Abstract

Street lights remain illuminated for whole nights and most of them used for lighting-up of highways are high energy consumption lamps. Preservation and sustainable use of energy and resources is an important factor of planning and development these days as Natural resources are depleting day by day, which pose a risk of scarcity and non-availability of the same for our presidenting generations. There is an acute need for devising a well thought out plan to prevent wastage of electricity. Perhaps, the government should think of implementing automatic street light control systems using LDR (light dependent resistor). This review paper illustrates the street light illumination system automated by the movement (frequency) of vehicles on that particular street. The crux of this paper is to emancipate the necessity and usage of street light control systems which combines various technologies is Timers, Photodiodes, Light Emitting Diodes (LED), and IR Sensors.

Highlights

  • The inspiration of this research was obtain from the wastage of power and The shortage of power in an ever increasing power demand scenario in India

  • “What will be the solution in order to reduce the deficit power?” The concept of making this plan is to substitute a device for street lamps that do not eat Brobdingnag and efface darkness from myriad of places with very tremendous depth of sunshine effectively is challenging every engineer to run in the direction of this difficulty

  • The purpose of the IR sensor is to sense the movement of vehicles and the required power Light Emitting Diodes (LED) correspondingly

Read more

Summary

Introduction

“What will be the solution in order to reduce the deficit power?” The concept of making this plan is to substitute a device for street lamps that do not eat Brobdingnag (a quantity of strength) and efface darkness from myriad of places with very tremendous depth of sunshine effectively is challenging every engineer to run in the direction of this difficulty. Present Street lighting fixtures is one among the many but of profound importance and luxury obligations of a metropolis. With the use of LDR are there is an automatic switching to switch on the LEDs at dusk and switch off at dawn. Though this minimizes the power usage, it is not optimal and reliable. [Sharma et al, Vol. (Iss.: SE): February, 2018] [Communication, Integrated Networks & Signal Processing-CINSP 2018]

Objective
Description of Components
Power Supply
Voltage Regulator
Atmega16 Microcontroller
IR Transmitter – Receiver
Resistor
Capacitor
Conclusions and Recommendations
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call