Hydrogel Stiffness Research Articles

Plant cellulose-based biomimetic artificial Small-Diameter vascular materials enabled by gradient Dual-Network entanglement

The development of materials that can act as small-diameter artificial blood vessels (SDABV) and can withstand the dynamic mechanical pressures and strains of native blood vessels (NBV) still represents a major challenge in cardiovascular disease treatment. Here, we report a biomimetic approach inspired by the hierarchical structure and interconnectivity of NBV that enables the fabrication of cellulose-based SDABV (2–5 mm). The ABV materials have an interconnected dual-network structure with a stiff regenerative cellulose hydrogel as the matrix and a photo-polymerized poly(hydroxyethyl methacrylate) as the filler. The distribution of the poly(hydroxyethyl methacrylate) in the cellulose network displays a gradient pattern. This produces a composite gel tube material that has a hierarchical structure with a dense and smooth surface, as well as a loose porous interior, which closely resembles that of NBV. As a result, the cellulose based SDABV shows similar mechanical performance with their natural counterparts, including tensile strength (1.4 MPa), strain (93 %), Young's modulus (2.98 MPa) and toughness (1040KJ/m3). Moreover, the materials show excellent suture retention and burst pressure that are sufficient to meet the requirements for ABV transplantation. In vitro biocompatibility experiments showed that the composite gel materials have excellent cell compatibility, blood compatibility, and low fibrinogen adsorption and platelet adhesion that is conducive to inhibiting thrombosis. In vivo experiments on rabbit models have shown that implanting the materials for three months does not cause blood vessel blockages or inflammatory responses. Overall, the bionic-structured and functional dual-network hydrogel grafts demonstrate tremendous potential in the application of SDABV. The knowledge gained in this study will help future design and application of novel high-performance cellulose-based SDABVs.

Serial Passaging Affects Stromal Cell Mechanosensitivity on Hyaluronic Acid Hydrogels.

There is a tremendous interest in developing hydrogels as tunable in vitro cell culture platforms to study cell response to mechanical cues in a controlled manner. However, little is known about how common cell culture techniques, such as serial expansion on tissue culture plastic, affect subsequent cell behavior when cultured on hydrogels. In this work, a methacrylated hyaluronic acid hydrogel platform is leveraged to study stromal cell mechanotransduction. Hydrogels are first formed through thiol-Michael addition to model normal soft tissue (e.g., lung) stiffness (E≈1kPa). Secondary cross-linking via radical photopolymerization of unconsumed methacrylates allows matching of early- (E≈6kPa) and late-stage fibrotic tissue (E≈50kPa). Early passage (P1) human bone marrow mesenchymal stromal cells (hMSCs) display increased spreading, myocardin-related transcription factor-A (MRTF-A) nuclear localization, and focal adhesion size with increasing hydrogel stiffness. However, late passage (P5) hMSCs show reduced sensitivity to substrate mechanics with lower MRTF-A nuclear translocation and smaller focal adhesions on stiffer hydrogels compared to early passage hMSCs. Similar trends are observed in an immortalized human lung fibroblast line. Overall, this work highlights the implications of standard cell culture practices on investigating cell response to mechanical signals using in vitro hydrogel models.

Synthesis of Silanized Bioactive Glass/Gelatin Methacrylate (GelMA/Si-BG) composite hydrogel for Bone Tissue Engineering Application

Bioactive glass (BG) has been widely employed in the field of bone tissue engineering owing to its osteoconductive properties. These properties increase the stiffness and bioactivity of polymeric hydrogels, making them ideal for the repair, replacement, and regeneration of damaged bones. In this study, we investigated the effects of incorporating silanized 45S5 bioactive glass (Si-BG) into gelatin methacrylate (GelMA) hydrogel (GelMA/Si-BG) for potential bone tissue engineering. Our findings revealed that crosslinking GelMA with Si-BG had a striking increase in bioactivity with and without osteogenic induction of human mesenchymal stem cells (hMSCs) when compared to GelMA/BG hydrogels. Meanwhile, both GelMA/Si-BG and GelMA/BG hydrogels were able to maintain the cell viability of hMSC for up to 14 days. Additionally, GelMA/Si-BG hydrogels were shown to have a significantly higher compressive modulus than GelMA/BG hydrogels. This study has demonstrated the introduction of silanized 45S5 BG into GelMA hydrogel bioactivity and mechanical properties of GelMA hydrogels, exemplifying the potential application of silanization of BG in bone tissue engineering.

3D bioprinted endothelial cell-microglia coculture for diabetic retinopathy modeling

Diabetic retinopathy (DR) is a common diabetes complication leading to vision impairment or blindness due to retinal vasculature alterations. Hyperglycemia induces structural alterations, inflammation, and angiogenic factor upregulation. Current treatments targeting vascular endothelial growth factor are insufficient for approximately 20% of DR patients, necessitating alternative approaches. Microglia (MG), essential for retinal homeostasis, remains underexplored in DR. This study used digital light processing bioprinting to construct a 3D coculture model of endothelial cells (ECs) and MG under varying glucose conditions, with a hydrogel stiffness of 4.6–7.1 kPa to mimic the extracellular matrix property of retina plexiform. Our results showed that high glucose levels influenced both EC and microglial phenotypes, gene expression, and angiogenic potential. Increasing glucose from 5 mM to 25 mM reduces drug efficacy by 17% for Aflibercept in EC monoculture, and 25% and 30% for Aflibercept and Conbercept in EC-MG coculture, respectively, suggesting that diabetic condition and MG presence could interfere with drug responses. In conclusion, our findings emphasize the importance of cellular interactions and microenvironmental factors in DR therapy, aiming to identify novel strategies and improve understanding of MG’s role in disease pathogenesis.

Encapsulation of Human Spinal Cord Progenitor Cells in Hyaluronan-Gelatin Hydrogel for Spinal Cord Injury Treatment.

Transplanting human induced pluripotent stem cells (iPSCs)-derived spinal cord progenitor cells (SCPCs) is a promising approach to treat spinal cord injuries. However, stem cell therapies face challenges in cell survival, cell localization to the targeted site, and the control of cell differentiation. Here, we encapsulated SCPCs in thiol-modified hyaluronan-gelatin hydrogels and optimized scaffold mechanical properties and cell encapsulation density to promote cell viability and neuronal differentiation in vitro and in vivo. Different compositions of hyaluronan-gelatin hydrogels formulated by varying concentrations of poly(ethylene glycol) diacrylate were mechanically characterized by using atomic force microscopy. In vitro SCPC encapsulation study showed higher cell viability and proliferation with lower substrate Young's modulus (200 Pa vs 580 Pa) and cell density. Moreover, the soft hydrogels facilitated a higher degree of neuronal differentiation with extended filament structures in contrast to clumped cellular morphologies obtained in stiff hydrogels (p < 0.01). When transplanted in vivo, the optimized SCPC-encapsulated hydrogels resulted in higher cell survival and localization at the transplanted region as compared to cell delivery without hydrogel encapsulation at 2 weeks postimplantation within the rat spinal cord (p < 0.01). Notably, immunostaining demonstrated that the hydrogel-encapsulated SCPCs differentiated along the neuronal and oligodendroglial lineages in vivo. The lack of pluripotency and proliferation also supported the safety of the SCPC transplantation approach. Overall, the injectable hyaluronan-gelatin hydrogel shows promise in supporting the survival and neural differentiation of human SCPCs after transplantation into the spinal cord.

The interplay between chemical conjugation and biologic performance in the development of alginate-based 3D matrices to mimic neural microenvironments

Biofunctionalization of polysaccharides is a widely used strategy for obtaining extracellular matrix (ECM)-mimicking biomaterials. Still, commonly employed chemistries present low reaction yields and the selection of the most adequate bioconjugation route can be challenging. Herein, we compared the performance of carbodiimide and reductive amination chemistries for the synthesis of tailored peptide-alginate hybrid hydrogels as neural tissue mimics. Reductive amination dramatically improved the peptide grafting efficiency, with yields of 50 % vs. 20 %, allowing 1.5 to 3-fold higher incorporation of cell-adhesive and matrix-metalloproteinases (MMP)-sensitive peptides, respectively. The conjugation of dual-end reactive MMP-sensitive peptides promoted a partial crosslinking, allowing adjusting gelation, stiffness, and degradability of hydrogels. Such parameters depended on the glycosidic position where the bioactive peptide binds, determined by the adopted chemical strategy, and this significantly impacted the biological response. Reductive amination provided softer (50–210 Pa) and fully degradable (60–100 % weight loss) hydrogels, depending on the amount of peptide in formulation, contrasting with the stiffer (400 Pa) and less degradable (40 % weight loss) carbodiimide-based hydrogels. Due to their opened polymer chain and increased peptide availability to cells, such hydrogels better supported the 3D culture of primary astrocytes, which present high complexity and process branching, allowing the development of improved brain ECM-mimicking systems.

Optimization of Gelatin Methacryloyl Hydrogel Properties through an Artificial Neural Network Model.

Gelatin methacryloyl (GelMA) hydrogels are promising materials for tissue engineering applications due to their biocompatibility and tunable properties. However, the time-consuming process of preparing GelMA hydrogels with desirable properties for specific biomedical applications limits their clinical use. Visible-light-induced cross-linking is a well-known method for the preparation of GelMA hydrogels; however, a comprehensive investigation on the influence of critical parameters such as Eosin Y (EY), triethanolamine (TEA), and N-vinyl-2-pyrrolidone (NVP) concentrations on the stiffness and gelation time has yet to be performed. In this study, we systematically investigated the effect of these critical parameters on the stiffness and gelation time of GelMA hydrogels. We developed an artificial neural network (ANN) model with three input variables, EY, TEA, and NVP concentrations, and two output variables, Young's modulus and gelation time, derived from our experimental design. Through the alteration of individual chemical concentrations, [EY] between 0.005 and 0.5 mM and [TEA] and [NVP] between 10 and 1000 mM, we studied the impact of these alterations on the real-time values of stiffness and gelation time. Furthermore, we demonstrated the validity of the ANN model in predicting the properties of GelMA hydrogels. We also studied cell survival to establish nontoxic concentration ranges for each component, enabling safer use of GelMA hydrogels in relevant biomedical applications. Our results showed that the ANN model can accurately predict the properties of GelMA hydrogels, allowing for the synthesis of hydrogels with desirable stiffness for various biomedical applications. In conclusion, our study provides a comprehensive library that characterizes the stiffness and gelation time and demonstrates the potential of the ANN model to predict these properties of GelMA hydrogels depending on the critical parameters. The ANN models developed here can facilitate the optimization of GelMA hydrogels with the most efficient mechanical properties that resemble a native extracellular matrix and better address the need in the in vivo microenvironment. The approach of this study is to bring research about the synthesis of GelMA hydrogels to a new level where the synthesis of these hydrogels can be standardized with minimum cost and effort.

The Mechanical and Biological Performance of Photopolymerized Gelatin-Based Hydrogels as a Function of the Reaction Media.

From the first experiments with biomaterials to mimic tissue properties, the mechanical and biochemical characterization have evolved extensively. A number of properties can be described, however, what should be essential is to conduct a proper and physiologically relevant characterization. Herein, we describe the influence of the reaction media and buffer media -phosphate buffer saline (PBS) and Dulbecco's modified Eagle's medium (DMEM) with two different glucose concentrations- in GelMA hydrogel mechanics and in the biological behavior of two tumoral cell lines (Caco-2 and HCT-116). All scaffolds were photocrosslinked using UV light under identical conditions and evaluated for mass swelling ratio and stiffness. Our results indicate that stiffness is highly susceptible to the reaction media, but not to the swelling media. In addition, PBS-prepared hydrogels exhibited a higher photopolymerization degree as confirmed by HR-MAS NMR. These findings correlate with the biological response of Caco-2 and HCT-116 cells seeded on the substrates, which demonstrated flatter morphologies on stiffer hydrogels. Overall, cell viability and proliferation were excellent for both cell lines, and Caco-2 cells displayed a characteristic apical-basal polarization as observed in F-actin/Nuclei fluorescence images. These characterization experiments highlight the importance of conducting mechanical testing of biomaterials in the same medium as cell culture. This article is protected by copyright. All rights reserved.

Vaginal Fibroblast Behavior as a Function of Stiffness Changes in a Polyisocyanide Hydrogel for Prolapse Repair.

There is an urgent need for improved outcomes in the treatment of pelvic organ prolapse (POP). Success of primary surgery relies on the load bearing capacity of plicated connective tissue underneath the vaginal wall, which is compromised due to an altered vaginal fibroblast function and collagen composition. There is an important factor in connective tissue repair that relates to changes in stiffness of the vaginal fibroblast microenvironment, which influences cell activity through cellular mechanosensing. The aim of this study is to investigate the effect of stiffness changes on vaginal fibroblast functions that relate to connective tissue healing in prolapse repair. The substrate stiffness was controlled by changing the polymer concentration in the fibrous and strongly biomimetic polyisocyanide (PIC) hydrogel. We analyzed stiffness during cell culture and assessed the consequential fibroblast proliferation, morphology, collagen deposition, and contraction. Our results show that increasing stiffness coincides with vaginal fibroblast alignment, promotes collagen deposition, and inhibits PIC gel contraction. These findings suggest that the matrix stiffness directly influences vaginal fibroblast functionality. Moreover, we observed a buildup in stiffness and collagen, with an enhanced fibroblast and collagen organization on the PIC-substrate, which indicate an enhanced structural integrity of the hydrogel-cell construct. An improved tissue structure during healing is relevant in the functional repair of POP. Therefore, this study encourages future research in the use of PIC gels as a supplement in prolapse surgery, whereby the hydrogel stiffness should be considered.

Peptide Stereocomplexation Orchestrates Supramolecular Assembly of Hydrogel Biomaterials.

Stereocomplexation, or specific interactions among complementary stereoregular macromolecules, is burgeoning as an increasingly impactful design tool, exerting exquisite control of material structure and properties. Since stereocomplexation of polymers produces remarkable transformations in mechanics, morphology, and degradation, we sought to leverage stereocomplexation to tune these properties in peptide-based biomaterials. We found that blending the pentapeptides l- and d-KYFIL triggers dual mechanical and morphological transformations from stiff fibrous hydrogels into less stiff networks of plates, starkly contrasting prior reports that blending l- and d-peptides produces stiffer fibrous hydrogels than the individual constituents. The morphological transformation of KYFIL in phosphate-buffered saline from fibers that entangle into hydrogels to plates that cannot entangle explains the accompanying mechanical transformation. Moreover, the blends shield l-KYFIL from proteolytic degradation, producing materials with comparable proteolytic stability to d-KYFIL but with distinct 2D plate morphologies that in biomaterials may promote unique therapeutic release profiles and cell behavior. To confirm that these morphological, mechanical, and stability changes arise from differences in molecular packing as in polymer stereocomplexation, we acquired X-ray diffraction patterns, which showed l- and d-KYFIL to be amorphous and their blends to be crystalline. Stereocomplexation is particularly apparent in pure water, where l- and d-KYFIL are soluble random coils, and their blends form β-sheets and gel within minutes. Our results highlight the role of molecular details, such as peptide sequence, in determining the material properties resulting from stereocomplexation. Looking forward, the ability of stereocomplexation to orchestrate supramolecular assembly and tune application-critical properties champions stereochemistry as a compelling design consideration.

Structurally decoupled stiffness and solute transport in multi-arm poly(ethylene glycol) hydrogels

Synthetic hydrogels are widely used as artificial 3D environments for cell culture, facilitating the controlled study of cell-environment interactions. However, most hydrogels are limited in their ability to represent the physical properties of biological tissues because stiffness and solute transport properties in hydrogels are closely correlated. Resultingly, experimental investigations of cell-environment interactions in hydrogels are confounded by simultaneous changes in multiple physical properties. Here, we overcame this limitation by simultaneously manipulating four structural parameters to synthesize a library of multi-arm poly (ethylene glycol) (PEG) hydrogel formulations with robustly decoupled stiffness and solute transport. This structural design approach avoids chemical alterations or additions to the network that might have unanticipated effects on encapsulated cells. An algorithm created to statistically evaluate stiffness-transport decoupling within the dataset identified 46 of the 73 synthesized formulations as robustly decoupled. We show that the swollen polymer network model accurately predicts 11 out of 12 structure-property relationships, suggesting that this approach to decoupling stiffness and solute transport in hydrogels is fundamentally validated and potentially broadly applicable. Furthermore, the unprecedented control of hydrogel network structure provided by multi-arm PEG hydrogels confirmed several fundamental modeling assumptions. This study enables nuanced hydrogel design for uncompromised investigation of cell-environment interactions.

Reducing 3D Hydrogel Stiffness, Addition of Oestradiol in a Physiological Concentration and Increasing FSH Concentration Improve In Vitro Growth of Murine Preantral Follicles.

This study aimed to optimise culture conditions for murine preantral follicles to improve their growth and survival. Preantral follicles (diameter 100-130 µm) were isolated from prepubertal NMRI mice and individually cultured within alginate beads for 12 days. Three conditions were evaluated: (1) follicle re-encapsulation on day 6 of culture-reducing alginate concentration (0.5% to 0.25% w/v), (2) the presence of oestradiol (E2), and (3) increased follicle-stimulating hormone (FSH) concentration in the culture medium (from 10 to 100 mIU/mL FSH). Follicle morphology and growth, as well as anti-Müllerian hormone (AMH) production, were evaluated. From day 8, re-embedded follicles had a larger average diameter compared to follicles without alginate re-encapsulation (0.5% and 0.25% groups, p < 0.05). Oestradiol (1 µM) had a significantly positive effect on the mean follicular diameter and antrum formation (p < 0.001). Moreover, follicles cultured with 100 mIU/mL FSH showed faster growth (p < 0.05) and significantly higher antrum formation (p < 0.05) compared to the low FSH group. Nevertheless, AMH production was not affected by any of the culture conditions. In conclusion, the growth and survival of mouse preantral follicles during a 12-day period were improved by altering the alginate concentration midways during culture and adding E2 and FSH to the culture medium.

Stimuli-Responsive DNA-Based Hydrogels on Surfaces for Switchable Bioelectrocatalysis and Controlled Release of Loads.

The assembly of enzyme [glucose oxidase (GOx)]-loaded stimuli-responsive DNA-based hydrogels on electrode surfaces, and the triggered control over the stiffness of the hydrogels, provides a means to switch the bioelectrocatalytic functions of the hydrogels. One system includes the assembly of GOx-loaded, pH-responsive, hydrogel matrices cross-linked by two cooperative nucleic acid motives comprising permanent duplex nucleic acids and "caged" i-motif pH-responsive duplexes. Bioelectrocatalyzed oxidation of glucose leads to the formation of gluconic acid that acidifies the hydrogel resulting in the separation of the i-motif constituents and lowering the hydrogel stiffness. Loading of the hydrogel matrices with insulin results in the potential-triggered, glucose concentration-controlled, switchable release of insulin from the hydrogel-modified electrodes. The switchable bioelectrocatalyzed release of insulin is demonstrated in the presence of ferrocenemethanol as a diffusional electron mediator or by applying an electrically wired integrated matrix that includes ferrocenyl-modified GOx embedded in the hydrogel. The second GOx-loaded, stimuli-responsive, DNA-based hydrogel matrix associated with the electrode includes a polyacrylamide hydrogel cooperatively cross-linked by duplex nucleic acids and "caged" G-quadruplex-responsive duplexes. The hydrogel matrix undergoes K+-ions/crown ether-triggered stiffness changes by the cyclic K+-ion-stimulated formation of G-quadruplexes (lower stiffness) and the crown ether-induced separation of the G-quadruplexes (higher stiffness). The hydrogel matrices demonstrate switchable bioelectrocatalytic functions guided by the stiffness properties of the hydrogels.

Dynamic Hydrogels with Viscoelasticity and Tunable Stiffness for the Regulation of Cell Behavior and Fate.

The extracellular matrix (ECM) of natural cells typically exhibits dynamic mechanical properties (viscoelasticity and dynamic stiffness). The viscoelasticity and dynamic stiffness of the ECM play a crucial role in biological processes, such as tissue growth, development, physiology, and disease. Hydrogels with viscoelasticity and dynamic stiffness have recently been used to investigate the regulation of cell behavior and fate. This article first emphasizes the importance of tissue viscoelasticity and dynamic stiffness and provides an overview of characterization techniques at both macro- and microscale. Then, the viscoelastic hydrogels (crosslinked via ion bonding, hydrogen bonding, hydrophobic interactions, and supramolecular interactions) and dynamic stiffness hydrogels (softening, stiffening, and reversible stiffness) with different crosslinking strategies are summarized, along with the significant impact of viscoelasticity and dynamic stiffness on cell spreading, proliferation, migration, and differentiation in two-dimensional (2D) and three-dimensional (3D) cell cultures. Finally, the emerging trends in the development of dynamic mechanical hydrogels are discussed.

Stiffness-tuned and ROS-sensitive hydrogel incorporating complement C5a receptor antagonist modulates antibacterial activity of macrophages for periodontitis treatment.

Periodontitis is admittedly a microbe-driven intractable infectious disease, in which Porphyromonas gingivalis (Pg) plays a keystone role. Pg can selectively impair the antimicrobial responses of periodontal resident macrophages including their phagocytic and bactericidal activity without interfering their proinflammatory activity, which leads to microflora disturbance, destructive periodontal inflammation and alveolar bone loss eventually. Here, an injectable ROS-sensitive hydrogel is developed for releasing active bone marrow-derived macrophages (named ex-situ macrophages hereafter) and a complement C5a receptor antagonist (C5A) to the gingival crevice. Through appropriately tuning the hydrogel stiffness, the phagocytic activity of these macrophages is greatly enhanced, reaching an optimal performance at the elastic modulus of 106kPa. Meanwhile, C5A avoids undesired C5a receptor activation by Pg to ensure the bacterial killing activity of both the ex-situ and in-situ macrophages. Besides, the ROS-sensitive hydrogels show another distinct feature of decreasing the ROS level in periodontal niche, which contributes to the alleviated periodontal inflammation and attenuated bone loss as well. This study highlights the potential of utilizing hydrogels with tailored biomechanical properties to remodel the functions of therapeutic cells, which is expected to find wide applications even beyond periodontitis treatment.

Epithelial multicellular clustering enabled by polarized macrophages on soft matrices.

Formation of epithelial structures of variegated geometries and sizes is essential for organogenesis, tumor growth, and wound repair. Although epithelial cells are predisposed with potential for multicellular clustering, it remains unclear whether immune cells and mechanical cues from their microenvironment influence this process. To explore this possibility, we cocultured human mammary epithelial cells with prepolarized macrophages on soft or stiff hydrogels. In the presence of M1 (proinflammatory) macrophages on soft matrices, epithelial cells migrated faster and subsequently formed larger multicellular clusters compared to cocultures with M0 (unpolarized) or M2 (anti-inflammatory) macrophages. By contrast, stiff matrices disabled active clustering of epithelial cells due to their enhanced migration and cell-ECM adhesion, regardless of macrophage polarization. We found that the copresence of soft matrices and M1 macrophages reduced focal adhesions, but enhanced fibronectin deposition and nonmuscle myosin-IIA expression, which altogether optimize conditions for epithelial clustering. Upon ROCK inhibition, epithelial clustering was abrogated, indicating a requirement for optimized cellular forces. In these cocultures, TNF-α secretion was the highest with M1 macrophages and TGF-β secretion was exclusively detectable in case of M2 macrophages on soft gels, which indicated potential role of macrophage secreted factors in the observed epithelial clustering. Indeed, exogenous addition of TGF-β promoted epithelial clustering with M1 coculture on soft gels. According to our findings, optimization of both mechanical and immune factors can tune epithelial clustering responses, which could have implications in tumor growth, fibrosis, and would healing.

Post-Implantation Stiffening by a Bioinspired, Double-Network, Self-Healing Hydrogel Facilitates Minimally Invasive Cell Delivery for Cartilage Regeneration.

Injectable hydrogels have demonstrated advantages in cartilage repair by enabling the delivery of cells through a minimally invasive approach. However, several injectable hydrogels suffer from rapid degradation and low mechanical strength. Moreover, higher mechanical stiffness in hydrogels can have a detrimental effect on post-implantation cell viability. To address these challenges, we developed an in situ forming bioinspired double network hydrogel (BDNH) that exhibits temperature-dependent stiffening after implantation. The BDNH mimics the microarchitecture of aggrecan, with hyaluronic acid-conjugated poly(N-isopropylacrylamide) providing rigidity and Schiff base crosslinked polymers serving as the ductile counterpart. BDNHs exhibited self-healing property and enhanced stiffness at physiological temperature. Excellent cell viability, long time cell proliferation, and cartilage specific matrix production were observed in the chondrocytes cultured in the BDNH hydrogel. Evidence of cartilage regeneration in a rabbit cartilage defect model using chondrocyte-laden BDNH has suggested it to be a potential candidate for cartilage tissue engineering.

Construction of enzyme digested holes on hydrogel surface inspired by cell migration processes

The construction of in vitro capillary network models for drug testing and toxicity evaluation has become a major challenge in the field of tissue engineering. Previously, we discovered a novel phenomenon of hole formation by endothelial cell migration on the surface of fibrin gels. Interestingly, the hole characteristics, such as depth and number, were strongly influenced by the gel stiffness, but the details of hole formation are not to be clarified.In this study, we tried to understand the effect of hydrogel stiffness on the hole formation by dropping collagenase solution onto the surface of the hydrogels because the endothelial cell migration was made possible by the metalloproteinases' digestion. We found that smaller hole structures were formed on stiffer fibrin gels, but larger ones were formed on softer fibrin gels after the hydrogel digestion of the collagenase. This is consistent with our previous results in experiments on hole structures formed by endothelial cells. Furthermore, deep and small hole structures were successfully obtained by optimizing the volume of collagenase solution and incubation time. This unique approach inspired by endothelial cell hole formation may provide new methods of fabricating hydrogels with opening hole structures.

Development of a novel air–liquid interface airway tissue equivalent model for in vitro respiratory modeling studies

The human airways are complex structures with important interactions between cells, extracellular matrix (ECM) proteins and the biomechanical microenvironment. A robust, well-differentiated in vitro culture system that accurately models these interactions would provide a useful tool for studying normal and pathological airway biology. Here, we report the development and characterization of a physiologically relevant air–liquid interface (ALI) 3D airway ‘organ tissue equivalent’ (OTE) model with three novel features: native pulmonary fibroblasts, solubilized lung ECM, and hydrogel substrate with tunable stiffness and porosity. We demonstrate the versatility of the OTE model by evaluating the impact of these features on human bronchial epithelial (HBE) cell phenotype. Variations of this model were analyzed during 28 days of ALI culture by evaluating epithelial confluence, trans-epithelial electrical resistance, and epithelial phenotype via multispectral immuno-histochemistry and next-generation sequencing. Cultures that included both solubilized lung ECM and native pulmonary fibroblasts within the hydrogel substrate formed well-differentiated ALI cultures that maintained a barrier function and expressed mature epithelial markers relating to goblet, club, and ciliated cells. Modulation of hydrogel stiffness did not negatively impact HBE differentiation and could be a valuable variable to alter epithelial phenotype. This study highlights the feasibility and versatility of a 3D airway OTE model to model the multiple components of the human airway 3D microenvironment.

Cartilage-like protein hydrogels engineered via entanglement.

Load-bearing tissues, such as muscle and cartilage, exhibit high elasticity, high toughness and fast recovery, but have different stiffness (with cartilage being significantly stiffer than muscle)1-8. Muscle achieves its toughness through finely controlled forced domain unfolding-refolding in the muscle protein titin, whereas articular cartilage achieves its high stiffness and toughness through an entangled network comprising collagen and proteoglycans. Advancements in protein mechanics and engineering have made it possible to engineer titin-mimetic elastomeric proteins and soft protein biomaterials thereof to mimic the passive elasticity of muscle9-11. However, it is more challenging to engineer highly stiff and tough protein biomaterials to mimic stiff tissues such as cartilage, or develop stiff synthetic matrices for cartilage stem and progenitor cell differentiation12. Here we report the use of chain entanglements to significantly stiffen protein-based hydrogels without compromising their toughness. By introducing chain entanglements13 into the hydrogel network made of folded elastomeric proteins, we are able to engineer highly stiff and tough protein hydrogels, which seamlessly combine mutually incompatible mechanical properties, including high stiffness, high toughness, fast recovery and ultrahigh compressive strength, effectively converting soft protein biomaterials into stiff and tough materials exhibiting mechanical properties close to those of cartilage. Our study provides a general route towards engineering protein-based, stiff and tough biomaterials, which will find applications in biomedical engineering, such as osteochondral defect repair, and material sciences and engineering.