AbstractThis paper presents a combined experimental and computational study of the steady flow through an internal combustion engine inlet port. The port was of generic design with a straight centreline. The three‐dimensional velocity and turbulence fields in the port and cylinder were simulated using a computational fluid dynamics programme. Laser sheet flow visualization and laser Doppler anemometry were also employed to investigate the flows and assess the predictions. The results show that a large‐scale flow structure is created in the cylinder by the inlet jet and its interaction with the valve and cylinder walls. Both predictions and measurements show that the flow is strongly dependent on the valve lift but is not affected by the flow rate. Comparisons of the numerical predictions with the experimental data indicated that the mean flow features are accurately predicted in many parts of the flow field; some discrepancies are evident and stem primarily from the failure of the simulation to predict a small recirculation region in the port which affects the trajectory of the annular jet entering the cylinder. Calculations were also made without modelling the port shape by using simplified inlet conditions upstream of the valve seat. It was found that this approximation can provide a reasonable, albeit less accurate, description of the flow, but modelling of the port shape is necessary for accurate flow predictions.