two optimal designs for 3D-printed titanium alloy were selected. These designs, featuring different lattice diameters (0.5, 0.7, and 0.9 mm), were tested to determine their elastic modulus. These elastic modulus were used in another FEA of a mandibular implant designed for a patient with a malignant tumor in the right mandible. This model, which included an abutment design, was subjected to a vertical force of 100 N and muscle forces generated by biting. This analysis was conducted to determine the elastic modulus of the implant and the values of stress and strain on the implant and surrounding bone. The lattice designs of Quad-diametral-cross and Hex-vase exhibited smaller high-stress regions than those of Tetrahedron and Hex-star did. In vitro tests revealed that the elastic modulus of the lattices increased with the rod diameter. When these values were applied in mandibular implants, Young’s modulus decreased, which in turn increased the frictional stress observed at the interface between the abutment and the implant. However, the implant’s maximum stress remained below its yield strength (910 MPa), and the strain on the surrounding bone varied between 1500 and 3000 µstrain. As indicated by Frost’s theory, these implants are unlikely to damage the surrounding bone tissue and are likely to support bone growth. In conclusion, the lattice designs of Quad-diametral-cross and Hex-vase have small high-stress regions for mandibular implants. Increasing the diameter of the lattice rods increases Young’s modulus, which in turn reduces the frictional stress between the abutment and the implant. Even when the highest Young’s modulus is reached, the stress on the implant remains below its yield strength, and the bone strain remains within the range of 1500 to 3000 µstrain.

Experimental and numerical investigation on shear behavior of concrete beams reinforced with CFRP grid shear reinforcements

This research investigated the shear behavior of concrete beams reinforced with Carbon Fiber Reinforced Polymer (CFRP) bars and grids as longitudinal reinforcements and stirrups, in experiment and finite element (FE) methods. Five concrete beams were tested under a monotonical load and experienced shear failure as expected. The test variables including stirrup ratio and grid dimension were considered to investigate the interaction between grid and concrete, and the influence between the horizontal and vertical fibers of the grid. It found that reducing the grid dimension with the constant stirrup ratio could effectively improve the stress distribution of the grid and the shear capacity of the beam. The grid dimension greatly determined the shear capacity of specimens when the stirrup ratio changed in a small range. The horizontal fibers of the grid had anchoring effects on the vertical fibers and directly carried the tensile stress from concrete at the top and bottom of the beam. In FE analysis, the fiber composite layer was adopted to simulate the CFRP grid. The load-midspan deflection of specimens and strain development of the grid in the FE model showed good agreement with the tests. In parameter analysis, the grid configuration with the horizontal fiber arranged in the middle or upper part of the section was recommended.

Evaluation of the biomechanics of Aramany class I obturators of different designs using numerical and experimental methods. Part II: Stress distribution

Evidence regarding stress evaluations of removable obturators with Aramany class I defects is lacking. Whether the stress distribution on Aramany class I prostheses can be improved by modifying the currently used designs is also unclear. The purpose of part II of this study was to evaluate the stress distribution in different designs of Aramany class I obturators using finite element analysis (FEA) and photoelastic stress analysis. Four finite element and 8 photoelastic models, including 2 acrylic resin base obturators retained with 2 Adams clasps, 2 linear, 2 tripodal, and 2 fully tripodal design obturators, were used in this study. The frameworks were fabricated on the casts obtained from a modified printed model. Vertical and oblique loads were applied on 2 points (anterior and posterior) of the models. The quantitative measurement was done by measuring the fringe orders and von Mises values to compare the influences of occlusal forces on the obturator components and their supporting structures. The qualitative evaluation was done by visual color mapping to identify the stress concentration. In the photoelastic analysis, the anterior abutments of the tripodal showed the highest stress, followed by the fully tripodal obturators, while, in FEA, the anterior abutments of the linear design received the most in both vertical and oblique load. The central incisor received the most stress in photoelastic (3 or more fringe orders) and FEA (687.3 and 150.1MPa for vertical and oblique loads, respectively), followed by the lateral incisors. Upon posterior loading, the base of the defect of the linear design demonstrated the most stress in photoelastic (3 or more fringes) and FEA (94.3 and 130.5MPa for vertical and oblique loads, respectively). The acrylic resin base obturator retained with Adams clasps demonstrated the lowest stress distribution in abutments and their supporting bone upon anterior and posterior loads. Upon vertical and oblique load application, the fully tripodal design was comparable with the tripodal in terms of stress distribution. Both designs were better than the linear in response to the same loading. The stress was concentrated at the anterior palatal part of the obturator, the base of the defect, and the junction of the metal and acrylic resin part of the prostheses upon anterior and posterior loading, respectively.

Numerical study of steel beam to reinforce concrete column (RCC) connection with through-plate and buckling-restrained steel plates

This study examines the behavior and failure mechanisms of steel beam-to-reinforced concrete column connections with through-plate and buckling-restrained steel plates (BRSPs) configurations. These connections are critical components in composite steel and concrete structures, playing a vital role in force transfer and resistance to various loads, especially dynamic loads such as earthquakes. The primary objective of this study is to analyze the hysteresis behavior of these connections under cyclic loading using numerical analyses. Parametric models with varying BRSP thicknesses, ranging from 5 to 25 mm, were used to investigate their impact on hysteresis behavior and load-bearing capacity. The effects of different BRSP thicknesses on stress distribution and failure mechanisms were analyzed. The results from the parametric studies show that increasing the thickness of BRSPs improves the stress distribution in the beam-to-column connections. This improvement includes reduced stress concentration and enhanced uniformity of stress distribution, which can lead to reduced localized failures and increased overall connection stability. Numerical simulations indicate that the use of BRSPs (with a thickness of 15 and 17 mm) results in wider and more stable hysteresis loops, reflecting increased energy absorption capacity and improved deformation behavior of the connections under cyclic loading. The findings show that BRSPs can reduce failure concentration, increase flexural resistance, and prevent buckling in steel beams. These results underscore the importance of using BRSPs to enhance structural performance and mitigate potential failures under severe loading conditions.

Mechanical evaluation of human cadaveric lumbar soft tissues suggests possible physiological stress shielding within musculoskeletal soft tissues by the thoracolumbar fascia.

This study investigates the potential for stress shielding within musculoskeletal soft tissues through analysis of stress distributions between lumbar fascial and muscle tissues via mechanical testing. Using a custom apparatus, 51 posterior thoracolumbar fascia (TLF) samples and 18 erector spinae (ES) cadaveric samples underwent tensile testing involving three loading-unloading cycles, followed by loading to 6% strain, to mechanically characterize samples. Parallel tensile testing using 20 pairs of two TLF samples, and seven pairs of TLF and ES samples was then conducted for stress distribution analysis between tissues. P<0.05 was deemed significant. The TLF and ES exhibited an average elastic modulus of 150.9MPa and 0.6MPa, respectively. At 6% strain, parallel testing of the TLF pairs yielded an average tensile stress of 8.4MPa and 1.7MPa (p<0.001) exhibited by the stiffer and less stiff TLF samples, respectively. Similarly, TLF-ES parallel testing resulted in average tensile stresses of 7.1MPa and 0.07MPa of the TLF and ES (p<0.002). Results suggest elevated loading towards stiffer TLF samples relative to less stiff TLF and ES samples. In soft tissues affected by LBP, skewed stress distributions may result in the TLF withstanding the majority of stress, yielding cyclical stress shielding that may contribute to and/or promote LBP. This novel study demonstrates a potential load allocation bias towards the TLF, laying the foundation for stress shielding within lumbar musculoskeletal soft tissues affected by degenerative musculoskeletal conditions.