Amylose Content Of Starch Research Articles

Differential fermentation of raw and processed high-amylose and waxy maize starches in the Simulator of the Human Intestinal Microbial Ecosystem (SHIME®)

This study aimed to evaluate the colonic fermentation profiles of both high-amylose and waxy maize starches in raw, cooked, and cooked-cooled forms, as measured by changes in short-chain fatty acid production and microbiota composition, using the Mucosal-Simulator of the Human Intestinal Microbial Ecosystem (SHIME). Adding starch (6 g/L) to basal feed promoted butyrate production in SHIME proximal and distal colon vessels. The cooked high-amylose starch induced the highest butyrate production in both colon vessels, while the cooked waxy starch induced the highest butyrate production in the distal but not the proximal colon vessel. All starch preparations increased Bifidobacteriaceae abundance in the proximal colon vessel (2- to 6-fold) and the Firmicutes/Bacteroidetes ratio. The cooked high-amylose starch increased Akkermansiaceae abundance in the distal (2-fold) but not the proximal colon vessel. The results indicate the cooking and cooling effect on starch fermentation outcome in successive colon regions depends on the starch amylose content.

Registration of ten soft red winter waxy wheat germplasm lines

AbstractWaxy wheat carries null alleles at the three Wx loci encoding the granule‐bound starch synthase I and produces endosperm starch composed of mostly amylopectin with less than 5% amylose. The USDA‐ARS developed and released 10 soft red winter (SRW) waxy wheat germplasm lines, SWQL‐K‐ABD‐1, SWQL‐K‐ABD‐2, SWQL‐K‐ABD‐3, SWQL‐K‐ABD‐4, SWQL‐K‐ABD‐5, SWQL‐W‐ABD‐1, SWQL‐W‐ABD‐2, SWQL‐W‐ABD‐3, SWQL‐W‐ABD‐4, SWQL‐W‐ABD‐5 (Reg. no. GP‐1061 to Reg. no. GP‐1070, PI 698615 to PI 698624), by the introgression of the null alleles at the Wx loci from a soft spring waxy wheat germplasm to two SRW wheat cultivars adapted to the eastern region of the United States. Ten waxy wheat germplasm lines were selected from BC4 or BC5 derivatives of the SRW wheat cultivars ‘Kristy’ and ‘Wilson’ (99ID490/5*Kristy and 99ID490/6*Wilson). The kernel hardness and starch amylose content of 10 SRW waxy wheat germplasm lines ranged from 34.1 to 63.1 and 2.5–7.2%, respectively, while those of wild types and SRW wheat parents carrying the functional alleles at the three Wx loci ranged from 33.9 to 60.4 and 26.8–27.0%, respectively. The starch of the waxy wheat germplasm lines exhibited a lower pasting temperature, higher peak viscosity, and lower setback value than the corresponding wild‐type wheat starch. These waxy wheat germplasm lines would be useful for the development of SRW wheat cultivars carrying different null alleles at the Wx loci that are adapted to the eastern region of the United States.

Valorization of unpopped Foxnut starch in stabilizing Pickering emulsion using OSA modification

Starch was isolated from unpopped fox nut (Euryale ferox) and the effect of octenyl succinic anhydride (OSA) concentration (1, 2 and 3%) on physiochemical, functional, pasting, rheological and structural properties of was examined. The amylose content of native starch (22.9%) was higher than the modified starch (13.7%) for 3% OSA treatment. The water absorption capacity (1.29–0.9 g/g) significantly reduced, while oil absorption capacity (0.15–0.61 g/g), solubility (5–48%) and swelling power (2.77–13.60 g/g) increased after modification. The modification also altered the pasting properties by increasing the peak viscosity and reducing the pasting temperature. The cooked gel of all starch showed shear-thinning flow behavior and dynamic rheology confirmed reduction in storage and loss modulus after modification. Modified starch became rougher and irregular in shape and showed type A pattern as confirmed by SEM and XRD. Soybean oil–in–water Pickering emulsions were prepared by ultrasonication (US, 30 and 40% amplitude for 2 and 4 min) using starch as particle stabilizer and major factors influencing emulsion stability were investigated. Pickering emulsions prepared at 30 and 40% amplitude for 4 min US, produced the smaller droplet size, stable up to 15 days. However, all OSA modified starches were able to separate the oil and water even after the size of droplets increased with storage. The microstructure of the Pickering emulsions confirmed that starch particles aggregated in a tightly packed layer at the oil-water interface.

Slowly digestible property of highly branched α-limit dextrins produced by 4,6-α-glucanotransferase from Streptococcus thermophilus evaluated in vitro and in vivo

Starch molecules are first degraded to slowly digestible α-limit dextrins (α-LDx) and rapidly hydrolyzable linear malto-oligosaccharides (LMOs) by salivary and pancreatic α-amylases. In this study, we designed a slowly digestible highly branched α-LDx with maximized α-1,6 linkages using 4,6-α-glucanotransferase (4,6-αGT), which creates a short length of α-1,4 side chains with increasing branching points. The results showed that a short length of external chains mainly composed of 1–8 glucosyl units was newly synthesized in different amylose contents of corn starches, and the α-1,6 linkage ratio of branched α-LDx after the chromatographical purification was significantly increased from 4.6% to 22.1%. Both in vitro and in vivo studies confirmed that enzymatically modified α-LDx had improved slowly digestible properties and extended glycemic responses. Therefore, 4,6-αGT treatment enhanced the slowly digestible properties of highly branched α-LDx and promises usefulness as a functional ingredient to attenuate postprandial glucose homeostasis.

Barnyard millet starch cross-linked at varying levels by sodium trimetaphosphate (STMP): Film forming, physico-chemical, pasting and thermal properties

Sodium trimetaphosphate (STMP) at different levels (1, 3 and 5%) was used to prepare cross-linked (CL) barnyard millet starch. The starches were studied for their physicochemical, pasting, steady shear rheological and thermal properties. Further, films were formulated from these starches and assessed for their functional and mechanical behavior. Amylose content of native starch (15%) decreased upon cross-linking (7.86–9.65%). CL starches had lower swelling power (SP) and solubility than native starch. CL starches showed lower peak (7049–9649 mPa.s), breakdown viscosities (BV) (1073–3172 mPa.s) but higher pasting temperature (PT) (79.7–80.8 °C) than native starch. Pasting properties were more affected for CL (5%) starch. Steady shear properties revealed lower yield stress (σo) values of CL starch pastes (1.39–2.37 Pa) than native starch paste (15.40 Pa). Flow behavior index was <1 for native and CL starches, thereby indicating their shear thinning behavior. Cross-linking increased gelatinization temperature, but decreased the enthalpy of gelatinization (ΔHgel) values. CL starch films exhibited lower water vapor permeability (WVP) and higher tensile strength (TS) and solubility than native starch films. CL (5%) starch film exhibited the lowest WVP (1.28 g.m/Pa.s.m2) and the highest TS (13.12 MPa) among films.

Wx alleles in rice: relationship with apparent amylose content of starch and a possible role in rice domestication

The Waxy locus of rice is a highly polymorphic region embedded with microsatellite repeats in the 5'UTR leader intron 1 region, 23-bp duplication (wx motif) in exon 2, SNPs in exons 4, 6 and 10, p-Sine-r2 element in intron 1 and TnR-1 element in inton 13. Of the 80 polymorphic sites detected on the Wx gene, 24 are located in p-Sine-r2 and TnR-1 elements, revealing a higher substitution rate of bases in these two regions. All the cultivars with chalky endosperm had the 5'-AGTTATA-3' haplotype in intron 1 and 'A' to 'G' substitution at ?497 in exon 4. The AAC of starch from grains of all the accessions showed strong correlation (r=0.967) with GBSS-I activity in the grains. Based on the polymorphic sites of the Waxy locus and the GBSS-I activities, six allelic variants were defined which included wx, Wxop, Wxb, Wxin, Wxa2 and Wxa1, respectively, corresponded to glutinous, very low, low, intermediate, highII and highI amylose classes. Phylogenetic tree developed from alignment matrix of nucleotide sequences of the Waxy locus identified wx, Wxb and Wxin alleles with japonica lineage of Oryza sativa and the Wxop, Wxa2 and Wxa1 with indica lineage.

High-amylose wheat bread with reduced in vitro digestion rate and enhanced resistant starch content

High amylose wheat flour (HAWF) is a relatively new food ingredient, with potential for enhanced nutritional functionality of slower digestion and greater resistant starch levels compared to wild-type wheat flour (WTWF) products. This study focusses on the role of amylose content in the baking process and eating qualities of bread, made using an industry-standard rapid dough method. DSC, XRD and polarized light microscopy were used to monitor changes of ordered structure in starch after baking, and showed more retained crystalline structure in the high-amylose wheat bread (HAWB) than wild-type wheat bread (WTWB). Moreover, HAWB had lower loaf volume, more dense crumb structure, as well as higher hardness than WTWB. These starch structural and local density features subsequently lead to bread made with 100% or 50% HAWF being more resistant to enzyme hydrolysis compared to WTWB. Resistant starch levels were significantly increased by ∼11 and 12 times in bread made using 100% HAWF with amylose content 71% and 84% respectively, and ∼6 times in bread prepared with 50% incorporation HAWF (84% AM) than WTWB. The nutritional and physical properties of bread are highly correlated to starch amylose content (AM), starch thermal properties and crumb hardness, with AM playing the leading role. This study identifies the structural basis for flour amylose content effects in baking and nutritional functionality and can help guide development of nutritionally-enhanced foods with HAWF.

Potentials of Edible Canna (Canna edulis Kerr) Starch for Bioplastic: A Review

Starch-based bioplastic was more economical and competitive compared to bacteria-based bioplastics (polylactic acid, polybutylene succinate, and polyhydroxyalkanoates) due to the starch variances and the availability in Indonesia, along with the simple techniques that can be applied. This review aimed to describe the potential and opportunities of edible canna starch as an alternative raw material of bioplastics production. Edible canna tuber productivity in Java, Indonesia, with a harvest age of about eight months reaches 30-49.4 tons/ha. It will produce a mature segment 70.2% of the total harvest weight. Edible canna tuber was a carbohydrate source that contains 88.10% starch with an advantage of 68% higher fiber and mineral content than other tubers. Furthermore, canna tuber starch contains amylose proportions of 35.0%. The high amylose content in canna starch is one of the properties that can position its function for developing packaging materials. The gelatinization process of canna starch requires a short time and low energy because of its large granule size (56 μm). A literature review of canna starch as an alternative of bioplastic raw materials needs to be carried out to obtain accurate data and information regarding treatment, use of additional materials, and characteristics of bioplastic products resulting from experimental studies so that they can be further implemented.

Characterization and Technological Potential of Underutilized Ancestral Andean Crop Flours from Ecuador

Ancestral Andean crop flours (ACF) from Ecuador such as camote (Ipomea Batatas), oca (Oxalis tuberosa), achira (Canna indica), mashua (Tropaeolum tuberosum), white arracacha (Arracacia xanthorrhiza), taro (Colocasia esculenta) and tarwi (Lupinus mutabilis sweet) were characterized in terms of physico-chemical and techno-functional properties in order to identify their potential as new alternative ingredients in food products. Flour from camote, oca, achira and arracacha showed a low protein content (&lt;5%), mashua and taro had ~9% and tarwi flour registered higher values than 52%. Carbohydrate content ranged from 56–77%, with the exception of tarwi, just reaching 6.9%. Starch content was relatively low in ACF but in taro and tarwi, starch practically constituted almost all the carbohydrates. The highest amylose content in starch, in decreasing order, was found in mashua, oca, tarwi and achira flours, the rest being ≤15%. Fiber content exceeded 10% in most crops, except for oca flour with 5.33%. Fat content was generally lower than 1%, except in tarwi with ~17%. All flours showed a gel-like behavior G′ &gt; G″, this being very similar in camote, achira and tarwi flours. The exception was taro with G′ &lt; G″. Mashua flour registered the highest value for phenol content (60.8 µg gallic acid equivalents/g of sample); the content of phenols was not exclusively responsible for the antioxidant activity, since flours with the highest activity were arracacha and tarwi, which presented the lowest phenol content among all flours. Principal component analyses (PCA) showed a high correlation between moisture, fiber, solubility and water absorption capacity, with viscoelastic behavior and total phenolic content; while starch content was correlated with melting temperature, poorly and inversely related to protein and fat. For PC1, achira, camote and taro flours were very similar, and different from oca and mashua flours. Tarwi showed its own characteristics according to PC1 and 2. Because of their properties, Andean crop flours could have a great potential for use in food technology.

Structural and Film-Forming Properties of Millet Starches: A Comparative Study

Millets are an underutilized and important drought-resistant crop, which are mainly used for animal feed. The major constituent in millet is starch (70%); millet starch represents an alternative source of starches like maize, rice, potato, etc. This encouraged us to isolate and characterize the starches from different millet sources and to evaluate the application of these starches in edible film preparation. In the present study, the physicochemical, morphological, and film-forming characteristics of millet starches were studied. The amylose content, swelling power, and solubility of millet starches ranged from 11.01% to 16.61%, 14.43 to 18.83 g/g, and 15.2% to 25.9%, respectively. Significant differences (p &lt; 0.05) were found with different pasting parameters, and the highest peak (2985 cP), breakdown (1618 cP), and final viscosity (3665 cP) were observed for barnyard, proso, and finger millet starch, respectively. Little millet starch achieved the highest pasting temperature. All starches showed A-type crystalline patterns, and relative crystallinity was observed at levels of 24.73% to 32.62%, with proso millet starch achieving the highest value. The light transmittance of starches varied from 3.3% to 5.2%, with proso millet starch showing the highest transparency. Significant differences (p &lt; 0.05) were observed in the water solubility, thickness, opacity and mechanical characteristics of films. The results of the present study facilitate a better assessment of the functional characteristics of millet starches for their possible applications in the preparation of starch films.

In vitro starch digestibility of buckwheat cultivars in comparison to wheat: The key role of starch molecular structure

The objective of this study was to compare the in vitro digestibility of different buckwheat and wheat starch cultivars and establish the relationship between digestibility and structure of buckwheat starch. Structure of starches were analyzed with size exclusion chromatography and fluorophore-assisted capillary electrophoresis. Results showed that the amylose content of Tartary buckwheat starch (TBS) and common buckwheat starch (CBS) was 3–4% lower than that of wheat starch. However, no significant difference in the digestibility was found between them. The fast digestion rate coefficient of TBS was negatively correlated with the amount of long amylopectin chains (24 < DP ≤ 36), and the total digested starch percentage of CBS was negatively correlated with the amount of medium-long amylopectin chains (13 < DP ≤ 24). This suggests that the digestibility of fully gelatinized starch had no association with the botanical sources but may be more influenced by starch structure.

Physicochemical Properties and the Digestibility of Cassava Root and Stem Starches Associated with Genotypes

AbstractCassava stems contain up to 40% starch (by dry mass) and are currently discarded as agricultural waste. The current study aims to understand the physicochemical traits of cassava stem and root starches for investigating trends in industrial cassava applications. In total, 11 traits of both cassava stem and root starches of 15 genotypes are investigated. All the examined traits of cassava root and stem starches vary by genotype. The amylose contents of root and stem starches are in the range of 19.0–33.0% and 18.44–34.51%, respectively. The resistant starch of root and stem starches are in the range of 1.72–17.72% and 4.42–13.37%, respectively. Only the starch content, solubility, and swelling power of root starches are significantly higher than those of stem starches. The root starch gel is more stable than the stem starch gel after the fourth and fifth freeze‐thaw cycles. Furthermore, principal component analysis calculated based on starch and amylose contents, degree of swelling, digestibility, and freeze‐thaw stability demonstrates that genotypes GW46, GW88, S1, E26, and GC49 gain higher scores than control varieties South China 12 and South China 205, which are the most favorable ones by farmers in China because of good root yields.

Microcalorimetric investigation of amylopectin branching and the content of amylose in potato starches

Hydroxyethylated starches are of particular interest for applications in infusion therapy because of their high volemic effect. The duration of this effect depends on the circulation time of the drug in the blood, i.e., the volume of circulating blood increases with an increase in the concentration, molecular weight and degree of polymer substitution. It is known that hydroxyethylated starches have a wide range of molecular weight and degree of substitution. This allows their solutions to circulate for a long time (up to 10 hours) in the bloodstream without leakage of the active substance into the interstitium of vital organs. The dependence of the melting point of the crystalline starch lamella on the number of glucose residues can be described using the modified Fox - Loshaek ratio, which takes into account the degree of branching of amylopectin molecules and the content of amylose in starch. We proposed an analytical expression for the evaluation of the degree of branching of amylopectin from potato starch based on microcalorimetric data. The proposed methodology allows the genotypes of potatoes with the highest degree of amylopectin branching and a minimum quantity of amylose in starch to be selected. Starches of such potato varieties can be used in the blood plasma substitutes production - hydroxyethylated starches that have good pharmacodynamic properties. Within the developed approach, it is possible to determine the effect of the degree of substitution on the thermodynamic properties of the studied starches through a change in the melting temperature of the lamella, Tm, hence estimating the main pharmacodynamic parameters of substituted starches.

Composition, Physicochemical Properties, and Uses of Acorn Starch

The major component of acorn is starch, which may amount up to 55% of the dry weight. Lack of systematic knowledge on acorn starch greatly hinders the further development of acorns as sustainable crops. This review aims to summarize the current knowledge of the isolation, chemical composition, physicochemical properties, and uses of acorn starches and to provide future research directions. The amylose content of the acorn starches is reported to vary in the range of 20–39%. Moisture content, lipid, ash, and protein contents of the acorn starches have been reported varying from 2.20 to 15.50%, 0.23 to 2.64%, 0.01 to 1.41%, and 0.01 to 6.7%, respectively. Thermal and pasting properties that have usually been determined using differential scanning calorimeter (DSC) and rapid viscoanalyzer (RVA) are also discussed in this article. Acorn starch has great potential for various food and nonfood applications due to the unique structural and functional features.

Genome-Wide Identification and Genetic Variations of the Starch Synthase Gene Family in Rice.

Starch is a major ingredient in rice, and the amylose content of starch significantly impacts rice quality. OsSS (starch synthase) is a gene family related to the synthesis of amylose and amylopectin, and 10 members have been reported. In the present study, a synteny analysis of a novel family member belonging to the OsSSIV subfamily that contained a starch synthase catalytic domain showed that three segmental duplications and multiple duplications were identified in rice and other species. Expression data showed that the OsSS gene family is involved in diverse expression patterns. The prediction of miRNA targets suggested that OsSS are possibly widely regulated by miRNA functions, with miR156s targeted to OsSSII-3, especially. Haplotype analysis exhibited the relationship between amylose content and diverse genotypes. These results give new insight and a theoretical basis for the improved amylose content and eating quality of rice.

Physicochemical and Rheological Properties of Cross‐Linked Litchi Kernel Starch and Its Application in Development of Bio‐Films

AbstractIn this study, starch from a non‐conventional source, that is, litchi is extracted and cross‐linked (CL) with varying concentrations (1%, 3%, and 5%) of sodium trimetaphosphate (STMP). The starches are characterized for their physicochemical, pasting, rheological, and thermal properties. Bio‐films are also prepared from these starches and analyzed for selected barrier and mechanical properties. The results indicate that an increase in cross linking agent concentration resulted in a significant decrease in amylose content, swelling power (SP), and solubility of starches. Peak viscosity (PV) and breakdown viscosity (BV) of CL starches are lower in comparison to native starch. Steady shear properties reveal that magnitudes of yield stress (σo) and consistency index (K) decrease upon increase in the concentration of cross linking reagent. CL starches exhibit significantly (p &lt; 0.05) higher transition temperatures than native starch. Native starch film shows water solubility of 43.66% while for films from CL starches, the values ranged between 35.12 and 41.53%. Significant (p &lt; 0.05) reduction in water vapor permeability (WVP) values of CL starch films (1.24–1.52 g m Pa−1 s−1 m−2) is observed in comparison to native (2.32 g m Pa−1 s−1 m−2) starch films. Cross linking significantly improves tensile strength (TS) of films, however, films elongation is lower (14.71–17.97%) than native starch film (19.88%).

Relationships between isolated sweetpotato starch properties and textural attributes of sweetpotato French fries

Sweetpotato French fry (SPFF) textures have been associated with dry matter and starch contents, but these do not fully account for all textural differences. This study investigated the relationships between the physicochemical properties of sweetpotato starch and textural attributes of sweetpotato fries. Starches from 16 sweetpotato genotypes that varied in dry matter content were isolated and analyzed. The amylose content, pasting temperatures and viscosities, and textural properties of equilibrated starch gels were measured. Correlational analysis was performed with the respective SPFF mechanical and sensory texture attributes. Sweetpotato starch amylose content ranged from 17.3% to 21.1%, and the pasting and gel textural properties varied significantly between starches. Starch from orange-fleshed sweetpotatoes had lower pasting temperatures than starches from yellow/cream-fleshed genotypes, 72.2± 2.0 and 75.5± 1.1°C, respectively. Notable inverse correlations were observed between the starch pasting temperature and perceived moistness (r=-0.63) and fibrousness (r=-0.70) of fries, whereas SPFF denseness was positively associated with starch pasting viscosity (r=0.60) and nonstarch alcohol-insoluble solids content. Fry textures were likely affected by cooked starch properties, which should be considered when selecting varieties for sweetpotato fries. PRACTICAL APPLICATION: Without the aid of a batter, sweetpotato French fries (SPFFs) tend to be soft and limp-undesirable attributes in a fried food. The physiochemical properties of starch, the most abundant component in sweetpotato fries, were further explored in this study to better understand the properties of sweetpotato starch that influence SPFF textures. These findings can be used by sweetpotato processors and breeders for developing new sweetpotato varieties that are designed for production of fried products with desirable textures.

Extraction and characterization of starch from anchote (Coccinia abyssinica): physico-chemical, functional, morphological and crystalline properties

Starch is a polysaccharide that has an important role in food and other industries. Anchote, a local name for “Coccinia abyssinica” is an indigenous tuber crop to Ethiopia supposed to contain considerable amount of starch. This study aims to extract starch from this plant using sodium metabisulfite (0.025, 0.075 and 0.125% w/v), sodium chloride (0.5, 1.0 and 1.5 M) and water. Anchote starch extracted by using 0.075% (w/v) sodium metabisulfite has presented the highest extraction yield (75.56%) on a dry weight basis. The values of moisture content, bulk density and amylose content of anchote starch were recorded as 11.6%, 0.51 g/mL and 32.14%, repectively. The color of anchote starch was measured in L*, a*, b* values and obtained 89.80, 0.025, 3.63, respectively and whiteness was 89.16%. Its granular shapes exhibited polygonal, semi-oval with some round. The swelling power and the solubility of anchote starch were ranged from 2.15 to 10.6 g/g and 0.51–19.15% respectively. Syneresis of anchote starch increased when pastes were stored at low temperatures and decline in paste clarity upon storage. Anchote starch exhibited gelatinization temperature; onset, peak and conclusion (68.94, 74.99 and 84.87 °C) respectively. Pasting properties of anchote starch; peak, trough, breakdown, final and setback viscosities were recorded as 4879 cP, 2101.7 cP, 2777 cP, 5636.1 cP, 3535 cP, respectively. Anchote starch showed type B crystalline pattern with 39.15% relative crystallinity. FTIR spectra of anchote starch bands were almost similar with potato starch. The results indicate that this starch may be an alternative source for the production of industrial products that may require starch.

Evaluation of indigenous aromatic rice cultivars from sub-Himalayan Terai region of India for nutritional attributes and blast resistance

Indigenous folk rice cultivars often possess remarkable but unrevealed potential in terms of nutritional attributes and biotic stress tolerance. The unique cooking qualities and blissful aroma of many of these landraces make it an attractive low-cost alternative to high priced Basmati rice. Sub-Himalayan Terai region is bestowed with great agrobiodiversity in traditional heirloom rice cultivars. In the present study, ninety-nine folk rice cultivars from these regions were collected, purified and characterized for morphological and yield traits. Based on traditional importance and presence of aroma, thirty-five genotypes were selected and analyzed for genetic diversity using micro-satellite marker system. The genotypes were found to be genetically distinct and of high nutritive value. The resistant starch content, amylose content, glycemic index and antioxidant potential of these genotypes represented wide variability and ‘Kataribhog’, ‘Sadanunia’, ‘Chakhao’ etc. were identified as promising genotypes in terms of different nutritional attributes. These cultivars were screened further for resistance against blast disease in field trials and cultivars like ‘Sadanunia’, ‘T4M-3-5’, ‘Chakhao Sampark’ were found to be highly resistant to the blast disease whereas ‘Kalonunia’, ‘Gobindabhog’, ‘Konkanijoha’ were found to be highly susceptible. Principal Component analysis divided the genotypes in distinct groups for nutritional potential and blast tolerance. The resistant and susceptible genotypes were screened for the presence of the blast resistant pi genes and association analysis was performed with disease tolerance. Finally, a logistic model based on phenotypic traits for prediction of the blast susceptibility of the genotypes is proposed with more than 80% accuracy.

Use of heat‐moisture treated maize starch to modify the properties of wheat flour and the quality of noodles

SummaryWaxy, normal and high‐amylose maize starches were subjected to heat‐moisture treatment (HMT) and then added to wheat flour (WF) in different ratios (1%, 5% and 10%). The properties of blends and their cooked noodles were studied to investigate the effects of HMT starches. The incorporation of HMT starch in WF led to an increase in swelling power, peak viscosity and breakdown and to a decrease in setback, thus inhibiting retrogradation, hence enhancing resultant noodle softness. Compared to the same addition ratio of native starch to WF, HMT starch led to higher tensile strength and extensibility in resultant noodles. WF with added HMT starch had higher resistant starch than with native starch. This study showed that addition of HMT maize starch has potential to bring nutritional benefits. However, it is necessary to select the proper blending ratio and amylose content of starch to add, in consideration of its effect on noodle quality.