Standard Single-mode Fiber Span Research Articles

Impact of the input OSNR on data-driven optical fiber channel modeling

The data-driven approach is promising for computationally efficient modeling of optical fiber channels. Here, for the first time to our knowledge, we investigate the impact of the input optical signal-to-noise ratio (OSNR) on the accuracy of data-driven modeling for optical fiber channels, based on a conditional generative adversarial network (cGAN). Initially, considering a single span of 80 km of standard single mode fiber (SSMF), we vary the launched optical power for the ease of emulating both linear and nonlinear transmission scenarios. When the input OSNR of a root raised cosine (RRC)-shaped 16 quadrature amplitude modulation signal with a roll-off factor of 0.1 varies, we identify that there occurs an OSNR threshold for accurately modeling a single span of 80 km of SSMF in order to reach the normalized mean square error of less than 0.02 in relevance to the traditional split-step Fourier method. The OSNR thresholds are 19 dB and 21 dB, respectively, under scenarios of linear and nonlinear transmissions. Moreover, we verify that the OSNR threshold of accurate modeling is insensitive to both the modulation format and the RRC shaping of the input signal. Furthermore, we find that the cascaded use of cGAN well-trained for the single SSMF span is capable of modeling the multiple-span SSMF transmission in the case that the input OSNR threshold of 22.6 dB is satisfied. We believe that the identification of the OSNR threshold for data-driven optical fiber channel modeling is useful for the accurate and efficient emulation of long-haul fiber optical transmission.

Spectral efficiency and performance improvement of coherent optical transmission system

This paper presents an orthogonal frequency division multiplexing (OFDM) for a long-haul optical transmission system with high-rate transferability to alleviate dispersion effects. In addition, we suggest combining polarization division multiplexing (PDM) with coherent OFDM (CO-OFDM) to increase spectral efficiency (SE). Based on OptiSystem (2021) version 18.0" software package, a 100 Gbps single-channel PDM-CO-OFDM transmission system is investigated using different modulation formats; bipolar phase keying (BPSK), quadrature phase shift keying (QPSK), Eight-Phase-Shift Keying modulators (8-PSK), and quadrature amplitude modulation (16-QAM). A 60 km span of standard single-mode fiber (SSMF) cable is employed in this investigation. The system's performance and spectral efficiency have been evaluated by comparing against the different modulation schemes. The outcomes that were got show that the BPSK modulation scheme has the longest transmission distance and requires a lesser level of optical signal to noise ratio (OSNR) at the receiver side. Concerning spectral efficiency, 16-QAM outperforms the others. Farther, the impact of employing ultra-low loss and large effective area fiber in reducing loss and nonlinear effects in the optical channel for 16-QAM modulation formats is examined. The result found that the system with advanced fiber has superior performance than the SSMF. The bit error rate (BER) of 0.033 (20% concatenated forward error correction (FEC) threshold) is used as a baseline.

Performance Evaluation of Digital Back-Propagation in the Presence of Power Excursion

An accurate power map is mandatory to evaluate the performance of optical fiber transmissions in the nonlinear transmission region. In this letter, we discuss the performance variation in dispersion unmanaged fiber links due to power excursions, overarching the fiber nonlinearity that imposes a fundamental limit on the capacity of optical fiber transmissions. After using digital back-propagation (DBP) in optical fiber transmissions, the performance degradation due to power excursions shows different characteristics, depending on the location of the power excursion. Further, due to the cascading effect of the nonlinear signal-noise interaction (NSNI), the power excursion on the latter spans exerts a greater impact than that on the front spans. We implement a polarization-multiplexed 16-QAM over 12 spans of standard single-mode fiber (SSMF) experiment. The experimental results verify our theoretical analyses that the received SNRs after DBP can be sensitive to the power excursion and its location.

High Capacity Converged Passive Optical Network and RoF-Based 5G+ Fronthaul Using 4-PAM and NOMA-CAP Signals

Network architectural changes to satisfy all the 5G+ mobile network specifications and requirements are necessary due to the popularization of streaming and cloud applications on omnipresent portable devices. The combination of massive installation of micro-cell antenna sites with the cloud access radio network (C-RAN) architecture has recently been nominated as a promising technology for high-capacity mobile fronthaul links, albeit at a high cost. An alternative approach for next-generation fronthaul networks is to utilize the already deployed passive optical networks (PONs) where wireless and wired services may coexist in a converged manner. Non-orthogonal multiple access (NOMA) modulation with multi-band carrierless amplitude and phase modulation (NOMA-CAP) has recently been investigated as a promising 5G+ modulation format candidate to increase the capacity and flexibility of future mobile networks. Here, we experimentally demonstrate the convergence of a NOMA-CAP wireless waveform with a single-carrier wired signal in a PON scenario using radio-over-fiber (RoF) technology. Specifically, fifteen NOMA-CAP bands, with two NOMA power levels to double the capacity, transmit 15 Gb/s multiplexed with a digital 10 Gb/s four-level pulse amplitude modulation (PAM-4) signal for downlink application. Two converged system implementations have been considered, first using electrical frequency division multiplexing (EFDM) and secondly using the hybrid EFDM-wavelength division multiplexing (EFDM-WDM). Successful transmission through a 25 km span of standard single-mode fiber is achieved with negligible transmission penalty for both proposed converged solutions.

High security OFDM-PON with a physical layer encryption based on 4D-hyperchaos and dimension coordination optimization.

In this article we have enhanced the security of an orthogonal frequency division multiplexed passive optical network (OFDM-PON) based on four dimensional (4D) encryption, including constellation, subcarrier, symbol and time, which is proposed for the first time in this paper. 4D-hyperchaotic mapping is used to generate four masking factors to achieve ultra-high security encryption in four different dimensions. During the encryption, dimension coordination optimization is adopted, which effectively reduces the time cost of the system and improves the encryption efficiency by 3 times. At the same time, probabilistic shaping (PS) technology is used to further optimize the system that has effectively improved the bit error performance by about 1 dB. The proposed encryption technique for OFDM-PON has been demonstrated successfully with the help of experiments. The generated OFDM signal is modulated by the quadrature amplitude modulation (QAM) technique, which transmitted 16 Gb/s data rate across a 25 km fiber span of standard single-mode fiber. The values of bit error rate (BER) and peak-to-average-power ratio (PAPR) are analyzed during the experiments, and the obtained results show that the proposed security-enhanced OFDM-PON has high sensitivity and security and can be well compatible with PS and OFDM technologies. The proposed scheme has very reliable security performance and also has excellent benefit improvement, which is very promising in the future PS-OFDM-PON.

Rate adaptive multilevel coded modulation with high coding gain in intensity modulation direct detection optical communication

A rate-adaptive multilevel coded modulation (RA-MLC) scheme based on fixed code length and a corresponding decoding scheme is proposed. RA-MLC scheme combines the multilevel coded and modulation technology with the binary linear block code at the transmitter. Bits division, coding, optional interleaving, and modulation are carried out by the preset rule, then transmitted through standard single mode fiber span equal to 100 km. The receiver improves the accuracy of decoding by means of soft information passing through different layers, which enhances the performance. Simulations are carried out in an intensity modulation-direct detection optical communication system using MATLAB®. Results show that the RA-MLC scheme can achieve bit error rate of 1E-5 when optical signal-to-noise ratio is 20.7 dB. It also reduced the number of decoders by 72% and realized 22 rate adaptation without significantly increasing the computing time. The coding gain is increased by 7.3 dB at BER=1E-3.

Theoretical Analysis of the Four-Wave Mixing Effect in Virtual Carrier-Assisted DD MB-OFDM Ultradense WDM Metropolitan Networks

A theoretical method (TM) to evaluate the four-wave mixing (FWM) power in multiband orthogonal frequency division multiplexing (MB-OFDM) ultradense wavelength division multiplexing (WDM) metropolitan networks using virtual carriers (VCs) and direct detection is proposed and validated numerically. It considers a band spacing of 3.125 GHz and 10-Gb/s data rate per band. A simplified TM (STM) to obtain the FWM power for MB-OFDM systems employing high-dispersion fiber is also proposed to relax the computation complexity. Both methods consider that FWM products generated from the mixing between two VCs and an OFDM band are dominant. Analytical expressions for the maximum allowed average power of the worst band (the band most impaired by FWM) are also derived. The TM and STM enable estimating the average power level per WDM channel corresponding to the threshold error vector magnitude (EVM) (threshold average power—TAP), where the threshold EVM is the maximum allowed EVM due to FWM, which induces a 2-dB EVM penalty to the EVM at the forward error correction threshold. Results show that, when a total data bit rate of 450 Gb/s is transmitted (nine WDM channels with five bands each) along the standard single-mode fiber (SSMF), the discrepancy between the numerical simulation-estimated and TM-estimated TAPs does not exceed 0.5 dB. By defining the upper bound of the power limit (UBPL) as the TAP obtained with 17 WDM channels, the discrepancy between the TM-estimated and STM-estimated UBPLs does not exceed 1 dB for transmission along up to 10 SSMF spans and for channel gaps up to 22.81 GHz.

The Benefit of Split Nonlinearity Compensation for Single-Channel Optical Fiber Communications

In this Letter we analyze the benefit of digital compensation of fiber nonlinearity, where the digital signal processing is divided between the transmitter and receiver. The application of the Gaussian noise model indicates that, where there are two or more spans, it is always beneficial to split the nonlinearity compensation. The theory is verified via numerical simulations, investigating transmission of single channel 50 GBd polarization division multiplexed 256-ary quadrature amplitude modulation over 100 km standard single mode fiber spans, using lumped amplification. For this case, the additional increase in mutual information achieved over transmitter- or receiver-side nonlinearity compensation is approximately 1 bit for distances greater than 2000 km. Further, it is shown, theoretically, that the SNR gain for long distances and high bandwidth transmission is 1.5 dB versus transmitter- or receiver-based nonlinearity compensation.

High Capacity/Spectral Efficiency 101.7-Tb/s WDM Transmission Using PDM-128QAM-OFDM Over 165-km SSMF Within C- and L-Bands

We experimentally demonstrate 101.7-Tb/s transmission over 355 km spans of standard single-mode fiber (SSMF) at a net spectral efficiency of 11 b/s/Hz. A total of 370 dense wavelength-division multiplexed (DWDM) channels spanning the optical C- and L-bands spaced at 25 GHz were used. Each 25-GHz channel were subdivided into four subbands, with each subband carrying a 73.5-Gb/s orthogonal frequency-division multiplexed (OFDM) signal modulated with polarization-division-multiplexing (PDM) 128-ary quadrature amplitude modulation (QAM) at each modulated subcarrier. This experiment was enabled by digital signal processing (DSP) pre-equalization of transmitter impairments, all Raman amplification, heterodyne coherent detection, and DSP postequalization of the channel and receiver impairments, including pilot-based phase noise compensation.

Transmission Performance of a 485-Gb/s CO-OFDM Superchannel With PDM-16QAM Subcarriers Over ULAF and SSMF-Based Links

We experimentally compare the transmission performance of a 485-Gb/s coherent optical orthogonal frequency-division-multiplexed (CO-OFDM) superchannel with PDM-16QAM subcarrier modulation over two types of fiber links, one based on ultra-large-area fiber (ULAF) spans, and the other on standard single-mode-fiber (SSMF) spans. Two amplification schemes, hybrid Raman/erbium-doped fiber amplifier (EDFA) and EDFA-only, are studied. We find that the optimum signal launch power is about 2 dB higher in ULAF than in SSMF for transmitting over 20 80-km spans under both amplification schemes. With EDFA-only amplification, the ULAF offers ~2-dB higher optimum Q2 factor than the SSMF after 1600-km transmission. With hybrid Raman/EDFA amplification, a transmission distance of 1600 km is achieved at Q2 = 9.2 dB by using the ULAF spans, which is 67% longer than that obtained with the SSMF spans.

Photonic Generation of UWB Pulses Using a Nonlinear Optical Loop Mirror and Its Distribution Over a Fiber Link

A novel approach is proposed for generating ultra-wideband (UWB) doublet pulses using a nonlinear optical loop mirror (NOLM). In this scheme, a polarization controller is used to shift the NOLM transfer function so that for a fixed operating condition (pump power), we can access the nonlinear portion of the transfer function. The UWB doublet pulses are then modulated using on-off keying and transmitted over a 10-km span of standard single-mode fiber to assess system performance. Error-free transmission is achieved with a power penalty of 1.5 dB compared with the back-to-back measurement.

Hybrid 10/40-G transmission on a 50-GHz grid through 2800 km of SSMF and seven optical add-drops

We experimentally demonstrate copolarized 42.7-Gb/s return-to-zero (RZ) differential quadrature phase-shift keying and 10.7-Gb/s RZ on-off keying wavelength-division-multiplexing transmission on a 50-GHz grid through 28 100-km spans of standard single-mode fiber in a 400-km recirculating loop. The loop contains an add-drop node on a 50-GHz channel grid.

/spl pi//2 alternate-phase ON-OFF keyed 40-Gb/s transmission on standard single-mode fiber

The authors demonstrate a transmission format based on pulse-over lapped ON-OFF keying (OOK) in which the optical phase of neighboring pulses alternates by π/2 within a return-to-zero (RZ) data stream. They experimentally show a simple means to realize π/2 alternate phase OOK and that an effective reduction in nonlinear transmission penalty from intrachannel four-wave mixing should be achieved in systems where strong pulse overlap occurs. Simulations are presented that predict an expected improvement in power tolerance of ∼2 dB over the 33% duty cycle RZ formal for a 40-Gb/s transmission in 15 × 80-km spans of standard single-mode fiber.

A high-speed demultiplexer based on a nonlinear optical loop mirror with a photonic crystal fiber

A 50-m-long photonic crystal fiber with zero-dispersion wavelength at 1552 nm is used as the nonlinear medium in a nonlinear optical loop-mirror-based demultiplexer. The successful demultiplexing of an 80-Gb/s optical time-division multiplexing signal transmitted through an 80-km span of standard single-mode fiber and the error-free demultiplexing from 160 Gb/s are achieved.

Hybrid wavelength-division-multiplexing systems for high-capacity digital and analog video trunking applications

A five-channel hybrid wavelength-division-multiplexing (WDM) system with one AM-VSB channel and four 2.5 Gb/s channels was demonstrated for video trunking and distribution applications. Two erbium doped fiber amplifiers (EDFAs) with saturated output power of +13 dBm were used for a standard single mode fiber span of 100 km. Error-free transmission for the digital channels and a carrier-to-noise ratio (CNR) higher than 50 dB for the AM-VSB channel could be achieved simultaneously.