Standard Peptide Research Articles

Strategies to verify equimolar peptide release in mass spectrometry-based protein quantification exemplified for apolipoprotein(a).

Quantitative protein mass spectrometry (MS) is ideally suited for precision diagnostics and for reference standardization of protein analytes. At the Leiden Apolipoprotein Reference Laboratory we apply MS strategies to obtain detailed insight into the protein-to-peptide conversion in order to verify that quantifier peptides are not partly concealed in miscleaved protein backbone. Apolipoprotein(a) (apo(a)) was digested in a non-optimal manner to enhance the number of miscleaved peptides that were identified by high resolution liquid chromatography tandem-MS measurements. The protein-to-peptide conversion was carefully mapped with specific attention for miscleaved peptides that contain an apo(a) quantifier peptide. Four different isotopologues of each apo(a)-quantifier peptide were applied to evaluate linearity of internal peptide standards during measurement of specific real-life samples. Two apo(a) quantifier peptides that were concealed in two different miscleaved peptides were included into a multiple reaction monitoring list in our targeted MS-based apo(a) quantifications to alert for potential protein digestion discrepancies. The presence of miscleaved peptides could be ruled out when applying our candidate reference measurement procedure (RMP) for apo(a) quantification. These data further corroborate the validity of our apo(a) candidate RMP as higher order method for certification of commercial Lp(a) tests that is endorsed by theInternational Federation of Clinical Chemistry and Laboratory Medicine. MS-based molecular detection and quantification of heterogeneous apo(a) proteoforms will allow manufacturers' transitioning from confounded lipoprotein(a) [Lp(a)] mass levels into accurate molar apo(a) levels.

A Streamlined High-Throughput LC-MS Assay for Quantifying Peptide Degradation in Cell Culture.

Peptides are widely used in biomaterials due to their easy of synthesis, ability to signal cells, and modify the properties of biomaterials. A key benefit of using peptides is that they are natural substrates for cell-secreted enzymes, which creates the possibility of utilizing cell-secreted enzymes for tuning cell-material interactions. However, these enzymes can also induce unwanted degradation of bioactive peptides in biomaterials, or in peptide therapies. Liquid chromatography-mass spectrometry (LC-MS) is a widely used, powerful methodology that can separate complex mixtures of molecules and quantify numerous analytes within a single run. There are several challenges in using LC-MS for the multiplexed quantification of cell-induced peptide degradation, including the need for non-degradable internal standards and the identification of optimal sample storage conditions. Another problem is that cell culture media and biological samples typically contain both proteins and lipids that can accumulate on chromatography columns and degrade their performance. However, removing these constituents can be expensive, time consuming, and increases sample variability. Here we show that directly injecting samples onto the LC-MS without any purification enables rapid and accurate quantification of peptide concentration, and that hundreds of LC-MS runs can be done on a single column without a significantly diminish the ability to quantify the degradation of peptide libraries. We also show that column failure is evident when hydrophilic peptides fail to be retained on the column, and this can be easily identified using standard peptide mixtures for column benchmarking. In total, this work introduces a simple and effective method for simultaneously quantifying the degradation of dozens of peptides in cell culture. By providing a streamlined and cost-effective method for the direct quantification of peptide degradation in complex biological samples, this work enables more efficient assessment of peptide stability and functionality, facilitating the development of advanced biomaterials and peptide-based therapies.

B-162 Evaluation of two commercially available stable isotope labeled whole-protein infliximab as internal standard for a clinical infliximab LC-MS/MS assay

Abstract Background Liquid chromatography tandem mass spectrometry (LC-MS/MS) based quantitation of infliximab has been successfully introduced in the clinical laboratory for therapeutic drug monitoring in recent years. Although stable isotope labeled (SIL)-peptide or non-labeled analog protein internal standards have been utilized, SIL-whole protein infliximab is generally considered to be the ideal internal standard for the correction of variations during sample preparation and analysis. In this study, we compared two commercially available SIL infliximab proteins, Sigma SILu™MAb and Promise Proteomics, for use in a clinical infliximab assay. Methods Both labeled infliximab proteins incorporate [13C6, 15N4]-arginine and [13C6, 15N2]-lysine in their sequence and are designed for use as an internal standard for LC-MS/MS based quantitative analysis of infliximab. For the comparison of their performance, a laboratory-developed LC-MS/MS clinical method was utilized. Linearity at 6 levels in triplicate with Remicade and 3 biosimilars (-abda, -axxq, and -dyyb), intra-assay precision at 2 levels (n=10/level), and method comparison (n=15) experiments were performed using each labeled infliximab as the internal standard. For sample preparation, internal standard was mixed with the serum sample, followed by protein precipitation with ammonium sulfate, protein denaturation, and tryptic digestion. The peptides YASESMSGIPSR (YASE) from infliximab and YASESMSGIPSR [13C6, 15N4] (SIL-YASE) from labeled infliximab were monitored by LC-MS/MS (Transcend TLX and TSQ Atlis, Thermo Scientific) and utilized for the quantitation of infliximab. Results For the linearity experiment (1-50 µg/mL), while utilizing the Promise Proteomics internal standard to assay had an accuracy range of 103.4% to 114.1% for Remicade, 100.6% to 108.2% for Infliximab-axxq, 103.0% to 110.9% for Infliximab-abda, 102.7% to 108.3% for Infliximab-dyyb. For the Sigma SILu™Mab SIL infliximab, the accuracy range was 92.1% to 99.6% for Remicade, 94.5% to 107.2% for Infliximab-axxq, 99.0% to 104.2% for Infliximab-abda, and 105.1% to 112.0% for Infliximab-dyyb. The mean overall error for Remicade and biosimilars was 0.203 µg/mL (2.0%) for Sigma SILu™Mab SIL infliximab and 0.193 µg/mL (2.0%) for Promise Proteomics internal standardization. Intra-day precision using each SIL infliximab was evaluated with Remicade at low and high levels (5 and 20 µg/mL). Using Promise Proteomics, the coefficient of variation (CV) was 2.8 and 2.2%, while using Sigma SILu™Mab the precision was 6.8 and 6.5% for the low and high levels, respectively. The regression analysis for the method comparison experiment had a correlation coefficient (r) of 0.9996 with a slope of 1.050 (95% confidence interval, 1.030-1.070) and intercept of -0.318 (95% confidence interval, -0.842 to 0.205). Conclusions The mean overall error for the linearity experiment was the same using Sigma SILu™Mab or Promise Proteomics as the internal standard. The Promise Proteomics product demonstrated a lower intra-assay CV compared to the Sigma SILu™Mab. The 2 products displayed a strong correlation during the method comparison experiment. Both Sigma SILu™Mab and Promise Proteomics labeled standards showed acceptable performance as an internal standard for LC-MS/MS based quantitative analysis of infliximab. Having both products available increases the robustness of LC-MS/MS clinical assays in the event of supply issues.

A robust polymetallic-coated sheathless interface with high acid and alkali resistance for coupling capillary electrophoresis with mass spectrometry

A robust interface for coupling capillary electrophoresis (CE) to mass spectrometry (MS) was critical to maintain high separation efficiency of CE while achieving high sensitivity of MS. Current interfaces often suffer from problems such as reproducibility and ruggedness. For this purpose, a new polymetallic-coated sheathless interface was developed for the coupling of CE with MS. The electrical contact of the interface was achieved by etching one end of the fused silica capillary into a tapered tip using hydrofluoric acid (HF) solution, and then depositing a thin layer of chromium followed by a layer of platinum on it via physical vapor deposition technique. The performance of the new sheathless interface was systematically evaluated for the effect of flow rate and electrospray ionization (ESI) voltage on MS signal intensity, as well as the sample loading volume on CE separation efficiency and repeatability by using peptide standards and tryptic digest of bovine serum albumin (BSA). The interface was capable of generating stable electrospray even at ultra-low flow rate of 12.2 nL/min. In addition, the acid and alkali resistance of the polymetallic- coated emitter was tested by immersing it into 1M HCL and 1M NaOH solution, respectively. The results showed that polymetallic coating was still intact even after continuous immersion in the alkaline solution for 8 days (192 h) and a longer period in the acidic solution, indicating its excellent chemical stability. All the experimental results indicated that the sheathless interface fabricated by the new method in this study was robust and stable, making it promising for both sensitive and robust CE-MS sample analysis.

Phylogenomic and synteny analysis of BAHD and SCP/SCPL gene families reveal their evolutionary histories in plant specialized metabolism.

Plant chemical diversity is largely owing to a number of enzymes which catalyse reactions involved in the assembly, and in the subsequent chemical modifications, of the core structures of major classes of plant specialized metabolites. One such reaction is acylation. With this in mind, to study the deep evolutionary history of BAHD and the serine-carboxypeptidase-like (SCPL) acyltransferase genes, we assembled phylogenomic synteny networks based on a large-scale inference analysis of orthologues across whole-genome sequences of 126 species spanning Stramenopiles and Archaeplastida, including Arabidopsis thaliana, tomato (Solanum lycopersicum) and maize (Zea mays). As such, this study combined the study of genomic location with changes in gene sequences. Our analyses revealed that serine-carboxypeptidase (SCP)/serine-carboxypeptidase-like (SCPL) genes had a deeper evolutionary origin than BAHD genes, which expanded massively on the transition to land and with the development of the vascular system. The two gene families additionally display quite distinct patterns of copy number variation across phylogenies as well as differences in cross-phylogenetic syntenic network components. In unlocking the above observations, our analyses demonstrate the possibilities afforded by modern phylogenomic (syntenic) networks, but also highlight their current limitations, as demonstrated by the inability of phylogenetic methods to separate authentic SCPL acyltransferases from standard SCP peptide hydrolases.This article is part of the theme issue 'The evolution of plant metabolism'.

Targeted MRM-analysis of plasma proteins in frozen whole blood samples from patients with COVID-19: a retrospective study.

The COVID-19 pandemic has exposed a number of key challenges that need to be urgently addressed. Mass spectrometric studies of blood plasma proteomics provide a deep understanding of the relationship between the severe course of infection and activation of specific pathophysiological pathways. Analysis of plasma proteins in whole blood may also be relevant for the pandemic as it requires minimal sample preparation. The frozen whole blood samples were used to analyze 203 plasma proteins using multiple reaction monitoring (MRM) mass spectrometry and stable isotope-labeled peptide standards (SIS). A total of 131 samples (FRCC, Russia) from patients with mild (n=41), moderate (n=39) and severe (n=19) COVID-19 infection and healthy controls (n=32) were analyzed. Levels of 94 proteins were quantified and compared. Significant differences between all of the groups were revealed for 44 proteins. Changes in the levels of 61 reproducible COVID-19 markers (SERPINA3, SERPING1, ORM1, HRG, LBP, APOA1, AHSG, AFM, ITIH2, etc.) were consistent with studies performed with serum/plasma samples. The best-performing classifier built with 10 proteins achieved the best combination of ROC-AUC (0.97-0.98) and accuracy (0.90-0.93) metrics and distinguished patients from controls, as well as patients by severity. Here, for the first time, frozen whole blood samples were used for proteomic analysis and assessment of the status of patients with COVID-19. The results obtained with frozen whole blood samples are consistent with those from plasma and serum.

Contactin proteins in cerebrospinal fluid show different alterations in dementias.

The proteins contactin (CNTN) 1-6 are synaptic proteins for which there is evidence that they are dysregulated in neurodegenerative dementias. Less is known about CNTN changes and differences in cerebrospinal fluid (CSF) of dementias, which can provide important information about alterations of the CNTN network and be of value for differential diagnosis. We developed a mass spectrometry-based multiple reaction monitoring (MRM) method to simultaneously determine all six CNTNs in CSF samples using stable isotope-labeled standard peptides. The analytical performance of the method was evaluated for peptide stability, dilution linearity and precision. CNTNs were measured in 82 CSF samples from patients with Alzheimer's disease (AD, n = 19), behavioural variant frontotemporal dementia (bvFTD, n = 18), Parkinson's disease dementia/dementia with Lewy bodies (PDD/DLB, n = 18) and non-neurodegenerative controls (n = 27) and compared with core AD biomarkers. The MRM analysis revealed down-regulation of CNTN2 (fold change (FC) = 0.77), CNTN4 (FC = 0.75) and CNTN5 (FC = 0.67) in bvFTD and CNTN3 (FC = 0.72), CNTN4 (FC = 0.75) and CNTN5 (FC = 0.73) in PDD/DLB compared to AD. CNTN levels strongly correlated with each other in controls (r = 0.73), bvFTD (r = 0.86) and PDD/DLB (r = 0.70), but the correlation was significantly lower in AD (r = 0.41). CNTNs in AD did not show correlation even with core AD biomarkers. Combined use of CNTN1-6 levels increased diagnostic performance of AD core biomarkers. Our data show CNTNs differentially altered in dementias and indicate CNTN homeostasis being selectively dysregulated in AD. The combined use of CNTNs with AD core biomarkers might help to improve differential diagnosis.

Mixed Stereochemistry Macrocycle Acts as a Helix-Stabilizing Peptide N-Cap.

Interactions between proteins and α-helical peptides have been the focus of drug discovery campaigns. However, the large interfaces formed between multiple turns of an α-helix and a binding protein represent a significant challenge to inhibitor discovery. Modified peptides featuring helix-stabilizing macrocycles have shown promise as inhibitors of these interactions. Here, we tested the ability of N-terminal to side-chain thioether-cyclized peptides to inhibit the α-helix binding protein Mcl-1, by screening a trillion-scale library. The enriched peptides were lariats featuring a small, four-amino-acid N-terminal macrocycle followed by a short linear sequence that resembled the natural α-helical Mcl-1 ligands. These "Heliats" (helical lariats) bound Mcl-1 with tens of nM affinity, and inhibited the interaction between Mcl-1 and a natural peptide ligand. Macrocyclization was found to stabilize α-helical structures and significantly contribute to affinity and potency. Yet, the 2nd and 3rd positions within the macrocycle were permissible to sequence variation, so that a minimal macrocyclic motif, of an N-acetylated d-phenylalanine at the 1st position thioether connected to a cysteine at the 4th, could be grafted into a range of peptides and stabilize helical conformations. We found that d-stereochemistry is more helix-stabilizing than l- at the 1st position in the motif, as the d-amino acid can utilize polyproline II torsional angles that allow for more optimal intrachain hydrogen bonding. This mixed stereochemistry macrocyclic N-cap is synthetically accessible, requiring only minor modifications to standard solid-phase peptide synthesis, and its compatibility with peptide screening can provide ready access to helix-focused peptide libraries for de novo inhibitor discovery.

Fast and deep phosphoproteome analysis with the Orbitrap Astral mass spectrometer

Owing to its roles in cellular signal transduction, protein phosphorylation plays critical roles in myriad cell processes. That said, detecting and quantifying protein phosphorylation has remained a challenge. We describe the use of a novel mass spectrometer (Orbitrap Astral) coupled with data-independent acquisition (DIA) to achieve rapid and deep analysis of human and mouse phosphoproteomes. With this method, we map approximately 30,000 unique human phosphorylation sites within a half-hour of data collection. The technology is benchmarked to other state-of-the-art MS platforms using both synthetic peptide standards and with EGF-stimulated HeLa cells. We apply this approach to generate a phosphoproteome multi-tissue atlas of the mouse. Altogether, we detect 81,120 unique phosphorylation sites within 12 hours of measurement. With this unique dataset, we examine the sequence, structural, and kinase specificity context of protein phosphorylation. Finally, we highlight the discovery potential of this resource with multiple examples of phosphorylation events relevant to mitochondrial and brain biology.

An enrichment strategy based on hydrophobic tagging and reversed-phase chromatographic separation for the analysis of lysine-containing peptides

Lysine (K) is widely used in the design of lysine-targeted crosslinkers, structural elucidation of protein complexes, and analysis of protein-protein interactions. In "shotgun" proteomics, which is based on liquid chromatography-tandem mass spectrometry (LC-MS/MS), proteins from complex samples are enzymatically digested, generating thousands of peptides and presenting significant challenges for the direct analysis of K-containing peptides. In view of the lack of effective methods for the enrichment of K-containing peptides, this work developed a method which based on a hydrophobic-tag-labeling reagent C10-S-S-NHS and reversed-phase chromatography (termed as HYTARP) to achieve the efficient enrichment and identification of K-containing peptides from complex samples. The C10-S-S-NHS synthesized in this work successfully labeled standard peptides containing various numbers of K and the labeling efficiency achieved up to 96% for HeLa cell protein tryptic digests. By investigating the retention behavior of these labeled peptides in C18 RP column, we found that most K-labeled peptides were eluted once when acetonitrile percentage reached 57.6% (v/v). Further optimization of the elution gradient enabled the efficient separation and enrichment of the K-labeled peptides in HeLa digests via a stepwise elution gradient. The K-labeled peptides accounted for 90% in the enriched peptides, representing an improvement of 35% compared with the number of peptides without the enrichment. The dynamic range of proteins quantified from the enriched K-containing peptides spans 5-6 orders of magnitude, and realized the detection of low-abundance proteins in the complex sample. In summary, the HYTARP strategy offers a straightforward and effective approach for reducing sample complexity and improving the identification coverage of K-containing peptides and low-abundance proteins.

Authenticity discrimination for Galli Gigerii Endothelium Corneum based on UPLC-MS/MS and peptidomics

Peptidomics was employed to systematically analyze the characteristic peptides in Galli Gigerii Endothelium Corneum and its adulterants and establish a method for distinguishing Galli Gigerii Endothelium Corneum from its adulterants, including the gizzard membranes from ducks, geese, and pigeons. UPLC-Q-Exactive Orbitrap-MS was combined with multivariate statistical analysis to analyze the peptides in Galli Gigerii Endothelium Corneum and its adulterants. The structures of peptides were identified by pNovo combined with manual recognition of spectra, and synthetic peptide standards were used for validation. LC-MS/MS was used to optimize the sample pre-processing conditions, including the extraction procedure, extraction time, extraction solvents, and solvent volumes, for the characteristic peptide LESY in Galli Gigerii Endothelium Corneum. Multiple reaction monitoring(MRM) in the ESI~+ mode with m/z 511.24→269.11 and 511.24→243.13 as detection ions was employed for qualitative and quantitative analyses. The established UPLC-MS/MS method demonstrated good specificity, stability, and durability. The content of LESY in 16 batches of Galli Gigerii Endothelium Corneum samples ranged from 55.03 to 113.36 μg·g~(-1). Additionally, a qualitative detection method for the common peptide RDPVLVSR in adulterants was established with m/z 471.28→785.45 and 471.28→670.41 as the detection ions. This study established a convenient, rapid, and accurate detection method for the characteristic peptides in Galli Gigerii Endothelium Corneum and its adulterants. The method possesses good specificity, stability, and durability, providing a valuable reference for the identification and quality control of Galli Gigerii Endothelium Corneum and other traditional Chinese medicines derived from animal sources.

A "One-Step" Strategy for the Global Characterization of Core-Fucosylated Glycoproteome.

Core fucosylation, a special type of N-linked glycosylation, is important in tumor proliferation, invasion, metastatic potential, and therapy resistance. However, the core-fucosylated glycoproteome has not been extensively profiled due to the low abundance and poor ionization efficiency of glycosylated peptides. Here, a "one-step" strategy has been described for protein core-fucosylation characterization in biological samples. Core-fucosylated peptides can be selectively labeled with a glycosylated probe, which is linked with a temperature-sensitive poly(N-isopropylacrylamide) (PNIPAM) polymer, by mutant endoglycosidase (EndoF3-D165A). The labeled probe can be further removed by wild-type endoglycosidase (EndoF3) in a traceless manner for mass spectrometry (MS) analysis. The feasibility and effectiveness of the "one-step" strategy are evaluated in bovine serum albumin (BSA) spiked with standard core-fucosylated peptides, H1299, and Jurkat cell lines. The "one-step" strategy is then employed to characterize core-fucosylated sites in human lung adenocarcinoma, resulting in the identification of 2494 core-fucosylated sites distributed on 1176 glycoproteins. Further data analysis reveals that 196 core-fucosylated sites are significantly upregulated in tumors, which may serve as potential drug development targets or diagnostic biomarkers. Together, this "one-step" strategy has great potential for use in global and in-depth analysis of the core-fucosylated glycoproteome to promote its mechanism research.

Mechanistic insights on the antibacterial action of the kyotorphin peptide derivatives revealed by in vitro studies and Galleria mellonella proteomic analysis

ObjectivesThe selected kyotorphin derivatives were tested to improve their antimicrobial and antibiofilm activity. The antimicrobial screening of the KTP derivatives were ascertained in the representative strains of bacteria, including Streptococcus pneumoniae, Streptococcus pyogenes, Escherichia coli and Pseudomonas aeruginosa. MethodsKyotorphin derivatives, KTP-NH2, KTP–NH2–DL, IbKTP, IbKTP-NH2, MetKTP-DL, MetKTP-LD, were designed and synthesized to improve lipophilicity and resistance to enzymatic degradation. Peptides were synthesized by standard solution or solid-phase peptide synthesis and purified using RP-HPLC, which resulted in >95 % purity, and were fully characterized by mass spectrometry and 1H NMR. The minimum inhibitory concentrations (MIC) determined for bacterial strains were between 20 and 419 μM. The direct effect of IbKTP-NH2 on bacterial cells was imaged using scanning electron microscopy. The absence of toxicity, high survival after infection and an increase in the hemocytes count was evaluated by injections of derivatives in Galleria mellonella larvae. Proteomics analyses of G. mellonella hemolymph were performed to investigate the underlying mechanism of antibacterial activity of IbKTP-NH2 at MIC. ResultsIbKTP-NH2 induces morphological changes in bacterial cell, many differentially expressed proteins involved in DNA replication, synthesis of cell wall, and virulence were up-regulated after the treatment of G. mellonella with IbKTP-NH2. ConclusionWe suggest that this derivative, in addition to its physical activity on the bacterial membranes, can elicit a cellular and humoral immune response, therefore, it could be considered for biomedical applications.

Development of an oxazole-based cleavable linker for peptides

We report the development of a new oxazole-based cleavable linker to release peptides from attached cargo. Oxazoles are stable to most reaction conditions, yet they can be rapidly cleaved in the presence of single-electron oxidants like cerium ammonium nitrate (CAN). An oxazole linker could be synthesized and attached to peptides through standard solid-phase peptide coupling reactions. Cleavage of these peptide-oxazole conjugates is demonstrated on a broad scope of peptides containing various natural and unnatural amino acids. These results represent the first example of a peptide-based linker that is cleaved through single-electron oxidation. The oxazole is also demonstrated to be a suitable linker for both the release of a peptide from a conjugated small molecule and the orthogonal release of cargo from a peptide containing multiple cleavable linkers. Oxazole linkers could serve as a promising tool for peptide screening platforms such as peptide-encoded libraries.

A Simplified Proteomics LC-MRM-MS Assay for Determination of apoE Genotypes in Plasma Samples.

Apolipoprotein E (apoE), a polymorphic plasma protein, plays a pivotal role in lipid transportation. The human apoE gene possesses three major alleles (ε2, ε3, and ε4), which differ by single amino acid (cysteine to arginine) substitutions. The ε4 allele represents the primary genetic risk factor for Alzheimer's disease (AD), whereas the ε2 allele protects against the disease. Knowledge of a patient's apoE genotype has high diagnostic value. A recent study has introduced an LC-MRM-MS-based proteomic approach for apoE isoform genotyping using stable isotope-labeled peptide internal standards (SIS). Here, our goal was to develop a simplified LC-MRM-MS assay for identifying apoE genotypes in plasma samples, eliminating the need for the use of SIS peptides. To determine the apoE genotypes, we monitored the chromatographic peak area ratios of isoform-specific peptides relative to a peptide that is common to all apoE isoforms. The assay results correlated well with the standard TaqMan allelic discrimination assay, and we observed a concordance between the two methods for all but three out of 172 samples. DNA sequencing of these three samples has confirmed that the results of the LC-MRM-MS method were correct. Thus, our simplified UPLC-MRM-MS assay is a feasible and reliable method for identifying apoE genotypes without using SIS internal standard peptides. The approach can be seamlessly incorporated into existing quantitative proteomics assays and kits, providing additional valuable apoE genotype information. The principle of using signal ratios of the protein isoform-specific peptides to the peptide common for all of the protein isoforms has the potential to be used for protein isoform determination in general.

Evaluation of different isotope dilution mass spectrometry strategies for the characterization of naturally abundant and isotopically labelled peptide standards

Natural abundance and isotopically labelled tryptic peptides are routinely employed as standards in quantitative proteomics. The certification of the peptide content is usually carried out by amino acid analysis using isotope dilution mass spectrometry (IDMS) after the acid hydrolysis of the peptide. For the validation and traceability of the amino acid analysis procedure, expensive certified peptides must be employed. In this work we evaluate different IDMS alternatives which will reduce the amount of certified peptide required for validation of the amino acid analysis procedure. In this context, the characterization of both natural and isotopically labelled synthetic angiotensin I peptides was carried out. First, we applied a fast procedure for peptide hydrolysis based on microwave-assisted digestion and employed two certified peptide reference materials SRM 998 angiotensin I and CRM 6901-b C-peptide for validation of the hydrolysis procedure. The amino acids proline, leucine, isoleucine, valine, tyrosine, arginine and phenylalanine were evaluated for their suitability for peptide certification by IDMS by both liquid chromatography with tandem mass spectrometry (LC–MS/MS) and gas chromatography with mass spectrometry (GC)–MS/MS. Then, natural angiotensin I and 13C1-labelled angiotensin I were synthesized in-house and purified by preparative liquid chromatography. The concentration of the 13C1-labelled angiotensin I peptide was established by reverse IDMS in its native form using SRM 998 angiotensin I as reference. The concentration of the natural synthesized peptide was determined by IDMS both using the 13C1-labelled peptide in its native form and by amino acid analysis showing comparable results. Finally, the synthetic naturally abundant angiotensin I peptide was employed as “in-house” standard for the validation of subsequent peptide characterization procedures. Therefore, the novelty of this work relies on, first, the development of a faster hydrolysis procedure assisted by focused microwaves, providing complete hydrolysis in 150 min, and secondly, a validation strategy combining GC–MS and LC–MS/MS that allowed us to certify the purity of an in-house-synthesized peptide standard that can be employed as quality control in further experiments.Graphical abstract

Quantitative mass spectrometry with ¹⁸O labelling as an alternative approach for determining protease activity: an example of trypsin

SCIENTIFIC RELEVANCE. In the quality control of proteolytic enzyme components of medicinal products, the activity of proteases is determined by spectrophotometry, which involves mea­suring the amidase or esterase activity using a synthetic substrate and the proteolytic activity using the Anson method. These methods require special substrates and have low sensitivity; their specificity may be insufficient, which may lead to serious errors. Quantitative mass spectrometry is an alternative approach to protease activity assays, which involves adding an isotope-labelled peptide to hydrolysates of the test enzyme. This approach allows determining the activity of proteases, notably, by the hydrolysis of specific peptide bonds, while simulta­neously confirming the identity and specificity of the test sample. Quantitative mass spectrometry has high sensitivity and does not require special substrates.AIM. This study aimed to investigate the possibility of enzymatic activity assay and enzyme identification by quantitative mass spectrometry with ¹⁸O labelling through an example of trypsin with casein.MATERIALS AND METHODS. The study used trypsin, casein, and H₂¹⁸O (Izotop, Russia). Peptide separation was performed using an Agilent 1100 HPLC system; mass spectra were obtained using a Bruker Ultraflex II MALDI-TOF/TOF mass spectrometer. Quantitative mass spectrometry was performed using a standard peptide, which was obtained from casein by tryptic digestion and HPLC purification. For ¹⁸O labelling, the authors dried the peptide and incubated it in H₂¹⁸О water. The quantitative analysis of the product was carried out using MALDI-TOF mass spectrometry. The authors used quantitative mass spectrometry with ¹⁸O labelling to determine enzymatic activity and calculate the Michaelis constant (KM).RESULTS. Following the tryptic digestion of casein, the authors identified the fragments corre­sponding to casein chains. The authors produced the isotope-labelled standard peptide and calculated its concentration using mass spectrometry. The authors determined the rate of casein digestion by trypsin and calculated the KM for trypsin, which was 13.65±0.60 μM. The standard deviation for repeated measurements showed that the mass-spectrometric method had a lower error of measurement than the spectrophotometric method. The sensitivity threshold for the mass-spectrometric method was 0.50±0.08 μM.CONCLUSIONS. The results obtained with trypsin confirm the possibility of enzymatic activity determination by the proposed method of quantitative mass spectrometry with ¹⁸O labelling. According to the sensitivity evaluation results, this method can be used for the simultaneous determination of enzyme activity, identity, and specificity. The proposed mass spectrometry approach is universal, it does not require expensive materials and reagents, and it can be easily adapted to determine the activity of virtually any protease.

Kinase inhibitor pulldown assay (KiP) for clinical proteomics

Protein kinases are frequently dysregulated and/or mutated in cancer and represent essential targets for therapy. Accurate quantification is essential. For breast cancer treatment, the identification and quantification of the protein kinase ERBB2 is critical for therapeutic decisions. While immunohistochemistry (IHC) is the current clinical diagnostic approach, it is only semiquantitative. Mass spectrometry-based proteomics offers quantitative assays that, unlike IHC, can be used to accurately evaluate hundreds of kinases simultaneously. The enrichment of less abundant kinase targets for quantification, along with depletion of interfering proteins, improves sensitivity and thus promotes more effective downstream analyses. Multiple kinase inhibitors were therefore deployed as a capture matrix for kinase inhibitor pulldown (KiP) assays designed to profile the human protein kinome as broadly as possible. Optimized assays were initially evaluated in 16 patient derived xenograft models (PDX) where KiP identified multiple differentially expressed and biologically relevant kinases. From these analyses, an optimized single-shot parallel reaction monitoring (PRM) method was developed to improve quantitative fidelity. The PRM KiP approach was then reapplied to low quantities of proteins typical of yields from core needle biopsies of human cancers. The initial prototype targeting 100 kinases recapitulated intrinsic subtyping of PDX models obtained from comprehensive proteomic and transcriptomic profiling. Luminal and HER2 enriched OCT-frozen patient biopsies subsequently analyzed through KiP-PRM also clustered by subtype. Finally, stable isotope labeled peptide standards were developed to define a prototype clinical method. Data are available via ProteomeXchange with identifiers PXD044655 and PXD046169.

Complementarity of two proteomic data analysis tools in the identification of drug-metabolising enzymes and transporters in human liver.

Several software packages are available for the analysis of proteomic LC-MS/MS data, including commercial (e.g. Mascot/Progenesis LC-MS) and open access software (e.g. MaxQuant). In this study, Progenesis and MaxQuant were used to analyse the same data set from human liver microsomes (n = 23). Comparison focussed on the total number of peptides and proteins identified by the two packages. For the peptides exclusively identified by each software package, distribution of peptide length, hydrophobicity, molecular weight, isoelectric point and score were compared. Using standard cut-off peptide scores, we found an average of only 65% overlap in detected peptides, with surprisingly little consistency in the characteristics of peptides exclusively detected by each package. Generally, MaxQuant detected more peptides than Progenesis, and the additional peptides were longer and had relatively lower scores. Progenesis-specific peptides tended to be more hydrophilic and basic relative to peptides detected only by MaxQuant. At the protein level, we focussed on drug-metabolising enzymes (DMEs) and transporters, by comparing the number of unique peptides detected by the two packages for these specific proteins of interest, and their abundance. The abundance of DMEs and SLC transporters showed good correlation between the two software tools, but ABC showed less consistency. In conclusion, in order to maximise the use of MS datasets, we recommend processing with more than one software package. Together, Progenesis and MaxQuant provided excellent coverage, with a core of common peptides identified in a very robust way.

Rapid flow-based synthesis of post-translationally modified peptides and proteins: a case study on MYC's transactivation domain.

Protein-protein interactions of c-Myc (MYC) are often regulated by post-translational modifications (PTMs), such as phosphorylation, and crosstalk thereof. Studying these interactions requires proteins with unique PTM patterns, which are challenging to obtain by recombinant methods. Standard peptide synthesis and native chemical ligation can produce such modified proteins, but are time-consuming and therefore typically limited to the study of individual PTMs. Herein, we report the development of flow-based methods for the rapid synthesis of phosphorylated MYC sequences (up to 84 AA), and demonstrate the versatility of this approach for the incorporation of other PTMs (N ε-methylation, sulfation, acetylation, glycosylation) and combinations thereof. Peptides containing up to seven PTMs and phosphorylation at up to five sites were successfully prepared and isolated in high yield and purity. We further produced ten PTM-decorated analogues of the MYC Transactivation Domain (TAD) to screen for binding to the tumor suppressor protein, Bin1, using heteronuclear NMR and native mass spectrometry. We determined the effects of phosphorylation and glycosylation on the strength of the MYC:Bin1 interaction, and reveal an influence of MYC sequence length on binding. Our platform for the rapid synthesis of MYC sequences up to 84 AA with distinct PTM patterns thus enables the systematic study of PTM function at a molecular level, and offers a convenient way for expedited screening of constructs.