Stator Stalk Research Articles

Protonation-dependent stepped rotation of the F-type ATP synthase c-ring observed by single-molecule measurements

The two opposed rotary molecular motors of the F0F1-ATP synthase work together to provide the majority of ATP in biological organisms. Rotation occurs in 120° power strokes separated by dwells when F1 synthesizes or hydrolyzes ATP. F0 and F1 complexes connect via a central rotor stalk and a peripheral stator stalk. A major unresolved question is the mechanism in which the interaction between subunit-a and rotating subunit-c-ring in the F0 motor uses the flux of H+ across the membrane to induce clockwise rotation against the force of counterclockwise rotation driven by the F1-ATPase. In single-molecule measurements of F0F1 embedded in lipid bilayer nanodiscs, we observed that the ability of the F0 motor to form transient dwells increases with decreasing pH. Transient dwells can halt counterclockwise rotation powered by the F1-ATPase in steps equivalent to the rotation of single c-subunits in the c-ring of F0, and can push the common axle shared by the two motors clockwise by as much as one c-subunit. Because the F0 proton half-channels that access the periplasm and the cytoplasm are exposed to the same pH, these data are consistent with the conclusion that the periplasmic half-channel is more easily protonated in a manner that halts ATPase-driven rotation by blocking ATPase-dependent proton pumping. The fit of transient dwell occurrence to the sum of three Gaussian curves suggests that the asymmetry of the three ATPase-dependent 120° power strokes imposed by the relative positions of the central and peripheral stalks affects c-subunit stepping efficiency.

Mitochondrial Efficiency-Dependent Viability of Saccharomyces cerevisiae Mutants Carrying Individual Electron Transport Chain Component Deletions.

Mitochondria play a crucial role in eukaryotic cells; the mitochondrial electron transport chain (ETC) generates adenosine triphosphate (ATP), which serves as an energy source for numerous critical cellular activities. However, the ETC also generates deleterious reactive oxygen species (ROS) as a natural byproduct of oxidative phosphorylation. ROS are considered the major cause of aging because they damage proteins, lipids, and DNA by oxidation. We analyzed the chronological life span, growth phenotype, mitochondrial membrane potential (MMP), and intracellular ATP and mitochondrial superoxide levels of 33 single ETC component-deleted strains during the chronological aging process. Among the ETC mutant strains, 14 (sdh1Δ, sdh2Δ, sdh4Δ, cor1Δ, cyt1Δ, qcr7Δ, qcr8Δ, rip1Δ, cox6Δ, cox7Δ, cox9Δ, atp4Δ, atp7Δ, and atp17Δ) showed a significantly shorter life span. The deleted genes encode important elements of the ETC components succinate dehydrogenase (complex II) and cytochrome c oxidase (complex IV), and some of the deletions lead to structural instability of the membrane-F1F0-ATP synthase due to mutations in the stator stalk (complex V). These short-lived strains generated higher superoxide levels and produced lower ATP levels without alteration of MMP. In summary, ETC mutations decreased the life span of yeast due to impaired mitochondrial efficiency.

Assembly of human mitochondrial ATP synthase through two separate intermediates, F1-c-ring and b–e–g complex

Mitochondrial ATP synthase is a motor enzyme in which a central shaft rotates in the stator casings fixed with the peripheral stator stalk. When expression of d-subunit, a stator stalk component, was knocked-down, human cells could not form ATP synthase holocomplex and instead accumulated two subcomplexes, one containing a central rotor shaft plus catalytic subunits (F1-c-ring) and the other containing stator stalk components (“b–e–g” complex). F1-c-ring was also formed when expression of mitochondrial DNA-coded a-subunit and A6L was suppressed. Thus, the central rotor shaft and the stator stalk are formed separately and they assemble later. Similar assembly strategy has been known for ATP synthase of yeast and Escherichia coli and could be common to all organisms.

Escherichia coli F1Fo-ATP Synthase with a b/δ Fusion Protein Allows Analysis of the Function of the Individual b Subunits

The "stator stalk" of F1Fo-ATP synthase is essential for rotational catalysis as it connects the nonrotating portions of the enzyme. In Escherichia coli, the stator stalk consists of two (identical) b subunits and the δ subunit. In mycobacteria, one of the b subunits and the δ subunit are replaced by a b/δ fusion protein; the remaining b subunit is of the shorter b' type. In the present study, it is shown that it is possible to generate a functional E. coli ATP synthase containing a b/δ fusion protein. This construct allowed the analysis of the roles of the individual b subunits. The full-length b subunit (which in this case is covalently linked to δ in the fusion protein) is responsible for connecting the stalk to the catalytic F1 subcomplex. It is not required for interaction with the membrane-embedded Fo subcomplex, as its transmembrane helix can be removed. Attachment to Fo is the function of the other b subunit which in turn has only a minor (if any at all) role in binding to δ. Also in E. coli the second b subunit can be shortened to a b' type.

The dynamic stator stalk of rotary ATPases

Rotary ATPases couple ATP hydrolysis/synthesis with proton translocation across biological membranes and so are central components of the biological energy conversion machinery. Their peripheral stalks are essential components that counteract torque generated by rotation of the central stalk during ATP synthesis or hydrolysis. Here we present a 2.25-Å resolution crystal structure of the peripheral stalk from Thermus thermophilus A-type ATPase/synthase. We identify bending and twisting motions inherent within the structure that accommodate and complement a radial wobbling of the ATPase headgroup as it progresses through its catalytic cycles, while still retaining azimuthal stiffness necessary to counteract rotation of the central stalk. The conformational freedom of the peripheral stalk is dictated by its unusual right-handed coiled-coil architecture, which is in principle conserved across all rotary ATPases. In context of the intact enzyme, the dynamics of the peripheral stalks provides a potential mechanism for cooperativity between distant parts of rotary ATPases.

Two rotary motors in F-ATP synthase are elastically coupled by a flexible rotor and a stiff stator stalk

ATP is synthesized by ATP synthase (F(O)F(1)-ATPase). Its rotary electromotor (F(O)) translocates protons (in some organisms sodium cations) and generates torque to drive the rotary chemical generator (F(1)). Elastic power transmission between F(O) and F(1) is essential for smoothing the cooperation of these stepping motors, thereby increasing their kinetic efficiency. A particularly compliant elastic domain is located on the central rotor (c(10-15)/ε/γ), right between the two sites of torque generation and consumption. The hinge on the active lever on subunit β adds further compliance. It is under contention whether or not the peripheral stalk (and the "stator" as a whole) also serves as elastic buffer. In the enzyme from Escherichia coli, the most extended component of the stalk is the homodimer b(2), a right-handed α-helical coiled coil. By fluctuation analysis we determined the spring constant of the stator in response to twisting and bending, and compared wild-type with b-mutant enzymes. In both deformation modes, the stator was very stiff in the wild type. It was more compliant if b was elongated by 11 amino acid residues. Substitution of three consecutive residues in b by glycine, expected to destabilize its α-helical structure, further reduced the stiffness against bending deformation. In any case, the stator was at least 10-fold stiffer than the rotor, and the enzyme retained its proton-coupled activity.

Domain Characterization and Interaction of the Yeast Vacuolar ATPase Subunit C with the Peripheral Stator Stalk Subunits E and G

The proton pumping activity of the eukaryotic vacuolar ATPase (V-ATPase) is regulated by a unique mechanism that involves reversible enzyme dissociation. In yeast, under conditions of nutrient depletion, the soluble catalytic V(1) sector disengages from the membrane integral V(o), and at the same time, both functional units are silenced. Notably, during enzyme dissociation, a single V(1) subunit, C, is released into the cytosol. The affinities of the other V(1) and V(o) subunits for subunit C are therefore of particular interest. The C subunit crystal structure shows that the subunit is elongated and dumbbell-shaped with two globular domains (C(head) and C(foot)) separated by a flexible helical neck region (Drory, O., Frolow, F., and Nelson, N. (2004) EMBO Rep. 5, 1148-1152). We have recently shown that subunit C is bound in the V(1)-V(o) interface where the subunit is in contact with two of the three peripheral stators (subunit EG heterodimers): one via C(head) and one via C(foot) (Zhang, Z., Zheng, Y., Mazon, H., Milgrom, E., Kitagawa, N., Kish-Trier, E., Heck, A. J., Kane, P. M., and Wilkens, S. (2008) J. Biol. Chem. 283, 35983-35995). In vitro, however, subunit C binds only one EG heterodimer (Féthière, J., Venzke, D., Madden, D. R., and Böttcher, B. (2005) Biochemistry 44, 15906-15914), implying that EG has different affinities for the two domains of the C subunit. To determine which subunit C domain binds EG with high affinity, we have generated C(head) and C(foot) and characterized their interaction with subunit EG heterodimer. Our findings indicate that the high affinity site for EGC interaction is C(head). In addition, we provide evidence that the EGC(head) interaction greatly stabilizes EG heterodimer.

Membrane Topology of Subunit 8 Variant of Yeast Saccharomyces cerevisiae Mitochondrial ATP Synthase

The yeast mitochondrial F1F0-ATP synthase is a multisubunit complex that contains at least 17 different subunits. Subunit 8 of yeast mitochondrial ATP synthase is a hydrophobic protein of 48 amino acids encoded by the mitochondrial ATP8 gene. There is no homologue of subunit 8 found in bacteria. Subunit 8 has three distinct domains; an N-terminal domain, a central hydrophobic domain and a C-terminal domain. Subunit 8 has been shown to adopt a transmembrane topology with the central hydrophobic domain spans the inner mitochondrial membrane once. In order to elucidate the need of subunit 8 to maintain transmembrane topology for its functioning, a severely functionally defective subunit 8 variant that has been introduced with double-charged residues within the central hydrophobic domain was analysed. A gene encoding this variant was expressed in a yeast strain lacking endogenous subunit 8. The subunit 8 variant was then targeted into mitochondria. Following its assembly into mitochondrial ATP synthase complex, its membrane topology was determined. The results obtained showed that subunit 8 was obligatory to maintain a transmembrane topology for providing proper functioning. The transmembrane topology may be critical for subunit 8’s proposed tructural roles as part of the stator stalk of the mitochondrial ATP synthase complex.

S1/3 The stator stalk of Escherichia coli ATP synthase

S1/3 The stator stalk of Escherichia coli ATP synthase

Probing the functional tolerance of the b subunit of Escherichia coli ATP synthase for sequence manipulation through a chimera approach

A dimer of 156-residue b subunits forms the peripheral stator stalk of eubacterial ATP synthase. Dimerization is mediated by a sequence with an unusual 11-residue (hendecad) repeat pattern, implying a right-handed coiled coil structure. We investigated the potential for producing functional chimeras in the b subunit of Escherichia coli ATP synthase by replacing parts of its sequence with corresponding regions of the b subunits from other eubacteria, sequences from other polypeptides having similar hendecad patterns, and sequences forming left-handed coiled coils. Replacement of positions 55–110 with corresponding sequences from Bacillus subtilis and Thermotoga maritima b subunits resulted in fully functional chimeras, judged by support of growth on nonfermentable carbon sources. Extension of the T. maritima sequence N-terminally to position 37 or C-terminally to position 124 resulted in slower but significant growth, indicating retention of some capacity for oxidative phosphorylation. Portions of the dimerization domain between 55 and 95 could be functionally replaced by segments from two other proteins having a hendecad pattern, the distantly related E subunit of the Chlamydia pneumoniae V-type ATPase and the unrelated Ag84 protein of Mycobacterium tuberculosis. Extension of such sequences to position 110 resulted in loss of function. None of the chimeras that incorporated the leucine zipper of yeast GCN4, or other left-handed coiled coils, supported oxidative phosphorylation, but substantial ATP-dependent proton pumping was observed in membrane vesicles prepared from cells expressing such chimeras. Characterization of chimeric soluble b polypeptides in vitro showed their retention of a predominantly helical structure. The T. maritima b subunit chimera melted cooperatively with a midpoint more than 20 °C higher than the normal E. coli sequence. The GCN4 construct melted at a similarly high temperature, but with much reduced cooperativity, suggesting a degree of structural disruption. These studies provide insight into the structural and sequential requirements for stator stalk function.

Role of the Asymmetry of the Homodimeric b2 Stator Stalk in the Interaction with the F1 Sector of Escherichia coli ATP Synthase

The b subunit dimer in the peripheral stator stalk of Escherichia coli ATP synthase is essential for enzyme assembly and the rotational catalytic mechanism. Recent protein chemical evidence revealed the dimerization domain of b to contain a novel two-stranded right-handed coiled coil with offset helices. Here, the existence of this structure in more complete constructs of b containing the C-terminal domain, and therefore capable of binding to the peripheral F1-ATPase, was supported by the more efficient formation of intersubunit disulfide bonds between cysteine residues that are proximal only in the offset arrangement and by the greater thermal stabilities of cross-linked heterodimers trapped in the offset configuration as opposed to homodimers with the helices trapped in-register. F1-ATPase binding analyses revealed the offset heterodimers to bind F1 more tightly than in-register homodimers. Mutations near the C terminus of b were incorporated specifically into either the N-terminally or the C-terminally shifted polypeptide, bN or bC, respectively, to determine the contribution of each position to F1 binding. Deletion of the last four residues of bN substantially weakened F1 binding, whereas the effect of the deletion in bC was modest. Similarly, benzophenone maleimide introduced at the C terminus of bN, but not bC, mediated cross-linking to the delta subunit of F1. These results imply that the polypeptide in the bN position is more important for F1 binding than the one in the bC position and illustrate the significance of the asymmetry of the b dimer in the enzyme.

RAVE Is Essential for the Efficient Assembly of the C Subunit with the Vacuolar H+-ATPase

The RAVE complex is required for stable assembly of the yeast vacuolar proton-translocating ATPase (V-ATPase) during both biosynthesis of the enzyme and regulated reassembly of disassembled V(1) and V(0) sectors. It is not yet known how RAVE effects V-ATPase assembly. Previous work has shown that V(1) peripheral or stator stalk subunits E and G are critical for binding of RAVE to cytosolic V(1) complexes, suggesting that RAVE may play a role in docking of the V(1) peripheral stalk to the V(0) complex at the membrane. Here we provide evidence for an interaction between the RAVE complex and V(1) subunit C, another subunit that has been assigned to the peripheral stalk. The C subunit is unique in that it is released from both V(1) and V(0) sectors during disassembly, suggesting that subunit C may control the regulated assembly of the V-ATPase. Mutants lacking subunit C have assembly phenotypes resembling that of RAVE mutants. Both are able to assemble V(1)/V(0) complexes in vivo, but these complexes are highly unstable in vitro, and V-ATPase activity is extremely low. We show that in the absence of the RAVE complex, subunit C is not able to stably assemble with the vacuolar ATPase. Our data support a model where RAVE, through its interaction with subunit C, is facilitating V(1) peripheral stalk subunit interactions with V(0) during V-ATPase assembly.

Mutations in the Atp1p and Atp3p subunits of yeast ATP synthase differentially affect respiration and fermentation in Saccharomyces cerevisiae

ATP1-111, a suppressor of the slow-growth phenotype of yme1Delta lacking mitochondrial DNA is due to the substitution of phenylalanine for valine at position 111 of the alpha-subunit of mitochondrial ATP synthase (Atp1p in yeast). The suppressing activity of ATP1-111 requires intact beta (Atp2p) and gamma (Atp3p) subunits of mitochondrial ATP synthase, but not the stator stalk subunits b (Atp4p) and OSCP (Atp5p). ATP1-111 and other similarly suppressing mutations in ATP1 and ATP3 increase the growth rate of wild-type strains lacking mitochondrial DNA. These suppressing mutations decrease the growth rate of yeast containing an intact mitochondrial chromosome on media requiring oxidative phosphorylation, but not when grown on fermentable media. Measurement of chronological aging of yeast in culture reveals that ATP1 and ATP3 suppressor alleles in strains that contain mitochondrial DNA are longer lived than the isogenic wild-type strain. In contrast, the chronological life span of yeast cells lacking mitochondrial DNA and containing these mutations is shorter than that of the isogenic wild-type strain. Spore viability of strains bearing ATP1-111 is reduced compared to wild type, although ATP1-111 enhances the survival of spores that lacked mitochondrial DNA.

ATP synthase – the structure of the stator stalk

ATP synthase synthesizes ATP from ADP and inorganic phosphate using a unique rotary mechanism whereby two subcomplexes move relative to each other, powered by a proton or sodium gradient. The non-rotating parts of the machinery are held together by the "stator stalk". The recent resolution of the structure of a major portion of the stator stalk of mitochondrial ATP synthase represents an important step towards a structural model for the ATP synthase holoenzyme.

The E and G Subunits of the Yeast V-ATPase Interact Tightly and Are Both Present at More Than One Copy per V1 Complex

The E and G subunits of the yeast V-ATPase are believed to be part of the peripheral or stator stalk(s) responsible for physically and functionally linking the peripheral V1 sector, responsible for ATP hydrolysis, to the membrane V0 sector, containing the proton pore. The E and G subunits interact tightly and specifically, both on a far Western blot of yeast vacuolar proteins and in the yeast two-hybrid assay. Amino acids 13-79 of the E subunit are critical for the E-G two-hybrid interaction. Different tagged versions of the G subunit were expressed in a diploid cell, and affinity purification of cytosolic V1 sectors via a FLAG-tagged G subunit resulted in copurification of a Myc-tagged G subunit, implying more than one G subunit was present in each V1 complex. Similarly, hemagglutinin-tagged E subunit was able to affinity-purify V1 sectors containing an untagged version of the E subunit from heterozygous diploid cells, suggesting that more than one E subunit is present. Overexpression of the subunit G results in a destabilization of subunit E similar to that seen in the complete absence of subunit G (Tomashek, J. J., Graham, L. A., Hutchins, M. U., Stevens, T. H., and Klionsky, D. J. (1997) J. Biol. Chem. 272, 26787-26793). These results are consistent with recent models showing at least two peripheral stalks connecting the V1 and V0 sectors of the V-ATPase and would allow both stalks to be based on an EG dimer.

FRET reveals changes in the F 1–stator stalk interaction during activity of F 1F 0-ATP synthase

A stator is proposed as necessary to prevent futile rotation of the F 1 catalytic sector of mitochondrial ATP synthase (mtATPase) during periods of ATP synthesis or ATP hydrolysis. Although the second stalk of mtATPase is generally believed to fulfil the role of a stator capable of withstanding the stress produced by rotation of the central rotor, there is little evidence to directly support this view. We show that interaction between two candidate proteins of the second stalk, OSCP and subunit b, fused at their C-termini to GFP variants and assembled into functional mtATPase can be monitored in mitochondria using fluorescence resonance energy transfer (FRET). Substitution of native OSCP with a variant containing a glycine 166 to asparagine (G166N) substitution yielded a metastable complex. In contrast to the enzyme containing native OSCP, FRET could be irreversibly lowered for the enzyme containing G166N at a rate that correlated closely with the rate of enzyme activity (ATP hydrolysis). The non-hydrolysable ATP analogue, AMP-PCP did not have this effect. We conclude that two candidate proteins of the stator stalk, OSCP and b, are subject to stresses during enzyme catalytic activity commensurate with their role as a part of a stator stalk.

The Molecular Neighborhood of Subunit 8 of Yeast Mitochondrial F1F0-ATP Synthase Probed by Cysteine Scanning Mutagenesis and Chemical Modification

The detailed membrane topography and neighboring polypeptides of subunit 8 in yeast mitochondrial ATP synthase have been determined using a combination of cysteine scanning mutagenesis and chemical modification. 46 single cysteine substitution mutants encompassing the length of the subunit 8 protein were constructed by site-directed mutagenesis. Expression of each cysteine variant in yeast lacking endogenous subunit 8 restored respiratory phenotype to cells and had little measurable effect on ATP hydrolase function. The exposure of each introduced cysteine residue to the aqueous environment was assessed in isolated mitochondria using the fluorescent thiol-modifying probe fluorescein 5-maleimide. The first 14 and last 13 amino acids of subunit 8 were accessible to fluorescein 5-maleimide in osmotically lysed mitochondria and are thus extrinsic to the lipid bilayer, indicating a 21-amino acid transmembrane span. The C-terminal region of subunit 8 was partially occluded by other ATP synthase subunits, especially in a small region surrounding Val-40 that was demonstrated to play an important role in maintaining the stability of the F(1)-F(0) interaction. Cross-linking using heterobifunctional reagents revealed the proximity of subunit 8 to subunits b, d, and f in the matrix and to subunits b, f, and 6 in the intermembrane space. A disulfide bridge was also formed between subunit 8(F7C) or (M10C) and residue Cys-23 of subunit 6, demonstrating a close interaction between these two hydrophobic membrane subunits and confirming the location of the N termini of each in the intermembrane space. We conclude that subunit 8 is an integral component of the stator stalk of yeast mitochondrial F(1)F(0)-ATP synthase.

Topology and proximity relationships of yeast mitochondrial ATP synthase subunit 8 determined by unique introduced cysteine residues.

We have used site-directed chemical labelling to demonstrate the membrane topology and to identify neighbouring subunits of subunit 8 (Y8) in yeast mitochondrial ATP synthase (mtATPase). Unique cysteine residues were introduced at the N or C-terminus of Y8 by site-directed mutagenesis. Expression and targeting to mitochondria in vivo of each of these variants in a yeast Y8 null mutant was able to restore activity to an otherwise nonfunctional ATP synthase complex. The position of each introduced cysteine relative to the inner mitochondrial membrane was probed with thiol-specific nonpermeant and permeant reagents in both intact and lysed mitochondria. The data indicate that the N-terminus of Y8 is located in the intermembrane space of mitochondria whereas the C-terminus is located within the mitochondrial matrix. The proximity of Y8 to other proteins of mtATPase was tested using heterobifunctional cross-linking reagents, each with one thiol-specific reactive group and one nonspecific, photoactivatible reactive group. These experiments revealed the proximity of the C-terminal domain of Y8 to subunits d and f, and that of the N-terminal domain to subunit f. It is concluded that Y8 possesses a single transmembrane domain which extends across the inner membrane of intact mitochondria. As subunit d is a likely component of the stator stalk of mitochondrial ATP synthase, we propose, on the basis of the observed cross-links, that Y8 may also be part of the stator stalk.

The oligomycin axis of mitochondrial ATP synthase: OSCP and the proton channel.

Oligomycin has long been known as an inhibitor of mitochondrial ATP synthase, putatively binding the F(o) subunits 9 and 6 that contribute to proton channel function of the complex. As its name implies, OSCP is the oligomycin sensitivity-conferring protein necessary for the intact enzyme complex to display sensitivity to oligomycin. Recent advances concerning the structure and mechanism of mitochondrial ATP synthase have led to OSCP now being considered a component of the peripheral stator stalk rather than a central stalk component. How OSCP confers oligomycin sensitivity on the enzyme is unknown, but probably reflects important protein-protein interactions made within the assembled complex and transmitted down the stator stalk, thereby influencing proton channel function. We review here our studies directed toward establishing the stoichiometry, assembly, and function of OSCP in the context of knowledge of the organization of the stator stalk and the proton channel.