Street Lighting Control System Research Articles

Development of Wireless Control System for Smart Street Lighting using ESP8266

In this paper, we report a smart street lighting control system using the ESP8266 which is a low-cost Wi-Fi chip with full TCP/IP stack and microcontroller capability. Our system is equipped with a web server developed in HTML code. Hence, our smart street lighting system can be controlled wirelessly to turn ON or turn OFF, and it can be monitored its environmental condition (i.e., temperature and humidity around the system). All sensors used in this system are pure digitally-outputted sensor: DHT11 to monitor the ambient temperature and humidity and BH1750 to adjust the street light intensity automatically. The dimming technique was applied in the control system by using Pulse Width Modulation (PWM). The system was divided into two main parts: Gateway and Node in which these two parts employ the ESP8266. The Gateway as a coordinator will send a message to the node as an end device (in this work, the streetlight act as a Node). Later, the node will send the ACK to the Gateway. As results, each node can send a message to other nodes.

RETRACTED: The location tracking and intelligent street lighting control system based on the RFID and Zigbee for energy efficiency

This paper proposed the novel system which can track the car in the local area based on the RFID and Zigbee technology. This system uses the circuit board developed by ourselves. It combined with the PLC, the wireless communication and the database technology. It has designed to display the dynamical positioning of cars in the map of the area through the website. The tags from RFID system carry the automotive information. Then the information recognized by the reader has been transmitted to the upper computer by the Zigbee module. The website on the upper computer query the vehicle's location from database after mapping the fixed position information sent by the reader into the view of the schematic graph. Because the database has stored the vehicle's location. All the obtained records are used to draw the full path of the car and display the current location of the car. This provides the basis for the scientific navigation. The website of the system has been finished in the Visual Studio platform and the Mysql database technology. And it used the B/S architecture and achieved the vehicle tracking. This system also finishes the dynamic light system and improves the management efficiency for vehicles and can be applied widely.

IOT based Street Lighting Control System

IOT based Street Lighting Control System

Automatic Street Light Control System With and Without Internet of things

Automatic Street Light Control System With and Without Internet of things

POWER SAVER STREET LIGHTING USING MICROCONTROLLER USING ATmega16

Street lights remain illuminated for whole nights and most of them used for lighting-up of highways are high energy consumption lamps. Preservation and sustainable use of energy and resources is an important factor of planning and development these days as Natural resources are depleting day by day, which pose a risk of scarcity and non-availability of the same for our presidenting generations. There is an acute need for devising a well thought out plan to prevent wastage of electricity. Perhaps, the government should think of implementing automatic street light control systems using LDR (light dependent resistor). This review paper illustrates the street light illumination system automated by the movement (frequency) of vehicles on that particular street. The crux of this paper is to emancipate the necessity and usage of street light control systems which combines various technologies is Timers, Photodiodes, Light Emitting Diodes (LED), and IR Sensors.

Development and implementation of smart street lighting system based on LoRa Technology

This paper concerned with the development and implementation of smart street lighting control system based using Led lamp and Lora Wireless communication. Smart street lamps have been developed for over several years. These technologies have played an important role in urban safety, energy conservation. Currently, a traditional street lights are automatically turn on or off based on timer or day/night sensor. LEDs are now the standard replacement for legacy lighting in most cities around the world. At the same time, smart controls are becoming more mainstream and are increasingly installed alongside LED deployments. Recently, the conventional light sources are replaced by Led, which have so many advantages such as: energy savings, long lifetime, high reliability, pure light color, fast response, and friendliness to the environment. Furthermore, the intensity of the LED can be controlled easily. In this paper, the smart lighting system is designed to control and monitor devices via wireless transmission frequencies below 1 GHz. The system will include many types of devices connected to each other by a gateway. The transmit distance is about 2km in the urban area and up to 5km in rural area. The proposed smart street public lighting provides some advantages features such as: Automatic mode, Remote control mode, Connection disconnection mode, Manual direct operation mode. The smart lighting system has been built at Ho Chi Minh City University of Technology to meet the standards for data transmission. And some experimental resutls are provided to show the effectiveness of the porposed system.

Low Cost Automatic Street Light Control System With and Without Relay

modern society entirely depends on electricity for daily life. It has become the key component for modern technology, without electricity most of the equipments which we are using daily will not work at all. Internet is our gateway for knowledge and we also depend on it a lot to get the things which are surrounding us very easily. Under this situation we are not using proper electrical energy in case of street lights. Street lights are perfect solution for night base loads at most of the utility companies during 1930’s were seeking for night timed base loads especially coal based power plants. In India approximately 40 million street lights are there which will generates a total demand of 4000 MW. The cost required to satisfy this demand will also very high. In most of the places maintenance of street lights is very poor. Even though several technologies have used to automatic control of street light but they may turn into several failures because of high cost, improper maintenance, environmental effects on the components or some other major issues. In this paper a low cost maintenance free automatic street light control system is proposed which can be used with relay al well as without relay by using basic electronics components. A small experimental set up has done in laboratory and it can be concluded that the street light automatically turns on and off depends on the darkness of the environment. It can be implemented anywhere irrespective of environmental conditions without any maintenance.

STREET LIGHT GLOWS ON DETECTING THE VEHICLE MOVEMENT USING ARDUINO UNO

vehicle to reduce the wastage of energy. The proposed work is accomplished by using Arduino UNO and sensors that will control the electricity based on night and object's detection. Meanwhile, a counter is set that will count the number of objects passed through the road. The beauty of the proposed work is that the wastage of unused electricity can be reduced. The aim of this project is to design a street light control system using Arduino UNO, which automatically turns on or off the street lights by detecting the movement of vehicles. The working of the project is explained here. When there is not any vehicle in front of the IR sensor module, the receiver can’t get any infrared signal So the circuit remain in open loop condition and the lights are in off condition. When there is any vehicle in front of the IR sensor module, the receiver get the infrared signal. So the circuit is in close loop condition and the lights are in on condition with respect to the IR module. If the car blocks the first IR sensor, the first three LEDs are turned ON by the micro-controller. As the car moves forward and blocks the second IR sensor, the corresponding next three LEDs will be turned ON and the first LED of the previous set is turned OFF. The process continues this way for all the IR Sensors and LEDs.

Design and implementation of street light control system based on power line carrier communication

Traditional street light control systems only support manual control, photosensitive control, and simple timing control while the energy utilization rate is low and the operators cannot monitor the working state of the street lights in real time, which causes great inconvenience to management and maintenance. This paper designs an intelligent street light control system based on power line carrier communication, which effectively utilizes the power grid resources. In view of the shortcomings in the insufficient distance of power line carrier communication, the signal relay method is adopted to effectively extend the communication distance. It realizes the real-time control and management of street lighting, therefore, meeting the need of intelligent lighting. The experimental results show that the system runs stably and reliably to have great popularization value.

Smart Solar-Powered Street Light Monitoring and Control System

Smart Solar-Powered Street Light Monitoring and Control System

Analysis on IoT based dynamic street light control system

Analysis on IoT based dynamic street light control system

Design of Energy Saving Board Based on Wireless Technology

This system based on NRF905 transceiver chip technology, the design breaks down into three parts to design, consisting of a single-chip microcomputer system section, press section and display components. Divided into two parts, part of the system display, other lamp control ends. Street light control terminals and system monitor nrf905 multi-point wireless data transmission, controlled by host part, set the time, number lighting conditions have bright lights and other functions. NRF905 wireless transceiver chip for data sent and received. Finally, after experimental verification, this design can be combined effectively, strong anti-jamming ability, perfect function, can be used in street light control.

RFID based Women Safety System with Automatic Street Light Control System

RFID based Women Safety System with Automatic Street Light Control System

Energy Efficient Street Light Supervising and Control System

Energy Efficient Street Light Supervising and Control System

Energy saving in the street lighting control system\u2014a new approach based on the EN-15232 standard

The street lighting is one of major components in total energy consumption in cities. The paper is focused on a concept of street lamp control systems and function organization with remote monitoring, to reduce maintenance costs and energy consumption. A new approach to the definition of functional strategy organization for outdoor lighting systems is introduced in the paper. Proposed functional strategies are based on four efficiency classes of building automation and control systems (BACS) defined in the EN 15323 standard. They have been formulated, analysed and eventually implemented and verified in real experiment street lighting installation. This outdoor lighting system, designed by the authors, based on LonWorks (the ISO/IEC EN 14908) platform with a power line communication aimed to control high-pressure sodium lamps. The street lamps are integrated nodes of a building management system (BMS). The results of experimental tests for the proposed functional strategies, implemented with various control scenarios, show that they provide a great potential in reducing energy consumption by street lighting installations. In particular, the energy use can be reduced even by 45 % in comparison to conventional street lighting system, especially without the use of monitoring and control.

GPS 위성통신과 아두이노를 이용한 에너지 절약형 LED 가로등 제어 시스템 개발에 관한 연구

Abstract A streetlight control system was developed using information technology and LED lights for efficient management and energy savings. The proposed system can control the power usage of an LED streetlight luminaireusing GPS satellite communication and an Arduino with a built-in microprocessor. A control circuit was designed to control the current using GPS, a control unit, transistor, resistor, and constant-current supply circuit. The circuit was validated through experiments with normal operation. Using GPS, the control system extracts accurate time and location information according to the season, and it controls the current supplied to the LED streetlight according to the extracted time. Power consumption was reduced by more than 11%. The control system could reduce accidentscaused by conventional lighting systems used to save energy, and it could improve the inefficient management of energy by preserving constant brightness of a streetlight at times and in areas that have less traffic.

Streetlight Control System Based on Wireless Communication over DALI Protocol

Public lighting represents a large part of the energy consumption of towns and cities. Efficient management of public lighting can entail significant energy savings. This work presents a smart system for managing public lighting networks based on wireless communication and the DALI protocol. Wireless communication entails significant economic savings, as there is no need to install new wiring and visual impacts and damage to the facades of historical buildings in city centers are avoided. The DALI protocol uses bidirectional communication with the ballast, which allows its status to be controlled and monitored at all times. The novelty of this work is that it tackles all aspects related to the management of public lighting: a standard protocol, DALI, was selected to control the ballast, a wireless node based on the IEEE 802.15.4 standard with a DALI interface was designed, a network layer that considers the topology of the lighting network has been developed, and lastly, some user-friendly applications for the control and maintenance of the system by the technical crews of the different towns and cities have been developed.

Solar Powered Intelligent Street Lighting System Based on Fuzzy Logic Controller

Intelligent Street lighting control system reduces the power consumption to a large extent. Dimming of lights based on natural light intensity helps in the reduction of power consumed. However, the wastage of power during meagre road usage in dark hours has to be addressed. In this paper, a novel fuzzy logic based controller is proposed to reduce the consumption of power when there is no vehicle travelling on the road during dark hours. By experimental analysis, it is proved that this system effectively reduces the power consumed by the street light.

PLC-Based Street Lighting Energy-Saving Equipment and its Remote Monitoring System

PLC (programmable logic controller)-based street lighting energy-saving and remote monitoring system is designed to improve energy-saving technology and management level. The designed illumination economizer contains PLC-based controller unit and compensating transformer unit, which can realize closed-loop voltage control at the stage of voltage stabilization, and reduce the negative influence of power line voltage fluctuation upon lamp service life and visual luminance. On the basis of the illumination economizer, a GPRS-based street light remote monitoring and control system is designed with configuration software. The whole system has been operating reliably in Harbin, China for many years with an over 50% energy-saving rate, decreasing the illumination management cost and promoting the intelligent management level.

A Sensor-Less and Energy Efficient StreetLight Control System

Work in this paper is directed towards the design of a cost effective and energy efficient Street light control system. The main idea is to provide an alternative to LDR and Hardware timer based street light control systems which have reliability and efficiency related issues. Light dependent resistors are prone to signal variations due to factors such as presence of dust, humidity etc. and therefore their outputs cannot always be relied. Hardware timer based controls have no such issues but due to the improper and untimely manual changeovers of time settings of the controls, they are not quite efficient. Some recent research work has been done on controls employing LASER gates to detect traffic in vicinity which switch on the lights only when there is presence of vehicles but such types require huge infrastructure for installing Laser transmitters and receivers at a height of two feet near each street lamp post which is not feasible keeping in mind the scope of the paper.